when an aldehyde is treated with lialh4 followed by addition of h2o, what general class of product results?

Since liquids are frequently flammable, they will transition into the vapor phase when the temperature is raised high enough.

The total vapor pressure above a mixture of two volatile liquids can be forecast using Raoult's law. In fact, the more volatile molecule will have a larger mole fraction in the vapor phase than in the liquid phase, resulting in a composition of the vapor that differs from that of the two liquids.

Condensation is the term for this action. The pressure exerted by a vapour with its condensed phases (solid or liquid) in a closed system at a specific temperature is referred to as vapour pressure, also known as vapour equilibrium pressure.

The partial pressures of the constituents dictate the composition of the vapour phase in equilibrium with the solution.

To know about liquid phase

https://brainly.com/question/20302012

#SPJ4

The correct answer is

The 8.48 X 10^-24 atoms/cm^3 of Fe particles are present.

A solid will have a certain density at ambient temperature and atmospheric pressure. The material's mass per unit volume is used to determine density. You may calculate it by dividing the object's total mass, M, by its total volume, V: =M/V. Simply said, solid masses have a high density due to the close proximity of their particles, liquid masses have a little lower density, and gas masses have a very low density due to the distance between their particles.

To learn more about solid density click the link below

brainly.com/question/162369

#SPJ4

The molecular formula for a polymer made by linking three fructose molecules [tex]C_6H_{12} O_6[/tex] together by a dehydration synthesis reaction is n[tex]C_6H_{12} O_6[/tex], where n represents the number of fructose units in the polymer.

The dehydration synthesis reaction between three fructose molecules forms a glycosidic bond, which eliminates a molecule of water and results in the formation of a single molecule with three fructose units. The molecular formula for the polymer will depend on the number of fructose units linked together, but in general, the molecular formula for a polymer made by linking multiple fructose molecules together will be n [tex]C_6H_{12} O_6[/tex], where n represents the number of fructose units in the polymer.

Learn more about fructose here

brainly.com/question/28117000

#SPJ4

Answer:

3.53 g/mL

Explanation:

to start this we need to find the displacement volume which we do by subtracting 36.4-32.3= 4.1 mL then we can plug in these numbers to the density formula p=m/v where m=14.5 and v=4.1

14.5/4.1 = 3.53 g/ml

The density of the metal in the given problem is calculated by dividing its given mass (14.5g) by the volume displacement in the graduated cylinder (4.1ml). The calculated density of the metal is approximately 3.54 g/ml.

To determine the density of the metal, we need to use the formula density = mass/volume. In this case, the volume of the metal can be found by subtracting the initial water volume in the graduated cylinder from the final volume - so 36.4 ml - 32.3 ml, gives us 4.1 ml for the volume of the metal. The given mass of the metal is 14.5 g. Using these numbers in our density formula, we find that the density of the metal = 14.5 g / 4.1 ml = approximately 3.54 g/ml.

https://brainly.com/question/34199020

#SPJ2

[tex]5.76 grams[/tex] of CO2 are included in 2 litres of sparkling water.

At 2.4 atm (25 °C), 2 litres of sparkling water have a capacity of 2.4 litres.

Following is the mass of CO2 in 2 litres of sparkling water:

[tex]1.10 g/ml * 2.4 atm *2.4 litres\\ \\= 5.76 g of CO2[/tex]

2 litres of sparkling water have [tex]5.76 grams[/tex] of CO2 in them.

Sparkling water and still water both hydrate. All sparkling waters, however, are not made equal. It's important to read the nutrition label before purchasing a sparkling water product since some may include extra sugars or artificial sweeteners. Dehydration can be aided by sparkling water.Chronic dehydration can result in constipation, cardiac and kidney issues, as well as digestive issues.

learn more about Dehydration Refer:brainly.com/question/28207006

#SPJ4

To find the number of moles of gas in the new volume of 650.0 ml, we need to use the Ideal Gas Law equation. Therefore, the number of moles in the new volume of 650.0 ml is 0.200 moles.

The Ideal Gas Law states that the pressure, volume, and temperature of a gas are directly proportional to the number of moles of gas present, as long as the temperature is kept constant. Mathematically, this can be represented as PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin. Since the temperature and pressure are constant in this problem, we can use the Ideal Gas Law to calculate the number of moles of gas present in the new volume.

