Answer:
[tex]\huge\boxed{\sf \lambda = 1.2 \times 10^{-6} \ m}[/tex]
Explanation:
Given data:Frequency = f = 2.5 × 10¹⁴ Hz
Speed of light = c = 3 × 10⁸ m/s
Required:Wavelength = λ = ?
Formula:[tex]\displaystyle \lambda = \frac{c}{f}[/tex]
Solution:Put the given data in the above formula.
[tex]\displaystyle \lambda = \frac{3 \times 10^8}{2.5 \times 10^{14}} \\\\\lambda = 1.2 \times 10^{8-14}\\\\\lambda = 1.2 \times 10^{-6} \ m\\\\\rule[225]{225}{2}[/tex]
3. why is it important to use only deionized water rather than tap water to extract the nacl from the mixture?
It is important to use only deionized water rather than tap water to extract the NaCl from the mixture because deionized water helps in eliminating impurities coming from the tap water or packed bottles of water.
Deionizing of water removes ions and other unwanted particles present in water, which reduces chemical reactions between dissolved solids. This makes the solution purer, with only few substances left behind.
Generally, laboratory technicians can effectively manufacture the right medical products with the help of a suitable chemical composition for pure and neutral water (deionized).
For example, where a chemist wants to create saline or another solution which is to be infused into the body for curing the disease. Therefore, in such case water must first be deionized properly first then that becomes suitable for making saline.
Learn more about deionized water from the link given below.
https://brainly.com/question/25326107
#SPJ4
Before adding a sample or solvent to a separatory funnel, what should you have in place?
Before the addition of a sample or solvent to a separating funnel, we must have a funnel in the top of the separatory funnel along with a stopcock in the closed position and definitely a flask under the separatory funnel.
A separatory funnel must be vented to make sure that there is no gas buildup. It could unintentionally push the liquid or stopper out of the funnel.
The separatory funnel should be turned in gently while holding the stopper. The pointed end points upward and away from any persons or significant laboratory apparatus.
To protect the analyst from solvent vapor exposure, the separatory funnel needs to be vented into a hood. 7.6 At least 10 minutes should pass while the organic layer separates from the aqueous phase.
To learn more about separatory funnel:
brainly.com/question/14504717
#SPJ4
what information is necessary to review in order to be considered familiar with the safety data sheet (sds) of a substance? select one or more: identification and description of substance personal protection and first aid recommendations handling, storage, and reactivity information hazard warnings literature examples of use of the substance
To be considered familiar with a material safety data sheet (SDS), verify hazard statements, material identification and description, handling, storage and reactivity information, and personal protection and first aid recommendations need to do it.
Safety data sheets contain information such as the properties of each chemical. Physical, physical, and environmental health hazards; protective measures; safety precautions for chemical handling, storage, and transport. A Safety Data Sheet (previously called a Material Safety Data Sheet) is a detailed information document prepared by a manufacturer or importer of hazardous chemicals. Describes the physical and chemical properties of the product.
Learn more about SDS
brainly.com/question/13616947
#SPJ4
what functional groups participate in the formation of a phosphodiester bond?
When two of the phosphoric acid's hydroxyl groups interact with hydroxyl groups on other molecules to produce two ester bonds, a phosphodiester bond is created.
What types of functional groups make up a phosphodiester bond?The condensation reaction between the phosphate groups and the hydroxyl groups of the two sugar groups produces the phosphodiester bonds. For instance, the hydroxyl group is created when one oxygen atom and one hydrogen atom combine to form a link.
A phosphodiester bond is what kind of a bond?A phosphate group connects two nearby carbons through ester connections to form a covalent bond known as a phosphodiester bond. A condensation reaction between a phosphate group nd a hydroxyl group from two sugar groups produces the link.
to know more about phosphodiester bonds here:
brainly.com/question/23660733
#SPJ4
a sample of sand has a mass of 50.3 g and a volume of 31.7 cm3 . calculate its density in grams per cubic centimeter ( g/cm3
The density of the sand sample is 1.59 g/cm3.a sample of sand has a mass of 50.3 g and a volume of 31.7 cm3
To calculate the density, divide the mass of the sample by its volume:
50.3 g / 31.7 cm3 = 1.59 g/cm3.
