a bcc metal has an atomic weight of 55.845 g/mol and a density of 7.89 g/cm3. what is the radius of this atom in nm?

The distinction between glucose forms (a and b) is important to biologists and nutritionists because it shows the various configurations that glucose may take in three-dimensional space.

The two forms, known as isomers, a and b, share the same chemical formula but have differing spatial arrangements of its atoms. Because of the numerous ways they are arranged, they have various physical and biological characteristics, including variations in solubility and reactivity, as well as interactions with other molecules like enzymes and cell membranes. The relevance of the various forms of glucose in biology and nutrition is connected to how cells utilise glucose as a source of energy. Polysaccharides like starch and cellulose may be created by linking together glucose molecules. When joined together, the various types of glucose may take on distinct characteristics that have an impact on how the body digests and uses these polysaccharides.

learn more about glucose here:

https://brainly.com/question/2396657

#SPJ4

Only certain wavelengths of light will be absorbed since an atom can only hold a certain amount of energy.

The visible zone contains the transitions from 1 to 2 (i.e., 1 to 2, 3 to 2, 4 to 2, 5 to 2, etc.). This explains why only particular wavelengths of light are emitted by and absorbed by hydrogen. The electrons can only be in these specific orbitals, which explains why. The most stable atom's ground state was represented by the orbit nearest to its nucleus, while the orbits farther away denoted higher-energy excited states. Only a few different wavelengths of light were emitted as a result of transitions from an excited state to a lower-energy state.

Learn more about wavelengths of light from here:

https://brainly.com/question/13676179

#SPJ4

A reduced atomic radius is the result of the electron cloud being drawn closer to the nucleus due to a larger effective nuclear charge's stronger attraction to the electrons.

Atomic is derived from the Greek word atomos, which means "uncut" or "indivisible," and means "indivisible particle" in Latin. the meanings of atomic. adjective. containing, involving, or pertaining to atoms.

Atomic is an adjective, as was said above. Use of the adjective: Atomic hydrogen is released in a stream. We created a little nuclear bomb in the basement. The hairs of a bedbug are virtually atomic, to use an adjective.

To know more about Atom visit:

https://brainly.com/question/20948994

#SPJ4

Substrate-level phosphorylation is the term used to describe the direct transfer for phosphate between substrates.

In chemistry, a phosphate is an anion, salts, functional group, an ester made from phosphoric acid. Most frequently, it refers to orthophosphate, which is a product of orthophosphoric acid (also known as phosphoric acid) H3PO4. One phosphorus atom is joined with four oxygen atoms to form a phosphate. A phosphate group is what happens when a phosphate molecule is joined to a carbon-containing molecule.

In the development of bone and teeth, phosphate is helpful. Additionally, phosphorus is a component of a number of essential compounds, such as those that the cell uses for DNA, cell membranes, and energy (deoxyribonucleic acid).

To know more about phosphate visit :

https://brainly.com/question/2426918

#SPJ4

Answer:

Carbon

Explanation:

Carbon is the BASIS of organic chemistry.

Of the four aqueous solutions listed, the one with the lowest freezing point and the highest solution boiling point is 0.050 M NaCl. This is because NaCl is a strong electrolyte, meaning it dissociates completely into ions in solution, and thus has the greatest effect on lowering the freezing point and raising the boiling point compared to the other solutions, which are weaker electrolytes or nonelectrolytes.

Solution is a homogeneous mixture consisting of two or more substances. The substance which is present in a smaller amount in a solution is called the solute or solute, while the substance which is present in a greater amount than the other substances in the solution is called the solvent or solvent.

Learn More About Solutions at https://brainly.com/question/3184550

#SPJ4

The mass of solution is 1.0× 10² g

Mass is a measure of the increase in an object based on force. Everything that occupies space and has mass is called matter. Matter consists of a single substance and a mixture of substances.

Matter has mass and volume. Mass is a measure of the resistance of an object to a certain force or can be interpreted as the amount of matter in an object. Meanwhile, volume is the size of the room it occupies.

