The chemical release of _________ plays a role in bonding and forming secure relationships.

If 50g of sugar is added to 100g of water at 20° C to form a solution, this would form a saturated solution with 33.33% concentration of sugar in the solution.

When 50 g of sugar is dissolved in 100g of water, it would form a saturated solution with 150g of total mass. This can be verified as:

Mass of the solute (sugar) = 50g

Mass of the solvent = 100g

Mass of the solution = 50 + 100 = 150g

Now, the mass concentration of sugar could be found as:

Mass of the solute/ Mass of the solution × 100

= 50/150 × 100 = 33.33%.

A saturated solution is one in which, at a given temperature, the maximum quantity of solute has dissolved in the solvent. A solute's saturation point is influenced by its concentration. A solute's saturation point rises with increasing concentration. This is due to the fact that more particles are accessible to dissolve in the solvent with a greater solute concentration.

To know more about saturated solution, refer:

https://brainly.com/question/23946616

#SPJ4

Adding a catalyst makes absolutely no difference to the position of equilibrium, and Le Châtelier's principle does not apply. This is because a catalyst speeds up the forward and back reaction to the same extent and adding a catalyst does not affect the relative rates of the two reactions, it cannot affect the position of equilibrium.

Inorganic chemicals, a class of water contaminants, include fertilisers.

In order to give plants the vital nutrients they require for healthy growth and development, fertilisers are compounds that are put to the soil. The three main macronutrients found in fertilisers are nitrogen (N), phosphorus (P), and potassium (K), as well as trace metals including iron, zinc, and magnesium.

Inorganic chemicals, a category of water contaminants, include fertilisers. Fertilizers include vital plant nutrients like nitrogen, phosphorus, and potassium, but if used excessively, they can have a severe effect on the water quality. The excess nutrients from fertiliser runoff can cause toxic algae blooms to proliferate and water bodies to become oxygen-depleted, which can have an impact on aquatic life and lower the quality of drinking water. Fertilizers and other inorganic compounds can also contribute to the rise in total dissolved solids (TDS) levels in water, which causes salinization and reduces the amount of available water.

To know more about fertilizers, visit:

https://brainly.com/question/8996292

#SPJ4

We can only do ideal gas law calculations when we are at standard temperature and pressure,is True.

The following is the ideal gas equation: PV = nRT Where P is the ideal gas's pressure, V is the ideal gas' volume, n is the ideal gas' molecular weight, R is the gas constant, and T is the temperature. Ideal gas law is a precise approximation of the behaviour of several gases under various situations in thermodynamics. The Ideal Gas Equation combines several empirical laws, including Avogadro's, Gay- Lussac's, Boyle's, and Charle's laws. The equation of state for a fictitious ideal gas is known as the ideal gas law. Despite its many flaws, it is a decent approximation of the behaviour of several gases under various situations.

learn more about Ideal gas law Refer:brainly.com/question/28257995

#SPJ4

The amount of protons, electrons and neutrons present in a neutral atom of gold are 79, 79, and 118 respectively.

The atomic number of a particular element, which can be discovered on the periodic table, can be employed to figure out the amount of protons in any given atom or element. Additionally, the amount of electrons in a stable, uncharged element is equivalent to the atomic number; in the case of gold, this means that there are 79 electrons.

A subatomic particle with such a negative charge is an electron. A subatomic particle that has a positive charge is called a proton. The strong nuclear force keeps protons together in the nucleus of an atom. A type of subatomic particle lacking charge is the neutron (they are neutral).

Learn more about neutral atom here:

brainly.com/question/9243197

#SPJ4

False. Rather than lactic acid, glucose is changed to pyruvic acid during glycolysis.

A 2-keto derivative of a propionic acid, pyruvic acid is the 2-oxo monocarboxylic acid. It is a byproduct of the glycolytic process. It functions as a cofactor and a fundamental metabolite. It is similar to the propionic acid in terms of function. It is a pyruvate's conjugate acid.

