Wind and solar renewable energy technologies have seen substantial cost declines over the past decade. Between 2010 and 2019, the cost of utility-scale solar photovoltaics fell 82 percent, and the cost of onshore wind fell 39 percent.
Increased demand and procurement requires more of these technologies to be manufactured and developed, causing reduced costs due to learning and economies of scale, which increases the incentive for additional procurement. Factors affecting renewable energy deployment include market conditions, policy decisions, as well as specific regulations. Nearly all countries had renewable energy policy targets in place at the end of 2020. Businesses with sustainability goals are also driving renewable energy development by building their own facilities, procuring renewable electricity through power purchase agreements, and purchasing renewable energy certificates.
Learn more about renewable energy https://brainly.com/question/17373437
#SPJ4
What is the addition removal and transfer of energy between Earth's spheres and example of? Pls helpppp
Lithosphere: the solid Earth. Rocks, minerals, and such. hydrosphere: the sum of all the water on Earth. Oceans, ice sheets, glaciers, rivers, lakes, groundwater atmosphere: the gas surrounding the Earth. biosphere: the sum of all the life on Earth.
The lithosphere is the stable, outer part of Earth. The lithosphere includes the brittle higher portion of the mantle and the crust, the outermost layers of Earth's structure. It is bounded through the environment above and the asthenosphere (some other part of the upper mantle) underneath. The lithosphere is a rigid, rocky outer layer of the Earth, which includes the crust and the stable outermost layer of the higher mantle. It extends to a depth of about 60 miles (100 km). It's miles broken into approximately a dozen separate, inflexible blocks, or plates (see plate tectonics).
Learn more about Lithosphere here
https://brainly.com/question/1160217
#SPJ1
Silica tetrahedra can link into long chains that share oxygen ions through the process of?
Silica tetrahedra can link into long chains that share oxygen ions through the process of Polymerization.
In polymer chemistry, polymerization or polymerization is a process of reacting monomer molecules together in a chemical reaction to form polymer chains or three-dimensional networks. There are many forms of coincidence and different systems exist for classifying them.
In chemical compounds, polymerization can occur through a variety of reaction mechanisms varying in degree of complexity due to the functional groups present in the reactants and their inherent steric effect. In simpler polymerizations, alkenes form polymers through relatively simple radical reactions; in contrast, reactions involving substitution at a carbonyl group require more complex synthesis due to the way the reactants polymerize. Alkanes can also be polymerized, but only with the help of strong acids.
Because alkenes can polymerize in fairly simple radical reactions, they form useful compounds such as polyethylene and polyvinyl chloride (PVC), which are produced in large quantities each year due to their usefulness in the production of commercial products, such as pipes, insulation, and packaging.
Learn more about Polymerization here: https://brainly.com/question/1602388
#SPJ4
The safest place for humans to live, away from volcanic activity and earthquakes, is:__________
The safest place for humans to live, away from volcanic activity and earthquakes, is Central US and European Continent.
What is volcanic activity?Gas emissions, non-explosive lava emissions, and extremely intense explosive bursts that may persist for several hours are all examples of volcanic activity. Volcano shapes and sizes are influenced by the types of eruptions in terms of relative quantities, types, and lava flow patterns.Because it is lighter than the surrounding rock, the melted rock, or magma, rises. Although it is still miles below the surface, this magma gathers in magma chambers. When the magma chamber becomes sufficiently overfilled, the magma forces its way to the surface and erupts, frequently resulting in volcanic eruptions.The Mount St. Helens eruption in Washington serves as a good illustration.Learn more about volcanic activity here:
https://brainly.com/question/10564401
#SPJ4
Linear, magnetic patterns associated with mid-ocean ridges are configured as ________.
Linear, magnetic patterns associated with mid-ocean ridges are configured as normal and reversed magnetized strips roughly parallel to the ridge.
What is mid-oceanic ridge?an elevated area with a central valley on the ocean bottom that develops new crust when magma upwells at the border of two diverging tectonic plates.
How many types divergent boundaries?Divergent plate borders come in three varieties: oceanic-oceanic, oceanic-continental, and continental-continental.
What is convergent boundary?When two or more lithospheric plates collide, the result is a region on Earth known as a convergent boundary, also called a destructive boundary. Eventually, a plate subducts beneath another, a process known as subduction. The Wadati-Benioff zone, where numerous earthquakes take place, can be used to define the subduction zone. These collisions, which take place over timescales of millions to tens of millions of years, can result in volcanism, earthquakes, orogenesis, lithosphere damage, and deformation. Oceanic-oceanic, oceanic-continental, and continental-continental lithospheres all have convergence boundaries.
