When three phosphate groups are covalently attached to adenosine, ATP is formed.
What are three phosphate groups and adenosine?At the cellular level, energy is utilized and retained as adenosine triphosphate (ATP). Adenine, ribose, and three serially connected phosphate groups compose up the structure of ATP, which is an nucleoside triphosphate. Adenine molecules are formed to ribofuranose molecules via a beta-N(9)-glycosidic interaction to synthesize the ribonucleoside adenosine.
What part does adenosine play?It performs as an analgesic, a vasodilator, an anti-arrhythmia prescription, a human metabolite, and a fundamental metabolite. It is part of the family of adenosines and is a purines D-ribonucleoside. Adenosine improves a person's desire seeking sleep or sleep drive. Thus according research, adenosine also influences the immune system and can diminish inflammatory processes.
Learn more about phosphate groups here:
brainly.com/question/14604434
#SPJ4
given 9.26 moles of NaN3, how man moles of N2 are produced?Please look at screenshot.
Based on the mole ratio of the reaction, the moles of N₂ that are produced is 13.89 moles of N₂.
What is the number of moles of N₂ that can be produced from 9.26 moles of NaN₃?The number of moles of N₂ that can be produced from 9.26 moles of NaN₃ is determined from the equation of the reaction.
The equation of the reaction is given below:
2 NaN₃ ----> 2 Na + 3 N₂
The mole ratio of NaN₃ to N₂ is 2 : 3
The moles of N₂that are produced = 9.26 * 3/2
The moles of N₂ that are produced = 13.89 moles.
Learn more about mole ratio at: https://brainly.com/question/26023
#SPJ1
Which of the following compounds has the largest lattice energy?a. CsIb. CsFc. LiFd. LiIe. MgO
The correct option is E. MgO of the following compounds has the largest lattice energy.
Lattice energy can be defined as the electricity required to convert one mole of an ionic strong into gaseous ionic constituents. as a substitute, it is able to be described as the power that need to be furnished to one mole of an ionic crystal so that it will separate it into gaseous ions in a vacuum thru an endothermic procedure.
In chemistry, the lattice strength is the power change upon formation of 1 mole of a crystalline ionic compound from its constituent ions, which are assumed to to start with be inside the gaseous kingdom. it's miles a measure of the cohesive forces that bind ionic solids. "it is also referred as lattice enthalpy.
To learn more about Lattice energy visit here:
brainly.com/question/18222315
#SPJ4
From the following list of aqueous solutions and water, select the one with the highest boiling point.
A) 1.0 m KNO3
B) 0.75 m NaCl
C) 0.75 m CuCl2
D) 2.0 m C12H22O11 (sucrose)
E) pure water
CuCl2 has the greatest boiling point, according to the question given.
Why does water boil?Boiling point: The temperature at which a liquid's internal pressure equals the external pressure exerted by a liquid's vapour; at this temperature, the addition of heat causes the liquid to turn in its vapour without rising the temperature.
We know that elevation in boiling point = i x Kb x m
therefore,
dTb = i x Kb x m
We are known that water will boil at 100 C.
So,
Tb -100 = i x Kb x m
Tb = 100 + ( I x Kb x m)
now Kb is a constant
Therefore,
Tb is depend on the outcome of I x m.
So,
A) 1 m KN03
KN03 ----> K+ + N03-
two species in the product after dissociation , so i =2
i x m = 2 x 1 = 2
B) 0.75 NaCl
NaCl ---> Na+ + Cl-
i =2
So,
i x m = 2 x 0.75 = 1.5
C) 0.75 m CuCl2
CuCl2 ----> Cu+2 + 2Cl-
i=3
So,
I x m
= 3 x 0.75
= 2.25
D) 2 m sucrose
sucrose is non electrolyte so i=1
i x m = 2 x 1 = 2
E) for pure water
Tb = 100 C
So,
CuCl2 has the highest I x m product.
Hence,
CuCl2 has the highest boiling point
To know more about boiling point visit :
https://brainly.com/question/16945842
#SPJ4
determine the number of atoms of each element in the empirical formula of a compound with the following composition: 65.08 percent c, 10.14 percent h, 24.77 percent o.