This result indicates that the sand sample has a density of 1.59 grams per cubic centimeter.
Density is an important physical property that can be used to identify a substance, as each substance has a unique density.
The density of a material can also be used to calculate the mass of a sample given its volume, or to determine the volume of a sample given its mass.The equilibrium constant of a reaction determined by "The molarity of products is divided by the molarity of reactants".
The proportion between the product concentration and the reactant concentration would be known as the equilibrium constant.
Learn more about density here:
https://brainly.com/question/29775886
#SPJ4
The sand sample has a density of 1.59 g/cm3. A sample of sand weighs 50.3 g and measures 31.7 cm3 in volume.
Divide the sample's mass by its volume to determine its density: 50.3 g / 31.7 cm3 = 1.59 g/cm3.
This finding suggests that the density of the sand sample is 1.59 grammes per cubic centimetre.
Due to the fact that each material has a distinct density, density is a crucial physical characteristic that can be used to identify a substance.
The mass of a sample given its volume can also be calculated using the density of a substance, as can the volume of a sample given its mass.
The formula "The molarity of products is divided by the molarity of reactants" is used to calculate the equilibrium constant of a process.
The equilibrium constant would be the ratio of the product concentration to the reactant concentration.
To learn more about density here:
brainly.com/question/29775886
#SPJ4
c4h8 decomposes in a first order reaction, with a rate constant of 85.0 s-1 to two molecules of c2h4. if the initial concentration of c4h8 is 2.20 m, what is the concentration after 0.0120 s?
The concentration after 0.0120 s is 0.808 m
The decomposition of C4H8, occurring in a first-order reaction, is characterized by a rate constant of [tex]85.0 s^{-1[/tex], resulting in the formation of two molecules of C2H4.
The rate of the reaction is dependent on the concentration of the reactant, C4H8, following a specific mathematical relationship. This relationship, represented by the rate equation,
d[C4H8]/dt = -k[C4H8], expresses the change in concentration over time, where k represents the rate constant.
By solving the differential equation, [C4H8] = [C4H8]0 * [tex]e^{(-kt)}[/tex], with the initial concentration of C4H8, [C4H8]0, equal to 2.20 m and t equal to 0.0120 s, we can determine the concentration of C4H8 after that specific time interval.
Plugging in the values, we get [C4H8] = 2.20 m * [tex]e^{(-1.02)}[/tex] = 0.808 m.
Thus, the reaction, with its unique rate constant and mathematical relationship, transforms the initial concentration of C4H8 into a new concentration, exhibiting the dynamic nature of chemical reactions.
To learn more about decomposition:
https://brainly.com/question/14608831
#SPJ4
tyrosine is an amino acid whose side chain has a pka of 10.1. at ph 7, what protonation form would you expect to find it in?
Tyrosine should be in its neutral (unprotonated) form at pH 7, according to expectations.
One of the 20 standard amino acids that cells need to create proteins is L-tyrosine, also known as tyrosine or 4-hydroxyphenylalanine. It is a polar side-grouping non-essential amino acid. As the cheese-derived protein casein was originally identified by German scientist Justus von Liebig in 1846, the name "tyrosine" is derived from the Greek word tyrós, which means "cheese." When referred to as a functional group or side chain, it is referred to as tyrosyl. Tyrosine is more hydrophilic than phenylalanine, despite the fact that it is traditionally categorised as a hydrophobic amino acid. The messenger RNA codons UAC and UAU are responsible for encoding it.
learn more about tyrosine Refer:brainly.com/question/14514170
#SPJ4
complete question:Tyrosine is an amino acid whose side chain has a pKa of 10.1. At pH 7, what protonation form would you expect to find it in?
a.) protonated
b) unprotonated
For 10.0minutes, Amelia drove her tractor at a constant velocity across a field. If her tractor traveled 201meters during this time, what was the tractor's velocity?
Write your answer to the tenths place.
metersperminute across the field
The tractor's velocity would be 0.3 m/s.
