The diffusion coefficient (D) of a species can be calculated using the Arrhenius equation: D = D0 * exp(-Q/RT)
Where D0 is the pre-exponential factor, Q is the activation energy, R is the gas constant, and T is the temperature in Kelvin. For the diffusion of hydrogen through BCC iron, the activation energy is typically in the range of 85-105 kJ/mol. Using Q = 100 kJ/mol and T = 298 K (25°C), we can estimate D = [tex]2.2 * 10^-14 cm^2/s[/tex]. For the diffusion of H into Al, we already know D0 =[tex]0.11 cm^2/s[/tex]and Q = 9780 cal/mol. Converting Q to kJ/mol, we have Q = 40.8 kJ/mol. Using this value and T = 298 K, we can estimate D = [tex]7.3 * 10^-15 cm^2/s[/tex]. Based on these calculations, it is apparent that BCC iron would be better suited as the material for a high-pressure hydrogen storage tank due to its higher diffusion coefficient. The slower diffusion of hydrogen through aluminum would result in a lower rate of hydrogen uptake, making it a less suitable material for hydrogen storage applications.
The complete question is:
Calculate the diffusion coefficients for the diffusion of hydrogen through BCC iron and FCC aluminum at room temperature (25°C). For the diffusion of H into Al, D0 = 0.11 cm2/s and Q = 9780 cal/mol. Based on your calculations, which material would be better suited as the material for a high-pressure hydrogen storage tank?
Learn more about hydrogen here:
https://brainly.com/question/28060590
#SPJ4
Caffeine (C8H10N4O2) is a stimulant found in coffee and tea. A solution of caffeine in the solvent chloroform (CHCl3) has a concentration of 0.0520 m.
Part A:
Calculate the percentage of caffeine by mass in the solution.
Part B:
Calculate the mole fraction of caffeine in the solution.
Taking into account molality, percentage by mass, and mole fraction. The solution's proportion by mass is 0.952%. The solution contains 0.00587 moles of caffeine.
Is the stimulant present in coffee and tea called caffeine?The chemical caffeine stimulates (increases activity in) the brain and nervous system. Coffee, tea, soft drinks, and energy drinks are just a few beverages that contain caffeine. Caffeine can be found in chocolate. Oftentimes, energy drinks have more sugar and caffeine than soft beverages.
% by mass is equal to (mass of solute/mass of solution) * 100.
Regarding this:
caffeine, whose molar mass is 194.22g/mol, has a mass of 0.0490 moles (194.22g/mol) per 1 kilogramme of solution, or 0.00952 kg.
Then, the percentage by mass is calculated as:
Percentage by mass = (0.00952kg/ 1kg)*100
Solving:
Percentage by mass= 0.952%
The percentage by mass of the solution is 0.952%.
To know more about molality visit :-
https://brainly.com/question/29808886
#SPJ4
Which of the following is currently most often used to indicate the location of a signal on an IR spectrum? a. Vibration excitation (increase vibration) of the bonds. b. Rotational excitation (increase rotation) of the bonds c. Breaking of the bonds d. Electricfields appearing the molecule
The most popular technique for locating a signal on an IR (Infrared) spectrum is a. bond vibration excitation (increase in vibration). The basis for IR spectroscopy is light's interaction with molecules' vibrational modes.
Spectroscopy is the study of how electromagnetic radiation interacts with matter. It is a potent analytical method utilised in many disciplines, including physics, biology, and chemistry. In spectroscopy, a sample is subjected to electromagnetic radiation, and the interaction of the radiation with the sample that results is examined to learn more about the sample's structure, composition, and chemical and physical properties. There are various types of spectroscopy, such as IR (Infrared), UV-Vis (Ultraviolet-Visible), NMR (Nuclear Magnetic Resonance), and mass spectrometry. Each of these methods can be used for various studies and gathers data about the sample using various forms of electromagnetic radiation. To analyse the vibrational modes of bonds in a substance, IR spectroscopy, for instance, emits IR light.
