Choose the correct wavelength (405 or 500 nm) based on your evaluation of the absorption spectrum just taken. explain the correct choice of wavelength.

The magnitude of a point charge is 0.189 x 10⁻⁹C.

We have stated that the point charge's electric field is E=2.5 N/C.

Distance from point charge R = 51 cm = 0.51 m

We are aware that the electric field resulting from a point charge is given as E = 1 / 4π∈₀ × Q / R²

so 2.5 = 9 x 10⁹ Q/ 0.68²

The magnitude of a point charge is 0.189 x 10⁻⁹C.

The electric force per unit charge is referred to as the electric field. It is assumed that the field's direction corresponds to the force it would apply to a positive test charge.

From a positive point charge, the electric field radiates outward, and from a negative point charge, it radiates in.

learn more about electric field here

https://brainly.com/question/14372859

#SPJ4

The reason why voltage across the inductor and capacitor can have higher magnitudes than that of input source voltage is because of electrical energy's oscillation between magnetic and electric field.

When current passes through an inductor a magnetic field is produced and the collapsing magnetic field produced by the inductor charges the capacitor. This process repeats itself causing the electrical energy to oscillate between magnetic and electric field. Because of this oscillation, at resonance, voltage across the inductor and capacitor can be greater than the input voltage.

For a RLC circuit,

[tex]V_{s}[/tex] = [tex]\sqrt[]{V_{R}^{2} + (V_{L} - V_{C})^{2} }[/tex]

where,

[tex]V_{R}[/tex] = Voltage across the Resistor

[tex]V_{L}[/tex] = Voltage across the inductor

[tex]V_{C}[/tex] = Voltage across the capacitor

At resonance,

[tex]V_{L}[/tex] = [tex]V_{C}[/tex]

Therefore, the reason why voltage across the inductor and capacitor can have higher magnitudes than that of input source voltage is because of electrical energy's oscillation between magnetic and electric field.

To know more about RLC circuits

https://brainly.com/question/13092725

#SPJ4

From the options provided in the question, the measurement which is not an SI base unit is volume.

This is referred to as the standard and fundamental unit of measurement of various quantities or variables which is defined arbitrarily and not by combinations of other units.

Volume is a quantity which is derived from the combination of lengths in a  three-dimensional manner which is why the formula is length× breadth×height and the unit is cm³. This is gotten from the combination of the unit of length which is cm.

This is therefore the reason why volume was chosen as the most appropriate choice.

Read more about Volume here https://brainly.com/question/463363

#SPJ1

Answer:

They appear to recede from our viewpoint.

That is, their emitted spectra are shifted toward the red (red-shift).

The wave-lengths that are received on earth are somewhat longer because of the "Doppler" shift of the receding atoms.

When the road and weather are ideal, the three-second rule is advised for passenger cars. When driving in bad weather or when visibility is poor, slow down even more and widen your following space. If you are operating a bigger vehicle or pulling a trailer, you should also widen your following distance.

Distance is a measure of how far away two objects or locations are using numbers. Distance can refer to a physical length in physics or to an estimate based on other factors in ordinary language (e.g. "two counties over"). It is occasionally used to indicate the distance between two points[tex]{\displaystyle |AB|}|AB|[/tex]. The terms "distance from A to B" and "distance from B to A" are frequently used interchangeably. A distance function or metric is a technique to describe what it means for components of a space to be "near to" or "far away" from each other in mathematics. It is an extension of the idea of physical distance.

To know more about distance, visit;

https://brainly.com/question/15172156

#SPJ4

Answer:

A mature star is a star that has exhausted its supply of hydrogen

Explanation:

For the most part, a star is powered by nuclear fusion. The energy is first produced by the fusion of hydrogen atoms in the core of a main-sequence star. Later, when the helium predominates in the core, stars like the Sun begin to fuse hydrogen along a spherical shell around the core. This allows the star to steadily increase in size, passing through the subgiant stage and eventually reaching the red giant stage.

When they reach this stage, the hydrogen in them nearly completely depletes, and they get brighter and hotter, eventually becoming low-mass white dwarfs.

When a star's supply of hydrogen in its core runs out, leaving only helium, the outward force provided by fusion begins to diminish, and the star can no longer maintain equilibrium. When the force of gravity exceeds the force of internal pressure, the star begins to disintegrate. The outcome of this collapse is determined by the mass of the star.

