False. The number of columns in a row on a website is determined by the design and layout of the website and is not dependent on the device it is being viewed on.
The layout and design of a website can be specified using CSS and HTML, which provide a range of tools and techniques for controlling the size, position, and appearance of elements on a page. The design can be optimized for different devices and screen sizes by using responsive web design techniques, which adjust the layout and presentation of the website to fit the available screen real estate best. However, the number of columns in a row is typically specified in the design and is not automatically determined by the device being used to view the website.
Learn more about columns in a website here: https://brainly.com/question/30080363
#SPJ4
True or False?When using TRUE or FALSE as criteria in a function, they are considered to be boolean values and therefore should not be put in quotes.
True, when using TRUE or FALSE as criteria in a function, they are considered to be Boolean values and therefore should not be put in quotes.
What are Boolean Values?
The Boolean data type, frequently abbreviated as "Bool," is used in computer science and contains two potential values (typically marked as true and false). It is meant to reflect the two truth values of logic and Boolean algebra.
It bears George Boole's name, who in the middle of the 19th century developed the first algebraic system of logic. The Boolean data type is mostly used with conditional statements, which change control flow depending on whether a programmer-specified Boolean condition evaluates to true or false.
To know more about Boolean Values, Check out:
https://brainly.com/question/23943288
#SPJ4
.
which of the five internet protocol layers does an end system typically process? group of answer choices application transport network link physical
the five internet protocol layers does an end system typically process are Application Layer, Transport Layer, Network Layer, Network Interface Layer, and Hardware.
The transfer of information from sender to receiver is precisely defined by TCP/IP. The User Datagram Protocol (UDP) or the Transmission Control Protocol are the first Internet Transport Layer Protocols that application programs use to convey messages or streams of data (TCP). These protocols take the information from the application, split it up into units known as packets, add a destination address, and then transfer the packets to the Internet Network layer, the following protocol layer.
The packet is wrapped in an Internet Protocol (IP) datagram by the Internet Network layer, which also adds the header and trailer, chooses whether to deliver the datagram directly to the destination or through a gateway, and then transfers the datagram to the Network Interface layer.
When internet protocol datagrams are received, the Network Interface layer converts them into frames and sends them via a particular type of network hardware, like Ethernet or Token-Ring networks.
To know more about internet protocol:
https://brainly.com/question/27581708
#SPJ4
hajar is investigating a denial of service attack against her network. she notices that the internet control message protocol (icmp) echo replies coming into her network far exceed the icmp echo requests leaving her network. what type of attack is likely taking place? group of answer choices land
Investigating a denial of service attack on her network is Smurf Hajar. She observes that the icmp echo requests leaving her network are greatly outnumbered by the icmp echo answers entering her network.
Where is IGMP employed?One-to-many networking applications like online gaming and streaming video can be supported via IGMP, which allows for a more effective use of resources. In IPv4 networks, IGMP is employed.
A routing protocol, is IGMP?IGMP is a protocol that controls group membership; it is not a multicasting routing system. A multicast router is a router that distributes multicast packets to hosts or other routers in a network.
To know more about IGMP visit:
https://brainly.com/question/7006894
#SPJ4
Why compiler is showing error: array must be initialized with a brace-enclosed initializer
The syntax to statically initialize an array uses curly braces, like this: int array[10] = { 0 };. This will zero-initialize the array.
How to initialized the array?
The array will be initialized to 0 in case we provide empty initializer list or just specify 0 in the initializer list. Designated Initializer: This initializer is used when we want to initialize a range with the same value. This is used only with GCC compilers.There are two ways to specify initializers for arrays: With C89-style initializers, array elements must be initialized in subscript order. Using designated initializers, which allow you to specify the values of the subscript elements to be initialized, array elements can be initialized in any order.An array can also be initialized using a loop. The loop iterates from 0 to (size - 1) for accessing all indices of the array starting from 0. The following syntax uses a “for loop” to initialize the array elements. This is the most common way to initialize an array in C.To learn more about array refers to:
https://brainly.com/question/28061186
#SPJ4
g you can provide the javascript for a web page in all but one of the following ways. which one is it? a script element in the html head element that refers to a javascript file a script element in the html head element that contains the javascript a head element in the html body element that refers to a javascript file a script element in the html body element that contains the javascript
A JavaScript-containing script component in the HTML head section.
