what is the most important reason to create a backup of your files somewhere other than your computer? (1 point)

Consider the results of a hypothesis test, which indicate that not enough information exists to reject the null hypothesis.

Hypothesis testing is a sort of statistical reasoning that uses information from a sample to draw conclusions about a population attribute or population probability. The parameter and distributions are first estimated with reasonable certainty. Given that it is the underlying assumption, the hypothesis 1 is often referred to as H0. The alternative hypothesis is therefore defined as the polar opposite of what is stated in the null hypothesis (designated Ha). The hypothesis-testing method assesses whether or not H0 might well be rejected using sample data. the statistical finding that, if H0 is disproved, the replacement assumption Ha is correct.

To know more about hypothesis test visit:

https://brainly.com/question/14587073

#SPJ4

Four drivers that set the information strategy and determine information system investments include corporate strategy, technology innovations, innovative thinking, and business process improvements.

The four drivers that set the information strategy and determine information system investments are important factors that influence the development and implementation of information systems within an organization. These drivers are:

Learn more about business process improvements: https://brainly.com/question/14979506

#SPJ4

A monthly loan payment of $200 is something you can manage. When will the debt be paid off? As a hint, a while time will be beneficial. Just the interest will be a perpetual payment, which is 100/0.005 = 20,000.

In computer programming, a loop is a set of commands that are regularly carried out up until a particular condition is satisfied. Typically, a specific action is carried out, such as acquiring and altering a piece of information, and then a criteria is checked, such as evaluating whether the count had reached a specific value.

Calculation

We will calculate the present value of a 100 dollars monthly payment discounted at 6% annual rate compounded monthly.

the monthly rate will be the annual rate divided by 12 months within a year:

6% / 12 = 0.5% = 0.005

A perpetuity will be a payment wich only cover the interest :

100 / 0.005 = 20,000

To know more about loop visit:

https://brainly.com/question/18168133

#SPJ4

The best network model for such an institution would be a Local Area Network (LAN).

A Local Area Network (LAN) is a computer network that is designed to connect computers, printers and other devices in a limited geographic area, such as a single building or office. A LAN typically consists of two or more networked devices which are connected via Ethernet cables, switches, and routers, as well as wireless access points.

A LAN is a network that is confined to a relatively small area, usually a single building or a group of buildings. It connects computers, printers, and other devices in a particular geographic area, allowing users on the network to share resources and communicate with each other. This makes a LAN ideal for an educational institution like the University of Kingston, as it allows students and teachers from different departments to easily exchange data.

To learn more about Local Area Network
https://brainly.com/question/8118353
#SPJ4

Answer:

3, 7

Explanation:

The condition num[i] <= 7 ensures that only numbers which are 7 or below are diaplayed

This would be 7 and 3  in that order.

The choice gives the output in ascending sequence so the correct choice is that last option : 3, 7

The decoding of the following code using the Sardinas-Patterson approach. Show each step. C = {1001, 1011,111,10, 1110}.the binary sequence of codes.

Check the decodability of the following code using sardinas-patterson method?

prefix code: No code in a codeword begins with any other code.

Code that can only be cracked once: merely a prefix code or codes that can only be decoded one way

Using the Sardinas-Patterson approach, determine whether a given code is a UDC.

>> Lookup prefix

if identified

Add the dangling suffix to the list of codewords.

If the dangling suffix of a codeword is the same as any other code, the codeword cannot be decoded with absolute certainty.

If there isn't a unique dangling suffix left, it's a prefix code or UDC.

if not discovered

>This is UDC

Let a = "0,10,0110" where 0 is a prefix of 0110 and 110 is the dangling suffix.

provided codeword c = 1001, 1011, 111, 10, 1110.

Here, 111 is the prefix of 1110, while 0 is the dangling suffix.

