fill in the blank. ___ are typically polar extend outward from the helix spiral are located in an alternating arrangement between the inside and the outside of the helix provide the hydrogen bonds that form the helix are buried in the interior of the helix

The reaction equation for the balance of gases at equilibrium is given by the law of mass action just only like this:

CO(g) + H2O(g) ⇌ CO2(g) + H2(g)

And need specific conditions to make molecules to react and make equilibrium.

Equilibrium is a state where the rate of the forward reaction is equal to the rate of the reverse reaction. The number of molecules of each species at equilibrium depends on the reaction conditions such as temperature, pressure and the initial concentrations of reactants and products.

The reaction equation for the balance of gases at equilibrium is given by the law of mass action:

CO(g) + H2O(g) ⇌ CO2(g) + H2(g)

To determine the number of molecules at equilibrium, we need to use the equilibrium constant expression (Kc) for the reaction, which is defined as the ratio of the concentration of products raised to their stoichiometric coefficients, to the concentration of reactants raised to their stoichiometric coefficients.

Since the problem does not provide any specific conditions, it is not possible to determine the number of molecules of each species present at equilibrium through trial and error.

Learn more about Determining Equilibrium Concentrations here:

https://brainly.com/question/16203171

#SPJ4

Home oral irrigation can be a good substitute for flossing every day. Both claims are accurate. Therefore, all the options are incorrect.

What is an irrigation?

Irrigation, often known as watering, is the process of providing precise amounts of water to a specific area of land to aid in the growth of lawns, landscaping plants, and agricultural crops. For more than 5,000 years, irrigation has been a crucial component of agriculture and has been created by several cultures all over the world. In arid locations and during periods of below-average rainfall, irrigation aids in the growth of crops, the upkeep of landscapes, and the revegetation of damaged soils. Aside from these purposes, irrigation is also used to avoid soil compaction, inhibit weed growth in grain fields, and protect crops from frost.

To learn more about irrigation visit;

https://brainly.com/question/1398884

#SPJ4

It is given that, the rate constant of the decomposition of SO₂Cl₂ is 1.45 ×10⁻⁴ s⁻¹. Then the rate of the reaction is 1.45 ×10⁻⁴ M s⁻¹ for the initial concentration of 1 mole. Therefore, it will take 0.72 hours to decrease to 0.62 mol/L.

Rate of a reaction is the rate of decrease in the concentration of reactants or the rate of increase in the concentration of products. The expression for the rate law is:

rate  = k [A] for a single reactant reaction.

Where k is the rate constant.

Given the rate constant = 1.45 ×10⁻⁴ s⁻¹

concentration of SO₂Cl₂ = 1 M.

then rate of reaction =  1.45 ×10⁻⁴ M s⁻¹

Hence, for one second  1.45 ×10⁻⁴ M of the reactant  vanishes within each seconds. Hence, the disappeared concertation here is, 1 - 0.62 = 0.38 M.

The time taken to consume 0.38 M of the reactant is :

0.38 M × 1 s/ 1.45 ×10⁻⁴ M = 2620 seconds  or 0.7 hours.

Therefore, it will take 07 hours to decrease the concentration to 0.62 moles.

Find more on reaction rate :

https://brainly.com/question/497987

#SPJ1

Your question is incomplete. But the complete question probably was:

The decomposition of SO2Cl2 is first order in SO2Cl2 and has a rate constant of 1.46×10−4 s−1 at a certain temperature. If the initial concentration of SO2Cl2 is 1.00 M, how long will it take for the concentration to decrease to 0.62 M?

The conversion of the given units are as follows:

98.6oF = 37°C = 310 K = 98.33°F

25.0°C = 298K = 76.73°F

131.85°C = 405 K

Temperature is a physical quantity that quantifies our feelings of hotness and coldness. A thermometer is used to measure temperature.

According to the International System of Units, the SI unit of temperature is Kelvin, which is represented by the symbol K. In the fields of science and engineering, the Kelvin scale is widely accepted or used.