What advantages can knowing JavaScript offer?If you want to work as a web developer, understanding JavaScript is obviously a good idea. Being skilled in this program will allow you to create websites from scratch, which is a fairly useful ability to have in today's employment market, even if you don't have your heart set on a computer career. As developers incorporate more interaction and sophistication into their applications, JavaScript has grown to be an essential part of the Internet experience. Without it, there would be no search engines, e-commerce, content management systems, fully responsive, social media, or mobile apps. The popular programming language JavaScript is used to build web servers, apps, websites, and video games.
To know more about JavaScript visit:
brainly.com/question/16698901
#SPJ4
what button do you click on to end a proctored assignment?
Click Exit to complete your task when you are finished. The proctoring session ends when you leave the assignment.
When should I finish a Proctorio session?To submit the quiz after finishing it, click "Submit Quiz" in the bottom right corner of the page. In the banner message that will show up at the top of your screen, click "here" to end the Proctorio session.
Your instructor may design assignments that, at the very least, need permission before you can begin or submit your assignment attempt. One such assignment is a proctored exam.
To submit the quiz after finishing it, click "Submit Quiz" in the bottom right corner of the page. In the banner message that will show up at the top of your screen, click "here" to end the Proctorio session.
To learn more about proctoring session refer to:
https://brainly.com/question/29611043
#SPJ4
how to fix fallout 76 disconnected due to having modified game files ?
Once the game has been completely updated, restart it after checking for platform updates.
What are the fundamental files in a computer?Applications files, file systems, and system files are the three different sorts of files found on computers. The icons that appear for files in a Graphical interface (user interface), such as Windows Vista, are related to the software that opens the file.
What does a computer's file tool do?File management tools are devices used to organise files on a personal computer. Since all data is saved in files, files play a crucial role in the system. As a result, this utility software aids in browsing, searching, organising, discovering information, and swiftly previewing system files.
To know more about files visit:
https://brainly.com/question/29230375
#SPJ4
which html element defines the title of a document?
Answer:
Explanation:
The element is required in HTML documents! The contents of a page title is very important for search engine optimization (SEO)! The page title is used by search engine algorithms to decide the order when listing pages in search results.
4. Explain why it is not a good idea to use the default names given for files and folders, such as Doc1 or New Folder?
It is not a good idea to use the default names given for files and folders, such as Doc1 or New Folder, as you will not be able to recognize between different folders and files.
What are the default names for files and folders?A folder's or any other resource's initial name is given when it is created or added to a computer.
For instance, on most computers, a new folder is created with the name "New Folder" as the default. The user can alter the default names.
Therefore, Using the default names provided for files and folders, such as Doc1 or New Folder, is not recommended because you won't be able to distinguish between different folders and files.
To learn more about default names, refer to the link:
https://brainly.com/question/15447962
#SPJ1
12.5.2 Test (CST): How Do You Read in a Networked World?
Question 21 of 25
How did personal computers and the Internet affect how people access
knowledge?
A. People got better at memorizing and remembering.
OB. People relied on their friends telling them news.
C. People could easily get information at any time.
OD. People had to go to the library to find information.
People got better at memorizing and remembering.
What are personal computers?A personal computer (PC) is a single-user, single-display digital computer. A typical personal computer assemblage consists of a central processing unit (CPU), which houses the arithmetic, logic, and control circuitry of the computer on an integrated circuit.
There are two types of computer memory, main memory, such as magnetic hard disks and special optical compact discs, or read-only memory (ROM) discs (CD-ROMs and DVD-ROMs); and various peripheral devices, such as a display screen, keyboard, and mouse.
