A substance's hue varies over time: Chemical transformation (Over time, the material is changing into a different chemical.
How can you tell whether a change you witness is chemical or physical?
In a physical change, the substance's shape or appearance changes, but the type of matter it contains stays the same. In contrast, when matter undergoes a chemical transformation, at least one new substance with novel features is created.
How might you tell whether a colour change was a result of a chemical or physical change?Not every change in colour results from a chemical shift. If one were to alter a substance's colour through a non-chemical interaction, such as painting an automobile, the alteration would be physical rather than chemical. This is due to the fact that the car's makeup has not changed.
To know more about chemical change visit:
https://brainly.com/question/2591189
#SPJ4
gases behave most ideally at choose... temperatures and choose... pressures.
Gases are most ideal at high temperature and low pressure. We can infer that intermolecular forces are to blame for the real gas's lower pressure than the ideal gas's pressure.
At a specific temperature and pressure, which gases are predicted to perform most optimally?Helium is the actual gas that behaves the most like an ideal gas. This is due to the fact that helium, unlike the majority of gases, only consists of a single atom, which minimizes the van der Waals dispersion forces.
Which gas exhibits the ideal behavior?Helium
The real gas that acts most like an ideal gas is helium. This is because helium has the lowest possible van der Waals dispersion forces because, unlike most gases, it only contains one atom. Another feature is that, like other noble gases, helium has an entirely full outer electron shell.
What is an ideal gas?An ideal gas is one whose molecular volume and molecular force ratios are both so minimal that they have no impact on the behavior of the gas.
To know more about gases visit:
https://brainly.com/question/29889106
#SPJ4
How many moles of carbon dioxide would be contained in 6.0 L at 132.0 kPa and 47°C?
2 moles of carbon dioxide would be contained in 6.0 L at 132.0 kPa and 47°C. This law is a generalization that includes both Boyle's and Charles' laws.
What is ideal gas?The ideal gas, sometimes known as the perfect gas, is a gas that, in physical behavior, corresponds to a certain idealized connection between pressure, volume, speed temperature known as the perfect, or general, gas law.
This law is a generalization that includes both Boyle's and Charles' laws as special instances, and it asserts that for a given quantity of gas, the product of volume V and pressure P is proportional to absolute temperature T; that is, PV = kT, where k is a constant. This type of relationship for a material is known as its equation of state, and it is adequate to define its gross behavior.
P×V= n×R×T
substituting all the given values in the above equation, we get
132.0×6.0 = n×8.314×47
n = 2 moles
Therefore, 2 moles of carbon dioxide would be contained in 6.0 L at 132.0 kPa and 47°C.
To learn more about ideal gas, here:
https://brainly.com/question/12677792
#SPJ1
which of the following aqueous solutions has the lowest freezing point and the highest boiling point? which of the following aqueous solutions has the lowest freezing point and the highest boiling point? 0.05 m na3po4 0.050 m nacl 0.100 m sucrose 0.050 m cacl2
The aqueous solution with the lowest freezing point and highest boiling point is 0.100 M sucrose.
Freezing point depression and boiling point elevation are directly proportional to the molality (moles of solute per kilogram of solvent) of a solution. Since 0.100 M sucrose has the highest concentration of solute, it will also have the greatest effect on both freezing point depression and boiling point elevation. NaCl, CaCl2, and Na3PO4 have similar molalities, so they will have similar effects on freezing point depression and boiling point elevation.A colligative property is a physical characteristic that depends on the quantity of solute supplied rather than the type of solute; for example, the freezing point will be lowered by the same amount of degrees Celsius whether we add 1000 sugar or salt particles to water.
Learn more about freezing point here:
https://brainly.com/question/3121416
#SPJ4
If we triple the number of moles in the gas vessel at constant pressure, what would the new volume be?Group of answer choicesa. 40 Lb. 20 Lc. 10 Ld. 30 L
We may infer that the new number of moles was tripled, therefore our assumption is sound. 30 L is the same as the new volume.
