what is an example of low-quality energy? group of answer choices heat in the ocean nuclear fission food electricity gasoline

The required statement about law of conservation of momentum is true.

According to the law of conservation of momentum, The overall momentum of two or more bodies acting on one another in an isolated system stays constant unless an external force is introduced. As a result, momentum cannot be gained or lost.

True. The law of conservation of momentum states that the total momentum of an isolated system remains constant, unless acted upon by an external force. This means that the total momentum of a system, consisting of multiple objects in motion, will remain the same unless a net force is applied to the system.

The law is a fundamental principle of classical mechanics and is widely used to explain the behavior of physical systems, including collisions and other interactions between objects.

The law of conservation of momentum is an expression of the fact that momentum is a conserved quantity in an isolated system, meaning that it cannot be created or destroyed, only transferred from one object to another.

To know more about conservation of momentum visit:

brainly.com/question/3920210

#SPJ4

Explanation:

If no force is exerted on a moving object, it will continue to move at a constant velocity. This is described by Newton's first law of motion, which states that an object will remain at rest or continue to move at a constant velocity in a straight line unless acted upon by an external force. In other words, if no net force acts on an object, the object will maintain its velocity, neither speeding up nor slowing down.

When the Gaussian surface is replaced with a cube of the same volume with the same center, the net flow across the surface remains constant.

The Gaussian surface is a closed surface in three-dimensional space that may be used to compute the flux of a vector field. These vector fields might be gravitational fields, electric fields, or magnetic fields. A Gaussian surface is a three-dimensional enclosed surface used to calculate the flux of a vector field (gravitational field, the electric field, or magnetic field.) The Gaussian surface facilitates in calculating the intensity of the electric field gently due to the evenly dispersed charge. Any hypothetical closed surface's net electric flux is equal to 1/0 times the net electric charge enclosed inside that closed surface. The closed surface is also known as the Gaussian surface.

Here,

The net electric flux through any closed surface is proportional to the charge enclosed within the surface. Since the volume enclosed by both the spherical Gaussian surface and the cube is the same, the charge enclosed is also the same, and thus the net flux remains constant.

To know more about gaussian surface,

https://brainly.com/question/14810497

#SPJ4

When the potential is 100 V, the distance from the charge is 90.0 m. When the potential is 2.00 × 10² V, the distance will be 45.0 m. The result is obtained by using the formula for electric potential.

The electric potential is the amount of work energy required to move a charge from one point to another point in an electric field. It can be expressed as

V = kq/r

Where

We have a charge with

Find the distance if the electric potential is 100 V and 2.00 × 10² V!

Using the formula above, we get the distance.

V = kq/r

When the potential is 100 V,

V = kq/r

100 = (9 × 10⁹ × 1.00 × 10⁻⁶)/r

r = (9.00 × 10³)/100

r = 90.0 m

When the potential is 2.00 × 10² V,

V = kq/r

2.00 × 10² = (9 × 10⁹ × 1.00 × 10⁻⁶)/r

r = (9.00 × 10³)/(2.00 × 10²)

r = 4.50 × 10¹ m

r = 45.0 m

Hence, the distances if the electric potential is 100 V and 2.00 × 10² V are 90.0 m and 45.0 m, respectively.

Learn more about electric potential here:

brainly.com/question/16267680

#SPJ4

Time elapses between the first splash and the second splash is 4.08 seconds

Jerry throws his rock up at 20 m/s. It will decelerate at the rate of 9.8 m/s^2, until it's velocity reaches zero. At that time it will reach apogee, and begin falling. So (20 m/s)/(9.8m/s^2) = 2.04 seconds To reach max height.

After 2.04 seconds it will begin accelerating downward, again by 9.8m/ s^2. So after another 2.04 seconds, it will be at the starting point, traveling at 20 m/ s. It will then follow the same time path as Heather's rock.

So Jerry's rock will take 4.08 seconds longer than Heather's to hit the water. The height above the water is not necessary information for this problem.