To know more about mid-ocean ridges visit:
https://brainly.com/question/11044512
#SPJ4
Which maintenance record entry best describes the action taken for a control cable showing approximately 20 percent wear on several of the individual outer wires at a fairlead?
The maintenance record entry best describes the given action is that repair is not essential if wear is within reasonable limits.
What is maintenance record entry?Requires that the maintenance record include information on the applicable ADs' current status. If the AD requires recurring action, the time in service and the date that action is required are also required to be included in the record, along with the technique utilized to comply with the AD, the AD number, and the modification date. The work done on the aircraft is described in detail in aircraft maintenance records, together with the date it was finished, the maintenance team's signature, information about the FAA certificate, and the certificate number and signature of the person who put the aircraft back into service.Learn more about maintenance record entry here
https://brainly.com/question/14313019
#SPJ4
Climate determines all of the following except __________.
A.
the price of produce
B.
the amount of production
C.
what products are cultivated
D.
where agriculture is produced
Please select the best answer from the choices provided.
A
B
C
D
Answer:
The answer is C, what products are cultivated.
Explanation:
PLEASE HELP ASAP WITH THIS QUESTION-
Look closely at these two maps of the ancient China, each from a different time period. Explain how cultural diffusion could help the Qin Dynasty (second map) cover so much more land area than the Zhou Dynasty (first map) by 210 BCE. Also explain how geography affects such a change.
The way that cultural diffusion would help the Qin to cover so much more than the Zhou would be that there was a spread in the elements of the culture of the Qin people in this period of time.
What is cultural diffusion?This is the term that is used to refer to the social changes that would occur due to the fact that there is a spread of the culture in a place to other areas that are around it.
Through the effects of cultural diffusion, there would be the spread of language and also the spread of cultural elements such as food and other aspects of culture. Also the religion of the people would be spread out to the areas that it now covers as the Qin took over the government.
Hence we can say that the The way that cultural diffusion would help the Qin to cover so much more than the Zhou would be that there was a spread in the elements of the culture of the Qin people in this period of time.
Read more on cultural diffusion here:
https://brainly.com/question/2846111
#SPJ1
In activity 6b, question 1, you determined the great circle distance between memphis, tennessee, and tokyo, japan. how many miles shorter is the great circle?
The distance between Memphis and Tokyo (3,554 miles) 43Degrees along the great circle between Memphis and Tokyo = 93.5ºDistance.
What is great circle?The great circle is the largest circle that may be traced on the surface of a sphere. In addition to being the shortest path between any two points on a sphere's surface, a great circle is a section of the sphere that spans its diameter.
What are the benefits great circle?One of the few situations in which the great circle formula is implemented is in the navigation of ships or airplanes. The great circle formula helps in navigation by figuring out the shortest distance inside the sphere because the Earth is spherical.
To know more about earth visit:
https://brainly.com/question/12041467
#SPJ4
Why are temperatures cooler in quito, ecuador, than in most other places located near the equator?.
Answer:
The temperatures in Quito, Ecuador is cooler than most places located near the eqautor bcz it's surrounded by icy mountains.
Explanation:
Why does summer in the northern hemisphere occur when earth is farthest from the sun?.
Answer: That's because, at our farthest from the sun, like now, Earth is traveling most slowly in its orbit. That makes summer the longest season in the Northern Hemisphere and winter the longest season on the southern half of the globe.
Explanation: hope this helps
4.
Month
January
July
Average Temperatures in Rome
Daily Average High Temperature (C)
11
30
One reason for the difference between these temperatures in the table is -
Average Temperatures in Rome each day common high Temperature: around fifty four°F January weather in Rome Italy.
Temperature is a bodily amount that expresses the hotness of matter or radiation. There are three kinds of temperature scales: those, consisting of the SI scale, which can be described in terms of the average translational kinetic power according to freely shifting microscopic particle, along with atom, molecule, or electron, in a body; those who rely totally on merely macroscopic residences and thermodynamic ideas, inclusive of Kelvin's original definition; and people that are not defined by means of theoretical concepts, however, are described through convenient empirical properties of precise materials.
Definition of temperature: diploma of hotness or coldness measured on an exact scale. b: the degree of warmth this is natural to the body of a living being. c: abnormally excessive body warmness going for walks a temperature.
Temperature is a degree of ways hot or bloodless something is; especially, a degree of the average kinetic energy of the particles in an item, which is a sort of strength related to movement.
