Answer:
4
Explanation:
if there are 1/4 cups and you need to fill a cup, you need 4
4 x 1/4 = 4/1
4/1 = 1
If the position function of a particle is a linear function of time, what can be said about its acceleration?
The acceleration of the particle will be 0.
We have position function of a particle is a linear function of time.
We have to determine its acceleration.
What is Acceleration ?The rate of change of velocity with respect to time is called Acceleration.
According to the question -
Assume that the linear function of position of a particle is as follows -
x = mt + c
Where x is displacement of particle and t is time.
Now, Differentiating with respect time, we get velocity -
[tex]$\frac{dx}{dt} = \frac{d}{dt}\;(mt+c) = m[/tex]
Differentiating again with respect time, we get acceleration -
[tex]$\frac{d^{2} x}{dt^{2} } = \frac{d}{dt}\;m = 0[/tex]
Hence, the acceleration of the particle will be 0.
To solve more questions on Kinematics, visit the link below-
https://brainly.com/question/11106650
#SPJ4
By observing the direction of current flow through the circuit, v oltage _____ can be determined.
Voltage polarity can be determined by the direction of current flow through the circuit
What is voltage polarity?All voltages and currents possess both magnitude and polarity. One current flows through the entirety of a series circuit with its polarity flowing from the negative battery terminal to the positive battery terminal. Polarities are also seen in voltage dips across loads. Utilizing the electron current's direction as a starting point is the simplest method for determining these polarities. The voltage is then negative where the electron current enters the load (Figure 31). No matter how many or what kind of loads are present in the circuit, this remains true. The potential drop is opposite of the source across the load. In opposition to the source voltage, the voltage dips lower it for the other loads.
to know more about voltage polarity visit:
https://brainly.com/question/14093967
#SPJ4
Which term best describes a soft drink?
a) heterogeneous mixture
b) pure substance
c) homogeneous mixture
d) compound
A soft drink is a homogeneous mixture.
All of the ingredients in a homogeneous mixture are dispersed equally, and in soft drinks, ingredients including sugar, carbon dioxide, and water combine to produce a single phase. A soft drink is therefore an uniform composition.
Mixtures are the combination of substances ?A mixture could be homogeneous or heterogeneous.
A mixture refers to a combination of two or more substances that are not chemically combined together. They may be solids, liquids or gases.
A mixture may be composed of substances in the same phase or different phases. If substances are combined in the same phase to form a mixture then the mixture is homogeneous. If substances in different phases combine to give a mixture then the mixture is heterogeneous.
Examples of homogeneous mixtures are salt and water solutions while examples of heterogeneous mixtures are sand and water as well as oil and water.
To learn more about homogeneous , visit :
https://brainly.com/question/24898889
#SPJ4
If the maximum energy given to an electron during compton scattering is 30 kev, what is the wavelength of the incident photon?
Required wavelength is λ = 0.0119 nm
The Compton effect in physics is defined as the phenomenon that arises when a specific beam is dispersed on a specific particle with an increase in wavelength.