However, in most parts of the world, temperature is measured using the Celsius or Fahrenheit scale.

Thus, The conversion of the given units are 98.6oF = 37°C = 310 K = 98.33°F.

To learn more about the temperature, follow the link;

https://brainly.com/question/11464844

#SPJ1

You would need a bigger graph to be able to compute these values.

Get bigger graph paper as it says "The X-axis should be years and the Y-axis should be coal production." On the X-axis (Horizontal Line) write "Years" and on the Y-Axis (Vertical Line) write "Coal Production."

Now, you are gonna start listing all the years on the X-Axis 1996 through 2011, And on the Y-Axis list all the coal productions 145 and all the numbers through 634.

Make sure you have the regions, Appalachian, Interior and Western.

Read more about graphs here:

https://brainly.com/question/19040584

#SPJ1

Therefore, if the configuration of the reactant was (1R, 2R, 4R), the configuration of a substituted product(s) will be no R/S.

Product configuration is the method of choosing and organizing pieces of a product in a specific order to customize it to a customer's demands. A personalized product typically adds greater value than like a one-size-fits-all substitute since every customer had different objectives and limitations.

A reactant is what? The components of a chemical reaction are referred to as reactants. Atoms, the fundamental units of matter, reorganize themselves to produce new combinations in a process known as a chemical reaction. Raw materials can react each other are known as reactants.

To know more about reactant configuration visit:

brainly.com/question/29727979

#SPJ4

Making the ionic equation HC2H3O2aq + K+ + OH- C2H3O2 - aq + K+ + H2O, the proton from acetic acid should be transferred to the hydroxide ion. Simply removing the K+ spectator ions will convert this into a net ionic equation.

KOH results from their interaction (aq.) A salt is produced as a result of the interaction between potassium hydroxide and acetic acid. Potassium acetate + water = potassium hydroxide + acetic acid. Acid is CH3COOH, while base is KOH.

The neutralization reaction HNO3 + NaOH produces NaNO3 and H2O. (also a double displacement reaction). Strong base (HNO3) and acid (HNO3) react to form salt (NaNO3) and water (H2O).

To know more about ionic equation visit :-

https://brainly.com/question/15466794

#SPJ4

Half-life can be calculated using the formula [tex]t(\frac{1}{2}) = \frac{ln(2)}{k}[/tex], where k is the decay constant. Therefore, the half-life of carbon-14 is 5730 years.

The half-life of a radioactive isotope is defined as the amount of time it takes for half of the original amount of the isotope to decay. The half-life can be calculated using the decay constant, which represents the rate at which the isotope decays. In this case, the decay constant of carbon-14 is given as -1.2097 x 10-4 (per year). To find the half-life, we need to solve the equation

[tex]t(\frac{1}{2}) = \frac{ln(2)}{k}[/tex],

Where [tex]t(\frac{1}{2})[/tex] is the half-life and k is the decay constant. Plugging in the value of the decay constant, we get:

[tex]t(\frac{1}{2}) = \frac{ln(2)}{-1.2097 * 10^{-4} }[/tex] = 5715 years

So, the half-life of carbon-14 is approximately 5715 years.

Learn more about isotopes

brainly.com/question/11680817

#SPJ4

The frequency of the photons emitted by hydrogen atoms when they undergo transitions from n = 5 to n = 3 is 656.3 x 10⁹ Hz.

The hydrogen atom is an example of a simple atomic system where the electrons are in quantized energy levels. Photons are emitted or absorbed by the hydrogen atom when its electrons undergo transitions between these energy levels.

The frequency of the photons emitted or absorbed is determined by the difference in energy between the initial and final energy levels. The relationship between the frequency and the energy levels is given by the Rydberg equation, where the frequency is proportional to the inverse of the square of the energy level numbers:

f = R_H (1/n1² - 1/n2²)

where R_H is the Rydberg constant (R_H = 1.097 x 10⁷ m⁻¹) and n1 and n2 are the initial and final energy levels, respectively.

