A car comes to a complete stop from an initial speed of 55 mi/hr in a distance of 120 ft.a) Calculate the constant acceleration in ft/sec? b) With the same constant acceleration, what would be the stopping distance (s), (in ft) from an initial speed of 70 mi/hr?

So the jumper falls from the summit of El Capitan to a height of 150 m in 4.1 seconds, at which time she releases her parachute.

An item falling in a vacuum is subject to just one external force, gravitational force, which is quantified as the object's weight. A free falling object is one that moves only due to the effect of gravity, and its motion is defined by Newton's second law of motion. A body is considered to be in freefall when it moves only under the influence of Earth's gravity. The ball's motion will be accelerated by an external force operating on it. This free-fall acceleration is also known as gravity acceleration.

Here,

The time taken for the free fall from the top of El Capitan to a height of h = 150 m can be calculated using the kinematic equation:

h = vi * t + (1/2) * g * t^2

where h is the height, vi is the initial vertical velocity (0 m/s), g is the acceleration due to gravity (9.8 m/s^2), and t is the time taken. Solving for t, we get:

t = sqrt(2 * h / g)

Plugging in h = 150 m and g = 9.8 m/s^2, we get:

t = sqrt(2 * 150 m / 9.8 m/s^2)

t = 4.1 s

So, it takes 4.1 seconds for the jumper to fall from the top of El Capitan to a height of 150 m, at which point she opens her parachute.

To know more about free fall,

https://brainly.com/question/14532814
#SPJ4

Use the following formula to get an oscillator's period:

T = 2π √(m/k)

where T denotes the time, m denotes the object's mass, and k denotes the spring constant.

Fill in the formula with the measured value of T and the known value of m, then find k. The spring constant is thus shown.

The length of time it takes for an oscillator to complete one full cycle of motion is known as the oscillator's period. It is used to characterise the frequency of any oscillating system and is a fundamental feature of oscillating systems. The period of a mass on a spring is the length of time it takes for the mass to oscillate between its maximum displacement and its minimum displacement before returning to its maximum displacement. The formula T = 2 (m/k) can be used to determine the period of a simple harmonic oscillator, such as a mass on a spring. T stands for the period, m for the object's mass, and k for the spring constant. An oscillator's cycle time.

Learn more about oscillators period here:

https://brainly.com/question/29160064

#SPJ4

The gravitational force between two students is 5.336*10^-8 N.

According to universal gravitational law, the force acting on two bodies is given by the formula = F = (G *m1*m2)/r^2

Here mass of one student =m1=75kg,another student m2=54kg

Distance of separation =0.45m, r =0.45/2=0.225m

Force = 6.67*10^-11 (75*54)/(0.225)^2

F=5.336*10^-8 N

The force between two students is 5.336*10^-8 N.

Learn more about gravitational force,

https://brainly.com/question/72250

Answer:

Below

Explanation:

Precalculus, pre-algebra math can be used to solve this

21 f/ s * 23 s = 483 ft

So the angle u required to have the same average normal stress in both rods is tan^(-1) (16/9).

In physics, stress is defined as the force acting on a material's unit area. Strain is the term used to describe the effect of stress on the body. Stress can cause physical deformities. The total force exerted per unit area is defined as stress. In terms of units, stress equals pressure (Newtons per meter).

Here,

The average normal stress in both rods can be calculated using the equation for stress, σ = F/A, where F is the force and A is the cross-sectional area. The force can be calculated from the weight of the chandelier, W = m * g, where m is the mass and g is the acceleration due to gravity.

Let's call the angle between the rod AB and the vertical axis u. The forces in the two rods can then be calculated as follows:

F_AB = W * sin(u)

F_BC = W * cos(u)

Next, we need to find the cross-sectional area of each rod:

A_AB = π * (d_AB/2)^2

A_BC = π * (d_BC/2)^2

where d_AB and d_BC are the diameters of rods AB and BC, respectively. Substituting these values into the equation for stress:

σ_AB = F_AB / A_AB

σ_BC = F_BC / A_BC

For the average normal stress in both rods to be the same, we need to set σ_AB = σ_BC and solve for the angle u:

σ_AB = σ_BC

F_AB / A_AB = F_BC / A_BC

W * sin(u) / (π * (d_AB/2)^2) = W * cos(u) / (π * (d_BC/2)^2)

Solving for the angle u, we find:

tan(u) = (d_BC/2)^2 / (d_AB/2)^2 = (4/3)^2

u = tan^(-1) (16/9)

So the angle u, such that the average normal stress in both rods is the same, is equal to tan^(-1) (16/9).

