A transceiver, often known as a transmitter or receiver, transmits and receives data between devices in a network. It converts the parallel data stream coming from the computer to the network's serial data stream and vice versa. Modern network interface cards include transceivers most of the time (NICs).
How Do You Define Transceiver (TRX)?
A transceiver, often known as a TRX, is a gadget that can send and receive signals. A transceiver typically consists of a transmitter and a receiver that share circuitry. The equipment is referred to as a transmitter-receiver, however, if the transmitter and receiver simply share a single housing. Transceivers have played a crucial role in the development of numerous technological innovations, including two-way radios, mobile phones, and the internet.
To know more Transceiver, Check out:
https://brainly.com/question/29414871
#SPJ4
.
which of the following is true? the foreign key column values in one table must have the same domain of values as the primary key column values in the related table. every table (relation) must have a foreign key. every table (relation) must have one of more primary keys.
The foreign key column values in one table must have the same domain of values as the primary key column values in the related table. It's true.
In a relational database, a foreign key is a field in one table that refers to the primary key of another table. The domain of values in a foreign key column must match the domain of values in the related primary key column. This is to ensure referential integrity, meaning that every foreign key value must correspond to an existing primary key value in the related table.
This ensures that the data in the two tables remains consistent and meaningful, even if changes are made to the data in one table. If the foreign key values did not have the same domain of values as the related primary key values, it would be possible for the foreign key values to refer to non-existent primary key values, resulting in data inconsistencies.
Learn more about a foreign key: https://brainly.com/question/13259139
#SPJ4
hajar is investigating a denial of service attack against her network. she notices that the internet control message protocol (icmp) echo replies coming into her network far exceed the icmp echo requests leaving her network. what type of attack is likely taking place? group of answer choices land
Investigating a denial of service attack on her network is Smurf Hajar. She observes that the icmp echo requests leaving her network are greatly outnumbered by the icmp echo answers entering her network.
Where is IGMP employed?One-to-many networking applications like online gaming and streaming video can be supported via IGMP, which allows for a more effective use of resources. In IPv4 networks, IGMP is employed.
A routing protocol, is IGMP?IGMP is a protocol that controls group membership; it is not a multicasting routing system. A multicast router is a router that distributes multicast packets to hosts or other routers in a network.
To know more about IGMP visit:
https://brainly.com/question/7006894
#SPJ4
a user has deleted a few files before quitting his job. no one has used his system after that. what are your chances of recovering these files? [choose all that apply.]
A user removed a few files before leaving his position. After that, nobody has used his system. highly likely to retrieve these files
By "File," what do you mean?
To remove small amounts of material from a workpiece, a tool called a file is utilized. It is typical of chores involved in the trades and pastimes of woodworking and metalworking. All computer programs and data are "written" into files, which act as the common storage unit of a computer, and "read" from files. A folder can apparently be empty before clogging up with one or more files. A file is a type of computer object that stores information that is used by software, such as data, preferences, or instructions. data and application files. The three types of files encountered on computers are files, system files, and certain other files.
Learn more about the Files here:
brainly.com/question/20262915
#SPJ4
NOTE: The given question is in complete on the portal. Here is the complete question.
QUESTION: A user has deleted a few files before quitting his job. no one has used his system after that. What are your chances of recovering these files? [choose all that apply]
(A) Very high
(B) Very low
(C) No chances
(D) None of these
write an expression that computes the integer average of the int variables exam1 and exam2 (both declared and assigned values). fill in the blank.
The correct answer is Calculate the integer average of the int variables exam1 and exam2 by writing an equation both declared and assigned values .
By the total number of integers, divide the integer sum. Since there are five integers in our example and their sum is 24, the formula is as follows: 24 / 5 = 4.8. The average value for the group of integers 4, 5, 7, 2, and 6 is 4.8. What is the typical equation? The formula used to calculate the average of the specified numbers is the summation of all entries multiplied by the total number of values. Equations used in formulas compute values using your sheet. The equal symbol (=) always appears at the beginning of a formula. You can create a simple formula using a computing operators and a constant.For instance, the equation =5+2*3 multiplies two values before adding.
