which of the following products would be produced from hydroboration/oxidation of 1-pentyne? e only a and b only b and e only a only

A CH2 group is present in alcohol the signal at around 69 parts per million; a CH group is present at about 30 parts per million; and a CH3 group is present at about 19 parts per million.

3 indications! Pentane has a mirror plane running directly through the centre, just like in the ethane illustration. Pentane has three different sorts of carbon atoms, which are visible if we rotate the molecule 180 degrees at a time.

Only one substance, 2-pentanol, provides five indications based on the observed structures. Therefore, a. 2-pentanol is the recommended solution.

To know more about alcohol visit :-

https://brainly.com/question/14229343

#SPJ4

Microscale glassware kits include connectors to fit the smaller glassware. The black connectors should be used when high boiling aromatics are present.

Compared to the white connectors, the black connectors are more resistant to the reactant. This suggests that when high boiling aromatics are present, the black connectors should be utilized; otherwise, the tan connections can be used.

As a result, the connectors enable the use of various glassware or components with a single ground glass joint.

Aromatics are organic substances called hydrocarbons that only include the atoms carbon and hydrogen.

To learn more about black connectors, please refer -
https://brainly.com/question/20983338
#SPJ4

The shortest wavelength (nm) emitted by an electron in a hydrogen atom undergoing a transition from the n = 4 level is 97.2nm

Wavelength will be emitted, and the highest energy transition that is from n is equal to 4 levels. To the ground level, therefore sets wavelength will be 1 over wavelength will be equal to a ride, constant re into brackets 1 over n

E1 - E4= E => -2.18*10^-18 J [tex]\frac{15}{16\\}[/tex]

=> -2.04*10^-18 joule

ΔE = Ephoton = h∨= hc/∧

here, H is plank's constant, C is the speed of light and ∧ is the wavelength of the incoming photon

∧= hc/Ephoton = (6.622*10^-34j.s)(2.998*10^8)/2.04*10^-18J
=9.720^10^-18m
= 97.20nm

To learn more about wavelength Please visit -
https://brainly.com/question/13533093
#SPJ4

For hydrogen peroxide, the best course of action for each type of chemical exposure is as follows:

Explanation of each of the types of chemical exposure to hydrogen peroxide:

Learn more about data sheet

https://brainly.com/question/23694150

#SPJ4

Answer:

Explanation:

the presence of a receptor located in the cytoplasm or nucleus specific to the hormone in cells

The statement correctly identify a lipid-soluble hormone that diffuses from the blood and through the interstitial fluid, the cells in the tissue to act upon are steroids are hormones that dissolve in fat and diffuse through the cell membrane into the cell.

Diffusion is the movement of substances with or without crossing the cell membrane from an area of ​​high concentration to an area of ​​low concentration. Diffusion is a type of passive transport because it does not require energy that occurs due to differences in concentration.

Endocrine glands consist of secretory cells that secrete hormones into the interstitial space which are then absorbed into the surrounding blood vessels. Steroids and thyroid hormones are hormones that are soluble in lipid. The hormone will diffuse from the blood through the interstitial fluid through the lipid bilayer of the cell membrane into the cell. The hormone will bind to receptors in the cytoplasm or nucleus to form an active hormone-receptor complex. Thus affecting the DNA (gene acceptor), stimulate or synthesis of specific proteins or enzymes.

Learn more about steroid at:

https://brainly.com/question/29382368

#SPJ4

Hence option oxidizing and cause damage to proteins is correct.

Halogens are highly reactive oxidizing agents that cause damage to proteins.

Fluorine, chlorine, bromine, iodine (I), astatine, and tennessine are the six chemically related elements that make up the group of elements known as "halogens" in the periodic table. However, some authors would exclude tennessine because its chemistry is unknown and is theoretically expected to be more similar to that of gallium.

In a redox chemical reaction, an oxidising agent is a material that "accepts" or "receives" an electron from a reducing agent. So every substance that oxidises another material is an oxidant.