By substituting the known values into the equation, we can solve for the new number of moles:

PV = nRT

(P)(650.0 ml) = (0.200 moles)(R)(T)

Dividing both sides by RT gives:

V = (n/P)RT

V = (0.200 moles/P)RT

V = (0.200 moles/P)(650.0 ml)

Hence, the number of moles in the new volume of 650.0 ml is 0.200 moles.

To know more about ideal gas law, visit:https://brainly.com/question/28257995

#SPJ4

A mixture has a mas of 450 grams. Of that mixture,35 grams is sulfur . Therefore, 11% is the percentage of sulfur in the mixture.

The mass percent equation is defined as the mass of each element in one mole of the compound, as well as the molar mass. With these masses, you can calculate each element's mass proportion.

In order to represent the mass percent of a solution, the kilograms of solute are divided by the kilograms of solution, and the result is multiplied by 100.

percentage of sulfur = mass of sulfur/ mass of mixture×100

mass of sulfur= 5 grams

mass of mixture =450 grams

substituting all the given values in the above equation, we get

percentage of sulfur = 5 / 450=0.011×100= 11%

Therefore,  11% is the percentage of sulfur in the mixture.

To know more about mass percentage, here:

https://brainly.com/question/28973847

#SPJ1

The point that marks the highest temperature and pressure at which it's possible to determine whether a sample of pure x is a liquid or a gas is called the critical point.

At the critical point, the substance can no longer be compressed into a liquid and expanding it does not result in vaporization. At this point, the temperature and pressure are at their highest and are called the critical temperature and critical pressure, respectively.

The critical point marks the boundary between the liquid and gas phases, and any further increase in pressure or temperature will result in a single homogeneous phase. The critical temperature and pressure are unique properties of each substance and can be used to identify and differentiate between different materials.

Learn more about critical point here: https://brainly.com/question/7805334

#SPJ4

Following are the answers:

1. 10.0 grams NaH dissolved in 2.000 kg of water:

  10.0 / (23.0 + 1.0) = 0.400 moles

   m = 0.400 moles / 2.000 kg = 0.200 m

2. 40.0 grams NaOH dissolved in 1500 grams of water:

    1500 grams = 1.500 kg

     40.0 / 40.0 = 1.000 moles

     m = 1.000 moles / 1.500 kg = 0.667 m

3.  80.0 grams NaOH dissolved in 1.000 kg of water:

    80.0 / 40.0 = 2.000 moles

    m = 2.000 moles / 1.000 kg = 2.000 m

4. 20.0 grams of NaOH dissolved in 2.000 kg of water:

   20.0 / 40.0 = 0.500 moles

    m = 0.500 moles / 2.000 kg = 0.250 m  

Molality is a measure of the concentration of a solution that expresses the number of moles of solute present in a specified mass of solvent, typically per kilogram of solvent. It is represented by the symbol "m" and is calculated by dividing the number of moles of solute by the mass of the solvent in kilograms.

Molality is commonly used in chemical and biological applications, as it provides a more accurate measure of solution concentration than other measures such as molarity, which is based on the volume of the solvent. Molality is particularly useful in situations where temperature changes could cause significant changes in the volume of the solvent, as it is independent of temperature.

Learn more about molality, here:

https://brainly.com/question/26921570

#SPJ1

The molality is an important method to calculate the concentration of a solution. The molality of the given solutions are  0.209 mol kg⁻¹, 0.66 mol kg⁻¹, 2 mol kg⁻¹ and  0.25 mol kg⁻¹.

The molality of a solution is defined as the number of moles of the solute dissolved in 1 kg of the solvent. It is usually denoted by the symbol 'm'. The equation used to calculate the molality is:

m = Number of moles of the solute / Mass in kg of the solvent

n = Given mass / Molar mass

1. 10.0 / 23.9 = 0.41 moles

m = 0.41 / 2.0 = 0.209 mol kg⁻¹

2. 40.0 / 39.99 = 1. 0 moles

m = 1.0 / 1.5 = 0.66 mol kg⁻¹

3. 80.0 / 39.99 = 2.0 moles

m = 2.0 / 1.0 = 2 mol kg⁻¹

4. 20. 0 / 39.99 = 0.50

m = 0.50 / 2.0 = 0.25 mol kg⁻¹

Thus the molality of the given solutions calculated.