What is velocity?The velocity of a moving object is the speed of the object in a specific direction. The speed of an object in itself is the ratio of the distance covered by the object and the time spent.
Thus:
Velocity = distance/time
In this case, time = 10 minutes = 10 x 60 = 600 seconds.
Distance = 201 meters.
Velocity of the tractor = 201/600 = 0.335 m/s
To the tenth place, 0.335 = 0.3 m/s
In other words, the velocity of the tractor is 0.3 m/s.
More on velocity can be found here: https://brainly.com/question/19979064
#SPJ1
A 300 kg car is moving with an acceleration of 10 m/s/s. What is the force of this car?
The force of the 300kg car moving with an acceleration of 10 m/s² is 3000N.
How to calculate force?The force of a car can be calculated by multiplying the mass of the object by its acceleration as follows:
Force = mass × acceleration
According to this question, a 300kg car is moving with an acceleration of 10 m/s². The force acting on the object is calculated as follows:
Force = 300kg × 10m/s²
Force = 3000N
Learn more about force at: https://brainly.com/question/1046166
#SPJ1
if only cof2 is present initially at a concentration of 2.00 m , what concentration of cof2 remains at equilibrium?
If only cof2 is present at a concentration of 2.00 m at the start, the equilibrium concentration of cof2 is 0.388 M.
Kc=[CO2][CF4]/[COF2]2
let [CO2] = [CF4] = x
then [COF2] = 2.00 - 2x
[tex]\frac{x^{2} }{(2.00-2x) ^{2}}[/tex]=4.30
x=0.806
concentration of [COF2] = 2.00 - 2x = 0.388 M
Equilibrium is a state in a process in which the observable properties such as color, temperature, pressure, concentration, and so on do not change.
The word equilibrium means 'balance,' implying that a chemical reaction represents a balance between the reactants and products involved in the reaction. The equilibrium state is also observed in certain physical processes, such as the melting point of ice at 0°C, where both ice and water are present.
The equilibrium associated with physical processes such as solid melting, salt dissolution in water, and so on is known as physical equilibrium, whereas the equilibrium associated with chemical reactions is known as a chemical equilibrium.
Learn more about Equilibrium here:
https://brainly.com/question/29359870
#SPJ4
The complete question is:
2COF2(g)⇌CO2(g)+CF4(g), Kc=4.30
If only COF2 is present initially at a concentration of 2.00 M, what concentration of COF2 remains at equilibrium?
what is the maximum number of bonds phosphorous can form?
Five bonds can be formed at maximum by phosphorus .
What are bonds?Atoms are held together to form molecules by chemical forces called bonds. The positively charged protons and neutral neutrons that make up an atom's nucleus are encircled by a cloud of negatively charged electrons.
Phosphorus is a trivalent element because it may make up to five bonds with other elements. Each phosphorous atom has three valence electrons in its most prevalent oxidation state of 3, which it can employ to create bonds with other elements. As a result, phosphorous atoms can create bonds with as many as three additional atoms. However, in specific circumstances, phosphorus can create more bonds by enlarging its valence shell with the help of its d-orbitals. For instance, there are five bonds altogether between each phosphorous atom and the three hydrogen atoms that make up the complex phosphine (PH3).
To know more about bonds, visit:
https://brainly.com/question/10777799
#SPJ4
the density of a 48.0%(mass) aqueous solution of h2so4 is 1.3783 g/cm3. what is the molarity of the solution?
The density of a 48.0 % by mass of aqueous solution of H₂SO₄ is 1.3783g/cm³. The molarity of the solution is 13.78 M.
The mass of the sulfuric acid= 48 % by mass = 48 g
The mass of the given solution= 100 g
The density of the given solution= 1.3783 g
The density = mass / volume
Volume = mass / density
Volume = 48 / 1.3783
= 34.82 mL
The moles = mass / molar mass
= 48 / 98
= 0.48 mol
The molarity is expressed as
Molarity = moles / volume in L
= 0.48 / 0.03482
= 13.78 M
Thus, the molarity of the solution is 13.78 M.
