A deep blue colour develops when NH3(aq) is introduced to an aqueous solution. This proves that the NH4+ ion is present in the solution. The ammonium ion (NH4+) is created when ammonia (NH3), which functions as a base, receives a proton (H+) from water.
An odourless gas with a strong scent is called ammonia (NH3). It is one of the most significant and often used chemicals in industry, and it is utilised in the creation of cleaning goods, fertilisers, and refrigerants. Nitric acid, which is used to make explosives, colours, and synthetic fibres, is produced using ammonia as a crucial step. Ammonia is a gas at normal temperature, but under pressure it can be easily liquefied. Ammonium hydroxide, a potent base, is formed when ammonium hydroxide, which has a high affinity for water, quickly dissolves in it. Although ammonia is harmful if inhaled in large amounts, it is an essential part of the nitrogen cycle in the Earth's atmosphere, playing a critical role in the growth .
Learn more about ammonia here:
https://brainly.com/question/15409518
#SPJ4
what information do we need to determine the density of the liquid sample? (select all that apply.) composition of the liquid sample volume of the liquid sample mass of the liquid sample height of the liquid sample in the container color of the liquid sample
volume of the liquid sample, composition of the liquid sample, and The data we require to calculate the liquid sample's density is the mass of the liquid sample.
The substance's density is defined as its mass per unit of volume (volumetric mass density or specific mass). Although the Latin letter D may also be used, the symbol for density that is most usually used is (the lower case Greek letter rho). Mass divided by volume gives the density value:
[tex]{\displaystyle \rho ={\frac {m}{V}}}[/tex]
where [tex]V[/tex] is the volume, is the density, and [tex]m[/tex] is the mass. Weight per unit volume is a common general definition of density, however this is wrong technically; the actual term is specific weight.
learn more about density Refer:brainly.com/question/29775886
#SPJ4
complete question: what information do we need to determine the density of the liquid sample? (select all that apply.)
a)composition of the liquid sample
b)volume of the liquid sample
c)mass of the liquid sample
d)height of the liquid sample in the container
e)color of the liquid sample
if you have 1.0 mol of each of the following compounds, which will have the greatest mass?
It implies that the messiest substance is 1.0mole of NI3. The right response is A.
Exactly whichever particle has the largest mass?Of all known elements, provides an extraordinary has the greatest atomic mass and atomic number. Only five (perhaps six) elements of the atom oganesson-294 have been found since 2005 due to the decaying atom's extreme instability.
Which mole is the mossiest?Answer and justification As a result, we can observe that a mole of sulfuric acid has the largest mass.
NI3 has a molar mass of 394.72g/mol.
H3PO4 has a molar mass of 97.99 g/mol.
KCl has a molar mass of 74.55g/mol.
FeCl3 does indeed have a molarity if 162.2 g/mol.
It implies that the messiest substance is 1.0mole of NI3. The right response is A.
To know more about greatest mass visit:
https://brainly.com/question/29227799
#SPJ4
The complete question is:
If you have 1.0 mol of each of the following compounds, which will have the greatest mass? A.) NI3 B.) H3PO4 C.) KCl D.) FeCl3
How many moles of oxygen gas are in a balloon containing 20.0 grams of pure oxygen gas?
In 20 grams of pure oxygen gas, there 0.5356 moles of oxygen gas
To calculate the number of moles of oxygen gas in a balloon containing 20.0 grams of pure oxygen gas, you can use the Ideal Gas Law equation [1]: PV = nRT.
Here, P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature. Assuming the pressure and temperature are constant, we can solve for n:
n = PV / RT
Plugging in our values, we get:
n = (1.62 atm)(10.0 L) / (0.08206 Latm/molK)(295 K)
n = 0.5356 moles of oxygen gas
Learn more about Gas law:
https://brainly.com/question/25290815
#SPJ4
which of the following is not a likely indicator of a chemical change? select the correct answer below: the formation of a precipitate a color change the change in shape of a malleable metal the release of gas without adding heat or lowering the pressure
Answer:
c the change of a shape of malleable metal
Explanation:
yes!!
cacl2 is a salt that forms as the result of what type of bond?