Learn more about spectroscopy here:
https://brainly.com/question/28523860
#SPJ4
Upon solvation, energy is always: Select the correct answer below: O absorbed O released O constant O depends on the solution
Upon solvation, energy is always released. Correct answer: letter B.
This is because the energy required to break the bonds between the solvent molecules and the solute molecules is greater than the energy released when the solute molecules form new bonds with the solvent molecules.
The amount of energy released or absorbed during solvation is dependent on the type of solute and solvent, and the concentration of the solution.
In addition to the energy released or absorbed during solvation, the process also affects the thermodynamic properties of the solution. Generally, the entropy of a solution increases upon solvation due to the increased number of molecules and the increased number of possible states.
This leads to a decrease in the solution's temperature, as energy is released in the form of heat.
Learn more about energy:
https://brainly.com/question/29348171
#SPJ4
The apparatus shown below can be used to investigate the electrolysis of brine. What chemical
present in the sodium chloride solution provides the hydrogen that's collecting at the cathode?
The chemical present in the sodium chloride solution provides the hydrogen that's collecting at the cathode is water.
What is cathode ?In a polarized electrical device, the cathode is the metallic electrode through which current flows. An anode, on the other hand, is the electrode in a polarized electrical device through which current flows in from an external circuit.
NaCl is the formula for sodium chloride. So, The hydrogen had to be derived from the water in which the NaCl was dissolved. H2O is the formula for water.
Thus, The chemical present in the sodium chloride solution provides the hydrogen that's collecting at the cathode is water.
To learn more about the cathode, follow the link;
https://brainly.com/question/11920555
#SPJ1
the aromatic region 7-8 ppm of the proton NMR spectrum of compounds with para disubstituted benzene rings such as phenacetin is often referred to as an AB pattern. this pattern has two doublet signals coupled to each other. explain the origin of this AB pattern
Because there are two mutually connected nuclei in aromatic ring of phenacetin that are not related to other protons and whose shift differences are equal to coupling constant, ring displays AB pattern.
Why do protons exist on benzene deshielded?The ring protons in benzene experience deshielding because their chemical shift is 7.3 parts per million (ppm) as opposed to 5.6 for the vinylic proton in cyclohexene, and because the induced magnetic field outside the ring has the same direction as the external field.
What frequency range does proton NMR show benzene protons?Around 6–8 ppm of benzene contains protons. Due to the deshielding action of the aromatic ring, this is higher than the protons in other hydrocarbons like alkanes and alkenes.
To learn more about NMR spectrum visit:
brainly.com/question/29775399
#SPJ4
Answer:Due to the presence of two mutually connected nuclei and a shift difference equal to the coupling constant, the aromatic ring of phenacetin exhibits the AB pattern.
Explanation:
an proton in an electron rich environment will experience a (smaller/larger) blank1 - word answer please type your answer to submit magnetic field compared to the magnetic field applied to the sample by the instrument. this results in the chemical shift of the proton being shifted (upfield/downfield) blank2 - word answer compared a proton that experiences a magnetic field equal to the applied magnetic field.
A proton will encounter a reduced magnetic field in an environment where there are many electrons, which causes the proton's chemical shift to go downfield.
What causes a proton to move downward?
Electronegative substances that are also linked to carbon shift the resonance position of protons down field. By removing electron density from carbon and its directly bound protons, the electronegative element reduces the Be field's strength.
What causes proton peak downfield shifts?
The chemical shift shifts downfield (higher ppms) because the proton experiences a greater external magnetic field and hence requires a higher frequency to establish resonance.
To know more about proton visit:
brainly.com/question/1252435
#SPJ4
How many F atoms are in 5.54 g of F2?
1.6×10²³ atoms of F are there in 5.54 g of F[tex]_2[/tex]. It is also the smallest piece of substance with chemical element-like characteristics.