To learn more about integer average click on the link below:
brainly.com/question/13584826
#SPJ4
When a new view is created, what data will be included?Data from before the view was createdData from after the view was createdData from before and after the view was createdNo data
According to the given information in the question Data from after the view was created.
By data, what do you mean?Information is data that has been transformed into a format that is useful for transfer or processing in computing. Data is information that has been transformed into basic digital form for use with modern computers and communication mediums. The singular or plural form of the subject of data is acceptable.
What is data vs information?Data is a solitary on it up of simple parts with no clear purpose. Information is a collection of facts with a logical significance when taken as a whole. Information is not a prerequisite for data. Data depend on information.
To know more about data visit:
https://brainly.com/question/29822036
#SPJ4
4. Explain why it is not a good idea to use the default names given for files and folders, such as Doc1 or New Folder?
It is not a good idea to use the default names given for files and folders, such as Doc1 or New Folder, as you will not be able to recognize between different folders and files.
What are the default names for files and folders?A folder's or any other resource's initial name is given when it is created or added to a computer.
For instance, on most computers, a new folder is created with the name "New Folder" as the default. The user can alter the default names.
Therefore, Using the default names provided for files and folders, such as Doc1 or New Folder, is not recommended because you won't be able to distinguish between different folders and files.
To learn more about default names, refer to the link:
https://brainly.com/question/15447962
#SPJ1
how are the full mla citations organized on a works cited page?
The full MLA citation implies you must go through your article to ensure that the in-text citations are correctly attributed to the conclusion.
What is MLA citation?The acronym for 'Modern Language Association' is MLA. It is a style of writing that is typically favored for language, literature, liberal arts, sociology, and other humanities fields. The Modern Language Association is regarded for fostering literature and language studies.
Citing a website in MLA necessitates citing a specific page on the website for clarity and accuracy. Here is an example of how to reference a website in MLA format:
Begin by determining who wrote the content on the website.If there is no author, start with the title, which must be enclosed in quotation marks.The website should then be named in italics, followed by a comma.The identity of the publisher must then be included. If the author is also the site's publisher, leave it out of the citation.To know more about MLA citation, visit:
https://brainly.com/question/29759224
#SPJ1
hat functions can be carried out on point cloud data using reverse engineeringsoftware? how do these tools differ from conventional 3d cad software?
Copies, duplicates, or rebuilt versions with enhancements might be the intended outcomes. The most difficult part of the reverse engineering procedure is extracting the precise geometry. More advanced technology like computed tomography or 3D scanners may also be employed for this step.
What is Reverse Engineering: How to Use Cloud of Points Effectively?Reverse engineering is the process of disassembling a part or assembly that already exists in order to gain knowledge from it in the context of mechanical engineering. Copies, duplicates, or rebuilt versions with enhancements might be the intended outcomes.The most difficult part of the reverse engineering procedure is extracting the precise geometry. More advanced technology like computed tomography or 3D scanners may also be employed for this step.A cloud of points without any topological information is collected as data while an item is being scanned. The part's outside surface is often represented by a random distribution of disconnected points. A CAD or FEA platform cannot use these data as raw models directly.The obtained scanned data must therefore be processed, cleaned, and repaired.Although the mesh associated with the scanned object may appear to be a zero thickness mesh model with shell elements, most scanners generate a cloud of points in the form of an.stl file (also known as an orphan mesh). Particularly in situations when 3D solid models are required, it is fairly essential to use a manual technique to extract the 3D body linked to the scanned item or assembly.To Learn more About reverse engineering procedure Refer To:
https://brainly.com/question/28152298
#SPJ4
IBM has a computer it calls the Blue Gene/L that can do 136.8 teracalculations per second. How many calculations can it do in a nanosecond?
The correct answer is 1.368 105 computations per nanosecond based on the information provided in the question.
What is a computer?An electronic device used to process data or information is a laptop. It is large enough to hold, retrieving, and processing data. You may already be aware of the fact that you can are using a computer to surf the Internet, send emails, type documents, and play games.