To know more about molality, visit;

https://brainly.com/question/26921570

#SPJ1

The nucleus contains protons and neutrons.

A electrons

B neutrons

The correct option is A. If we triple the temperature and double the volume, what would the new pressure of the system be 20 atm.

Stress is pressure according to the unit region of the surface; the SI unit for strain is the pascal (Pa), described as 1 newton consistent with a square meter (N/m2). The pressure exerted by using an object is proportional to the force it exerts and inversely proportional to the vicinity on which the pressure is exerted.

The pressure applied is perpendicular to the floor of items per unit location. The simple system for pressure is F/A (force in step with the unit region). The unit of pressure is Pascals (Pa).  whilst sipping liquids from a straw, have you ever noticed that you honestly suck the air out of the straw at the same time as you sip the beverage, you’re honestly making use of ‘stress’. the quantity of force exerted (thrust) on a surface in step with the unit region is defined as ‘strain’. it may additionally be described as the ratio of the force to the region (over which the pressure is acting).

To learn more about Pressure visit here:

brainly.com/question/12971272

#SPJ4

The use of another person's information without properly citing and recognizing it within your own work is known as plagiarism.

In technology, the term "data" refers to information that has been formatted in a way that makes it effective for transmission / processing. Data is information that has been binary-digitally changed for usage with modern computers and transmission technologies. The topic data may be expressed in both the plural and singular forms.

Information that has been transformed it into format that can be transmitted or processing is referred to as data in computing. Data is information that has been binary-digitally changed for usage with modern computers and transmission technologies.

To know more about data visit :

https://brainly.com/question/24710783

#SPJ4

In a face-centered cubic (FCC) lattice, each unit cell has 8 corner atoms and 1 center atom. Thus, a unit cell of a FCC lattice of copper would contain 8 corner copper atoms and 1 center copper atom, giving a total of 8 + 1 = 9 copper atoms in the unit cell.

In a face-centered cubic (FCC) lattice of copper, the unit cell is made up of 8 corner atoms and a single atom in the center. Each corner atom of the unit cell is shared with 8 other unit cells and the center atom is shared with a total of 8 unit cells. Therefore, the number of copper atoms in a unit cell of an FCC lattice of copper is 8 corner atoms + 1 center atom = 9 atoms. This is a basic characteristic of FCC structures, which are very commonly found in metals and are known for their high packing efficiency and close-packed arrangement of atoms.

Learn more about Copper here: brainly.com/question/13677872

#SPJ4

The statement correctly classifies the solutions is:

The solution in the balloon is hypertonic relative to the solution in the beaker.

As per the given data a balloon that is permeable to water but not to glucose contains a 10% glucose solution.

A beaker contains a 5% glucose solution.

Here we have to determine which statement correctly classifies the solutions.

A solution which has higher solute concentration than other solution is called a hypertonic solution.

The solution with lower solute concentration than other solution is called hypotonic solution and the solutions with same solute concentration is called isotonic solution. Here the concentration of solute insolation in balloon is higher than that of concentration of solutes in the beaker solution, so relatively it is hypertonic.

The correct answer is option,

b) The solution in the balloon is hypertonic relative to the solution in the beaker.

For more questions on the glucose solution and permeability

https://brainly.com/question/14748422

#SPJ4

A balloon permeable to water but not to glucose contains a 10 % glucose solution. A beaker contains a 5 % glucose solution. Which of the following is true?

(a)When placed in the beaker, the balloon will lose water by osmosis.

(b)The solution in the balloon is hypertonic relative to the solution in the beaker.

(c)The solution in the balloon is isotonic; the solution in the beaker is hypertonic.

(d)The solution in the beaker is hypertonic relative to the solution in the balloon.

The number of subatomic particles that the isotope has is 63 protons, 63 electrons, and 90 neutrons.

Subatomic particle is a particle that composes an atom. In general, an atom can be broken down into three types of subatomic particles: protons, electrons, and neutrons.

By the question above, we are given this information:

The atomic number is the number of protons, which means that the isotope has 63 protons.

The atomic number is also the number of electrons, which means that the isotope has 63 electrons.

The number of neutrons is the mass number - atomic number, which means that the isotope has 153 - 63 = 90 neutrons.

Learn more about subatomic particle at https://brainly.com/question/9534177

#SPJ4

The mixture exerts a 100 torr total pressure.