To learn more about what happens to hydrogen in the core of stars. Click, https://brainly.com/question/1642962

#SPJ4

The correct answer is centrifuge.

Your complete blood is drawn out during an apheresis procedure, which is used to donate platelets. Your blood is spun in a centrifuge to separate your plasma, platelets, and red blood cells. As the blood is divided, the heavier reds cells drop to the bottom and are given back to you.

Between the liquid plasma and the platelets that are tracked into a small pouch that is wrapped around the centrifuge cylinder as the liquid plasma rises. When you donate blood, your spleen releases stockpiled platelets into your bloodstream in an effort to stop the bleeding.

As a result, more platelets and plasma are collected, enabling you to donate one, two, or even three doses of platelets in a single visit. Your healthy bone marrow quickly starts producing additional platelets from stem cells to replace those that have been given while this is happening.

Since only one donor is used for the donation, platelet donors are able to provide patients with a greater amount and higher-quality platelets to aid in their fight for survival.

To learn more about platelet refer the link:

https://brainly.com/question/10920210

#SPJ9

The electric field strength  = 1104.31 N/C

When charged particles, including electrons, are accelerated, an electromagnetic field, also known as an EM field, is created. Electric fields surround all electrically charged particles. Particles in motion generate magnetic fields.

Electromagnetic fields can be found throughout our environment yet are undetectable to the  eye. Electric fields are created by the local accumulation of electric charges inside the atmosphere caused by thunderstorms.

diameter of rings, d = 10 cm

Distance between the rings, r = 18 cm

Charge of the rings, q = 40 nc

The electromagnetic field strength at the rings' midway is computed as follows:

E[tex]_n_e_t[/tex] = E₁ - E₂

E[tex]_n_e_t[/tex] = E₁(₊ve) - E₂(-ve)

The strength of the electric field at the center of a left ring is computed as follows;

[tex]E=\frac{k q L}{\left(R^2+L^2\right)^{3 / 2}}\\[/tex]

E = [tex]E=\frac{9 \times 10^9 \times 20 \times 10^{-9} \times 0.18}{\left(0.05^2+0.18^2\right)^{3 / 2}}[/tex]

E = 1104.31 N/C

To know more about electromagnetic field visit:

https://brainly.com/question/14606878

#SPJ4

The depiction of changing chemical compounds that best describes the flow of nitrogen from the atmosphere, through the nitrogen cycle, and back into the atmosphere is N2 → NH4+ → NO3- → N2

Ammonification: The formation of ammonia or its compounds from nitrogenous compounds, especially as a result of bacterial decomposition. It is given by this equation: N2 → NH4+

Nitrification: The biological oxidation of ammonia with oxygen into nitrite followed by the oxidation of these nitrites into nitrates. It is given by this equation: NH4+ → NO3-

De-nitrification: A microbially facilitated process of nitrate reduction that may ultimately produce molecular nitrogen (N2) through a series of intermediate gaseous nitrogen oxide products.

NO3- → N2

To learn more about nitrogen cycle. Click https://brainly.com/question/1593859

#SPJ4

Yes, the energy transmission is increased by an object's mass.

When two objects come into touch, they collide. When two items collide, energy is transferred from one thing to the other. Energy is the power to perform tasks (or in more simple terms: energy makes things happen). Any two items that are acting in response to one another create a pair of forces that are of the same size but acting in the opposite direction.

The amount of energy exchanged during a collision depends on the weight and speed of the moving object; bigger objects carry more energy. This explains why truck collisions cause such severe automotive damage. In a collision, the energy carried by the large truck is transferred to the lighter vehicle.

To learn more about energy refer to:   https://brainly.com/question/1932868

#SPJ4

Answer:

11760 kg / (m-s^2)

Explanation:

Just do the units FIRST

kg    m   m

m^3  s^2  1      

     now you can see that the two m's in the top cancel two m's in the denominator and you are left with

kg/ (m-s^2)   as units        

Now do the numbers

1000 * 9.8 * 1.2 = 11760

so answer is   11 760  kg / (m-s^2)  

Copernicus measurements of the orbital radii of six of the planets were very accurate compared to our modern values.

Nicolaus Copernicus created the Copernican heliocentrism astronomical theory, which was first presented in print in 1543. This theory put the Sun in the centre of the cosmos, stationary, and had Earth and the other planets orbit it at uniform speeds in circular orbits modified by epicycles. The geocentric Ptolemaic paradigm, which put Earth at the centre of the cosmos for ages, was replaced by the Copernican model.