Equation :Given;
The campton scattering is k = 30 kev
The speed of light is c = 2.9979 X 10 ⁸ m/s
The planck's constant is h = 6.626 X 10⁻³⁴
The expression from Campton shift is given by,
λ' - λ = λc (1 - Cos∅)
Here, ∅ is the angle of scattering whose value is 180° for maximum energy transfer and λc is the campton wavelength whose value is
λc = h/mc
substitute the values in the above expression
λ' - λ = λc (1 - Cos 180°)
λ' - λ = 2 (h/mc)
Here, m is the mass of electron
On rearing the above expression
λ' = λ + 2 (h/mc)
The expression from conservation of energy is given by,
E - E' = k
(hc/λ) - (hc/λ') = k
hc((λ' - λ)/λλ') = k
hc ((λ' - λ)/k) = λλ'
Here E and E' are the initial and final energy of electron
substitute the values in the above equation
hc (2(h/mc)/k)) = λ (λ + 2 (h/mc))
λ² + (2h/mc)λ - 2h²/mk = 0
λ² + [tex]\frac{2(6.626X10^{-34}Js)}{(9.11X10^{-31}kg) (2.997X10^{8}m/s ) }[/tex] λ - [tex]\frac{2(6.626X10^{-34}Js)}{(9.11X10^{-31}kg) (30X10^{3}evX\frac{1.6X10^{-19} }{1ev} J) }[/tex] = 0
λ² + (4.85X10⁻¹²)λ - (2X10⁻²²) = 0
On solving the above expression
λ = 1.19 X 10⁻¹¹ m
λ = (1.19 X 10⁻¹¹ m X 10⁹ nm/1m)
λ = 0.0119 m
Thus, required wavelength is λ = 0.0119 nm
Learn more about the Wavelength with the help of the given link:
https://brainly.com/question/12924624
#SPJ4
What is the value of gravitational constant G
Ph=4.390 write the henderson-hasselbalch equation for a propanoic acid solution (ch3ch2co2h, pka=4.874). 4.390
Answer:
a) [A⁻]/[HA] = 0.227b) [A⁻]/[HA] = 0.991c) [A⁻]/[HA] = 2.667Explanation:In the Henderson-Hasselbalch equation, HA stands from an acid an A⁻ stands from its conjugate base, as follows:CH₃CH₂CO₂H = HACH₃CH₂CO₂⁻ = A⁻pH = pka + Log [A⁻]/[HA]pH = 4.874 + Log[CH₃CH₂CO₂⁻]/[CH₃CH₂CO₂H](a) 4.23 = 4.874 + Log [A⁻]/[HA]-0.644 = Log [A⁻]/[HA] = [A⁻]/[HA]0.227 = [A⁻]/[HA](b) 4.87 = 4.874 + Log [A⁻]/[HA]-0.004 = Log [A⁻]/[HA] = [A⁻]/[HA]0.991 = [A⁻]/[HA](c) 5.30 = 4.874 + Log [A⁻]/[HA]0.426 = Log [A⁻]/[HA] = [A⁻]/[HA]2.667 = [A⁻]/[HA]
Explanation:
TRUE or FALSE
Organs are composed of multiple tissue types.
Answer:
TRUE
Explanation:
Organs are made of two or more tissue types to allow them to function.
Hope this helps! :D
The density of a 4.0 cm3 sample of a metal is 11.3 g/cm3. what is the density of 8.0 cm3 sample of the same metal?
The density of 8.0 cm³ sample of the same metal is 5.65g/cm³.
The density of a sample or a body is defined as, the density of a body is the amount of mass per unit volume . It is denoted by ρ. & its unit is kg/m³.
Density ρ = M/V
where, M is mass and V is volume of the body.
Solution,
Given here,
The density ρ₁ of volume V₁ & the density ρ₂ of volume V₂ of same metal therefore,
ρ₁ = 11.3 g/cm³
V₁ = 4.0 cm³
V₂ =8.0 cm³
ρ₂ =?
ρ₁ × v₁ = ρ₂ × v₂
ρ₂ = ρ₁ × v₁ /v₂
ρ₂ = (11.3 g/cm³× 4.0 cm³)/8.0 cm³
ρ₂ = 5.65 g/cm³
The density of sample of the same metal is 5.65 g/cm³
To know more about density
https://brainly.com/question/14376469
#SPJ4
Find the work done when a constant force f = 19 lbs moves a chair from x = 1.9 to x = 4.6 ft. along the x -axis.
The work done is 51.3 lb ft.
Stepsf = 19 lbs
moves a chair from x = 1.9 to x = 4.6 ft
W = [tex]\int\limits^b_aF {x} \, dx[/tex]
W = 51.3 lb ft
The work done is 51.3 lb ft.
Every time a force pushes something over a distance, work is done.
By multiplying the force by the distance moved in the force's direction, you may determine the energy transferred, or work done.
Energy transmitted equals work done, which is force times the distance travelled in the force's direction.
What is the method of work?The work W is equal to the force f times the distance d, or W = fd, to mathematically describe this idea. The work is W = fd cos if the force is applied at an angle of to the displacement.learn more about work done here
https://brainly.com/question/25573309
#SPJ4
sketch the graph of density against temperature of water between 0°c and 10°c
Answer:there is the scetch in the picture
Explanation:
Complete the sentences to describe the difference between static and dynamic equilibrium.