Learn more about Time here:

https://brainly.com/question/26046491

#SPJ4

The energy of a photon of Red light is found to be [tex]2.92 \times 10^{-19}J.[/tex]

Photons have momentum, which is determined by the equation p=h, where h is the planck's constant. The momentum and energy of photons are correlated by the formula p=Ec, where E=hf=hc.

A photon is a microscopic particle of electromagnetic energy that resembles a light particle. The photon's energy is influenced by its frequency. Photons are essentially electric fields traveling through space. Photons have no charge and no rest mass, and they move at the speed of light. Because a photon has no mass, its kinetic energy is the same as its total energy.

[tex]E = \frac{hc}{\lambda}[/tex]

h= Planck's constant =[tex]6.626 \times 10^{-34} Joule-sec[/tex]

c= Speed of light = [tex]3 \times 10^{8}m/s[/tex]

λ =[tex]6.8\times 10^{2} \times 10^{-9}m[/tex]

E = [tex]6.626 \times 10^{-34} times 3 \times 10^{8}/ 6.8 \times 10^2 \times 10^-9 = 2.92\times10^{-19}J[/tex]

Learn more about photon here:

brainly.com/question/30107923

#SPJ4

Kinetic energy can be measured :

Kinetic energy was discovered around the seventh century. According to the Physics LibreTexts page at that time, the science of mechanics has explained about plants between two objects where the first object moves, then the second object is in a state of rest.

When the first object moves, it bumps into a second object which is stationary and the first object stops moving. However, the second object, which was initially stationary, was moving with the first object's speed when it collided with the second object.

That is, there is a certain amount of energy transferred by the first object to the second object. Thus, the first object that was initially still becomes moving. From this, the idea of this energy was born.

Learn more about kinetic energy at https://brainly.com/question/26472013

#SPJ4

Radio waves are non-ionizing, which makes them safe for MRI imaging in the medical field and beneficial for space exploration due to their ability to penetrate atmospheres.

The explanation for the above answer;

There are a number of characteristics of radio waves that make them valuable in many applications.

Radio waves' non-ionizing quality, as it relates to magnetic resonance imaging (MRI), makes them safe for use in medical diagnosis. Since radio waves are low energy and lack the power to ionize atoms or molecules, they cannot harm living things. This qualifies them for use in medical imaging, such as MRI, which produces precise images of inside organs and tissues.

The capacity of radio waves to pass through the Earth's atmosphere makes them handy for space research. Radio waves can communicate with spacecraft and can be used to investigate the Earth's atmosphere and the cosmos beyond since they can pass through the atmosphere and be reflected by the ionosphere. By detecting their radio emissions, radio waves may also be utilized to examine astronomical objects like stars and galaxies.

In conclusion, radio waves are non-ionizing, safe for medical imaging, and beneficial for space exploration due to their ability to pass through the atmosphere.

To know more about radio waves here:

https://brainly.com/question/28874040

#SPJ4

Using average mass of earth, there are approximately [tex]1.495 \times 10^{50} $atoms$[/tex] in Earth.

An object's mass and number of atoms are directly proportional to one another. The number of atoms in an object increases as its mass increases, and the opposite is also true.

You may determine an object's atomic composition by dividing its mass by the average mass of its constituent atoms. Since the average mass of the atoms in the earth is 40 u and its mass is [tex]5.98 x 10^{24} kg[/tex], it is possible to calculate the number of atoms in the earth by dividing its mass by the average mass of its atoms.

We can determine the total number of atoms in an object using this approach.

The number of atoms in Earth can be calculated by dividing the total mass of Earth by the average mass of an atom.

Using the given information, we get:

[tex]5.98 \times 10^{24} kg / 40 u \\= 1.495 \times 10^{50} atoms.[/tex]

Therefore, there are approximately [tex]1.495 \times 10^{50} $atoms$[/tex] in Earth.

To know more about Average Mass visit:

brainly.com/question/178217

#SPJ4

The distance the child covered before catching up to his friend was 0.7 metres.

To find the distance the boy travels before he catches his friend,

we need to calculate the position of the boy as a function of time.

