Answer:
Explanation:
The reaction you provided is a balanced chemical equation, meaning that for every mole of LiNO3 produced, an equal amount of PbSO4 is produced. However, since you only know the amount of LiNO3 produced (5.5 grams), you can use stoichiometry to find the amount of PbSO4 produced.
First, you need to convert the amount of LiNO3 to moles:
5.5 g LiNO3 / 6.939 g/mol = 0.796 mol LiNO3
Next, using the stoichiometry of the reaction, you can find the number of moles of PbSO4 produced:
0.796 mol LiNO3 * (1 mole PbSO4 / 2 moles LiNO3) = 0.398 moles PbSO4
Finally, you can convert the number of moles of PbSO4 to grams:
0.398 moles PbSO4 * 247.77 g/mol = 98.42 g PbSO4
So, if 5.5 grams of LiNO3 were produced, then 98.42 grams of PbSO4 would be produced.
water is a liquid at room temperature. this is due to?
Answer:
Explanation:
Water is a liquid at room temperature due to its relatively low vapor pressure and high thermal stability.
Water molecules have a combination of hydrogen bonds and dipole-dipole interactions, which result in a moderate level of intermolecular attractive forces. These attractive forces allow water to remain in a liquid state at room temperature, as the energy required to overcome these forces and convert water into a gas (vaporization) is relatively high.
Additionally, water has a high heat capacity, which means that it can absorb a lot of heat energy without undergoing significant temperature changes. This high heat capacity allows water to maintain a stable liquid state over a wide range of temperatures.
Overall, the combination of moderate intermolecular forces and high thermal stability is what makes water a liquid at room temperature.
true or false. a homogeneous catalyst can be in a different phase as the rest of the reaction as long as it is evenly distributed throughout the reaction mixture. true or false. a homogeneous catalyst can be in a different phase as the rest of the reaction as long as it is evenly distributed throughout the reaction mixture. true false
True , A catalyst is a substance that quickens a chemical reaction; therefore, in homogeneous catalysis, the catalyst and reactants are in the same phase. Most of the time, everything will exist as a gas or be contained within a single liquid phase.
Are there distinct phases for reactants and homogenous catalysts?The difference between heterogeneous and homogeneous catalysts is that the former are in the same phase as the latter are not.
Is there a single phase in a homogenous system?A single phase is what is meant by the notion of a pure substance or homogenous mixture. There are two or more phases in a heterogeneous mixture. Water and oil do not mix uniformly when combined; instead, two distinct layers are created.
To know more about homogeneous catalysis visit :-
https://brainly.com/question/20215227
#SPJ4
how many total moles of ions are released when of dissolves completely in water? round your answer to significant figures.
when one mole of a substance is dissolved in water, 2 moles of ions are produced and the answer is 2 moles.
When one mole of a substance dissolves completely in water, it releases two moles of ions. This is known as the law of conservation of mass. Therefore, According to the law of conservation of mass, when a substance is dissolved in water, the total number of moles of ions produced will always equal the number of moles of the original substance. This is because the number of atoms in the final solution must be the same as the number of atoms in the original substance. Therefore, when one mole of a substance dissolves in water, two moles of ions are produced. This is because each mole of the original substance consists of two moles of atoms, and once it dissolves, each mole of atoms will become two moles of ions. Thus, when one mole of a substance is dissolved in water the number of moles of ions released is two.
Learn more about mole here:
https://brainly.com/question/20486415
#SPJ4
PLEASEEE HELPPPPPPPPPPPPPPP
_____ involves keeping the item for a short amount of time before moving it elsewhere.(1 point)
Responses
Loading
Loading
Unloading
Unloading
Receiving
Receiving
Holding
Answer:
Holding
Explanation:
because it's making a sense
proteins with more than one polypeptide chain are said to have a ______ structure.
When a protein molecule is generated as a complex of many polypeptide chains, the entire structure is referred to as the quaternary structure. The overall three-dimensional organization of a polypeptide chain.