What use does a computer serve?Obtaining, analyzing, returning, and storing information are regular actions carried out by computer as part of their functions. Information systems can be categorised as input devices, automation systems, external devices, & storage devices, in that order, to assist computer systems in carrying out these tasks.
To know more about computer visit:
https://brainly.com/question/2501378
#SPJ4
which of the five internet protocol layers does an end system typically process? group of answer choices application transport network link physical
the five internet protocol layers does an end system typically process are Application Layer, Transport Layer, Network Layer, Network Interface Layer, and Hardware.
The transfer of information from sender to receiver is precisely defined by TCP/IP. The User Datagram Protocol (UDP) or the Transmission Control Protocol are the first Internet Transport Layer Protocols that application programs use to convey messages or streams of data (TCP). These protocols take the information from the application, split it up into units known as packets, add a destination address, and then transfer the packets to the Internet Network layer, the following protocol layer.
The packet is wrapped in an Internet Protocol (IP) datagram by the Internet Network layer, which also adds the header and trailer, chooses whether to deliver the datagram directly to the destination or through a gateway, and then transfers the datagram to the Network Interface layer.
When internet protocol datagrams are received, the Network Interface layer converts them into frames and sends them via a particular type of network hardware, like Ethernet or Token-Ring networks.
To know more about internet protocol:
https://brainly.com/question/27581708
#SPJ4
12.5.2 Test (CST): How Do You Read in a Networked World?
Question 21 of 25
How did personal computers and the Internet affect how people access
knowledge?
A. People got better at memorizing and remembering.
OB. People relied on their friends telling them news.
C. People could easily get information at any time.
OD. People had to go to the library to find information.
People got better at memorizing and remembering.
What are personal computers?A personal computer (PC) is a single-user, single-display digital computer. A typical personal computer assemblage consists of a central processing unit (CPU), which houses the arithmetic, logic, and control circuitry of the computer on an integrated circuit.
There are two types of computer memory, main memory, such as magnetic hard disks and special optical compact discs, or read-only memory (ROM) discs (CD-ROMs and DVD-ROMs); and various peripheral devices, such as a display screen, keyboard, and mouse.
In the 1970s, when large-scale integration made it possible to build a powerful microprocessor on a single semiconductor chip, computers small and affordable enough to be purchased by individuals for use in their homes first became practical.
Therefore, People got better at memorizing and remembering.
To learn more about Personal computer, refer to the link:
https://brainly.com/question/21556710
#SPJ1
you would like to create a disaster recovery strategy for your rds postgresql database so that in case of a regional outage the database can be quickly made available for both read and write workloads in another aws region. the dr database must be highly available. what do you recommend?
Option (2) is correct, Create a Read Replica in a different region and enable Multi-AZ on the Read Replica
What is database and example?A databases is a planned gathering of data. They enable the manipulation and storage of data electronically. Data management is made simple by databases. Let's use a database as an example. A database is used to hold information on people, their phone numbers, or other contact information in an online telephone directory.
What actual-world database would you use?For example, databases are used by your favorite apparel retailer, bank, restaurant, grocery store, online retailer, hospital, or mobile service provider to track customer, inventory, staff, and accounting data.
To know more about database visit :
https://brainly.com/question/6447559
#SPJ4
The complete question is-
You would like to create a disaster recovery strategy for your RDS PostgreSQL database so that in case of a regional outage the database can be quickly made available for both read and write workloads in another AWS Region. The DR database must be highly available. What do you recommend?
1) Create a Read Replica in the same region and enable Multi-AZ on the main database
2) Create a Read Replica in a different region and enable Multi-AZ on the Read Replica
3) Create a Read Replica in the same region and enable Multi-AZ on the Read Replica
4) Enable Multi-Region option on the main database
suppose a dynamic array currently stores 8 elements, and its capacity is 8. after removing 5 elements from it, what are the values of size and capacity?