The simplest -ketoacid, pyruvic acid, is essential for sugar metabolism. It is the end result of the anaerobic breakdown of glucose during glycolysis. During exercise, it is converted to lactic acid in the muscle.

To know more about pyruvic acid visit :

https://brainly.com/question/13631078

#SPJ4

c. No, it is not enthalpy favored since the chemical system gains energy.

If the temperature of the water lowers while ammonium nitrate dissolves in it, the process is endothermic and heat is absorbed by the system.

Through the process of dissociation into its individual ions, ammonium nitrate readily dissolves in water. Because it was created from a strong acid (HF) and a weak base (NH3), this salt has an acidic character (HNO3). This reaction is extremely exothermic and it happens quickly.

A spontaneous reaction favors one that favors the creation of products in the environment in which it is taking place. A campfire that is roaring is an exothermic example of a spontaneous reaction. 

To know more about ammonium visit;

https://brainly.com/question/21768704

#SPJ4

In particular, atomic spectra were examined in order to ascertain atomic numbers.

A chemical element's atomic number is its position in the periodic table of elements, which places the elements in ascending order of the quantity of protons in their nuclei. As a result, the atomic number is also determined by the amount of proton, that is everytime equal to the amount of electrons in a neutral atom.

Since atomic number is constant throughout all isotopes of any element and the atomic mass varies with each isotope, an atomic number is frequently more significant than the atomic mass.

To know more about atomic number visit :

https://brainly.com/question/18771650

#SPJ4

At STP, 3 mol of gas will take up 67.2 L.

STP is defined as a temperature of 273.15 K and an absolute pressure of precisely 105 Pa. (100 kPa, 1 bar).

In a perfect world, the volume to mole ratio of a gas will be precise. The ideal gas law, also referred to as the general gas equation, employs an equation to explain the state of a fictitious ideal gas.

The ideal gas law states that the sum of the absolute temperature of the gas and the universal gas constant is equal to the product of the pressure and volume of one gramme of ideal gas molecules.

Learn more about STP:

https://brainly.com/question/29356493

#SPJ4

Energizes so D is the answer

Using a large sample in a melting point determination can cause the melting point range to be wider.

This is because it takes longer to melt more of a sample, and so the temperature range over which the melting occurs will be larger. Additionally, if the sample is not mixed properly, the melting point range can be even wider due to the presence of impurities.

This is because impurities can cause the sample to melt over a longer period of time, resulting in a wider melting point range. It is important to make sure that the sample is properly mixed before measuring the melting point range, as this can help to reduce the effects of impurities and ensure that the range is as accurate as possible.

Learn more about melting point:

https://brainly.com/question/40140

#SPJ4

PH levels affect how responsive enzymes are.Enzymes lose their ability to function when the pH is either too high or too low because this alters the charges at the specific active site of the enzyme.

Why does low pH result in decreased enzyme activity?

The protein is forced to unfold at extremely low pH levels as a result of this interference, and the enzyme is then unable to catalyse the reaction because the shape of the active site is no longer complementary to the substrate molecule. The enzyme is no longer active.

The pH of the media affects how quickly an enzyme reacts. Every enzyme has an ideal pH range where the rate of the enzymatic reaction is at its highest. The rate of an enzyme process reduces with increasing or decreasing pH. The ideal pH range for most enzymes is between pH 5 and pH 9.

Learn more about enzyme:

brainly.com/question/14577353

#SPJ4

That the pressure doubles when the gas's volume is cut in half.

If gas volume and temperature are maintained constant, the formula demonstrates that pressure and volume are inversely proportional.

This implies that if volume decreases, pressure must increase. This implies that if pressure doubles, volume must be half, and if pressure is halved, volume must be doubled in order to maintain the K value.

If the volume is doubled and the pressure is tripled, the effect on the temperature will be 3 2 = 6 times. This is because for perfect gases, the temperature is directly related to both the volume and the pressure.