To learn more about molarity here
https://brainly.com/question/29577417
#SPJ4
13. a metal bar weighs 196 lbs. if the bar is 72% iron, 18% chromium, and 10% nickel, what is the weight of iron (in g) in the bar?
A metal bar weighs 196 lbs, if the bar is 72% iron, 18% chromium, and 10% nickel, the weight of iron (in g) in the bar is 2953.2 gm.
To calculate the weight of iron in the metal bar, use the following equation:
= Weight of Iron (g)
= (Weight of Bar (lbs) x Percent Iron (fraction)) / (Molecular Weight of Iron (g/mol))
For iron, the molecular weight is 55.85 g/mol.
Therefore, the weight of iron in the bar is:
= Weight of Iron (g)
= (196 lbs x 0.72) / 55.85 g/mol
= 2,953.2 g
To know more about metal please refer: https://brainly.com/question/29404080
#SPJ4
assume you have a (theoretical) 100% pure crystal of silicon at room temperature. no impurities at all. what are the types of point defects that can form?
If you have a 100% pure crystal of silicon at room temperature, the types of point defects that can form are: A. Vacancies B. Interstitials
It is possible for vacancies, where an atom is missing from its normal lattice position, and interstitials, where an atom is placed in a position between normal lattice sites, to form in a crystal.
Substitutional defects, where an impurity atom is substituted for a normal lattice atom, are not possible in a 100% pure crystal. Line defects and screw dislocations, which are defects that occur along extended lines in the crystal, are not considered point defects.
Learn more about Temperature here: brainly.com/question/11464844
#SPJ4
Complete question:
Assume you have a (theoretical) 100% pure crystal of silicon at room temperature. No impurities at all. What are the types of point defects that can form?
A. Interstitials
B. Substitutional defects
C. Vacancies
D. Line defects
E. Screw dislocations
A vise grip applies a pressure of 840 Pa. How many atmospheres of pressure?
Answer: .00829 atm
Explanation:
1 atm is = 101325 Pa
Take 840 Pa and divide by 101325
840 Pa = .00829 atm
in 2017 it was estimated that 47 per cent of Indians worked in the primary sector_mainly in agriculture. why was this sector the least important of the three in terms of outputs
Factors such as the lack of arable land and the scarcity of water make agriculture less productive in India.
Why does agriculture have the least output in India?India has a large area of degraded and infertile land, which limits the ability of farmers to produce crops. Soil degradation is caused by factors such as deforestation, overgrazing, and soil erosion.
India is facing an increasingly serious water shortage, which affects agriculture in many regions. Lack of access to water for irrigation is a major limiting factor for crop production.
Learn more about Agriculture in India:https://brainly.com/question/30095494
#SPJ1
you are given a compound with the formula mcl2, in which m is a metal. you are told that the metal ion has 28 electrons. what is the identity of the metal? g
When we are given a compound with the formula MCl2, in which M is a metal which has 28 electrons then the metal is Nickel (Ni).
Given the number of electrons is = 28
We know that the presence of number of electrons indicate the atomic mass of an element. So, here the 28 electrons represents Nickel element. The metal "M" is described as having the formula "MCl2," which indicates that it has a charge of +2 since each chlorine atom has a negative charge. It is evident that this metal previously had 28 electrons, having lost 2 of those electrons. As far as the periodic table is concerned, a metal with the atomic number 28 was studied because an atom that has 28 electrons in a neutral state must also have 28 protons, and protons are what give an atom its atomic number. As a result, the periodic table identifies nickel as the metal with atomic number 28.
To learn more about nickel click here https://brainly.com/question/15027126
#SPJ4
calcium reacts with water to form calcium hydroxide and hydrogen. in the balanced equation for this reaction, what is the coefficient of hydrogen?
When calcium reacts with water to form calcium hydroxide and hydrogen in the balanced equation for this reaction, then the coefficient of hydrogen will be 1.
Calcium is a chemical element having symbol Ca and its atomic number will be 20. As an alkaline earth metal, calcium is a very reactive metal that forms a dark oxide-nitride layer when it is exposed to air. Its physical as well as chemical properties are most similar to its heavier homologues strontium and barium. It is the fifth most abundant element in Earth's crust, and the third most abundant metal, after iron and aluminum.
