Answer:
d. working memory is the answer
a data analyst is making their data visualization more accessible. they separate the background and the foreground of the visualization using bright, contrasting colors. what does this describe?
A data analyst is improving the usability of their data visualization. They use bold, contrasting colors to visually distinguish between the visualization's foreground and backdrop.
What does it signify when the visualization's backdrop and foreground are distinguished by sharp contrasts in color?The content is simpler to notice when pieces of your data visualization are distinguished by dividing the foreground and background and using contrasting colors and forms. This can enable audience members with low vision have easier access to data visualizations.
In data analysis, what is data visualization?The depiction of data through the use of typical graphics, such as infographics, charts, and even animations, is known as data visualization. These informational visual displays convey complicated data linkages and data-driven knowledge.
To know more about data visit:-
https://brainly.com/question/11945666
#SPJ1
Question:
A data analyst is making their data visualization more accessible. They separate the background and the foreground of the visualization using bright, contrasting colors. What does this describe?
1. Text-based format
2. Labelling
3. Text alternatives
4. Distinguishing
you have recently been hired to complete a pending networking project where the cabling procedure providing fast ethernet has already been completed. on inspection, you realize that tia/eia-568 category 5 twisted pair has been used for the cabling procedure. what is the maximum bandwidth that you will allot with such a pair of wires in this scenario?
The maximum bandwidth that can be allotted for a TIA/EIA-568 Category 5 twisted pair cable is 100 Mbps (Megabits per second). This type of cable is designed to support Fast Ethernet, which is a standard for wired Ethernet networks with a maximum data rate of 100 Mbps.
A network connection's maximum capacity to transfer data through a network connection in a specific amount of time is indicated by a measurement known as network bandwidth.
The amount of bits, kilobits, megabits, or gigabits that can be transmitted in a second is typically used to describe bandwidth.
However, it's important to note that the actual bandwidth that can be achieved in a real-world scenario may be lower due to various factors such as cable length, quality of installation, and the presence of interference from other devices.
Here you can learn more about bandwidth
brainly.com/question/30519460
#SPJ4
you manage a windows server that is an active directory domain controller for your organization. you need to use command line tools to generate a list of all users in the domain and then view the value of the office property of each user. which command should you use?
The command to use is "dsquery user -domain <domain name> -attr office". This will generate a list of all users in the domain and their Office property values.
The command "dsquery user -domain <domain name> -attr office" will output user info and office values. This command can be used to query Active Directory domains from the command line. It will generate a list of all users in the domain and their Office property values. This command is useful in situations where you need to quickly generate a list of all the users in the domain and view their Office property values. It can also be used to troubleshoot Active Directory issues and retrieve additional information about users in the domain. This command is a useful tool for administrators who need to quickly obtain information about users in their domain, and the Office property values associated with each user.
Learn more about Commands here-
https://brainly.com/question/30319932
#SPJ4
you can provide the javascript for a web page in all but one of the following ways. which one is it? a script element in the html head element that refers to a javascript file a script element in the html head element that contains the javascript a head element in the html body element that refers to a javascript file a script element in the html body element that contains the javascript
JavaScript in a web page can be done using script elements in the head or body that either contain the JavaScript or refer to an external file, depending on the developer's preference and the script's requirements.
You can provide the JavaScript for a web page in the following ways:
Script element in the HTML head element that refers to a JavaScript file.JavaScript is contained in the HTML head element's script element.Script element that points to a JavaScript file within the HTML body element.JavaScript is contained in the HTML body element's script element.So, there is no option that cannot be used to provide the JavaScript for a web page.
All four options can be used to include JavaScript in a web page, and the choice of method depends on the specific requirements and preferences of the developer.
In general, it is recommended to include JavaScript in the head element when it needs to be loaded before the page content is displayed, or in the body element when it needs to interact with specific page elements. The external file reference is preferred for larger scripts as it can be cached and reused across multiple pages, improving page load times.
Learn more about JavaScript here:
https://brainly.com/question/30031474
#SPJ4
the capacity to change the conceptual schema without having to change the external schema is called logical data independence
The capacity to change the conceptual schema without having to change the external schema is called logical data independence is false.
