The work done in moving a block across a rough
surface and the heat energy gained by the block can
both be measured in

There are three degrees of freedom in a basic solid. Only translational (DOFs) are supported by solids at each node.

In statistics, df = N-1 is the equation that is most frequently used to calculate degrees of freedom. Use this number to find the equation's critical values in a mean value tables, which in turn establishes the results' statistical significance.

The largest number of operationally independent variables is, values with the freedom to change—in the data sample is referred to as the degree of freedom. If there is a remaining requirement for the data sample, particular data specimen items must be picked after the degrees of freedom amount has been decided.

To know more about Degree of Freedom visit:

https://brainly.com/question/29805667

#SPJ4

The ball will land 12.3 meters away from the point on the ground directly under the release point. This can be expressed mathematically as:

The radius of the wheel is 10.0 m, so the diameter of the wheel will be 20.0 m. the circumference of the wheel can be calculated as follows.

[tex]C=2\pi r\ \\ =(2\pi )(10m)\\ =62.831m[/tex]

The speed of any point of the wheel can be determined as

[tex]v=C/t \\\=62.831m/10s\\=6.283m/s[/tex]

Now, the following formula can be used to determine how long it takes the ball to move vertically a distance equal to the wheel's diameter.

[tex]s=ut+1/2gt^{2} \\ where, u = initial speed = 0 \\So,\\(20.0m)=(0)t+1/2(9.8m/s^{2} )t^{2} \\t^{2} = (20m)(2)/(9.8m/s^{2} )\\t=2.01s\\[/tex]

The ball will now touch the ground at this moment. The following formula can be used to determine how far the point traveled during this period.

[tex]D=(6.283m/s)(4.081s)\\\\=12.287m\\=12.3m[/tex]

For more Questions on circumference click on:

https://brainly.com/question/18571680

#SPJ4

The rank of magnitude of electric field is given by:

point A > point B > point C.

An great approach to see electric fields is with electric field lines. They had their beginnings with Michael Faraday himself.

At one point, a field line is drawn perpendicular to the net. As a result, the direction of the electric field at any place is the same as the tangent to the electric field line.

Second, the relative strength (magnitude) of the electric field at a location is correlated with the relative density of the field lines around that point.

Learn more about electric field here:

https://brainly.com/question/26446532

#SPJ1

The distance traveled by the sperm whale at a speed of 0.9 m/s with an acceleration of 0.11 m/s² is 17.91 m

The initial speed of the sperm whale = 0.9 m/s

The acceleration of the sperm whale = 0.11 m/s²

The final speed of the sperm whale is 2.18 m/s

The distance traveled by the sperm whale can be found using the formula,

               v² = u² + 2as

where v is the final velocity

           u is the initial velocity

           a is the acceleration of the sperm whale

           d is the distance traveled by the sperm whale

Let's substitute the known values in the above equation we get

                2.18² = 0.9² + 2 x 0.11 x s

                 4.75 = 0.81 + 0.22 x s

       4.75 - 0.81 = 0.22 x s

           0.22 x s = 3.94

                       s = 3.94 / 0.22

                       s = 17.91 m

Learn more about the velocity in

https://brainly.com/question/16379705

#SPJ4

340 W is the power to push the car if  a car down the street, a truck applies 20,400 j of work over 60 seconds.

Power is defined as the rate at which work is done. It is given by the equation:

P = W / t

where P is power, W is work, and t is time.

Given that the truck applies 20,400 J of work over 60 seconds, the power can be calculated as:

P = W / t = 20,400 J / 60 s = 340 W

So the power required to push the car down the street is 340 W.

The rate of work execution is referred to as power. The equation states it as follows: 340 W is the power to push the car if  a car down the street, a truck applies 20,400 j of work over 60 seconds.

Learn more about car here

https://brainly.com/question/11733094

#SPJ4

The hour hand's angular displacement is 360 degrees in 12 hours, or 30 degrees each hour.

The angle made by the body from its point of rest at any point in the rotational motion is the angular displacement. For example- If a dancer dancing around a pole does one full rotation, his or her angular rotation will be 360°. On the other hand, he or she makes half a rotation; the displacement will be 180°.

The word displacement implies that an object has moved, or has been displaced. Displacement is defined to be the change in position of an object.