In the 1970s, when large-scale integration made it possible to build a powerful microprocessor on a single semiconductor chip, computers small and affordable enough to be purchased by individuals for use in their homes first became practical.
Therefore, People got better at memorizing and remembering.
To learn more about Personal computer, refer to the link:
https://brainly.com/question/21556710
#SPJ1
A high-level IS manager has his firm utilize sophisticated information systems to digitally design its products so that design defects can be detected and removed early in the process, reducing development cost. What business strategy does this represent?
a. focus
b. cost leadership
c. high standards
d. differentiation
The business strategy does this represent is high standards. Thus, option C is correct.
What is upper level?An upper level is manager proposes that his organization implement a system to consolidate shipping and exception data from multiple carriers so that consumers know when their purchase will ship and when it will arrive.
Company value allocation rules that do not offer incentives to commercial enterprise capabilities to lessen the value of industrial software organization program.
Therefore, The business strategy does this represent is high standards. Thus, option C is correct.
Learn more about business strategy on:
https://brainly.com/question/28561700
#SPJ1
which of the following is true? the foreign key column values in one table must have the same domain of values as the primary key column values in the related table. every table (relation) must have a foreign key. every table (relation) must have one of more primary keys.
The foreign key column values in one table must have the same domain of values as the primary key column values in the related table. It's true.
In a relational database, a foreign key is a field in one table that refers to the primary key of another table. The domain of values in a foreign key column must match the domain of values in the related primary key column. This is to ensure referential integrity, meaning that every foreign key value must correspond to an existing primary key value in the related table.
This ensures that the data in the two tables remains consistent and meaningful, even if changes are made to the data in one table. If the foreign key values did not have the same domain of values as the related primary key values, it would be possible for the foreign key values to refer to non-existent primary key values, resulting in data inconsistencies.
Learn more about a foreign key: https://brainly.com/question/13259139
#SPJ4
who invented the first anti-virus software, and when was it written?
Peter Pako, Josef Hrub, & Miroslav Trnka created the first versions of NOD antivirus in 1987. (in Czechoslovakia).
Defining antivirus?Installing an antivirus application on the laptop or smartphone is a security measure you may take to prevent malware infestation. Malware is the general term for all malicious software, including as worms, worms, Keyloggers, and spyware.
What functions do antivirus programs have?Antivirus software frequently operates in one of two main ways: whether one scans newly downloaded files and programs it compared them to attack signatures, or it checks programs already installed on your machine and looks for any unusual behavior.
To know more about Anti-virus visit:
brainly.com/question/29749028
#SPJ4
________ computers are present in such diverse applications as gasoline pumps, home appliances, and traffic lights.A) EmbeddedB) DistributedC) GridD) Convertible
Embedded computers are used in a variety of applications, including traffic signals, home appliances, and petrol pumps.
What does embedded computer mean?A software and hardware combination created for a particular purpose is an embedded system. Furthermore, embedded systems may function as a component of a larger system. The systems might be programmable or might just carry out a limited set of tasks.
What functions do embedded computers perform?Applications for embedded computers include unmanned military and defence, intelligent transportation, diagnostic devices, digital signage, and the industry automation and control, to mention a few. A embed computer can be used in many different applications.
To know more about Embedded computers visit:
https://brainly.com/question/17317566
#SPJ4
ately, your computer has been spontaneously shutting down after only a few minutes of use. what is the likely cause? (select two.)
A CPU that is too hot will randomly reset the system or occasionally crash it. A defective power source or device driver may potentially be at blame for a reboot that just happened.
What is a brief explanation of a computer?A computer is a machine that receives information (in the form of digitalized data) and processes it in accordance with a program, piece of software, or set of instructions that specify how the information should be handled.
Which definition on a computer works the best?A computers is a piece of machinery that does tasks, calculations, and other operations as directed by a software or hardware program. It has the ability to take in data as input, analyze that data, and then provide results.