To determine the factor, the final volume will be divided by the initial volume. As a result, when the amount of gas triples in moles, the volume also triples. The volume will quadruple when the amount of gas is increased by three times. According to Boyle's law, a gas's volume and pressure are inversely related. We therefore anticipate a 13-fold drop in volume at constant temperature if the pressure increases by a factor of 3 (tripled).
Learn more about moles from here:
https://brainly.com/question/26416088
#SPJ4
Calculate the percent composition of the elements in each compound. mgso4 c6h12o6
Composition within C6H12O6 compound is 40%, compared to 53.33% in MgSO4 compound.
Compound? What do you mean?A compound is anything created when two or more separate chemical reactions are mixed together in a specific proportion. Chemical connections that are challenging to break are created when the constituents interact with one another. These bonds occur as a byproduct of atoms sharing or trading electrons.
In MgSO4,
MgSO₄ = 120 g/mole.
Mass of Mg = 24 g.
Mass of S = 32 g.
Mass of O = 16.
Mass of O₄ = 16 × 4
= 64 g.
= 24/120 × 100 %
% comp. = 20 %
= 32/120 × 100%
= 0.266 × 100%
% comp. of S = 26.66 %
comp. of O₄ = Mass of O₄/Mass of MgSO₄ × 100 %
= 64/120 × 100 %
= 0.533 × 100 %
∴ % comp. of O₄ = 53.33 %
In C6H12O6,
Molar mass of compound = 6(12.0)+12(1.01)+6(16.0)
=180g/mol
Mass due to carbon =6(12.0)
=72.06g/mol
% composition of C =72/180×100
=40%
To know more about compound visit:
https://brainly.com/question/20701639
#SPJ4
A tank of compressed helium contains 50.0 g helium. How many moles of helium are in the tank?
A tank of compressed helium contains 50.0 g helium. 12.49 moles of helium are in the tank.
What do you mean by mole ?The term mole is defined as the amount of substance of a system which contains as many elementary entities.
One mole of any substance is equal to 6.023 × 10²³ units of that substance such as atoms, molecules, or ions. The number 6.023 × 10²³ is called as Avogadro's number or Avogadro's constant.
The mole concept can be used to convert between mass and number of particles.
Number of moles = Mass / molar mass
= 50.0 / 4.003
= 12.49 moles
Thus, A tank of compressed helium contains 50.0 g helium. 12.49 moles of helium are in the tank.
To learn more about the mole, follow the link;
https://brainly.com/question/26416088
#SPJ1
how many kilojoules of heat are released when 38.7 g of ch4(g) reacts completely with o2(g) to form ch3oh(g) at constant pressure?
The reaction between 38.7 g of CH4(g) and O2(g) to form CH3OH(g) releases 890 kJ of heat at constant pressure.
Calculation of Heat of Reaction for CH4 and O2 CombinationWhen 38.7 g of CH4(g) reacts completely with O2(g) to form CH3OH(g), the reaction releases a certain amount of heat. This amount of heat can be calculated by using the balanced chemical equation for the reaction and the heat of the reaction (ΔH). The balanced equation for the reaction is CH4(g) + 2O2(g) -> CH3OH(g) + heat. The heat of reaction, which represents the amount of heat released or absorbed in a chemical reaction, can be found in a thermochemistry table or calculated using other thermochemical relationships. In this case, the heat of the reaction is 890 kJ. This means that when 38.7 g of CH4(g) reacts completely with O2(g) to form CH3OH(g), 890 kJ of heat is released at constant pressure.