Mass is expressed in kilograms (kg) or grams (g), 1 kg = 1000 g. While the volume is expressed in units of cubic meters (m³) or cubic decimeters (dm³). The unit of volume is a unit in the international system. Volume is also often expressed in liters (L) or milliliters (ml).

Learn more about mass of solution at

https://brainly.com/question/29482678

#SPJ4

The number of lab groups with 5 students would be 1.

To determine the number of lab groups with 5 students, we need to find the remainder when the number of students is divided by the number of students per group. In this case, 39 students ÷ 4 students per group = 9 groups with a remainder of 7.

Since we can't have fractional lab groups, we need to add another group to accommodate the remaining 7 students. This means that the number of lab groups with 5 students would be 7 ÷ 4 students per group = 1 additional group.

So, the number of lab groups with 5 students would be 1.

To know more about  lab groups here

https://brainly.com/question/24647770

#SPJ4

--The given question is incorrect, the correct question is

"There are 39 students in Ms. Salazar's chemistry class. If Ms. Salazar divides the class into 9 lab groups of 4 or 5 students each, what would be the number of lab groups with 5 students?"--

The molecular weight of Bw4Sv3 is unknown, as it is not a recognized chemical formula.

To find the number of grams in a certain number of moles of a substance, you need to know its molecular weight in grams per mole.

The molecular weight of a substance is the sum of the atomic weights of all the atoms in its molecular formula. To convert the number of moles of a substance to its weight in grams, the molecular weight of the substance is multiplied by the number of moles.

For example, if the molecular weight of a substance is 100 g/mol and you have 1 mole of it, the weight would be 100 g.

However, in this case, Bw4Sv3 is not a recognized chemical formula, so its molecular weight cannot be determined.

Read more about molar mass here:

https://brainly.com/question/837939

#SPJ1

A homogenous mixture or solution is created when 50 g of sugar and 100 g of water are combined at 20 °C.

A solution is a particular kind of mixture in which one or more ingredients are uniformly dispersed in another ingredient, known as the solvent. The solvent in this situation is water, and the solute is sugar.

The amount of solute in the solvent can be used to calculate the concentration of the solution. In this scenario, the sugar solution's concentration would be 50 g/100 g, or 0.5 g/g, or 50%. In other words, water makes up 50% of the solution's weight and sugar makes up 50% of it.

Temperature, pressure, and the makeup of the solute and solvent all have an impact on how soluble they are in a given solvent. In this instance, rising temperatures cause sugar to dissolve more readily in water. This implies that when the temperature rises, more sugar will dissolve in the solution.

To know more about solution, visit:

https://brainly.com/question/7932885

#SPJ4

A protein can alter shape in response to harsh temperatures and ph changes. It's known as denaturation.

(PROH-teen) a structure composed of amino acids. The body need proteins to operate correctly. They serve as the building blocks for several bodily components, including the skin, hair, and acids, cytokines, and antibodies.

Protein is present in every human cell. The core component of proteins is an amino acid chain. In order for your body to repair damaged cells and create new ones, you need proteins in your diet. Protein is essential for proper growth and development in children, adolescents, and expecting women.

To know more about Protein visit :

https://brainly.com/question/29776206

#SPJ4

The correct answer to the first question is a) 0.4Km = [S].

When the velocity of an enzymatic reaction is 30% Vmax, the substrate concentration is 0.4 times the Michaelis constant (Km). This means that the substrate concentration is equal to 0.4 times the Km value.

The correct answer to the second question is e) a and b.

