A solution is prepared by adding 1.43 mol of kcl to 889 g of water. the concentration of kcl is ________ molal.

Answer:

48 km/hr

Explanation:

These are often calculated incorrectly because TIME is ignored

time = distance / rate

               uphill =  d / 40       downhill = d/60

average rate =   distance / time

                      =   2d / ( d/40 + d/60)              2d is uphill + downhill

                        = 2 / ( 1/40 + 1/60 ) =   48 km/hr

a) Yes, there is one outlier (lower).

b) The boxplot can be seen with the image as attached below.

Looking at the distribution of the lower/smallest observation, we can see that there is a value in the lower/smallest that is very far from others. See the attached diagram of the boxplot to understand it better.

The median is the line in the middle of the boxplot.

The Lower fourth is the lower whisker line and upper fourth is the upper whisker line. The lower box (just below the median) line is the 1st quartile, and the upper box line (just above the median) is 3rd quartile.

To know more about random sample size, visit:

https://brainly.com/question/14785572

#SPJ4

Complete Question

A sample of 20 glass bottles of a particular type was selected, and the internal pressure strength of each bottle was determined. consider the following partial sample information.

median = 202.1

lower fourth= 196.0

upper fourth= 216.8

three smallest observation 125.8 188.1 193.7

three largest observations 221.3 230.5 250.2

a. Are there any outliers in the sample? Any extreme outliers?

b. Construct a boxplot that shows outliers, and comment on any interesting features

Answer:

The stopping distance is 62.5m for a car traveling at vxvxv_x = 25 m/sm/s and the driver applies the brakes and the car decelerates at axaxa_x = -5.0 m/s2m/s2.

Explanation:

Acceleration occurring in the opposite direction of an object’s the motion, is negative or referred to as deceleration. The formula below (stopping distance) solely compares the magnitudes of distance travelled, beginning velocity, and deceleration.

We use the fourth equation of motion, v2 = u2 +2ax. When the car stops, we have v = 0, and so

0 = u2 +2ax.

Solving for x, we have

x =−u2/2a

Given the following information from the question

U= 25 ms-1

-a = 5.0 ms-2

x = -(25)2 / 2* 5

x =625/10

x = 62.5 m

Hence the car travels 62.5m as the brake is applied to come to a halt.

To learn more about deceleration. Click on https://brainly.com/question/75351

#SPJ4

The following question can be solved using formulas of Motion on one dimension as there is no updrift or downdrift

We will use the formula

[tex]v^{2}-u^2=2aS[/tex]

where v is the final velocity

u is the initial velocity

a is the acceleration of the boat

s is the distance in meters

u=0 as the initially the boat is at rest

S=12meter

acceleration is 5 m/s^2

[tex]v^{2}=[/tex]2 x 5 x 12

v^2=120

therefore final velocity is [tex]\sqrt{120}[/tex]=10.95m/s

Now using the formula v=u+at

v=[tex]\sqrt{120}[/tex]

[tex]\sqrt{120}[/tex]=0+5 x t

t= [tex]\sqrt{ 120[/tex]/5

t = 2.20 seconds

t is the time taken

Hence the boat takes 2.20seconds

For further reference:

https://brainly.com/question/9909784?referrer=searchResults

#SPJ9

Answer:

0.7 g/cm^3

Explanation:

Density = Mass / Volume

             = 84g / 120 cm^3

             = 0.7 g / cm^3

A steel cable is moving an elevator up an elevator shaft at a consistent speed. The consequences of friction are all insignificant. In this case, the forces acting on the elevator are such that the cable's upward force is equal to the force of gravity pulling downward.

Learn more about the Newton 2nd law with the help of the given link:

https://brainly.com/question/27573481

#SPJ4

After oxygen has been administered, the next priority intervention the nurse would initiate for a patient with a pulmonary embolus is the administration of IV Heparin.

Heparin is a prescription medicine used to treat and prevent symptoms of blood clots caused by medical conditions or medical procedures. Heparin may be used alone or with the other medications. Heparin belongs to a class of drugs called the Anticoagulants, Cardiovascular, Anticoagulants, Hematologic.