What does a polypeptide chain look like?A polypeptide chain's structure is a linear arrangement of amino acids. Peptide bonds hold each amino acid to the one before it. In cells, there are 20 different kinds of amino acids. The core carbon of each amino acid is joined to an amino group, a carboxyl group, and a variable called the R group.
What protein possesses a tertiary structure?Proteins are frequently classified as globular or fibrous forms based on their tertiary structure. Fibrous proteins feature long, rope-like structures that are robust and hydrophobic, like -keratin. Immunoglobulins and plasma proteins are more hydrophilic and spherical than globular proteins.
to know more about polypeptide chains here:
brainly.com/question/6426934
#SPJ4
multiple choice question in a bronsted-lowry acid-base reaction, equilibrium will favor the if the reacting acid and base are strong. the reaction will always favor the formation of the acid and base. multiple choice question. reactants; weaker reactants; stronger products; weaker products; stronger
The equilibrium of a Bronsted-Lowry acid-base reaction will favor the formation of the stronger acid and base if both the reacting acid and base are strong.
The correct answer is E) Stronger.This means that the ratio of the concentrations of the products to reactants will be higher, and the reaction will be shifted toward the side containing the stronger acid and base.
The Bronsted-Lowry definition of acids and bases is one of the most commonly used in chemistry. According to this definition, an acid is a substance that can donate a proton (H+) to another substance, while a base is a substance that can accept a proton. The reaction between an acid and a base is called a neutralization reaction and results in the formation of a salt and water.
Learn more about acid-base reaction:
https://brainly.com/question/15334816
#SPJ4
In a Bronsted-Lowry acid-base reaction [1], equilibrium will favor the formation of the stronger acid and base if the reacting acid and base are both strong. Multiple Choice:
A) Reactants
B) Weaker Reactants
C) Stronger Products
D) Weaker Products
E) Stronger
Indicate whether the statements describe a saturated fatty acid or an unsaturated fatty acid.
• Solid at room temperature
• Liquid at room temperature
• Found primarily in plants and plant products
• Oil
• Comes primarily from animals and animal products
• No double bonds within carbon backbone
• Trans fats are a synthetic form that has a higher melting point
• Double bonds within carbon backbone
Options 1, 5, 6, 7, and 8 are saturated fatty acids, options 2, 3, and 4 are unsaturated fatty acids. Depending on the type of oil used, Option 4 is both saturated and unsaturated fatty acids.
What makes saturated fatty acids apart from unsaturated ones?The presence of the double bonds with in fatty acid chain is what distinguishes saturated fat from unsaturated fat. Unsaturated fats have at least one double bond with in fatty acid chain while saturated fats have no double bond between the individual carbon atoms.
• Solid at the room temperature - Saturated fatty acid
• Liquid at room temperature - Unsaturated fatty acid
• Found primarily in plants and plant products - Unsaturated fatty acid
• Oil - Can be either saturated or unsaturated, depends on the specific type of oil
• Comes primarily from animals and animal products - Saturated fatty acid
• No double bonds within carbon backbone - Saturated fatty acid
• Trans fats are a synthetic form that has a higher melting point - Saturated fatty acid
• Double bonds within carbon backbone - Unsaturated fatty acid
To know more about saturated fatty acid visit :
https://brainly.com/question/14118324
#SPJ4
which of the following is/are true? select all that apply. bonds within a molecule are broken when it goes from the solid to the liquid phase. attractive forces between molecules are broken when it goes from the solid to the liquid phase
The second statement "attractive forces between molecules are broken when it goes from the solid to the liquid phase" is true.
The process of a solid going to the liquid phase is known as melting or fusion. When a solid is heated, the thermal energy causes the particles in the solid to gain kinetic energy, and they start to vibrate more vigorously. At a certain temperature, the vibrations become so intense that the particles can overcome the attractive forces holding them in place, and they start to move freely, forming a liquid.
In this process, the bonds within a molecule remain intact. However, the attractive forces between molecules are broken as the particles start to move more freely and are no longer held in a fixed arrangement as in a solid. This increased mobility allows the molecules to flow more easily and take the shape of the container they are in, which is one of the defining characteristics of a liquid.