The velocity of the boy can be calculated as the sum of his initial velocity (0 m/s) and his acceleration multiplied by time:

v = at = (2.08 m/s^2) * (1.11 s)

= 2.3 m/s

The position of the boy as a function of time can then be calculated using the following equation:

x = x0 + v0t + (1/2)at^2

Where x0 is the initial position of the boy (assumed to be 0),

v0 is the initial velocity of the boy (0 m/s), and

t is the time elapsed (1.11 s).

Plugging in the values, we get:

x = (1/2)(2.08 m/s^2)(1.11 s)^2

= 0.7 m

So the boy has traveled 0.7 meters before he catches his friend.

For such more question on distance

https://brainly.com/question/26550516

#SPJ4

The rock is in the air for 4.45 seconds, from the time it is released it until lands at the bottom of its hole.

An object begins to fall freely when it is tossed up & reaches its highest point. Gravity is the force that pulls an item toward the Earth. As a result, even after an item stops moving due to gravity at its highest point, it can still accelerate.

When something falls, gravity is the cause of the fall. That object experiences a force, which causes it to accelerate, increasing its fall velocity. the force of gravity, or how strongly the Moon pulls on anything.

To know more about Gravity visit :

https://brainly.com/question/14874038

#SPJ4

The speed of the small stone lodged in the tire is approximately 6.077 m/s and the magnitude of its acceleration is approximately 957.39 m/s^2.

First, we need to convert the rotational speed of the wheel from revolutions per minute (rev/min) to radians per second (rad/s).

w = (2 * pi * n) / 60

Where w is the angular velocity in rad/s, pi is the mathematical constant (3.14159), and n is the rotational speed in rev/min.

So,

w = (2 * pi * 120) / 60

= 2 * pi * 2

= 4 * pi rad/s

= 12.566 rad/s

The speed of a point at a distance r from the center of rotation is given by:

v = r * w

Where v is the speed and r is the distance from the center of rotation (0.48 m).

So,

v = 0.48 m * 12.566 rad/s

= 6.077 m/s

Finally, to calculate the magnitude of the acceleration of the small stone, we use the equation:

a = r * w^2

Where a is the magnitude of the acceleration.

So,

a = 0.48 m * (12.566 rad/s)^2

= 957.39 m/s^2

Rotational speed, also known as angular velocity, is a measure of the rate of change of the angular position of an object. It is expressed in units of radians per second (rad/s) or degrees per second (deg/s). In simpler terms, the rotational speed is how fast an object is rotating around its axis. The axis of rotation can be any line that passes through an object, and the direction of rotation is usually determined by the right-hand rule.

The rotational speed is a crucial concept in physics and engineering, as it affects the behavior of objects and systems. For example, the rotational speed of a car's wheels affects its speed and stability, while the rotational speed of a spinning top affects its stability and precession. In machinery, the rotational speed is an important factor in determining the efficiency and performance of equipment, such as turbines, generators, and motors.

To learn more about Rotational speed visit here:

brainly.com/question/17025846

#SPJ4

The microphone impedance of the yaesu-ft-70 dr is 2kΩ and the antenna impedance is 50Ω.

Impedance is the opposition to the alternating current, arising from the combined effect of the ohmic resistance and reactance in the circuit. The unit of Impedance is the ohm. The Ft-70Dr is a compact system with a fusion transceiver providing both a conventional analog FM operation system and the advance C4FM digital mode.

It is built for commercial grade standard for Dust and water protection, making this radio suitable for hardest environment. The frequency of Ft-70Dr is 108MHz-580Mhz, and the output power is 5 watt, with microphone impedence of 2kΩ.

To learn more about impedence:

https://brainly.com/question/30475674

#SPJ2

It is untrue to say that unpasteurized fruit juice could be polluted if the fruit used to prepare it contains or is in contact with germs.

Chemicals had been used to contaminate [=pollute] the water. Take care to prevent bacterial contamination of the wound. Avoid touching the microchip as your hands' oil will taint it. Make sure that no other color have gotten on the white paint.