If a dynamic array initially holds 8 elements and has a capacity of 8, the array's size will be 3 when 5 elements are removed (i.e., it will contain only 3 elements). However, the array's capacity .
is determined on how the dynamic array is implemented. If the dynamic array implementation contains a method for reducing capacity when the array size lowers, then the capacity may be lowered as well. For example, if the implementation decreases the capacity by half when the array size is less than or equal to half of the current capacity, the array capacity will be lowered to 4 (i.e., half of the starting capacity of 8) if 5 items are removed. However, If the implementation does not lower the capacity as the array size drops, the capacity will stay at 8 even if the array only includes 3 elements.
learn more about elements here:
https://brainly.com/question/13025901
#SPJ4
A plasma protein essential for blood coagulation is
A) albumin alpha.
B) fibrinogen.
C) immunoglobulin A.
D) metalloprotein D.
E) lipoprotein C.
B) Fibrinogen and A) plasma protein essential for blood coagulation .
What is coagulation ?Coagulation is a process in which liquid particles come together to form a solid mass. It occurs in biological and chemical systems, and is typically the result of interactions between proteins and other molecules. In the body, coagulation is primarily used to form clots in order to stop bleeding from a cut or wound. This is made possible by a series of reactions between proteins, lipids, and other substances that form a mesh-like network to form a clot.
Coagulation is an important part of the body’s clotting cascade and involves a complex system of enzymes and proteins that interact with each other. Coagulation also occurs in the food industry, where it is used to produce cheese, yogurt, and other dairy products. In addition, it is used to produce a variety of other products in the pharmaceutical, chemical, and food industries.
To learn more about coagulation
https://brainly.com/question/12077625
#SPJ1
The code that a programmer writes is called ____ code.
The code that a programmer writes is called source code.
What is meant by source code?
Source code is generally understood to mean programming statements that are created by a programmer with a text editor or a visual programming tool and then saved in a file. Object code generally refers to the output, a compiled file, which is produced when the Source Code is compiled with a C compiler.As an example, when a programmer types a sequence of C programming language statements into Windows Notepad and saves the sequence as a text file, the text file now contains source code. Source code and object code are sometimes referred to as the before and after versions of a compiled computer program.Source code (also referred to as source or code) is the version of software as it is originally written (i.e., typed into a computer) by a human in plain text (i.e., human readable alphanumeric characters).To learn more about source code refers to:
https://brainly.com/question/4593389
#SPJ4
what factors should you consider when positioning input and output devices? a.ensure that there is proper lighting on your desk to illuminate the screen. b.ensure that there is enough room on your desk to stack them on top of each other. c.ensure that the monitor is located at the edge of the desk to maximize work area. d.ensure that they can be used without exerting strain, especially on the arms / wrists and back / neck.
When positioning input and output devices, consider ergonomics, desk space, lighting, monitor placement, cable management, and user comfort to create a comfortable and efficient work environment.
When positioning input and output devices, there are several factors to consider, including:
Ergonomics: Ensure that the devices can be used without exerting strain, especially on the arms, wrists, back, and neck.Desk space: Ensure that there is enough room on your desk to place the devices without crowding.Lighting: Ensure that there is proper lighting on your desk to illuminate the screen, reducing eye strain.Monitor placement: Ensure that the monitor is positioned at the correct distance from the user and at the appropriate height, reducing neck and eye strain.Cable management: Ensure that cables are neatly organized and do not impede the use of the devices.Comfort: Ensure that the devices are positioned in a way that allows the user to comfortably reach them and work for extended periods of time.By considering these factors when positioning input and output devices, you can create a comfortable and efficient work environment that helps reduce the risk of repetitive stress injuries and other workplace health issues.
Learn more about Cable management here:
https://brainly.com/question/29637293
#SPJ4
what button do you click on to end a proctored assignment?
Click Exit to complete your task when you are finished. The proctoring session ends when you leave the assignment.
When should I finish a Proctorio session?To submit the quiz after finishing it, click "Submit Quiz" in the bottom right corner of the page. In the banner message that will show up at the top of your screen, click "here" to end the Proctorio session.
Your instructor may design assignments that, at the very least, need permission before you can begin or submit your assignment attempt. One such assignment is a proctored exam.