The force applied to a surface in relation to its area is measured as pressure. The force applied to a unit of area is measured in units of force per unit of area, such as Newtons per square metre (N/m2) or pounds per square inch (psi).

A gas mixture's total pressure is equal to the sum of the partial pressures of its constituent gases. The pressure that a gas would have if it were the only one in the container is known as the partial pressure of a gas.

The sum of the partial pressures of the two gases= 70 torr + 30 torr = 100 torr ,gives the total pressure of the combination of two gases.

To know more about pressure, visit:

https://brainly.com/question/12497098

#SPJ4

Gases are most ideal at high temperature and low pressure. We can infer that intermolecular forces are to blame for the real gas's lower pressure than the ideal gas's pressure.

Helium is the actual gas that behaves the most like an ideal gas. This is due to the fact that helium, unlike the majority of gases, only consists of a single atom, which minimizes the van der Waals dispersion forces.

Helium

The real gas that acts most like an ideal gas is helium. This is because helium has the lowest possible van der Waals dispersion forces because, unlike most gases, it only contains one atom. Another feature is that, like other noble gases, helium has an entirely full outer electron shell.

An ideal gas is one whose molecular volume and molecular force ratios are both so minimal that they have no impact on the behavior of the gas.

To know more about gases visit:

https://brainly.com/question/29889106

#SPJ4

According to Gay-Lussac's law,  the temperature of the fire at 39.3 atmospheres is 1350.82 Kelvin.

It is defined as a gas law which states that the pressure which is exerted by the gas directly varies with its temperature and at a constant volume.The law was proposed by Joseph Gay-Lussac in the year 1808.

The pressure of the gas at constant volume reduces constantly as it is cooled till it undergoes condensation .It is given as, P₁/T₁=P₂/T₂, thus T₂= 295.6×39.3/8.6=1350.82 kelvin

Thus, the temperature of the fire at 39.3 atmospheres is 1350.82 Kelvin.

Learn more about Gay-Lusac's law,here:

https://brainly.com/question/1358307

#SPJ1

Scenario A represents the experimental portion of the scientific method.

In scientific research, the experimental portion of the scientific method involves collecting data through observation and experimentation. In scenario A, the student is observing and testing a chemical compound in the lab. By noticing its physical properties, such as its appearance as a powder and smell like rotten eggs, the student is gathering data. This information will then be used to make conclusions and develop hypotheses. In this scenario, the student is gathering data and making observations that will ultimately be used to test and support or refute scientific theories. The experimental portion of the scientific method is a crucial step in the scientific process and helps to increase understanding and generate new knowledge.

Learn more about scientific method here:

https://brainly.com/question/7508826

#SPJ4

Titration is a method of chemical analysis where the quantity of a sample's constituents is determined. Therefore, the concentration of the original acid is 0.0021M.

Titration is a method of chemical analysis where the quantity of a sample's constituents is determined by adding a precisely measured amount of a different substance to which the desired ingredient will react in a specific, known proportion.

A burette, which is simply a long, graduated measurement tube with a stopcock as well as a delivery tube at its bottom end, is used to gradually administer a standard solution of titrating reagents, or titrant, to a specified concentration.

HBr+ KOH→ KBr + H[tex]_2[/tex]O

moles of KOH = 0.5 ×  150/100=1.50× 0.5 =0.75moles

at equivalence,

moles of HBr = moles of KOH

moles of HBr = 0.75moles

concentration of  HBr=  0.75/ 350= 0.0021M

Therefore, the concentration of the original acid is 0.0021M.

To learn more about titration, here:

https://brainly.com/question/13307013

#SPJ1

The atomic symbol format "xza" consists of three components:

X: The element's chemical symbol, which is typically a one- or two-letter abbreviation of the element's name.

Z: The atomic number of the element, which is the number of protons in its nucleus.

A: The atomic mass of the element, which is the total number of protons and neutrons in its nucleus.

Of these three components, only the atomic number (Z) can be used alone to determine the identity of an element, as it uniquely defines the element and its place in the periodic table. The chemical symbol (X) can also be used to identify an element, but only in conjunction with a periodic table, as some elements have similar symbols. The atomic mass (A) provides information about the mass of the element's nucleus, but does not allow for a unique determination of the element's identity.