Heparin may cause serious side effects including:

skin warmth or discoloration,

chest pain,

irregular heartbeats,

shortness of breath,

dizziness,

anxiety,

sweating,

unusual bleeding or bruising,

severe pain or swelling in your stomach, lower back/growing

dark or blue-colored skin on your hands/feet,

nausea,

vomiting,

loss of appetite,

unusual tiredness,

bleeding that will not stop,

nosebleed,

blood in the urine or stool,

black or tarry stools,

coughing up blood or vomit that looks like the coffee grounds,

skin changes where the medication was injected,

fever,

chills,

runny nose,

watery eyes,

easy bruising,

purple or red spots under your skin,

sudden numbness or weakness,

problems with vision or speech, and

swelling or redness in an arm or leg

To know more about cardiovascular visit: https://brainly.com/question/14349574

#SPJ4

The Floating weight is affected by the buoyancy force.

As we clearly know that in buoyancy force the weight or any other object will float over the surface of the water and this force is known as buoyancy force. The reason behind the Buoyancy force is that the object seeming lighter in water.

The Buoyancy force can be define as the upward force exerted by the fluid on any weight or any object placed in it. The Buoyancy force is directly proportional to the density of the immersed fluid. The Buoyancy force is also proportional to the volume of the object immersed in the fluid.

So we can conclude that the floating weight is affected by the buoyancy force.

Learn more about Buoyancy Force here: https://brainly.com/question/12788506

#SPJ1

The intersection of the sphere with the yz- plane will be (y -z)² + (z- 5)² =7

A sphere is can be define as , a geometrical object that has a three-dimensional analogue to a two-dimensional circle. In a very simple word, i.e. a sphere is the set of points that are all at the same distance r from a given point in three-dimensional space.

We are given that ,

The center of sphere = (h, k, l) = (-3,2,5)

The radius of sphere = (r) = 4

Then the formula of the equation of sphere with radius r and center (h, k, l) is given as,

(x- h)² +(y - k)² + ( z -l)² = r²

So that putting the value of center of sphere (h, k, l) and radius (r) in above equation then we get,

(x- (-3))² +(y - 2)² + ( z -5)² = 4²

(x +3 )² +( y - 2)² + ( z -5)² = 16

Therefore, we can write the equation of intersection of the sphere with the yz- plane and putting (x = 0) in above equation then,

(0 +3 )² +( y - 2)² + ( z -5)² = 16

( y - 2)² + ( z -5)² = 16 - 9

( y - 2)² + ( z -5)² = 7

The intersection of the sphere with the yz- plane is, (y -z)² + (z- 5)² =7

To know more about sphere

https://brainly.com/question/8329830

#SPJ4

k is the number of standard deviations greater than one that that proportion of observations will be discovered within.

A standard deviation measures the spread of data in relation to the mean.

A low standard deviation suggests that the data is concentrated around the mean, whereas a high standard deviation shows that the data is spread.

A standard deviation near 0 suggests that data points are close to the mean, whereas a high or low standard deviation indicates that data points are above or below the mean, respectively.

The curve on top of Image 7 is more spread out and hence has a higher standard deviation, whereas the curve below is more grouped around the mean and thus has a smaller standard deviation.

To learn more about standard deviation, visit:

https://brainly.com/question/16555520

#SPJ4

The ball will take 0.45 seconds to reach the ground

We will use Newton’s laws of motion, so

H= [tex](1/2)gt^2[/tex] taking height= 1m

[tex]1= (1/2) x 9.8 x t^2[/tex]

[tex]t=\sqrt{10/49} = 0.45 seconds[/tex]

The 3 laws of motion given by Newton are as follows:

1) Unless an unbalanced force acts upon it, an item at rest remains at rest, and an object in motion continues to move in a straight line at a constant pace.

2) An object's acceleration is influenced by its mass and the force being applied.

3) Whenever one thing applies force to another, the second object applies the opposing, equal force to the first.

To know more about Newton's laws of motion visit:

https://brainly.com/question/27915475

#SPJ4

Charge enter a length of the axon during this process is 1.2544C

CHARGE : It is a physical property of matter that causes it to experience a first, then it placed in between the electromagnetic field.

During the inflow part of a cycle in the neurons approximately

5.6× 10¹¹Na ions per meter,

each with a charge of +e enter the axon.

Therefore, ions will be (5.6 ×10¹¹) × (1.4/100)

                                 =  7.84 × 10⁸  Na ions

Charge of an electron is 1.6 × 10⁻¹⁹Coulombs

Thus; 7.84 ×10⁸ ×1.6 ×10⁻¹⁹

= 1.2544×10⁻¹⁰ coulombs

Charge enter a length of the axon during this process is 1.2544C

The given question is incomplete the complete question is  

How many coulombs of charge enter a 1.4 cm length of the axon during this process?

