WILL GIVE BRAINLY IF RIGHT
what would happen if you dropped, at the same time, particles of different density from a boat into still water

The kinetic energy of everyday-sized objects and the potential energy that results from gravity are both forms of mechanical energy.

Kinetic energy and potential energy are the two types of mechanical energy.

The quantity of potential energy a thing possesses and the amount of kinetic energy it is capable of producing determine mechanical conversion.

Regardless of potential, creating power requires energy from motion, without which many energy-generating sources would not function.

Mechanical energy is the combination of stored (potential energy) and moving (kinetic energy), and it depends on the position and velocity of an object. In other words, mechanical energy is produced when an object's kinetic and potential energy are combined.

Want to know more about mechanical energy visit the link which is given below;

https://brainly.com/question/29509191

#SPJ4

The rate of heat loss from the person in the room at 300k is approximately 140.82 Watts. As the equation for heat loss by radiation calculates the amount of energy that is being radiated from the surface of a body to its surroundings.

The rate of heat loss from a person by radiation can be calculated using the formula:

Q = σ x ε x A x (T_s^4 - T_w^4)

where:

Q = rate of heat loss (W)

σ = Stefan-Boltzmann constant (5.67 x 10^-8 W m^-2 K^-4)

ε = emissivity (0.5)

A = exposed surface area (1.7 m^2)

T_s = surface temperature (32 °C, or 305 K)

T_w = temperature of surrounding walls (300 K)

Plugging in the values, we get:

Q = 5.67 x 10^-8 * 0.5 * 1.7 * (305^4 - 300^4)

Q = 140.82 W

So, the rate of heat loss from the person by radiation is approximately 140.82 Watts.

In the example given, the person has a relatively small exposed surface area and a relatively low emissivity, so they are not radiating a large amount of energy. However, the room has walls that are at a higher temperature than the person's skin, which will result in a significant amount of heat loss.

Learn more about energy here:

https://brainly.com/question/25384702

#SPJ4

the characteristics of the a 10 L ideal gas vessel filled with it at a pressure of 10 atm and temperature of 300 K. any desired changes in the vessel's volume or pressure. 30L of liquid will be produced at constant pressure when the temperature is 200 k.

That amount of force delivered perpendicularly to an object's surface in relation to its area is known as pressure. Pressure is a force-area relationship; pressure = force area. Pascal is the SI pressure measurement (pa).

The formula for calculating pressure is P = F / A, or force for unit of the surface area. The SI unit in measuring pressure is the pascal, and the sign for pressure in physical science is p. (symbol: Pa). One Newton per sq.m of force exerted perpendicularly on a surface is equal to one pascal.

To know more about pressure visit:

brainly.com/question/29341536

#SPJ4

The frequency heard by the driver of the sports car would be 0.907 times the original frequency of the police car's siren.

The frequency heard by the driver of the sports car would be an increased pitch due to the Doppler effect. The Doppler effect describes the change in frequency of a wave in relation to an observer who is moving relative to the source of the wave. In the case of the sports car, the observer is the driver and the source of the wave is the sound of the police car's siren. The formula for calculating the frequency heard by the observer is given by:

here f is the original frequency of the siren, v is the speed of sound,[tex]v_s[/tex] is the speed of the source (the police car), and[tex]v_o[/tex] is the speed of the observer (the sports car).

Plugging in the values, we get:

[tex]f' = f * (340 + 0)/(340 + 35)\\ = f * (340)/375 \\= f * 0.907[/tex]

So ,the frequency heard by the driver of the sports car would be 0.907 times the original frequency of the police car's siren.

Learn more about frequency here:

https://brainly.com/question/5102661

#SPJ4

The more the number of the oscillations that we have the more we can have an accurate measurement.

Having a large number of oscillations in a system can increase its accuracy and stability, as well as its ability to process signals. For example, in the field of signal processing, a higher number of oscillations can result in a more detailed and accurate representation of a signal.

Additionally, in control systems, a larger number of oscillations can make the system more robust and less prone to errors.

Learn more about oscillations:https://brainly.com/question/30111348

#SPJ1

You'll get a more accurate result for the average oscillation having a large number of oscillations and decrease the level of uncertainty with your result.

Oscillation is the repeating or periodic change of a quantity around a central value or between two or more states, often in time. Alternating current and a swinging pendulum are two common examples of oscillation.

An object's mechanical oscillations are referred to as vibrations. However, oscillations also happen in dynamic systems, or to be more precise, throughout all of science. Even our heartbeat generates vibrations. Oscillators, meanwhile, are described as having motion towards an equilibrium point.