What is Physical data independence?The capacity to change the conceptual schema without having to change the external schema is called Physical data independenceThe maximum amount of change to the physical schema that may be made without requiring software to be rebuilt is possible due to physical records independence.Without changing the conceptual or external view of the records, we extrude the physical store or stage in the procedure.The new modifications are taken into account with the assistance of mapping techniques. You can distinguish between internal/physical stages and conceptual stages because to the independence of physical records.It enables you to describe the database logically without having to mention specific physiological structures.Compared to logical independence, acquiring physical records independence is simple.The complete question is
the capacity to change the conceptual schema without having to change the external schema is called logical data independence true /false.
To learn more about conceptual schema refer to:
https://brainly.com/question/13014061
#SPJ4
how would you break a page at a specific location and continue to the next page?
In HTML, the "page-break-after" CSS property can be used to break a page at a specific location, while the "page-break-before" property can be used to break before a specific element.
A page break is a feature in page layout software that allows users to control where a page ends and the next one starts. This can be particularly useful in documents with a lot of text or multiple sections, as it helps to ensure that content is displayed in a clear and organized manner. Page breaks can be added manually by the user, or they can be automatically inserted by the software based on specific formatting or layout rules. For example, a page break may be automatically inserted after a certain number of lines or after a specific element such as a heading. In HTML, page breaks can be controlled using CSS properties such as "page-break-after" and "page-break-before." These properties allow developers to specify where a page break should occur in a web page, which can be particularly useful for print stylesheets.
To know more about Page Break Please click on the given link
https://brainly.com/question/14349355
#SPJ4
identify the type of virus that adds its code to the host code without relocating the host code to insert its own code at the beginning?
This type of virus is known as an 'overwrite' virus. It adds its own code to the host code in place, overwriting the original code.
An overwrite virus is a type of computer virus that inserts its own code into the code of a computer program or file, by overwriting the existing code. It does not relocate the host code to insert its own code at the beginning, but instead adds its own code directly to the existing code. Overwrite viruses usually spread quickly and cause major damage as they can corrupt valuable files or programs. Some of the most common overwrite viruses are the W32.Sobig virus, the W32.Mydoom virus, the W32.Nimda virus and the W32.Bugbear virus. They typically spread through email attachments, downloads, and network file shares, and can cause damage to both personal and business computers. As such, it is important to ensure that antivirus software is installed and regularly updated to protect against overwrite viruses.
Learn more about code here:
https://brainly.com/question/25774782
#SPJ4
Construct an array Construct a row array named observedValues with elements sensorReading1, sensorReading2, and sensorReading3. Your Function E save 「Reset MATLAB Documentation function observedValues = ConstructArray(sens orReadingi, sensorReading2, sen sorReading3) % Construct a row array name observedValues with elements % sensorReadingi, sen sorReading2, and sensorReading3 observedValues = 0; 4 7 end Code to call your function C Reset 1ConstructArray(5, 6, 7) Check if ConstructArray(33, 45, -10) returns [33, 45,-10]
Function observed Values = Construct Array(sensorReading1, sensorReading2, sensorReading3) observed SensorReadings = [sensorReading1, sensorReading2, sensorReading3]; end.
Define array?
Array in C can be defined as a method of clubbing multiple entities of similar type into a larger group. These entities or elements can be of int, float, char, or double data type or can be of user-defined data types too like structures.An array is a container object that holds a fixed number of values of a single type. The length of an array is established when the array is created.An array is a variable that can store multiple values. For example, if you want to store 100 integers, you can create an array for it. int data[100];An array is defined as the collection of similar type of data items stored at contiguous memory locations. Arrays are the derived data type in C programming language which can store the primitive type of data such as int, char, double, float, etc.To learn more about array refers to:
https://brainly.com/question/28061186
#SPJ4
write a web application that allows the customer to enter the letter of the plan the customer has purchased (a, a, b, b, or c, c) and the number of minutes that were used in a month, validates user input, calculates and displays the monthly charge in the browser. it also displays the amount of money the customer would save if a different plan could be chosen.
Web application in python to calculate the monthly charge according to the plan selected by the client. Flask is used as a development framework. An image of the code and output of the algorithm is attached.