To know more about molecule please refer:
https://brainly.com/question/1446104
#SPJ4
The complete question is:
Which of the following is/are true? Select all that apply.
bonds within a molecule are broken when it goes from the solid to the liquid phase. attractive forces between molecules are broken when it goes from the solid to the liquid phasewhich of the following conclusions were found in the experiment? select all that apply. check all that apply the liquid form of water is less dense than the solid form. the liquid form of water is less dense than the solid form. the solid form of oil is denser than the liquid form. the solid form of oil is denser than the liquid form. water exhibits the highest amount of adhesion. water exhibits the highest amount of adhesion. alcohol has a high heat capacity. alcohol has a high heat capacity. alcohol is not very cohesive. alcohol is not very cohesive.
The right options are b, c and e. a) The solid form of oil is denser than the liquid form. b) Water exhibits the highest amount of adhesion. e)Alcohol is not very cohesive.
The solid form of oil is denser than the liquid form:
Oil is denser in its solid state than it is in its liquid state.
The strongest adhesion is found in water.
A substance's density is a measurement of how heavy it is in relation to its size. API measures oil density, which can be estimated using formulas that take oil density into account. The more thick or heavier the oil, the lower the API.
Viscous heavy oil is available with more additives and a somewhat different chemical make-up. Therefore, liquid oil may have a different density than solid oil, but it will still be lighter.
Water exhibits the highest amount of adhesion:
Important water qualities like adhesion and cohesion have an impact on how water behaves everywhere, from plant leaves to your own body.
Alcohol is not very cohesive:
Alcohol is not a particularly strong unifier. The scientists have looked at a variety of alcohol and water mixes. They demonstrate that the specific heat of these mixes is greater than the specific heat of water itself, up to an alcohol strength of roughly 36%.
Learn more about Cohesion here:
https://brainly.com/question/1466787
#SPJ4
Full question:
which of the following conclusions were found in the experiment? select all that apply. check all that apply.
a) The liquid form of water is less dense than the solid form.
b) The solid form of oil is denser than the liquid form.
c) Water exhibits the highest amount of adhesion.
d) Alcohol has a high heat capacity.
e) Alcohol is not very cohesive.
a 20.0 ml solution of naoh is neutralized with 30.5 ml of 0.200 m hbr. what is the concentration of the original naoh solution?
The concentration of the original sodium hydroxide solution was 0.0305M.
Neutralization Reaction-
A neutralization reaction is a chemical reaction between an acid and a base that results in the formation of a salt and water. In a neutralization reaction, the hydrogen ions (H+) from the acid react with the hydroxide ions (OH-) from the base to form water:
Acid + Base → Salt + Water
Calculation-
We can use the concept of stoichiometry to determine the concentration of the original sodium hydroxide (NaOH) solution.
First, we'll write the balanced chemical equation for the reaction between sodium hydroxide and hydrogen bromide:
NaOH + HBr → NaBr + H2O
Next, we'll convert the volume of hydrogen bromide to moles using the concentration and Avogadro's law:
30.5 mL * (0.200 mol/L) / 1000 mL/L = 0.00610 mol
Next, we'll use the mole ratio from the balanced chemical equation to determine the number of moles of sodium hydroxide that reacted:
0.00610 mol HBr / 1 mol NaOH = 0.00610 mol NaOH
Finally, we'll convert the number of moles of sodium hydroxide to concentration, using the volume of the original solution:
0.00610 mol / 20.0 mL * (1000 mL/L) / 1000 mL = 0.0305 M
So, the concentration of the original sodium hydroxide solution was 0.0305 M.
To know more about neutralization reaction, checkout
https://brainly.com/question/15255706
#SPJ4
a generic element, a, is composed of two isotopes, 208a and 204a. 208a has a natural abundance of 55% and an isotopic mass of 207.98 amu, and 204a has a natural abundance of 45% and an isotopic mass of 203.97 amu. what is the average atomic mass of this element?
The average atomic mass of elements 208A and 204A is 206.17 g/mol.
