A battery is a device that converts chemical energy to electric energy.
Battery acid contains what substances?Battery acid does not have a set formula, but it is commonly only made of sulphuric acid (H2SO4) and water (H2O), with a concentration of 4-5 mol/L and an approximate pH level of 0.8. Lead-acid batteries utilise sulfuric acid.
What governs a battery's operation?An instrument that stores energy stored and transforms it into electrical energy is a battery. Electrons move from one materials (electrode) to another through an external circuit throughout chemical reactions in batteries. An electric current can be generated by the flow of electrons and utilized to perform tasks.
What kind of battery is it?Principal cells or nonrechargeable batteries. rechargeable batteries or backup cells. batteries depending to use. Calcium ion battery (zinc manganese oxide, carbon) Air and aluminium battery.
Learn more about electric energy here:
brainly.com/question/81250
#SPJ4
a combination of two or more atoms of the same type is called?
A molecule is made up of two maybe more atoms that are chemically linked together, regardless they be of the same component or distinct ones. In the natural world, molecules of oxygen exist.
What is the straightforward meaning of a molecule?Pay attention to how it sounds. a material's smallest unit that contains both its chemistry and physical properties. A molecule is made up of one or more ions.
Water: A Molecule or Not?Molecules are created when atoms come together. Two hydro (H) atoms but one oxygenation (O) atom make up the three atoms that make up a water molecule. As a result, water is sometimes shortened as H2O.There are hundreds of water molecules in a single drop of liquid.
To know more about molecule visit:
https://brainly.com/question/19556990
#SPJ4
twenty grams (20 g) of sodium chloride is placed into a beaker. the mass of both the salt and the beaker is 230 grams. what is the mass of the beaker?
In the case of Twenty grams (20 g) of sodium chloride is placed into a beaker the mass of the beaker is 210 grams.
We may take the combined mass of the beaker and salt and subtract the mass of the sodium chloride to get the beaker's mass. We are aware that 20 grams of sodium chloride are present. The salt and beaker together weigh 230 grams. When the mass of the sodium chloride is subtracted from the total mass, we obtain:
Let's name the beaker's mass "m."
We therefore have:
m + 20 g = 230 g
20 g are subtracted from both sides:
m = 210 g
The beaker, therefore, weighs 210 grams.
Learn more about mass at
https://brainly.com/question/28292684
#SPJ4
how do the electron configurations of the lanthanides and actinides differ from the electron configurations of other transition metals
The f-sublevels of the lanthanide and actinide elements are only partially occupied. Whereas transition metals exists in various oxidation states.
An atom's electron configuration shows how electrons are distributed among its orbital shells and subshells.
The electron configuration typically describes the orbitals of an atom in its ground state, but by compensating for any lost or gained electrons in the orbitals that follow, it can also be used to represent an atom that has ionized into a cation or anion.
Chemical elements that are members of the lanthanide class have valence electrons in the 4f orbitals. Chemical elements that belong to the actinide class have valence electrons in their 5f orbitals. Because they have a large number of shells, inner transition metals are made up of rather hefty atoms.
To know about actinides
https://brainly.com/question/13760918
#SPJ4
mark each statement about carbon as true or false. a. a carbon atom can form up to four covalent bonds. (click to select) b. a carbon atom has six electrons in its outermost shell. (click to select) c. the bond between a carbon and hydrogen atom is a polar bond. (click to select) d. oxygen and nitrogen have a stronger electronegativity than carbon (e.g., a strong pull on a shared electron). (click to select) e. bonds between carbon and other atoms are relatively unstable and readily dissociate, resulting in the formation of new molecules. (click to select) f. the carbon backbone of a molecule is made up of a string of carbon atoms held together with either single or double bonds. (click to select) g. the carbon backbone of a molecule comes in a variety of shapes: linear, ring-like, or highly branched. (click to select) h. carbon is a relatively large atom allowing it to bind to more atoms than smaller atoms would, thereby making it more versatile. (click to select)
a. True
b. False
c. False
d. True
e. False
f. True
g. True
h. False
a. True. A carbon atom can form up to four covalent bonds.