To submit the quiz after finishing it, click "Submit Quiz" in the bottom right corner of the page. In the banner message that will show up at the top of your screen, click "here" to end the Proctorio session.
To learn more about proctoring session refer to:
https://brainly.com/question/29611043
#SPJ4
which statements about encapsulation are true? check all that apply group of answer choices larger programs require a mechanism to organize code into related units larger than a class
A - The act of enclosing one or more elements inside of a physical or logical container is known as encapsulation. B - Encapsulation limits access to implementation information in object-oriented programming.
a method for merging many data members and the member functions that are used on those data members into a single entity. Explanation: Encapsulation is an OOPS mechanism that implements the member functions on multiple data members into a single unit by combining the members of those data members. Although encapsulation and information hiding are similar concepts, the phrase is frequently used to refer to information hiding's practical application, particularly in object-oriented programming. The practise of concealing an object's or function's specifics is known as information hiding.
To learn more about Encapsulation click the link below:
brainly.com/question/29563804
#SPJ4
you have a windows 10 computer that is shared by multiple users. you want to allow non-administrative users to install devices that use third-party drivers. users should be able to install the device without prompts for administrative credentials. users should only be able to install devices that use the drivers that you specifically identify. you copy the necessary drivers to the computer. you configure the device path registry key to identify the folder where the drivers are located. a standard user logs on and tries to install the device. they receive a prompt for administrative credentials. what should you do?
In order to allow non-administrative users to install devices that use third-party drivers without prompting for administrative credentials, you need to enable driver installation for non-administrators. To do this, you can use the Group Policy Editor.
What is non-administrative users ?Non-administrative users are those who do not have administrative privileges on a computer system. They do not have access to the system’s most important functions and settings and are limited in their ability to make changes to the system, install applications, or access system resources. Non-administrative users typically have limited access to files or folders, and may be prevented from downloading or installing software or making changes to the system. Non-administrative users may be referred to as standard users or guest users, depending on the system.
Open the Group Policy Editor and navigate to Computer Configuration > Administrative Templates > System > Driver Installation. Enable the policies titled “Allow non-administrators to install drivers for these device setup classes” and “Code signing for device drivers”. Set the “Allow non-administrators to install drivers for these device setup classes” policy to “Enabled” and specify the folder path where the drivers are located. Set the “Code signing for device drivers” policy to “Enabled”.
To learn more about non-administrative users
https://brainly.com/question/29554975
#SPJ4
you want to change the end date for multiple line items within your campaign and plan to use structured data files (sdfs) for bulk editing. what's the first step when using sdfs?
When using SDFs, the first thing to do is download the template and make the necessary adjustments.
What is template and its uses?In order to construct common document kinds like letters, fax forms, or envelopes, templates are pre-formatted documents. The following are some perks of using templates: Employing templates allows making documents easier.
Why would you use a template?Templates are customizable project blueprints that cut down on duplication of effort and act as a springboard for fresh work. They are already pre-formatted and include some repetitive information. You can develop custom, tasks, reports, and other items using templates rather than having to begin from scratch each time.
To know more about template visit :
https://brainly.com/question/28626946
#SPJ4
suppose two hosts, a and b, are separated by 4 hops and the transmission rate at each hop is 1 mbps. assuming the packet size is 12000 bits, ignoring other delays like propagation delay, what would be the end-to-end delay in transmitting the packet from a to b?
How long does it take a 1,000 byte packet to travel. Thus, combining the transmission delay and the propagation delay will yield the total time. The needed total time is 4 + 10 = 14 milliseconds.
The length of the packet will determine how long the transmission delay is, whereas the propagation delay is the amount of time required for a bit to get to the other end of the network. Sending a packet made up of L bits from source to destination across a route made up of N links, each moving at a pace of R, results in an end-to-end latency of (NL/R). Where d is the distance and s is the wave propagation speed, propagation delay equals d / s. The speed of light, or s=c, applies to wireless communication.
To learn more about transmission click the link below:
brainly.com/question/15884673
#SPJ4
If you take Galante’s main premise about what made the United States so vulnerable to the Russian attack, what sorts of changes might need to be made to prepare us for a similar attack? Where should we focus our efforts?