The average atomic mass shows the relationship between the mass and the number of atoms in a common sample of an element.
Isotope 208A
Abundance = 55%Mass = 207.98Isotope 204A
Abundance = 45%Mass = 203.97 amuFormula:
Average atomic mass = (Mass x Abundance)₁ + (Mass x Abundance)₂/100
Average atomic mass = (207.98 x 55) + (203.97 x 45)/100
Average atomic mass = 11438.9 + 9178.65/100
Average atomic mass = 206.17
So, the answer is 206.17 g/mol
Learn more about average atomic mass at https://brainly.com/question/3187640
#SPJ4
you compile a model to test how dissolved carbon dioxide levels are affecting calcium deposition in the pacific ocean as a result of climate change. your model indicates that many species relying on carbonate for shell deposition will not be able to survive due to the projected future changes in dissolved carbon dioxide levels as a result of climate change. what is the likely conclusion to draw from this result?
Your model is a prediction and should be applied cautiously to help land managers and other researchers.
What are the roles of a land manager?A land manager oversees the use, preservation, and development of ranges of land. As a land manager, your duties include ensuring land use is compliant with regulations, making suggestions for sustainable use, and researching the impact of development. The study of land management is called Sustainable land management and it refers to practices and technologies that aim to integrate the management of land, water, and other environmental resources to meet human needs.
While ensuring long-term sustainability, ecosystem services, biodiversity, and livelihoods.
Learn more about land, here:
https://brainly.com/question/428514
#SPJ1
during a recrystallization, if more solvent than necessary was used, how would the recovery be affected?
If more solvent than necessary is used during a recrystallization, the recovery of the desired product will be lower. This is because more of the product will be dissolved in the extra solvent, resulting in lower yields.
Additionally, the presence of the extra solvent could also lead to contamination of the product, further reducing the amount of the desired product recovered.
Furthermore, the extra solvent could affect the solubility of the desired product, resulting in an incomplete recrystallization and a lower recovery rate of the desired product.
Learn more about recrystallization:
https://brainly.com/question/16835395
#SPJ4
Please help me i really need help hurry quick
Evaporation removes a larger amount of salt then freezing does.
Does evaporation remove saltiness from a water body?Evaporation can remove saltiness from a water body. When water evaporates, the water molecules with a lower concentration of salt are more likely to escape into the atmosphere, leaving behind the water molecules with a higher concentration of salt. Over time, this process can result in a higher concentration of salt in the remaining water, making it saltier.
This is the basic principle behind the process of solar evaporation, which is used to obtain salt from saltwater. The saltwater is placed in large, shallow ponds and allowed to evaporate, leaving behind the salt crystals that are then harvested.
Learn more about evaporation:https://brainly.com/question/5019199
#SPJ1
4. the formula mass of propionic acid is 74.08 g/mol and its density is 0.9880 g/ml. what is the volume of 0.250 moles of propionic acid?
the volume of 0.250 moles of propionic acid is 0.257 mL.
The density of a substance is a measure of its mass per unit volume, and it is usually expressed in units of grams per milliliter (g/mL). To find the volume of a substance, we can divide its mass by its density. In this case, we have the formula mass of propionic acid, which is 74.08 g/mol, and its density, which is 0.9880 g/mL.
To find the volume of 0.250 moles of propionic acid, we first need to find its mass. We can do this by multiplying the number of moles (0.250) by the formula mass (74.08 g/mol):
0.250 moles × 74.08 g/mol = 18.52 g
Once we have the mass, we can then find the volume by dividing the mass by the density:
18.52 g / 0.9880 g/mL = 18.52 g / 0.9880 mL = 0.257 mL
Therefore, the volume of 0.250 moles of propionic acid is 0.257 mL.
To learn more about propionic acid visit: https://brainly.com/question/15241093
#SPJ4
calculate the vapor pressure (in torr) at 298 k in a solution prepared by dissolving 15.2 g of the non-volatile non-electrolye urea {co(nh2)2} in 196 g of methanol. the vapor pressure of methanol at 298 k is 122.7 torr.