b. False. A carbon atom has four electrons in its outermost shell, not six.
c. False. The bond between a carbon and hydrogen atom is a non-polar covalent bond.
d. True. Oxygen and nitrogen have a higher electronegativity than carbon.
e. False. Bonds between carbon and other atoms are relatively strong and not easily dissociated.
f. True. The carbon backbone of a molecule is often made up of a string of carbon atoms held together with either single or double bonds.
g. True. The carbon backbone of a molecule can come in a variety of shapes, including linear, ring-like, or highly branched.
h. False. Carbon is a relatively small atom, but it has a unique ability to form a variety of bonds with different atoms, allowing it to create an incredible diversity of molecules, which is why it is often referred to as the backbone of organic chemistry.
Learn more about covalent bonds here :
brainly.com/question/19579004
#SPJ4
a mixture of these two compounds, x, reacts with exactly 0.125 mol of dilute hydrochloric acid. what was the mass of calcium oxide in mixtrue x?
To determine the mass of calcium oxide in the mixture "x", we need to know the chemical equation. Assuming that the reaction is CaO + HCl -> CaCl2 + H2O, and using the balanced equation and the amount of hydrochloric acid given (0.125 mol), the amount of calcium oxide in the mixture can be calculated.
About CalciumCalcium or lime is a chemical element with the symbol Ca and atomic number 20. It has an atomic mass of 40.078 amu. Calcium is one of the alkaline earth metals, and is the fifth most abundant element on earth. Calcium is a mineral that is very important for humans, including for the body's metabolism, connecting between nerves, the work of the heart, and muscle movement.
Learn More About Calcium at https://brainly.com/question/26636816
#SPJ4
Find the density of a 50 g irregular solid with a volume 75 milliliters
0.666g/ml is the density of a 50 g irregular solid with a volume 75 milliliters. Another way to state density is in kilograms per cubic meter.
What is density?Density is the mass of a specific material per unit volume. d = M/V, in which d is density, M is weight, and V is volume, is the formula for density. Grams per cubic centimeter are a typical unit of measurement for density.
For instance, whereas Earth has a density of 5.51 milligrams, water has a density of 1 milligrams. Another way to state density is in kilograms per cubic meter (in metre-kilogram-second or SI units).
density=mass/ volume
=50 g /75 milliliters=0.666g/ml
Therefore, 0.666g/ml is the density of a 50 g irregular solid with a volume 75 milliliters.
To know more about density, here:
https://brainly.com/question/13434141
#SPJ1
how would you describe the different types of polymerization techniques and how do they produce different properties of polystyrene?
Emulsion polymerization is a radical polymerization technique that uses a monomer, emulsion-containing water, and a surfactant. Polystyrene for general use is transparent, rigid, and brittle.Per unit weight, it is a reasonably priced resin.
What methods are used to prepare polymers?However, a number of techniques, including desolvation, hemodialysis, ionic gelation, holding the other variables, solvent extraction, salting out, spray drying, and supercritical fluid, are employed to create polymeric nanoparticles.However, a number of considerations must be taken into consideration while choosing a strategy.
What equipment is employed in polymerization?Twin-screw extruders were created primarily to make mixing and compounding procedures easier, but they are also used as polymerization reactors.
To know more about polymerization technique visit:
https://brainly.com/question/28207030
#SPJ4
I need help with this question on this picture please and thank you very much
Answer:
double displacement reaction
decomposition reaction
Answer:
17,c
18,b
Explanation:
decomposition reaction is when the substance or chemical decompose its form to other smaller pieces
the chemical release of _________ plays a role in bonding and forming secure relationships.
A potent hormone known as oxytocin serves the brain as a neurotransmitter. Oxytocin can be released in response to almost every good or bonding interaction.