To know more about Computer visit:
https://brainly.com/question/21080395
#SPJ4
which of the following statements is true? a. fraud usually results from unintentional errors. b. fraud always involves deception, confidence and trickery. c. losses from fraud are less than losses from robbery. d. fraud is more violent and traumatic than robbery.
The correct answer is An intentional falsification of the financial statements is referred to as fraud in the context of financial statement auditing.
Fraud is less likely to be committed by employees. Preventive controls and investigative controls are two categories of control operations. There are three of them: a perceived unmet financial need (motivation or pressure), a perceived opportunity to conduct fraud, and a justification for doing so. Both those in charge of the entity's governance and management have the major duty for fraud prevention and detection. The internal auditor's duties for uncovering fraud include possessing the necessary knowledge of fraud to recognise signs that fraud may have been perpetrated.
To learn more about falsification click the link below:
brainly.com/question/29212757
#SPJ4
you want to change the end date for multiple line items within your campaign and plan to use structured data files (sdfs) for bulk editing. what's the first step when using sdfs?
When using SDFs, the first thing to do is download the template and make the necessary adjustments.
What is template and its uses?In order to construct common document kinds like letters, fax forms, or envelopes, templates are pre-formatted documents. The following are some perks of using templates: Employing templates allows making documents easier.
Why would you use a template?Templates are customizable project blueprints that cut down on duplication of effort and act as a springboard for fresh work. They are already pre-formatted and include some repetitive information. You can develop custom, tasks, reports, and other items using templates rather than having to begin from scratch each time.
To know more about template visit :
https://brainly.com/question/28626946
#SPJ4
write a c code to implement all three algorithms of memory management in which you get the input from the users and display the table in output.
The correct answer is Implementation Input processes and memory blocks with sizes. Algorithm to allocate memory to blocks according to Best Fit.
The drawback of best fit is that it necessitates searching the full list. Another issue is that the remaining best-fit block fragment will probably be small and useless for incoming requests. Ideal Fit. The best fit involves assigning the lowest free partition that satisfies the request process' requirements. This algorithm looks through the whole list of available partitions first, then takes into account the smallest hole that is suitable. It next tries to locate a hole that is close to the required process size. First-fit is quicker, allowing the search for memory to end right away when a free-block of a sufficient size is discovered. Best-fit is sluggish since it needs to search through every available memory block.
To learn more about Best Fit click on the link below:
brainly.com/question/24593920
#SPJ4
you would like to create a disaster recovery strategy for your rds postgresql database so that in case of a regional outage the database can be quickly made available for both read and write workloads in another aws region. the dr database must be highly available. what do you recommend?
Option (2) is correct, Create a Read Replica in a different region and enable Multi-AZ on the Read Replica
What is database and example?A databases is a planned gathering of data. They enable the manipulation and storage of data electronically. Data management is made simple by databases. Let's use a database as an example. A database is used to hold information on people, their phone numbers, or other contact information in an online telephone directory.
What actual-world database would you use?For example, databases are used by your favorite apparel retailer, bank, restaurant, grocery store, online retailer, hospital, or mobile service provider to track customer, inventory, staff, and accounting data.
To know more about database visit :
https://brainly.com/question/6447559
#SPJ4
The complete question is-
You would like to create a disaster recovery strategy for your RDS PostgreSQL database so that in case of a regional outage the database can be quickly made available for both read and write workloads in another AWS Region. The DR database must be highly available. What do you recommend?
1) Create a Read Replica in the same region and enable Multi-AZ on the main database
2) Create a Read Replica in a different region and enable Multi-AZ on the Read Replica
3) Create a Read Replica in the same region and enable Multi-AZ on the Read Replica
4) Enable Multi-Region option on the main database
A plasma protein essential for blood coagulation is
A) albumin alpha.
B) fibrinogen.
C) immunoglobulin A.
D) metalloprotein D.