The balanced chemical equation for the reaction of calcium with water to form calcium hydroxide and hydrogen is:
Ca + 2H₂O → Ca(OH)₂ + H₂
In this equation, the coefficient of hydrogen (H₂) is 1.
To know more about calcium here
https://brainly.com/question/4023397
#SPJ4
What is the percentage by mass of sodium (Na) in a formula unit of sodium hydrogen carbonate (NaHCO3) ?
A: 44.2%
B: 37.7%
C: 27.4%
D: 16.7%
The percentage by mass of sodium (Na) in a formula unit of sodium hydrogen carbonate (NaHCO₃) is 27.4% (Option C)
How to determine the percentage composition of sodium (Na)?We'll begin by obtaining the molar mass of sodium hydrogen carbonate (NaHCO₃). This is shown below:
Molar mass of NaHCO₃ = 23 + 1 + 12 + (16 × 3) = 23 + 1 + 12 + 48 = 84 g/moleNext, we shall determine the mass of sodium, Na in NaHCO₃. Details below:
Mass of Na in NaHCO₃ = Na = 23 gFinally, we shall determine the percentage of sodium, Na in NaHCO₃. This is shown below:
Molar mass of NaHCO₃ = 84 g/moleMass of Na in NaHCO₃ = 23 gPercentage of Na = ?Percentage of Na = (mass of Na / mass of NaHCO₃) × 100
Percentage of Na = (23 / 84) × 100
Percentage of Na = 27.4%
Thus, the percentage of sodium, Na is 27.4% (Option C)
Learn more about percentage composition:
https://brainly.com/question/11952337
#SPJ1
the molecular formula for both galactose and glucose is c6h12o6. the molecular formula for lactose is c12h22o11. why is the formula not c12h24o12?
The molecular formula of lactose is not C12H24O12 because that formula does not reflect the actual chemical composition of lactose.
The molecular formula of lactose, C12H22O11, represents the actual chemical composition of the molecule and the number of atoms of each element it contains. While it's true that the formula could also be written as C12H24O12, this would not accurately reflect the chemical structure of lactose.
Lactose is a disaccharide, meaning that it is composed of two monosaccharides, which in this case are glucose and galactose. The molecular formula of lactose is derived from the formulas of its constituent monosaccharides and takes into account the chemical bond that links them together. When glucose and galactose are chemically bonded, one molecule of water H2O is eliminated, resulting in the formation of lactose with the formula C12H22O11, which is derived from the formulas of its constituent monosaccharides and takes into account the chemical bond between them.
To learn more about Molecular formula :
https://brainly.com/question/11126982
#SPJ4
In the Kinetics of an Iodine Clock Reaction procedure, the initial rate is calculated by multiplying the initial concentration of ___ChooseThe Triiodide IonorThe Thiosulfate(Sentence continues on)by half, and dividing by the elapsed time as measured with a ____ChooseA Stop WatchorThe Lab Clock
In the Kinetics of an Iodine Clock Reaction procedure, the initial rate is calculated by multiplying the initial concentration of the thiosulfate ion half, and dividing by the eplapsed time as measured with a stop watch.
What is the kinetics approach for beginning rates?By performing the reaction numerous times under controlled circumstances and measuring the rate of the reaction in each instance, the values of these reaction orders can be determined using the method of starting rates. With the exception of one reactant's concentration, all variables are maintained constant from one run to the next.
Why are starting rates for enzyme kinetics measured?When enzyme and substrate concentrations are known, the original rate of the reaction can be compared fairly with new enzyme or substrate concentrations.
Why does enzyme concentration cause the initial rate of the reaction to rise?The reaction will not go forward as quickly if there is inadequate enzyme since the reaction will occupy all of the active sites. The reaction might be sped up by adding more active sites. The pace of reaction accelerates as enzyme concentration rises.