Food preparation on a place that still has residues on it or the use of cleaning agents in close proximity to exposed food can both result in contamination. Before food even enters the kitchen, it may become polluted by chemicals.

To know more about contaminated visit:

brainly.com/question/8482936

#SPJ4

The average speed on the second half of the track would be 290 km/h.

This can be calculated by dividing the total distance of 1600 m by the total time it took the car to complete the lap. Since the car's average speed on the first half of the track was 210 km/h, the total time it took to complete the entire lap would be 1600 m / (210 km/h x 1000 m/km) = 7.62 seconds.

Therefore, the average speed on the second half of the track would be 1600 m / (7.62 seconds x 2) = 290 km/h.

Speed is a scalar quantity that refers to the rate of motion of an object, measured in distance units per time units. It is the magnitude of the velocity vector, which is the rate at which an object changes its position in a given direction.

Learn more about average speed:

https://brainly.com/question/3841552

#SPj4

M represents the mass of the object that is sliding, g is the velocity caused by gravity, and is the angle of inclination. The product of gravity weight and the sine of the inclination angle is the normal force, or FN.

Higher mass objects are subject to stronger gravity. Gravity lessens as distance increases as well. As a result, the closer two objects are to one another, the stronger their gravitational pull is. The Earth's mass is what generates gravity.

The force of the spring, which the mass is subjected to when it is raised, is opposite and equal to the force of gravity. We can then conclude that the springs is equivalent to and resists the gravitational force because mass would otherwise be pulled by the net force.

To know more about velocity visit:

https://brainly.com/question/18084516

#SPJ4

True, An electric field contacts the face of a circuit at a straight angle when electrostatic forces are present.

Only when there are both positive and negative charges present may electric field lines cross. When a conductor is electrostatically positioned in an electric field, the electric field was excluded from the conductor's interior.

We now have a force acting on the electrons along the surface because the electric field pulls on the charges. Due to the unbalanced nature of this force, surface currents, or the movement of charges, will result. Therefore, the electric field must emerge perpendicular to surfaces to prevent this.

To know more about electrostatic visit:

https://brainly.com/question/14889552

#SPJ4

dog food bag behind him in a 10-cm-tall fragment of a mirror. He knows his dog food bag is 0.5 meter's tall and he is 0.25 meter's away from the mirror. Fozzie's dog food bag is x=0.75m behind him.

given,

height of the mirror,h=10cm=0.1m

the distance between the observer and mirror S₁=0.25

height of the dog food bag, H=0.5m

in ΔOAB and ΔA¹B¹

OA/OA¹=h/H=AB/A¹B¹

S₁/ S₁+S₂=h/H

0.25/0.25+S₂=0.1/0.5

S₂=1m

the position of bag behind fozzie

x=S₂-S₁

x=1-0.25 m

x=0.75m => behind fozzie

A portion that has been severed or separated from another object is known as a fragment. The term "fragment" typically refers to a part that has broken off rather than one that has been softly or purposefully detached, as in The vase was smashed into a million fragments. A bone fragment is a piece of a bone that has been chipped off, often in a minor amount. Another definition of the word "fragment" is "a section or portion of something that is incomplete or separated from the total," such as a scene from a film or a musical composition. The word "fragment" can also refer to a portion, little, or scrap (regardless of whether it has been removed from a larger part).

Learn more about fragment here:

https://brainly.com/question/2034985

#SPJ4

The linear speed of the cd is 353.8 m/s. The result is obtained by using the equation of angular speed in relation to linear speed.

An angular speed is a speed of an object in rotational motion. The angular speed in relation to linear speed is

ω = vr

Where

A cd is in a rotational motion. It has angular and linear speed.

Find the linear speed!

The radius of the cd is

r = ½d

r = ½(130) mm

r = 65 mm

r = 0.065 m

We change the unit of angular speed to rad/s.