What results in the energy release from a chemical bond?Exothermic refers to chemical reactions that release energy. When bonds are created in the products of exothermic processes, more energy is produced than is required to break the bonds between the reactants. The temperature of the reaction mixture rises as a result of exothermic reactions.
What kind of chemical bonds does carbon form, and why?Covalent bonds are the most typical kind of bonds that carbon may form. Carbon typically exchanges electrons with other atoms. This is due to the fact that carbon has 4 valence electrons and must either obtain 4 more electrons or lose 4 electrons in order to complete its octet configuration.
to know more about hormones here:
brainly.com/question/29757316
#SPJ4
if you dissolve 0.3 moles of HBr in 1 L of water, what do you expect to be present in the beaker after the compounds have had time to react? O H2Br, OH, and H2O O H30*, Br", and H2O O BrOH and H307 O HBr, H307, Br", and H2O
D) HBr, H307, Br", and H2O components expect to be present in the beaker after the compounds have had time to react.
What do you call HBr in water?Hydrogen bromide (HBr), a diatomic molecule, combines in water to create hydrobromic acid, a caustic acid. HBr has a pH of 0.21. One of the strongest mineral acids is this one. When highly toxic and highly soluble in water gaseous hydrogen bromide is dissolved in the water, an acidic environment and corrosive liquid (HBr) is generated.
Why is HBr water soluble?Because of its capacity to establish intermolecular hydrogen bonds with water, HBr is soluble in water. The difference in electronegativity between H and Br causes a dipole to emerge in HBr.
Learn more about water here:
brainly.com/question/2142660
#SPJ4
if you dissolve 0.3 moles of HBr in 1 L of water, what do you expect to be present in the beaker after the compounds have had time to react?
A)H2Br, OH, and H2O
B) H30*, Br", and H2O
C)BrOH and H307
D) HBr, H307, Br", and H2O
If we reduce the volume in the vessel and the new pressure is measured to be 40 atm, what would the new volume be? a. 10 Lb. 5 Lc. 3.33 Ld. 2.5 L
At a pressure of 40 atm, the gas's new volume will be 2.5 L. As a result, choice (D) is the right one.
Describe Boyle's law.
According to Boyle's law, the pressure a given mass of gas exerts at a given temperature is inversely proportional to the volume that it occupies.
If the temperature remains constant, the relationship between the pressure and volume is inverse.
P ∝ 1/V
or
P₁V₁ = P₂V₂ ................(1) (1)
Given that the gas's starting pressure is P1 = 10 atm
The gas's ultimate pressure, P2, is 40 atm.
The gas's initial volume, V1, is equal to 10 L.
Replace the volume and pressure numbers in equation (1);
(40 atm) V2 = (10 atm) (10 L)
V₂ = 100/4
V₂ = 2.5 L
Consequently, the gas's new volume will be 2.5 L. 40 atm of pressure is increased,
For such more question on Boyle's law
https://brainly.com/question/1357485
#SPJ4
Which Group is in the leftmost column on the periodic table?
A. Halogens
B. Alkali metals
C. Noble gases
D. Alkaline earth metals
The group which is present in the left most column in the periodic table is alkali metals.
What is periodic table?
Periodic table is a tabular arrangement of elements in the form of a table. In the periodic table, elements are arranged according to the modern periodic law which states that the properties of elements are a periodic function of their atomic numbers.
It is called as periodic because properties repeat after regular intervals of atomic numbers . It is a tabular arrangement consisting of seven horizontal rows called periods and eighteen vertical columns called groups.
Learn more about periodic table,here:
https://brainly.com/question/11155928
#SPJ1
how many moles are in 4a.5 x 1022 molecules/atoms of co2?
In 4.5 × 10²² CO₂ molecules, there would be 0.075 moles, based on the supplied assertion.
What impacts the body does CO₂ have?Numerous health impacts from exposure might be experienced. These symptoms can include a coma, hypoxia, convulsions, sweating, a tingling or pins-and-needles sensation, headaches, disorientation, unrest, a tingling or pins-and-needles feeling, and difficulty breathing.