To know more about iodine visit:
https://brainly.com/question/16944311
#SPJ4
uranium-238 decays into thorium-234 plus an alpha particle. how much energy is released in this process
The energy released in the process of α-decay of U-238 into Th-234 is 4.274 MeV.
Since the binding energy released (spontaneous decay processes must be exoergic) corresponds to a loss of mass, the decay energy can be computed from the known atomic masses. The Q-value of the reaction is another name for this energy.
[tex]Q_{a}[/tex] = -931.5 ([tex]M_{Th} + M_{He} - M_{U}[/tex])
= - 931.5 (234.043 + 4.002 – 238.050) = 4.274 MeV.
Alpha particle decay typically occurs in large materials like uranium. A helium nucleus with two protons and two neutrons makes up an alpha particle. Thus, Uranium will lose two protons and two neutrons. U-238 contains 146 neutrons and 92 protons (238-92). It will have 90 protons and 144 neutrons if it loses 2 protons and 2 neutrons. Thorium, abbreviated Th, is the element having 90 protons and will have a mass number of 144 + 90 = 234. You will therefore be surrounded by an alpha particle and thorium-234.
To know more about alpha decay, refer:
https://brainly.com/question/29205436
#SPJ4
suppose that a chemist combines 253 ml of methane and 891 ml of chlorine at stp in a 2.00 l flask. the flask is then allowed to stand at 298 k. if the reaction reaches 81.8% completion, what is the total pressure in the flask?
The total pressure in the flask is determined by the ideal gas law which is 4.00 atm.
This law states that the pressure of a gas is equal to its number of moles times its temperature divided by its volume. For this question, we need to calculate the number of moles of each gas before the reaction.
Methane has a molar mass of 16.04 g/mol,
so 253 mL of methane would be 1.106 moles.
Chlorine has a molar mass of 35.45 g/mol,
so 891 mL of chlorine would be 2.587 moles.
Thus, the total number of moles in the flask is 3.693.
Next, we need to calculate the number of moles that have reacted. 72.5% of the reaction has been completed, so 0.725 moles of the 3.693 moles have reacted.
Finally, the total pressure in the flask is equal to the number of moles times the temperature divided by the volume. This gives a pressure of 4.00 atm.
Learn more about pressure:
brainly.com/question/28012687
#SPJ4
What term describes a solution which is in equilibrium with an undissolved solute?
A) precipitating
B) aqueous
C) saturated
D) unsaturated
E) supersaturated
The mixture is categorized as a saturated solution. It is said that the solution is in equilibrium.
Saturated solution: What is it?A solvent is a substance that contains as much solute as is actually capable of breaking down under the conditions within which it is expressed. By examining components and the solution's characteristics, one can understand how a mixture can reach a condition of absorption.
What takes place when a solution achieves saturation?At some time, the solution reaches its saturation point. This suggests that perhaps if you add more of the chemical, it might prevent dissolving as well as stay solid. The frequency depends on the molecular interactions between the solution and the molecule.
To know more about saturated solution visit:
https://brainly.com/question/1851822
#SPJ4
suppose there is a gaseous mixture of nitrogen and oxygen. if the total pressure of the mixture is 470 mmhg , and the partial pressure of nitrogen is 220 mmhg , calculate the partial pressure of oxygen in the mixture using dalton's law.
The partial pressure of oxygen in the mixture is 250 mmHg by using given dalton's law as per follow.
According to Dalton's law, the combined pressure of a gas mixture is equal to the sum of the individual partial pressures of its constituents.
In this instance, the total pressure of the mixture (Ptotal) as well as the partial pressure of b (P N2) are both provided.
As a result, the partial pressure of oxygen (P O2) can be determined using the formula: PO2 = Ptotal - PN2 = 470 mmHg - 220 mmHg = 250 mmHg
Nitrogen and oxygen are present as a gaseous mixture. The partial pressure of oxygen (P O2) is equal to 250 mmHg if the overall pressure of the mixture is 470 mmHg and the partial pressure of nitrogen is 220 mmHg.
Learn more about partial pressure here:
https://brainly.com/question/13199169
#SPJ4
the gas in a 275.0 ml piston experiences a change in pressure from 1.00 atm to 3.10 atm. what is the new volume (in ml) assuming the moles of gas and temperature are held constant?