For such more question on gas volume

https://brainly.com/question/27100414

#SPJ4

0.625 moles of gaseous oxygen are contained in a balloon holding 20.0 grams of oxygen.

Chemists use the mole, a highly significant measuring unit. Like a dozen eggs implies twelve eggs, owning a mole of anything indicates you possess 602,214,076,000,000,000,000,000 of that item. For exceptionally small objects like atoms, compounds, or other particles, chemists must estimate using moles.

We must divide a substance's weight by its molar mass to determine the number of moles. Oxygen gas (O2) has a molecular concentration of 32.00 g/mol.

20.0 g / 32.00 g/mol

= 0.625 mol

To know more about moles visit:

https://brainly.com/question/26416088

#SPJ4

The smallest division on a 10 ml graduated cylinder is 0.1 ml. suppose a reading was exactly on the 10 ml mark, The reading should be recorded as 10.0 ml. Because the smallest division on a 10 ml graduated cylinder is 0.1 ml, and the reading was exactly on the 10 ml mark, the most precise and accurate way to record the reading is to include all the significant digits, which in this case would be 10.0 ml.

A graduated cylinder is a laboratory glassware used to measure the volume of liquids. It has a cylindrical shape with graduated markings on the side, allowing for precise measurement of the volume of a liquid. The liquid is usually added to the cylinder until it reaches the desired volume, which can be read from the markings on the side. Graduated cylinders come in different sizes and with different increments of markings, depending on the level of precision needed for a particular application.

Here you can learn more about A graduated cylinder

brainly.com/question/30484658

#SPJ4

[A] [tex]${ }^{13} \mathrm{C}$[/tex] NMR signals: 15, 26, 126, 128, and 142 ppm ortho diethyl benzene.

[B] [tex]${ }^{13} \mathrm{C}$[/tex] NMR signals: 16, 29, 128, and 141 ppm para diethyl benzene.

[C] [tex]${ }^{13} \mathrm{C}$[/tex]  NMR signals: 16, 29, 125, 127.5, 128.4, and 144 ppm meta diethyl benzene.

In ortho diethyl benzene, 5 types of carbon atoms are present. So, 5 peaks are obtained.

In meta diethyl benzene, 6 types of carbon atoms are present. So, 6 peaks are obtained.

In para diethyl benzene, 4 types of carbon atoms are present. So, 4 peaks are obtained.

Answer:

Ortho: [A]

[A] [tex]${ }^{13} \mathrm{C}$[/tex] NMR signals: 15, 26, 126, 128, and 142 ppm

As we know that 5 types of carbon atoms present with 5 peaks are obtained.

Then it undergoes ortho diethyl benzene.

Para: [B]

[B] [tex]${ }^{13} \mathrm{C}$[/tex] NMR signals: 16, 29, 128, and 141 ppm

As we know that 4 types of carbon atoms present with 4 peaks are obtained.

Then it undergoes para diethyl benzene.

Meta: [C]

[C] [tex]${ }^{13} \mathrm{C}$[/tex]  NMR signals: 16, 29, 125, 127.5, 128.4, and 144 ppm

As we know that 6 types of carbon atoms present with 6 peaks are obtained.

Then it undergoes para diethyl benzene.

For more questions on isomers

https://brainly.com/question/14547620

#SPJ4

The molar mass of magnesium sulfate heptahydrate,MgSO₄·7H₂O is 246 g/mol. So option D is correct.

Molar mass of MgSO₄⋅ 7H₂O can be found as by calculating the masses of all the atoms in the formulae as follows;

mass of Mg = 24.305

mass of S = 32.065

mass of O = 16

so by putting all these in formula we can find the molar mass of  MgSO₄·7H₂O as

Molar mass =  24.305 + 32.065 + 16×4 + 7 (1.008×2 +16)

Molar mass = 24.305 + 32.065 + 64 + 7 (18.016)

Molar mass =  24.305 + 32.065 +  64 + 126.112

Molar mass =  246.482 g /mol

To look more about molar mass click here

brainly.com/question/12127540

#SPJ4

The statement is true because the reagents chlorine and FeCl3 are required for the chlorination of benzene via electrophilic aromatic substitution.