To know more about thermochemistry, visit:https://brainly.com/question/1253173
#SPJ4
which of the following is an accurate description of ionic bonding? group of answer choices atoms of two different elements share electrons and protons; the resulting compound is bonded together by the strong, binding energy of shared protons. atoms of different elements, having gained or lost electrons, form negative and positive ions that are bonded together by attractive forces between ions with opposite charges. nuclei of bonding atoms exchange electrons; the resulting ions are bonded together by the attractive forces between the negative and positive nucleons. nuclei of two different atoms share electrons, and the resulting compound is tightly bonded by the very strong, induced, electronuclear bonds.
An accurate description of ionic bonding is atoms of different elements, having gained or lost electrons, form negative and positive ions that are bonded together by attractive forces between ions with opposite charges (B).
The answer choices should have as follow :
A. atoms of two different elements share electrons and protons; the resulting compound is bonded together by the strong, binding energy of shared protons.
B. atoms of different elements, having gained or lost electrons, form negative and positive ions that are bonded together by attractive forces between ions with opposite charges.
C. nuclei of bonding atoms exchange electrons; the resulting ions are bonded together by the attractive forces between the negative and positive nucleons.
D. nuclei of two different atoms share electrons, and the resulting compound is tightly bonded by the very strong, induced, electronuclear bonds.
Ionic bondingThe ionic bonding is formed from electrostatic attraction between the two ions which oppositely charged. In specific, there is a transfer of some electrons (outermost) from one atom to another. If the atom loses the electrons, it results in a positively charged ion or cation. Meanwhile, if the atom gaining one or more electron, it becomes an anion or a negatively charged ions.
Sodium chloride (NaCl) is an example of ionic bonding. An atom of sodium (Na) donates one of its electrons to an atom chlorine (Cl) and resulting positive ion (Na+) and negative ion (Cl-) become a stable compound.
Thus, the correct option is B, because only electrons that are shared.
Learn more about ionic bonding by clicking this link :
https://brainly.com/question/11527546
#SPJ4
6. vinegar is a solution of acetic acid, ch3cooh (60.05 g/mol), dissolved in water. it can be neutralized by ca(oh)2. if it took 30.10 ml of 0.100 m ca(oh)2 solution to react with all of the acetic acid in 11.1 g of vinegar, what is the mass percent of acetic acid in the vinegar
The vinegar is a solution of the acetic acid with the molar mass of 60.05 g/mol . The mass percent of the acetic acid in the vinegar is 3.33 %.
The chemical equation is :
2CH₃COOH + Ca(OH)₂ ----> Ca(CH₃COO)₂ + 2H₂O
The molarity of Ca(OH)₂ = 0.100 M
The volume of Ca(OH)₂ = 0.03110 L
The number of moles = molarity × volume
= 0.100 × 0.03110
= 0.00311 mol
The moles of acetic acid = 2 × 0.00311
= 0.0062 mol
The mass of the acetic acid = moles × molar mass
= 0.0062 × 60.05
= 0.37 g
The mass of the vinegar = 11.1 g
The mass percent of acetic acid = (0.37 / 11.1 ) × 100 %
= 3.33 %
To learn more about mass percent here
https://brainly.com/question/13981789
#SPJ4
Name example where someone would create a model as part of a scientific investigation, and explain why they would need to use this model instead of working with the actual thing.
Scientific models are used to easily understand and interpret complex processes and natural phenomenon. For example, there are models for explaining water cycles, volcanic eruptions etc.
What are scientific models ?Scientific models are visual representations or simplified mathematical expressions used to interpret and understand complex process. There are theoretical models, dynamic models, still models as well advanced computer simulation models.
For example, the liquid drop model was used to explain the nuclear fission. Similarly, there are different atomic models to explain the structure of atoms. These are theoretical models.
There are advanced computer simulations nowadays to visualize many natural phenomenon's, like, volcanic eruptions, tectonic movements etc. Similarly still or working models of human organs etc. are examples of scientific models.