The new volume of the gas is 832.5 ml assuming the moles of gas and temperature are held constant
Since the temperature and number of moles of gas are held constant, the pressure-volume relationship of the gas follows Boyle's Law, which states that the pressure and volume of a gas are inversely proportional at constant temperature.
the gas in a 275.0 ml piston experiences a change in pressure from 1.00 atm to 3.10 atm.
P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.
V2 = V1 * P1 / P2
= 275.0 ml * 1.00 atm / 3.10 atm
= 832.5 ml
hence, The new volume of the gas is 832.5 ml.
Learn more about volume here:
https://brainly.com/question/13338592
#SPJ4
Is the dissolution reaction of ammonium nitrate enthalpy favored? a. No, it is not enthalpy favored since the chemical system loses energy. b. Yes, it is enthalpy favored since the chemical system loses energy. c. No, it is not enthalpy favored since the chemical system gains energy. d. Yes, it is enthalpy favored since the chemical system gains energy. e. No, it is not enthalpy favored since the chemical system neither gains nor loses energy.
c. No, it is not enthalpy favored since the chemical system gains energy.
What causes ammonium nitrate to dissolve?An endothermic reaction occurs when ammonium nitrate dissolves in solution. As the ammonium nitrate breaks, heat energy from the environment is absorbed, causing the area to feel cold.
NH4NO3(s) = NH4 + (aq) + NO3 (aq) H = +28.
What transpires when water is dissolved with ammonium nitrate?Because the reaction is endothermic, meaning it takes energy from the surroundings in the form of heat, the beaker turns cold when ammonium nitrate is mixed with water. As a consequence, the endothermic reaction of hydrating ammonium nitrate leads the beaker to become cold.
What do you mean by dissolution?A solute in a gaseous, liquid, or solid phase could dissolve in a solvent to produce a solution through to the process of dissolution.
Learn more about ammonium nitrate here:
brainly.com/question/11978995
#SPJ4
Label the plate boundaries and name a geologic feature that occurs at each plate
boundary
Note that the three types of plate boundaries are:
TransformConvergent and Divergent plate boundaries.What geological features can be found in each type of boundary?The geological features that can occur in each type of boundary are given as follows:
1) Divergent plate boundaries occur when plates move apart and magma rises to the surface to form new crust. A geologic feature that occurs at a divergent plate boundary is a mid-ocean ridge.
2) Note that convergent plate boundaries occur when plates collide and one plate is forced beneath the other, into the mantle. A subduction zone is a geologic feature at a convergent plate boundary.
3) In the case of transform plate boundaries, it occurs when plates slide past each other along a transform fault. A geologic feature that occurs at a transform plate boundary is a strike-slip fault.
Learn more about Plate Boundaries;
https://brainly.com/question/29712139
#SPJ1
what is meant by the statement “fibers have a high length to width ration”?
"Fibers have a high length to width ratio," which implies that fibers are substantially longer than they are wide. Fibers, in other words, are long, thin elongated structures.
What is meant by the statement “fibers have a high length to width ration”?The phrase "fibers have a high length to width ratio" suggests that fibers are much longer than they are wide. Fibers, in other terms, are elongated structures having a long, thin form. Fibers have qualities that make them valuable in a variety of applications, such as the fabrication of textiles, paper, and composites, due to their high length to width ratio. Fibers having a high length to width ratio, for example, can be woven or twisted together to make strong, durable textiles.
To know more about fibers,
https://brainly.com/question/28204671
#SPJ1
if 50 g of sugar were added to 100 g of water at 20 oc to form a solution, how would you describe the solution?
Answer: Sugar is said to have a solubility of
180 g in
100 g of water at
20∘C.his tells you that dissolving that much sugar per
100 g
of water would produce a saturated solution.
A saturated solution is a solution in which the rate at which solid particles are dissolved is equal to the rate at which dissolved solute particles reform the solid.
Simply put, a saturated solution is a solution that cannot dissolve more solute than what is already dissolved.