The vapor pressure at 298 K for this solution is 117.80 Torr.
By the formula of Raoult's law:
P pure sv° - P sl = P pure sv° . X (molar fraction)
ΔP = P pure sv° . X (molar fraction)
122.7 Torr - P sl = 122.7 Torr . X
Molar mass urea CO(NH₂)₂ = 60.06 g/m
Molar mass methanol = 32.04 g/m
Moles for urea: 15.2 g / 60.06 g/m = 0.253 moles
Moles for methanol: 196 g / 32.04 g/m = 6.117 moles
X (molar fraction) = moles from solute / moles from solute + moles from solvent
X (molar fraction) = 0.253 / 0.253 + 6.117 = 0.04
122.7 Torr - P sl = 122.7 Torr . 0.04
122.7 Torr - 4.908 Torr = P sl
117.80 Torr = P sl
Learn more about vapor pressure from the link given below.
https://brainly.com/question/11864750
#SPJ4
Which toxic substance is often used to extract gold and results in harmful environmental effects? a. acid mine drainage b. carbon dioxide c. sulfur dioxide d. cyanide e. fluoride
When used to extract gold, the hazardous chemical cyanide causes damage to the environment.
Where can you find cyanide?Low concentrations of cyanides can be discovered in the environment and in goods that we frequently use and consume. Certain bacteria, fungus, and algae can generate cyanides. Additionally, cyanides can be found in things like tapioca, spinach, wood shoots, pistachios, lima beans, fruit shells, and car exhaust.
Cyanide can people eat it?The quantity of cyanide someone individual is subjected to, the exposure, and the duration of exposure all affect how severely they are poisoned by it. The greatest harmful effects of cyanide come from inhaling the gas, however cyanide can also be hazardous when ingested.
To know more about cyanide visit:
https://brainly.com/question/14880294
#SPJ4
why did you preheat the stemless funnel and filter paper with boiling water prior to filtering the impure acetanilide solution?
Preheat both the stemless funnel and the filter paper with boiling water due to the fact crystallization can go through at the funnel which then can clog the lowest and block the drift of filtrate all through filtration.
Acetanilide also can be prepared with the aid of acetylating aniline with acetic anhydride inside the presence of focused hydrochloric acid. Dissolve aniline in hydrochloric acid and add acetic anhydride, then stir properly. Pour the aggregate of sodium acetate into water.
Acetanilide, an artificial organic compound added to therapy in 1886 as a fever-reducing drug. Its effectiveness in relieving aches turned into determined soon thereafter, and it became used as an alternative to aspirin for decades in treating such commonplace complaints as headaches, menstrual cramps, and rheumatism. Acetanilide is a weak base because of the resonance systems it suggests. The compound is a beginning fabric for plenty of pharmaceutical capsules like sulfanilamide, a topical antibacterial, antifungal medicine.
To learn more about Acetanilide visit here:
brainly.com/question/14562247
#SPJ4
What is the largest beverage size at starbucks?
Answer: trenta (31 ounces).
Explanation:
what is the total pressure exerted by a mixture containing two gases if the partial pressure of one gas is 70 torr and the partial pressure of the other gas is 30 torr?
The total pressure exerted by a mixture containing two gases if the partial pressure of one gas is 70 torr and the partial pressure of the other gas is 30 torr is 100 torr.
The overall pressure is what?The sum of the partial pressures equals the total pressure.Total pressure therefore equals 70 plus 30 to equal 100 torr.As a result, a mixture of two gases exerts a total pressure of 100 torr.
How can you determine the pressure that a combination exerts?The answer to the above question is F=mg, where F seems to be the gravity gradient, m is the body's mass, and g seems to be the acceleration brought on by gravity.We are aware that P=FA, where P is a body's pressure, F is a force on the body, and A seems to be the force's area of action
To know more about partial pressure visit:
https://brainly.com/question/15121846
#SPJ4
How can snowfall be caused by air mass movement and changes?
A violent change in weather occurs as the cold air mass digs underneath the warm air mass creating thunderstorms and snowstorms in the winter.