Python codefrom flask import Flask
from flask import request, escape
app = Flask(__name__)
app. route("/")
def index():
val = request. args. get("val", "")
num = request. args. get("num", "")
return (
"""<p>**Calculates the monthly charge, and the amount of money the customer would save if a different plan could be chosen**"</p>"""
"""<form>Package A: ($9.95/month and 10 hours of access)<br/>
Package B: ($13.95/month and 20 hours of access)<br/>Package C: ($19.95/month and unlimited access)<br/>
</form>"""
"""<form action="" method="get">
Enter the letter of the plan the customer has purchased: <input type="text" name="val"><br/>
Enter the number of hours that were used: <input type="number" name="num"><br/>
<input type="submit" value="Calculate">
</form>"""
+ "Monthly charge: "
+ calculate(val, num)
)
app. route("/")
def calculate(val, num):
"""Calculates the monthly charge"""
try:
if val == "a":
if (int(num) < 10):
result = 9.95
else:
result = (int(num) - 10)*2 + 9.95
elif val == "b":
if (int(num) < 20):
result = 13.95
else:
result = (int(num) - 20) + 13.95
elif val == "c":
result = 19.95
return str(result)
except ValueError:
return "invalid input"
if __name__ == "__main__":
app. run(host="0.0.0.0", port=81, debug=True)
To learn more about Web application in python see: https://brainly.com/question/27993804
#SPJ4
the domain and the range of the reciprocal function are the set of all real numbers.
The statement that the domain and range of the inverse functions are the collection of all actual figures is false, according to the facts provided in the question.
What does domain mean?Describe domain. The term "domain," which is unique to the internet, can apply to both the structure of the internet and the organisation of a company's network resources. A domain is typically a sphere of expertise or a governing region.
Why do you require a domain?It's not technically necessary to have a domain name to establish a presence online. A domain that is your own is a need for boosting trust in your brand or company since it provides you control over the online persona and the material you upload.
To know more about domain visit:
https://brainly.com/question/1798747
#SPJ4
excel treats capital and small letters as the same, so specifying usa is the same as specifying usa, usa, etc. t/f
Excel handles capital and tiny characters equally, making it true that specifying "USA" is equivalent to specifying "usa," "Usa," etc.
What is Excel used for?Spreadsheets can be formatted, arranged, and computed by Microsoft Excel users. Database administrators and other people can make this information easier to examine as data is added or altered by organizing the data using tools like Excel. Excel's boxes are known as cells, and they're organized into rows and columns.
What is the Apple version of Excel?Numbers, which is part of most Apple products, allows you to create stunning spreadsheets with its outstanding tables and pictures.
To know more about excel visit:
https://brainly.com/question/3441128
#SPJ4
according to the cms transmittal a-03-021, which of the following does not meet specifications for verification of an electronic signature in the hospital setting? a. a system of auto-authentication in which a physician or other practitioner authenticates a report before transcription. b. a mail system in which transcripts are sent to the physician for review, and then he or she signs and returns a postcard identifying the record and verifying its accuracy. c. computerized systems that require the physician to review the document on-line and indicate that it has been approved by entering a computer code. d. a system in which the physician signs off against a list of entries that must be verified in the individual record.
According to cms release a-03-021, the option that does not meet the specifications for the verification of an electronic signature in the hospital environment is A mail system in which transcripts are sent to the physician for review, and then he or she signs and returns a postcard identifying the record and verifying its accuracy does not meet specifications for verification of an electronic signature in the hospital setting. The correct answer is B.
Electronic signatures are a secure and reliable way of verifying the accuracy of medical records in a hospital setting. They ensure that the record is accurate and that the person signing the record is who they say they are.
Electronic signature verification systems usually involve the use of encryption and digital signature algorithms to check the authenticity of the signature.
Learn more about Electronic signatures:
https://brainly.com/question/13041604
#SPJ4
when using true or false as criteria in a function, they are considered to be boolean values and therefore should not be put in quotes.
Every option argument is considered as a "OR" case in the COUNTIFS() function, which means that only one criterion needs to be true for item to be tallied.
Which two Boolean values are they?The two possible values for a boolean primitive data type variable are true and false (also known as boolean literals) and off. Relational and logic operators are used in boolean expressions. A Boolean expression has two outcomes: true or false.
What makes it a boolean value?A boolean value in computer science is one that can either be true or false. George Boole, an English mathematician, gave his name to the Boolean system. In Boole's different branch of mathematics, now referred to as Boolean Algebra, the result of true is 1, while the value or false is 0.
To know more about boolean values visit:
https://brainly.com/question/30145225
#SPJ4
13. at the command prompt, type vi sample1 and press enter to open the letter again in the vi editor. what is displayed at the bottom of the screen? how does this compare with step 9?
When you type vi sample1 at the command prompt and press enter, the file sample1 will be opened in the vi editor.