10 is a prefix of 1001, 1011, and 01, 11 is the dangling suffix.

give the codeword a dangling suffix

=> { 1001, 1011, 111, 10, 1110, 0, 01, 11 }

Here, 0 is the prefix of 01, and 1, is the dangling suffix.

11 precedes 111, and 1 serves as the dangling suffix.

hanging suffix added to codeword

=> { 1001, 1011, 111, 10, 1110, 0, 01, 11, 1, 1}

This codeword was not uniquely decodable because code 1 was repeated throughout.

Decoding of codeword c=1001, 1011, 111, 10, and 1110 is hence not unique.

To learn more about sardinas-patterson method refers to:

https://brainly.com/question/30512476

#SPJ4

The decoding of the following code using the Sardinas-Patterson approach. Show each step. C = {1001, 1011,111,10, 1110}.the binary sequence of codes.

Check the decodability of the following code using sardinas-patterson method?

prefix code: No code in a codeword begins with any other code.

Code that can only be cracked once: merely a prefix code or codes that can only be decoded one way

Using the Sardinas-Patterson approach, determine whether a given code is a UDC.

>> Lookup prefix

if identified

Add the dangling suffix to the list of codewords.

If the dangling suffix of a codeword is the same as any other code, the codeword cannot be decoded with absolute certainty.

If there isn't a unique dangling suffix left, it's a prefix code or UDC.

if not discovered

>This is UDC

Let a = "0,10,0110" where 0 is a prefix of 0110 and 110 is the dangling suffix.

provided codeword c = 1001, 1011, 111, 10, 1110.

Here, 111 is the prefix of 1110, while 0 is the dangling suffix.

10 is a prefix of 1001, 1011, and 01, 11 is the dangling suffix.

give the codeword a dangling suffix

=> { 1001, 1011, 111, 10, 1110, 0, 01, 11 }

Here, 0 is the prefix of 01, and 1, is the dangling suffix.

11 precedes 111, and 1 serves as the dangling suffix.

hanging suffix added to codeword

=> { 1001, 1011, 111, 10, 1110, 0, 01, 11, 1, 1}

This codeword was not uniquely decodable because code 1 was repeated throughout.

Decoding of codeword c=1001, 1011, 111, 10, and 1110 is hence not unique.

To learn more about sardinas-patterson refers to:

https://brainly.com/question/30508060

#SPJ4

The dungeon lab is displayed using a pseudocode that has been stubbed.

The dungeon lab is displayed using a pseudocode that has been stubbed.

The Main contains calls to the function stubs and comments that describe the flow of your programme. Any constants you want should be declared in your header file (dungeon.hpp), along with any necessary function definitions.

// dungeon.hpp

#ifndef DUNGEON_HPP

#define DUNGEON_HPP

const int ROWS = 10;

const int COLS = 10;

// function declarations

void createDungeon(char dungeon[ROWS][COLS]);

void displayDungeon(char dungeon[ROWS][COLS]);

void placePlayer(char dungeon[ROWS][COLS], int playerRow, int playerCol);

void movePlayer(char dungeon[ROWS][COLS], int &playerRow, int &playerCol, char moveDirection);

#endif

// dungeon.cpp

#include <iostream>

#include "dungeon.hpp"

using namespace std;

void createDungeon(char dungeon[ROWS][COLS]) {

// Initialize all elements in dungeon array to '.'

for (int i = 0; i < ROWS; i++) {

for (int j = 0; j < COLS; j++) {

dungeon[i][j] = '.';

}

}

}

void displayDungeon(char dungeon[ROWS][COLS]) {

// Display dungeon array

for (int i = 0; i < ROWS; i++) {

for (int j = 0; j < COLS; j++) {

cout << dungeon[i][j] << " ";

}

cout << endl;

}

}

void placePlayer(char dungeon[ROWS][COLS], int playerRow, int playerCol)

{

// Place 'P' in player's position

dungeon[playerRow][playerCol] = 'P';