Ionic bonds is the reason which result in the formation of the salt CaCl2.
An ionic bond is what?Ions having opposing charges electrostatically attract one another to form ionic bonds, sometimes referred to as electrovalent bonds, in chemical molecules. Whenever the valance (outermost) electron of one atom are permanently transferred to another atom, a bond of this kind is created.
How are ions bound together?The total transfer of certain electron through one atom to that other results in the formation of an ionic connection. A negatively charged ion known as a cation results from an atom loosing one or more electrons. When an atom receives one or more electrons, it produces an anion, or negative charges ion.
To know more about ionic bond visit :
https://brainly.com/question/29772028
#SPJ4
the diels-alder reaction is one example of what type of reaction?
The Diels-Alder reaction is an electrocyclic process that involves the [4+2]cycloaddition of 2 and 4 electrons from the dienophile and 4 electrons from the conjugated diene (an alkene or alkyne).
What is a case of a Diels-Alder reaction?A conjugated diene and an alkene undergo a cycloaddition event in the Diels-Alder reaction. A 1,4-addition product is created by this reaction. The reaction of 1,3-butadiene with maleic anhydride serves as an example.
Which reaction most accurately sums up the Diels-Alder reaction?Consequently, [4+2] cycloaddition is the name given to the cyclic addition of diene and dienophile. This shows that a Diels-Alder reaction is best described by the [4+2] cycloaddition.
to know more about the diels-alder reaction here:
brainly.com/question/29972519
#SPJ4
for a zeroth-order reaction, if the concentration of reactant a is plotted vs. time, which corresponds to the slope of this plot?
The slope of a plot of concentration of reactant A versus time for a zeroth-order reaction represents the rate of reaction. In a zeroth-order reaction, the rate of reaction is constant and independent of the concentration of the reactant. Thus, the slope of the plot will be a constant value that represents the rate constant of the reaction. This means that the rate of the reaction is proportional to the negative of the slope of the plot, and the units of the rate constant will be concentration/time.
In a zeroth-order reaction, the rate of reaction is directly proportional to the concentration of reactant and is independent of time. If we plot the concentration of reactant "a" against time, the slope of this plot will correspond to the rate of the reaction at that particular time. The slope will be negative, indicating that the concentration of reactant is decreasing as time passes. The magnitude of the slope will reflect the speed of the reaction and how quickly the reactant is disappearing. Zeroth-order reactions have a constant rate, and the slope of the plot will remain the same, regardless of the concentration of the reactant. This makes zeroth-order reactions useful in applications such as drug kinetics, where the rate of reaction is a critical factor.
Learn more about zeroth-order reaction here: brainly.com/question/30032870
#SPJ4
8. explain why sometimes you would want to use a broth while other times you would prefer a solid medium.
Because solid medium promotes colony formation for the cultivation of microorganisms. whereas for the growing of discerning microorganisms and the upkeep of stock cultures, broth is appropriate.
An organism's amount of oxygen need can be seen in broth media. Anaerobes that must exist will develop at the bottom. Aerobes must-haves will increase at the top. Anaerobes that are facultative will proliferate throughout the medium, but predominantly near the top. Microaerobes won't grow at the surface; they'll grow upward. Bacteria that are aerotolerant will spread evenly throughout the soup.
Microorganisms can be grown on two different types of growths: nutrient agar and nutrient broth. The fundamental distinction between nutrient broth and nutrient agar is that the latter is a liquid media, whilst the former is a solid. To make the nutrient agar more stable, agar is added to it. It is a galactose-based polymer. Because it promotes colony formation, nutrient agar is ideal for the cultivation of microorganisms. For the growing of discerning microorganisms and the upkeep of stock cultures, nutrient broth is appropriate. In comparison to nutrient broth, which is prepared in test tubes or bottles, nutritional agar is prepared in Petri dishes.