E) lipoprotein C.
B) Fibrinogen and A) plasma protein essential for blood coagulation .
What is coagulation ?Coagulation is a process in which liquid particles come together to form a solid mass. It occurs in biological and chemical systems, and is typically the result of interactions between proteins and other molecules. In the body, coagulation is primarily used to form clots in order to stop bleeding from a cut or wound. This is made possible by a series of reactions between proteins, lipids, and other substances that form a mesh-like network to form a clot.
Coagulation is an important part of the body’s clotting cascade and involves a complex system of enzymes and proteins that interact with each other. Coagulation also occurs in the food industry, where it is used to produce cheese, yogurt, and other dairy products. In addition, it is used to produce a variety of other products in the pharmaceutical, chemical, and food industries.
To learn more about coagulation
https://brainly.com/question/12077625
#SPJ1
Managers will increasingly need to understand and deal with ______. changing workplaces, ethical issues, security threats, and new technology.
First-line managers, middle managers, top managers, and team leaders are the four most prevalent categories of managers.
What Are the Different Types of Managers?These positions vary not only in terms of the tasks they perform on a daily basis but also in terms of their overall role within the company and the types of workers they supervise.
Managers at the top of the executive food chain are known as top-level managers. Chief executive officer, chief financial officer, and other positions with similar titles are frequently held by top-level managers.
Although middle managers typically answer to top-level managers, they nonetheless enjoy a high degree of autonomy in the choices they must make for their particular division or sector of the business. Numerous times, the word "director" appears in these managers' job titles. They might also serve as department heads.
For management specialists, this function is an entry-level position. The non-management staff and project team members are in direct contact with first-line supervisors. Their main responsibility is to monitor employee productivity and hold staff members responsible for attaining company objectives.
The managers who specialize in a specific activity, product, or project are called team leaders. They are responsible for managing all the logistics of their job, which may involve hiring new staff, managing onboarding, and delegating particular responsibilities to different team members.
To Learn more About managers Refer To:
https://brainly.com/question/24708179
#SPJ4
hat functions can be carried out on point cloud data using reverse engineeringsoftware? how do these tools differ from conventional 3d cad software?
Copies, duplicates, or rebuilt versions with enhancements might be the intended outcomes. The most difficult part of the reverse engineering procedure is extracting the precise geometry. More advanced technology like computed tomography or 3D scanners may also be employed for this step.
What is Reverse Engineering: How to Use Cloud of Points Effectively?Reverse engineering is the process of disassembling a part or assembly that already exists in order to gain knowledge from it in the context of mechanical engineering. Copies, duplicates, or rebuilt versions with enhancements might be the intended outcomes.The most difficult part of the reverse engineering procedure is extracting the precise geometry. More advanced technology like computed tomography or 3D scanners may also be employed for this step.A cloud of points without any topological information is collected as data while an item is being scanned. The part's outside surface is often represented by a random distribution of disconnected points. A CAD or FEA platform cannot use these data as raw models directly.The obtained scanned data must therefore be processed, cleaned, and repaired.Although the mesh associated with the scanned object may appear to be a zero thickness mesh model with shell elements, most scanners generate a cloud of points in the form of an.stl file (also known as an orphan mesh). Particularly in situations when 3D solid models are required, it is fairly essential to use a manual technique to extract the 3D body linked to the scanned item or assembly.To Learn more About reverse engineering procedure Refer To:
https://brainly.com/question/28152298
#SPJ4
you have a windows 10 computer that is shared by multiple users. you want to allow non-administrative users to install devices that use third-party drivers. users should be able to install the device without prompts for administrative credentials. users should only be able to install devices that use the drivers that you specifically identify. you copy the necessary drivers to the computer. you configure the device path registry key to identify the folder where the drivers are located. a standard user logs on and tries to install the device. they receive a prompt for administrative credentials. what should you do?
In order to allow non-administrative users to install devices that use third-party drivers without prompting for administrative credentials, you need to enable driver installation for non-administrators. To do this, you can use the Group Policy Editor.