ω = 220 rpm

ω = 220 × 2π/60 rad/s

ω = 7.33π rad/s

The linear speed will be

ω = vr

7.33π = v(0.065)

v = 23/0.065

v = 353.8 m/s

Hence, the cd has the linear speed of 353.8 m/s.

Learn more about angular speed here:

brainly.com/question/30435735

#SPJ4

The meteoroid is traveling at a speed of 18.48 km/s.

The speed of the meteoroid is the vector sum of its eastward velocity (18.3 km/s) and its downward velocity (11.5 km/s). To calculate this, we can use the Pythagorean theorem:

Speed = √(18.3 km/s)² + (11.5 km/s)² = √(341.09 km²/s²) = 18.48 km/s

Therefore, the meteoroid is traveling at a speed of 18.48 km/s.

Speed is a measure of how quickly an object is moving in a certain direction. It is usually expressed in terms of distance traveled per unit of time, such as meters per second or miles per hour. Speed is the magnitude of velocity, which is the rate of change of an object's position in a particular direction. It is a scalar quantity, meaning that it has no direction associated with it.

Learn more about speed:

https://brainly.com/question/13943409

#SPJ4

The frequency of an electromagnetic wave is calculated using the formula f = c/λ, where c is the speed of light (2.9979 x 10^8 m/s) and λ is the wavelength (12.04 cm).

Therefore, the frequency of the microwaves emitted by a Bluetooth headset is 2.48 x 10^10 s-1.

The microwaves emitted by a Bluetooth headset are part of the electromagnetic spectrum, which is divided into different frequency bands. The microwaves used by Bluetooth headsets are in the ISM (Industrial, Scientific and Medical) band, which is specifically designed for devices that do not interfere with other communication systems or cause significant interference or harm.

The ISM band is located between 2.4 and 2.5 GHz, and the exact frequency of the microwaves emitted by a Bluetooth headset may vary slightly depending on the specific model.

Learn more about electromagnetic radiation:

https://brainly.com/question/1408043

#SPJ4

The required velocity of mass 100 kg is 3.75 m/s.

The required velocity of mass 100 kg is determined by applying the principle of conservation of linear momentum as follows;

This principle states that in an isolated or closed system, the sum of the initial momentum of an object is equal to the sum of the final momentum.

momentum of the 100 kg mass = momentum of 150 kg mass

100 kg x v = 150 kg x 2.5 m/s

v = ( 375 kg m/s ) / ( 100 kg )

v = 3.75 m/s

Learn more about linear momentum here: https://brainly.com/question/7538238

#SPJ1

The complete question is below:

A mass of 150 kg is moving 2.5 m/s. How fast would an object with a mass of 100kg need to be going to hit the previous mass head on and come to a complete stop?​

Answer:

To find the direction and speed of the two cars after the collision, you need to perform a momentum analysis. The momentum of the two cars before the collision can be calculated as follows:

Momentum of car c = 1325 kg * 27.0 m/s = 35725 kg m/s (north)

Momentum of car d = 2165 kg * 11.0 m/s = 23815 kg m/s (east)

The total momentum of the two cars after the collision is equal to the sum of their momenta before the collision. This is a vector sum, which can be represented by an arrow pointing in the direction of the total momentum.

The final velocity of the two cars can be found by dividing the total momentum by the total mass.

Total momentum = 35725 kg m/s + 23815 kg m/s = 59540 kg m/s

Total mass = 1325 kg + 2165 kg = 3490 kg

Final velocity = Total momentum / Total mass = 59540 kg m/s / 3490 kg = 17.0 m/s

This velocity is directed somewhere between north and east. The exact direction and speed of the two cars after the collision depends on their initial positions and orientation, which are not specified in the question.

The car's new speed will be 11.56 m/s.

Speed is the amount of distance covered in a unit of time. It refers to how quickly an object is moving. The scalar quantity speed symbolizes the size of the velocity vector. It's lost its feeling of purpose. An object is moving quicker when it is moving at a higher speed. It is moving more slowly if the speed is lower. If something isn't moving at all, it has no speed.

The momentum is conserved here, so Initial momentum = Final momentum.