For more such questions on broth medium , Refer:
https://brainly.com/question/12915838
#SPJ4
2nh3 3cuo -> 3cu n2 3 h2o how many moles of n2 can be made when 108.1 grams of cuo are consumed
1008 moles of n2 can be made when 108.1 grams of CUo are consumed.
What are moles?
A mole is just a measuring scale. In reality, it's one of the International System of Units' seven foundation units (SI). When already-existing units are insufficient, new ones are created. The levels at which chemical reactions frequently occur exclude the use of grammes, yet utilising absolute numbers of atoms, molecules, or ions would also be unclear. To fill this gap between extremely small and extremely huge numbers, scientists created the mole. A mole must be specified or be based on something reproducible, like all other units. The number of atoms in a sample of the isotope carbon-12 was once the basis for the current definition of the mole, which is now based on other factors.
108 mol CuO x (1 mol N2 / 3 mol CuO) = 36 moles of N2.
36 mol N2 x (28 g N2 / 1 mol N2) = 1008 grams of N2.
To learn more about moles visit;
https://brainly.com/question/20486415
#SPJ4
The chemical behavior of an atom is determined by the?
The chemical behavior of an atom is determined by the distribution of electrons in the atom's electron shells.
Electron shells are energy levels surrounding an atom's nucleus, where electrons are found. The number of electron shells is determined by the atomic number of the element. Each shell has a set number of electrons that it can hold, with the first shell holding two electrons, the second holding eight, and the third and subsequent shells holding 18 electrons each. The electron shells are arranged in an organized manner, with electrons filling the lower energy levels before moving to higher energy levels. When an electron is excited, it moves to a higher energy level, creating an electron shell configuration known as an excited state.
Electrons in the outermost shell are called valence electrons, and they play a crucial role in chemical reactions. The arrangement of electrons in electron shells helps determine an element's chemical properties, including its reactivity, melting point, and boiling point. In summary, electron shells are an important aspect of atomic structure that plays a significant role in determining an element's behavior in chemical reactions.
To learn more about Electron shells visit here:
brainly.com/question/24378707
#SPJ4
a certain reaction has an activation energy of 70.81 kj/mol. at what kelvin temperature will the reaction proceed 4.50 times faster than it did at 365 k?
387.27 K temperature will the reaction proceed 6.00 times faster than it did at 337 K.
k2 is 6 times k1 and hence k2/k1 = 6
we have ln(k2/k1) = Ea/R (1/T1- 1/T2)
ln(6) = 38670/8.314 x( 1/337 -1/T2)
0.00038522 = (1/337 -1/T2)
1/T2 = 0.0033525
T2 = 387.27 K
In chemistry and physics, activation electricity is the minimal amount of electricity that has to be supplied for compounds to result in a chemical reaction. The activation energy of a reaction is measured in joules per mole, kilojoules in keeping with mole, or kilocalories consistent with mole.
Activation strength is described as the minimum quantity of strength required via a reacting molecule to get transformed into a product. it may additionally be defined because the minimal amount of energy had to prompt or energize molecules or atoms in an effort to go through a chemical reaction or transformation. In transition-state theory, activation electricity is the distinction in electricity content material between atoms or molecules in an activated or transition-country configuration and the corresponding atoms and molecules in their initial configuration.
To learn more about Activation energy visit here:
brainly.com/question/28384644
#SPJ4
Complete Question:
A certain reaction has an activation energy of 38.67 kJ/mol. At what Kelvin temperature will the reaction proceed 6.00 times faster than it did at 337 K?
selenium has 6 electrons in its outermost shell. how many electrons does it need to gain in order to have a full and stable outermost electron shell
In order to achieve the stable electron configuration, the selenium atom obtains two electrons and adopts the Krypton configuration.