Learn more about Temperature here: https://brainly.com/question/24746268
#SPJ9
Where a mid-ocean ridge is offset, the linear feature connecting and between the crests of the ridge segments is called a __________.
Where a mid-ocean ridge is offset, the linear feature connecting and between the crests of the ridge segments is called a transform fault.
Transform fault, in geology and oceanography, are type of fault in which two tectonic plates slide over each other. Transform faults can occur in parts of fault zones that lie between different offset propagating centers, or in parts that connect propagating centers to deep-ocean trenches in subduction zones.
The spatial direction of the translation error is usually parallel to the plate motion. Deformation faults are the only segments of seismically active shatter zones. Morgan's theory made a very dramatic prediction, that the direction of translation error movement is opposite to the displacement of the ocean ridge.
Know more about transform fault here
https://brainly.com/question/19595604
#SPJ4
In order for sediment to be transformed into rock, what processes must take place? question 2 options: melting and spreading crystallization and solidification weathering and erosion compaction and cementation
Answer:
I think the correct answer from the choices listed above is option D. In order for sediment to be transformed into rock, compaction and cementation processes should take place. After these processes, the sedimentary sequence has changed into a sedimentary rock. Hope this answers the question.
What do the ruins of buildings and infrastructure in mohenjo daro demonstrate about the cultures of the indus river valley?
The ruins of buildings and infrastructure in Mohenjodaro demonstrate the cultures of the Indus river valley by showing how the inhabitants of Mohenjodaro engaged in urban planning and community-wide cooperation.
Mohenjo-Daro is the largest site found and excavated of the Indus Valley civilization. In its literal meaning, it means “Mound of the Dead Men”. First discovered by Rakhal Das Benerji in 1920, an officer of the Archaeological Survey of India. Like most Harrapan cities it has two parts – the Citadel and the Lower City. It is famous for a rectangular public pool situated in the citadel which is called the Great Bath. The people of Mohenjo Daro were engaged in specialized tasks, including brickmaking, construction, engineering, and agriculture.
Learn more about Mohenjo-Daro:
https://brainly.in/question/48296221
Total species diversity, or species richness, of individual communities is referred to as _______ diversity.
Answer:
Biodiversity
Explanation:
Earth's weather results from the transport of heat energy. most of this heat energy comes from?
Answer:Energy from the sun is transferred through space and through the earth's atmosphere to the earth's surface. Since this energy warms the earth's surface and atmosphere, some of it is or becomes heat energy. There are three ways heat is transferred into and through the atmosphere: radiation.
Explanation:
The 1964 earthquake in alaska was very powerful (9.2mw), yet the loss of human life was not as high as it could have been. what factors helped to limit the loss of life?
The factors that helped to limit the loss of life in Alaska 1964 earthquake were:
Above-average temperatures helped to prevent cold-related deaths as heating systems were being repaired.
The tsunami struck when the tides were low.
Relatively few people lived in the area at that time of year.
Alaska is not a heavily populated region. The earthquake that happened on March 27, 1964, was the second-biggest earthquake ever recorded in the planet and the greatest in US history (magnitude 9.2 on the Richter scale). Numerous landslides and avalanches were caused by the four-minute earthquake. There was significant structural damage in many of Alaska's main cities.
Know more about Alaska here
https://brainly.com/question/10454710
#SPJ4
The cleavage of a silicate mineral is largely determined by __________. group of answer choices
The cleavage of a silicate mineral is largely determined by internal structure.
According to their chemical makeup, which is manifested in their physical characteristics, minerals are categorised. A mineral's physical characteristics can be employed for diagnostic purposes because they are based on the chemical make-up and internal atomic structure of the mineral.
Color, hardness, lustre, crystal formations, density, and cleavage are characteristics that aid geologists in determining a mineral's identity in a rock. The atomic structure of a crystal essentially determines its form, cleavage, and hardness. Chemical composition is the main determinant of colour and density. The chemical makeup of minerals is used to categorise them.
Know more about silicate mineral here
https://brainly.com/question/6868721
#SPJ4
Generally, hurricanes are ________. group of answer choices smaller than tornadoes smaller than midlatitude cyclones areas of light rainfall and slow winds areas of high temperature
The correct answer is Option B) Smaller than mid latitude cyclones.
Generally, hurricanes are smaller than mid latitude cyclones.
What are hurricanes?Hurricanes are tropical cyclones with winds which exceed 74 mi/hr. They blow counter clockwise about their centers in the Northern Hemisphere and the opposite in the Southern Hemisphere. The hurricane season is usually from June through November. This is when water temperatures are usually high. These are larger than thunderstorms and tornadoes but smaller than mid latitude cyclones.