To know more about angular visit:

https://brainly.com/question/14769426

#SPJ4

The statement "The normal Force on an item is equal towards its mass m 75" must appear on every page of this textbook if it is being redistributed in print.

of destructive physical forces include those that are swift and catastrophic, including both catastrophic event and operator mistakes (such as seismic events, or rocking or falling an object), as well as those that are slower acting with a small but frequent chance for destruction (such like improper handling during studies and educational use).

The Force is a symbolism for godhood, says Jennifer Porter, a professor of religious sciences at Memorial University in Newfoundland, "that connects and inspires [people] to have a deeper devotion to the godhood defined."

To know more about Force visit :

https://brainly.com/question/1991020

#SPJ4

Joule is a measure of quantity with units kgm²/s² (option 2)

A physical quantity is anything that can be measured in the physical world. A table's length, for instance, can be measured. In this case, length is a numerical value. Your body's mass can be measured because it is a physical quantity. Time is a physical quantity, thus you can quantify the amount of time you are spending reading this book.

The International System of Units uses the joule as its unit of energy. It is equivalent to the amount of work that is accomplished when a mass is displaced by a force of one newton over a distance of one meter in the direction of the force applied.

International system base unit is kgm²/s².

Learn more about Joule here: https://brainly.com/question/25603269

#SPJ4

Explanation:

Walter Cannon challenged the James-Lange theory, criticizing it on several grounds. Which of the following is one of those criticisms? Cannon pointed out that bodily reactions are similar for many emotions, yet our subjective experience of various emotions is very different.

Galileo once felt so thrilled as his pulse rate went up while he was using his pulses as a time source to measure acceleration. He probably had better acceleration results that day.

How does acceleration function? What is it?

Any procedure where the velocity varies is referred to as acceleration. There are just two ways to accelerate: changing your speed or changing your direction, or changing both. This is because velocity is both a rate and a direction.

Is acceleration accelerating or constant?

An object is considered to be moving faster or to have an acceleration if its velocity changes. An item can occasionally alter its speed by the same quantity every time or every second. Because the speed is changing by a fixed amount every second, this is therefore known as acceleration, which is constant.

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ4

The sign of the potential energy of a system of two charged objects depends on the nature of the charges. In the case of a negatively charged object and a positively charged object separated by some finite distance, the potential energy is negative, meaning that energy is stored in the system.

To decrease the potential energy of the system, you can bring the charged objects closer together, reducing the distance between them. This reduces the electric field strength and the potential energy stored in the system.

As the charges get closer, the repulsive force between them increases, requiring more work to overcome. At some point, the charges will repel each other so strongly that it becomes difficult to bring them any closer together.

To know more about force, visit here:

https://brainly.com/question/3354744

#SPJ4

The period of the sound wave is 0.00025 second.

An example of an energy type that propagates through a medium using adiabatic loading and unloading is acoustic waves. Acoustic pressure, particle velocity, particle displacement, and acoustic intensity are crucial parameters for defining acoustic waves.

Given parameters:

Frequency of sound wave is = 4.0 kHz

We know that for wave motion:

Time period of the wave = 1/frequency of the wave

Hence,  The period of the wave is = 1/Frequency

= 1/ (4 × 10³) second

= 0.00025 second.

So, the period of the wave is 0.00025 second.

Learn more about acoustic waves here:

https://brainly.com/question/11047844

#SPJ1

The horizontal force that is required to make the shoe slide is 2.1658N.

Horizontal force = static friction

Static friction = uMg

u is coefficient of friction

g = acceleration due to gravity

M is the mass of the body that is .0425 kg.

Force required = (0.52 x 0.425 x 9.8) N

= 2.1658N

A horizontal force is a force that operates in a direction parallel to the horizon. The cycle's speed tends to slow down due to an opposing force called air resistance force, which acts in the opposite direction. Both the applied force and the air resistance force are considered horizontal forces when the direction is taken into account. Jumps and horizontal medicine ball throws can help increase the horizontal force produced. The Standing Long Jump, Standing Triple Jump, and horizontal jumps over hurdles or boxes are some of these jumps.