An object in equilibrium has a net force of
. Static equilibrium describes an object at
having equal and balanced forces acting upon it. Dynamic equilibrium describes an object in
having equal and balanced forces acting upon it.
To complete the sentences, we have
An object in equilibrium has a net force of zeroStatic equilibrium describes an object at rest having equal and balanced forces acting upon it. Dynamic equilibrium describes an object in motion having equal and balanced forces acting upon it.What is equilibrium?Equilibrium is the phenomenom in which no net force acts on an object.
What is Static Equilibrium?Static equilibrium is equilibrium is which the body is at rest and has equaland balanced forces acting on it.
What is Dynamic Equilibrium?Dynamic equilibrium is equilibrium is which the body in motion and has equaland balanced forces acting on it.
So, to complete the sentences, we have
An object in equilibrium has a net force of zeroStatic equilibrium describes an object at rest having equal and balanced forces acting upon it. Dynamic equilibrium describes an object in motion having equal and balanced forces acting upon it.Learn more about equilibrium here:
https://brainly.com/question/27965641
#SPJ1
On hoods where sashes open vertically, work with the hood sash in the _____ position
On hoods where sashes open vertically, work with the hood sash in the lowest position.
What Is A Sash On A Fume Hood?In the event of a fire, the fume hood sash offers a containment space. It functions as a blast barrier. The sash itself, together with the bypass grill above the sash, controls the fume hood's airflow properties. The sash's position does regulate the air velocity traveling through the fume hood, even if it has no effect on the amount of air passing through the fume hood. Air velocity is another element that affects chemical vapor capture. Raising the sash reduces the capture velocity, allowing vapors to start flowing over the sill and into the room's air.
To know more about hood, visit;
https://brainly.com/question/28014306
#SPJ4
Driving at a speed so fast that a driver cannot stop within the distance he/she can see with the use of headlights is called:________
Driving at a speed so fast that a driver cannot stop within the distance he/she can see with the use of headlights is called ___Overdriving headlights____
What is Overdriving headlights ?When a driver's sight is compromised by fog or darkness yet they continue to drive at a pace that prevents them from being able to stop in time to avoid objects in the road, it is sometimes referred to as "overdriving your headlights."
The best option when driving in rain, snow, or fog is to use your low beam headlights. Your high beams will just reflect back off the fog when it's foggy, making it even harder to see in front of you. Ideal conditions, such a clear day on dry roads, are where speed limits are posted.Using your headlights too much means. You cannot halt in the glow of your headlights in the distance. Drivers should proceed with caution if an approaching car's lights blind them. Examine the right.Learn more about Overdriving headlight here:
https://brainly.com/question/14310752
#SPJ4
You accidentally drop an eraser out of the window of an apartment 15 m above the groun
e. How long will it take for the Eraser to reach the ground?
Answer:
1.8 seconds
Explanation:
Ignoring air friction
d = 1/2 at^2
15 = 1/2 (9.81) t^2 shows t = 1.75 = 1.8 seconds
The coupling constant (j) for bromoethane is 7 hz when the 1h nmr spectrum is acquired at 250 mhz. what is the coupling constant between these protons when the spectrum is acquired at 500 mhz?
The coupling constant between these protons when the spectrum is acquired at 500 MHz is 7Hz.
Coupling Constant:
The coupling constant of a molecule changes when the molecular structure of the component varies. Thus the coupling constant of a particle doesn't depend on the strength of the field and other factors.
Given that,
The coupling constant of bromoethane when the spectrum acquired is
J=7Hz.
The frequency acquired for the coupling constant is f=250MHz
The coupling constant of a molecule is independent of the resolution thus if the resolution of the molecule is either 250 MHz or 500 MHz or any other value the coupling constant remains the same. It only varies when the molecular structure of the element changes.
Therefore,
Thus the coupling constant of Bromoethane at 500 MHz is 7Hz.
To know more about "spectrum"
Refer this link:
https://brainly.com/question/23423065
#SPJ4
A wire rope sling with a strength of 10,000 pounds and a total working load of 2,000 pounds has a design factor (multiplier) of ___.