At the bottom of the screen, a status line is displayed, which shows information about the file being edited. The status line includes the name of the file, the current line number, and the mode that vi is in (e.g., command mode or insert mode).
This is different from step 9 because in step 9, the file was being opened for the first time, and the contents of the file were displayed on the screen. In this step, the file is reopened in the vi editor, and the status line is displayed at the bottom of the screen instead of the contents of the file.
Learn more about the vi text editor in a Unix-like operating system here: https://brainly.com/question/30433076
#SPJ4
why is it important for protocols configured on top of ethernet to have a length field in their header indicating how long the message is?
Having a length field in the header of protocols configured on top of Ethernet is important because:
it allows network devices to determine the boundaries of a message, which is necessary for proper processing of the data.
The length field indicates the total size of the packet, including the header and payload, in bytes.
This information is used by network devices, such as switches and routers, to determine the end of a packet and to properly forward or process it.
Without the length field, network devices would have difficulty determining where one packet ends and the next begins, leading to potential data corruption or loss.
The length field in a protocol header is a crucial component of network communication.
In a network, data is transmitted in the form of packets, which are composed of a header and a payload. The header contains information about the packet, such as its source and destination, as well as any additional control information needed for the packet to be properly processed by network devices.
The length field specifically tells network devices how many bytes the entire packet is, including the header and payload. This information is important because it allows network devices to determine where one packet ends and the next begins.
Without this information, network devices would have trouble processing the data correctly, as they would not know how much data to read before moving on to the next packet.
Learn more about length field in a protocol header:
brainly.com/question/29659609
#SPJ4
an application is requesting a service from the os, which consists of several steps. the current step is: setup parameters for the service in user mode. what is the next step?
The operating system of a computer is composed of a core program called the kernel, which typically controls every aspect of the system.
It is the area of the operating system's code that is permanently installed in memory and promotes communication between hardware and software elements. A complete kernel uses device drivers to manage all hardware resources (such as I/O, memory, and cryptography), resolve resource-related disputes between processes, and maximize the use of shared resources including CPU & cache usage, file systems, and network sockets. The kernel is typically one of the initial applications to load at system starting (after the bootloader). It manages the remainder of startup and converts program requests for memory, peripherals, and input/output (I/O) into instructions for data processing.
Learn more about operating here-
https://brainly.com/question/18095291
#SPJ4
you are trying to listen to audio cds on a windows system, but no audio is coming from the speakers. after checking the speaker cables, volume level, and the mute feature, you check device manager and see the dialog shown in the image below. which should you do?
The SoundMAX Integrated Digital HD Audio Driver device's driver has to be updated. The SoundMAX Integrated Digital HD Audio Driver device should be enabled.
A free driver called SoundMAX Integrated Digital Audio Driver enables your computer to play sound devices from a variety of manufacturers. Users of SoundMax audio cards must have it, and it is available for free download from the official SoundMax website. Drivers that are faulty or out of current might lead to hardware issues. Verify that your audio driver is current and update it if necessary. Attempt removing the audio driver if that doesn't work (it will reinstall automatically). Try using the Windows-bundled generic audio driver if that doesn't work.
To learn more about SoundMAX click the link below:
brainly.com/question/30504247
#SPJ4
Which best describes the difference between primary and secondary storage?primary storage is more expandable, while secondary storage is more flexibleprimary storage is fast but costly, while secondary is slow, larger and cheaperprimary storage is simpler to replace than secondary storage if it failsprimary storage is used only by the CPU, while secondary storage is used only by peripherals
In contrast to secondary storage, which is permanent, primary memory storages are merely transient.
How do primary storage and secondary storage differ from one another?Data is temporarily stored in primary memory, which is the computer's main memory. The permanent storage of data occurs in secondary memory, which is external. The CPU has immediate access to data kept in main memory, but secondary memory does not allow for such access.In contrast to secondary memory, which is often referred to as backup or auxiliary memory, primary memory is also referred to as internal memory. Data bus access is possible for primary memory, however I/O channels are required for secondary memory.In contrast to secondary storage, which is permanent, primary memory storages are merely transient. Secondary storage is more slowly paced than primary memory storage.To learn more about secondary storage refer to:
https://brainly.com/question/86807
#SPJ4
how do you select non-consecutive text in a document?