The components of a hurricane are:
The Eye of the hurricaneEye Wall of the hurricaneSpiral Rain bands of the hurricaneTo know more about hurricanes, visit:
https://brainly.com/question/18950883
#SPJ4
True or false crystal habit refers to the characteristic shape of a mineral crystal or aggregate of minerals
Answer: False
Explanation:
The habit or form of a crystal refers to the characteristic shape in which a mineral commonly grows
Answer:
True
Explanation:
this os trye beacause characteristic os the shape of a mineral crystal
If the earth's rotation axis were tilted by 45 degrees instead of 23.5 degrees, what are some of the implications, and why?
If the Earth's rotation axis were tilted by 45 degrees instead of 23.5 degrees, then the seasons would be more extreme.
What is the rotation axis of Earth?The rotation axis of the Earth is an imaginary straight line around which the Earth spins. It goes from the North Pole to the South Pole cutting through the center of the Earth. The axial tilt of the Earth which is also known as the obliquity of the ecliptic is about 23.5 degrees. Due to this tilt, the Sun shines on different latitudes and longitudes at different angles throughout the year. This is why we have different seasons. Uranus has the largest axial tilt in the solar system, which is around 98 degrees.
If the Earth's rotation axis were tilted by 45 degrees instead of 23.5 degrees, then the seasons would be more extreme as the rays of the Sun would fall directly in the summer and not so direct in the winter.
To know more about the rotation axis of the Earth, visit:
https://brainly.com/question/21893931
#SPJ4
Where a mid-ocean ridge is offset, the linear feature connecting and between the crests of the ridge segments is called a?
When a mid-ocean ridge is offset, the linear feature connecting and between the crests of the ridge segments is called a Transform Fault.
As the Earth's tectonic plates separate, new ocean bottom is generated along divergent plate borders, which are known as mid-ocean ridges. Massive basalt volcanic eruptions result from molten rock rising to the seafloor as the plates divide. A ridge's shape is influenced by how quickly it spreads; slower spreading rates produce steep, erratic topography, while faster spreading rates result in much wider profiles and kinder slopes.
In geology and oceanography, a transform fault is a type of fault when two tectonic plates slide past one another. A transform fault may develop in the area of a fracture zone that connects spreading centres to deep-sea trenches in subduction zones or that lies between various offset spreading centres.
In the 1960s, Morgan postulated that spreading centres and transform faults separate opposing plates along an oceanic ridge crest that is offset by fracture zones.
The direction of motion on the transform faults was predicted by Morgan's hypothesis to be opposite to the offsets of the ridge crests, which was a rather dramatic assertion.
Learn more about Mid ocean ridge here:
https://brainly.com/question/7666628
#SPJ4
A large sea wave produced by uplift, subsidence, or some other disturbance of the seafloor, especially by a shallow submarine earthquake, is a(n)?
A large sea wave produced by uplift, subsidence, or some other disturbance of the seafloor, especially by a shallow submarine earthquake, is a Tsunami.
Tsunamis are massive sea waves that are caused by uplift, subsidence, or other seafloor disturbances, particularly shallow undersea earthquakes. An earthquake that takes place underwater at the bottom of a body of water, particularly an ocean, is known as a submarine earthquake.
They are the main reason why tsunamis occur. The Richter scale or the Mercalli scale can be used to scientifically determine the magnitude. Understanding plate tectonics makes it easier to explain how submarine earthquake are caused. The tectonic plates that make up the Earth's surface, or lithosphere, have a thickness of about 50 miles on average.
To know more about submarine earthquake
brainly.com/question/4118107
#SPJ4
Air masses that form over __________ carry much more moisture due to evaporation.
Air masses that form over water carry much more moisture due to evaporation.
Which air mass has the most moisture?Maritime air masses, also known as ocean air masses, are more humid than continental air masses, which are air masses that originate over land. The air mass's temperature, which varies depending on the latitude at where it formed, is indicated by the second component of the name.Why do you suppose the air masses that develop over water are moist?High air pressure is present in polar or cold air masses. Unsurprisingly, whether an air mass arises over land or water affects its humidity. Due to water evaporation across oceans, maritime air masses frequently have a humid climate.To learn more about moisture visit:
https://brainly.com/question/2005496
#SPJ4
In a factorial experiment, each combination of different levels of the factor is called a(n)?
In a factorial experiment, each combination of different levels of the factor is called a treatment.