What is atom?The smallest unit of matter that may be split without producing electrically charged particles is the atom. It is also the smallest piece of substance with chemical element-like characteristics. As a result, the atom serves as the fundamental unit of chemistry.
Space makes up the majority of an atom. The remainder is made up of a cloud of electrons with negative charges around a positive-charged nucleus made up of protons and neutrons.
moles of F[tex]_2[/tex]=5.54 / 37.9=0.14
number of atoms of F[tex]_2[/tex] = 0.14×6.022×10²³=8.4×10²²atoms
number of atoms of F=2×8.4×10²²atoms=1.6×10²³ atoms
Therefore, 1.6×10²³ atoms of F are there in 5.54 g of F[tex]_2[/tex].
To know more about atom, here:
https://brainly.com/question/29712157
#SPJ1
which of the following options correctly describe how to calculate a molecular or formula mass for a compound? select all that apply.
Cations and anions have atomic masses that are almost identical to those of neutral elements. Ca(NO3)2 is an example of a formula. The formula/molecular mass is determined by adding the masses of the constituent elements in the right ratios.
How are the molecular mass and formula calculated?
By applying the relevant compound's chemical formula and atomic masses learned from the periodic table. The compound's formula or molecular mass is determined by adding the atomic masses in the right ratios. Which of the following statements best encapsulates the proper way to name a binary covalent compound? - With its roots and the prefix -ide, the second element is given a name.
Learn more about molecular mass from here:
https://brainly.com/question/14122402
#SPJ4
CAN SOMEONE HELP WITH THIS QUESTION?✨
Answer:
17.03 cm^3
Explanation:
V=π r ^2 h
= π · (1.02)^2 · 5.21
≈17.03 cm^3
(Radius is 1.02 b/c the question gave us diameter which is 2 times the value of radius so to get to radius we just divide diameter by 2)
ensuring that salespeople know the ethical and legal framework for their markets, including cultural and global market variations, is a salesforce response to which of the following issues?
A salesforce solution to accountability concerns is to ensure that salespeople are aware of the ethical and regulatory framework for their markets, including cultural and worldwide market variances.
Which of the following communication tactics does not entail face-to-face interaction between sales managers and salespeople?Sales managers have the right to discipline salesmen. As a result, they are often able to sway salespeople without resorting to coercion, threats, or promises.
Which of the following responsibilities for sales managers is the most crucial?One of a sales manager's most crucial responsibilities is inspiring the team. He needs to organise his team so that they work together as a single unit to achieve a common goal. He is responsible for making sure the team members get along well and don't fight.
To learn more about salesforce visit:
brainly.com/question/30002077
#SPJ4
____has a mass number of_______, 25 protons, and 30 neutrons.
Answer: 1) Mn 2) 55
Explanation:
One of the great aspects of the periodic table is that the amount of protons corresponds to the element’s atomic number. That said, 25 protons = 25 atomic number = Manganese (or Mn).
As for mass number, just add the number of protons to neutrons. 25 + 30 = 55
2.5 pts on a piece of paper, write balanced molecular, total ionic, and net ionic equations for the reaction between aqueous solutions of sodium hydroxide and nitric acid. select the number that corresponds to the sum of the coefficient for the net ionic equation.
A chemical equation is said to be balanced when the total charge and the number of atoms for each component of the reaction are the same for both the reactants and the products.
Balanced molecular equation:
NaOH(aq) + HNO3(aq) -> NaNO3(aq) + H2O(l)
Total ionic equation:
Na+(aq) + OH-(aq) + H+(aq) + NO3-(aq) -> Na+(aq) + NO3-(aq) + H2O(l)
Net ionic equation:
OH-(aq) + H+(aq) -> H2O(l)
The sum of the coefficients for the net ionic equation is 3.