The number of atoms of each element in the empirical formula of a compound is C7H13O2.
Empirical formula mass = 129 g/mol
Carbon atom =7
Hydrogen atom =13
Oxygen atom=2
The empirical formula is a representation of the simplest whole number ratio of atoms in a compound. It is derived from the results of chemical analysis and gives the smallest whole number ratio of elements in a compound. The empirical formula is not always equal to the molecular formula, which gives the actual number of atoms of each element in a molecule.
To find the empirical formula, the number of moles of each element in a sample must be determined. The moles of each element can be divided by the smallest number of moles to obtain the ratio of elements. This ratio is the empirical formula. The empirical formula can be used to identify unknown compounds, predict properties and reactivity, and provide information about the molecular structure.
To learn more about Empirical formulavisit here:
brainly.com/question/14044066
#SPJ4
If I started with 283 g of HgO and added heat until it was fully decomposed. I was left with 213 g of liquid Hg. How many grams of oxygen gas were bubbled out?
The mass (in grams) of oxygen gas that were bubbled out, given that 283 grams of HgO decomposed is 20.9 g
How do I determine the mass of O₂ that bubble out?We'll begin by writing the balance equation for the reaction. This is given below:
2HgO -> 2Hg + O₂
Molar mass of HgO = 200.59 + 16 = 216.59 g/molMass of HgO from the balanced equation = 2 × 216.59 = 433.18 g Molar mass of O₂ = 2 × 16 = 32 g/molMass of O₂ from the balanced equation = 1 × 32 = 32 gFrom the balanced equation above,
433.18 g of HgO decomposed to produce 32 g O₂
Now, we shall determine the mass of O₂ that will bubble out when 283 g of HgO decompose. Details below:
From the balanced equation above,
433.18 g of HgO decomposed to produce 32 g O₂
Therefore,
283 g of HgO will decompose to produce = (283 × 32) / 433.18 = 20.9 g of O₂
Thus, the mass of CO₂ that bubbled out is is 20.9 g
Learn more about mass produced:
https://brainly.com/question/9526265
#SPJ1
The reaction of 2,2-dimethyl-1-propanol with HBr is very slow and gives 2-bromo-2-methylbutane as the major product. Give a mechanistic explanation for these observations.
A carbocation rearrangement with a methyl shift is the outcome of the process.
Methyl shift is the transfer of a methyl group from one charged carbon atom in a molecule to a nearby, uncharged carbon atom. If the changing chemical species is a methyl group, we refer to this as a methyl shift, albeit it might also be any other potential alkyl group.
These are the steps of reaction of 2,2-dimethyl-1-propanol with HBr
1) 2,2-dimethyl-1-propanol is protonated in the first step.
2) The removal of [tex]H_{2} O[/tex] results in the formation of a carbo cationic intermediate in the second step.
3) the methyl group is shifted to produce a more stable carbo cationic intermediate.
4) Br-Br-attacks the stable carbocation to produce 2-bromo-2-methylbutane.
To know more about carbocation:-
brainly.com/question/11486868
#SPJ4
Write a balanced equation and K₁, expression for the following Brønsted-Lowry base in water:
acetylide ion, HC=C. Include the states of all reactants and products in your equation.
Answer: Hope this helps:
The balanced equation for the reaction of the acetylide ion (HC=C) with water (H2O) as a Brønsted-Lowry base is:
HC=C + H2O → HC(OH)=C
The equilibrium constant (K₁) expression for this reaction can be expressed as follows:
K₁ = [HC(OH)=C] / [HC=C][H2O]
where [ ] represents the concentration of the species in moles per liter (M).
An atom is composed of a very dense central ______ containing _______, which are positively charged, and neutrons, which have _______ electric charge.
Protons, which are positively charged, and neutrons, which have no electric charge, make up the very dense core nucleus of an atom.
"An atomic nucleus contains protons, which have positive charges," In reality, the protons and neutrons that make up an atomic nucleus are called nucleons. The charge of an atomic nucleus is mostly determined by the positive charge of the protons because neutrons are neutral or have no charge.