The design factor or multiplier of the wire rope is 5.
What is design factor?
Design factor means the ratio of the ultimate failure strength of a member or piece of material or equipment to the actual working stress or intended safe load.
The design factor or multiplier of the wire rope is calculated as follows;
D.F = maximum strength / load
D.F = 10,000 / 2000
D.F = 5
Thus, the design factor or multiplier of the wire rope is 5.
Learn more about design factor here: https://brainly.com/question/8776638
#SPJ1
Astronomers have not yet been able to detect planets outside our solar system. true false
Julian is having trouble coping with stress and setting goals. what is he most likely struggling with?
Julian is having trouble coping with stress and setting goals. He is most likely struggling with emotional heath.
How we feel and think affects our emotional well-being. It is about how we feel about ourselves, how we handle difficult situations, and how we acknowledge both our own and other people's feelings.
This comprises resilience, self-acceptance, self-esteem, and the capacity to control intense emotions. Social. Friends are crucial because they make our life more enjoyable, companionable, and supportive.
Emotional stability is a state of calmness and emotional control. Resilience is the capacity to handle life's hardships. optimism: having a good outlook on life and the future. Self-esteem is the attitude you have toward oneself.
Depression, anxiety, stress, having a negative body image, grieving a loss, becoming a new parent, and other significant life changes can all have an impact on your mental and emotional well-being.
Learn more about stress:
https://brainly.com/question/26108464
#SPJ4
A variable has a mean of 1,400 and a standard deviation of 100. a. using chebyshev's theorem, what percentage of the observations fall between 1,100 and 1,700?
According to Chebyshev's Theorem, the percentage of data within k standard deviations of the mean must be at least 1 - 1/k2 for any distribution, normal or otherwise.
In this instance, the mean is 1600 and the standard deviation is 120. The boundaries are set at 1240 and 1960. 360 data points are below and above the mean here. Considering that the standard deviation is 120 and that the mean is within 3 standard deviations of that value (360/120), k is equal to 3. As a result, 1 - 1/32 equals 1 - 1/9. This is 8/9, or almost 89%.
There is a range of 1360 to 1840. Within two standard deviations of the mean, this is 240 above and below the mean. Consequently, at least a fraction of the data fall inside this range.
Learn more about standard deviation here-
https://brainly.com/question/13905583
#SPJ4
What is the x-component of the total electric field due to these two charges at a point on the x-axis?
Find the total x - component of the electric field at that point and get the resultant or the algebraic sum.
The electric field is a vector as it gives the force on a unit positive test charge placed at some distance from a charge.The electric field due to each charge at that point on the x-axis can be found using the Coulombs formula: [tex]\vec{E} = \frac{1}{4\pi\epsilon}\frac{Q}{r^2}[/tex].Then one needs to get the x-component of the electric field at the point due to each charge using the concept of the resolution of forces. Once the x-components are found, one needs to get the resultant or the algebraic sum of them to calculate the x-component of the total electric field.For extra knowledge, how to find the components of a given vector can be found here: https://brainly.com/question/28524840#SPJ4
If the cart's speed is 0.5 m/s and the puck's speed is 0.45 m/s, what are the two relative velocities?
0.05 m/s and -0.05 m/s
0.95 m/s and -0.95 m/s
0.95 m/s and -0.05 m/s
0.05 m/s and 0.95 m/s
The cart's speed is 0.5 m/s and the puck's speed is 0.45 m/s is 0.05 and .95m/s
Given:
A=The cart's speed is 0.5 m/s
B=The puck's speed is 0.45 m/s
Relative velocity formula =
[tex]V_{AB}=V_{A}-V_{B}[/tex]
[tex]V_{AB}=.5-.45=.05\\[/tex]
[tex]V_{BA}=V_{B}-V_{A}[/tex]
=.5+.45=0.95
The velocity of an object in respect to another object is defined as relative velocity. It is a measure of how rapidly two items move in relation to each other. In physics, relative velocity is significant because it explains how objects move and interact with one another. Many different sorts of interactions can have their relative velocity quantified. The velocity of an object in respect to another object is defined as relative velocity. It is a measure of how rapidly two items move in relation to each other. In physics, relative velocity is significant because it explains how objects move and interact with one another.