The glycogen phosphorylase enzyme can be activated/stimulated by both phosphorylation of selected serine residues in the phosphorylase b form of the enzyme, as well as the actions of positive allosteric modulators such as AMP

Find out more about enzymatic reaction

brainly.com/question/29102181

#SPJ4

question:-

When the velocity of an enzymatic reaction is 30% Vmax, what is the relationship between Km and substrate concentration? a) 0.4Km=[S] b) Km=0.4[ S] c) Km=4[ S] d) [S]=40Km Question 7 The glycogen phosphorylase enzyme is activated/stimulated by: a) phosphorylation of selected serine residues found in the phosphorylase b form of the enzyme. b) the actions of positive allosteric modulators such as AMP. c) proteolysis through the actions of trypsin followed by self digestion. d) the association of 4 phosphorylase b subunits to produce phosphorylase a, a functional oligomeric protein. e) a and b

An enzyme known as DNA polymerase adds nucleotides to exposed bases during DNA replication.

An enzyme known as DNA polymerase, which adds nucleotides to the exposed bases of the DNA strand, catalyses the replication of DNA. The DNA double helix unwinds and the two strands split during DNA replication. This enables the original DNA strand's exposed bases to act as a template for the construction of a new complimentary strand.

By pairing the appropriate complementary nucleotide with the exposed base and then joining the complementary nucleotides together via the formation of a phosphodiester bond, DNA polymerase adds nucleotides to the exposed bases. A primase is required to add a short RNA primer to the template strand since DNA polymerase can only add nucleotides to the 3'-end of a developing strand.

To know more about DNA, visit:

https://brainly.com/question/28481425

#SPJ4

The mass of sucrose is [tex]16.228 g[/tex] while added to [tex]19.9g[/tex] of water to make [tex]0.82m[/tex] solution.

In this equation, the mass of sucrose is calculated using the molar concentration [tex](M)[/tex] and the mass of water (in grams) that is needed to make the solution. The equation states  that the mass of sucrose is equal to the molar concentration of the solution multiplied by the mass of water divided by 1 molar concentration.

The mass of sucrose needed to make a 0.82 M solution can be calculated using the following equation:

mass of sucrose = [tex](0.82 M x 19.9 g of water) / (1 M)[/tex]

mass of sucrose = [tex]16.228 g[/tex]

Therefore, [tex]16.228 g[/tex] of sucrose must be added to [tex]19.9 g[/tex] of water to make a [tex]0.82 M[/tex] solution.

To know more about calculation of mass of sucrose, check out:

https://brainly.com/question/14853851

#SPJ4

The anion radius is 0.072 nm.  the cation has a charge of +2, the anion must have a charge of -2

The force of attraction between a divalent cation and an anion is proportional to the product of their charges and inversely proportional to the distance between them. The force can be expressed as F = k * q1 * q2 / r, where k is the Coulomb constant (8.99 x[tex]10^-9[/tex] N [tex]m^2/C^2[/tex]), q1 and q2 are the charges of the cation and anion, respectively, and r is the distance between the centers of the ions.

Since the cation has a charge of +2, the anion must have a charge of -2. Rearranging the equation and plugging in the known values, we can solve for the anion radius: r = sqrt(k * q1 * q2 / F) = sqrt(8.99 x [tex]10^9[/tex] N [tex]m^2/C^2[/tex] * 2 * 2 / (1.92 x [tex]10^-8[/tex] N)) = 0.072 nm.

Learn more about anion radius here:

https://brainly.com/question/1835367

#SPJ4

The sodium-potassium pump requires a molecule of ATP's energy.

The main source of energy in cells is ATP (adenosine triphosphate), a highly energetic molecule. It is utilised by enzymes to fuel a variety of cellular functions, such as muscle contraction, protein synthesis, and ion transport. It stores and transmits chemical energy within cells.

The sodium-potassium pump is an active transport process that transports ions against their concentration gradient, requiring energy input. As a result, it needs the energy from an ATP molecule. The pump creates a concentration gradient and preserves the resting membrane potential by exchanging three sodium ions (Na+) for two potassium ions (K+) in the cell membrane.

The ATP molecule is hydrolyzed to ADP as part of the pumping process, and the energy contained in the ATP molecule is utilised to power the movement of ions against their concentration gradient. Numerous cellular processes, such as nerve impulses and muscle contractions, depend on this crucial mechanism, and the pump needs ATP energy to operate effectively.