Each combination of the various degrees of the factor in a factorial experiment is referred to as a treatment. The term "factorial experiment" refers to an experiment whose design includes two or more factors, each having discrete possible values or "levels," and whose experimental units take on all possible combinations of these levels across all such factors.
Also known as a fully crossed design, a full factorial design has several factors. This kind of factorial experiment enables the researcher to investigate how each element affects the response variable and how those effects interact with one another.
To know more about factorial experiment
brainly.com/question/17201051
#SPJ4
Turbidity currents are great masses of sediment-laden water that are pulled downhill by?
Turbidity currents are great masses of sediment-laden water that are pulled downhill by gravity.
According to this theory, the oceans formed when water vapor and other gases escaped from Earth's lava into the atmosphere surrounding the cooling planet. After the surface of the earth cooled to a temperature below the boiling point of water, it began to rain and continued to rain for centuries.
Factors controlling sedimentation include particle size and turbulence in the sedimentation environment. Terrestrial sediment-laden water is a good reflection of its origin and is carried to the sea by winds, rivers, and glaciers. The rate of erosion is important in determining sediment composition.
Learn more about sediment at
https://brainly.com/question/28272396
#SPJ4
The 4 stages of the wilson cycle describes the birth and death of an ocean. these stages are:____.
The 4 stages of the Wilson cycle describes the birth and death of an ocean. these stages are embryonic, juvenile, mature, decreasing, terminal, and suturing.
The tectonic movement of the Earth causes the periodic opening and closure of ocean basins. A rising plume of magma and crustal weakness initiate the Wilson cycle. The Wilson cycle is named after J. Tuzo Wilson, a Canadian geophysicist. One of the most essential interpretations of current plate tectonics and the Wilson cycle is that all other rocks on the planet may be created from a parent igneous rock of mafic/ultramafic composition.
Sediments build near ocean basin borders when the crust thins owing to extensional tectonic processes. Subduction then occurs on one of the ocean basin's boundaries, narrowing the basin. A fresh cycle begins when the crust begins to thin again.
Learn more about Wilson Cycle here:
https://brainly.com/question/14605889
#SPJ4
Which gases are primarily responsible for the atmospheric greenhouse effect in earth's atmosphere?
Carbon dioxide, methane, and water vapour are primarily responsible for the atmospheric greenhouse effect in earth's atmosphere.
What are greenhouse effect?When heat from a planet's host star passes through its atmosphere and heats the planet's surface, but the atmosphere prevents the heat from going directly to space, the planet becomes warmer. The greenhouse effect is the name of this phenomenon.As an illustration of the greenhouse effect, consider how your car will be successfully warmed by bright sunlight on a chilly, clear day. Longer infrared wavelengths emitted by items warmed by the sun are more difficult to penetrate glass. The interior of the car is warmed by the energy that is trapped within. The greenhouse effect is the major contributor to climate change.Learn more about greenhouse effect here:
https://brainly.com/question/2491116
#SPJ4
The temperate grasslands biome includes regions of several continents. What do all of the regions have in common?.
The one common thing for all the temperate grasslands biome which includes regions of several continents is the same seasonal patterns of temperature and precipitation.
Pampas, downs, and veldts are some of the several names for temperate grasslands, which are stretches of wide, grassy plains with few trees.
Argentina, Australia, and central North America are examples of places with temperate grasslands. Temperatures change with the seasons, and many temperate grassland areas experience tornadoes, blizzards, and fires.Both large and small herbivores can be found living in temperate grasslands.The temperature here fluctuates like In certain places, the wintertime lows can reach considerably below zero degrees Fahrenheit. Summertime highs can exceed 90 degrees Fahrenheit. Low to moderate amounts of precipitation fall in temperate grasslands on a yearly average (20-35 inches).To know more about temperate grasslands go to https://brainly.com/question/19006520
#SPJ4
volcanic eruptions are likely to be more explosive for magmas that have . (select all that apply.)
High viscosity magmas and magmas with a high gas content prefer explosive eruptions (andesitic to rhyolitic magmas). The magma is broken up into liquid clots by the explosive bubble explosion, and these clots cool as they fall into the atmosphere.
How does volcano erupt?Because of how hot it is deep under the Earth, some rocks slowly melt and turn into a thick, flowing material known as lava. Magma rises and gathers in magma chambers because it is lighter than the surrounding solid rock. A portion of the lava eventually rises to the Earth's surface through vents and fissures.
To know more about volcanic eruptions visit:
https://brainly.com/question/1622004
#SPJ4