What is weather?Weather is the state of the atmosphere, describing for example the degree to which it is hot or cold, wet or dry, calm or stormy, clear or cloudy.On Earth, most weather phenomena occur in the lowest layer of the planet's atmosphere, the troposphere,just below the stratosphere.
Weather refers to day-to-day temperature, precipitation, and other atmospheric conditions, whereas climate is the term for the averaging of atmospheric conditions over longer periods of time.When used without qualification, "weather" is generally understood to mean the weather of Earth.
Learn more about weather,here:
https://brainly.com/question/9662539
#SPJ1
the beta decay of cesium-137 has a half-life of 30.0 years. how many years must pass to reduce a 25 mg sample of cesium 137 to 8.7 mg?
Approximately 43.8 years must pass to reduce a 25 mg sample of cesium-137 to 8.7 mg.
The half-life of cesium-137 is 30.0 years, which means that after 30 years, half of the original amount of cesium-137 will have decayed into a different element.
Let's call the original amount of cesium-137 N. After one half-life, the amount remaining will be N/2. After two half-lives, the amount remaining will be N/2^2 = N/4. And so on.
In this case, we want to know how many half-lives must pass to reduce a 25 mg sample of cesium-137 to 8.7 mg. To find out, we can divide the final amount by the initial amount and take the logarithm base 2:
log2(8.7 mg / 25 mg) = x
x = log2(0.348) = -1.46
So, x half-lives have passed, where x is a negative number. To convert x to years, we multiply by the half-life:
-1.46 * 30 years/half-life = -43.8 years
this is an estimate based on the half-life, and the actual amount of cesium-137 remaining after a given amount of time may be slightly different.
Learn more about Half-life here https://brainly.com/question/21023768
#SPJ4
explain what is happening on the molecular scale when a chemical reaction occurs. explain how a balanced equation shows what is happening in a reaction
Chemical reactions contain breaking chemical bonds among reactant molecules (debris) and forming new bonds between atoms in product particles (molecules).
A balanced chemical equation occurs whilst the range of the atoms involved in the reactants facet is equal to the number of atoms in the goods aspect.
A chemical response is a manner that leads to the chemical transformation of 1 set of chemical substances to any other. Classically, chemical reactions embody modifications that handiest involve the positions of electrons inside the forming and breaking of chemical bonds among atoms, without exchange to the nuclei (no change to the factors gift), and may regularly be described with the aid of a chemical equation. Nuclear chemistry is a sub-area of chemistry that involves the chemical reactions of risky and radioactive elements where both electronic and nuclear modifications can arise.
The substance (or materials) initially worried in a chemical reaction are called reactants or reagents. Chemical reactions are commonly characterized by using a chemical trade, and they yield one or greater merchandise, which usually have residences exclusive from the reactants. Reactions often encompass a sequence of man or woman sub-steps, so-referred to as fundamental reactions, and the statistics on the correct path of movement are part of the response mechanism.
To learn more about Chemical reactions visit here:
brainly.com/question/29762834
#SPJ4
The synthesis of C3H4 + H2 to form C2H6 has an enthalpy of –136kJ/mol. Is this reaction endothermic or exothermic?
Answer: exothermic
Explanation: The key is to look at the enthalpy (-136kJ/mol). Since it’s negative, the reaction is losing heat, therefore it’s exothermic.
A material through which electrons can move easily is What
Answer:
Explanation:
A material through which electrons can move easily is referred to as a conductor. Conductors have a high electrical conductivity, which means that electrons can flow through them with relative ease. This is due to the presence of free electrons in the material, which are not tightly bound to individual atoms. Examples of common conductors include metals such as copper, aluminum, and gold.
what is the effect on the volume of one mol of an ideal gas if the pressure changes from 760 torr to 190 torr and the temperature changes from 310 k to 155 k?
If the pressure changes from 760 torr to 190 torr and the temperature changes from 310 k to 155 k, the pressure decreases and the temperature decreases, so the volume of the gas will increase.