For such more question on oxidizing

https://brainly.com/question/14041413

#SPJ4

The reaction would be spontaneous at a low temperature .

An exothermic reaction is a chemical reaction that releases energy in the form of heat, light, or sound to the surroundings. The energy released during the reaction decreases the total energy of the system, making the reaction spontaneous.

From the thermochemical equation, we can see that this reaction is exothermic thus the reaction can move in the forward direction when we lower the temperature as shown

Learn more about exothermic reaction:https://brainly.com/question/4345448

#SPJ1

option a,b,c are correct.gather your belongings,turn off all hot plates & other heating apparatus, turn off all water these are options that must be done in case of a fire alarm or other evacuation .

To guarantee your safety, take prompt action when the fire alarm goes off. The fire alarm system was created and constructed to give you a head start so you may safely leave the building in an emergency.Never dismiss a warning or believe it to be fake or the outcome of a test.The nearest and safest exit and/or stairs must be used by everyone to leave the building.Never leave during a fire alarm activation in an elevator.Once outside, make your way away from the structure. Gather on the sidewalk of the building next door or across the street.The firefighters and fire engines will be working in front of the structure. Don't stand in their way as they enter the building.

learn more about heating Refer:/brainly.com/question/11737047

#SPJ4

When ions with opposing charges attract, an ionic compound is created. Although it contains charged particles, an ionic substance is overall neutral.

Ions are charged particles that form when an atom (or group of atoms) receives or loses an electron, and ionic compounds are composed of these charged particles. An anion is a negatively charged ion, whereas a cation is a positively charged ion.

For example, table salt or sodium chloride are two-element ionic compounds. Here, an ionic bond is created when the sodium ion, Na+, attracts the chlorine atom (ion), C l -, which has a negative charge.

To learn more about ionic compounds visit:

brainly.com/question/9167977

#SPJ4

1 inch per second (in/s) = 5 foot per minute (ft/min). 7.8845 in/sec is equal to 39.4225 ft/min.

A unit conversion is the expression of the same property in a different unit of measurement. Time, for example, can be expressed in minutes rather than hours, and distance can be converted from miles to kilometers, feet, or any other length measurement.

We must convert one unit to another in order to achieve accuracy and avoid measurement confusion.

Thus, 1 inch per second (in/s) = 5 foot per minute (ft/min). 7.8845 in/sec is equal to 39.4225 ft/min.

To learn more about the unit conversion, follow the link;

https://brainly.com/question/19420601

#SPJ1

The shape of a protein is typically not used as a basis for protein separation and purification.

Other properties such as size, charge, and binding properties are commonly used for protein purification. For example, cation-exchange chromatography uses the charge of proteins to separate them, and affinity purification involves binding proteins to specific molecules or ligands. Additionally, electrophoresis and 2D-PAGE are commonly used for protein separation and purification.

Proteins are large, complex molecules made up of amino acids that carry out a variety of functions in the body. They act as enzymes, hormones, antibodies, and structural components, and are essential for all living organisms. Proteins are composed of long chains of amino acids, and each protein has its own unique sequence of amino acids.

Learn more about proteins:

https://brainly.com/question/15604041

#SPJ4

Gasoline, rubber, and plastics all use alkane, alkene, and alkyne, respectively. Examples of alkanes include methane (CH4) and ethane (C2H6). Alkenes include substances like propane (C3H8) and ethene.

Alkanes are saturated hydrocarbons in nature. Saturated hydrocarbons are alkanes with only one atom in the chemical structure. The formula for an alkane is CnH2n+2. Methane, butane, propane, and ethane are the four alkanes.

The simplest alkane molecule, methane, is made up of one carbon atom and four covalently bound hydrogen atoms. The compounds were detected as the methyl compound is created when we swap out one hydrogen atom for another atom or molecule.