To know more about stress,

https://brainly.com/question/13261407

#SPJ4

complete question:

The 20-kg chandelier is suspended from the wall and ceiling using rods AB and BC , which have diameters of 3 mm and 4 mm, respectively. Determine the angle u so that the average normal stress in both rods is the same.

As the coating material is gradually deposited, a transparent thin coating is visible on glass that reflects white light.

According on the composition of their binder, coatings are classified as organic or inorganic. Coatings with an organic binder are known as organic coatings. Coatings classified as inorganic contain an inorganic binder, such as a silicate.

Glass surfaces were coated for a variety of reasons, including stability, convenience, and safety. The both glass surface as well as the coating must be ready for the coating procedure in order for the coating to be consistent and long-lasting.

To know more Coating Material about visit:

https://brainly.com/question/28392459

#SPJ4

Answer:

Angular momentum

Explanation:

Angular momentum is a conserved physical quantity, similar to the way that energy is a conserved quantity

The speed is 608 mph for the airplane.

We can see that the question that we have here is a case of a direct variation. We have been told that the speed of the plane and the distance that have been covered are both decreasing and thus we can be able to write the proportionality that;

s α d

Where s is the speed  and d is the distance

We then have that;

k = s/d

k = 380/5

= 76

At d = 8

s = 76 *8

s = 608 mph

The speed of the plane can be seen as 608 mph.

Learn more about speed:https://brainly.com/question/28224010

#SPJ1

Dorsal (i.e., posterior) refers to the back region of the human body. So the correct term used is posterior.

Dorsal (anatomy), an anatomical phrase of location refers to the back or upper side of an organism or sections of an organism (from Latin dorsum 'back').To describe the anatomy of animals, including humans, standard anatomical words of location are utilised. The phrases, which are often derived from Latin or Greek roots, describe an object in its normal anatomical position. This position defines what is in front ("anterior"), behind ("posterior"), and so on. The body is defined using anatomical planes and anatomical axes as part of defining and characterising concepts.

The meaning of words can vary depending on whether an organism is bipedal or quadrupedal. Furthermore, some phrases may have no meaning at all for other creatures, such as invertebrates; for example, an animal that is radially symmetrical will have no anterior surface, but can still have a description that a component is close to the middle ("proximal") or distant from the middle ("distal") ("distal").

To know more about dorsal and ventral visit:

https://brainly.com/question/29316882

#SPJ4

The velocity of the truck decreases.

The directional speed of an item in motion as an indication of its rate of change in position as perceived from a specific frame of reference and measured by a specific standard of time (e.g., 60 km/h northbound) is known as velocity. The idea of velocity is crucial in kinematics, the part of classical mechanics that explains the motion of bodies.

Velocity is a physical vector quantity that requires both magnitude and direction to define. Speed is the scalar absolute value (magnitude) of velocity, and it is a coherently derived unit whose quantity is measured in the SI (metric system) as metres per second (m/s or ms1). "5 metres per second," for example, is a scalar, whereas "5 metres per second east" is a vector.

To know more about velocity visit:

https://brainly.com/question/18084516

#SPJ4

Single Wire moves down, loop rotates left.

A single-wire system is a method of transmitting power or signals using only a single conductor. This is in contrast to the usual use of a pair of wires to provide a complete circuit, or an electrical cable containing (at least) two conductors for this purpose.

A single-wire transmission line is not the same as a single-wire earth return system. This is beyond the scope of this article. The latter system relies on reverse current flow through earth, using earth as a second conductor between earth terminal electrodes. A single-wire transmission line does not have a second conductor of any kind. 

Learn more about single wire at https://brainly.com/question/30357148

#SPJ1

The best suited Gaussian surface for this purpose would be a sphere of radius R + a/2. Gauss' law states that the electric flux through any closed surface is proportional to the charge enclosed within that surface.

In this case, using a sphere as the Gaussian surface will enclose the entire charged cube, making it easier to calculate the electric field. The size of the sphere (R + a/2) should be chosen such that it is large enough to encompass the charged cube, but not so large as to include any other charged objects that might affect the electric field calculation. A Gaussian surface is a hypothetical surface used in physics to calculate the electric flux through a closed surface. Gaussian surfaces are often chosen for their symmetry and simplicity, and are used in conjunction with Gauss' law to calculate the electric field at a point in space. The electric flux through the Gaussian surface is proportional to the charge enclosed within the surface, and by measuring the electric flux, the electric field at the point of interest can be calculated.