Find more on scientific models:
https://brainly.com/question/14250312
#SPJ1
You mix 2 moles of HBr with 3 moles of KOH in enough water to make 1 L of solution. How much KBr do you expect to make?a. 2 molesb. 5 molesc. 3 molesd. 1 moles
c. 3 moles. The three moles of KBr we can expect when You mix 2 moles of HBr with 3 moles of KOH in enough water to make 1 L of solution.
How can you tell whether a solution is simple?The pH of a solution will range from 0 to 14. Solutions having a pH of 7 are referred to as neutral. If the pH is lower than 7, the solution is acidic. When the pH level is higher than 7, the solution is basic.
What is the pH of the buffer solution?When a weak base and its salt are combined with a strong acid, basic buffer—which has a basic pH—is created. The pH of an equal mixture of ammonium hydroxide and ammonium chloride in water is 9.25. They contain the weak base and the weak base salt.
Does lactate serve as a buffer for pH?During prolonged, high-intensity exercise, lactate acts as a temporary "neutralizer" or "buffer" to the cell's increased proton accumulation. Since increased lactate synthesis and acidity go hand in hand, lactate testing is a great "indirect" indicator of the cell's metabolic state.
To know more about moles visit;
https://brainly.com/question/30373566
#SPJ4
Chemistry help please and thank you so much
In a chemical equation, reactants are substances before the reaction, subscripts are numbers added in front of chemical formula, chemical formula is representation of elements in compound,products are substances present after chemical reaction, coefficients are numbers showing the amount of individual atoms.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ1
a solution of cacl2 in water forms a mixture that is 37.0% calcium chloride by mass. if the total mass of the mixture is 449.8 g, what masses of cacl2 and water were used?
The mass of calcium chloride and water used are 166.426 g and 283.374 g respectively.
A solution containing two or more different components is termed as a solution mixture.
The percentage of calcium chloride in the mixture is 37.0% by mass.
This means that in each 100g of the mixture, the mass of calcium chloride = 37.0 g
if the total mass of the mixture = 449.8g
the mass of calcium chloride and water used is calculated as:
mass of calcium chloride
= 37/100 × 449.8g
=166.426 g
And, the mass of water
=( 449.8- 166.426)g
= 283.374 g
To know more about solution mixture here
https://brainly.com/question/12999867
#SPJ4
An organic compound contains 75% carbon and 25% hydrogen. The empirical formula of the compound would be:
A. CH4
B. CH
C. C2H3
D. CH2
The given sentence indicates that the compound's empirical formula is CH2.
What is the name of a ch2 group?Any portion of a molecule and consists of 2 hydrogen atoms bonded to a carbon, which is related to the rest of the protein by two bonds, is known as a methylene group in organic chemistry. The group can be written as CH 2, with the two bonds denoted by the ".
ch2 and h2c can we write?why we occasionally write ch2 and occasionally h2c. CH2 and H2C are identical to one another. Although they both relate to the same entity, CH is sometimes written as H in molecular structures.
To know more about CH2 visit:
https://brainly.com/question/27996213
#SPJ4
a 3.8 g sample of sodium hydrogen carbonate is added to a solution of acetic acid weighing 10.5 g. the two substances react, releasing carbon dioxide gas to the atmosphere. after the reaction, the contents of the reaction vessel weigh 12.0 g. what is the mass of carbon dioxide released during the reaction?
Given: mass of sodium hydrogen carbonate = 3.8 g
mass of acetic acid = 10.5 g
Mass of reactants = mass of sodium hydrogen carbonate & mass of acetic acid = 3.8 + 10.5 = 14.3 g
Mass of reactants = Mass of products in reaction vessel + mass of carbon dioxide (as it escapes)
Mass of carbon dioxide = 14.3 - 12.0 =2.3 g
Thus the mass of carbon dioxide released during the reaction is 2.3
Mass cannot be created or destroyed, under the law of conservation of mass. As a result, the mass of reactants and products must be equal. Each element must have an equal number of atoms on both the reactant and product sides of the reaction. Chemical equations are balanced as a result.