To know more about alkene visit:

https://brainly.com/question/29283735

#SPJ4

The mass of solid KIO3 required for the preparation of 250 ml of a 0.01m KIO3 solution is  0.00535 g.

To determine the mass of solid potassium iodate (KIO3) required for the preparation of 250 mL of a 0.01 M solution, we can use the following formula:

molarity = Mass x Volume / 1000 x molar mass

Where:

m = mass of KIO3 (g)

M = molarity of solution (0.01 M)

V = volume of solution (250 mL)

molar mass = molar mass of KIO3 (214.02 g/mol)

First, convert the volume of solution to liters:

V = 250 mL * 1 L / 1000 mL = 0.25 L

Next, put the values into the formula:

m = 0.01 * 0.25 / 1000 * 214.02 g/mol

m = 0.00535 g

Therefore, 0.00535 g of potassium iodate is required to prepare 250 mL of a 0.01 M KIO3 solution.

In this calculation, we used the relationship between the molarity (M), volume (V), and mass (m) of a solution to determine the amount of solid potassium iodate required to prepare a specified volume and concentration of the solution. This relationship is expressed by the formula:

molarity = Mass x Volume / 1000 x molar mass

where m is the mass of solute, M is the molarity of the solution, V is the volume of the solution, and molar mass is the molecular weight of the solute. The division by 1000 is necessary because the volume was expressed in liters and the molar mass in grams.

Learn more about molarity here:

https://brainly.com/question/8732513

#SPJ4

The pressure in container B is twice the pressure in container A.

In the physical sciences, pressure is defined as the stress at a point within a confined fluid or the perpendicular force per unit area. A 42-pound box with a bottom area of 84 square inches will impose pressure on a surface equal to the force divided by the area it is applied to, or half a pound per square inch. The weight of the atmosphere pressing down on each square inch of the Earth's surface is known as atmospheric pressure, which is approximately 15 pounds per square inch at sea level. One pascal is equal to one newton per square meter when expressing pressure in SI units.

Learn more about Pressure

brainly.com/question/29341536

#SPJ4

Question:

Consider Two Separate Gas Containers At The Following Conditions:

During a baseball game, the sound of the bat hitting the ball can be heard in most parts of the stadium. That sound is weaker at greater distances. The cause of this phenomenon is inverse-square law.

Sound is a physical disturbance from an equilibrium condition that travels via an elastoplastic medium. A completely subjective definition of sound, as perceived by the ear, is also viable, but it is not especially informative and is overly limited, because it is important to speak of noises which can be heard by the auditory system, such as those produced by dog whistles or sonar technology.

The inverse-square law, that states that the strength of a sound wave is inversely related to the square of the distance to the source, is the cause of this phenomena. The strength of such sound wave reduces as the distance to the source rises.

Therefore,  the cause of this phenomenon is inverse-square law.

To learn more about sound, here:

https://brainly.com/question/733324

#SPJ1

An acid is a substance that accepts a pair of electrons and forms a covalent bond with the source of the electrons. A base is a substance that donates an unshared pair of electrons to a recipient species that can share the electrons.

A chemical that, when combined with certain metals, emits hydrogen ions in water and forms salts. Acids have a sour taste and cause certain dyes to turn red. Some acids produced by the body, such as gastric acid, can aid organ function. Hydrochloric acid is an example of an acid.
A substance that can accept hydrogen ions in water and neutralise acids. Bases have a soapy or slick feel to them and can turn certain dyes blue. Sodium hydroxide is an example of a base. The pH scale is used to quantify basicity.

Go through the given link below to know mmoremmoreoreore about acid:-

https://brainly.com/question/25148363

#SPJ4

The correct option is (a) i.e. Dipole-dipole interactions between aldehydes and ketones are more powerful than the dispersion forces of alkanes.