To learn more about Relative Velocity from the given link :
https://brainly.com/question/19260269
#SPJ9
What is the minimum diameter of a steel wire if it is to support a mass of 80 kg? the elastic limit of steel is 5.0*10^8 pa
The minimum diameter of a steel wire is 1.41mm
STRESS : The restoring force per unit area. unit of stress is N/m²
It is denoted by σ
σ = F/ A
Where σ = stress
F = force
A = area
force = ma
Area of a steel wire is πr²
2r = d
so area becomes
π(d/2)² =πd²/4
here , mass = 80kg
elastic limit = 5.0×10⁸kg
using these values
σ = mg/ πr²
5×10⁸ = 80×10³ × 9.8/ π*d²/4
π *d²/4 = 784 ×10³ / 5×10⁸
= 156.8 ×10⁻⁵
d² = 19.9×10⁻⁵
d = 1.41 mm
The minimum diameter of a steel wire is 1.41mm
To know more about the elasticity :
https://brainly.com/question/28447665
#SPJ4
Baking soda and vinegar are mixed in a balloon. a gas is produced and the balloon expands to a volume of 1.50 l. what is the volume of the balloon in cm3? (1 l = 1 dm3; 1 dm = 10 cm)
The volume of the balloon is 1.5 x [tex]10^{3}[/tex] [tex]cm^{3}[/tex]
CalculationVolume that the balloon has expanded to = V = 1.50L
We know that 1 L = 1000 [tex]cm^{3}[/tex]
⇒ V = 1.50 x 1000 [tex]cm^{3}[/tex]
= 1500 [tex]cm^{3}[/tex] or 1.5 x [tex]10^{3}[/tex] [tex]cm^{3}[/tex]
Explanation of the reactionThere is an acid-base reaction when vinegar and baking soda are together. Baking soda is the basic, and vinegar is the acid. A gas called carbon dioxide bubbles and foams as a result of this reaction between the two.
Since the gas has nowhere else to go, it expands the balloon, causing it to self-inflate.
Use more vinegar and baking soda to make more carbon dioxide gas, which will result in a larger balloon.
The number of reactants utilized impacts the number of products produced, which is a key principle in chemical processes. The reaction ought to be largely finished once the pressure starts to drop.
To know more about the reaction of baking soda and vinegar visit:
https://brainly.com/question/26934190
#SPJ4
Homework Help!! Thsnkyouu
A. The frisbee will remain in the air for 5.88 s
B. The horizontal distance the frisbee will go is 29.4 m
A. How to determine the time the frisbee will remain in the airThe time the frisbee will spend in the air can be obtained as illustrated below:
Height (h) = 169.2 mAcceleration due to gravity (g) = 9.8 m/s²Time (t) =?169.2 = ½gt²
169.2 = ½ × 9.8 × t²
169.2 = 4.9 × t²
Divide both side by 4.9
t² = 169.2 / 4.9
Take the square root of both side
t = √(169.2 / 4.9)
Time = 5.88 s
How to determine the horizontal distanceThe horizontal distance travelled by the frisbee can be obtained as follow:
Initial velocity (u) = 5 m/sTime (t) = 5.88 sHorizontal distance (s) =?s = ut
s = 5 × 5.88
Horizontal distance = 29.4 m
Learn more about motion under gravity:
https://brainly.com/question/22719691
#SPJ1
Drag the positive or negative feedback loop on the left to each process on the right. terms may be used once, more than once, or not at all.
The order of the positive and negative feedback loops are positive, positive, negative, positive, positive, negative.
What is a feedback loop?A system component known as a feedback loop is one in which all or a portion of the output is used as input for subsequent actions. A minimum of four phases comprise each feedback loop. Input is produced in the initial phase. Input is recorded and stored in the subsequent stage. Input is examined in the third stage, and during the fourth, decisions are made using the knowledge from the examination.
Both negative and positive feedback loops are possible. Insofar as they stay within predetermined bounds, negative feedback loops are self-regulating and helpful for sustaining an ideal condition. One of the most well-known examples of a self-regulating negative feedback loop is an old-fashioned home thermostat that turns on or off a furnace using bang-bang control.