Learn more about gaussian surface:

brainly.com/question/14810497

#SPJ4

The kangaroo is in the air for approximately 0.667 seconds.

Velocity is defined as the displacement of the object in a given amount of time and is referred to as velocity.

A kangaroo with a vertical speed of 6.57 m/s may jump over an object 2.20 m high.

To find the time a kangaroo is in the air, we need to calculate the time it takes to reach the peak of its jump and then double that time (to account for both the ascent and descent).

We can use the formula for vertical motion under constant acceleration (g = 9.8 m/s²):

t = √(2h / g)

where h is the height of the jump (2.20 m) and g is the acceleration due to gravity (9.8 m/s²).

Plugging in the values, we get:

t = √(2 × 2.20 m / 9.8 m/s²)

t = √(0.447)

t ≈ 0.667 s

So the kangaroo is in the air for approximately 0.667 seconds.

Learn more about Velocity here:

brainly.com/question/12904979

#SPJ1

The period of the wave is 4.1s and the speed of these waves is found to be 1.44m/s.

A wave's fundamental property is frequency. It is a method for determining how many waves pass through a point in a certain amount of time. The distance that a point on a wave moves determines its velocity. The relation between frequency and velocity for every wave is normally proportional.

Period = T= t/n = 45/11 = 4.1s

Frequency => f = 1/T => 1/4.1 => 0.24Hz

The distance from one crest to the next trough is mentioned as 3.0 m. Hence, The wavelength λ = 2 x 3m = 6m

Speed of the wave v =  λ xf => 6x 0.24 => 1.44m/s

Wave frequency is the quantity of waves that move past a specific place in a specified amount of time. The number of wave crests (high points) that pass the reference position in one second, or in any other time interval, can be used to calculate the frequency of a wave. The frequency of the waves rises as the number rises.

Learn more about waves here:

brainly.com/question/21393625

#SPJ4

while sitting on a dock of the bay, you notice a series of waves going past. you observe that 11 waves go past you in 45 s and that the distance from one crest to the next trough is 3.0 m.

Find the (a) period, (b) frequency, (c) wavelength, and (d) speed of these waves.

The Moon will next be near Spica approximately 29.5 days later. This is because the Moon orbits the Earth once every 29.5 days, which is known as its synodic period.

The next full Moon will occur approximately 29.5 days after the full Moon on September 14.

These values are not the same because the phases of the Moon are not dependent on its position relative to other celestial objects. The time it takes for the Moon to complete one full cycle of phases, from full to full, is 29.5 days.

Meanwhile, the time it takes for the Moon to return to the same position relative to Spica is slightly different and can be calculated using the sidereal period of the Moon, which is 27.3 days.

Find out more on the moon here: https://brainly.com/question/1286359

#SPJ1

Aristotle is a towering figure in ancient Greek philosophy, who made important contributions to logic, criticism, rhetoric, physics, biology, psychology, mathematics, metaphysics, ethics, and politics.

If the mass of the Earth is reduced to ½, time period increases √2 times.

If the mass of the Earth is doubled, time period decreases 1/√2 times.

The Time Period is the length of time required for a single full oscillation to take place. T stands for it. Seconds are its measure.

Time period of earth's rotation is inversely proportional to the square root of mas of the Earth.

Hence,

if the mass of the Earth is reduced to ½, time period increases √2 times.

If the mass of the Earth is doubled, time period decreases 1/√2 times.

Learn more about time period here:

https://brainly.com/question/2144584

#SPJ1

The primary influence on the interaction between hydrophobic molecules in water is the E: "hydrophobic effect".

The hydrophobic effect refers to the tendency of hydrophobic (water-fearing) molecules to aggregate and minimize their exposure to aqueous environments, such as water. This interaction is primarily driven by van der Waals forces, which are weak attractive forces that occur between neutral molecules.

The hydrophobic effect is important in biochemistry as it plays a role in stabilizing the structures of proteins, lipids, and other biological molecules. By aggregating and reducing their exposure to water, hydrophobic molecules increase the stability of the overall structure, helping to preserve its functional integrity.

You can learn more about hydrophobic effect at

https://brainly.com/question/18522370

#SPJ4

The best explanation of how the barometer in Figure 5.2 works is Air pressure outside the tube causes the mercury to move in the tube until the air pressure inside and outside the tube is equal. Correct answer: letter A.