The sulfur family, which also comprises selenium, includes tellurium and polonium. Six electrons make up the outermost shell of this family. Particularly for selenium, the electron configuration is 2-8-18-6. Due to the fact that selenium has six electrons in its outermost shell, it can have a variety of valence values. In order to produce its most stable ion, a selenium atom (Se) would gain two electrons.
Since selenium is a member of the oxygen family, often known as group 16, it contains six valence electrons. It searches for two additional electrons to have a whole outer shell of eight electrons.
To know about electrons
https://brainly.com/question/1255220
#SPJ4
True or False: Diamonds and Cubic Zirconia are similiar but made of different atoms. Diamonds are made of the atom, Carbon, and Cubic Zirconia does not have a single carbon atom in its chemical formula.
Answer:
True
Explanation:
place the iron block on top of the heater and turn on the heat
where are the energy symbols going and what does this represent
the energy symbols are ______ and this represents ______
The energy symbols of heat relating to thermal energy are Q and this represents heat.
What is thermal energy?Thermal energy is defined as a type of energy which is contained within a system which is responsible for temperature rise.Heat is a type of thermal energy.It is concerned with the first law of thermodynamics.
Thermal energy arises from friction and drag.It includes the internal energy or enthalpy of a body of matter and radiation.It is related to internal energy and heat .It arises when a substance whose molecules or atoms are vibrating faster.
Learn more about thermal energy,here:
https://brainly.com/question/3022807
#SPJ1
if the small amount of mns is combined with the large amount of hcl, what is the mass of the products? the mass of any excess reactants will also be included in this total.
The reaction between a small amount of MnS and a large amount of HCl will form MnCl2 and H2S. total mass of the products will be 4Xg
The balanced chemical equation for the reaction between MnS and HCl is:
2 MnS + 4 HCl -> 2 MnCl2 + H2S
Let's assume the amount of MnS used in the reaction is x g.
Using stoichiometry, the amount of HCl required can be calculated as 4x g.
The amount of MnCl2 formed will be 2x g and the amount of H2S formed will be x g.
So, the total mass of the products will be 2x + x + x = 4x g.
Note: The value of x can be determined from the experiment or given in the problem. The mass of any excess reactants will also be included in the total mass of products.
Learn more about mass here:
https://brainly.com/question/19694949
#SPJ4
for a saturated aqueous solution of n2(g) at 20 oc and 1 atm, will the solubility increase, decrease or not change when the indicated change occurs? (1) the solubility of n2(g) decreases when pressure decreases. (2) the solubility of n2(g) decreases when temperature increases.
Both an increase in temperature and a decrease in pressure will lead to a decrease in the solubility of N2(g) in a saturated aqueous solution.
Solubility Factors-
For a saturated aqueous solution of N2(g) at 20°C and 1 atm, the solubility of N2(g) will decrease when the temperature increases and will also decrease when the pressure decreases.
(1) The solubility of a gas in a liquid is directly proportional to the pressure of the gas above the liquid. According to Henry's Law, the solubility of a gas in a liquid is proportional to the pressure of the gas above the liquid, so when the pressure decreases, the solubility of N2(g) will decrease.
(2) The solubility of a gas in a liquid decreases with increasing temperature. As the temperature of a solution increases, the solubility of gases in the solution decreases. This is because the increased temperature increases the kinetic energy of the gas molecules, allowing them to escape more easily from the solution into the gas phase.
To know more about solubility factor, checkout
https://brainly.com/question/30486016
#SPJ4
a solution of known concentration can be prepared is a sample of a pure solute can be accurately weighed. what is the name for this type of solution?
A solution prepared by accurately weighing a pure solute is called a "Stock Solution."
The degree to which the average value of an object's displayed weight is near to the object's actual weight is a measure of a scale's accuracy. A scale is accurate to within 0.20 lb in 200 lb, or 0.1%, if it shows that a 200 lb reference weight weighs 200.20 lb on average.