What does having a high level mean?Too much in your blood indicates that the liver is not properly eliminating it (hypercapnia). Blood levels that are higher than usual may indicate a health issue such respiratory or hyperkalemia. Cushing's disease.
moles = particles / Avogadro's number
Plugging in the number of particles and Avogadro's number, we get:
moles = 4.5 × 10²² molecules / 6.022 × 10²³ particles/mole
= 0.075 moles
So, there are 0.075 moles in 4.5 × 10²² molecules.
To know more about CO₂ visit:
brainly.com/question/28870590
#SPJ4
what statement describe a soruce of new gentic vartions species
The statement describe a source of new genetic variations in species is the sexual reproduction results in offspring that each have a unique set of genes. Therefore, option B is correct.
What is genetic variation ?The term genetic variation is defined as the difference in DNA sequences between individuals within a population. The main source of genetic variation is mutation.
New genetic variation originates in a species as a result of sexual reproduction which results in offspring made up of a unique set of genes.
In sexual reproduction, there is an exchange of materials between sexes and the new combination formed a varied form of the original genetic materials.
Thus, option B is correct.
To learn more about the genetic variation, follow the link;
https://brainly.com/question/848479
#SPJ1
Your question is incomplete, most probably your question was
Which statement best describes a source of new genetic variations in a species? A. Asexual reproduction produces many offspring with a successful set of genes.
B. Sexual reproduction results in offspring that each have a unique set of genes.
C. Lifelong leaming helps offspring with the same parents have different skills.
D. Limited resources cause some offspring to survive longer than others,
rx: 30ml of 20% fluoxetine suspension your pharmacy stocks: 40% fluoxetine suspension how many ml of the 40% suspension would be needed for the dilution?
Answer:
15 mL
Explanation:
Using the dilution formula m1v1=m2v2 and substituting values= 20(30)=40v2 and solving via algebra we get 15 mL
a 19.40 mass % aqueous solution of potassium phosphate has a density of 1.05 g/ml. calculate the molality of the solution.
The molality of the 19.40 mass % aqueous solution of potassium phosphate is 1.87 mol/kg.
Molality is defined as the number of moles of solute per kilogram of solvent.
To calculate the molality of a solution, we first need to determine the mass of solute in the solution.
In this case, 19.40 g of solute is present in 100 g of solution, so the mass of solute (m_solute) is 0.1940 x 100 g = 19.40 g.
Next, we need to determine the mass of solvent, which can be calculated from the density (d) and volume (V) of the solution.
The volume of the solution can be calculated from the mass and density as:
V = m / d
Finally, the molality of the solution can be calculated as:
molality = moles of solute / mass of solvent (in kilograms) = (m_solute / Molar mass) / (V / 1000 g/L)
Learn more about Molality here:
https://brainly.com/question/26921570
#SPJ4
before running a titration, you calculate the expected endpoint. however, when performing the experiment, you pass the expected endpoint with no visible color change. what is the most likely problem with the titration set-up? select one: there was an air bubble in the buret tip. the buret tip is leaking titrant into the analyte. the analyte solution is being stirred too quickly. there is not enough indicator in the analyte.
The most likely problem with the titration set-up is an air bubble in the buret tip.
An air bubble in the buret tip can affect the accuracy of a titration by reducing the amount of titrant that is dispensed into the analyte solution. This can result in the appearance of passing the endpoint without a visible color change, as the titrant has not actually reacted with all of the analyte.
To avoid this problem, it is important to gently tap the side of the buret to remove any air bubbles before starting the titration, and to be mindful of air bubbles forming during the titration process. Additionally, checking the accuracy of the buret by performing a calibration before starting the titration can help to ensure that the results are reliable.
To learn more about titration visit: https://brainly.com/question/186765
#SPJ4
why do purines bond with pyrimidines in the dna ladder??
In order to preserve the regular structure of the Plasmid dna or DNA helical helix, purines and pyrimidines must bond. Thymine must bind nutrients to form DNA molecules. Because of this, It is now more stable than RNA.