}

void movePlayer(char dungeon[ROWS][COLS], int &playerRow, int &playerCol, char moveDirection) {

// Move player based on moveDirection

// If moveDirection is 'U', decrement playerRow

// If moveDirection is 'D', increment playerRow

// If moveDirection is 'L', decrement playerCol

// If moveDirection is 'R', increment playerCol

switch (moveDirection) {

case 'U':

playerRow--;

break;

case 'D':

playerRow++;

break;

case 'L':

playerCol--;

break;

case 'R':

playerCol++;

break;

default:

break;

}

// Place 'P' in new player position

dungeon[playerRow][playerCol] = 'P';

}

// main.cpp

#include <iostream>

#include "dungeon.hpp"

using namespace std;

int main() {

// Create dungeon

char dungeon[ROWS][COLS];

createDungeon(dungeon);

// Display dungeon

displayDungeon(dungeon);

// Place player in starting position

int playerRow = 0;

int playerCol = 0;

placePlayer(dungeon, playerRow, playerCol);

// Display dungeon with player

displayDungeon(dungeon);

// Move player

char moveDirection;

cout << "Enter move direction (U, D, L, R): ";

cin >> moveDirection.

The complete question is

you are to create an empty project with a main, dungeon.cpp, and dungeon.hpp. You will use these to create a stubbed, pseudocode version of the dungeon lab. Main should consist of comments that lay out your program flow along with calls to the function stubs. Your header file (dungeon.hpp) should have any constants that you will need along with function declarations. Each function should have the proper return type and parameters. Your function source file (dungeon.cpp) should consist of stubs for the functions along with comments (pseudocode style) that describe what that function will do. Remember that all functions need proper return types and parameters as described in the Lab 3 document and compile and run with your main.

To learn more about dungeon.hpp refer to:

https://brainly.com/question/30498226

#SPJ4

According to the following assertion, import 'package:firefly/armada.dart' is a valid url.

Websites have individual addresses to make it easier for users to find them, much like residences and structures have a street address. These are known as URLs on the Internet (Uniform Resource Locators).

Do: To access a desired website, type its URL into the address field. Note: Typically, a URL (Uniform Resource Locator) begins with either http:// or https:// The precise address to a particular webpage is given by a URL. There is no case distinction in URLs; uppercase letters have no impact.

To know more about URL visit:

https://brainly.com/question/10065424

#SPJ4

"Write lines of code which calculate statement execution counts and compare these values for a range of inputs" describes a valid way to compare the efficiency of two equivalent algorithms written in Java.

To compare the efficiency of two equivalent algorithms, one can measure the number of basic operations (such as additions, multiplications, etc.) that each algorithm performs for a range of inputs. This can be done by writing code to keep track of the number of statements executed, and comparing these values. This method gives a more accurate picture of the efficiency of the algorithms, as it takes into account the actual operations performed by each algorithm, rather than just the number of lines of code or the accuracy of the output. This is considered a more meaningful way to compare the efficiency of algorithms.

To compare the efficiency of two equivalent Java algorithms, measure the number of basic operations performed by each algorithm for a range of inputs. This gives a more accurate picture of the efficiency and takes into account the actual operations performed. Testing the algorithms with different input sizes helps to verify their accuracy and better understand their efficiency.

Learn more about algorithms here:

https://brainly.com/question/21172316

#SPJ4

It's false. While it is true that some types of files are less likely to contain viruses than others, there is no guarantee that a file is safe just because it is a picture or graphic.

Any type of file, including pictures and graphics, can be used to spread malware or viruses. For example, a maliciously crafted image file can contain hidden code that, when opened, infects your computer with a virus. Additionally, many image formats, such as JPEG or PNG, can be used to hide malicious code within the image file, making it difficult for antivirus software to detect the threat. It is always a good idea to exercise caution when downloading files from the Internet and to only download files from reputable sources. Additionally, it is recommended to regularly scan your computer for viruses and other types of malware to ensure that your system remains protected.