Learn more about oscillations here https://brainly.com/question/12622728

#SPJ1

The tack's tangential speed is 5.08 m/s.

The circumference of the wheel can be calculated as follows:

C = 2 * pi * r

Where C is the circumference, pi is the mathematical constant pi (approximately equal to 3.14), and r is the distance of the tack from the rotation axis (0.401 m). Plugging in the values, we get:

C = 2 * pi * 0.401 m = 2.51 m

Since the wheel is rotating at a constant rate of 2.03 times per second, the tangential speed of the tack can be calculated as follows:

v = r * omega

Where v is the tangential speed, r is the distance of the tack from the rotation axis (0.401 m), and omega is the angular velocity of the wheel, given by:

omega = 2 * pi * f

Where f is the rotational frequency of the wheel (2.03 rotations per second). Plugging in the values, we get:

omega = 2 * pi * 2.03 s^-1 = 12.7 rad/s

v = r * omega = 0.401 m * 12.7 rad/s = 5.08 m/s

So, the tack's tangential speed is 5.08 m/s.

Learn more about tangential speed here: https://brainly.com/question/4387692

#SPJ4

Answer:condenser diaphragm

Explanation:

The potential difference between you and your friend before the spark was approximately 6 volts.

The potential difference between two objects can be estimated using the formula:

V = E * d

where V is the potential difference, E is the electric field, and d is the separation distance between the objects.

In this case, the separation distance is approximately 2 mm, and the electric field for dielectric breakdown in air is 3 MV/m.

So, V = 3 MV/m * 2 mm = 6 MV * 10^-3 m = 6 V.

Therefore, the potential difference between you and your friend before the spark was approximately 6 volts.

You can learn more about potential difference at

https://brainly.com/question/24142403

#SPJ4

Yes, a car can accelerate in the direction of the east while also traveling at a westward speed. This would happen if the car was accelerating and decelerating in a westward direction.

How does an object's capacity to change direction while moving depend on the magnitude of its velocity and acceleration?

The amount of acceleration and velocity determine how easily an object can change direction while it is moving. Since the object has more momentum at a higher velocity, changing direction is more difficult. On the other hand, the faster an object can change direction, the greater the acceleration. It might not be able to, though, if the acceleration is too low.

To know more about Magnitude visit:

brainly.com/question/15681399

#SPJ4

A plane lands at an airport moving at a speed of 90.6 m/s and then slows down to a speed of 17.9 m/s2. It will take 5 seconds for the jet to come to a stop.

Given,

initial velocity u=90.6 m/s

De-accerlation(a)=-17.9 m/s²

final velocity v will be zero because it stops finally

applying the equation of motion

[v=u+at ] t is time

0=90.6-17.9t

t=9.6/17.9

t=5.06 sec

t=5 sec

hence it will take t=5sec to come

the rate at which an object's location changes in any direction. Speed is defined as the relationship between a distance and the time it takes to travel that distance.

Measurement is the most important concept in science. Using base or physical fundamental units, many measurable phenomena can be quantified. The ratio of a moving object's distance traveled to its travel time can be calculated using several quantitative elements, one of which being speed. This lesson will cover all there is to know about speed. In autos, the speed is measured by the speedometer. Odometers are employed to calculate a person's trip distance.

Learn more about Speed here:

https://brainly.com/question/29100366

#SPJ4

The world heavyweight boxing champion punches a piece of paper in midair, accelerating it from rest to 23.0 m/s in 0.060 seconds. The paper weighs 0.003 kg.

Transferring momentum is the key to receiving a punch. If you don't take action, the force of the fist striking you will be transmitted to your body. A fist has a mass of m and moves towards you at a given velocity, v. Momentum (p = mv) is equal to the product of mass with velocity (mass times velocity).m=0.003kg , v=26.5m/s  u=0(the paper is punched from rest) t=0.044s F=1.8N

An average human punch produces 360–450 pounds of force altogether, or 120–150 psi. Remember that these figures are averages, meaning that some persons fall outside of the range on both the lower and upper ends.

To know more about heavyweight visit:

https://brainly.com/question/30510018

#SPJ4

A 0.044-kg tennis ball is launched from the tee by a golf club. In order to keep things simple, let's suppose that average net pressure acting on the ball is parallel to its motion and has a magnitude of

What is the average speed of an object?

The overall distance the object covers in a given amount of time is its average speed. What is the formula for average speed? What type of quantity—scalar or vector—is average speed? A scalar value represents the average speed. Describe the average speed.

What is the average speed?