What is DNA exactly?Deoxyribonucleic acid, also known as DNA, seems to be the molecule that contains the genetic material necessary for an organism's growth and operation. The structure of DNA is a double helix, which is made up of two connected strands that loop around one another to like a twisted ladder.
What is Mtdna and what does it do?The information molecule is DNA. It contains information needed to create proteins, which are other big molecules. Each of your cells contains 46 long proteins genetic code that serve as a distribution point for these instructions.
To know more about DNA visit:
https://brainly.com/question/2377747
#SPJ4
25. The percentage of 'Active Air' which supports burning is about A. 0.3 B. 21.0 C. 25.0 D. 33.3 E. 78.0
The percentage of 'Active Air' which supports burning is about is 21.0. The correct option is B
What is active air?Active air" can be defined as the portion of air that is available for combustion. It typically refers to the concentration of oxygen in the air as oxygen is the essential component for most forms of combustion to occur.
Therefore, The percentage of 'Active Air' which supports burning is about 21.0, or 21%. This refers to the amount of oxygen in the air that is available for combustion as the remaining 79% of the air is made up of nitrogen and other non-combustible gases.
Learn more about active air here : brainly.com/question/9961527
#SPJ1
why are the temperature and pressure dependent properties in the saturated mixture region? (2 points)
Because boiling or condensation in a saturated mixture zone happens at a specific temperature, the pressure and temperature are dependent parameters in this region.
What is the saturated mixture's quality?According to thermodynamics, the mass fraction of vapor in a saturated combination is referred to as the vapor quality; thus, saturated vapor has a quality of 100% and saturated liquid has a quality of 0%.
What is a liquid that is saturated?A liquid that is going to evaporate is a saturated liquid. Water is in the liquid phase at 1 atm and 20 degrees Celsius (compressed liquid). Water is a liquid that is ready to evaporate at 1 atm pressure and 100 degrees Celsius (saturated liquid).
To know more about saturated mixture visit :-
https://brainly.com/question/15114855
#SPJ4
"Note: This Question Regards To Touching Metal." Use the space below or write on a piece of paper. What do you think causes these sparks to form? Write about a time that you saw sparks, and try to identify the conditions that caused the sparks.
Sparks typically form when two objects come into contact with high friction and a high-energy transfer causes ionization of the surrounding air, which results in a spark. The last time I saw sparks were from faulty electrical appliances.
What causes sparks?Some common examples of conditions that may cause sparks include rubbing metal objects together, scraping metal on a rough surface, or using a metal tool near an electrical conductor. The amount of energy transferred and the type of objects involved determine the size, color, and intensity of the spark.
Faulty appliances are the most commonly seen spark experiences or broken wirings. Conditions that might cause these are water touching the open electrical areas or a severed connective wire.
Learn more on sparks here: https://brainly.com/question/14985193
#SPJ1
if 565 j of heat are added to 44 mol of a monatomic gas at constant volume or how much does the temperature of the gas increase?
If 565 j of heat are added to 44 mol of a monatomic gas at constant volume, then the temperature of the gas will increase by approximately 12.7 K or -260.45°C.
To calculate the change in temperature, ΔT, you would need to know the molar heat capacity (Cv) of the gas. However, the value of Cv can vary depending on the specific gas and temperature range. For a monatomic gas, Cv is typically around 3/2R, where R is the ideal gas constant. If we use this approximation, we can calculate ΔT as follows:
ΔT=Q/nCv
ΔT = 565 J / (44 mol × (3/2)R).
ΔT = 565 J / (44 mol × (3/2) × 8.31 J/mol·K)
ΔT = 12.7 K.
Therefore the temperature of the gas will increase by approximately 12.7 K. If you prefer to express the change in temperature in Celsius, you would subtract 273.15 from the value in Kelvin, so ΔT = 12.7 K - 273.15 = -260.45°C
To learn more about monatomic gas visit: https://brainly.com/question/30509804
#SPJ4
was there supercooling? would you expect the water or sugar solution to have the most super cooling why>?