The effect on the volume of one mole of an ideal gas if the pressure changes from 760 torr to 190 torr and the temperature changes from 310 K to 155 K can be determined using the Ideal Gas Law:
PV = nRT
Where P is pressure, V is volume, n is number of moles, R is the gas constant, and T is temperature in Kelvin.
We can rearrange the equation to solve for volume:
V = nRT / P
First, we'll find the volume at the initial conditions (P1 = 760 torr, T1 = 310 K):
V1 = nRT1 / P1 = n(0.0821 L atm/mol K)(310 K) / (760 torr)
Next, we'll find the volume at the final conditions (P2 = 190 torr, T2 = 155 K):
V2 = nRT2 / P2 = n(0.0821 L atm/mol K)(155 K) / (190 torr)
The change in volume can be found by subtracting the initial volume from the final volume:
ΔV = V2 - V1
Since the number of moles (n) and the gas constant (R) are constant, the change in volume is proportional to the change in pressure and temperature. In this case, the pressure decreases and the temperature decreases, so the volume of the gas will increase.
Learn more about Ideal Gas Law here:
https://brainly.com/question/28257995
#SPJ4
CuCh2 + 2KNO3 - Cu(NO3)2 + 2KCI
a. If 45 grams of copper (II) chloride is reacted with excess potassium nitrate what mass of copper (II) nitrate can be formed?
b. If 58 grams of copper (II) nitrate is formed when this experiment is performed in the laboratory what is the percent yield for this reaction?
The mass of copper (II) nitrate that can be formed is 62.7 grams.
If 58 grams of copper (II) nitrate is formed when this experiment is performed in the laboratory, the percent yield for this reaction is 92.5 %.
What mass of copper (II) nitrate is formed?The mass of copper (II) nitrate that is formed is determined from the mole ratio of the reaction as obtained from the equation of the reaction.
The mole ratio of copper (ii) chloride and copper (ii) nitrate is 1 : 1
The mole of copper (ii) chloride reacted = 45/134.5 moles
The mass of copper (II) nitrate that is formed = 45/134.5 * 187.5 g
The mass of copper (II) nitrate that is formed = 62.7 grams
Percent yield = 58/62.7 * 100%
Percent yield = 92.5 %
Learn more about percent yield at: https://brainly.com/question/2451706
#SPJ1
in which of the molecules below is the carbon-carbon distance the shortest? a. h2cch2 b. h-cc-h c. h3c-ch3 d. h2ccch2 e. h3c-ch2-ch3
In the molecules given, the shortest carbon-carbon (C-C) distance is typically found in molecule "b" (H-C=C-H). Option B is correct.
The shortest carbon-carbon (C-C) distance is found in H-C=C-H. This is because the double bond between the two carbon atoms in this molecule will requires the carbon atoms to be closer together than in the other molecules.
In general, double bonds give result in a shorter C-C distance as compared to single bonds. This is due to the increased electron density in the region between the two atoms in a double bond, which strengthens the bond as well as pulls the atoms closer together.
To know more about carbon-carbon here
https://brainly.com/question/4704641
#SPJ4
is the dissolution reaction of urea enthalpically favored?
No, since the biochemical system gains energy, it does not have enthalpy favored.
Is the breakdown of urea driven by entropy or by enthalpy?Urea dissolves quickly in liquid, making it a good choice for enthalpy change measurements during dissolution. Entropy is the process' driving force since it is endothermic and spontaneous.
How do you determine whether a reaction was enthalpically advantageous?If stronger bonds are created than are broken, if a stronger acid or base is generated in the result, or if more molecules are produced, processes will be thermodynamically beneficial. Other examples include when more molecules are produced.
To know more about enthalpy visit:
https://brainly.com/question/13996238
#SPJ4
One property of a wave is that it changes speed from one substance to another. What happens to the light wave when it travels from the air and through the glass?
Answer:
Explanation:
When light travels from air to glass, it slows down due to the change in the refractive index. This causes the wave to bend, a phenomenon known as refraction. The amount of bending depends on the difference in refractive indices between the two materials, and the angle of the incoming wave.