What is the average speed? A vector quantity is average velocity. The position change or displace (x) split by the intervals (t) during which the displacement happens is the definition of average velocity. The typical speed can

To know more about average visit:

https://brainly.com/question/13196529

#SPJ4

The work done during this part of its motion by the cable that lifts the elevator is 64844 Joule.

Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).

Upward acceleration of the elevator is = 1.2 m/s².

Mass of the  elevator is  = 580 kg

Displacement of the elevator = 13 m

Hence, the work is done during this part of its motion by the cable that lifts the elevator = 580 × (9.8 + 1.2) ×13 Joule

= 64844 Joule.

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ1

The minimum angle above the ground such that the ball can clear the bar is 17.9°.

The minimum angle can be found by calculating the range of the ball, which is the maximum horizontal distance it can travel.

It is given by:

R = V_0^2 * sin(2θ) / g

where

V_0 is the initial velocity,

θ is the launch angle,

g is the acceleration due to gravity (9.8 m/s^2).

R = 36.0 ft = 11.0 m, a

solving for the minimum launch angle:

11.0 = V_0^2 * sin(2θ) / 9.8

sin(2θ) = 11.0 * 9.8 / V_0^2

θ = sin^-1(√(11.0 * 9.8 / V_0^2) / 2)

There is a general assumption that a typical kick is around 20 m/s.

Therefore the minimum angle above the ground such that the ball can clear the bar is

θ = sin^-1(√(11.0 * 9.8 / 20^2) / 2) = sin^-1(0.306) = 17.9°

Learn more about launch angle at: https://brainly.com/question/23884029

#SPJ1

Complete question:

In Canadian football, after a touchdown the team has the opportunity to earn one more point by kicking the ball over the bar between the goal posts. The bar is 10.0 ft above the ground, and the ball is kicked from ground level, 36.0 ft horizontally from the bar. Football regulations are stated in English units, but convert them to SI units for this problem. There is a minimum angle above the ground such that if the ball is launched below this angle, it can never clear the bar, no matter how fast it is kicked. What is this angle?

Given that the dewpoint or absolute humidity does not fluctuate, relative humidity will be highest in the early morning when the air temperature is lowest, and lowest in the afternoon when the air temperature is highest.

The relative humidity (RH) of a water-air mixture is the quantity of water vapour present in comparison to the highest amount attainable. RH is a ratio of a specific water-air mixture's humidity ratio to the saturated humidity ratio at a given temperature (dry-bulb). It is vital to remember that the application of relative humidity is dependent on knowing both the dry-bulb temperature and the RH. The quantity of moisture in a water-air combination at 80% relative humidity at 40°C,  This is why, for example, postharvest storage recommendations include both relative humidity and temperature.

To know more about Humidity visit:

https://brainly.com/question/22069910

#SPJ4

The direction of the gravitational force acting on a satellite as it orbits the Earth is perpendicular to the displacement of the spacecraft. As a result, the Earth has done no work at all to the satellite.

We need the pull of gravity (Fg=mg F g = m g, where m represents the mass but also g is the angular velocity, for example, g=9.8 m/s2 on Earth) and the deflection in the path of the that force, which is downward and vertical in the case of gravity, in order to calculate the jobs performed by gravity.

The effort done by gravitation will be negative if the object goes uphill since the gravity's direction of motion is the polar opposite of displacement The jobs completed by gravitation will be positive if a ball travels downward since both gravity and displacement are operating properly.

To know more about gravitational force visit :

https://brainly.com/question/24783651

#SPJ4

To achieve a static equilibrium on the beam, the bucket of concrete mix should be suspended at the midpoint of the beam, directly above the cable.

This ensures that the weight of the bucket is balanced on both sides of the cable, so that the beam remains in a state of equilibrium. The bucket should also be suspended from a point that is directly above the cable, so that the force exerted by the cable is equal on both sides of the beam.

This will ensure that the beam does not tip or move from its current position. To further ensure the safety of the steel worker, the bucket should be securely attached to the beam so that it does not move around when the worker is standing on it.

Learn more about static equilibrium:

https://brainly.com/question/12582625

#SPJ4

Answer: the magnitude of the normal force is greater than the magnitude of the weight of the person. Goodluck! i hope this helps<33

Explanation:

So the jumper's beginning speed was 12.47 m/s when the best long jump was measured at 8.00m.

The pace at which an item travels or works is referred to as its speed, which is often defined in terms of distance per unit of time such as meters per second or miles per hour.