Because the presence of the sugar would produce nucleation spots and enable the development of ice crystals, the sugar solution should be distilled to ensure that Super Cooling happens more effectively than the water solution.
Lowering a liquid or gas's temperature below its freezing point without causing it to solidify is known as supercooling. When a liquid is cooled below its freezing point without solidifying, the process is known as supercooling. In the case of water, ice formation requires a seed crystal or a nucleation location. The temperature of a supercooled liquid increases as freezing progresses because the substance releases its latent heat during the transition from solid to liquid form. The substance becomes hotter as a result of latent heat.
Learn more about crystals from here:
https://brainly.com/question/30049286
#SPJ4
what is the mass percent of oxygen in propionic acid, c3h6o2?
Answer:
43.23%.
Explanation:
The mass percent of oxygen in propionic acid (C3H6O2) can be calculated by dividing the mass of oxygen in the molecule by the total mass of the molecule and multiplying by 100.
First, find the molar mass of propionic acid:
C3H6O2 = 3 x 12.01 + 6 x 1.01 + 2 x 16.00 = 74.08 g/mol
Next, find the mass of oxygen in one mole of propionic acid:
2 x 16.00 g = 32.00 g
Finally, divide the mass of oxygen by the total mass and multiply by 100:
(32.00 g / 74.08 g) x 100% = 43.23%
So, the mass percent of oxygen in propionic acid is 43.23%.
When the temperature of a rigid hollow sphere containing 750 mL of hydrogen gas is held at 67°C, the pressure of the gas is 950.0 mm Hg. How many grams of hydrogen does the sphere contain?
The mass (in grams) of hydrogen gas present in sphere, given that the gas is held at 67 °C is 0.068 g
How do I determine the mass of the hydrogen gas present?First, we shall determine the mole of the hydrogen gas in the sphere. Details below:
Volume (V) = 750 mL = 750 / 1000 = 0.75 LTemperature (T) = 67 °C = 67 + 273 = 340 KPressure (P) = 950 mmHg = 950 / 760 = 1.25 atmGas constant (R) = 0.0821 atm.L/Kmol Number of mole (n) =?PV = nRT
Divide both sides by RT
n = PV / RT
n = (1.25 × 0.75) / (0.0821 × 340)
n = 0.034 moles
Finally, we shall determine the mass of the hydrogen gas present in the sphere. This can be obtained as follow:
Mole of hydrogen gas = 0.034 moles Molar mass of hydrogen gas = 1 × 2 = 2 g/molMass of hydrogen gas =?Mole = mass / molar mass
Cross multiply
Mass = Mole × molar mass
Mass of hydrogen gas = 0.034 × 2
Mass of hydrogen gas = 0.068 g
Thus, the mass of the hydrogen gas is 0.068 g
Learn more about mass:
https://brainly.com/question/6613610
#SPJ1
a flexible container at an initial volume of 3.10 l contains 6.51 mol of gas. more gas is then added to the container until it reaches a final volume of 15.9 l. assuming the pressure and temperature of the gas remain constant, calculate the number of moles of gas added to the container. number of moles of gas:
The number of moles of gas added to the container are 26.88 moles.
A mole is the mass of a substance made up of the same number of fundamental components. A mole fraction shows how many chemical elements are present.
The following formula is used to determine how many moles of a gas should be introduced to the container.
preliminary concentration = 6.51 moles
starting moles - final moles
the final mole calculation
3.10L = 6.51 moles
15.9 L =? moles
by cross multiplication
15.9 L x 6.51 moles/ 3.10 L = 33.39 moles
Consequently, the number of moles added = 33.39 moles -6.51 moles
= 26.88 moles
To learn more about number of moles visit;
https://brainly.com/question/14919968
#SPJ4
what chemical can be used to test for the presence of simple sugar? question 6 options: sudan iv biuret iodine potassium permanganate
What chemical can be used to test for the presence of simple sugars is a solution of Benedict's Solution.