Learn more about Reactants here:
https://brainly.com/question/12250842
#SPJ4
how much water should be added to 1 gallon of pure antifreeze to obtain a solution that is 95% antifreeze
Answer:
0.0526 gallons
Explanation:
Here is another way to set up the solution. (It will give the same answer as Michael's solution.) w = number of gallons of pure waterYou have 1 gallon of pure antifreezeYou want 95% antifreeze in 1+w gallons You can do a weighted combination of concentrations of antifreeze. (0%)(w) + (100%)(1) = (95%)(1 + w) 100 = 95(1 + w) w = 100/95 - 1 ≅ 0.0526 gallons
which bond is a weak bond that arises usually between a hydrogen and either an oxygen or nitrogen atom?
Solution: The bond between a hydrogen and nitrogen atom is weak bond as compared to the bond between hydrogen and oxygen atom is because of more electronegative nature of oxygen.
Bond strength depends upon the atomic size, electronegativity and bond length. The size of Oxygen atom is larger as compared to Nitrogen because of the stable electronic configuration of nitrogen. The electronegativity of oxygen is higher as compared to Nitrogen due to which the bond between Hydrogen and Oxygen is more polar than bond between Hydrogen and Nitrogen. Higher the bond polarity stronger the bond. This is the reason why the bond between Hydrogen and Nitrogen is weak bond as compared to the bond between Hydrogen and Oxygen.
learn more about weak bond and strong bond here
https://brainly.com/question/14104361
#SPJ4
which scenario represents the experimental portion of the scientific method? please choose the correct answer from the following choices, and then select the submit answer button. answer choices a student is in the lab working with a chemical compound and he notices that it is a powder and smells like rotten eggs. using the results of many tests, a scientist proposes a mechanism of action for a new anti-cancer drug. a chemist analyzes a substance and compares the results to those of several known compounds that were analyzed the same way. a scientist provides a tentative explanation for a reaction she has observed.
Scenario A represents the experimental portion of the scientific method.
In scientific research, the experimental portion of the scientific method involves collecting data through observation and experimentation. In scenario A, the student is observing and testing a chemical compound in the lab. By noticing its physical properties, such as its appearance as a powder and smell like rotten eggs, the student is gathering data. This information will then be used to make conclusions and develop hypotheses. In this scenario, the student is gathering data and making observations that will ultimately be used to test and support or refute scientific theories. The experimental portion of the scientific method is a crucial step in the scientific process and helps to increase understanding and generate new knowledge.
Learn more about scientific method here:
https://brainly.com/question/7508826
#SPJ4
when 18.02 g of water is decomposed by electrolysis, 16.00 g of oxygen and 2.02 g of hydrogen are formed. according to the law of definite proportions, what masses, in grams, of (a) hydrogen and (b) oxygen
According to the law of definite proportions, the ratio of the masses of elements present in a chemical compound is always constant and does not vary with the amount of the compound.
Given that 18.02 g of water is decomposed by electrolysis to form 16.00 g of oxygen and 2.02 g of hydrogen, we can calculate the ratio of the masses of oxygen and hydrogen in water.
(a) The mass of hydrogen in water can be expressed as 2.02 g.
(b) The mass of oxygen in water can be expressed as 16.00 g.
Therefore, the masses, in grams, of (a) hydrogen and (b) oxygen in water are 2.02 g and 16.00 g, respectively.
In the case of water, the law of definite proportions states that the ratio of the masses of hydrogen and oxygen in water is always 1:8. This means that, for every 1 gram of hydrogen, there are 8 grams of oxygen in water. This ratio can be determined through experiments such as electrolysis, as described in the previous answer.
The law of definite proportions has important implications for our understanding of chemical compounds and their behavior. It helps us to identify and characterize different compounds and to predict their properties based on the elements they contain. It also forms the basis for the development of the atomic theory and the periodic table of elements.
