which of the following in each pair is likely to be more soluble in carbon tetrachloride, ccl4? benzene (c6h6) or kcl: benzene formic acid (hcooh) or butanol (ch3ch2ch2ch2oh): butanol

The percentage by mass of sodium (Na) in a formula unit of sodium hydrogen carbonate (NaHCO₃) is 27.4% (Option C)

We'll begin by obtaining the molar mass of sodium hydrogen carbonate (NaHCO₃). This is shown below:

Next, we shall determine the mass of sodium, Na in NaHCO₃. Details below:

Finally, we shall determine the percentage of sodium, Na in NaHCO₃. This is shown below:

Percentage of Na = (mass of Na / mass of NaHCO₃) × 100

Percentage of Na = (23 / 84) × 100

Percentage of Na = 27.4%

Thus, the percentage of sodium, Na is 27.4% (Option C)

Learn more about percentage composition:

https://brainly.com/question/11952337

#SPJ1

The total pressure in the flask is determined by the ideal gas law which is 4.00 atm.

This law states that the pressure of a gas is equal to its number of moles times its temperature divided by its volume. For this question, we need to calculate the number of moles of each gas before the reaction.

Methane has a molar mass of 16.04 g/mol,

so 253 mL of methane would be 1.106 moles.

Chlorine has a molar mass of 35.45 g/mol,

so 891 mL of chlorine would be 2.587 moles.

Thus, the total number of moles in the flask is 3.693.

Next, we need to calculate the number of moles that have reacted. 72.5% of the reaction has been completed, so 0.725 moles of the 3.693 moles have reacted.

Finally, the total pressure in the flask is equal to the number of moles times the temperature divided by the volume. This gives a pressure of 4.00 atm.

Learn more about pressure:

brainly.com/question/28012687

#SPJ4

The partial pressure of oxygen in the mixture is 250 mmHg by using given  dalton's law as per follow.

According to Dalton's law, the combined pressure of a gas mixture is equal to the sum of the individual partial pressures of its constituents.

In this instance, the total pressure of the mixture (Ptotal) as well as the partial pressure of b (P N2) are both provided.

As a result, the partial pressure of oxygen (P O2) can be determined using the formula: PO2 = Ptotal - PN2 = 470 mmHg - 220 mmHg = 250 mmHg

Nitrogen and oxygen are present as a gaseous mixture. The partial pressure of oxygen (P O2) is equal to 250 mmHg if the overall pressure of the mixture is 470 mmHg and the partial pressure of nitrogen is 220 mmHg.

Learn more about partial pressure   here:

https://brainly.com/question/13199169

#SPJ4

Answer: Sugar is said to have a solubility of

180 g in

100 g of water at

20∘C.his tells you that dissolving that much sugar per

100 g

of water would produce a saturated solution.

A saturated solution is a solution in which the rate at which solid particles are dissolved is equal to the rate at which dissolved solute particles reform the solid.

Simply put, a saturated solution is a solution that cannot dissolve more solute than what is already dissolved.

The density of a 48.0 % by mass of aqueous solution of H₂SO₄ is 1.3783g/cm³. The molarity of the solution is 13.78 M.

The mass of the sulfuric acid= 48 % by mass = 48 g

The mass of the given solution= 100 g

The density of the given solution= 1.3783 g

The density = mass / volume

Volume = mass / density

Volume = 48 / 1.3783

             = 34.82 mL

The moles = mass / molar mass

                 = 48 / 98

                 = 0.48 mol

The molarity is expressed as

Molarity = moles / volume in L
              = 0.48 / 0.03482

              = 13.78 M

Thus, the molarity of the solution is 13.78 M.

To learn more about molarity here

https://brainly.com/question/29577417

#SPJ4

167 J of heat we must add to the ice in order for us to melt all of the ice in it. Hence, the final situation results in water.

To calculate the amount of heat needed to melt all the ice, you first need to calculate the total amount of energy (in joules) required to melt the ice and convert it to water at 0°C. The formula for this is:

= Q

= m x ΔHf

where m is the mass of the ice (in kilograms) and

ΔHf is the heat of fusion of water (334 J/g).

Therefore, the total amount of energy (in joules) required to melt the ice and convert it to water at 0°C is:

= Q

= m x ΔHf

= m x 334 J/g

For example, if you have 0.5 kg of ice, the amount of energy required to melt it and convert it to water at 0°C is:

= Q

= 0.5 kg x 334 J/g

= 167 J

To know more about heat please refer: https://brainly.com/question/19383299

#SPJ4

False. No central carbon is bonded to two additional carbons in aldehydes.