What is non-administrative users ?Non-administrative users are those who do not have administrative privileges on a computer system. They do not have access to the system’s most important functions and settings and are limited in their ability to make changes to the system, install applications, or access system resources. Non-administrative users typically have limited access to files or folders, and may be prevented from downloading or installing software or making changes to the system. Non-administrative users may be referred to as standard users or guest users, depending on the system.
Open the Group Policy Editor and navigate to Computer Configuration > Administrative Templates > System > Driver Installation. Enable the policies titled “Allow non-administrators to install drivers for these device setup classes” and “Code signing for device drivers”. Set the “Allow non-administrators to install drivers for these device setup classes” policy to “Enabled” and specify the folder path where the drivers are located. Set the “Code signing for device drivers” policy to “Enabled”.
To learn more about non-administrative users
https://brainly.com/question/29554975
#SPJ4
what is the average length of a side in the shape made from the file datatest4.txt whose contents are shown below (truncate your answer to two decimal places)?
The correct answer is In the shape created from the contents of the file datatest4.txt given below, what is the average length of a side Shorten your response to two decimal places.
The majority of desktop PCs have a three-year minimum lifetime. However, the bulk of computers only endure five to eight years on average, depending on the updating components. Maintenance is particularly crucial due to the damaging impact the sand can have on Computer parts.Although every circumstance is unique, the typical desktop PC should last between three and eight years. Due to the more room inside the box, desktops typically run longer than laptops. How much screen time is considered healthy for adults? According to experts, adults should limit their interactive screen use far outside work to those under two hours. Any extra time should be used for exercise rather than passively watching screens.
To learn more about average length click on the link below:
brainly.com/question/24406316
#SPJ4
what factors should you consider when positioning input and output devices? a.ensure that there is proper lighting on your desk to illuminate the screen. b.ensure that there is enough room on your desk to stack them on top of each other. c.ensure that the monitor is located at the edge of the desk to maximize work area. d.ensure that they can be used without exerting strain, especially on the arms / wrists and back / neck.
When positioning input and output devices, consider ergonomics, desk space, lighting, monitor placement, cable management, and user comfort to create a comfortable and efficient work environment.
When positioning input and output devices, there are several factors to consider, including:
Ergonomics: Ensure that the devices can be used without exerting strain, especially on the arms, wrists, back, and neck.Desk space: Ensure that there is enough room on your desk to place the devices without crowding.Lighting: Ensure that there is proper lighting on your desk to illuminate the screen, reducing eye strain.Monitor placement: Ensure that the monitor is positioned at the correct distance from the user and at the appropriate height, reducing neck and eye strain.Cable management: Ensure that cables are neatly organized and do not impede the use of the devices.Comfort: Ensure that the devices are positioned in a way that allows the user to comfortably reach them and work for extended periods of time.By considering these factors when positioning input and output devices, you can create a comfortable and efficient work environment that helps reduce the risk of repetitive stress injuries and other workplace health issues.
Learn more about Cable management here:
https://brainly.com/question/29637293
#SPJ4
you issue a transmission from your workstation to the following socket on your lan: 10.1.1.145:53. assuming your network uses standard port designations, what application layer protocol are you using? group of answer choices a http b dns c tcp d ip e hdcp
Transmission Control Protocol (TCP) is a trendy that defines how to establish and hold a community dialog via which purposes can exchange data. TCP works with the Internet Protocol (IP), which defines how computer systems ship packets of data to every other.
Which port ought to he use in such a scenario so that the required encryption can be provided?HTTPS is invulnerable and is on port 443, whilst HTTP is unsecured and accessible on port 80 Information that travels on the port 443 is encrypted using Secure Sockets Layer (SSL) or its new version, Transport Layer Security (TLS) and therefore safer.