So, for the transition from n = 5 to n = 3, the frequency would be:

f = 1.097 x 10⁷ (1/5² - 1/3²)

f = 656.3 x 10⁹ Hz

which is approximately equal to 656.3 x 10⁹ Hz.

To learn more about Rydberg equation visit: https://brainly.com/question/17867710

#SPJ4

The mass of 0.80 moles of Mg are 19 gram.

The term molar mass (M) is defined as the mass of a chemical compound divided by its total amount of substance measured in moles.

It is defined as MB = m/nB, where m is the total mass of a sample of pure substance and nB is the amount of substance B in moles.

Given:  

0.80 moles of Mg = ?

Convert to "g" (units of "g" ; that is "grams" of "Mg" ).

The molar mass of "Mg"  is 24.305 g / mol    

0.80 mol  ×  (24.305 g Mg / 1 mol Mg)  = ?  g  Mg  ??

we have,  

(0.80 × 24.305) g of Mg

=  19.444 gram                    

Round this number to 2 (two) significant figures therefore, there are 2 (two) significant figure in our given amount of Mg " 0.80 mol" ;

= 19 gram

Thus, the mass of 0.80 moles of Mg are 19 gram.

To learn more about the molar mass, follow the link;

https://brainly.com/question/12127540

#SPJ1        

The cobalt with a half life of 5.3  years have the decay constant of 0.13 yrs⁻¹ . After 10.46  years 25.7 % of cobalt -60 will be there.

Heavy unstable radioactive isotopes undergo nuclear decay by the emission of charged particles. Nuclear decay is a first order reaction.

Thus, the decay constant k  = 1/t ln W0/Wt

where t is the time of decay, W0 be the initial amount and Wt be the amount after time t.

The half life of the element =  5.3 years

k = 0.693/5.3yrs =  0.13 yrs⁻¹.

The time of decay is given 10.6 years.

Then,

t = 1/k  ln Wo/(Wt )

10.6 = ln(100/wt)/ 0.13 yrs⁻¹

(100/wt) = ln (10.6×0.13)

      Wt  = 25.7 %.  

Therefore, 25.7 % cobalt -60 sample will remain after 10.6 years.

Find more on nuclear decay:

brainly.com/question/21114779

#SPJ1

One mole of electrons is equal to Avogadro's number of electrons, which is 6.02 x 10^23 electrons. So, the number of moles of electrons delivered by the battery can be calculated as follows:

Next, we know that each mole of sulfuric acid delivers 2 moles of electrons, so the number of moles of sulfuric acid used up is n/2.

Mole comes from the word moles which means a certain amount of mass or in other water a small amount of mass. In chemistry, the mole is the unit for the amount of a substance. In the field of physics, mole has a standard definition as the amount of mass of a substance that contains as many particles as atoms contained in 12 grams of C-12.

Learn More about mole at brainly.com/question/15356425

#SPJ4

Copper is not a valid name for a cation in the options of the question. Hence option (I) copper is the correct option..

The chemical element copper (Cu) is a reddish, incredibly ductile metal belonging to Periodic Group 11 (Ib) that has an exceptional ability to conduct heat and electricity. Copper occurs naturally in its pure metallic state.

Copper is used by the body for a variety of vital processes, including the synthesis of connective tissues, blood vessels, and energy. Additionally, copper stimulates genes and supports the immunological and nervous systems. For the growth of the brain, the body also needs copper.

To know more about copper visit :

https://brainly.com/question/1990913

#SPJ4

Answer:

Specular reflection

Explanation:

Reflection is when light bounces off an object. If the surface is smooth and shiny, like glass, water or polished metal, the light will reflect at the same angle as it hit the surface. This is called specular reflection. Light reflects from a smooth surface at the same angle as it hits the surface

Answer:

B

Explanation:

Since the reflection of light (and other forms of electromagnetic radiation) occurs when the waves encounter a surface or other boundary that does not absorb the energy of the radiation and bounces the waves away from the surface. A material that relects light is bouncing it

Consequently, add 1453 ml water to 47 ml.