To make a stock solution, weigh out the proper amount of a pure solid or measure out the proper amount of a pure liquid, put it in the right flask, and then dilute it to the desired volume. Depending on the intended concentration unit, many methods can be used to measure the reagent.
For such more question on Stock Solution
https://brainly.com/question/24697661
#SPJ4
most metals semiconductors and ceramics have a crystalline structure in which the atoms or ions display short range order true false
The given statement is true. Most metals semiconductors as well as ceramics have a crystalline structure in which the atoms or ions display short range order.
Semiconductor: A semiconductor is a substance that has specific electrical properties which enable it to serve as a foundation for computers as well as other electronic devices. It is typically a solid chemical element or compound which conducts electricity under certain conditions but not others.
In a crystalline solid, the atoms or ions are arranged in a repeating pattern, giving the material long-range order and stability. This is what gives crystalline solids their characteristic mechanical and thermal properties. The short-range order refers to the arrangement of atoms or ions within individual crystal lattice unit cells, while the long-range order refers to the arrangement of unit cells across the entire solid.
To know more about semiconductor here
https://brainly.com/question/18132856
#SPJ4
stomach acid has a ph of about 2.0, and blood has a ph of 7.4. (a) what are their hydrogen-ion concentrations?
About 250 thousand times greater is the hydrogen-ion concentration of stomach acid than that of blood.
In chemistry, awareness is the abundance of a constituent divided by using the whole extent of an aggregate. several styles of mathematical description can be outstanding: mass concentration, molar awareness, quantity concentration, and volume awareness.
In technology, the amount of a substance, which includes salt, this is in a positive amount of tissue or liquid, along with blood. A substance becomes more concentrated while much less water is present. The concentration of the solution may be expressed in molarity, molality, normality, mole fraction, and many others. the attention of a substance is the amount of solute present in a given quantity of answer. Concentrations are commonly expressed in phrases of molarity, defined as the variety of moles of solute in 1 L of answer.
To learn more about Concentration visit here:
brainly.com/question/10725862
#SPJ4
Complete Question:
Stomach acid has a pH of about 2.0, and blood has a pH of 7.4. How many times greater is the hydrogen-ion concentration of stomach acid than that of blood?
In the arrhenius equation, the collision frequency and molecular orientation are incorporated in the value of?
The collision frequency and molecular orientation are incorporated in the value of the activation energy (Ea) in the Arrhenius equation.
The Arrhenius equation is a mathematical expression that describes the temperature dependence of reaction rates. It states that the rate constant (k) of a chemical reaction is directly proportional to the frequency of successful collisions between reacting molecules, and is given by the equation:
k = Ae^(-Ea/RT),
where A is the pre-exponential factor, Ea is the activation energy, R is the gas constant, and T is the temperature in Kelvin.
This equation predicts that as the temperature increases, the reaction rate will also increase due to the increase in collision frequency and molecular orientation, which are both incorporated in the activation energy (Ea).
Learn more about Arrhenius equation here: https://brainly.com/question/13467424
#SPJ4
Describe the differences between renewable and
nonrenewable energy sources, and give an example
of each.
Renewable resources or energy can naturally regenerate themselves, whereas nonrenewable resources cannot, which is how these two types of resources vary from one another. This translates to the fact that nonrenewable resources are scarce and cannot be used sustainably.
Examples of Nonrenewable energy resourcesExamples of Nonrenewable energy resources include coal, natural gas, oil, and nuclear energy.
Examples of renewable energy resourcesExamples of renewable energy resources include wind power, solar power, bioenergy and hydroelectric.
Resources that are renewable cannot be exhausted over time. Non-renewable resources eventually run out. Nonrenewable energy is not seen as sustainable or renewable over the long run since it takes a very long time to develop.