Explanation of Benedict's solutionBenedict's solution is used to test for the presence of reducing sugars in a sample. The principle of the test is the same as the test using Fehling's solution. Benedict is generally used for qualitative analysis of glucose, but can be used for quantitative analysis of glucose by titration. The advantage of Benedict's reagent is that it contains fewer components but is precise and accurate.
Reducing sugars that can be tested are monosaccharides, disaccharides except sucrose. Benedict's solution will test for the presence of aldehyde and ketone groups in aldose and ketose sugars. The reducing sugar test using Benedict's solution is very sensitive so it can detect glucose levels as low as 0.1% in the mixture, so it is very often used for urine and blood samples.
Learn more about Benedict's Solution at: brainly.com/question/12109037
#SPJ4
when single electrons occupy different orbitals of the same sublevel
When single electrons occupy different orbitals of the same sublevel, they all have the same spin.
What are the four electron-holding orbitals?According to current theory, orbitals are where electrons reside. An orbital is an area of space where detecting an electron has a high likelihood. The four fundamental kinds of orbitals are s, p, d, and f. The spherical form of a s orbital can accommodate two electrons.
How many electrons do the KLMN shells contain?The KLMN notations show how many electrons there are overall for each n-bit main quantum number. The atomic number of the neutral chlorine atom is 17. It has 17 electrons inside, which are dispersed throughout its atomic shells. However, we are required to determine the chloride ions' electrical arrangement.
Can all orbitals accommodate two electrons?Two electrons with the opposite spin can fit into any orbital at most. Two electrons are housed in the first shell's one 1s orbital. Eight electrons, two in a 2s orbital and six in three 2p orbitals, are located in the second shell. There are 18 electrons in the third shell, with two in a 3s orbital, six in three 3p orbitals, and ten in five 3d orbitals.
To know more about electron visit;
https://brainly.com/question/13992621
#SPJ4
DNA and RNA bases are also held together by chemical bonds and have specific base pairing rules. In DNA/RNA base pairing, adenine (A) pairs with uracil (U), and cytosine (C) pairs with guanine (G). The conversion of DNA to mRNA occurs when an RNA polymerase makes a complementary mRNA copy of a DNA "template" sequence.
Hydrogen bonds hold base pairs together chemically within a DNA molecule. Complementary base pairing is the term used to describe the constant pairing of bases.
Where can you find hydrogen?The majority of stars and the sun include it, and the world Jupiter is primarily made of it. The most oxygen on Earth is found in water. Only about consistent with similar per minute by volume is all that is found of it as an in the air.
Can fuel be made from hydrogen?The fuel for combustion engines can also be hydrogen. However, they produce exhaust emissions and aren't as productive than FCEVs. Learn more about fuel cells.
To know more about hydrogen visit:
https://brainly.com/question/16979348
#SPJ4
the half-life of a certain radioactive substance is 24 hours. there are 9 grams present initially. a. express the amount of substance remaining as a function of time t. b. when will there be 1 gram remaining?
So after approximately 165.7 hours, there will be 1 gram of the radioactive substance remaining.
A. The amount of the radioactive substance remaining after time t is given by
9 * (1/2)^(t/24),
where t is in hours.
B. To find when 1 gram will remain, we need to solve 9 * (1/2)^(t/24) = 1 for t.
Taking the natural logarithm of both sides gives: log(9 * (1/2)^(t/24)) = log(1).
Dividing both sides by log(1/2) and rearranging, we find: t = 24 * log(9) /
log(1/2) = approximately 165.7 hours.
So after approximately 165.7 hours, there will be 1 gram of the radioactive substance remaining.
the half-life of a certain radioactive substance is 24 hours. there are 9 grams present initially. A radioactive is a radioactive form of an element that will undergo radioactive decay
Learn more about radioactive here:
https://brainly.com/question/1770619
#SPJ4