Lye and caustic soda are other names for sodium hydroxide, an inorganic substance having the formula NaOH. It is a white, solid ionic substance made up of the cations sodium (Na+) and the anions hydroxide (OH).
For such more question on chemical equation
https://brainly.com/question/11904811
#SPJ4
alcohols can act as either acids or bases, similar to water. in the box below draw the products of the following reaction: you should include all products. include counter-ions, e.g., na , i-, in your submission, but draw them in their own separate sketcher. separate multiple products using the sign from the drop-down menu.
either acids each having a different sketcher.Separating several items using the drop-down menu's symbol is OH - H1 - I + H2O .
What three sorts of acids are there?Acids can often be split into three main categories.The first is binary acid, followed by oxyacid and carboxylic acid.All binary acids are represented by the symbol "H-A," which stands for a hydrogen connection to a nonmetal atom.
Why does water not function as an acid or a base?In water, hydrogen ions (OH-) combine with other molecules of water to generate hydronium ions, often known as hydrogen ions or simply H3O+ ions.The equilibrium between these hydroxyl & hydronium ions prevents the solution from being either acidic or alkaline.
to know more about either acids visit:
https://brainly.com/question/9415178
#SPJ4
identify the net ionic equation for the reaction that occurs when solutions of agno3 and nh4cl are mixed.
A system has reached chemical equilibrium: Which is true of the system? -there is no net. change in the concentration of reactants or products -the molecules have stopped combining and decomposing -the system is open there is no change taking place-All of the above are true
Neither the reactant nor product concentrations change overall. -The molecules are no longer fusing together or breaking down.
The amount of solute (the material being dissolved) per unit volume of solvent is known as the concentration of a substance in a solution (the substance in which the solute is dissolved). Using measures like molarity, molality, and mole fraction, concentration is a measurement of the amount of solute in a solution.The rate of a reaction and the final result of a chemical reaction can both be significantly impacted by variations in the concentration of the reactants and products. Understanding concentration is crucial for comprehending how solutions behave and how chemical reactions turn out. Additionally, adjustments to concentration can be made to regulate the rate of reactions, for as by varying the quantity of reactants added.
Learn more about concentration here:
https://brainly.com/question/10720472
#SPJ4
: Balance the following equations:
Nal +
F₂ —>
NaF +
+
I₂
The balanced equation of the given reaction is given below:
2 NaI + F₂ -----> 2 NaF + I₂What is a balanced equation of a chemical reaction?An equation for a chemical reaction is said to be balanced if both the reactants and the products have the same total charge and the same number of atoms for each component in the reaction. In other words, both sides of the reaction have an equal balance of mass and charge.
Numerical coefficients are placed in the front of the formula of the compound and elements until the mole of atoms is balanced on both sides of the equation.
The balanced equation of the given reaction is obtained by placing 2 in front of NaI and NaF.
Learn more about balanced chemical equations at: https://brainly.com/question/26694427
#SPJ1
Typical outdoor air also has water vapor, H2O(g), mixed in with the other gases. Consider the molar mass and density of humid air compared to dry air.question: The molar mass of humid air is (less than / equal to / greater than) the molar mass of dry air. question: The density of humid air is (less than / equal to / greater than) the density of dry air
Dry air has a density of 1.3 g/L and a molar mass of 28.96 g/mol at 0 °C and 1.0 atm, respectively.
What in chemistry is a molar mass?Atomic mass M is the mass of a chemical compound divided by the molecular weight of the material. The formula for this is MB = m/nB, where m is the total mass of a sample of a pure substance and nB is the molecular weight of substance B.