Learn more about periodic tables here: brainly.com/question/11155928

#SPJ4

Complete question:

Which of the components of the atomic symbol format xza can be used alone to determine the identity of an element? select all that apply

A. The letter "x"

B. The letter "z"

C. The letter "a"

D. None of the above

The molar mass of the unknown non-electrolyte solute is 19.47 g/mol.

The boiling point elevation can be used to calculate the molality of the solution, which is defined as the number of moles of solute per kilogram of solvent. This can then be used to calculate the molar mass of the solute.

The formula for boiling point elevation is:

ΔTb = Kb x molality

where ΔTb is the change in boiling point, Kb is the boiling point elevation constant for the solvent, and molality is the number of moles of solute per kilogram of solvent.

First, we need to calculate the molality of the solution:

molality = ΔTb / Kb

molality = (82.1°C - 76.5°C) / 4.95 K/m

molality = 0.0177 m

Next, we can calculate the number of moles of solute in the solution:

moles = molality x mass of solvent

moles = 0.0177 m x 50.0 g / 1000 g/kg

moles = 0.88 g

Finally, we can calculate the molar mass of the solute:

molar mass = mass of solute / moles

molar mass = 17.08 g / 0.88 moles

molar mass = 19.47 g/mol

Therefore, the molar mass of the unknown non-electrolyte solute is 19.47 g/mol.

Learn more about molality here: https://brainly.com/question/26921570

#SPJ4

The best way to conceptualize the HNO3 Lewis structure is as the NO3 with a H linked to one of the oxygen atoms.

This pattern is typical of several acids. Calculate the total number of valence electrons in the HNO3 molecule using its Lewis structure.

The valence shell electrons in a molecule are depicted in an extremely simplified manner by a Lewis Structure. It is used to demonstrate how the electrons in a molecule are positioned around particular atoms. When two atoms are bonded together, electrons are depicted as "dots" or as a line.

Learn more about  Lewis Structure:

brainly.com/question/28353159

#SPJ4

If the meniscus is between 11 mL and 12 mL, the volume can be estimated as 11.5 mL.

A buret is a laboratory tool used to dispense and measure the volume of liquid. It has a cylindrical shape and graduated marks along its length to indicate the volume of liquid it contains. To measure the volume of liquid, the meniscus, the curved surface of the liquid, is read at the lowest point.

When the meniscus is exactly between two graduated marks, the volume can be estimated by taking the average of the two marks. In this case, if the meniscus is between 11 mL and 12 mL, the volume can be estimated as:

(11 mL + 12 mL) / 2

= 11.5 mL.

Learn more about meniscus in buret here:

https://brainly.com/question/14667250

#SPJ4

The  milligrams of vitamin c is contained in the aliquot is 74.45mg

The following equation may be used to determine the amount of vitamin C in the aliquot:

Concentration (mg/L) is calculated as follows:

[tex]\frac{(Titrant Volume (mL) x Normality x Vitamin C Molecular Weight (mg/mol)) }{Aliquot Volume (mL)}[/tex]

As a result, the amount of vitamin C in the aliquot is as follows:

[tex]\frac{5.00 mL }{ (5.50 mL x 0.1 x 176.12 mg/mol) }\\\\= 14.89 mg/L[/tex]

The aliquot's vitamin C content is therefore:

[tex]14.89 mg/L x 5.00 mL\\ \\= 74.45 mg[/tex]

74.45mg of  vitamin c is contained in the aliquot

A precise part of a sample or the whole amount of a liquid, as used in chemistry or other sciences (e.g. exactly 25 mL of water taken from 250 ml)

In pharmaceutics, an aliquot is a proportionate dilution of known inactive compounds that is used to measure chemicals below the sensitivity of a scale.

learn more about aliquot Refer:brainly.com/question/15194930

#SPJ4

complete question:An iodometric titration is performed on a 5.00 ml aliquot from a 100.0 ml volumetric flask containing a solution of vitamin c. the titrant volume is 5.50 ml when the solution turns a dark blue color. how many milligrams of vitamin c is contained in the aliquot

To calculate the milliliters of atropine needed, divide the dose ordered by the concentration of the solution. So, you would need to give 1.67 ml of the 0.30 mg/ml atropine solution intramuscularly.