Learn about energy here https://brainly.com/question/13881533
#SPJ1
the solubility of nach3co2 in water is ~1.23 g/ml. what would be the best method for preparing a supersaturated nach3co2 solution? group of answer choices
The best method for preparing a supersaturated NaCH₃CO₂ solution would be by adding 1.23 g of NaCH₃CO₂ to 200 ml of water at 80 °C while stirring until all the solid dissolves, and then letting the solution to cool at room temperature.
The solubility of a solute in a solution depends upon its concentration.
Given that, the solubility of NaCH₃CO₂ at 80 °C is ~1.23 g/ml. So, If we add 1.23 g of solute at 80 °C and let it cool down slowly without any perturbation, then the resulting solution at room temperature will have a concentration of 1.23 g/200 ml = 0.00615 g/m, which is a supersaturated solution.
To know more about supersaturated solution here
https://brainly.com/question/14222320
#SPJ4
what is the strongest intermolecular attraction that you would expect to have in a pure sample of this compound?
The strength of intermolecular attractions in a pure sample of a compound is determined by several factors, including the size, electronegativity, and polarity of the molecules.
The strongest type of intermolecular attraction is usually hydrogen bonding, followed by dipole-dipole interactions and London dispersion forces.
In order to determine the strongest intermolecular attraction for a specific compound, it is necessary to have information about the chemical structure and properties of the molecules. For example, if the compound contains polar bonds or highly electronegative elements such as nitrogen and oxygen, then hydrogen bonding may be the strongest intermolecular attraction. On the other hand, if the compound contains non-polar bonds or non-polar elements such as carbon and hydrogen, then London dispersion forces may be the strongest intermolecular attraction.
It is important to note that the strength of intermolecular attractions can affect a variety of physical properties, including boiling point, surface tension, and viscosity, among others. Understanding the strength and type of intermolecular attractions in a compound is important for predicting its behavior and properties.
Learn more about intermolecular attractions:
brainly.com/question/10626096
#SPJ4
what is the difference between hydrogen peroxide and rubbing alcohol?
They can be killed by alcohol in 10 seconds. The antibacterial, or disinfectant, that eliminates viruses and different types of bacteria is oxygen gas.It takes longer than rubbing alcohol to destroy bacteria.
Which of the 4 forms of alcohol are they?The four different forms of alcohol are rubbing, isopropyl, denatured, and ethyl. Ethyl alcohol, commonly known as ethanol or grain alcohol, is the one that we are most familiar with and adore.
Is alcohol beneficial to the body?Although many drink in moderation, other people don't. The effects of heavy drinking might be felt physically. It can result in liver scarring (cirrhosis), a potentially lethal condition, and liver inflammation (alcoholic hepatitis). Both blood pressure and cardiac muscle damage may result from it (cardiomyopathy).
To know more about Alcohol visit :
https://brainly.com/question/16975086
#SPJ4
CaCl2 is a salt that forms as the result of what type of bond?
A. covalent
B. hydrogen
C. polar
D. non-polar
E. ionic
The offered statement claims that CaCl2 is a salts that develops as a result of an ionic connection.
Who or what uses CaCl2?An ionic substance called calcium chloride is prescribed to treat hypocalcemia and hyperkalemia as well as to treat calcium intoxication brought on by taking too much magnesium sulfate. This ionic compound calcium chloride is created when limestone and chlor interact. It is extremely insoluble in water or deliquescent.
What distinguishes calcium chloride from bleach?a strong oxidizing disinfectant that is a fine white powder. Chlorine gas is passed through slaked lime to create calcium chloride chlorine ions. In water, it breaks down and releases chlorine. Some industrial bleaching powders are made by combining calcium hypochlorite plus calcium chloride physically.
To know more about CaCl2 visit:
https://brainly.com/question/11907168
#SPJ4
At conditions of Standard Temperature and Pressure, determine how many liters of hydrogen gas are produced by placing a zinc nail with a mass of 2.2g into an excess of hydrochloric acid. A) 0.0015 L B) 0.75 L C) 1.33 L D) 6.42 L
According to the argument, 0.75 L of hydrogen is produced when a 2.2g zinc nail is added to an excess of hydrochloric acid.