Although he had shared a draught of his own heliocentric theory with peers before 1514, he did not choose to publish it until after being persuaded to do so by his student Rheticus.

To know more about Copernican heliocentrism, visit:

https://brainly.com/question/4982992

#SPJ4

The volume in units of  in^3 is 6030.72 in^3.

The volume in units of 6.03x10^3 in3

1ft = 12 inch

So to convert foot into inches we have to multiply by 12

The volume of container = 3.49ft^3

=3.49×12×12×12

= 6030.72 in^3

The amount of space a container encloses, or how much room is inside of it, is measured by its volume. The volume of a box can be calculated using this straightforward formula: volume V = L × W × H for a box with height H, width W, and length L.

Many different units can be used, however because of the way this formula is written, the volume would have length to the third power dimensions. For instance, if the container's measurements are given in metres, the capacity of the box will be given in metres squared, or m3.

To learn more about volume of a container, visit:

https://brainly.com/question/9092584

#SPJ4

The earth is an open system for energy. Sunlight should be added to the pyramids to make them correct.

A system that is in touch with its surroundings or the external environment through the exchange of energy, matter, and materials is called an open system.

In an open system, the energy and matter flow in and out of the boundaries of the system. Earth is a perfect example of the open system as it is in contact with its surroundings.

The exchange between materials such as energy and information takes place in such a system.

The stove top is an example of an open system because in this system the exchange of both heat and moisture occurs with the surrounding. On the other hand, in a closed system, only energy is exchanged.

If you need to learn more about earth click here:

https://brainly.com/question/26221772

#SPJ4

According to the net force, the acceleration of the book is 16.47 m/s².

We need to know about force to solve this problem. According to second Newton's Law, the force applied to an object will be proportional to mass and acceleration. Hence, it can be written as

∑F = m . a

where F is force, m is mass and a is acceleration

From the question above, we know that

m = 3 kg

g = 9.8 m/s²

F1 = 20 N

Find the net force

∑F = F1 + W

∑F = 20 + m . g

∑F = 20 + 3 . 9.8

∑F = 20 + 29.4

∑F = 49.4 N

Find the acceleration

∑F = m . a

49.4 = 3 . a

a = 16.47 m/s²

Find more on force at: https://brainly.com/question/25239010

#SPJ4

The maximum height of the particle is 100feet

Applying linear motion equations,

v^2 = u^2 - 2as

v = final velocity

u = initial velocity

g = acceleration due to gravity

s = height travelled

At max height,

velocity = 0 i.e. V=0,  initial velocity u = 16ft/sec

g = 32ft/[tex]sec^{2}[/tex]

so we have

0 = [tex]u^{2}[/tex] -2gs

S = [tex]u^{2}[/tex]/2g

= 16*16/2*32

= 4 feet

So maximum height = initial height + height travelled

= 96 + 4 = 100 feet

The range is u2sin2g and the needed value of the maximum height is u2sin2g. Not to be confused with flying time is the maximum height attained.

Maximum Height refers to a structure or sign’s highest point as measured from the average natural ground level at the base of the supporting structure.

To know more about projectile motion visit:

https://brainly.com/question/11049671

#SPJ4

Answer:

100 feet

Explanation:

In the photoelectric effect, a beam of light impinges on metal, and it is observed that electrons are ejected from the metal in greater numbers as the intensity of light increases.

In physics, the photoelectric effect refers to a phenomenon in which the emission of charged particles takes place from a material or substance after absorbing electromagnetic radiation.

When light hits the surface of the material then electrons are released known as photoelectrons.

This phenomenon better explains the quantum nature of electrons and light.

Moreover, the study of the dual nature of wave particles has further expanded the scope, investigation, and understanding of the matter.

If you need to learn more about the photoelectric effect click here:

https://brainly.com/question/18559169

#SPJ4

To make a 200 ml solution of 5 mm sucrose from a 100 mm sucrose solution we have to take a volume of: 10ml of the concentrated solution

To solve this problem, the formula and the procedure that we have to use is:

c1 * v1 = c2 * v2

Where:

Information about the problem:

Applying the dissolution of concentrations formula and clearing the volume of the concentrated solution (c1) we get:

c1 * v1 = c2 * v2

v1 = (c2 * v2)/ c1

v1 = (5 mm * 200 ml)/ 100 mm

v1= 10 ml

In chemistry a solution is known as a homogeneous mixture of two or more components called:

Learn more about chemical solution at: brainly.com/question/13182946

#SPJ4

A car goes through a circular highway ramp while maintaining constant speed. The correct statement is the velocity of the car is zero.