The smallest, indivisible unit that makes up the substance that gives rise to all chemical elements is referred to as an atom. As a result, atoms are frequently thought of as the basic units of matter, the structure of which defines the nature of a chemical element.
For such more question on Protons.
https://brainly.com/question/1805828
#SPJ4
Calculate the molar mass of a vapor that has a density of 7.125 g/L at 13 °C and 743 torr.
Express the molar mass in grams per mole to three significant digits.
Answer:
Explanation:
Let’s start by converting the given information to the terms necessary: 290* K, .978 atm, 7.125 g/L
To solve this problem, we’re going to use the formula PM=dRT (R always = .0821)
so, (.978)M=(7.125)(.0821)(290)
Divide both sides by .978
M = 173 g/mol (keeping with 3 sig figs)
Atmospheric pressure decreases as altitude increases. In other words, there is more air pushing down on you at sea level, and there is less air pressure pushing down on you when you are on a mountain.
If pentane (C5H12), hexane (C6H14), and hexanol (C6H13OH) are heated evenly at different altitudes, rank them according to the order in which you would expect them to begin boiling.
Rank from first to last. To rank items as equivalent, overlap them.
Pentane can simmer at quite a lower temperature then hexane because of the size difference between the two alkanes at sea level. In high altitude, hydrogen bonds cause phenol to have a higher boiling point.
What impact does distance have on hydrogen bonds?The typical value for hydrogen bonding between proteins and water is 3.0, with this distance often ranging between 2.7 and 3.3. Measuring the strength of a hydrogen bond also requires consideration of the angle that the bond forms. The strength of the hydrogen bond increases with hydrogen bond shape.
How far apart are hydrogen bonds formed?The average separation between the donor and the acceptor atoms in hydrogen bonding is between 2.7 and 3.3 Angstroms. Carbon-carbon separations are typically 3.3–4.0 Angstroms longer for hydrophilic groups (van der Waals bonds).
To know more about hydrogen bonds visit:
https://brainly.com/question/1426421
#SPJ4
predict whether a reaction occurs, and if so, write on a separate piece of paper the balanced total and net ionic equations (in the field provided you only need to input the sum of the coefficients of the net ionic equation, so enter a whole number, e.g. 0, 1, 2, 3, etc): sodium hydroxide (aq) cadmium(ii) nitrate (aq)
Chemical equations known as ionic equations only display the ions that are active during a process. Alternatively put, the ions that combine in solution to react and create new compounds.
In chemistry, what is the net ionic equation?The chemical equation known as the net ionic equation only displays the atoms, molecules, and ions that are actually contributing to the process.
In ionic form, how would you express an equation?Breaking down all soluble ionic chemicals (those denoted with a (aq)) into their corresponding ions will allow you to write the ionic equation. Every ion needs to be represented with its charge and a (aq) to indicate that it is present in solution. Show the quantity of each ion present using coefficients.
To know more about ionic equations visit :-
https://brainly.com/question/15466794
#SPJ4
If your front lawn is 21.0*20.0 lawn each square foot accumulate 1150 snowflakes how much snow per snow in kg accumulates the lawn per hour. Assume the snowflake mass is 1.90
assume you have a proton in an atom, and that proton is surrounded by an electron shell where the charge is evenly distributed across the entire surface of the shell. the proton would feel
A proton in an atom, and that proton is surrounded by an electron shell where the charge is evenly distributed across the entire surface of the shell. the proton would feel protons will feel a huge force of attraction
Atom is the smallest unit of matter that can stand alone or be combined. Inside the atomic nucleus are neurons and protons, and in the shells are sometimes found electrons that are negatively charged which are separated in their respective trajectories or orbits.
Protons are particles that make up atoms that are deep inside the atomic nucleus so that they cannot be disturbed by particles outside the qatom. Therefore the proton is a stable subparticle of the atom. The electrons in the atomic shells orbit the atomic nucleus and form chemical reactions through the coulomb force between electrons and protons so that electrons are bound to atoms.
Learn more electrons at:
https://brainly.com/question/17066934
#SPJ4
Identify all possible types of intermolecular forces that can form between particles of each substance below. (Select all that apply.)