Initial mass, m = 13000 kg

Initial velocity = 16 m/s

Final mass after load = 13000 + 5000 = 18,000 kg

Based on the above point,

13000 × 16 = 18000 × v

v = [tex]\frac{208000}{18000}[/tex]

v = 11.56 m/s

To know more about speed, visit:

brainly.com/question/13262646

#SPJ4

The speed change over time is measured by the size of the velocity vector along the path. The centripetal force as it circles the instant radius of curvature is the size of the acceleration vectors normal to the path (t).

Formulas for a vector's magnitude Magnitude Formula for just a Vector with the Origin as the End Point. Magnitude Formula for just a Vector when (x1, y1) and (x2, y2) are the starting and ending points | v | = (x 2 + x 1) 2 + (y 2 + y 1) 2.

In order to create highly rough comparisons, orders in magnitude are typically used. It is primarily used when notating scientific data. One is roughly 10 times greater than the other if two integers are separated through one order of magnitude. They differ by the a factor of around 100 if they are separated over two orders of magnitude.

To know more about force visit:

https://brainly.com/question/13191643

#SPJ4

Liquid water is placed into a 3-kg polyethylene tank with a 0.2-m3 volume. Calculate the weight of a simulation model using the assumption that water has a density of 1000 kg/m3.

Describe the liquid state.

Liquid state is an alternative title. In physics, liquid is one of the three fundamental states of matter and is a transitional state between a crystalline solid and a gas. The volume retention and conformity to the form of a liquid's container are two of its most noticeable physical characteristics.

What characteristics do liquids possess physically?

liquids' physical characteristics. In addition, whenever a liquid is moved through one container to another, it keeps its volume but loses its shape (as far as there is no evaporation or temperature change). These characteristics make it simple to distinguish between the liquid state and the gaseous and solid states.

To know more about liquid visit:

https://brainly.com/question/9716973

#SPJ4

Hollow bones in birds, gills in fish and warm-blooded mammals are internal adaptations.

There are three similar definitions of adaptation in biology. First, the dynamic evolutionary process of natural selection improves the evolutionary fitness of organisms by adapting them to their environments. Second, it's a state that the populace reaches during that process.

Various strategies can be used by organisms to adapt to their surroundings. They are capable of biological adaptation, which entails changing how the body works. The bodies of people who reside in high altitudes are an illustration of biological adaptability which is essential for survival.

Learn more about adaptation here https://brainly.com/question/2396978

#SPJ1

The radio makes clicking noise due to distortion of radio wave.

Distortion in signal processing is the modification of a signal's original form (or other feature). It refers to the modification of the waveform of an information-carrying signal in an electronic device or communication channel, such as an audio signal representing sound or a video signal representing images.

Because distortion is typically undesirable, engineers work to eliminate or reduce it. However, distortion could be desired in specific circumstances.

Learn more about distortion here:

https://brainly.com/question/13626015

#SPJ1

A music producer can create an echo in a recorded song by D: duplicating the digitized sound wave.

An echo effect is created by playing a sound, and then replaying a delayed version of that same sound. To create this effect in a digital audio file, the producer would make a copy of the sound wave and then delay it by a specific amount of time, typically a few milliseconds to a few seconds. The delayed copy of the sound wave is then mixed with the original sound wave, resulting in an echo effect. By adjusting the delay time and the volume of the delayed copy, the producer can create a range of different echo effects, from subtle to pronounced.

You can learn more about  echo effect at

https://brainly.com/question/30415818

#SPJ4

The stated assertion states that if you twice the radius, the object's velocity will be cut in half.

Thus, velocity is measured in metres per second, or m/s. The metric speed unit is the metre per s (m/s). A different way to describe velocity magnitude is in centimeters per second (cm/s).

According to the following equation: v = r * ω, where v is movement, r is radius, and is angular velocity, velocity in a circle in physics is determined by the radius. In order to keep the angular velocity constant, you must reduce the velocity by half if the radius doubles.

To know more about Velocity visit:

brainly.com/question/18084516

#SPJ4