Here,

The initial speed of the jumper can be calculated using the following kinematic equation:

d = vit + 0.5a*t²

where d is the horizontal distance (8.00m), vi is the initial velocity, t is the time in the air, and a is the acceleration due to gravity (9.8 m/s^2). The time in the air can be found using the vertical displacement, which is given by:

h = visin(θ)t - 0.5at²

where h is the vertical height (0), θ is the launch angle (39°), and t is the time in the air. Solving for t in both equations and substituting into one of them, we can find the initial velocity:

vi = sqrt(2ad/cos²(θ)) = sqrt(29.88.00/cos²(39)) = 12.47 m/s.

So the initial speed of the jumper was 12.47 m/s when the best long jump is measured as 8.00m.

To know more about speed,

https://brainly.com/question/29100366

#SPJ4

Pressure and temperature, a liquid's specific heat conductivity (Cp) is approximately 4.2 J/g°C. According to this, 4.2 watt years of energy  needed to raise 1 water gram's temperature 1 degree Celsius.500 j/kg oc

In other terms, a solid's or liquid's specific heat is the amount of energy needed to increase the temperature of an unit weight of the solid by one degree Celsius. We represent it as C. The heat needed to raise the temperature for 1 kg solid or liquid by 1K is measured in S.I. units.

The specific thermal conductivity of various states of materials varies often with temperature. At 20 °C, liquid water has one of the largest specific heat capacities of any common solid (4184 J kg 1 K), whereas ice's is just 2093 J kg 1 K.

To know more about heat visit:

https://brainly.com/question/8348313

#SPJ4

The following characteristics are present in liquids with strong intermolecular forces: high boiling temperatures, high surface tension, low vapour pressure, and high viscosity.

Intermolecular forces (IMF), which is commonly abbreviated, are the attractive and repulsive forces that form between two molecules of a substance. These forces serve as a link between a substance's individual molecules.

The main causes of matter's chemical and physical properties are intermolecular forces. The protons or positive sections of one molecule are drawn toward the electrons or negative parts of another via an intermolecular force. Numerous a substance's chemical and physical properties are impacted by this force.

Intermolecular forces hold two molecules together. Physical characteristics are affected by intermolecular forces. Vapour pressure decreases when intermolecular tensions increase.

The intensity of intermolecular interactions has an impact on two attributes of substances: the boiling points of liquids and the melting points of solids. With more attraction force exists, a substance's melting or boiling point rises.

To know more about Intermolecular visit:

brainly.com/question/9007693

#SPJ4

The work done in lifting a box of 17 kg to a height of 1 m is, 167 Newtons.

The work done in lifting something is W = mgh,

where m is the mass of the object,

g is the acceleration due to gravity

and h is the height of the object.

This work is done because you are lifting the object against the force of gravity.

So in this case, mass is 17 kg and height is 1 m.

Calculate the work done using mgh formula,

W = 17 kg × 9.8 × 1 m

W = 167 N

To know more about the work done, here

brainly.com/question/13662169

#SPJ4

It would take approximately 1.746 seconds for the ball to fall to the ground from a building that is 15 meters tall.

To calculate the time it takes for a ball to fall to the ground, we can use the equation of motion under constant acceleration, which is:

h = v_0 * t + (1/2) * a * t^2

Where h is the height of the building (15 meters), v_0 is the initial velocity (0 m/s), a is the acceleration due to gravity (9.8 m/s^2), and t is the time.

Rearranging the equation and solving for t:

t = √(2 * h / a)

= √(2 * 15 / 9.8)

= √(30 / 9.8)

= √(3.06122449)

= 1.746 sec

Acceleration due to gravity, also known as "g," is a fundamental constant that represents the rate at which an object falls towards the earth due to the force of gravity. It is defined as the acceleration that a freely falling object experiences as it falls towards the earth. The acceleration due to gravity on the surface of the earth is approximately 9.8 m/s^2. This means that every second an object falls, it gains an additional 9.8 meters per second of velocity.

The acceleration due to gravity is a function of the mass of the object and the distance between it and the center of the earth. The more massive the object and the closer it is to the earth, the greater the acceleration due to gravity. The acceleration due to gravity also decreases with increasing altitude, meaning that objects fall more slowly the higher they are above the earth's surface.

To learn more about Acceleration due to gravityvisit here:

brainly.com/question/21775164

#SPJ4

Complete Question: -

For a building having a height equal to the quantity you have recorded for Day in meters (in our example 15 meters), compute the time required for the ball to fall to the ground while experiencing acceleration due to gravity (g=9.8m/s2).