To know more about charge

https://brainly.com/question/2805673

#SPJ4

Option a) True, the energy associated with swinging a bat is a type of kinetic energy.

In the terms of physics, the energy that a body or a particle possesses due to its motion is said to the kinetic motion.

It is also defined as the work that is required in order to accelerate a body from rest to the stated velocity.

If work is done on an object by applying a net force on the body of that object, the speed of the object changes and it thereby gains kinetic energy.

The body after gaining this energy tries to maintain it until and unless its speed changes.

To know more about kinetic energy, visit:

https://brainly.com/question/12669551

#SPJ4

When there is a high energy demand, frequent variations in the energy demand, and a deficiency in oxygen, lactic acid is created and builds up in the muscle.

Muscle pH drops to between 6.4 and 6.6 during prolonged, severe exercise. The high H+ ion concentration does not seem to be the main factor limiting force creation; instead, the PCr level appears to be more important. High H+ concentrations can inhibit phosphofructokinase, although the inhibition can be effectively overcome by increases in the activators AMP and ADP. High H+ concentrations reduce PCr by directly affecting the equilibrium of creatine kinase and indirectly by raising ADP.

Learn more about concentration here-

https://brainly.com/question/10725862

#SPJ4

Prima facie means the evidence is valid on its face, or based on the evidence, and the elements.

Prima facie, a Latin phrase that means "at first glance" or "based on first impression," The feminine versions of primus, which means "first," and facies, which means "face," both in the ablative case, would be translated literally as "at first face" or "at first appearance." "On the face of it" is a typical translation in contemporary, colloquial, and conversational English.

Prima facie refers to the initial appearance of enough supporting evidence to establish a case, and it is used in modern legal English (both in civil law and criminal law). Prima facie evidence is a term used in common law regimes to describe evidence that, absent rebuttal, would be sufficient to establish a certain claim or fact. In academic philosophy, the phrase is used similarly.

To learn more about prima facie, visit:

https://brainly.com/question/7228477

#SPJ4

The correct answer for the address of the fourth element will be 2225.

The fourth element will be data -.

So if the data[0] element starts at 2222, and each char element takes 1 byte, then

data[0] starts at 2222

data[1] starts at 2223

data[2] starts at 2224

data[3] starts at 2225

Answer: 2225

A linear data structure that collects elements of the same data type and stores them in contiguous and adjacent memory locations is known as an array. Arrays use an index system that ranges from 0 to (n-1), where n is the array's size.

The array data type is a compound data type represented in the database dictionary by the number 8. Arrays are collections of elements of the same data type that are accessed via an index (attribute) number. The terms array, list, vector, and sequence are all synonymous

Learn more about array data here :-

https://brainly.com/question/23611240

#SPJ4

The Patagonia region of Chile and Argentina features a large, elongated glacier approximately 90 km (56 mi) wide and 360 km (224 mi) long. this is an example of a(n): Ice field

The Patagonia region of Chile and Argentina is characterized by the largest ice fields in South America.

An ice field is a large mass of ice that covers part of the land.

The Patagonia is an area located in South America which is shared by Chile and Argentina.

Learn more about the Patagonia at: brainly.com/question/4206237

#SPJ4

A football is thrown on a long pass. compared to the ball's initial vertical velocity, the vertical component of its velocity at the highest point is less

Velocity is defined as a vector measurement of the rate and the direction of motion, simply, velocity is the speed at which something moves in one direction. The speed of a car traveling north on a major freeway and the speed a rocket launching into the space can both be measured using velocity.

The SI units for the velocity are m/s (meters per second), but velocity may also be expressed in any units of distance per time, and the other units include miles per hour (mph), kilometers per hour (k/h), and kilometers per second (km/s).

At highest point the velocity of football is 0 as it is neither moving up or moving down for a moment so it is less than initial velocity. Magnitude of initial and final velocity is maximum in projectile motion.

To know more about speed visit: https://brainly.com/question/28224010

#SPJ4

A charge q is located at the origin (0,0). the electric field at (x,y) is given (in terms of its components) by E1i^+E2j^+E3k^.