Answer:
Assuming a Windows-based OS, in most word processing programs, you would select the first text portion by dragging and selecting
Then any subsequent portions can be selected without losing the first selection by holding down the Ctrl key, dragging and selecting
Explanation:
which of the following is recommended in the context of a comprehensive security plan? a. employees should be trained in security measures. b. management should expect employees to implement their own training. c. employee passwords and id badges should be periodically revoked. d. participants should receive certificates before training sessions.
a. Employees should be trained in security measures.
Training employees in security measures is a crucial aspect of a comprehensive security plan. This helps to ensure that all staff members understand the importance of maintaining secure systems and processes and can take appropriate actions to protect sensitive information.
A comprehensive security plan is a thorough and well-structured approach to protecting an organization's assets, information, and systems from potential threats and security breaches. It includes various measures, policies, and procedures aimed at ensuring the confidentiality, integrity, and availability of sensitive information. These measures may include employee training, implementing technical controls like firewalls and encryption, performing regular security assessments, and having a plan in place for responding to security incidents. The goal of a comprehensive security plan is to reduce the risk of security incidents and minimize their impact should they occur. A well-designed security plan should be reviewed and updated regularly to ensure that it remains effective in the face of changing technology and threat landscapes.
To know more about Comprehensive Security Plan Please click on the given link
https://brainly.com/question/5457646
#SPJ4
write three statements to shift the samplereadings' contents 1 position to the left. the rightmost element after shifting should be assigned
To shift the SampleReadings' contents 1 position to the left and assign the rightmost element with -1, you can use the following three statements:
var shiftedValues = SampleReadings.slice(1);
shiftedValues[shiftedValues.length - 1] = -1;
SampleReadings = shiftedValues;
The three statements provided shift the contents of the SampleReadings array one position to the left. The first statement creates a new array called shiftedValues that is a copy of SampleReadings but with the first element removed. The second statement then assigns the rightmost element of shiftedValues to -1. The third statement then assigns SampleReadings to the new shiftedValues array.
This sequence of steps shifts the contents of SampleReadings one position to the left, with the rightmost element becoming -1.
Learn more about programming
https://brainly.com/question/26134656
#SPJ4
what c++ requires a type specifier for all declarations?
The return type of a method or function, or failing to declare the datatype of a variable, are both examples of this error.
What is data type and examples?Data is categorized into different types by a data type, which informs the compiler or interpreter of the programmer's intended usage of the data. Numerous data types, including integer, real, characters or string, and Boolean, are supported by the majority of programming languages.
What is datatype used for?An attribute of a piece of data known as a "data type" instructs a computer network how and where to interpret that data's value. Knowing the different sorts of data helps to ensure that each property's value is as expected and that data is collected in the correct format.
To know more about datatype visit :
https://brainly.com/question/13101293
#SPJ4
you manage a windows server that functions as your company's domain controller. you want to test a new network application in a lab environment prior to rolling it on to your production network. to make the test as realistic as possible, you want to export all active directory objects from your production domain controller and import them to a domain controller in the test environment. which tools could you use to do this? (select two. each option is a complete solution.)
You could use the following two tools to export and import Active Directory objects from the production domain controller to the test environment: NTDSUTIL and Active Directory Users and Computers.
NTDSUTIL: This is a command-line tool that can be used to export the Active Directory database to a file, and then import the database file to another domain controller.Active Directory Users and Computers: This is a graphical user interface (GUI) tool that is included with the Microsoft Management Console (MMC). You can use this tool to export objects to a file and then import the objects from that file to another domain controller.Here you can learn more about domain
brainly.com/question/29812839
#SPJ4
the set of alternating bits in a frame that allows a computer to synchronize to the incoming frame is the .
Devices on the network can simply synchronize their receiver clocks by using the preamble, which is composed of a 56-bit (seven-byte) pattern of alternate 1 and 0 bits. This provides bit-level synchronization.
Start frame delimiter fields and the preamble: Synchronization between the sending and receiving devices is accomplished via the Preamble (7 bytes) and Start Frame Delimiter (SFD), also known as the Start of Frame (1 byte), fields. The preamble is the first 8 bytes. The preamble is used to synchronize a receiving clock before data is transmitted in some Ethernet systems because they don't always transmit continuously. The Constitution's preamble lays out its foundation (Archives.gov). It expresses the document's intent and goal in a straightforward manner.
Learn more about network here-
https://brainly.com/question/13112019
#SPJ4
how does redis handle multiple threads (from different clients) updating the same data structure in redis?