Aldehydes and ketones have higher boiling points than alkanes of the same molecular mass due to the presence of polar carbonyl functional groups (-C=O) in aldehydes and ketones. The carbonyl group introduces a polar nature to the molecule, which allows for stronger intermolecular forces, such as dipole-dipole interactions, to exist. Alkanes, on the other hand, are nonpolar and do not have polar functional groups, so the intermolecular forces are weaker. Therefore, aldehydes and ketones have a higher boiling point than alkanes of the same molecular mass.

To know more about Aldehydes please refer: https://brainly.com/question/12308782

#SPJ4

Question - Aldehydes and ketones have higher boiling points than alkanes of the same molecular mass.

(a) Dipole-dipole interactions between aldehydes and ketones are more powerful than the dispersion forces of alkanes.

(b) Aldehydes and ketones exhibit dipole-dipole interactions, which are weaker than the dispersion forces of alkenes.

(c) Aldehydes and ketones exhibit dipole-dipole interactions, which are acidic than the london forces of alkenes.

(d) None of the above

Basically the concave mirror will change it because of the curved look same thing with convex

Answer:

pdf

Explanation:

principal diffuse. fundamental orbital

When a substance is dissolved in water, one or maybe more H+ ions are lost, and this is what is meant by an acid. A hydrogen atom with no further protons left is known as an H+ ion.

The hydrogen atom serves as a symbol for the most fundamental of all atoms because it just has single proton one and electron. In addition to this most common isotope, the hydrogen atom can also be found in protium, deuterium, and tritium.

H2 is the molecular formula for hydrogen, with a molar mass of 1. The atomic number one element hydrogen, abbreviated H, is the lightest. The gas has the chemical formula H2, and it is tasteless, colorless, and extremely combustible.

To know more about hydrogen atom visit:

https://brainly.com/question/7916557

#SPJ4

Resource availability is the single factor that controls the number of teh species in the ecosystem.

The availability of resources in an ecosystem can have significant effects on the populations of organisms within it. When resources are abundant, populations can grow and thrive, leading to higher population densities and increased competition for those resources.

On the other hand, when resources become limited, populations may decline and struggle to survive, leading to decreased population densities and increased competition for remaining resources. In extreme cases, resource limitation can result in extinction of populations or even entire species. Therefore, resource availability is a key factor that shapes the structure and dynamics of ecosystems and the populations that inhabit them.

Learn more about ecosystems:https://brainly.com/question/13979184

#SPJ1

Answer:

Explanation:

A molecule is a basic unit of a chemical substance made up of two or more atoms that are bonded together. A compound, on the other hand, is a substance made up of two or more different elements that are chemically bonded together.

Every compound is a molecule because it is made up of at least two chemically bonded atoms, but not every molecule is a compound because a molecule can be made up of the same type of atoms and not be a compound.

For example, molecular oxygen (O2) is made up of two oxygen atoms, but it is not a compound because both atoms are the same element. On the other hand, water (H2O) is a compound made up of hydrogen and oxygen atoms.

A Brainly star would be appreciated if it helped you!

Electrons in energy shell 1 2 2 2 2, Electrons in energy shell 2 4 8 8 8, Electrons in energy shell 3 blank blank 3 8, Electrons in energy shell 4 blank, blank blank 2.

Only a specific number of electrons can fit in each shell: the first shell can hold up to two, the second shell up to eight (2 + 6) electrons, the third shell up to 18 (2 + 6 + 10) electrons, and so on. The nth shell can theoretically accommodate up to 2(n2) electrons, according to the general formula.

The formula for an energy level's maximum number of electrons is 2 (n2). The energy level's fundamental quantum number, n, is present here. As a result, the first orbit has 2(12)=2 electrons, the second orbit has 8 electrons, and so on.

To know more about energy shell visit:-

https://brainly.com/question/491265

#SPJ4

Question:

For the following atoms in their ground state, determine theb number of electrons in each energy shell. If there are no electrons in the particular energy shell, leave that answer box blank.