To learn more about force: https://brainly.com/question/12970081

#SPJ4

The length of an organ pipe can be calculated using the formula:

L = v / (2f)

where L is the length of the pipe, v is the speed of sound in air, and f is the frequency of the pipe. To find the length of the pipe, we can use the average of the two frequencies as the frequency of the pipe:

f = (550 Hz + 650 Hz ) / 2 = 600 Hz

Assuming the speed of sound in air is approximately 340 m/s:

L = v / (2f) = 340 / (2 * 600) = 0.057 m

So, the length of the organ pipe is approximately 0.057 meters.

learn more about frequencies :

https://brainly.com/question/27151918

#SPJ4

Simply put, no. Try not to be hard on you if this is the first time you've heard it; in some cases, a belief was once accurate. A bulk of energy storage units kept in fridge are basic AA, AAA, C, & D batteries.

There are three main battery kinds that may be used by consumers. They are lithium ion, nickel metal hydride, and alkaline. Each kind has benefits and drawbacks. Each of them has a unique position in the history of technology.

With the greatest energy density of just about any battery cell, lithium batteries are made of this very light metal. As a result, they have a higher energy capacity than battery systems or any other separate bat of a similar size. Additionally, they work admirably in the both cold and warm environments.

To know more about Batteries visit:

https://brainly.com/question/30078831

#SPJ4

The height of the mercury column in a barometer is directly proportional to the atmospheric pressure. As atmospheric pressure decreases, the height of the mercury column decreases. Conversely, as atmospheric pressure increases, the height of the mercury column increases.

This relationship between the height of the mercury column and atmospheric pressure is described by Pascal's law, which states that pressure applied to an enclosed fluid is transmitted equally in all directions throughout the fluid. In the case of a barometer, the mercury in the glass stem is an enclosed fluid, and the atmospheric pressure acts on it, causing it to rise or fall.

So, if the atmospheric pressure decreases, the mercury column's height will also decrease. The exact amount of change in the height of the mercury column will depend on the amount of decrease in atmospheric pressure and the specifics of the barometer setup.

Learn more about atmospheric pressure here: https://brainly.com/question/19587559

#SPJ4

A chemical change is the transformation of one substance into another, the emergence of new compounds with distinct properties, or any combination of these. It happens when two compounds mix to create a new material (synthesis or either decomposes to form more substances).

A substance is defined as matter with a certain composition and particular qualities. Everything that is pure is a substance. A substance is every pure compound. Several chemicals are: Since iron is an element, it qualifies as a material. Methane is a substance since it is a compound.

Naturally Occurring Substances: Substances that exist in the environment naturally yet nonetheless pose a risk to businesses in terms of environmental responsibility. Examples include radon, pyrite, asbestos, mercury, arsenic, and asbestos. The majority of these materials are found while being developed or built.

To know more about Substances visit:

https://brainly.com/question/29637836

#SPJ4

An lunar eclipse can only happen at certain response options.New moon is the first quarter moon.

A lunar eclipse happens when Earth passes in front of the Sun and Moon, preventing the Amount of solar radiation from striking the Moon directly.Only at full moons do lunar eclipses take place.Total, partial, & penumbral lunar eclipses are the three types that can occur.

The Moon's shadow, which it casts across the Earth whenever it is directly between the Sun and the planet, causes a solar eclipse.Solar eclipses can only happen with a new moon.

To know more about New moon visit:

https://brainly.com/question/2628794

#SPJ1

The resolution limit for a circular aperture of diameter d for a light of wavelength λ is given by the formula, d = 1.22λ/D, where D is the separation between two point sources. So for the given situation,

d = 1.22 x 442 x 10^-9 m / 139 m = 1.22 x 442 x 10^-9 m / 139 m.

Solving for D, we get

D = 1.22 x 442 x 10^-9 m / (3.4 x 10^-3 m) = 1.22 x 442 / 3.4 x 10^-6 m = 1.22 x 442 x 10^6 / 3.4 m = 0.0635 m. Therefore, the two-point sources must be separated by 0.0635 meters to be just resolved by the eye.

The result of imaging a point object through a circular aperture, such as our eye's lens or iris, is not a point but a diffraction pattern. This is true, especially when the object's size and the light's wavelength are comparable.

Concentric circles that become dimmer as we go away from the center are formed by a circular aperture. They are referred to as Airy discs.

For more questions like Circular aperture visit the link below:

https://brainly.com/question/20308299

#SPJ4

The range of the bullet is 1,125 m.

The range of the bullet is the maximum horizontal distance travelled by a projectile and it can be calculated by applying the following formula.