The correct answer is How is it handled by Redis when numerous threads from various clients are updating the same data structure What is the suggested top.
A data structure is an intelligently created system for organising, processing, retrieving, and storing data. Data structures come in both simple and complex forms, all of which are made to organise data for a certain use. Users find it simple to access the data they need and use it appropriately thanks to data structures. A data structure is referred to as a "linear data structure" if its parts are arranged sequentially or linearly and each member is linked to both its simultaneously subsequent & following neighbouring elements.
To learn more about data structure click on the link below:
brainly.com/question/12963740
#SPJ4
Which of these hardware components can you use to store videos? A. External RAM B. Floppy disk. C. Hard drive. D. Motherboard
The difficult drive, also known as a hard disk drive. This is the hardware component responsible for storing all your pc facts from documents, pictures, and videos to programs, applications, operating systems, and a lot more.9 Mar 2022
What is the most frequent kind of storage machine for transferring files?A regular hard drive (HDD) is one of the most common types of media storage devices. Built with a bodily spinning disk inside a steel casing, HDDs offer long-term reliability and storage for most users.
What are the 4 essential hardware aspects of a computer?
Image result for Which of these hardware aspects can you use to shop videos? A. External RAM B. Floppy disk. C. Hard drive. D. MotherboardThere are 4 primary pc hardware aspects that this weblog put up will cover: enter devices, processing devices, output devices and reminiscence (storage) devices. Collectively, these hardware factors make up the computer system.
Learn more about Hard drive. D. Motherboard here;
https://brainly.com/question/30394713
#SPJ4
write a program that prompts the user to enter the final account value, the annual interest rate in percent, and the number of years, and then displays the initial deposit amount
Here is a Python program that uses the reasoning you mentioned: (Scroll down to view)
What is the main use of Python?Python is frequently used for creating websites and applications, automating repetitive tasks, and analyzing and displaying data. Python has been used by many non-programmers, including accountants & scientists, for just a variety of routine activities including managing finances since it is very simple to learn.
def calculate_initial_deposit(final_value, annual_interest_rate, num_years):
return final_value / (1 + annual_interest_rate / 100 / 12) ** (num_years * 12)
final_value = float(input("Enter the final account value: "))
annual_interest_rate = float(input("Enter the annual interest rate in percent: "))
num_years = int(input("Enter the number of years: "))
initial_deposit = calculate_initial_deposit(final_value, annual_interest_rate, num_years)
print("The initial deposit amount is:", initial_deposit)
To know more about python visit :
https://brainly.com/question/13090212
#SPJ4
in debugging mode, which function key is will execute a library procedure, then stop on the next instruction after the procedure?
Answer:
f10 is the key hope it helps
what are examples of tasks that are typiccally performed during software development? select all that apply
Here are some common tasks performed during software development:
Requirements gathering and analysisDesign and architectureImplementation or codingTesting and quality assuranceDeployment and maintenanceDocumentationProject management and trackingCollaboration and communication with stakeholders.What is a software?A software refers to a set of executable instructions (codes) that is typically used to instruct a computer system or a personal computer (PC) on how to perform a specific task and proffer solutions to a particular problem.
The types of software.
Generally, there are three (3) main types of software based on their uses and these include:
System softwareUtility softwareApplication softwareIn Computer technology, an application software can be designed and developed as a commercial software or in-house software. Also, it is mainly used to perform a variety of tasks on a computer system or a personal computer (PC).
Here you can learn more about A software
brainly.com/question/26536930
#SPJ4
the delineates the chain of command, indicates departmental tasks and how they fit together, and provides order and logic for the organization. a. employee directory b. structural table c. structural chart d. organizational chart
Organizational chart is a visual representation of the chain of command, tasks, and their relationships within an organization.
Organizational chart is a visual representation of the chain of command, tasks, and their relationships within an organization. It is used by managers to understand the structure of the organization, the roles and responsibilities of each department, and who reports to whom. It also serves to quickly identify the decision-makers and decision-making processes in the organization. The chart usually contains the names of the people who hold positions in the organization and their titles, as well as the name of the organization itself. It also shows the relationships and lines of authority between departments and individuals. This helps to clarify the roles and responsibilities of each person and ensures that everyone is aware of who they should contact if they need to discuss something with someone in another department or division. The organizational chart also helps the organization to stay organized and efficient.
Learn more about Commands here-
https://brainly.com/question/30319932
#SPJ4