Water is a material that exists in gaseous, solid, and solid phases and is made up of the chemical atoms and oxygen. It is among the common and essential compounds.At normal temperature, it is a flavorless, odorless liquid with the crucial property of dissolving several other compounds.

H 2 O is another name for water. Water is most frequently used for drinking purposes. M2 m of hydrogen or one mole of oxygen make up dihydrogen monoxide, which is what it is. The object is liquid and is at room temperature.

3.13 * x = 1.5 * 0.1

x = 0.047L

So take 47 ml and add 1453 ml of water

To know more about water visit:

https://brainly.com/question/28465561

#SPJ1

Answer:

Na Atom

Explanation:

intermolecular forces are Ionic bond, Covalent bond, Hydrogen bond, Dipole-dipole interaction, Dispersion forces (Van der Waals forces).

Intermolecular forces are the forces that exist between molecules and determine many of their physical properties. These forces can be categorized into five main types: ionic bonds, covalent bonds, hydrogen bonds, dipole-dipole interactions, and dispersion forces (Van der Waals forces). Ionic bonds occur between ions with opposite charges and are the strongest intermolecular forces. Covalent bonds are formed by sharing electrons between atoms and are also strong. Hydrogen bonds are weaker than ionic and covalent bonds, but still play a significant role in molecular behavior. Dipole-dipole interactions occur between molecules with permanent electric dipoles. Finally, dispersion forces, also known as Van der Waals forces, are the weakest intermolecular forces and arise from the fluctuating electric fields generated by electrons. Understanding the relative strengths of these intermolecular forces is crucial for predicting and understanding the behavior of molecules.

Learn more about Intermolecular force here:

https://brainly.com/question/9007693

#SPJ4

The velocity of a proton released at point a on the top plate can be found using the concept of electrostatic potential.

The electric potential difference between two points is defined as the work done per unit charge in moving a small test charge from one point to the other. The velocity of a proton released with zero velocity can be found by calculating the electric potential difference between points a and b, and using the formula for kinetic energy:

K = qV,

where q is the charge of the proton, and V is the electric potential difference between points a and b. The velocity of the proton can then be found using the formula for kinetic energy:

v = √(2K/m),

where m is the mass of the proton.

It is important to note that in order to perform these calculations, information about the electric field and the potential difference between points a and b is needed. Without these details, it is not possible to find the velocity of the proton.

Learn more about velocity here:

https://brainly.com/question/26551488

#SPJ4

Integral proteins, also known as transporters, play a crucial role in transporting ions and molecules across the plasma membrane.

The plasma membrane is a lipid bilayer that acts as a barrier between the interior and exterior of a cell, controlling the movement of ions and molecules into and out of the cell.

Integral proteins are embedded in the lipid bilayer and have channels or binding sites that allow them to interact with ions or molecules on either side of the membrane. Some transporters are passive, allowing ions and molecules to diffuse down their concentration gradient. Others are active and require energy to pump ions or molecules against their concentration gradient.

Examples of transporters include:

Sodium-Potassium pump (Na+/K+ ATPase), which actively transports sodium ions out of the cell and potassium ions into the cell.

Glucose transporters (GLUTs), which are involved in the transport of glucose into cells.

Chloride channels, which allow chloride ions to diffuse passively across the membrane.

Overall, transporters play a crucial role in maintaining the ion and molecule balance within cells, and help to regulate a wide range of cellular processes, including cell volume, metabolic processes, and signal transduction.

To learn more about plasma membrane please click on below link

https://brainly.com/question/14015347

#SPJ4

a) d[C₈H₁₂]/dt = k * [C₄H₆]ᵃ, b) d[C₄H₆]/dt = -k * [C₄H₆]ᵃ . c) i. Zero order: ln([C₄H₆]0/[C₄H₆]) = -kt, [C₄H₆] = [C₄H₆]0 * e⁽⁻kt⁾, ii. First order:, ln([C₄H₆]/[C₄H₆]0) = -kt, [C₄H₆] = [C₄H₆]0 * e⁽⁻kt⁾, iii. Second order:, 1/[C₄H₆]=kt + 1/[C₄H₆]0, [C₄H₆] = 1 / (kt + 1/[C₄H₆]0), d) From the graphs in part (c), the experimental rate order of this reaction is first order. e) The experimental reaction rate constant, k, can be determined from the slope of the first order plot and has units of 1/s.