This is demonstrated in the diagram below, where the atmospheric pressure is represented by the red arrows, and the mercury is represented by the blue arrows:

Option B is incorrect because it is the air pressure outside the tube that causes the mercury to move in the tube. Options C and D are incorrect because the air pressure is the primary factor in causing the mercury to move in the tube, not the weight or capillary action of the mercury.

Option E is incorrect because it is the air pressure that causes the mercury to move in the tube, not a vacuum.

Learn more about barometer:

https://brainly.com/question/11904913

#SPJ4

The best describes electricity generation using wind turbines is: Wind turbines can be constructed on either vertical or horizontal axes. The correct option is B.

Axes of wind turbines can be either vertical or horizontal; there are benefits (and drawbacks) to each type. Turbines aligned on a horizontal axis are the primary type seen and are common in large-scale operations. Turbines with vertical axis blades are perpendicular to the ground and work well in more extreme conditions.

Wind energy refers to the process of creating electricity using the wind, or air flows which happen naturally in the earth's atmosphere. Wind energy is produced by wind power. Modern wind turbines are used to collect kinetic energy from the wind and generate electricity.

Learn more about wind energy at: https://brainly.com/question/27997211

#SPJ4

Although part of your question is missing, you might be referring to this full question: Wind energy is increasingly relied upon to help meet global energy needs. Wind energy can be used to generate electricity using wind turbines. Which of the following best describes electricity generation using wind turbines?

a. Newer wind turbines can generate consistent electricity even when there is no wind.

b. Wind turbines can be constructed on either vertical or horizontal axes.

c. Wind turbines are rarely used offshore because they tend to float in rough seas.

d. Wind turbines can be used by individual homeowners but have limited effectiveness when connected to the electrical grid.

The velocity will be 9.32 m/s.

The gravitational potential energy (Ug) of the satellite can be calculated using the formula where G is the gravitational constant (G = 6.67 x 10⁻¹¹ Nm²/kg²), Me is the mass of the Earth, M is the mass of the satellite, and r is the distance between the center of the Earth and the satellite.

At point a, the distance between the center of the Earth and the satellite is equal to a, so Ug can be calculated as:

Ug = -G x (Me x M) / a

At point b, the distance between the center of the Earth and the satellite is equal to b, so Ug can be calculated as:

Ug = -G x (Me x M) / b

The difference in gravitational potential energy between point a and point b is given by:

Ug(b) - Ug(a) = G x (Me x M) x (1/b) - This difference in potential energy is equal to the change in kinetic energy as the satellite moves from point a to point b, since the total energy of the system is conserved. The kinetic energy at point a can be calculated using the formula:

Ke = 0.5 x m x v0

where m is the mass of the satellite and v0 is the velocity of the satellite at point a. The velocity can be calculated using the equation of motion for a satellite in orbit:

at point a, the velocity can be calculated as:

v0 = (G x Me / a)

Learn more about gravitational potential energy:

brainly.com/question/19768887

#SPJ4

Because of the distance between the and the in part A, the wavelength would be 0.6 m, thus my frequency would be 343 m/s / 0.6 m = 571.67 Hz (correct).

A phase in electrical signalling is a wave's location on a waveform cycle at a specific instant in time. It offers a measurement in either degrees (0-360) or radians (0-2), depending on where the wave is in its cycle. A phase is one radian, or around 57.3 degrees.

Waves can group together into what are known as wave packets, and the speed at which a wave packet moves is referred to as group velocity. Phase velocity refers to the speed at which a wave's phase moves.

learn more about wave's phase

https://brainly.com/question/23053691

#SPJ4

d) Material A because it has the largest acoustic impedance mismatch with water and will reflect the most sound. This will result in the best reflection of sound waves and improved sonar detection capabilities for the submarine.

If the acoustic impedance of the material used for the sonar detector is too close to that of water, it will result in a low reflection of sound waves. This can lead to a weaker return signal and reduced accuracy of the sonar system. The low reflection can also cause difficulty in distinguishing between the incoming and reflected sound waves, leading to errors in the data collected by the sonar system. In such a scenario, the sonar system may not be able to perform effectively and accurately. Thus, it is important to choose a material with an appropriate acoustic impedance that provides a sufficient mismatch with water for effective and accurate sonar detection.

To know more about Sound Waves visit: https://brainly.com/question/11797560

#SPJ4

The period T = 0.933 sec ; The max speed Vmax = 0.87m/s; The total energy or work done =  0.211J.

For a single particle conducting SHM, the only constant is its periodic time, or simply time period. Due of the solutions' flexibility in scaling, the period remains constant. Therefore, you can scale this motion upward or downward by any factor s and still obtain a valid motion s if you have any valid motion (t) representing the pendulum's angle as a function of time t. (t).