To learn more about feedback loop, visit:
https://brainly.com/question/11312580
#SPJ4
Find the electron and hole concentrations and fermi level in silicon at 300 k for boron
To find the electron and hole concentrations and fermi levels in silicon at 300 k for boron, fermi level is 9.3 x [tex]10^4 cm^-3[/tex].
Calculation and ExplanationIonization energy for boron in Si, 0.045 eV
Fermi level in silicon,
300 K at [tex]10^{15} cm^{-3}[/tex] (Boron atoms)
All boron impurities are ionized, 300K
Electron, hole concentrations and Fermi levels is found out,
The value of Na = [tex]10^{15} cm^{-3}[/tex]
np = [tex]\frac{ni^2}{nA}[/tex]
np = [tex]\frac{(9.65 x 10^9)^2}{10^15}[/tex]
np= 9.3 x [tex]10^4 cm^-3[/tex]
Fermi level is calculated,
Ef - Ev = kT ln(NV/ND)
value of kT = 0.0259 eV (300° K)
So, substitution the values
Ef - Ev = kT ln(NV/ND)
Ef - Ev = 0.0259ln (2.66 x [tex]10^{19} / 10^{15}[/tex] )
Ef - Ev = 0.0259ln (26600)
Ef - Ev = 0.0259 x 10.18
Ef - Ev = 0.263 eV
What is ionization energy?
Ionization energy, also known as ionization energy (IE) or ionization energy (British English spelling), is the minimal amount of energy needed to free the most loosely bonded electron from an isolated gaseous atom, positive ion, or molecule in physics and chemistry.
To know more about ionization energy, visit:
https://brainly.com/question/16243729
#SPJ4
The last quarter phase of the moon? rises at sunrise. rises at sunset. sets at sunset. crosses the meridian at sunrise. sets at sunrise.
The correct answer for the The last quarter phase of the moon is it crosses the meridian at sunrise .
A third quarter moon, or last quarter moon, rises around midnight and sets around noon. The Moon is nearly back to the point in its orbit where its dayside faces the Sun directly, and all we see from our vantage point is a thin curve.
The Last or Third Quarter is when we can see half of the Moon's illuminated portion and half of its shadow portion. This is why this phase is commonly referred to as Half Moon. We can only see half of the Moon because it is at a 90-degree angle to the Earth and Sun.
Learn more about phases of the moon here :-
https://brainly.com/question/2285324
#SPJ4
If your engine is flooded with gasoline, you should push the ____ to the floor and hold for _____.
a. accelerator, 5 seconds
b. accelerator, 1 minute
c. brake, 1 minute
d. brake, 5 seconds
If your engine is flooded with gasoline, you should push the brake, to the floor and hold for 5 seconds.
What is gasoline?Gasoline or petrol is a transparent, petroleum-derived flammable liquid that is used primarily as a fuel in most spark-ignited internal combustion engines. Gasoline is already considered frozen if it turns into a thick sludge or wax. To totally avoid frozen gasoline inside the car, focus on preventing the fuel line from freezing during winter. Stale gasoline can be dangerous as it contains a combination of over 150 chemicals that can destroy both animal and human lives. Gasoline vapors are heavier than air, so they settle on the ground and travel like a liquid. Because of this, they often find their way into drains, basements, and sewer lines.
Learn more about gasoline, refer:
https://brainly.com/question/639934
#SPJ4
The bar on the histogram with endpoints 60 to 120 has a height of 0.14. what does this mean?
The correct answer he bar on the histogram with endpoints 60 to 120 has a height of 0.14 means 14% of the items were lost.
A histogram is a graph that uses rectangles to show the frequency of numerical data. The height of a rectangle (the vertical axis) represents the distribution frequency of a variable (the amount, or how frequently that variable appears).
The histogram is a popular graphing tool that is used to summarize discrete or continuous data that is measured on an interval scale. It is often used to illustrate the major features of the distribution of the data in a convenient form.
Learn more about histogram here :-
https://brainly.com/question/16819077
#SPJ4
I need help with #25 PLEASEEEE!!
I DONT UNDERSTAND