Dry air contains 78% N2, 21% O2 and 1% Ar
Molar mass N2 = 28 g/mol
Molar mass O2 = 32 g/mol
Molar mass Ar = 39.95 g/mol
Calculate molar mass
Molar mass = 0.78 * 28 + 0.21*32 + 0.01 * 39.95
Molar mass = 28.96 g/mol
Calculate the density
At STP Molar volume is 22.4 mol/L
Density = molar mass / molar volume
Density = 28.96 / 22.4
Density = 1.3 g/L
To know more about molar mass visit:-
https://brainly.com/question/14588707
#SPJ4
Question:
Map Sapling Learning Dry air (0% humidity) is approximately 78% N2, 21% O2, and 1% Ar by moles. Calculate the molar mass and density of dry air at 0 °C and 1.0 atm. Assume ideal behavior and use two significant figures in your answers Number Number g/ mol molar mass density Typical outdoor air also has water vapor, H20 (g), mixed in with the other gases. Consider the molar mass and density of humid air compared to dry air E the molar mass of dry air The molar mass of humid air is Select answer The density of humid air is Select answer the density of dry air. greater than equal to less than O Previous Next Check Answer Give Up & View Solution
Identify which of these molecules has the highest boiling point and give the reasoning why in terms of intermolecular force. CHCl3, H2O, CO2
According to the forces of attraction, water has highest boiling point as it possesses hydrogen bonding.
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/23841038
#SPJ1
given 8.22 grams of CH4, how many grams of H2O are required?Please look at screenshot.
According to the stoichiometry of the given balanced chemical equation, 18.02 g of water are required for 1 mole of methane and 2 moles of water.
What is stoichiometry?It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.
In the given chemical equation 1 mole of methane gives 2 moles of water, that is, 16 g methane gives 36 g water, thus, 8.22 g will give 8.22×36/16= 18.02 g of water are required.
Thus, 18.02 g of water are required for 1 mole of methane and 2 moles of water.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ1
If HCl is added to a beaker of water
Does this make an acid, base, or neutral?
Why?
What range on the pH scale would this measure?
If HCl is added to a beaker of water, HCl will dissociate into ions and show acidic character. pH will be in the range of 0-7.
What is acid?Any material that when dissolved in water has an acidic taste, may alter the color of some indicators (such as reddening blue litmus paper), can react with some metals (such as iron) to release hydrogen, can combine with bases to produce salts, and can accelerate some chemical reactions.
Acids are examples of both organic chemicals that belong towards the carboxylic acid, sulfonate, as well as phenol groups as well as the inorganic substances classified as the mineral acids, such as sulfuric, nitric, hydrochloric, as well as phosphoric acids. If HCl is added to a beaker of water, HCl will dissociate into ions and show acidic character. pH will be in the range of 0-7.
Therefore, HCl will dissociate into ions and show acidic character. pH will be in the range of 0-7.
To know more about acid, here:
https://brainly.com/question/29775793
#SPJ1
Specify whether each of the items listed is hydrophilic or hydrophobic Triglycerides Carbohydrates Oil Cholesterol Glucose lons Polar compounds Water Lipids
Triglycerides, Oil, Cholesterol, and Lipids will come under hydrophobic. Carbohydrates, Glucose, Ions, Polar compounds, and water will come under hydrophilic.
Hydrophilic and hydrophobic are terms used to portray the interaction of molecules with water.
Hydrophilic molecules are those that are attracted to water and will generally dissolve in it. These molecules have polar nature, meaning they have a lopsided distribution of electrons, which permits them to frame hydrogen bonds with water molecules.
Hydrophobic molecules are those that repulse water and don't dissolve in it. These molecules have a nonpolar nature, meaning they have an even dispersion of electrons, which doesn't permit them to shape hydrogen bonds with water molecules.
To learn more about hydrophobic and hydrophilic:
https://brainly.com/question/18522370
#SPJ4
if the initial pressure is 0.20 atm and the dinoitrogen pentaoxide decomposes completely. what is the final pressure?
The final pressure would depend on the number of moles of nitrogen dioxide and the volume of the container it is in, as well as any other gases that may be present. The final pressure nitrogen dioxide is 20 atm.