The carbon atom in every member of the category of organic compounds called as an aldehyde has three single bonds, one with hydrogen, another with oxygen, and the one with another atom as well as a group of atoms (marked "R" in standard chemical formulae & structure diagrams).

A carbonyl group is joined to the carbon atom there at end of the carbon chain to form an organic molecule known as an aldehyde. An organic molecule known as a ketone is one in which a carbonyl group is joined to the carbon atom with in carbon chain.

To know more about aldehyde visit :

https://brainly.com/question/1792281

#SPJ4

If only cof2 is present at a concentration of 2.00 m at the start, the equilibrium concentration of cof2 is 0.388 M.

Kc=[CO2][CF4]/[COF2]2

let [CO2] = [CF4] = x

then [COF2] = 2.00 - 2x

[tex]\frac{x^{2} }{(2.00-2x) ^{2}}[/tex]=4.30

x=0.806

concentration of [COF2] = 2.00 - 2x = 0.388 M

Equilibrium is a state in a process in which the observable properties such as color, temperature, pressure, concentration, and so on do not change.

The word equilibrium means 'balance,' implying that a chemical reaction represents a balance between the reactants and products involved in the reaction. The equilibrium state is also observed in certain physical processes, such as the melting point of ice at 0°C, where both ice and water are present.

The equilibrium associated with physical processes such as solid melting, salt dissolution in water, and so on is known as physical equilibrium, whereas the equilibrium associated with chemical reactions is known as a chemical equilibrium.

Learn more about Equilibrium here:

https://brainly.com/question/29359870

#SPJ4

The complete question is:

2COF2(g)⇌CO2(g)+CF4(g), Kc=4.30

If only COF2 is present initially at a concentration of 2.00 M, what concentration of COF2 remains at equilibrium?

Factors such as the lack of arable land and the scarcity of water make agriculture less productive in India.

India has a large area of degraded and infertile land, which limits the ability of farmers to produce crops. Soil degradation is caused by factors such as deforestation, overgrazing, and soil erosion.

India is facing an increasingly serious water shortage, which affects agriculture in many regions. Lack of access to water for irrigation is a major limiting factor for crop production.

Learn more about Agriculture in India:https://brainly.com/question/30095494

#SPJ1

When calcium reacts with water to form calcium hydroxide and hydrogen in the balanced equation for this reaction, then the coefficient of hydrogen will be 1.

Calcium is a chemical element having symbol Ca and its atomic number will be 20. As an alkaline earth metal, calcium is a very reactive metal that forms a dark oxide-nitride layer when it is exposed to air. Its physical as well as chemical properties are most similar to its heavier homologues strontium and barium. It is the fifth most abundant element in Earth's crust, and the third most abundant metal, after iron and aluminum.

The balanced chemical equation for the reaction of calcium with water to form calcium hydroxide and hydrogen is:

Ca + 2H₂O → Ca(OH)₂ + H₂

In this equation, the coefficient of hydrogen (H₂) is 1.

To know more about  calcium here

https://brainly.com/question/4023397

#SPJ4

There are three NMR signals present in the given isomer of dimethylcyclopropane.

The number of NMR signals is defined as the number of different types of protons in a molecule. NMR signal is the example we used in the introduction to NMR spectroscopy. The spectrum has five signals which basically indicates five types of different protons.

The given compound is shown in Fig(i).

The name of the compound is (1R, 2R)-1,2- dimethylcyclopropane.

The above molecule has plane of symmetry which is shown in Fig(ii).

So, the given molecule has three types of protons. The denotation of three types of protons are shown in Fig (iii).

Hence, the number signals is three.

Learn more about NMR signals from the link given below.

https://brainly.com/question/29885193

#SPJ4

A liquid to be used in the determination of the volume of a solid by the displacement method, the criteria must be met are that the the liquid is less dense then the volume and the liquid cannot dissolve in water can't react with a solid.

1. Kinetic energy should be completely eliminated from the sample.

2. The temperature of the sample should ideally reach the corresponding freezing point.

3. The particles in the sample must be absolutely deprived of certain energy. This is done so that the attraction of the molecules in the sample for one another exceeds the force that usually separates them.

Process of Freezing:

All the particles are in clusters.  This process is referred to as freezing.