Answer:
It is generally recommended to focus on improving cybersecurity measures, including implementing strong encryption protocols, regularly updating software and systems, and providing cybersecurity training to employees. Additionally, increasing international cooperation and information sharing among government agencies and private organizations can help to better defend against potential cyber attacks.
what method should never be used to thaw food? place the item in the cooler place the item on a prep counter microwave the item cook the item
Placing the item on a prep counter should never be used to thaw food. It can cause bacteria to grow and create a food safety hazard.
Placing the item on a prep counter is a method that should never be used to thaw food. This method can lead to food safety hazards as it can cause bacteria to grow and multiply rapidly on the surface of the food. Bacteria can grow between 40°F and 140°F, which is known as the "Danger Zone." When food is thawed at room temperature, it can reach these temperatures, which can cause bacteria to grow and multiply. This can cause foodborne illness and spoil the taste, texture, and nutritional value of the food.
Instead of placing food on a counter to thaw, it is recommended to use the refrigerator, microwave, or cook the item methods. When thawing food in the refrigerator, it is important to allow enough time for the food to thaw safely and thoroughly. When thawing food in the microwave, it is important to cook the food immediately after thawing to prevent bacteria from growing. When cooking the food to thaw, it is important to follow safe cooking practices and cooking temperatures to ensure the food is thoroughly cooked and safe to eat.
Learn more about food here:
https://brainly.com/question/10155625
#SPJ4
change the grid lines to dashed with gridline every 64 pixels and 1 subdivision. show the grid if it is not already showing.
A custom method to convert gridlines to dotted with gridlines every 64 pixels and 1 subdivision. Go to Display, Show >, then activate the Grid to display the Grid if it isn't already.
Gridlines are visual guides that help align and organize content in layout and design software, such as graphic design software, web page design software, and presentation software. They are typically represented as a series of thin, intersecting lines that form a grid pattern, and can be customized in terms of appearance (eg color, style, spacing), visibility, and alignment. The purpose of gridlines is to provide visual structure to a design, to make it easier to align and position elements, and to ensure that the design is consistent and balanced.
The complete question is shown below.
How to change the grid lines to dashed with gridline every 64 pixels and 1 subdivision show the grid if it is not already showing?
You can learn more about gridlines here brainly.com/question/2773987
#SPJ4
what is the average length of a side in the shape made from the file datatest4.txt whose contents are shown below (truncate your answer to two decimal places)?
The correct answer is In the shape created from the contents of the file datatest4.txt given below, what is the average length of a side Shorten your response to two decimal places.
The majority of desktop PCs have a three-year minimum lifetime. However, the bulk of computers only endure five to eight years on average, depending on the updating components. Maintenance is particularly crucial due to the damaging impact the sand can have on Computer parts.Although every circumstance is unique, the typical desktop PC should last between three and eight years. Due to the more room inside the box, desktops typically run longer than laptops. How much screen time is considered healthy for adults? According to experts, adults should limit their interactive screen use far outside work to those under two hours. Any extra time should be used for exercise rather than passively watching screens.
To learn more about average length click on the link below:
brainly.com/question/24406316
#SPJ4
how to fix fallout 76 disconnected due to having modified game files ?
Once the game has been completely updated, restart it after checking for platform updates.
What are the fundamental files in a computer?Applications files, file systems, and system files are the three different sorts of files found on computers. The icons that appear for files in a Graphical interface (user interface), such as Windows Vista, are related to the software that opens the file.
What does a computer's file tool do?File management tools are devices used to organise files on a personal computer. Since all data is saved in files, files play a crucial role in the system. As a result, this utility software aids in browsing, searching, organising, discovering information, and swiftly previewing system files.
To know more about files visit:
https://brainly.com/question/29230375
#SPJ4
________ computers are present in such diverse applications as gasoline pumps, home appliances, and traffic lights.A) EmbeddedB) DistributedC) GridD) Convertible
Embedded computers are used in a variety of applications, including traffic signals, home appliances, and petrol pumps.