About Nitrogen DioxideNitrogen dioxide is a chemical compound with the formula NO₂. One of several nitrogen oxides, NO₂ is used as a synthetic material for the manufacture of nitric acid, which produces millions of tonnes annually. Nitrogen dioxide (NO 2 ) is a major contributor to smog formation and a precursor to many harmful secondary pollutants, including ozone and particulate matter. It is highly reactive with other chemicals and is a strong oxidizing agent. Nitrogen dioxide is a dark red-orange gas.
Learn More About Nitrogen Dioxide at brainly.com/question/30459594
#SPJ4
When deciding which side of a biomolecule would orient itself toward the water in cytoplasm, the___groups would be directed toward the water molecules.
Biomolecules would point their hydrophilic (water-loving) groups in the direction of the water molecules in the cytoplasm. Amino, carboxyl, phosphate, and sulfurate groups are examples of hydrophilic groups.
One of a chemical substance's smallest units, a molecule possesses all of that substance's chemical characteristics. It consists of atoms that are chemically joined together in groups of two or more. An individual molecule's chemical characteristics are determined by the kind and configuration of its atoms. H2O, C6H12O6, and oxygen are a few examples of molecules that are frequently used (O2). Small gas molecules like oxygen and nitrogen, as well as massive macromolecules like proteins and DNA, are only a few examples of the wide variety of sizes of molecules. The principles of physics and chemistry control the behaviour of molecules, including their interactions with other molecules, their capacity to absorb or release energy, and their reactivity with other substances. It's critical in domains like these to comprehend the characteristics and behaviour of molecules.
Learn more about molecule here:
https://brainly.com/question/19922822
#SPJ4
a cation and an anion have approximately the same ionic radius and combine in a 1:1 ratio. given this information, these two ions will most likely crystallize in a crystal structure similar to that of .
Cation and anion will likely crystallize in a crystal structure similar to that of an ionic compound. Ionic compounds typically have a repeating pattern of positively charged cations and negatively charged anions in a crystal lattice, with each cation surrounded by anions and vice versa. When cations and anions have similar ionic radii, it is likely that they will form an ionic crystal structure.
Ionic compounds are formed by the combination of a positively charged cation and a negatively charged anion. If a cation and anion have approximately the same ionic radius and combine in a 1:1 ratio, it is likely that they will crystallize in a crystal structure similar to that of a typical ionic compound. The crystal structure of an ionic compound is defined by the arrangement of ions in a repeating pattern. When cations and anions are of similar size and combine in a 1:1 ratio, the resulting crystal structure is typically an ordered arrangement of alternating cations and anions. This arrangement results in strong ionic bonds between the cation and anion, leading to a highly stable crystal structure.
Learn more about ions here: brainly.com/question/14982375
#SPJ4
How many years are there in 1.10 s?
Express your answer using three significant figures.?
Answer:
Below
Explanation:
Number of seconds in one year
3600 s/hr * 24hr/day * 365.25 day/yr = 31 557 600 s/yr
1.10 s / 31 557 600 s/yr = 3.49 x 10^-8 yr
3 Cu + 8HNO3 --> 3 Cu(NO3)2 + 2 NO + 4 H2O In the above equation how many moles of water can be made when 103.5 grams of HNO3 are consumed?
Taking into account the reaction stoichiometry, 0.82 moles of water can be made when 103.5 grams of HNO₃ are consumed.
