true or false: a rigid tank containing ionized gases kept under the influence of a magnetic field is a simple compressible system.

We have aqueous solutions with following boiling points, in order of lowest boiling point to highest boiling point: 0.475 m K3PO4, 0.724 m NH4NO3, 0.530 m Na2SO4, 0.900 m KBr, and 1.68 m CH3OH.

Samples of watery solutions include coke, seawater, rain, corrosive, base, and salt solutions. Any liquid that lacks water is an example of a solution that is not an aqueous solution.

Aqueous solutions are made up of water but one or more soluble materials. Solids, gases, and other liquids can all dissolve in an aqueous solution. A combination must be stable is order to be eligible a real solution.

To know more about Aqueous Solutions visit :

https://brainly.com/question/14097392

#SPJ4

Answer: 0.907, 0.520, 0.475, 0.736

Explanation:

Commonly, aldehydes consist of a carbon atom bound to one carbon but one hydrogens. Aldehydes have a strong polarity, which makes them very reactive.

Aldehydes are heterocyclic compounds that are abundant in the environment and can be found in both natural and man-made sources. The aldehydes are often hazardous to the body since they are reactive species.

Your blood absorbs some of the acetaldehyde, harming your membranes and perhaps leading to the formation of scar tissue. Additionally, it results in a hungover and that may bring on symptoms like a headache, an upset stomach, or an increased pulse. The most vulnerable organ to acetaldehyde toxicity is the brain. It disrupts brain function and may deteriorate memory.

To know more about Aldehydes visit:

https://brainly.com/question/1792281

#SPJ4

False. The quantity of carbon atoms in a molecule does not largely control its polarity.

The fundamental constituents of organic molecules, carbon atoms are also fundamental to the structure and characteristics of many chemical substances. The capacity of carbon atoms to establish potent covalent bonds with other carbon atoms as well as with other elements like hydrogen, oxygen, nitrogen, and sulphur makes them special.

Both limonene and cinnamonaldehyde are naturally occurring chemicals with unique molecular structures that affect their polarity. Limonene, a terpene with a nonpolar structure, is less polar than cinnamonaldehyde, which has a carbonyl functional group (C=O). Cinnamaldehyde may dissolve in polar solvents like water because of its polar nature, whereas limonene is more soluble in nonpolar solvents like oils. In many applications, a molecule's polarity is crucial because it influences the compound's solubility and stability.

To know more about carbon atoms, visit:

https://brainly.com/question/949218

#SPJ4

Answer:

so it’s A

Explanation:

it’s a

The concentration of the H2S04 is 0.2325M

Volume of ,[tex]H2S04,V1=25.0mL[/tex]

The volume of NaOH, [tex]V2=33.7mL[/tex]

Molarity of NaOH, [tex]M2=0.345m[/tex]

To find: Molarity of [tex]H2SO4,(M1)[/tex]

Formula Used: [tex]n1V1M1=n2V2M2[/tex] where  [tex]n1[/tex] and [tex]n2[/tex] are the number of proton/ hydroxides transferred during the reaction

Solution:

[tex]n1=2[/tex](since each molecule may release two protons)

[tex]n2=1[/tex] (since each NaOH molecule may produce one hydroxide ion)

By changing the variables in the formula, we arrive at

[tex]n1V1M1=n2V2M2\\2*25.0*M1=1*33.7*0.345\\\\M1=\frac{1*33.7*0.345}{2*25.0}\\\\M1=\frac{11.6265}{50}\\\\M1=0.23253M\\[/tex]

There fore,The concentration of the H2S04 is 0.2325M

Oil of vitriol, also known as sulfuric acid (American spelling, preferred IUPAC name), or sulphuric acid (Commonwealth spelling), is a mineral acid made up of the elements hydrogen, oxygen, and sulphur, and has the chemical formula H2SO4. It is a viscous liquid that is miscible with water. It has no colour or smell.

learn more about H2SO4 Refer:brainly.com/question/12004196

#SPJ4

The density of iron is 7.8g/cm^3

The formula for density=Mass/Volume

Mass=8.5g

Volume=25.38-24.30=1.08ml

Since 1ml=1 cm^3

New Volume =1.08cm^3

Using density=Mass/Volume

                     =8.5/1.08=7.8g/cm^3

How is density determined?

The ratio of an object's mass to its volume is its density. Grams per cubic centimeter, or g/cm3, are frequently used to measure density. Keep in mind that a volume is measured in cubic centimeters, not grams (the same volume as 1 milliliter).

Learn more about Density:

brainly.com/question/406690

#SPJ4

A certain fluid has poured on the engine, causing the vehicle to smoke under the hood without overheating.

fluids are any liquids, gases, or basically any materials that, when under stress, exhibit a continual change in shape and are unable to withstand tangential or shearing forces at rest.