(a) CS2
dipole-dipole interactions
hydrogen bonding interactions
ion-dipole interactions
London dispersion forces
(b) CHCl3
dipole-dipole interactions
hydrogen bonding interactions
ion-dipole interactions
London dispersion forces
(c) Kr
dipole-dipole interactions
hydrogen bonding interactions
ion-dipole interactions
London dispersion forces
(d) HF
dipole-dipole interactions
hydrogen bonding interactions
ion-dipole interactions
London dispersion forces
(e) H2Te
dipole-dipole interactions
hydrogen bonding interactions
ion-dipole interactions
London dispersion forces
CS2 and H2Te have a London dispersion force whereas Chcl3, Kr, and HF have dipole-dipole interaction
H2Te possesses non-polar bonds. As a result, you should disregard it as a dipole and solely take into account van der Waals and London dispersion forces. The C-S bond is nonpolar because of the disparity in electronegativities between C and S. Due to the direction of two bond dipoles in the linear structure of carbon disulfide, the dipole moments are canceled out. Carbon disulfide is hence non-polar.
Any neighboring pair of atoms or molecules will interact when they are present in sufficiently close proximity due to London dispersion forces.
These forces become stronger with increasing polarity for molecules with identical size and mass. Additionally, nonpolar molecules can develop dipoles as a result of polar molecules, producing dipole-dipole interaction
To learn more about the London dispersion force please visit - https://brainly.com/question/20514601
#SPJ4
calculate a value for the equilibrium constant for the reaction below. (hint: when reactions are added together, the equilibrium expressions are multiplied.)
A Paramecium (unicellular organism) is less complex than a human (multicellular organism) because the Paramecium has Mark only one oval. 0000 one cell instead of many cells. the human has organs. the parameciun does not organ systems. All of the above.
A paramecium (unicellular organism) is less complex than a human (multicellular organism) because it is has all of the above which is a member of kingdom protista.
What is kingdom protista?
Organisms of kingdom Protista are simple eukaryotic organisms which are neither plants nor animals or fungi.These are unicellular organisms but can also exist in the form of colonies.
They live in water or damp terrestrial zones.Some of the organisms of kingdom Protista have cilia or flagella which helps the organism in locomotion.They are autotrophic or heterotrophic in nature.
Learn more about kingdom protista,here:
https://brainly.com/question/15377222
#SPJ1
consider the reaction between solid caco3 and aqueous hcl. the reaction will be speeded up by an increase in which of the following conditions?
The reaction will speeded up by an increase in the frequency or energy of collisions between reactant molecules can lead to an increase in reaction rate.
The reaction between solid calcium carbonate (CaCO3) and aqueous hydrochloric acid (HCl) can be speeded up by an increase in temperature. This reaction is an exothermic reaction, meaning it releases heat. As the temperature increases, the reaction rate also increases, as the kinetic energy of the reactant molecules increases, making it easier for them to collide and react with one another. This results in an increase in the number of successful collisions per unit time, leading to a faster reaction rate. An increase in the concentration of hydrochloric acid will also speed up the reaction. This is because an increase in the concentration of HCl increases the number of H+ ions in solution, leading to more frequent collisions between H+ ions and CaCO3, resulting in a faster reaction rate.
In general, any factor that increases the frequency or energy of collisions between reactant molecules can lead to an increase in reaction rate.
To know more about reaction please refer: https://brainly.com/question/4482869
#SPJ4
A method of analysis yields masses of gold that are low by 0.4 mg. Calculate the percent relative error caused by this result if the mass of gold in the sample is
(a) 500 mg
(b) 250 mg
(c) 150 mg
(d) 70 mg
Please explain the steps
Answer:
The percent relative error caused by a method of analysis that yields masses of gold that are low by 0.4 mg can be calculated as follows:
(a) For a sample with a mass of 500 mg of gold, the percent relative error is 0.08% (0.4/500 * 100).
(b) For a sample with a mass of 250 mg of gold, the percent relative error is 0.16% (0.4/250 * 100).
(c) For a sample with a mass of 150 mg of gold, the percent relative error is 0.27% (0.4/150 * 100).