Reaction stoichiometryIn first place, the balanced reaction is:
3 Cu + 8 HNO₃ → 3 Cu(NO₃)₂ + 2 NO + 4 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
Cu: 3 molesHNO₃: 8 molesCu(NO₃)₂: 3 molesNO: 2 molesH₂O: 4 molesThe molar mass of the compounds is:
Cu: 63.54 g/moleHNO₃: 63 g/moleCu(NO₃)₂: 187.54 g/moleNO: 30 g/moleH₂O: 18 g/moleBy reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
Cu: 3 moles ×63.54 g/mole= 190.62 gramsHNO₃: 8 moles ×63 g/mole= 504 gramsCu(NO₃)₂: 3 moles ×187.54 g/mole= 562.62 gramsNO: 2 moles ×30 g/mole= 60 gramsH₂O: 4 moles ×18 g/mole= 72 gramsMass of water formedThe following rule of three can be applied: if by reaction stoichiometry 504 grams of HNO₃ form 4 moles of H₂O, 103.5 grams of HNO₃ form how many moles of H₂O?
moles of H₂O= (103.5 grams of HNO₃×4 moles of H₂O)÷504 grams of HNO₃
moles of H₂O= 0.82 moles
Finally, 0.82 moles of H₂O are made.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
#SPJ1
A series of experiments were performed to determine the density of an unknown sample. The volume (mL) was plotted in the x-axis and the mass (g) was plotted in the y-axis. The linear regression line of best fit was calculated to be and the slope has units of g/mL: y = 0.103x + -0.017 Using the line of best fit, calculate the mass of the sample, g, that would be present in 23.489 mL of the sample.
Answer:
2.39 g
Explanation:
To calculate the mass of the sample at a volume of 23.489 mL, we can use the equation of the line of best fit:
y = 0.103x + -0.017
where y is the mass in grams and x is the volume in mL.
So, for a volume of 23.489 mL:
mass = 0.103 * 23.489 + -0.017
mass = 2.39 g
Therefore, the mass of the sample in 23.489 mL would be approximately 2.39 g.
Which of the following reactants is balanced
Answer:
What are the reactants
Explanation:
Developers are writing code and merging it into shared repositories several times a day, where it is tested automatically. Which of the following concepts does this BEST represent?
Functional testing
Storge procedures
Elasticity
Continuous integration
Hence option Continuous integration is correct choice.
This BEST represents the concept of Continuous Integration (CI).
A Dev Ops software development method called continuous integration (CI) enables developers to integrate code changes into a single repository for automated builds and tests. The build and unit test phases of the software release process are referred to as continuous integration. Every revision that is committed starts a build and test cycle. Code updates are automatically created, tested, and readied for deployment to production via continuous delivery.
What steps are taken in a continuous code cycle?
Continuous integration, continuous delivery, continuous deployment, and continuous testing are all components of ongoing development. The technique of continually adding new code commits to your source code is known as continuous integration.
Which four stages comprise the programming cycle?
Cycle of Program Development (PDLC) a procedure that contains five stages for developing a programme. analysis, design, development, testing, implementation, and maintenance of application software.
For such more question on Continuous Integration
https://brainly.com/question/29245233
#SPJ4
Compound A has the molecular formula C14H25Br and was obtained by the reaction of sodium acetylide with 1,12-dibromododecane. On treatment of compound A with sodium amide, compound B (C14H24) was obtained. Ozonolysis of compound B gave the diacid HO2C(CH2)12CO2H. Catalytic hydrogenation of compound B over Lindlar palladium gave compound C (C14H26), and hydrogenation over platinum gave compound D (C14H28). Further, C yielded O=CH(CH2)12CH=O on ozonolysis. Assign structures to compounds A through D so as to be consistent with the observed transformations.
The structures of the compounnds A and D are shown in the image attached.
What is ozonolysis?
Ozonolysis is a chemical reaction in which ozone (O3) is used to cleave carbon-carbon double bonds in organic compounds. The reaction typically results in the formation of carbonyl compounds (such as aldehydes or ketones) and the cleavage of the original molecule into two smaller fragments.
Ozonolysis is often used in organic synthesis as a tool for the functional group analysis of complex molecules. The reaction mechanism involves the attack of ozone on the double bond, followed by the formation of a highly reactive intermediate, which undergoes further reactions to produce the final products.
Learn more about ozonolysis:https://brainly.com/question/30325381
#SPJ1