This is defined as the rate of change of distance with time and is a vector quantity which measures both the rate and the direction of the motion.

A car maintaining constant speed means that distance covered is also 0m and the formula for velocity is distance / time.

This therefore means that velocity = 0m / 5s where time can be any digit.

This will result in the velocity being zero which is therefore the reason why it was chosen as the correct choice.

Read more about Velocity here https://brainly.com/question/6504879

#SPJ1

In an inductive circuit with an uncorrected power factor of 40 percent to 60 percent, the power factor can be corrected to within 5 percent of unity by the addition of a(n) capacitor.

A capacitor is a gadget that stores electrical energy in an electric field. It is an inactive electronic part with two terminals. The impact of a capacitor is known as capacitance. A capacitor is a gadget that stores electrical energy in an electric field. It is an uninvolved electronic part with two terminals. The impact of a capacitor is known as capacitance. While some capacitance exists between any two electrical conduits in closeness in a circuit, a capacitor is a part intended to add capacitance to a circuit. The capacitor was initially known as a condenser or compensator. This name and its cognates are still generally utilized in numerous dialects, yet seldom in English, one eminent exemption being condenser mouthpieces, likewise called capacitor receivers.

Learn more about capacitor, refer:

https://brainly.com/question/27753307

#SPJ4

With the same force applied, the acceleration of car with three passengers is 1.04 m/s².

We need to know about force to solve this problem. According to second Newton's Law, the force applied to an object will be proportional to mass and acceleration. Hence, it can be written as

F = m . a

where F is force, m is mass and a is acceleration

From the question above, we know that

mcar = 1600 kg

a0 = 1.2 m/s²

mpassenger = 80 x 3 kg = 240 kg

As we know that the force of car is the same whether there are passengers or no. Hence, we can write

F = F

mcar . a0 = mtotal . a

1600 . 1.2 = (1600 + 240) . a

1920 = 1840a

a = 1.04 m/s²

Find more on force at: https://brainly.com/question/25239010

#SPJ4

Rotation curves for spiral galaxies show (C) most have dark halos since It appears that spiral galaxies are encased in the substantial dark matter "halos".

Abstract The main method for ascertaining the mass distribution in spiral galaxies is to analyse the rotation curves of spiral galaxies. They offer vital knowledge for comprehending spiral galaxies' dynamics, evolution, and creation. This substance, which has mass but emits no light, is referred to as "dark matter." The dispersion of dark matter appears to extend much beyond the host galaxy's borders, according to the rotation curves of satellite galaxies.

Rotation curves are used by astronomers to calculate the masses of specific spiral galaxies. There is more mass between the stars and the galactic centre the quicker the stars orbit the galaxy's centre.

To learn more about Spiral galaxies visit:

https://brainly.com/question/28195788

#SPJ4

Wavelength of radiation must be used to eject electrons with a velocity of 2300 km/s is 63.9nm.

Einstein's equation for the photoelectric effect

hv = A + W

Where,

Energy of photon : E = hvx = hxc/λ

The work function for chromium is A

Planck's constant h= 6.626X 10⁻³⁴ Js

speed of light c = 2.998X10⁸ m/s

Velocity of 2300 km/s = 2300 X 10⁶ m/s

The kinetic energy of emitted electron

W = mv²/2 = (9.10939 X 10⁻³¹ kg X (2300X10⁶ m/s)²)/2 = 2.409X10⁻¹⁸

Hence,

    λ = ch/A+W

λ = (6.626X10⁻³⁴JsX2.998X10⁸m/s)/(7X10⁻¹⁹J + 2.409X10⁻¹⁸J)

  = 19.865X10²⁶Jm/3.109X10⁻¹⁸J = 6.39X10⁻⁸= 63.9 nm

Wavelength of radiation must be used to eject electrons with a velocity of 2300 km/s is 63.9nm

Learn more about the wavelength with the help of the given link:

https://brainly.com/question/12924624

#SPJ4

I understand that the question you are looking for is "The work function for chromium metal is 7.0 x 10-19 J (4.37 eV). What wavelength of radiation must be used to eject electrons with a velocity of 2300 km/s?"