Learn more about Freezing here:

brainly.com/question/24314907

#SPJ4

The mixture is categorized as a saturated solution. It is said that the solution is in equilibrium.

A solvent is a substance that contains as much solute as is actually capable of breaking down under the conditions within which it is expressed. By examining components and the solution's characteristics, one can understand how a mixture can reach a condition of absorption.

At some time, the solution reaches its saturation point. This suggests that perhaps if you add more of the chemical, it might prevent dissolving as well as stay solid. The frequency depends on the molecular interactions between the solution and the molecule.

To know more about saturated solution visit:

https://brainly.com/question/1851822

#SPJ4

When we  are given a compound with the formula MCl2, in which M is a metal which has 28 electrons then the metal is Nickel (Ni).

Given the number of electrons is  = 28

We know that the presence of number of electrons indicate the atomic mass of an element. So, here the 28 electrons represents Nickel element. The metal "M" is described as having the formula "MCl2," which indicates that it has a charge of +2 since each chlorine atom has a negative charge. It is evident that this metal previously had 28 electrons, having lost 2 of those electrons. As far as the periodic table is concerned, a metal with the atomic number 28 was studied because an atom that has 28 electrons in a neutral state must also have 28 protons, and protons are what give an atom its atomic number. As a result, the periodic table identifies nickel as the metal with atomic number 28.

To learn more about nickel click here https://brainly.com/question/15027126

#SPJ4

A metal bar weighs 196 lbs, if the bar is 72% iron, 18% chromium, and 10% nickel, the weight of iron (in g) in the bar is 2953.2 gm.

To calculate the weight of iron in the metal bar, use the following equation:

= Weight of Iron (g)

= (Weight of Bar (lbs) x Percent Iron (fraction)) / (Molecular Weight of Iron (g/mol))

For iron, the molecular weight is 55.85 g/mol.

Therefore, the weight of iron in the bar is:

= Weight of Iron (g)

= (196 lbs x 0.72) / 55.85 g/mol

= 2,953.2 g

To know more about metal please refer: https://brainly.com/question/29404080

#SPJ4

Before the addition of a sample or solvent to a separating funnel, we must have a funnel in the top of the separatory funnel along with a stopcock in the closed position and definitely a flask under the separatory funnel.

A separatory funnel must  be vented to make sure that there is no gas buildup. It could unintentionally push the liquid or stopper out of the funnel.

The separatory funnel should be turned in gently while holding the stopper. The pointed end points upward and away from any persons or significant laboratory apparatus.

To protect the analyst from solvent vapor exposure, the separatory funnel needs to be vented into a hood. 7.6 At least 10 minutes should pass while the organic layer separates from the aqueous phase.

To learn more about separatory funnel:

brainly.com/question/14504717

#SPJ4

Note that the three types of plate boundaries are:

The geological features that can occur in each type of boundary are given as follows:

1) Divergent plate boundaries occur when plates move apart and magma rises to the surface to form new crust. A geologic feature that occurs at a divergent plate boundary is a mid-ocean ridge.

2) Note that convergent plate boundaries occur when plates collide and one plate is forced beneath the other, into the mantle. A subduction zone is a geologic feature at a convergent plate boundary.

3) In the case of transform plate boundaries, it occurs when plates slide past each other along a transform fault. A geologic feature that occurs at a transform plate boundary is a strike-slip fault.

Learn more about Plate Boundaries;
https://brainly.com/question/29712139
#SPJ1

Answer: .00829 atm

Explanation:

1 atm is = 101325 Pa

Take 840 Pa and divide by 101325

840 Pa = .00829 atm

Tyrosine should be in its neutral (unprotonated) form at pH 7, according to expectations.

One of the 20 standard amino acids that cells need to create proteins is L-tyrosine, also known as tyrosine or 4-hydroxyphenylalanine. It is a polar side-grouping non-essential amino acid. As the cheese-derived protein casein was originally identified by German scientist Justus von Liebig in 1846, the name "tyrosine" is derived from the Greek word tyrós, which means "cheese." When referred to as a functional group or side chain, it is referred to as tyrosyl. Tyrosine is more hydrophilic than phenylalanine, despite the fact that it is traditionally categorised as a hydrophobic amino acid. The messenger RNA codons UAC and UAU are responsible for encoding it.

learn more about tyrosine Refer:brainly.com/question/14514170

#SPJ4

complete question:Tyrosine is an amino acid whose side chain has a pKa of 10.1. At pH 7, what protonation form would you expect to find it in?

a.) protonated

b) unprotonated

The new volume of the gas is 832.5 ml assuming the moles of gas and temperature are held constant

Since the temperature and number of moles of gas are held constant, the pressure-volume relationship of the gas follows Boyle's Law, which states that the pressure and volume of a gas are inversely proportional at constant temperature.

the gas in a 275.0 ml piston experiences a change in pressure from 1.00 atm to 3.10 atm.