Heat transport is transitory in this medium. This medium's heat transport is two-dimensional. The equation does not state if heat is generated in the medium. The equation does not define whether the medium's thermal conductivity is constant or changing.

The rate at which heat is transported by conduction through a unit cross-section area of a material when a temperature gradient exits perpendicular to the area is described as thermal conductivity. The attribute of thermal conductivity defines how easily heat passes through a substance. The higher a substance's thermal conductivity, the better it transmits heat.

Here,

The heat transfer in this medium is transient, because the temperature is a function of time (dT/dt is present in the equation). The heat transfer in this medium is two-dimensional, because temperature depends on two spatial dimensions (x and y). The equation does not specify whether there is heat generation in the medium. The equation does not specify whether the thermal conductivity of the medium is constant or variable.

To know more about thermal conductivity,

https://brainly.com/question/10542041

#SPJ4

Complete question:

2–25 Consider a medium in which the heat conduction equation is given in its simplest form as:

d^2T/dx^2 + d^2T/dy^2 = 1/a dT/dt

(a) Is heat transfer steady or transient?

(b) Is heat transfer one-, two-, or three-dimensional?

(c) Is there heat generation in the medium?

(d) Is the thermal conductivity of the medium constant or variable?

The arrow points toward the origin when an object travels at constant speed clockwise around the circle.

The term "circular motion" refers to the movement of an object along the circumference of a circle or the rotation of an object around a circle. It is known as uniform circular motion when a particle moves in a circle while maintaining a constant speed.

Any force that changes the direction of motion toward the center of a circular motion is known as a centripetal force. The part of the force that produces the centripetal force is the part that is perpendicular to the velocity.

The speed is constant in a uniform circular motion. However, the body's orientation keeps shifting. This is brought on by an acceleration that at every location is perpendicular to the direction of movement.

To know more about acceleration visit;

https://brainly.com/question/460763

#SPJ4

Answer:

trip B to C

Explanation:

The slope gives the speed. BC there is no slope. that is why stationery position

The rocket is propelled forward by thrust, which forces gases downward in the opposite direction. The weight of the rocket is the force of gravity dragging it downward and toward the centre of the Earth. A newton (N) of weight is equal to 9.8 kilogrammes of mass.

The acceleration caused by gravity is measured in units of g, where one g represents the normal pull of gravity. Early astronauts encountered launch and re-entry forces of up to 6 g or more; on liftoff from the space shuttle, more than 3 g is felt.

The conservation of momentum is the basis for how the rocket operates. The moment of the body always stays in accordance with the conservation of momentum inside a problem area.

learn more about conservation of momentum

https://brainly.com/question/7538238

#SPJ4

When doing a kinetic research utilizing the method of starting rates, the reaction is repeated several times. While the concentration of one reactant fluctuates, the other is maintained constant.

You can determine what more solute has been dispersed in the solvent by looking at the level of the solution's concentration. For instance, the concentration may be stated as 1 teaspoon of salt per 2 cups of water if you add 1 teaspoon to 2 cups of water.

Molarity, a typical measurement used for this, is utilized. Molarity (M) is calculated by dividing the volume of the solution (V) in liters by the quantity of moles for solute (n). It's critical to remember that its molarity is determined by the moles of the solute in liter fluid.

To know more about Concentration visit:

https://brainly.com/question/29312951

#SPJ4

The complete question is-

When using the method of initial rates for a kinetic study, the reaction is performed ____. One reactant concentration is kept constant, and the other _____.

Since the rate of change in velocity is referred to as the object's acceleration, we may calculate acceleration in meters/second2 by dividing velocity m² by time (seconds).

A acceleration of the cart is the frequency with which the object's velocity changes in relation to time.as stated in the issue We must determine the outcome if you divide the velocity in meters per second by the time in seconds.

The definition of acceleration is the speed at which velocity varies with function of time. Since acceleration has both a magnitude and a direction, it is a vector quantity. It is also the first derivative for velocity profile or the derivative of point with regard to time.

To know more about acceleration visit:

https://brainly.com/question/5969508

#SPJ1

The skater have kinetic energy at any point between the starting point and the lowest point on the track.

The energy an object has as a result of motion is known as kinetic energy in physics. It is described as the effort required to move a mass-determined body from rest to the indicated velocity.

The body holds onto the kinetic energy it acquired during its acceleration until its speed changes. The body exerts the same amount of effort when slowing down from its current pace to a condition of rest.

The skater have kinetic energy at any point between the starting point and the lowest point on the track.

Learn more about kinetic energy here:

https://brainly.com/question/26472013

#SPJ1