The chlorine atom acts as the electrophile and attacks the benzene ring, while the FeCl3 acts as a catalyst to facilitate the reaction. The chlorine atom then displaces one of the hydrogen atoms on the benzene ring, forming a chlorobenzene product.

This intermediate then undergoes rearrangement to form a new pi bond, resulting in the substitution of a chlorine atom for the hydrogen atom. This reaction is an important industrial process and is used to produce a variety of useful compounds, including herbicides, solvents, and plasticizers.

Learn more about fecl3

https://brainly.com/question/28821330

#SPJ4

Streak is the physical property of powdered mineral which represent its color.

A substance's physical property involves a quality that can be seen or quantified without affecting the substance's identity. Colour, density, toughness, & boiling and melting points are examples of physical qualities. The capacity of a material to go through a particular chemical transition is described by its chemical property.

We need to grasp the physical and chemical features or properties of the many materials in our environment in order to comprehend and utilize them. These characteristics assist us in both identifying and describing materials.

To know more about physical property visit :

https://brainly.com/question/21334123

#SPJ4

The university chemical hygiene plan (CHP) describes the policies, procedures, equipment and work practices that promote : safe handling, and use of chemicals in a laboratory setting.

The University Chemical Hygiene Plan (CHP) is a comprehensive document that outlines the policies, procedures, equipment, and work practices for promoting safe handling and use of chemicals in a laboratory setting. The CHP serves as a reference for employees, students, and researchers in the university to ensure that they understand the hazards associated with chemicals, the proper procedures for handling and storing them, and the measures in place to minimize risks and protect workers. The CHP may include guidelines for personal protective equipment, training and awareness programs, emergency response procedures, waste management practices, and equipment maintenance. It also defines the responsibilities of personnel in handling and using chemicals and the reporting procedures in case of accidents or incidents. The CHP is an important component of laboratory safety, and it is designed to reduce the risk of chemical exposure and injury. By following the guidelines outlined in the CHP, personnel can minimize the risk of exposure to hazardous chemicals and maintain a safe work environment.

To know more about chemical please refer: https://brainly.com/question/29447577

#SPJ4

Akshay's plasma osmolarity after the infusion mixed with his plasma, but before any water entered his rbc is 6 osmol/L.

Osmolarity is a measure of concentration that reflects the solutions' osmoticity. Osmolarity is how osmolar concentration is expressed.

The osmolarity of Akshay's plasma after the infusion can be calculated using the following formula:

Osmolarity = 2 x [solute concentration]

where solute concentration is the concentration of the solutes in the plasma.

Assuming the IV contained isotonic saline with a concentration of 0.9%, then the solute concentration of Akshay's plasma would be 0.9/1000 * 3L = 0.0027.

Therefore, the osmolarity of Akshay's plasma after the infusion would be 2 x 0.0027 = 0.0054 osmol/L.

Akshay's plasma osmolarity after the infusion mixed with his plasma, but before any water entered his RBC = (3 L x 2 Osmol/L) = 6 osmol/L.

learn more about solute Refer:brainly.com/question/24058779

#SPJ4

It is advised that your friend take 172-425 grams of carbs, dependant on his size of 86 kg, two hours before to his soccer match. The ideal choice is D.

As a result of the vitamins, nutrients, and dietary fiber they provide, full grain, berries, and vegetables are regarded as healthy carbohydrates. Contrarily, processed or refined carbohydrates like white spaghetti, sweetened beverages, and desserts have little to no nutritious benefit and therefore to be avoided altogether.

Carbohydrates carry out a variety of essential functions in your body. They are the main source of fuel for your brain's calorific values and give you energy for daily chores.