P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.

V2 = V1 * P1 / P2

= 275.0 ml * 1.00 atm / 3.10 atm

= 832.5 ml

hence, The new volume of the gas is 832.5 ml.

Learn more about volume here:

https://brainly.com/question/13338592

#SPJ4

Five bonds can be formed at maximum by phosphorus .

Atoms are held together to form molecules by chemical forces called bonds. The positively charged protons and neutral neutrons that make up an atom's nucleus are encircled by a cloud of negatively charged electrons.

Phosphorus is a trivalent element because it may make up to five bonds with other elements. Each phosphorous atom has three valence electrons in its most prevalent oxidation state of 3, which it can employ to create bonds with other elements. As a result, phosphorous atoms can create bonds with as many as three additional atoms. However, in specific circumstances, phosphorus can create more bonds by enlarging its valence shell with the help of its d-orbitals. For instance, there are five bonds altogether between each phosphorous atom and the three hydrogen atoms that make up the complex phosphine (PH3).

To know more about bonds, visit:

https://brainly.com/question/10777799

#SPJ4

Carbon-14 has a half life of 5730 years. So, approximately 5530 years have passed when 1/4th of the original amount of carbon-14 remains.

The number of years that have passed when 1/4 of the original amount of carbon-14 remains can be determined by using the equation for radioactive decay:

N = N0 * [tex](1/2)^{(t/T)}[/tex]

where,

N = the amount of radioactive isotope at time t,

N0 = the initial amount of radioactive isotope,

t = the time that has passed,

T = the half-life of the isotope.

Setting N equal to N0 / 4 and solving for t:

t = T * ln(2) * ln(N0/N)

Plugging in the known values:

T = 5730 years, N0 = N0, N = N0 / 4

t = 5730 * ln(2) * ln(N0/N0 / 4)

t = 5730 * ln(2) * ln(4)

t = 5730 * 0.693 * 1.386

t = 5730 * 0.961

t ≈ 5530 years

So, approximately 5530 years have passed when 1/4th of the original amount of carbon-14 remains.

Here you can learn more about the original amount of carbon-14

brainly.com/question/14220374

#SPJ4

If you have a 100% pure crystal of silicon at room temperature, the types of point defects that can form are: A. Vacancies B. Interstitials

It is possible for vacancies, where an atom is missing from its normal lattice position, and interstitials, where an atom is placed in a position between normal lattice sites, to form in a crystal.

Substitutional defects, where an impurity atom is substituted for a normal lattice atom, are not possible in a 100% pure crystal. Line defects and screw dislocations, which are defects that occur along extended lines in the crystal, are not considered point defects.

Learn more about Temperature here: brainly.com/question/11464844

#SPJ4

Complete question:

Assume you have a (theoretical) 100% pure crystal of silicon at room temperature. No impurities at all. What are the types of point defects that can form?
A. Interstitials
B. Substitutional defects
C. Vacancies
D. Line defects
E. Screw dislocations

"Fibers have a high length to width ratio," which implies that fibers are substantially longer than they are wide. Fibers, in other words, are long, thin elongated structures.

The phrase "fibers have a high length to width ratio" suggests that fibers are much longer than they are wide. Fibers, in other terms, are elongated structures having a long, thin form. Fibers have qualities that make them valuable in a variety of applications, such as the fabrication of textiles, paper, and composites, due to their high length to width ratio. Fibers having a high length to width ratio, for example, can be woven or twisted together to make strong, durable textiles.

To know more about fibers,

https://brainly.com/question/28204671

#SPJ1

The energy released in the process of α-decay of U-238 into Th-234 is 4.274 MeV.

Since the binding energy released (spontaneous decay processes must be exoergic) corresponds to a loss of mass, the decay energy can be computed from the known atomic masses. The Q-value of the reaction is another name for this energy.

[tex]Q_{a}[/tex] = -931.5 ([tex]M_{Th} + M_{He} - M_{U}[/tex])

= - 931.5 (234.043 + 4.002 – 238.050) = 4.274 MeV.