Total Electrons in the atom

6

10

13

20

there are more and more electron pairs that are not shared.Because there are more non-bonding electrons, 0, 1, and 2 correspondingly.

the decreasing order of the bond angle is NO2+>NO2>NO2. Due to the fact that lone pair-lone pair repulsion is stronger than bond pair-bond pair repulsion, this enhances the repulsion between nonbonding electrons. Bond angles diminish as a single pair of electrons at the central atom begin to resist the bound pair of electrons, slightly inward shifting the bonds. An increase in the bond angle occurs as the back bonding rises. The size of nonbonding pairs is greater than that of bonded pairs. Their stronger repulsions tend to reduce a molecule's bond angles.As we move from top to bottom, the bond angle reduces from NH3 to BiH3 due to the core atom's decreased electronegativity. The bond angle of the molecule reduces as the electronegativity of the central atom decreases.

Learn more about electrons Here :

https://brainly.com/question/28977387

#SPJ4

According to the electronic configuration, the pair of elements which  is most likely to form an ionic bond is calcium and oxygen.

Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.

Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.

Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable.

Learn more about electronic configuration,here:

https://brainly.com/question/29157546

#SPJ1

Atom 1,2,6 and 7 are coplanar with the two carbons in the double bond.

In the structure below, the two carbons in the double bond are labeled as 1 and 2. To determine which of the labeled atoms are coplanar with the two carbons in the double bond, it is necessary to examine the arrangement of the atoms in space.

The atoms that are coplanar with the two carbons in the double bond are likely to be the atoms bonded directly to the double-bonded carbons, such as atoms 3, 4, 5, and 6 in the structure. These atoms are all located in the same plane as the double-bonded carbons, as indicated by their shared electrons in the covalent bonds. Atom 7, on the other hand, is not coplanar with the double-bonded carbons because it is not directly bonded to either carbon.

It is worth noting that molecular structures can be represented in different ways, and the 2D representation in the structure above may not accurately depict the true 3D arrangement of the atoms. Nevertheless, the principle of determining coplanarity based on bonding relationships remains the same.

Learn more about carbons:

brainly.com/question/22530423

#SPJ4

Answer:

The evaporation amount of water disappear increase 38.98% after magnetization. An electric field can rotate water molecules upwards with the torsion force.

Explanation:

the effect of magnetic field (MF) on the partial physical properties of water are reported, tap water (TW) and 4 types of magnetized water (MW) were measured in the same condition. It was found that the properties of TW were changed following the MF treatment, shown as the increase of evaporation amount, the decrease of specific heat and boiling point after magnetization, the changes depend on the magnetization effect. The electric field concentrates the negative charge on the oxygen atom. The negative charge declines from -0.383 to -0.414 and, at the same time, the positive charge increased from 0.191 to 0.207. Thus, water molecule becomes more acidic and more prone to form dimmers, trimmers and so on.

Learn more about water disappear here:

https://brainly.com/question/30520372

#SPJ4

According to the electronic configuration, sodium is  an atom that loses one electron when it reacts with another atom.

Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.

Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.

Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule.

Learn more about electronic configuration,here:

https://brainly.com/question/29184975

#SPJ1

In the given chemical equation, the limiting reactant is calcium as the amount of it present will limit the product formation once it is used up.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ1

In all the cases, a homogeneous solution is formed.  Solubility is the measure of a solute's ability to dissolve in a solvent.

A solute plus a solvent make up a solution. The thing that dissolves in the solvent is called the solute. Solubility is the measure of a solute's ability to dissolve in a solvent.

Latoya measured 60 mL of vinegar into a bottle she measured 5 g of baking soda into a balloon. She placed a balloon over the top of the bottle. It shook the baking soda into the vinegar. She repeated the steps adding 10,15 and 20 g of baking soda. In all the cases, a homogeneous solution is formed.

Therefore,  in all the cases, a homogeneous solution is formed.

To know more about solution, here:

https://brainly.com/question/29263728

#SPJ1