Learn more about electrolysis here:
https://brainly.com/question/12054569
#SPJ4
what is the ratio of conjugate base to acid for a weak acid at a ph of 5.0? the pka of the acid is 6.0.
The ratio of the conjugate base to the weak acid is 10:1 at a pH of 5.0.The pH of a solution is defined as the negative logarithm of the hydrogen ion (H+) concentration, so pH = -log[H+].
In a weak acid solution, the hydrogen ion concentration is proportional to the degree of dissociation of the weak acid, which can be expressed as follows:
HA + H2O -> H3O+ + A-
where HA is the weak acid, A- is the conjugate base, H3O+ is the hydronium ion, and the arrow indicates the direction of the equilibrium.
The degree of dissociation of a weak acid can be expressed in terms of the acid dissociation constant (Ka), which is given by:
Ka = [H3O+][A-] / [HA]
At the equivalence point of a weak acid, the pH is equal to the pKa of the acid, which is defined as the negative logarithm of the Ka value. In this case, the pKa of the acid is 6.0, so at a pH of 5.0, which is less than the pKa, the weak acid is only partially dissociated.
To calculate the ratio of the conjugate base to the weak acid, we can use the following expression:
[A-] / [HA] = [H3O+] / Ka
Since the pH = -log[H+], we can substitute [H+] for [H3O+] in the above expression.
At a pH of 5.0, [H+] = 10^-5, so:
[A-] / [HA] = 10^-5 / Ka
The value of Ka can be calculated using the pKa:
Ka = 10^(-pKa) = 10^(-6.0) = 1.0 x 10^-6
So, the ratio of conjugate base to acid at a pH of 5.0 is:
[A-] / [HA] = 10^-5 / 1.0 x 10^-6 = 10
So, the ratio of the conjugate base to the weak acid is 10:1 at a pH of 5.0.
Learn more about conjugate base here:
https://brainly.com/question/30225100
#SPJ4
what is the predominant intermolecular force in the liquid state of each of these compounds: ammonia ( nh3 ), carbon tetrabromide ( cbr4 ), and methyl chloride ( ch3cl )?
Part-A
In the liquid form of NH[tex]_{3}[/tex], hydrogen bonding is the main force.
The main forces in the dispersion forces of CBr4
Dipole-dipole forces are the most common types of forces in CH[tex]_{3}[/tex]CL.
Part B:
The compounds' boiling points are listed in decreasing order.
NaF > CH[tex]_{2}[/tex]O > C[tex]_{2}[/tex]H[tex]_{2}[/tex] gas (less boiling point)
These are ionic chemicals :. (more boiling point)
A chemical compound is any material that consists of identical molecules having atoms from two or more different chemical elements.
Atoms from more than 100 different chemical elements, both in their pure forms and when mixed to form chemical compounds, make up all matter in the universe.
Only the atoms that are unique to that element are present in a pure element sample, and each element has its own unique atoms. For instance, the atoms that make up carbon differ from those that make up iron, which differ from those that make up gold. Every element has a distinctive symbol that is made up of one, two, or three letters that either come from the element's present name or from its original (typically Latin) name.
Learn more about Carbon here:
https://brainly.com/question/13719781
#SPJ4
Q) Part A:
What is the predominant intermolecular force in the liquid state of each of these compounds: ammonia (NH3 ), carbon tetrabromide (CBr4 ), and methyl chloride (CH3Cl )?? [options: dipole-dipole forces, hydrogen bonding, or dispersion forces]
Part B:
Rank the following compounds in order of decreasing boiling point: sodium fluoride (NaF ), acetylene (C2H2 ), and formaldehyde (CH2O )
A 300 kg car is moving with an acceleration of 10 m/s/s. What is the force of this car?
The force of the 300kg car moving with an acceleration of 10m/s² is 3000N.
How to calculate force?Force in physics refers to a physical quantity that denotes ability to push, pull, twist or accelerate a body.