To know more about ATP, visit:

https://brainly.com/question/15543060

#SPJ4

Based on the identification number 1978, the chemical being leaked from the trailer is likely to be gasoline. Option C is correct.

In the United States, the identification number on a placard is known as the UN Number or the Hazardous Materials Identification System (HMIS) number, which is used to identify hazardous materials being transported. The UN number 1978 will corresponds to gasoline, which is a flammable liquid.

It is very important to follow proper safety procedures when responding to a highway incident is involving hazardous materials, as gasoline can be highly flammable as well as pose a risk of fire or explosion.

To know more about gasoline here

https://brainly.com/question/13402652

#SPJ4

The reaction between HBr and KOH is a neutralization reaction, which occurs when an acid reacts with a base to form a salt and water.

The balanced chemical equation for the reaction between HBr and KOH is:

HBr + KOH -> KBr + H2O

This equation tells us that one mole of HBr reacts with one mole of KOH to form one mole of KBr and one mole of water.

Next, we need to find the number of moles of HBr that reacted with KOH. This can be calculated using the volume (150 ml) and concentration (0.5 M) of the KOH solution:

moles KOH = 0.5 M x 150 ml / 1000 ml/L = 0.075 moles

Since one mole of HBr reacts with one mole of KOH, the number of moles of HBr is equal to the number of moles of KOH:

moles HBr = 0.075 moles

Finally, we can use the number of moles of HBr and the volume of the HBr solution (200 ml) to calculate its concentration:

concentration HBr = moles HBr / (200 ml / 1000 ml/L) = 0.075 moles / 0.2 L = 0.375 M

To learn more about neutralization reaction please click on below link

https://brainly.com/question/30068395

#SPJ4

Mercury (Hg) has an atomic number of 80 and a mass number of 200.59. It has seven stable isotopes. The most abundant of these probably have more than 80 neutrons each.

Option A is correct.

The number of a chemical element in the periodic system, in which the elements are arranged by the number of protons in the nucleus, which increases with increasing number. As a result, the atomic number is also the number of protons in the neutral atom, which is always the same as the number of electrons. The number of protons in an atom's nucleus is known as its atomic number. An element's identity is determined by its number of protons—for example, a carbon atom with six protons is an element, regardless of how many neutrons are present.

An atom's atomic number is the same as the number of protons in its nucleus or electrons in an electrically neutral atom. The number of protons in an atom. A sodium atom, for instance, has 11 electrons and 11 protons.

Incomplete question :

On the periodic table of the elements, mercury (Hg) has an atomic number of 80 and a mass number of 200.59. It has seven stable isotopes. The most abundant of these probably have ________.

A. more than 80 neutrons each.

B. more than 50 neutrons each

C. less than 80 neutrons each

Learn more about atomic number :

brainly.com/question/11353462

#SPJ1

Answer:

hi!!

Explanation:

first we search for the volumic mass :

volumic mass = mass/volum=465/60.0 = 7.75 gper cubic centimeters

density = volumic mass of the tin box / volumic mass of water = 7.75/ 1 (g per cubic centimeters)= 7.75

The molecular equation, complete complete ionic equation, and the net ionic equation for the reaction of na3po4 is a double displacement reaction.

A precipitation reaction is very insoluble nickel phosphate. It is produced as a light green precipitate when aqueous solutions of the two salts are mixed. The other product is soluble when sodium chloride and that remains in that particular solution for that time.

(1) Molecular equation:

3NiCl2 (aq) + 2Na3PO4 (aq) = Ni3(PO4)2 (s) + 6NaCl (aq)

(2) Ionic equation:

3Ni(2+) (aq) + 6Cl(-) (aq) + 6Na(+) (aq) + 2PO4(3-) = Ni3(PO4)2 (s) + 6Na(+) (aq) + 6Cl(-) (aq)

(3) Net ionic equation:

3Ni(2+) (aq) + 2PO4(3-) (aq) = Ni3(PO4)2 (s)

The net ionic equation is actually obtained by cancellation of the common Na(+) and Cl(-) terms on both the sides which are reactant and product sides.