Thermostat, density, and composition are a few of the most basic ideas in fluid characteristics. Extensive properties, or properties which are dependent on the quantity of material present, include mass and volume.Temperature, pressure, and density are some examples of intense properties.

To know more about fluid visit :

https://brainly.com/question/28392780

#SPJ4

Propionic acid has a mass percent of oxygen of approximately 53.18%.

The ratio of the mass of the solute contained in a solution to the mass of the solution as a whole is known as the mass percent.

Propionic acid has a molecular formula [tex]C_{3}H_{6}O_{2}[/tex]. To calculate the mass percent of oxygen in propionic acid, multiply the mass of oxygen in one mole of propionic acid by the total mass of one mole of propionic acid and multiply by 100.

Propionic acid weighs 60.1 g per mole. Propionic acid's oxygen atoms have a total mass of 2 x 16.0 g = 32.0 g.

As a result, the oxygen mass percent in propionic acid is:

[tex]\frac{32}{60.1}[/tex] × 100 = 53.18%

To Learn More About oxygen click

brainly.com/question/13370320

#SPJ4

After 244 ml of soda is removed, there is 325 ml - 244 ml = 81 ml left in the can. This answer should be reported with the correct number of significant figures and proper units, which in this case would be 81 ml (3 significant figures).

When calculating the remaining amount of a substance after a portion has been removed, it is important to consider both the accuracy and units of the measurements involved. In this case, a can contains 325 ml of soda and 244 ml of soda has been removed. To find the remaining amount, we subtract the amount removed from the original amount: 325 ml - 244 ml = 81 ml. The answer should be reported with the correct number of significant figures, which reflects the level of accuracy of the measurements, and proper units, which in this case would be 81 ml (3 significant figures). It is important to use the correct number of significant figures and proper units when reporting the results of any calculation, as this helps to ensure the accuracy and consistency of the results, and makes it easier for others to understand and interpret the results.

Learn more about subtraction here: brainly.com/question/2346316

#SPJ4

The molarity of the K2CO3 aqueous solution is 0.080 M. This value can be calculated using the formula:

                                   Molarity = moles/volume

To determine the molarity of a K2CO3 aqueous solution, we'll need to calculate the number of moles of K2CO3 present in the solution, and then divide by the volume of the solution.

First, let's convert the concentration from percent by mass to grams:

12.0% by mass K2CO3 x (1 g / 100 g) = 0.12 g K2CO3

Next, we'll use the density of the solution to find its volume:

V = m / ρ = 0.12 g / (1.108 g/cm^3) = 0.108 cm^3

Next, we'll convert the volume to liters:

V = 0.108 cm^3 x (1 L / 1000 cm^3) = 0.000108 L

Now, we can calculate the number of moles of K2CO3 in the solution:

n = m / M = 0.12 g / (138.2 g/mol) = 0.000868 mol

Finally, we can calculate the molarity of the solution:

M = n / V = 0.000868 mol / 0.000108 L = 0.080 M (3 significant figures)

So the molarity of the K2CO3 aqueous solution is 0.080 M.

Molarity is an important concept in chemistry because it allows us to quantify the amount of a substance in a solution and to compare the concentration of different solutions. For example, molarity can be used to compare the concentration of different solutions of the same solute, to determine the amount of solute needed for a reaction, or to calculate the amount of solute that has been consumed or produced in a reaction.

Learn more about molarity here:

https://brainly.com/question/8732513

#SPJ4

Answer

Explanation: The word BOOK; is made up of 4 letters and each actually represents the symbol of an element. An element ...

Explanation:

The method used to mix the analyte solution during the titration based on the experimental procedure is a glass stirring rod.

Analyte or titrate is a solution whose concentration is unknown. Titrant is a standard solution whose concentration is known. Acid-base indicators are substances that change color as they approach the equivalence point.

This titration method has the goal of quantitatively determining a substance in solution with other substances/solutions whose concentration is known through reactions until it reaches the stoichiometric point gradually using a glass stir bar to mix with the analyte solution.

Learn more about equivalence observed in the analyte solution here :

https://brainly.com/question/15170788

#SPJ4

The ion described by 38 protons, 38 neutrons, and 36 electrons is likely to be a calcium ion, Ca2+. Calcium has an atomic number of 20, meaning it has 20 protons, and therefore 20 electrons in a neutral atom.

If it has gained two electrons, it will have 22 electrons, and a charge of 2-, which matches the description of a Ca2+ ion.

Calcium is an important element in the human body and the environment. It is essential for strong bones and teeth, healthy blood clotting, and nerve function.

Calcium is also involved in many other biological processes, such as muscle contraction and the regulation of heart rate. In the environment, calcium is found in rocks, such as limestone and marble, and is an important component of soil.

Calcium compounds are used in a variety of industrial applications, such as the production of cement, glass, and paper.