(d) For a sample with a mass of 70 mg of gold, the percent relative error is 0.57% (0.4/70 * 100).
In each scenario, the percent relative inaccuracy grows as the actual mass of gold diminishes. This is due to the fact that when the real value falls, the same absolute inaccuracy (0.4 mg) becomes a higher proportion of the genuine value.
What is error analysis?In chemistry, an error is defined as the difference between the real (or accepted true) result and the measured result. If the analytical mistake is substantial, severe repercussions may occur. Analytical chemistry is built on dependability, repeatability, and precision.
Here,
To calculate the percent relative error, we use the following formula:
Percent Relative Error = (|observed value - true value| / true value) * 100%
where observed value is the measured value, and true value is the actual value. In this case, the observed value is the mass of gold that is low by 0.4 mg, and the true value is the actual mass of gold.
(a) If the mass of gold in the sample is 500 mg, the observed value is 500 - 0.4 = 499.6 mg, and the percent relative error is:
Percent Relative Error = (|499.6 - 500| / 500) * 100% = (0.4 / 500) * 100% = 0.08%
(b) If the mass of gold in the sample is 250 mg, the observed value is 250 - 0.4 = 249.6 mg, and the percent relative error is:
Percent Relative Error = (|249.6 - 250| / 250) * 100% = (0.4 / 250) * 100% = 0.16%
(c) If the mass of gold in the sample is 150 mg, the observed value is 150 - 0.4 = 149.6 mg, and the percent relative error is:
Percent Relative Error = (|149.6 - 150| / 150) * 100% = (0.4 / 150) * 100% = 0.2667%
(d) If the mass of gold in the sample is 70 mg, the observed value is 70 - 0.4 = 69.6 mg, and the percent relative error is:
Percent Relative Error = (|69.6 - 70| / 70) * 100% = (0.4 / 70) * 100% = 0.5714%
In each case, we can see that as the actual mass of gold decreases, the percent relative error increases. This is because the same absolute error (0.4 mg) becomes a larger fraction of the true value as the true value decreases.
To know more about error analysis,
https://brainly.com/question/13078117
#SPJ1
1 2 3 4 5 6 7 8 9 10 Nuclear energy can be used to power _______. a. street lights b. businesses c. homes d. all of the above Please select the best answer from the choices provided A B C D
Answer:
all of the aboveeee
a student is trying to determine the heat of reaction for the acid-base neutralization reaction represented above. the student uses 0.50 m naoh and 0.50 m hcl solutions. which of the following situations, by itself, would most likely result in the least error in the calculated value of the heat of reaction?
Explanation:
Using a calorimeter with the highest possible accuracy to measure the heat of reaction.
fire: which of the following chemicals are considered to pose fire hazards in normal use? more than one answer may be correct. diethyl ether dichloromethane ethyl acetate ethanol acetone
The following chemicals are considered to pose fire hazards in normal use: diethyl ether, ethanol, acetone, and ethyl acetate.
Fire hаzаrds аre situаtions thаt could cаuse the ignition of combustible mаteriаl if left unchecked or uncontrolled. Fire hаzаrds аnd fire types will vаry from worksite to worksite, depending on the type of work being performed аnd the types of mаteriаl on locаtion.
What are the 4 types of fire hazards?Clаss А: solid mаteriаls such аs wood or pаper, fаbric, аnd some plаstics. Clаss B: liquids or gаs such аs аlcohol, ether, gаsoline, or greаse. Clаss C: electricаl fаilure from аppliаnces, electronic equipment, аnd wiring. Clаss D: metаllic substаnces such аs sodium, titаnium, zirconium, or mаgnesiumFrom the options, dichloromethаne is а combustible liquid with а sweet odour. It reаcts violently with metаls such аs аluminium powder, mаgnesium powder, strong bаses аnd strong oxidаnts, cаusing а fire аnd explosion hаzаrd. That's why dichloromethane can't suggest for daily use.
Your options aren't well arranged, but most probably your options were
A. diethyl ether
B. dichloromethane
C. ethyl acetate
D. ethanol
E. acetone
Thus, the correct options are A, C, D, and E.