Where is hydrogen found?It is present in the majority of stars, including the sun, and makes up the majority of Jupiter's surface. The most h on Earth is found in water. Its presence in the air as a gas is limited to less than 1% of the volume.
Is water H2O or hydrogen?Hydrogen has the molecular formula H2 and a molecular formula of 1. The first isotope as among exceed belongs to hydrogen, which is represented by the character H. It is a highly flammable, tasteless, and odorless gas.
Zn + 2HCl → ZnCl2 + H2
moles = mass / molar mass
The molar mass of zinc is 65.38 g/mol, so the number of moles of zinc is:
moles = 2.2 g / 65.38 g/mol = 0.0337 moles
liters = 0.01685 moles * 22.4 liters/mole = 0.375 liters = 375 mL
So, the answer is (B) 0.75 L.
To know more about hydrogen visit;
https://brainly.com/question/16979348
#SPJ4
What does a folded polypeptide indicate?
The form of the complete folded polypeptide is referred to as the tertiary structure. Dipole-dipole interactions and hydrogen bonds between polar amino acids are what allow this structure to emerge.
Are polypeptides a kind of protein?These amino acids are arranged in a long chain and joined to one another by covalent peptide bonds to form proteins. Polypeptides are another name for proteins. The amino acid sequence found in every kind of protein is distinct and identical from one protein to the next.
The function of polypeptidesPolypeptides. Proteins are created by joining several amino acids together to form polypeptides. The combining of four or more glycoprotein results in the formation of proteins, which are then pleated into the appropriate shape.
To know more about polypeptide visit:
https://brainly.com/question/12729146
#SPJ4
5. a student measured the temperature of boiling water to be 105.25 oc. the correct temperature for boiling water is 100.00 oc at 1 atm. what went wrong in the experiment?
There are several possible sources of error, including incorrect calibration of the thermometer, incorrect atmospheric pressure, or incorrect measurement of the temperature.
Calculation:
The difference between the measured temperature (105.25 °C) and the correct temperature (100.00 °C) can be calculated as follows:
105.25 °C - 100.00 °C = 5.25 °C.
This difference indicates that there was an error in the experiment. To determine the cause of the error, it is necessary to examine the entire experimental setup, including the thermometer, atmospheric pressure, and temperature measurement process. For example, if the thermometer was not calibrated correctly, the measured temperature would not be accurate. If the atmospheric pressure was not at 1 atm, the boiling point of the water would be different than 100.00 °C. If the temperature measurement was not taken correctly, the recorded value would not be accurate. By examining all potential sources of error, the student can determine what went wrong in the experiment and take steps to correct the problem for future experiments.
Learn more about temperature here:
https://brainly.com/question/11464844
#SPJ4
when sugar is added to water, what is the change observed in the boiling and freezing points of water? select one: a. boiling point increases and freezing point decreases. both boiling point and freezing point increases. c. both boiling point and freezing point decreases. the. boiling point decreases and freezing point increases.
Answer:
A
Explanation:
what is Fission
splitting a nucleus into smaller nuclei?
or
putting two nuclei together to form a larger nucleus?
Nuclear fission is the process of splitting of a heavy unstable nucleus into two smaller nuclei. Hence, first option is correct.
What is nuclear fission ?There are many unstable radioactive isotopes which undergo nuclear decay by the emission of alpha or beta particles. Sometimes a heavy unstable radioactive isotope undergo decomposition to produce two smaller nuclei. This process is called nuclear fission.
The fusing of two light nuclei to form a heavy nucleus is called nuclear fusion. Both nuclear fission and nuclear fusion releases tremendous energy to the surroundings.
Nuclear fusion is the source of light and heat energy in sun and other stars. Fusion releases higher energy than fission. Nuclear fission is used in atom bombs.
Find more on on nuclear fission:
https://brainly.com/question/29141330
#SPJ1