What are the 5 layers in the Internet Protocol stack?The TCP/IP mannequin is primarily based on a five-layer model for networking. From backside (the link) to pinnacle (the person application), these are the physical, facts link, net- work, transport, and software layers.
Learn more about issue a transmission here;
https://brainly.com/question/16950965
#SPJ4
what method should never be used to thaw food? place the item in the cooler place the item on a prep counter microwave the item cook the item
Placing the item on a prep counter should never be used to thaw food. It can cause bacteria to grow and create a food safety hazard.
Placing the item on a prep counter is a method that should never be used to thaw food. This method can lead to food safety hazards as it can cause bacteria to grow and multiply rapidly on the surface of the food. Bacteria can grow between 40°F and 140°F, which is known as the "Danger Zone." When food is thawed at room temperature, it can reach these temperatures, which can cause bacteria to grow and multiply. This can cause foodborne illness and spoil the taste, texture, and nutritional value of the food.
Instead of placing food on a counter to thaw, it is recommended to use the refrigerator, microwave, or cook the item methods. When thawing food in the refrigerator, it is important to allow enough time for the food to thaw safely and thoroughly. When thawing food in the microwave, it is important to cook the food immediately after thawing to prevent bacteria from growing. When cooking the food to thaw, it is important to follow safe cooking practices and cooking temperatures to ensure the food is thoroughly cooked and safe to eat.
Learn more about food here:
https://brainly.com/question/10155625
#SPJ4
how are the full mla citations organized on a works cited page?
The full MLA citation implies you must go through your article to ensure that the in-text citations are correctly attributed to the conclusion.
What is MLA citation?The acronym for 'Modern Language Association' is MLA. It is a style of writing that is typically favored for language, literature, liberal arts, sociology, and other humanities fields. The Modern Language Association is regarded for fostering literature and language studies.
Citing a website in MLA necessitates citing a specific page on the website for clarity and accuracy. Here is an example of how to reference a website in MLA format:
Begin by determining who wrote the content on the website.If there is no author, start with the title, which must be enclosed in quotation marks.The website should then be named in italics, followed by a comma.The identity of the publisher must then be included. If the author is also the site's publisher, leave it out of the citation.To know more about MLA citation, visit:
https://brainly.com/question/29759224
#SPJ1
suppose a dynamic array currently stores 8 elements, and its capacity is 8. after removing 5 elements from it, what are the values of size and capacity?
If a dynamic array initially holds 8 elements and has a capacity of 8, the array's size will be 3 when 5 elements are removed (i.e., it will contain only 3 elements). However, the array's capacity .
is determined on how the dynamic array is implemented. If the dynamic array implementation contains a method for reducing capacity when the array size lowers, then the capacity may be lowered as well. For example, if the implementation decreases the capacity by half when the array size is less than or equal to half of the current capacity, the array capacity will be lowered to 4 (i.e., half of the starting capacity of 8) if 5 items are removed. However, If the implementation does not lower the capacity as the array size drops, the capacity will stay at 8 even if the array only includes 3 elements.
learn more about elements here:
https://brainly.com/question/13025901
#SPJ4
true/false: when a c expression is evaluated, binary operations are performed before unary operations.
False. In C, unary operations are performed before binary operations unless parentheses are used to indicate otherwise.
In C, the order of operations follows the rules of operator precedence and associativity. Operator precedence determines the order in which operations are performed without parentheses. Unary operations (such as unary plus, negation, and dereference) generally have higher precedence than binary operations (such as addition, subtraction, and multiplication).
For example, in the expression -5 + 3, the negation operator (-) will be applied to 5 before the addition operator (+) is applied to the result and 3. The expression will be evaluated as (-5) + 3, yielding -2.
However, if the expression -(5 + 3) was intended, parentheses can be used to change the order of operations: -(5 + 3) will be evaluated as -8.
In short, while unary operations generally have higher precedence than binary operations, using parentheses allows you to specify the order of operations in an expression.
Learn more about unary operations here: https://brainly.com/question/13814474
#SPJ4