The size of the electric field produced by a point charge Q is determined by this equation. The distance r in the denominator is the separation between the point of interest and the point charge, Q, or the center of a spherical charge. Positive charge is moving in the opposite direction, toward a negative charge. Q1 will produce an E-field vector that points left at the origin, and Q2 will produce an E-field vector that points right. The electric force F, or Coulomb force, exerted per unit positive electric charge q at that place can be used to determine an electric field's strength, or E = F/q.

Learn more about electric field here-

https://brainly.com/question/15800304

#SPJ4

When the total debt ratio is 0.36, the debt-equity ratio is 0.5625.

The debt-to-equity ratio is a financial metric that shows how much debt and shareholder equity were utilized to finance the assets of a company. The ratio, often known as risk, gearing, or leverage, is closely related to leveraging. The debt-equity ratio serves as a gauge for how equally creditors and owners or shareholders contributed to the capital used by the company. The debt-equity ratio is the simple ratio of all long-term debt and equity capital in the company. The debt-to-equity ratio is calculated by dividing a company's total liabilities by the sum of its shareholders' equity. For the majority of businesses and industries, a desirable debt-to-equity ratio is around 2.0. A high debt-to-equity ratio shows that a business is using more market capital to finance its operations, whereas a low debt-to-equity ratio shows that the business is making better use of its assets and using less market capital. The debt-to-equity ratio is often higher in the capital industries.

Total Debt ratio = Debt/Asset

Hence, Debt=0.36*Total Assets

Assets = Debt*Equity

Hence Equity=(1-0.36)*Total Assets=0.64*Total Assets

So, Debt-Equity Ratio=Debt/Equity

=0.36Total assets/0.64Total assets

=0.5625

⇒Debt-Equity Ratio=0.5625

To know more about debt-to-equity ratio, click here:

https://brainly.com/question/17154512

#SPJ4

According to the given statement The current in the primary coil is 8 A.

Coil that is a component of an electrical circuit and which, when its current changes, causes a current to flow through a nearby circuit. primary and primary winding are synonyms kind of coil. Device that adds inductance to a circuit and is made of of a spiral of insulated wire.

AC electricity enters the primary coil here Where the current is induced to carry out any sort of energy transfer is in the secondary coil. In this instance, a light bulb is lit by the current. Transformers come in a variety of designs.

Here,

Number of turns in the primary , np = 100 turns

Number of turns in the secondary , ns = 400 turns

Current in the secondary , Is = 2 A

let the current in the primary coil be Ip

Ip * nP = Is * ns

100*np = 400*2

np = 8 A

The current in the primary coil is 8 A.

To know more about Primary Coil visit:

https://brainly.com/question/12000388

#SPJ4

The runner that runs in a 5.00 km race at a steady 3.0 m/s takes 27.78 min to finish the race

The formula and procedure we will use to solve this problem is:

v = x/t

Where:

Information about the problem:

By converting the distance units from (km) to (m) we have:

5.00 km * (1000 m / 1 km) = 5000 m

Applying the velocity formula and isolating the time, we get:

v = x/t

t = x/v

t = 5000 m / 3.0 m/s

t = 1666.67 s

By converting the time units from (s) to (min) we have:

1666.67 s * (1 min / 60 s) = 27.78 min

It is a physical quantity that indicates the displacement of a mobile per unit of time, it is expressed in units of distance per time, for example (miles/h, km/h).

Learn more about velocity at: brainly.com/question/3004254

#SPJ4

Answer:

Physics is a scientific discipline that seeks to construct and experimentally test theories of the physical universe. These theories vary in their scope and can be organized into several distinct branches.

MECHANICS :

Mechanics is the branch of physics that deals with the motion of an object without or with the reference of force. Mechanics can be further divided into two branches, namely quantum mechanics and classical mechanics. Quantum mechanics deals with the behaviour of the smallest particles like neutrons, protons, and electrons, while classical mechanics is the branch that deals with laws of motion of forces and physical objects.

OPTICS :

This branch of physics deals with the behaviour, propagation, and properties of light. Optics can be simply described as the study of the behaviour of infrared light, visible light, and ultraviolet.

THERMODYNAMICS:

Thermodynamics deals with the study of heat and its relation with work and energy. Thermodynamics also deals with the transmission of heat energy by means of convection, conduction, and radiation.

ELECTROMAGNETISM:

Electromagnetism deals with the study of electromagnetic force like electric fields, light, magnetic fields, etc. There are two aspects of electromagnetism which are “electricity” and “magnetism”.