What does embedded computer mean?A software and hardware combination created for a particular purpose is an embedded system. Furthermore, embedded systems may function as a component of a larger system. The systems might be programmable or might just carry out a limited set of tasks.
What functions do embedded computers perform?Applications for embedded computers include unmanned military and defence, intelligent transportation, diagnostic devices, digital signage, and the industry automation and control, to mention a few. A embed computer can be used in many different applications.
To know more about Embedded computers visit:
https://brainly.com/question/17317566
#SPJ4
the msp430x family (x stands for extended) can handle a larger amount of memory since it has a 20-bit wide address bus. this family of processors is built based on a von neumann architecture and is byte-addressed as well. what is the maximum number of bytes that can be addressed? enter a decimal value.
The maximum number of bytes that can be addressed 048,576 bytes
What is the maximum number of bytes that can be addressed?The msp430x family of processors has a 20-bit wide address bus.Since the architecture is byte-addressed, each address points to a single byte.The maximum number of bytes that can be addressed is equal to 2^20 (2 to the power of 20), or 1,048,576 bytes.What is the highest byte size?
The highest byte size is 8,589,934,592 (8 GB). A byte is a unit of digital information that most commonly consists of eight bits. Bytes are used to measure the size of a file or other data. In computing, a byte is the basic unit of storage and is typically used to measure file sizes. The number of bytes in a file can be determined by looking at the file size in bytes, which is usually displayed in the file properties.
Bytes can also be used to measure the amount of memory a computer has. The higher the number of bytes, the more memory a computer has. The current highest byte size is 8 GB, which means 8,589,934,592 bytes. This means that a computer with 8 GB of memory would be able to store 8,589,934,592 bytes of data.
Bytes can also be used to measure the transfer rate of data. The higher the number of bytes, the faster the data can be transferred. For example, a computer with a transfer rate of 8 GB/s would be able to transfer 8,589,934,592 bytes of data every second.
In conclusion, the highest byte size is 8 GB, which is equivalent to 8,589,934,592 bytes. This means that a computer
To learn more about maximum number of bytes refer :
brainly.com/question/30510707
#SPJ4
you issue a transmission from your workstation to the following socket on your lan: 10.1.1.145:53. assuming your network uses standard port designations, what application layer protocol are you using? group of answer choices a http b dns c tcp d ip e hdcp
Transmission Control Protocol (TCP) is a trendy that defines how to establish and hold a community dialog via which purposes can exchange data. TCP works with the Internet Protocol (IP), which defines how computer systems ship packets of data to every other.
Which port ought to he use in such a scenario so that the required encryption can be provided?HTTPS is invulnerable and is on port 443, whilst HTTP is unsecured and accessible on port 80 Information that travels on the port 443 is encrypted using Secure Sockets Layer (SSL) or its new version, Transport Layer Security (TLS) and therefore safer.
What are the 5 layers in the Internet Protocol stack?The TCP/IP mannequin is primarily based on a five-layer model for networking. From backside (the link) to pinnacle (the person application), these are the physical, facts link, net- work, transport, and software layers.
Learn more about issue a transmission here;
https://brainly.com/question/16950965
#SPJ4
true/false: when a c expression is evaluated, binary operations are performed before unary operations.
False. In C, unary operations are performed before binary operations unless parentheses are used to indicate otherwise.
In C, the order of operations follows the rules of operator precedence and associativity. Operator precedence determines the order in which operations are performed without parentheses. Unary operations (such as unary plus, negation, and dereference) generally have higher precedence than binary operations (such as addition, subtraction, and multiplication).
For example, in the expression -5 + 3, the negation operator (-) will be applied to 5 before the addition operator (+) is applied to the result and 3. The expression will be evaluated as (-5) + 3, yielding -2.
However, if the expression -(5 + 3) was intended, parentheses can be used to change the order of operations: -(5 + 3) will be evaluated as -8.
In short, while unary operations generally have higher precedence than binary operations, using parentheses allows you to specify the order of operations in an expression.
Learn more about unary operations here: https://brainly.com/question/13814474
#SPJ4