The balanced chemical reaction for the Diels-Alder condensation of butadiene (C₄H₆) to yield a substituted cyclohexene (C₈H₁₂) is C₄H₆+ C₄H₆-> C₈H₁₂. The overall differential rate law is d[C₈H₁₂]/dt = k * [C₄H₆]ᵃ, where k is the reaction rate constant and a is the reaction rate order. The differential rate law for C₄H₆is d[C₄H₆]/dt = -k * [C₄H₆]ᵃ. The rate order is determined from the linearized form of the data, which shows that the reaction is first order with a reaction rate constant k having units of 1/s.

a. The balanced chemical reaction and the overall differential rate law assuming the overall reaction rate is only a function of C₄H₆ concentration (CC₄H₆), reaction rate constant (k), and reaction rate order (a) is given by:
C₄H₆ + C₄H₆ -> C₈H₁₂
d[C₈H₁₂]/dt = k * [C₄H₆]ᵃ

b. The differential rate law for C₄H₆ is given by:
d[C₄H₆]/dt = -k * [C₄H₆]ᵃ

c. The linearized form of CC₄H₆ as a function of time for each reaction order:

i. Zero order:
ln([C₄H₆]0/[C₄H₆]) = -kt
[C₄H₆] = [C₄H₆]0 * e⁽⁻kt⁾

ii. First order:
ln([C₄H₆]/[C₄H₆]0) = -kt
[C₄H₆] = [C₄H₆]0 * e⁽⁻kt⁾

iii. Second order:
1/[C₄H₆] = kt + 1/[C₄H₆]0
[C₄H₆] = 1 / (kt + 1/[C₄H₆]0)

d. From the graphs in part (c), the experimental rate order of this reaction is first order.

e. The experimental reaction rate constant, k, can be determined from the slope of the first order plot and has units of 1/s.

Learn more about rate law here: brainly.com/question/30379408

#SPJ4

C13 and H1 different signals (c and h), and splitting and integration and approximate chemical shift.

An approximate chemical shift range for different nuclei (carbon, hydrogen) based on common observations in NMR spectroscopy.

Carbon (13C):

Chemical shift range: around 0-200 ppm

Hydrogen (1H):

Chemical shift range: around 0-12 ppm

Nuclear magnetic resonance (NMR) spectroscopy is a powerful analytical tool that is used to study the structure and composition of molecules. It is based on the concept that certain nuclei in a molecule, such as hydrogen, can absorb and emit electromagnetic radiation in the radio frequency range when exposed to a magnetic field. By analyzing the patterns of absorption and emission, NMR spectroscopy can provide information about the chemical environment and connectivity of atoms within a molecule.

This information can be used to determine the molecular structure, identify the different types of atoms within a molecule, and quantify the amounts of different chemical species present in a sample. NMR spectroscopy has a wide range of applications in fields such as biochemistry, medicinal chemistry, materials science, and environmental chemistry, and is essential for the study of many complex chemical systems.

To learn more about NMR spectroscopy visit here:

brainly.com/question/28543039

#SPJ4

The amount of copper atoms in the sample is 6.25 x 1024.

Copper has a density of 8.96 g/cm3. Copper is added in an amount of 8.13 cm3, or 8.13 mL. The volume is calculated by multiplying the length, breadth, and height. The fact that each of these dimensions measures exactly the same is good news for cubes. As a result, you can multiply any side's length by three.