RELATIVITY:

This branch of physics deals with the theorem that was formulated by Albert Einstein. The theory of relativity states that space and time are relative and all the motion must be relative to a frame of reference.

ACOUSTICS :

Acoustics deals with the study of sound and its transmission, production, and effects. Acoustics mainly involves the mechanical waves in gases, liquids, and solids, which include vibration, sound, ultrasound, and infrasound.

In the worst case, a linear search locates a value in an array of length n in O(N) steps.

Learn more about the Linear search algorithm with the help of the given link:

https://brainly.com/question/28319213

#SPJ4

2 in is the value of t (in τ = VQ/It) for determining the maximum horizontal shear stress.

Txy = Tyx causes the beam's horizontal shear force, which tends to cause the fibers to slide.

learn more about horizontal shear stress here

https://brainly.com/question/22683931

#SPJ4

According to the given statement  the pulse pressure = 70mm Hg.

The correct option is 2.

Systolic, as well as diastolic blood pressure, as well as diastolic blood pressure, is divided to create pulse pressure. Mercury millimeters are used to measure it (mmHg).It represents the contractional force of the beating heart. Normal rested blood pressure is about 120/80 mmHg, which results in a pulse pressure of about 40 mmHg.

Diastolic blood pressure is subtracted from systolic blood pressure to determine pulse pressure. Age-related changes in the aorta and minor arteries' compliance result in elevated systolic pressure and decreased diastolic pressure, which raises pulse pressure.

Diastolic and systolic blood pressure differences are used to compute pulse pressure.

So, 150 - 80

= 70.

According to the given statement  the pulse pressure = 70mm Hg

To know more about blood pressure visit:

https://brainly.com/question/4215574

#SPJ4

I understand that the question you are looking for is:

A nurse is calculating the pulse pressure for a client who has a blood pressure of 150/80. What is the pulse pressure?

1. 230 mm Hg

2. 70 mm Hg

3. 1.875 mm Hg

4. 140 mm Hg

2. 70 mm Hg

Tyndall and cohn's experiments in the 1870s showed the presence of a heat-resistant form of bacteria called an endospores.

These are bacteria that thrive in temperatures above 131 degrees Fahrenheit (55 Celsius).

Ferdinand Cohn discovered the heat-resistant endospores of bacilli, and was active in applied microbiology.

Thus, Tyndall and cohn's experiments in the 1870s showed the presence of a heat-resistant form of bacteria called an endospores.

Learn more about heat resistance bacteria here: https://brainly.com/question/13658444

#SPJ1

The minimum speed the ball must be served so as to clear the net is 25.69 m / s

We know that,

Speed = Distance / Time

In order to calculate the time, we can use one of the equations of motion,

y = [tex]y_{0}[/tex] + [tex]v_{0}[/tex]t + 1/2 a[tex]t^{2}[/tex]

where,

y = Initial height

[tex]y_{0}[/tex] = Final height

[tex]v_{0}[/tex] = Initial velocity

a = Acceleration due to gravity

t = Time

Given that,

y = 2.7 m

[tex]y_{0}[/tex] = 1.08 m

[tex]v_{0}[/tex] = 0

a = -9.81 m / [tex]s^{2}[/tex] (Due to gravity)

Distance = 14.9 m

y = [tex]y_{0}[/tex] + [tex]v_{0}[/tex]t + 1/2 a[tex]t^{2}[/tex]

2.7 = 1.08 + 0 + 1/2  * ( -9.81 ) * [tex]t^{2}[/tex]

[tex]t^{2}[/tex] = 1.62 / ( - 4.9 ) = 0.33

t = 0.58 s

Speed = 14.9 / 0.58

Speed = 25.69 m / s

Velocity (speed) is the rate of change of distance with respect to time. It is denoted as V.

Therefore, the minimum speed the ball must be served so as to clear the net is 25.69 m / s

To know more about Velocity

https://brainly.com/question/18084516

#SPJ4

The air pressure inside the balloon is: 0.1432 Pa

The formulas and procedures that we will use to solve this problem are:

Where:

Information about the problem:

Using the formula of the sphere area we get:

a = 4 * π * r²

a = 4 * 3.1416 * (5.0 m)²

a = 314.16 m²

Applying the pressure formula we get:

P = F/a

P = 45 N/314.16 m²

P = 0.1432 Pa

It is a physical quantity that expresses the force applied on the area of a surface.

Learn more about pressure at: brainly.com/question/26269477

#SPJ4