Learn more about double displacement reaction:

brainly.com/question/29307794

#SPJ4

The term mole concept is used here to determine the number of moles of atoms present in 1 × 10²² atoms of iron. The number of moles of atoms present in 1 × 10²² atoms of iron is

One mole of a substance is defined as that quantity of it which contains as many entities as there are atoms exactly in 12 g of carbon - 12. The formula used to calculate the number of moles is:

Number of moles = Given mass / Molar mass

From the equation, Number of atoms = Number of moles × 6.022 × 10²³

The Number of moles = Number of atoms / 6.022 × 10²³

= 1 × 10²² / 6.022 × 10²³  = 1.66 × 10⁴⁴ moles

Thus the number of moles of atoms in 1 × 10²² atoms of iron is 1.66 × 10⁴⁴ moles.

To know more about mole concept, visit;

https://brainly.com/question/15209553

#SPJ1

The square root of the gas's molecular mass is inversely proportional to the rate of effusion. the gas's chemical composition; He.

Note: Either removing electrons from an AntiBonding Molecular Orbital or adding electrons to a Bonding Molecular Orbital can lower the bond order of a homonuclear diatomic molecule.

Hydrogen (H2), oxygen (O2), nitrogen (N2), and all halogens are homonuclear diatomic molecules. A common triatomic homonuclear molecule is ozone (O3). Arsenic (As4) and phosphorus (P4) are examples of homonuclear tetratomic molecules.

To know more about molecular mass visit :-

https://brainly.com/question/18446366

#SPJ4

B) 0.75L of hydrogen gas would be produced by placing a 2.2g zinc nail into an excess of hydrochloric acid at standard temperature and pressure (STP).

The general gas equation, often known as the ideal gas law, is the equation of state for an ideal gas. It has a number of limitations, but it provides a decent approximation of the behavior of numerous gases under various circumstances. 

 The common empirical form of the ideal gas law is as follows:

[tex]PV=nRT[/tex]

The reaction that occurs can be represented as:

[tex]Zn+2HCl[/tex] → [tex]ZnCl_2 + H_2[/tex]

As we see,

1 mole hydrogen is generated by 1 mole zinc.

It is stated that the reaction is occurred at Standard Temperature and Pressure.

So, We know,

At STP, 1 mole would contain 22.4 L

∵ 1 mole zinc will provide  22.4 L of hydrogen gas.

We shall now determine the quantity of zinc moles by the formula

(Provided mass) / (Molecular weight of Zinc = 65)

⇒ [tex]\frac{2.2}{65}[/tex]

⇒ 0.035 moles

As a result, the quantity of hydrogen gas ([tex]H_2[/tex]) generated by a 0.035 mole would be:

[tex]0.035*22.4 = 0.78[/tex] ≈ 0.75 L

Learn more about ideal gas law:

brainly.com/question/28257995

#SPJ4

Yes, you can determine the molar mass of the metal if you know the balanced reaction and the molar masses of the reactants.

By calculating the mole ratio of reactants, you can figure out the mole ratio of the products, and then calculate the molar mass of the metal by multiplying the mole ratio of the metal chloride product by its molar mass.

For example, if the balanced equation is 2Na + Cl2 → 2NaCl, then the moles of the metal in 2NaCl is 2 moles and the molar mass of the metal is 22.99 g/mol.

Learn more about the molar mass of the metal:

https://brainly.com/question/6112557

#SPJ4

There are 0.0027 moles of acetic acid are present in a 15.6 ml solution of vinegar.