Learn more about viruses in computer: https://brainly.com/question/17645865

#SPJ4

A third-party vendor's login information was stolen by hackers, who used it to access 56 million debit and credit cards in the US and Canada.

The capacity to access products or services or borrow money with the idea that you'll pay for them later is known as credit. Creditors—lenders, retailers, and service providers—grant credit based upon the belief that you can be relied upon to repay the amount you borrowed plus any associated finance charges. You are said to be credit - worthy, or to have "excellent credit," to the extent that lenders believe you are deserving of their confidence. If you want to borrow money for large expenditures like a car or a home, like a mortgage, you'll need to have good credit. Or perhaps you wish to benefit from the ease and purchasing protection that a credit can offer.

To know more about credit visit:

https://brainly.com/question/12427467

#SPJ4

The range of a set of data is the difference between its highest and lowest value. The simplest type of measure of dispersion is the range.

To Learn more About dispersion is the range Refer To:

https://brainly.com/question/10656631

#SPJ4

The most likely cause of this anomaly is a failing CMOS battery, which is responsible for maintaining the computer's time and date settings when the computer is turned off.

Your laptop's BIOS firmware, which is in charge of starting up your laptop & configuring data flow, is powered by the CMOS battery. If your laptop has trouble starting up, if drivers disappear, or if the date and time on your laptop are off, your CMOS battery may have died.

Even without a CMOS battery, your board and computer would be able to boot just fine. The time and date will be changed, and all of your Bios will be reset.

To know more about CMOS battery visit :

https://brainly.com/question/14892541

#SPJ4

... 2, 1); is a time duration of 1 hour, 2 minutes, and 3 seconds. The function Object() { [native code] } should respect the order seconds, minutes, and hours.

A parameter, which derives from the Ancient Greek words pará, which means "beside, subsidiary," and v, which means "measure," is essentially any quality that aids in identifying or categorising a certain systems (meaning an event, project, object, situation, etc.). In other words, a parameter is a component of a system that is crucial or useful for identifying the system or assessing its functionality, status, or other characteristics. In some fields, such as mathematics, computer programming, architecture, economics, logic, linguistics, and electronica production, the term "parameter" has more precise definitions.

In addition towards its technical applications, it also has broader meanings, particularly in non-scientific situations. For example, the terms "test parameters" and "game play parameters" refer to defining qualities or boundaries.

To know more about  parameter visit :

https://brainly.com/question/30395943

#SPJ4

Data obtained supports the following hypothesis: Swallows killed on roads have different wing forms than the rest of the population.

To learn more about hypothesis refer to:

https://brainly.com/question/27809115

#SPJ4

The processor will first enter the protected mode. This is a state in which the processor is operating under the control of the operating system and is able to access resources such as memory and I/O devices.

An operating system (OS) is a program that allows a user to interact with computer hardware, such as memory, storage, peripheral devices and processors. It acts as the interface between the user and the hardware and allows them to interact with each other.

In this mode, the processor will examine the instruction to read the file from the hard drive and will set up the necessary data structures to service the request.
The processor will then use an interrupt to request the hard drive controller to begin the process of retrieving the file. The controller will then read the file from the hard drive and return it to the processor. The processor will then store the contents of the file in memory and return control to the user program.
Once the instruction is completed, the processor will exit the protected mode and return to the user mode. In the user mode, the processor will continue executing instructions from the user program, which may include further instructions to manipulate the contents of the file that was retrieved.

To learn more about operating system
https://brainly.com/question/22811693
#SPJ4

The question is asking for hourly readings, rather that taking readings every minute. It should work if you change your code to:

True.

try it on python

Click a data type button or click a data type at the data type drop-down list and the Field Name field name is automatically selected.