For more information about fire hazards refer to the link:
https://brainly.com/question/28379186
#SPJ4
upon heating 1123g MgSO4.7 H2O
how many grams of water can be obtained?
how many grams of anhydrous compound van be obtained?
A 0.500 g impure sample of LiNO3 is heated, causing it to decompose according to the following equation: 4LINO3(s) — Li,O(s) + 4NO2(g) + O2(g) The gases produced are collected over water at 27°C and 1.00 atm external pressure, and occupy a volume of 55.2 mL. Calculate the partial pressure of O, in the mixture? What is the percentage of LINO3 in the sample? The partial pressure of water is 26.7 mm Hg at 27°C.
The partial pressure of O2 and the percentage of LiNO3 in an impure sample after undergoing a decomposition reaction can be determined through the following steps:
Find the number of moles of gas produced: The volume of the gas mixture and its temperature are used to find the number of moles of gas using the ideal gas law.
Determine the partial pressure of O2: The number of moles of O2 produced is used in the ideal gas law to find its partial pressure.
Find the total pressure: The partial pressures of O2, NO2, and water are added to find the total pressure of the gas mixture.
Determine the percentage of LiNO3: The mass of LiNO3 in the original sample is calculated based on the number of moles of gas produced and its molar mass, and then divided by the total mass of the original sample to find the percentage of LiNO3.
The final answer is the partial pressure of O2 is 0.452 atm and the percentage of LiNO3 in the original sample is 43.5%.
To learn more about partial pressure please click on below link
https://brainly.com/question/15075781
#SPJ4
true/false. taq polymerase was isolated from a thermophile and is used in the polymerase chain reaction (pcr) technique because it does not become inactivated at high temperatures.
It is true that polymerase, which is employed in the polymerase chain reaction (pcr) method, was extracted from a thermophile.
Is it more likely that low temperatures than high ones may cause irreparable harm to bacterial cells?Because irreversible cell damage is more likely to happen at low temperatures than high ones, food is often refrigerated to minimize microbial development. Generally speaking, the ideal temperature is nearer to the minimum than the maximum.
Which statement demonstrates the modifications that hyperthermophilic proteins need to make in order to be active at temperatures higher than 80 °C?In order to stabilize the proteins, hyperthermophiles have more ionic bonds.
To know more about polymerase chain visit :-
https://brainly.com/question/11417541
#SPJ4
How many moles of particles per liter in 0.591 M LiF?
Answer:
Below
Explanation:
Each liter contains .591 moles
each mole is 6.02 x 10^23 particles
.591 x 6.02 x 10^23 = 3.56 x 10^23 particles
determine the molarity of each ions present in a solution of 0.45M Ag3PO4 (assume 100% ionization)
Since Ag3PO4 is a salt, it dissociates into ions when dissolved in water. Assuming 100% ionization, the equation for the dissociation of Ag3PO4 in water is as follows:
Ag3PO4 (s) → 3 Ag+ (aq) + [tex]PO4^{3-}[/tex] (aq)
From the given molarity of Ag3PO4, we can calculate the molarity of each ion in the solution:
Molarity of Ag+ = (3 moles of Ag+)/(1 mole of Ag3PO4) × 0.45 M = 1.35 M
Molarity of [tex]PO4^{3-}[/tex] = (1 mole of[tex]PO4^{3-}[/tex])/(1 mole of Ag3PO4) × 0.45 M = 0.45 M
So, the molarity of Ag+ ions in the solution is 1.35 M and the molarity of [tex]PO4^{3-}[/tex] ions in the solution is 0.45 M.
What is Molarity?The number of moles of solute present in a specific volume of solvent is measured by the concentration unit known as molarity. The symbol "M" stands for moles of solute per liter of solution, which is how it is stated. The term "molarity" is frequently used in chemistry to describe the concentration of a solution and plays a crucial role in figuring out how much of one reactant is required for a reaction to take place.
A chemical species' concentration in a solution, specifically the amount of a solute per unit volume of solution, is measured by its molar concentration. The number of moles per liter, denoted by the unit sign mol/L, is the most often used molarity unit in chemistry.