K= string constant = 23N/m

Amplitude a => 13 cm

Mass = 508g

T= 2π√(m/k)

=>  2π √(0.508/23) => 0.933 sec

Maximum speed => √(k/m) x a

                               => √(23/0.508) x 0.13

                                => 0.87m/s

The total energy of string => 1/2 k a^2

                                      => 1/2 x 23x 0.13^2

                                    => 0.211J

Learn more about amplitude here:

brainly.com/question/21410187

#SPJ4

Think about driving with the front seat occupied. Polarization is preferred in the visible light that is reflected off the car's hood.

when observing a light source that emits light that is randomly polarized through a linear polarizer. As the polarizer is turned 360 degrees, the light intensity will stay constant and match that of the initial light source.

A linear polarizer is anything that, when used with an incident unpolarized beam, generates a beam of light with an electric vector that vibrates largely in one direction and just a little portion of it in the opposite direction.

To know more about Polarization visit:-

https://brainly.com/question/29217577

#SPJ4

The acceleration of the elevator is 0.59 m/s^2.

Acceleration is the rate of change of the velocity of an object with respect to time.

The acceleration of the elevator can be found using Newton's second law of motion, which states that the net force on an object is equal to its mass times its acceleration (F = ma). In this cases, the difference between the two readings on the scale is equal to the net force acting on the box, which includes the gravitational force and the upward force due to the acceleration of the elevator.

F = ma = (76.25 N - 73.58 N) / 7.5 kg = 0.59 m/s^2

Therefore, the acceleration of the elevator is 0.59 m/s^2.

Learn more about acceleration here :brainly.com/question/605631

#SPJ1

The statement A: "The shell fired at an angle closest to 45 degrees lands farther away" is correct.

A shell fired at an angle closest to 45 degrees will travel the farthest horizontal distance compared to a shell fired at a different angle. This is because the shell fired at 45 degrees will have a greater horizontal component to its velocity, allowing it to travel farther horizontally.

At an angle closest to 90 degrees, the shell will have a very small horizontal component to its velocity, resulting in a smaller horizontal distance traveled. The trajectory of a shell fired at an angle depends on the speed and angle of launch, as well as the forces acting upon it such as air resistance.

"

Complete question

for two shells fired at the same speed which statement about the horizontal distance traveled is correct

A: The shell fired at an angle closest to 45 degrees lands farther away

B: The shell fired at an angle closest to 90 degrees lands farther away

"

You can learn more about shell firing at

https://brainly.com/question/16986007

#SPJ4

A wave is an energetic disturbance in a medium that doesn't include any net particle motion.

What are waves?

No physical thing travels along a wave as it carries information or energy between two points in the form of signals. A time factor is added to the equation to determine a wave's frequency. All of our wireless communications are entirely dependent on waves.

1. The number of wave crests (high points) that pass the fixed point in one second, or in any other time interval, can be used to calculate the frequency of a wave.

2. The time it takes for two successive crests (one wavelength) to pass a specified point.

3. They are related inversely f= 1/t

4. mechanical waves require medium.

5. Electromagnetic waves.

6. Medium

7. Parallel

8. Perpendicular

To learn more about Waves, here

https://brainly.com/question/25954805

#SPJ1

The work done and power required for mass1 is more when compared to mass2. workdone of mass1 and mass2 are 8mgd & 6mgd. Power required of mass1 and mass2 are 8mgd/t & 6mgd/t.

vi is the beginning speed of an item in metres per second. In accordance with the work-energy principle, a particle's change in kinetic energy is equivalent to the sum of all the loads exerted on it, or the work of the force applied F(in subscript resultant).

Mass1 = 8m; d1 => d

Mass 2 = 3m; d2=>2d

The time take for both the mass to travel is same.

Work done by mass1 = m1xgxd1

                                   => 8mgd

Work done by mass2 = 3mxgx2d

                                    => 6mgd

Power required mass1 => W/t = 8mgd/t

                            mass2 => W/t => 6mgd/t

In science and engineering, power is the rate during which work is completed or energy is delivered. It may be expressed as the product of the work completed (W) or the energy transferred (E) divided by the time interval (t), or W/t.

Every time a force pushes something over a distance, work is done. By multiplying the force by the distance travelled in the force's direction, you may calculate the energy transferred, or work done.

Learn more about power here:

brainly.com/question/26384777

#SPJ4