When a physician orders a specific dose of atropine, such as 0.50 mg intramuscularly, it is necessary to determine the volume of the solution that should be administered. This calculation can be done by dividing the dose ordered by the concentration of the solution. In this case, if the atropine is available as 0.30 mg/ml, the calculation would be 0.50 mg ÷ 0.30 mg/ml = 1.67 ml. This means that 1.67 ml of the 0.30 mg/ml atropine solution would need to be given intramuscularly to meet the 0.50 mg dose ordered by the physician. This calculation is important to ensure that the correct dose of medication is given to the patient for optimal therapeutic effect

To know more about the calculation of dosage, visit:https://brainly.com/question/1249197

#SPJ4

The reaction between 38.7 g of CH4(g) and O2(g) to form CH3OH(g) releases 890 kJ of heat at constant pressure.

When 38.7 g of CH4(g) reacts completely with O2(g) to form CH3OH(g), the reaction releases a certain amount of heat. This amount of heat can be calculated by using the balanced chemical equation for the reaction and the heat of the reaction (ΔH). The balanced equation for the reaction is CH4(g) + 2O2(g) -> CH3OH(g) + heat. The heat of reaction, which represents the amount of heat released or absorbed in a chemical reaction, can be found in a thermochemistry table or calculated using other thermochemical relationships. In this case, the heat of the reaction is 890 kJ. This means that when 38.7 g of CH4(g) reacts completely with O2(g) to form CH3OH(g), 890 kJ of heat is released at constant pressure.

To know more about thermochemistry, visit:https://brainly.com/question/1253173

#SPJ4

About equal amounts are contributed by each encounter. The hydrophobic effect, or the of unsaturated R groups inside the protein core and away from the solvent water, is a crucial factor in protein stability.

Water is a material that exists in gaseous, liquid, and solid phases and is made up of the essential elements hydrogen and oxygen. One of the prevalent and necessary substances is it. It is a colorless, odorless liquid at room temperatures with the crucial property of dissolving several other compounds.

Due to its low viscosity, which is caused by the relatively weak connections between its molecules, water is moist in the sense that it flows readily.

To know more about water visit:

https://brainly.com/question/28465561

#SPJ4

The vapor pressure of a non-volatile solute at 338 K

is 0.176 atm.

Calculate The value of the elevation in boiling point :

∆Tb= 384.6 K – 373.15 K = 11.45 K

Then calculate molality :

molality =∆ТЬ /Kb =11.45/ 0.51 = 22.45 m

A solution of 22.45 molal thus includes 22.45 moles of the solute in 1000 g of the solvent (water). The following step is to determine how many moles of water are present using the molar mass of water and the previously mentioned figure of 1000 g water:

Moles= 1000g /18g/mol=

The mole fraction of water solution :

mole of H20 solution= 55.6 : (55.6+22.45) =0.71

Then calculate The vapor pressure of a non-volatile solute at 338 K :

vapor pressure (at 384.6K) =0.2467 atm

vapor pressure (at 338K) = vapor pressure of pure water (at 384.6K) x Mole fraction of water

vapor pressure (at 338K) 0.2467 atm x 0.7123 = 0.176 atm

Learn more about vapor pressure

https://brainly.com/question/30447018.

#SPJ4

Answer:

Explanation:

A steel plaque is attached to a block of wood. The steel and the wood have the same mass. After the steel plaque and the wooden block were left outside in the sun for a period of time, both the steel and the wood had increased in temperature, but the steel had a higher temperature than the wood.It’s possible that the steel plaque had a higher temperature than the wooden block because it__absorbed more heat from______ its surroundings.

If the steel and the wood received the same amount of energy from the Sun, then the specific heat capacity of the steel must be_less than

______ the specific heat capacity of the wood.

The steel plaque had a higher temperature than the wooden block because it has a lower specific heat capacity than wood.

Specific heat capacity is the amount of energy required to raise the temperature of one unit of mass of a substance by one degree Celsius. Substances with a lower specific heat capacity require less energy to raise their temperature than substances with a higher specific heat capacity.

Therefore, even if both the steel plaque and the wooden block received the same amount of energy from the sun, the steel plaque would still have a higher temperature because it required less energy to raise its temperature than the wood did.

In summary, the steel plaque had a higher temperature than the wooden block because it absorbed heat more efficiently from its surroundings, and the specific heat capacity of steel is lower than the specific heat capacity of wood.

Find more on specific heat:

https://brainly.com/question/29766819

#SPJ5