R = ( u² sin ( 2θ ) / g

where;

The range of the bullet is calculated as follows;

R = ( u² sin ( 2θ ) / g

R = ( 150² sin ( 2 x 15 ) / 10

R = 1,125 m

Learn more about range of projectile here: https://brainly.com/question/12870645

#SPJ1

When a substance moves below its freezing point, it undergoes a phase change from a liquid to a solid.

When a substance moves above its boiling point, it undergoes a phase change from a liquid to a gas.

When a substance moves below its freezing point, it undergoes a phase change from a liquid to a solid. This happens because the temperature is low enough that the energy of the particles in the liquid is insufficient to overcome the forces of attraction between them. As a result, they slow down, come together, and form a solid.

On the other hand, when a substance moves above its boiling point, it undergoes a phase change from a liquid to a gas. This occurs because the temperature is high enough to provide enough energy to the particles in the liquid to overcome the forces of attraction between them. The particles then move apart, form into a gas, and eventually escape into the atmosphere as a vapor.

Learn more about boiling and freezing point here: https://brainly.com/question/40140

#SPJ1

The frequency of the sound that the driver hears reflected from the wall is approximately 472.56 Hz.

To find the frequency of the sound that the driver of the car hears reflected from the wall, we need to consider the Doppler effect.

The frequency of the sound will change due to the relative velocity of the car and the sound wave.

Let f be the frequency the driver hears reflected from the wall.

Then, we can use the equation:

f = f0 * (v + vs) / (v + vr)

where f0 is the original frequency of the horn,

vs is the speed of sound, and

vr is the relative velocity of the car and the sound wave.

In this case, f0 = 415 Hz, vs = 340 m/s, and vr = 25 m/s (the car is moving toward the wall).

Plugging these values in, we get:

f = 415 * (340 + 25) / (340 - 25)

f = 415 * 365 / 315

f = 472.56 Hz

For more questions on Doppler effect

https://brainly.com/question/15318474

#SPJ4

The typical shock absorber is made to lessen both the shock, or "jounce," felt during compression strokes and the amount of rebound felt during rebound strokes.

The shock absorber uses hydraulic pressure during compression strokes to slow down and absorb the shock, or jounce, of the vehicle when it travels over bumps or potholes. The kinetic energy of the shock is transformed into thermal energy by a piston, cylinder, and hydraulic fluid, which work together to accomplish this. The shock absorber works to lessen the vehicle's rebound or bounce during rebound strokes, making the ride more comfortable. It accomplishes this by utilizing a valve to control the hydraulic fluid's flow and produce resistance, which aids in absorbing the rebound's energy.

For more Questions on shock click on:

https://brainly.com/question/5797884

#SPJ4

The intensity level of the infrasound 10 km from the source is 62.41 dB.

Low-status sound refers to sound waves having a frequency below the threshold of human audibility, also known as infrasound (generally 20 Hz). Hearing increasingly becomes less sensitive as frequency decreases, hence infrasound needs to have a powerful enough sound pressure for people to be able to hear it. Although many parts of the body may be able to detect infrasound vibrations at higher frequencies, the ear is the primary organ for hearing low-frequency sounds.

There are some uses for the term "infrasonics," which examines sound waves below 20 Hz and up to 0.1 Hz (and rarely to 0.001 Hz). Monitoring earthquakes and volcanoes, as well as mapping underground rock and petroleum deposits, are all done in this frequency range.

The intensity level of a sound decreases with the square of the distance from the source. So, the intensity of the infrasound 10 km from the source will be:

100 dB - 20 log (10 km / 5.5 m)

= 100 dB - 20 log (1818.1818)

= 100 dB - 37.59 dB

= 62.41 dB

So, the intensity level of the infrasound 10 km from the source is 62.41 dB.

To know more about infrasound, check out:

brainly.com/question/14718543

#SPJ4

To find the height of the fence, we need to find the final height of the ball after it was hit and then subtract the height of the fence.The final height of the ball can be found using kinematic equations. Using the initial velocity, acceleration due to gravity, and time elapsed, we can find the final height of the ball:h = vi * t + 0.5 * a * t^2whereh = final height

vi = initial velocity (0, since it was hit from ground level)

t = time elapsed (3.0 s)

a = acceleration due to gravity (-32.2 ft/s^2)Substituting the values,h = 0 + 0.5 * -32.2 * (3.0)^2 = 45.3 ftNext, we need to find the height of the ball 2.5 seconds after it reached its maximum height.Using the same kinematic equation,h = vi * t + 0.5 * a * t^2whereh = final height

vi = initial velocity (0, since it was at its maximum height)

t = time elapsed (2.5 s)

a = acceleration due to gravity (-32.2 ft/s^2)Substituting the values,h = 0 + 0.5 * -32.2 * (2.5)^2 = 18.825 ftFinally, subtracting the final height of the ball from the height of the fence:fence height = 320 ft - 18.825 ft = 301.175 ftSo, the fence is 301.175 ft high