When you select a data type button or choose a data type from the data type drop-down list, the system automatically selects the "Field Name" field. This field is where you can enter a name for the data field you're creating. The data type you choose determines what type of data can be entered into the field, such as text, numbers, or dates. By automatically selecting the "Field Name" field, the system makes it easier for you to quickly create a new data field without having to navigate to the field name manually.

The process of choosing a data type and naming the field is an important step in creating a database or a spreadsheet. By selecting a data type, you define the type of information that can be stored in the field, such as text, numbers, dates, or yes/no values. The data type you choose also determines how the information in the field will be formatted and processed by the software.

Learn more about data type here:

https://brainly.com/question/29417603

#SPJ4

Enter an integer, the input ends if it is 0: 2 -1 3 0

The number of positives is 3 , The number of negatives is 1, The total is 5.0

The average is 1.25.

To learn more about JavaScript refer :

brainly.com/question/30501759

#SPJ4

Interorganizational, personal, enterprise, and workgroup information system types are categorised according to their spheres of impact; each kind completely addresses the components related to people, processes, and human structure.

A mix of hardware, software, and communication networks make up an information system, which is used to gather meaningful data, particularly inside an organisation. Information technology is used by many firms to carry out and manage operations, engage with customers, and outperform rivals.

Hardware is the technology's actual physical part. Among them are laptops, hard drives, keyboards, iPads, etc. While its speed and storage capacity have improved dramatically, hardware costs have dropped quickly. But now, there is a lot of worry about how using hardware may affect the environment. These days, storage services are provided through the cloud, which is accessible through communication networks.

Learn more about Information system here:

https://brainly.com/question/28530075

#SPJ4

This section describes several organelles found in eukaryotic cells, including the nucleus, endoplasmic reticulum, Golgi apparatus, lysosomes, and peroxisomes.
Table 12-1 shows the size of organelles relative to the cell. It shows that the nucleus is the largest organelle, followed by the endoplasmic reticulum, Golgi apparatus, lysosomes, and peroxisomes.
Table 12-2 shows the size of organelles relative to one another. It shows that the nucleus is the largest organelle, followed by endoplasmic reticulum, Golgi apparatus, lysosomes, and peroxisomes.

What is eukaryotic?
Eukaryotes are complex organisms whose cells contain a nucleus and other organelles that are enclosed within membranes. They are the main type of living organisms on Earth, and include animals, plants, fungi, and protists. Eukaryotes can be as small as single-celled organisms or as large and complex as humans.

To know more Eukaryotic
https://brainly.com/question/23564355
#SPJ4

Divide the string str into three sections: a numeric section, an alphabetic section, and a section with special characters.

function splitString(str) let alpha = ""; let num = ""; let special = ""; for (let i=0; i= 'A' && str[i] = 'Z') || (str[i] >= 'a' && str[i] ='z')) alpha+=str[i]; otherwise special+=str[i]

Document.write(special+" "); / Avanitrachhadiya2155 provided the code to this project.

Determine the string's length.

If ch is a digit, then scan each character in the string one at a time before appending it to the res1 string.

Alternatively, if (ch is an alphabet) append to string res2. Otherwise, append to string res3.

Printing all the strings will result in one string with a number component, another with a non-numeric component, and the last one with special characters.

Learn more about String here:

https://brainly.com/question/14528583

#SPJ4

Confidentiality: PIN must be kept confidential and only accessible to the user. Integrity: Transactions must be accurately recorded and stored in a secure manner. Availability: The ATM should be available.

Transaction can be defined as an exchange of goods, services, or financial assets. It is a process of transferring ownership from one party to another. Transactions can take place between two parties, or multiple parties, and can involve the exchange of goods, services, or financial assets. Transactions are often recorded in a ledger, which can be either physical or digital. Transactions are the core of any business and are important for tracking revenue and expenses.

To know more about Transactions visit:

https://brainly.com/question/17143087

#SPJ4

Create the removeEvens() method, which takes an array of integers as a parameter and produces a new array of integers having only the odd values from the original array. The main program displays the returned array's values.