An good example would be using a Bunsen burner to heat water in a tin container. The flame initially heats the tin can by radiating heat. Conduction then transfers heat from the tin can to the water. The convection process causes the hot water to then climb to the top.

A laboratory piece of equipment known as a Bunsen burner, which bears Robert Bunsen's name, produces a single open gas flame and is used for heating, sterilization, and combustion. Natural gas, liquefied petroleum gas, such as propane, butane, or a combination, are all acceptable choices for the gas.

To know more about Bunsen Burner visit:

https://brainly.com/question/743920

#SPJ4

A westward-moving motorcycle increases its speed from 5.0 m/s to 25.0 m/s in 2.5 seconds. Magnitude= direction=

Calculation

The magnitude comes according to the formula (V-U)/T

Here U (initial velocity) = 5 m/s

V (final velocity) = 25 m/s

Time taken (T) = 2.5 s

So, going according to the formula,

we will have the magnitude = (25 – 5)/ 2.5

So, the magnitude is 20/2.5 = 8

So, the magnitude is 8

And since the speed is increasing, hence the direction would be in the same direction as the body is moving. It means the direction is in westward direction.

To know more about magnitude and direction, visit:

https://brainly.com/question/2085280

#SPJ4

Displacement is the change in position of an object. Displacement is a vector quantity.

As for the given options, option (a) is the definition of Force. Option (b) is the definition of velocity. Option (d) is the definition of motion. Displacement is the shortest distance between initial point and final point whereas distance is the total distance covered from initial point to final point.

Since displacement is a measure of length, its unit is usually meter. It is denoted as Δx. The formula for calculating displacement is Δx = [tex]x_{2}[/tex] - [tex]x_{1}[/tex], where [tex]x_{2}[/tex] is the final position and [tex]x_{1}[/tex] is the initial position.

Therefore, Displacement is the change in position of an object.

To know more about Displacement

https://brainly.com/question/28609499

#SPJ1

The kinetic energy of a he2 ion released from rest and accelerated through a potential difference of 2.5 is 4.32J.

In material science, the motor energy of an article is the energy that it has because of its movement. It is characterized as the need might have arisen to speed up a body of a given mass from rest to its expressed speed. Having acquired this energy during its speed increase, the body keeps up with this dynamic energy except if its speed changes. A similar measure of work is finished by the body while decelerating from its ongoing pace to a condition of rest. At the point when work is finished on an item, energy is moved, and the article moves with another steady speed. We call the energy that is moved motor energy, and it relies upon the mass and speed accomplished. Active energy of an item is the proportion of the work an article can do by uprightness of its movement.

Learn more about kinetic energy, refer:

https://brainly.com/question/28308469

#SPJ4

It is crucial to warm crucibles before use to lessen thermal stress on them.

Crucibles and covers are made up of porcelain that are like ceramic that contains pores in it. Any kind of water molecules from the air gets trapped in the pores of these crucible and cover.

These water molecules need to be driven out before the initial massing of the crucible and cover. The preheating helps to drive out these water molecules from the pores.

By raising the crucible’s temperature to 200°C, moisture will be removed in this step. Crucibles are protected from potential moister risk by the moister elimination procedure.

Crucibles that are brand-new or have seen a lengthy pause should be progressively heated to 200°C.

To know more about crucible and its heating, visit:

https://brainly.com/question/14904896

#SPJ4

Let g be a group An element of G is called Idempotent if g² = g.

(1)Show that every group has atleast one idempotent element.

Proof: Let G be a group and we know that every group has identity element let e G be a identity element

since e²=e

this shows that e is the idempotent element in G

Hence every group has atleast one idempotent element which is the identity element.

(2) Shows that group has at exactly one idempotent element.

Proof: Let G be a group Now by Part 1 we see that every group has e is the idempotent element.

Now let g∈G be idempotent element other than identity element.

since g is Idempotent.

g²=g

g.g=g

g.g=g.e   i.e. (g.e=g)

By left cancellation law we get

g = e

Thus e is the only Idempotent element is G.

hence Every group has at exactly Idempotent Element.

Any of more than 100 chemicals that cannot be divided into various substances using common chemical methods Elements include gold and carbon. There is a risk component to surfing  one of the constituent pieces of something.  The fundamentals of arithmetic, which are a subject of study.

To know more about Element visit:

https://brainly.com/question/13025901

#SPJ4