To know more about Molarity, check out:
https://brainly.com/question/27220536
#SPJ1
which of the following is the balanced net ionic equation for an oxidation-reduction reaction between ag (aq) and ni(s) based on the half-reactions represented above?
Ni2+ = 2Ag(s)+(aq)+Ni(s) (aq) Based on the half-reactions, the balanced net ionic equation for an oxidation-reduction reaction between ag (aq) and ni(s) is 2Ag+(aq)+Ni(s) 2Ag(s)+Ni2+(aq).
What is produced by the reaction between solid copper and aqueous silver nitrate?The balanced equation below represents the reaction between solid copper and aqueous silver nitrate, which results in solid silver and blue solution: 2AgNO Cu(s) (aq) Cu(NO )(aq) (aq) 2Ag(s) based on the equation's balance.
What happens when potassium and strontium chloride are combined in water?A precipitate of strontium sulfate is created when aqueous strontium chloride (SrCl2) and aqueous potassium sulfate (K2SO4) react (SrSO4).
To know more about half-reactions visit:-
https://brainly.com/question/10668307
#SPJ4
The various types of electromagnetic radiation are distinguished from each other by their....
Answer:
The various types of electromagnetic radiation are distinguished from each other by their frequency or wavelength. The frequency of electromagnetic radiation is the number of oscillations of the electromagnetic wave per second, while the wavelength is the distance between two consecutive peaks of the wave. Electromagnetic radiation can have a wide range of frequencies and wavelengths, from radio waves with long wavelengths and low frequencies to gamma rays with short wavelengths and high frequencies. The different types of electromagnetic radiation include radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays.
The Calculation to find the milligrams of ferrous ion, Fe^2+, in 325 mg (0.325 g) of anhydrous ferrous sulfate, FeSO_4, is 0.325 g FeSO_4 x 55.85 g Fe^2+/151.85 g FeSO_4
= 0.120 g Fe^2+
or 120. mg Fe^2+ 325 mg of which hydrate of iron (II) sulfate below contains 65 mg Fe^2+? This conforms to the label on the tablet box: 65 mg of Fe^2+ for every 325 mg "iron (II) sulfate"
A. FeSO_4*4H2O
B. FeSO_4*5H2O
C. FeSO_4*7H2O
D. FeSO_4*9H2O
The correct answer is C. [tex]FeSO_4*7H_2O[/tex], as it contains 65 mg of [tex]Fe^{2+}[/tex] for every 325 mg "iron (II) sulfate", which conforms to the label on the tablet box.
The number of water molecules in the hydrate affects the molar mass of the compound, and therefore, the number of moles of ferrous ion [tex]Fe^{2+}[/tex] in a given mass of the hydrate. So, by finding the molar mass of each hydrate, and then comparing the number of moles of [tex]Fe^{2+}[/tex] in each one, we can determine which hydrate contains 65 mg [tex]Fe^{2+}[/tex]. The anhydrous form of ferrous sulfate, [tex]FeSO_4[/tex] , contains only one molecule of [tex]Fe^{2+}[/tex] per formula unit. However, when it forms hydrates, it can contain multiple water molecules in addition to the [tex]FeSO_4[/tex] molecule. The number of water molecules in the hydrate affects the molar mass of the compound and therefore the number of moles of [tex]Fe^{2+}[/tex] in a given mass of the hydrate.
Learn more about ferrous ion here:
brainly.com/question/14567402
#SPJ4
I
Particle size:
250 mL
200
150
100
50
Using a graduated cylinder, fill a 250 mL beaker with 200 mL of water.
Reaction time:
seconds DONE
The volume of the object is obtained by the change in the volume of the liquid.
What is the displacement method of determining volume?The displacement method of determining volume involves measuring the change in fluid volume when an object is submerged in it. This method works by determining the volume of fluid that is displaced by the object, which is equal to the volume of the object itself. This method is often used to determine the volume of irregularly shaped objects.
Note that the use of the method of the displacement of the solid can only be used when we are dealing with a solid that is an irregular solid.
Learn more about volume:https://brainly.com/question/1578538
#SPJ1