The force of a body can be estimated by multiplying the mass of the body by its acceleration as follows:
Force = mass × acceleration
In this question, a 300kg car is said to be moving at an acceleration of 10m/s². The force is estimated as follows:
Force = 300kg × 10m/s²
Force = 3000N
Learn more about acceleration at: https://brainly.com/question/1046166
#SPJ1
calculate the vapor pressure of water above this solution at 338 k . the vapor pressure of pure water at this temperature is 0.2467 atm .
The vapor pressure of a non-volatile solute at 338 K
is 0.176 atm.
Calculate The value of the elevation in boiling point :
∆Tb= 384.6 K – 373.15 K = 11.45 K
Then calculate molality :
molality =∆ТЬ /Kb =11.45/ 0.51 = 22.45 m
A solution of 22.45 molal thus includes 22.45 moles of the solute in 1000 g of the solvent (water). The following step is to determine how many moles of water are present using the molar mass of water and the previously mentioned figure of 1000 g water:
Moles= 1000g /18g/mol=
The mole fraction of water solution :
mole of H20 solution= 55.6 : (55.6+22.45) =0.71
Then calculate The vapor pressure of a non-volatile solute at 338 K :
vapor pressure (at 384.6K) =0.2467 atm
vapor pressure (at 338K) = vapor pressure of pure water (at 384.6K) x Mole fraction of water
vapor pressure (at 338K) 0.2467 atm x 0.7123 = 0.176 atm
Learn more about vapor pressure
https://brainly.com/question/30447018.
#SPJ4
a responder can protect himself/herself from radiation by using shielding as a response action. what materials are best for protecting against beta particles? select one: a. heavy elements (e.g., lead and steel) b. any material (e.g., paper and plastic) c. lighter elements (e.g., acrylic, plastic, and aluminum) d. hydrogenous material (i.e., high in hydrogen content)
A responder can protect himself/herself from radiation by using shielding as a response action. Lighter elements (e.g., acrylic, plastic, and aluminum) are best for protecting against beta particles. Therefore, option c is the right choice.
Aluminum with a thickness of just a few millimeters provides the best protection against beta particles. However, low-atomic-mass materials such as plastic, wood, water, and acrylic glass are suitable for shielding high-energy beta-particle radiation.
The use of these materials in personal protective equipment, which includes all of the clothes that can be worn to avoid any injury or disease that may be caused by exposure to radiation, is another possible application of these materials.
Want to know more about beta particles visit the link which is given below;
https://brainly.com/question/2288334
#SPJ4
you titrate a 200 ml hbr solution with 0.5 m koh. if it takes 150 ml of koh to reach the equivalence point, what was the concentration of the original acid solution?
the HBr solution has a concentration of 0.375 M.
What is the purpose of KOH solution?Lye, commonly known as potassium hydroxide, is an inorganic substance having the composition KOH.
Is KOH a basic or an acid?KOH is a reliable base. It often has a pH between 10 and 13.
The unidentified HBr solution has a concentration of 0.375 M.
Where M1 = Molar mass of HBr = and M2 = V1 x2 x2
V1 = Molar mass for KOH = 0.5 M2 = Volumes of Hyder = 200 ml x1 = n-factor for HBr = 1
V2 = Amount pf KOH Equals 150 ml x 2 = KOH's n-factor = 1
The numbers are now M1 200 1 = 0.5 150 1 M1 = 0.5 150 1 / 200 1 M1 =0.375 M.
Therefore, the HBr solution has a concentration of 0.375 M.
To know more about KOH solution visit:
https://brainly.com/question/29981801
#SPJ4
What is the maximum number of bonds phosphorous can form?
Five covalent bonds are possible with phosphorus, as in PCl₅.
Two chlorides are produced by phosphorus: PCl₃ and PCl₅. Depending on the amount of chlorine present, both products are created when phosphorus burns in chlorine. The diagram of PCl₃ and PCl₅ is attached
Not a noble gas structure, as the phosphorus now possesses 5 pairs of electrons in the outer level. Phosphorus is a chemical element with the symbol P and atomic number 15.