By applying the following formula, one can determine how many moles of acetic acid there are:

(Mass of the solute) times / (molar mass of solute)

mass of solute = x (concentration) (volume of solution)

1.07 g moles (mass of solute) = 1.07 g / 60.052 g/mol (mass of solute = 0.0685 g/ml x 15.6 ml) = 0.0027 moles.

The Na, also known as the Avogadro constant, is a proportionality constant that links a sample's amount of material to the number of constituent particles that make up those particles. Acetic acid, with a molar mass of 60.052 g/mol, has a concentration of 0.0685 g/ml in a sample of vinegar. A mole is the unit of mass for a material that contains its component particles.

Learn more about vinegar here:

https://brainly.com/question/4239583

#SPJ4

In a generic phase diagram, it is possible for the liquid to be the most stable phase at:

Temperatures less than the temperature of the triple point.

Pressures less than the pressure of the triple point.

The triple point on a phase diagram represents the conditions (temperature and pressure) at which all three phases (solid, liquid, and gas) can coexist in equilibrium. At temperatures below the temperature of the triple point and pressures below the pressure of the triple point, the liquid phase is the most stable phase and can exist on its own without undergoing a phase change.

On the other hand, temperatures greater than the critical temperature and pressures greater than the critical pressure are in the supercritical region, where the distinction between the liquid and gas phases is no longer meaningful, and the substance exists as a supercritical fluid. In this region, the liquid is not a stable phase and would evaporate or boil if present.

Learn more about pressure here:

https://brainly.com/question/29341536

#SPJ4

The three moles of KBr we can expect when You mix 2 moles of HBr with 3 moles of KOH in enough water to make 1 L of solution.

Option C is correct.

A solution's pH will be between 0 and 14. The term "neutral" refers to solutions with a pH of 7. The solution is acidic if the pH is below 7. The solution is basic when the pH level is higher than 7.

A basic buffer with a basic pH is created when a strong acid and a weak base and its salt are combined. Ammonium chloride and ammonium hydroxide are mixed in water to a pH of 9.25. They have the salt with a weak base and a weak base.

Lactate serves as a brief "neutralizer" or "buffer" to the cell's increased proton accumulation during prolonged high-intensity exercise. Lactate testing is an excellent "indirect" indicator of the metabolic state of the cell due to the correlation between elevated acidity and increased lactate synthesis.

You mix 2 moles of HBr with 3 moles of KOH in enough water to make 1 L of solution. How much KBr do you expect to make?a. 2 molesb. 5 moles c. 3 moles. d.  1 moles

Learn more about moles:

brainly.com/question/30373566

#SPJ4

The conjugate acid has one more h than its conjugate base. A conjugate base may be positively charged, neutral, or negatively charged.

Conjugate acids and bases are ideas included in the Bronsted-Lowry acid-base theory. An acid loses a hydrogen ion as it splits into its ions in water. The conjugate base of the acid is the species that results.

In a chemical process, the conjugate base has the capacity to either acquire or absorb a proton. The proton and hydrogen is given away in the process by the conjugate acid. The conjugate acid has one more h than its conjugate base. A conjugate base may be positively charged, neutral, or negatively charged.

Therefore, the conjugate acid has one more h than its conjugate base. A conjugate base may be positively charged, neutral, or negatively charged.

To learn more about conjugate acid and conjugate base, here:

https://brainly.com/question/12883745

#SPJ1

3.20 grams mass of oxygen gas is released in the reaction if 8.06 g of magnesium oxide decomposes to form 4.86 g of magnesium.

A chemical reaction that results in the breakdown of one reactant into two or more products is known as a decomposition reaction.

Decomposition reaction = 2Mg0= O2 + 2Mg

In order to get two moles or 48.6 grammes, and one mole, or 32 grammes, of oxygen, you must break down two moles, or 80.6 grammes, of magnesium.

The result of 8.06 grammes of MgO is (8.06 32) / 80.6.

= 3.2 grammes of oxygen gas

To learn more about decomposition reaction please visit -
https://brainly.com/question/30136091
#SPJ4