The new array will be shorter in length and should not contain any blank entries if the original array contains even numbers.

For instance, if the array provided to the removeEvens() method is [1, 2, 3, 4, 5, 6, 7, 8, 9], the method returns and the program outputs:

[1, 3, 5, 7, 9]

Ex: The removeEvens() method returns and the program output is as follows if the array supplied to the method is [1, 9, 3].

[1, 9, 3]

bring in java.util.Arrays;

LabProgram in a public class

removeEvens(int [] nums) is a public static int function.

Here, you must enter your code.

Public static void main (String [] args)

removeEvens(input); int [] result = "int [] input = 1,2,3,4,5,6,7,8,9";

Method of assistance Int[] is transformed into a String System via the function arrays.toString(). Print [1, 3, 5, 7, 9] using the following code: out.println(Arrays.toString(result));

To Learn more About removeEvens() method, Refer To:

https://brainly.com/question/15761509

#SPJ4

Below is a Python program that calculates the amount and cost of purchasing flooring based on user inputs:

length = float(input("Enter the length of the room: "))

width = float(input("Enter the width of the room: "))

cost_per_sq_ft = float(input("Enter the cost of the flooring per square foot: "))

square_feet = length * width

flooring_cost = square_feet * cost_per_sq_ft

tax = flooring_cost * 0.07

total = flooring_cost + tax

print("Square feet:", square_feet)

print("Flooring:", flooring_cost)

print("Tax:", tax)

print("Total:", total)

This program prompts the user to enter the length and width of the room, and the cost of the flooring per square foot. It then calculates the total square feet, flooring cost, tax (7% of the flooring cost), and the total amount due.

Therefore, The output is displayed and identified for the total square feet needed, the calculated cost of the flooring, tax amount, and the total (final cost). The results are not rounded or truncated.

Learn more about python program from

https://brainly.com/question/26497128

#SPJ1

Answer:

2

Explanation:

This code segment iterates through the array checks to see if each element equals y if so, increments the counter variable count

Essentially, this code is taking in two parameters an array x and an integer y and counting the number of times y appears in the array x

look(numList, 1) counts the number of times the integer 1 appears in numList

1 appears two times and therefore 2 is the value returned by the function and therefore the answer

   public static int countMultiples(int low, int high, int x) {

       int count = 0;

       for (int i = low; i <= high; i++) {

           if (i % x == 0) {

               count++;

           }

       }

       return count;

   }

A "GTP cap," or area at the end of a polymerizing microtubule where GTP hydrolysis has not yet taken place, stabilizes microtubules, according to the core paradigm of microtubule biology.

To Learn more About GTP cap, Refer To:

https://brainly.com/question/14868565

#SPJ4

the useradd command should be used to add user accounts for admin, sam, joe, amy, sara, and all five users. Below is a description of the solution.

Add user accounts for admin, Amy, Sam, Joe, Amy, and Sara.

sudo adduser sam is the command to add each user account (including all five users).

Adduser: sudo joe

adduser amy in sudo

adduser sara with sudo

Make sure that the only person with global sudo access is the admin.

Usermod -aG sudo admin is the command to add admin to the sudo group.

Step 3: a User Group and Collaborative Folder should be made.

Systematically include a group of engineers.

In order to include the group:

engineers sudo addgroup

Join the controlled group with users Sam, Joe, Amy, and Sara.

The following command will add all four users to the engineer's group:

engineers sam sudo usermod -aG

engineers joe sudo usermod -aG

engineers Amy - sudo usermod

Engineering Sara with sudo usermod -aG

At /home/engineers, make a shared folder for this group.

To create the shared folder, issue the following command: Mkdir /home/engineers

Change the group of engineers' ownership of the shared folder for the new engineers.

To command the engineering group to take ownership of the shared folder for engineers: sudo chown: engineers engineers

Learn more about command here:

https://brainly.com/question/3632568

#SPJ4