Phosphorus is a mineral that naturally occurs in many foods and is also available as a supplement.
To look more about Phosphorus click here
brainly.com/question/4622631
#SPJ4
which salt would lower the freezing point of a solvent the most? group of answer choices 0.20m na3po4 0.50m cacl2 0.30m na2so4 0.7m nacl
Considering the number of the particles and the molality 0.20m Na3PO4 would lower the melting point the most.
What are colligative properties?Colligative properties are the physical properties of solutions that depend on the number of solute particles in a given amount of solvent, but not on their chemical nature. Examples of colligative properties include boiling point elevation, freezing point depression, osmotic pressure, and vapor pressure lowering.
Since 0.20m Na3PO4 has the most number of particles then it would lower the melting point the most.
Learn more about melting point:https://brainly.com/question/29578567
#SPJ1
Which toxic substance is often used to extract gold and results in harmful environmental effects?
a. acid mine drainage
b. carbon dioxide
c. sulfur dioxide
d. cyanide
e. fluoride
Cyanide is the poisonous substance used to extract gold (d).
What is cyanide?The extraction of metals and electroplating are two industrial procedures that commonly involve the highly poisonous chemical compound cyanide. Sodium cyanide, potassium cyanide, hydrogen cyanide gas, potassium ferrocyanide, and ferricyanide salts are some of the different forms it can take.
Cyanide is a poisonous compound that is frequently used to extract gold and has a negative impact on the environment. In order to remove gold particles from ore, the very poisonous chemical cyanide is employed in the gold mining process. Despite its effectiveness, cyanide leaking can have negative impacts on the ecosystem and neighboring plants and animals. Animal and fish deaths as well as contaminated water sources have been connected to cyanide releases from mining operations.
In addition, chronic exposure to low concentrations of cyanide can harm human health and result in headaches, vertigo, and nausea. Despite the fact that many nations have laws governing the use of cyanide in gold mining, its widespread usage and a lack of effective management and containment techniques continue to raise concerns.
To know more about cyanide, visit:
https://brainly.com/question/13030946
#SPJ4
The formula for Boyle’s Law is P subscript 1 V subscript 1 equals P subscript 2 V subscript 2 where P subscript 1 is the initial pressure, V subscript 1 is the initial volume, P subscript 2 is the final pressure, and V subscript 2 is the final volume. To solve these problems: (1) identify all that is known; (2) identify what is unknown; (3) write the equation; (4) isolate the unknown; and, (5) calculate the answer.
Boyles's law is one of the gas laws that describe the relationship between the pressure and volume of a given mass of gas at a constant temperature.
What is Boyle's law?According to Boyle's law, a gas's pressure is inversely proportional to its volume when the gas is of a certain mass and maintained at a constant temperature. In other words, as long as the temperature and volume of the gas remain constant, the relationship between a gas's pressure and volume is inverse.
The equation of Boyle's law is given below:
P₁V₁ = P₂V₂
where;
P₁ is the initial pressureV₁ is the initial volumeP₂ is the final pressureV₂ is the final volumeLearn more about Boyle's law at: https://brainly.com/question/1437490
#SPJ1
submitting work based on data that you did not collect yourself
The use of another person's information without properly citing and recognizing it within your own work is known as plagiarism.
What exactly does data mean?In technology, the term "data" refers to information that has been formatted in a way that makes it effective for transmission / processing. Data is information that has been binary-digitally changed for usage with modern computers and transmission technologies. The topic data may be expressed in both the plural and singular forms.
What functions do data serve?Information that has been transformed it into format that can be transmitted or processing is referred to as data in computing. Data is information that has been binary-digitally changed for usage with modern computers and transmission technologies.
To know more about data visit :
https://brainly.com/question/24710783
#SPJ4