Alpha particle decay typically occurs in large materials like uranium. A helium nucleus with two protons and two neutrons makes up an alpha particle. Thus, Uranium will lose two protons and two neutrons. U-238 contains 146 neutrons and 92 protons (238-92). It will have 90 protons and 144 neutrons if it loses 2 protons and 2 neutrons. Thorium, abbreviated Th, is the element having 90 protons and will have a mass number of 144 + 90 = 234. You will therefore be surrounded by an alpha particle and thorium-234.

To know more about alpha decay, refer:

https://brainly.com/question/29205436

#SPJ4

The Greeks made the first attempts to provide an explanation for why chemical changes take place.

French chemist Joseph Proust was the first to suggest that substances have specific chemical formulas in the late 1700s. Proust conducted numerous tests and discovered that, regardless of how he got different elements to interact with oxygen, they always did so in specific ratios.

French chemist Antoine Lavoisier's work between 1772 and 1794 led to the first major advancement in the understanding of chemical processes. Mass was discovered to be conserved in chemical reactions by Lavoisier.

To know more about chemical changes visit :-

https://brainly.com/question/29760166

#SPJ4

The concentration after 0.0120 s is 0.808 m

The decomposition of C4H8, occurring in a first-order reaction, is characterized by a rate constant of [tex]85.0 s^{-1[/tex], resulting in the formation of two molecules of C2H4.

The rate of the reaction is dependent on the concentration of the reactant, C4H8, following a specific mathematical relationship. This relationship, represented by the rate equation,

d[C4H8]/dt = -k[C4H8], expresses the change in concentration over time, where k represents the rate constant.

By solving the differential equation, [C4H8] = [C4H8]0 * [tex]e^{(-kt)}[/tex], with the initial concentration of C4H8, [C4H8]0, equal to 2.20 m and t equal to 0.0120 s, we can determine the concentration of C4H8 after that specific time interval.

Plugging in the values, we get [C4H8] = 2.20 m * [tex]e^{(-1.02)}[/tex] = 0.808 m.

Thus, the reaction, with its unique rate constant and mathematical relationship, transforms the initial concentration of C4H8 into a new concentration, exhibiting the dynamic nature of chemical reactions.

To learn more about decomposition:

https://brainly.com/question/14608831

#SPJ4

In the Kinetics of an Iodine Clock Reaction procedure, the initial rate is calculated by multiplying the initial concentration of the thiosulfate ion half, and dividing by the eplapsed time as measured with a stop watch.

By performing the reaction numerous times under controlled circumstances and measuring the rate of the reaction in each instance, the values of these reaction orders can be determined using the method of starting rates. With the exception of one reactant's concentration, all variables are maintained constant from one run to the next.

When enzyme and substrate concentrations are known, the original rate of the reaction can be compared fairly with new enzyme or substrate concentrations.

The reaction will not go forward as quickly if there is inadequate enzyme since the reaction will occupy all of the active sites. The reaction might be sped up by adding more active sites. The pace of reaction accelerates as enzyme concentration rises.

To know more about iodine visit:

https://brainly.com/question/16944311

#SPJ4

c. No, it is not enthalpy favored since the chemical system gains energy.

An endothermic reaction occurs when ammonium nitrate dissolves in solution. As the ammonium nitrate breaks, heat energy from the environment is absorbed, causing the area to feel cold.

NH4NO3(s) = NH4 + (aq) + NO3 (aq) H = +28.

Because the reaction is endothermic, meaning it takes energy from the surroundings in the form of heat, the beaker turns cold when ammonium nitrate is mixed with water. As a consequence, the endothermic reaction of hydrating ammonium nitrate leads the beaker to become cold.

A solute in a gaseous, liquid, or solid phase could dissolve in a solvent to produce a solution through to the process of dissolution.

Learn more about ammonium nitrate here:

brainly.com/question/11978995

#SPJ4

The tractor's velocity would be 0.3 m/s.

The velocity of a moving object is the speed of the object in a specific direction. The speed of an object in itself is the ratio of the distance covered by the object and the time spent.

Thus:

Velocity = distance/time

In this case, time = 10 minutes = 10 x 60 = 600 seconds.

Distance = 201 meters.

Velocity of the tractor = 201/600 = 0.335 m/s

To the tenth place, 0.335 = 0.3 m/s

In other words, the velocity of the tractor is 0.3 m/s.

More on velocity can be found here: https://brainly.com/question/19979064

#SPJ1