To know more about Carbohydrates visit :

https://brainly.com/question/29775112

#SPJ4

Four oxygen atoms are in 4.5x1023 units of kmno4. Potassium permanganate (KMnO4) is composed of one potassium atom, one manganese atom, and four oxygen atoms.

For blistering or pus-oozing sores on the surface of your skin, potassium permanganate is applied wetly. both impetigo and athlete's foot. Athlete's foot and impetigo are examples of bacterial and fungal skin illnesses that can be treated with potassium permanganate.

Breathing in potassium permanganate can have negative effects on you. Contact can cause serious skin and eye burns, with a potential eye injury. Potassium permanganate can cause throat and nose irritation when breathed in. Potassium permanganate can irritate the lungs, which can lead to coughing and/or shortness of breath when breathed in.

To know more about potassium visit;

https://brainly.com/question/14571753

#SPJ4

The alcohol functional group is polar and makes compounds more soluble in water.

According to the polarity of the systems, the simple rule "like dissolves like" applies: polar molecules tend to disperse in polar solvents (such as water and alcohols), while non-polar molecules tend to dissolve in non-polar solvents (e.g. hydrocarbon hexane).

Alkyl halides, ethers, amines, thiols, and alcohols. Because the bonding atoms' electronegativities differ more, these functional groups are noticeably more polar.

Methanol is hence a polar solvent and polar solute that is miscible (soluble in water). For dissolving molecules with alcohol, amino, and acidic functional groups, it is the most polar organic solvent.

To know more about compounds visit;

https://brainly.com/question/14898997

#SPJ4

From the given variable values, we can calculate the density of the rock sample to be = 2047Kg/m^3

To solve this question, we recollect that density is the mass per unit volume of a substance and the SI unit of density is Kg/m^3 with symbol

The given variables are as follows

mass of rock sample = 4.3g

The volume displaced in the graduated cylinder is

(Final volume level of the cylinder) - (initial volume level of the cylinder)

12.4ml - 10.3 ml= 2.1ml = volume of the rock sample

Therefore, density = 4.3/2.1 = 2.047g/ml = or 1000×2.047 Kg/m^3 =2047Kg/m^3

Density of the rock sample is 2047Kg/m^3

Learn more about Density:

brainly.com/question/1354972

#SPJ4

The solution is made by dissolving 4.857 g of  new polymer in enough water to make 159 ml of solution at 25 °C, the osmotic pressure of the solution is 0.995 atm. The molar mass of the polymer in g/mol is 763.6 g/mol.

The mass of the polymer = 4.857 g

Volume = 159 mL

The osmotic pressure =  0.995 atm

Temperature = 25 °C = 298 K

The expression for the osmotic pressure is as follows :

π = M R T

Where

π = osmotic pressure

M = molarity

R = constant

T = temperature

M = π / R T

M = 0.995 / ( 0.082 × 298 )

M = 0.0407 M

The number of moles = molarity × volume

                                     = 0.0407 × 0.159

                                      = 0.00636 mol

The molas mass = mass / moles

                           = 4.875 / 0.00636

                            = 763.6 g /mol

To learn more about molar mass here

https://brainly.com/question/14643104

#SPJ4

water and salt is the product of this reacti

If you dissolve 0.3 moles of hydrogen bromide (HBr) in 1 liter of water,  Ionization will happen which the HBr will dissociate into its ions, hydrogen (H+) and bromide (Br-). HBr (aq) ⇒ H (+) + Br (-).

Hydrogen bromide in the solution dissociate into in's constituent ions and this is an exothermic reaction. An exothermic reaction involves releasing of heat while progressing the reaction.

The heat that released from this exothermic reaction helps to increase the solubility of HBr in water.

The concentration of H+ ions will determine the pH of the solution. If the pH is 7 then it is neutral, if the pH is above 7 then it is alkaline and below 7 it is acidic.

Learn more about Ionization:

https://brainly.com/question/28385102

#SPJ4