(a) The relative velocity of Girl  relative to the surface of the ice is given by: v = (1.50 m/s) * (45 kg / 195 kg) = 0.45 m/s

(b) The velocity of the plank relative to the surface of the ice is given by: v = (1.50 m/s) - (0.45 m/s) = 1.05 m/s

(a) To find the velocity of the girl relative to the surface of the ice, we must consider the motion of the plank.

The plank and the girl have a combined mass of 150 kg + 45 kg = 195 kg.

Since the girl is walking to the right at 1.50 m/s relative to the plank, her velocity relative to the surface of the ice is given by:

v = (1.50 m/s) * (45 kg / 195 kg) = 0.45 m/s

(b) To find the velocity of the plank relative to the surface of the ice, we must subtract the velocity of the girl relative to the surface of the ice from the velocity of the girl relative to the plank.

The velocity of the plank relative to the surface of the ice is given by:

v = (1.50 m/s) - (0.45 m/s) = 1.05 m/s

For more questions on plank relative

https://brainly.com/question/13067704

#SPJ4

No, the electric field magnitude is zero only at the midpoint between the two charges, i.e. at a distance of d/2.

In order to determine the location of the electric field zero, we set the electric fields for each point charge to be equal to one another because that is the point at which they will cancel one another out. The electric potential does not necessarily equal zero just because the electric field is zero at a certain location. The situation of two similar charges that are spread apart is an excellent example. Even when the electric field is not zero at a given point, the electric potential can nonetheless be zero there. Because it is 0 at a point inside the solid body of the conductor, the electric field caused by induced charges at the sphere's center is zero.

To learn more about electric field click here https://brainly.com/question/8971780

#SPJ4

The average acceleration in each interval is 0.922  [tex]\frac{m}{s^{2} }[/tex], 0.922  [tex]\frac{m}{s^{2} }[/tex]

and  2.922  [tex]\frac{m}{s^{2} }[/tex].

a) for the acceleration of astronaut

Acceleration is like the angry, fire-breathing dragon of motion variables in comparison to displacement and velocity. It can be dangerous, some people find it frightening, and if it's large, it makes you pay attention. You can feel yourself accelerating in scenarios like sitting in a plane during takeoff, slamming on the brakes in a car, or speeding around a corner in a go-kart.

acceleration of astronaut = change in velocity/time

acceleration of astronaut = [tex]\frac{5.5-15}{10.3}[/tex]

acceleration of astronaut = - 0.922 [tex]\frac{m}{s^{2} }[/tex]

acceleration of astronaut is 0.922  [tex]\frac{m}{s^{2} }[/tex]to left

b)acceleration of astronaut = change in velocity/time

acceleration of astronaut =[tex]\frac{-15-(-5.5)}{10.3}[/tex]

acceleration of astronaut = - 0.922  [tex]\frac{m}{s^{2} }[/tex]

acceleration of astronaut is0.922  [tex]\frac{m}{s^{2} }[/tex]o left

c)acceleration of astronaut = change in velocity/time

acceleration of astronaut =[tex]\frac{-15-15}{10.3}[/tex]

acceleration of astronaut = - 2.922  [tex]\frac{m}{s^{2} }[/tex]

acceleration of astronaut is 2.922  [tex]\frac{m}{s^{2} }[/tex] to left

Learn more about acceleration

brainly.com/question/2303856

#SPJ4

Batteries are underpowered or dead. The power released by batteries decreases with time, causing most flashlights' illumination to gradually dim until turning out totally.

The tungsten filaments or LED in the lamp starts to glow when electricity turns it on, emitting visible light. The lamp's reflector, which is positioned around it, reflects this light.

To be sure that no debris or grime is blocking the flashlight from charging, check the USB port. To test if a fresh battery will help, try using the flashlight. Use a fresh charging cable or adapter to.

To know more about illumination visit:

https://brainly.com/question/29156148

#SPJ4