The conversions that will be used are:

63.5 grams of copper per mole of copper

6.02 x 1023 copper atoms in a mole of copper

Multiplying the given mass by these conversions,

250 l * (1 mol Cu / 63.5 l Cu) * (6.02 x 10²³ Cu atoms / 1 mole Cu)

The sample contains 6.25 x 10²⁴ atoms of copper

To know more about copper atoms visit:-

https://brainly.com/question/5031537

#SPJ4

D = mass/volume

6.84g/cm^3 = 26.4g/x

solve for x

x = 3.86 cm^3 notice 3 sig figs

An inline style sheet includes the style sheet within the opening and closing tags of the HTML document; this type is used when you want to create styles for a single webpage that are different from the rest of the website.

Inline styling in HTML is the process of adding CSS styles directly to an HTML element. This allows you to specify the exact styling of an element without having to create a separate style sheet.

Inline styles are added directly to the HTML element using the style attribute. For example, if you wanted to make a paragraph red and bold, you would use the following code:

<p style="color: red; font-weight: bold;">This is a bold, red paragraph.</p>

Inline styles are generally used for small changes or for styling a single element. For larger changes, or for styling multiple elements, an external style sheet should be used.

Learn more about HTML

https://brainly.com/question/9069928

#SPJ4

Diethyl malonate, pentane-2,4-dione, and phenol are potent enough to totally react with a hydroxide ion.

Phenol, a type of aromatic alcohol, can react with a hydroxide ion to form a phenolate ion. This reaction occurs through a deprotonation reaction, in which the hydroxide ion removes a proton from the phenol molecule. The reaction can be considered complete as long as a sufficient amount of hydroxide ion is present.

Pentane-2,4-dione, also known as oxopentanedione, is a type of organic compound with two ketone functional groups. It is unlikely that it will react completely with a hydroxide ion, as the ketone functional groups are not basic and therefore, do not readily react with hydroxide ions.

Diethyl malonate, on the other hand, is a type of ester that can react with a hydroxide ion to form a malonate ester. This reaction occurs through a deprotonation reaction, similar to the reaction between phenol and a hydroxide ion. However, like pentane-2,4-dione, the reaction is unlikely to be complete unless a sufficient amount of hydroxide ion is present.

Learn more about Phenol:

brainly.com/question/10361409

#SPJ4

Answer: Hope this helps:

The balanced chemical reaction for the formation of sodium ion (Na+) and tetrahydroxyborate anion (B(OH)4-) from sodium tetrahydroxyborate (NaB(OH)4) is:

NaB(OH)4 → Na+ + B(OH)4-

This reaction represents the dissociation of sodium tetrahydroxyborate in water to form the sodium ion and tetrahydroxyborate anion, which are both strong electrolytes and therefore completely dissociate in aqueous solution.

The Lewis structure of no material will ever include an incomplete octet.

How do I determine an incomplete octet?

Some atoms of certain elements are capable of forming stable bonds with less than eight valence electrons. When this happens, it is believed that the atom of the element included in the molecule still has a portion of its octet.

These elements often include hydrogen, boron, aluminium, beryllium, and all of which are stable with just two valence electrons (stable with only 6 valence electrons). This is similar to the octet rule for all subsequent periods below period 1, with the exception of hydrogen, where a noble gas structure should be given two valence electrons instead (like He).

Covalent compounds in groups 2 and 3 can generate the valence electrons in stable compounds without a noble gas structure.

For such more question on Lewis structure

https://brainly.com/question/20300458

#SPJ4

The average kinetic energy of the gas molecules is decrease if the cabin temperature decreases.

The average kinetic energy of the gas molecules also falls with a drop in temperature. This indicates that in order for the pressure to remain constant, the volume must decrease in order to make up for the molecules' decreased average kinetic energy.

The average kinetic energy of the molecules in a body is measured by its temperature. The average kinetic energy of the molecules increases when a body's temperature rises. Similarly to this, lowering the temperature lowers the molecules' average kinetic energy.

To learn more about kinetic energy please visit
https://brainly.com/question/26472013
#SPJ4

From the two examples provided, the chemical formula Sg represents an element.

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

Learn more about elements,here:

https://brainly.com/question/13516179

#SPJ1