To know more about Electron:

https://brainly.com/question/1255220

#SPJ4

d. water is a polar molecule that's why it can dissolve ionic compounds.

The polarity of water refers to its molecular structure, where the oxygen atom has a partial negative charge and the hydrogen atoms have partial positive charges. This makes water a polar molecule, meaning that it has a positive and negative end. Due to its polarity, water is able to dissolve ionic and polar substances, making it an excellent solvent. This property of water is important in many biological and chemical processes.

Learn more about polar substance here:

https://brainly.com/question/11405437

#SPJ4

Absolute pressure when a pressure gauge reads 50 psi where barometric pressure is 29.1 in Hg is 130.67 in Hg or 64.18 psi

The absolute pressure in the tank can be determined by adding the gauge pressure (50 psi) to the barometric pressure ( athmospheric pressure ) (29.1 in Hg) converted to psi. To convert from in Hg to psi, we can use the conversion factor 1 psi = 2.036 in Hg.

So, the atmospheric pressure in psi is: 29.1 in Hg x (1 psi / 2.036 in Hg) = 14.18 psi

And the absolute pressure in the tank is: 50 psi + 14.18 psi = 64.18 psi

If we want to use unit of in Hg then 64.18 psi = 64.18 x 2.036 = 130.67 in Hg

Thus, the absolute pressure in the tank is 64.18 psi or 130.67 in Hg

Learn more about absolute pressure here

https://brainly.com/question/13134187

#SPJ4

The density of vanadium having atomic radius 134 pm which crystallizes with a body-centered cubic unit cell is 6.10 g/cm^3.

The density of a material can be calculated using its atomic weight and crystal structure. For a body-centered cubic (BCC) crystal structure, the formula for density is given by:

=> Density = Atomic weight / (Atomic volume x N Avogadro)

Where the atomic volume is given by:

=> Atomic volume = (Atomic radius)^3 x (4/3) x π

And N Avogadro is Avogadro's number (6.022 x 10^23 atoms/mol).

For vanadium, with an atomic radius of 134 pm, the atomic volume can be calculated as follows:

=> Atomic volume

= (134 pm)^3 x (4/3) x π

= (0.134 nm)^3 x (4/3) x π

= 3.66 x 10^-23 m^3/atom

The atomic weight of vanadium is approximately 50.94 g/mol. Plugging in these values into the formula for density gives:

=> Density

= 50.94 g/mol / (3.66 x 10^-23 m^3/atom x 6.022 x 10^23 atoms/mol)

= 6.10 g/cm^3

So the density of vanadium is approximately 6.10 g/cm^3.

To know more about body centered cubic unit cell please refer:

https://brainly.com/question/13996938

#SPJ4

Answer:

Explanation:

5.71

Answer:

wind

Explanation:

Winds drive currents that are at or near the ocean's surface. Near coastal areas winds tend to drive currents on a localized scale and can result in phenomena like coastal upwelling.

In a Lewis structure that contains a polar covalent bond, the atom with the highest electronegativity will have the partial negative charge, indicated by a delta symbol (-).

Lewis structure, also called electron-dot structure, is a structural formula in which electrons are represented by dots; two dots between two atoms represent a covalent bond.

The polarity of the bond is determined by the difference in electronegativity between the two bonded atoms, with the more electronegative atom having a stronger affinity for electrons and taking on a partial negative charge.

For example, in a bond between chlorine (Cl) and hydrogen (H), nitrogen is more electronegative than hydrogen and will have a partial negative charge. This would be represented in the Lewis structure as Cl (-) - H (+).

Learn more about covalent bond:

https://brainly.com/question/30480258

#SPJ4

By the equation for heat transfer, we can  find the initial temperature of the gold.

Q = mcΔT

where Q is the heat transferred, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

We need to first calculate the heat transferred from the water to the gold:

Q = (22.1 g) * (4.184 J/g°C) * (27.5°C - 25.0°C)

Then, we can use the equation for heat transfer to find the heat absorbed by the gold:

Q = (182 g) * c * ΔT

We can equate the two expressions for heat transfer and solve for ΔT:

(22.1 g) * (4.184 J/g°C) * (27.5°C - 25.0°C) = (182 g) * c * ΔT

ΔT = [ (22.1 g) * (4.184 J/g°C) * (27.5°C - 25.0°C) ] / (182 g) * c

The specific heat capacity of metals= 0.129 J/g°C:

ΔT = [ (22.1 g) * (4.184 J/g°C) * (27.5°C - 25.0°C) ] / (182 g) * (0.129 J/g°C)

ΔT = 11.36°C

Then, the initial temperature of the gold can be found by subtracting ΔT from the final temperature:

Initial temperature = 27.5°C - 11.36°C = 16.14°C

The initial temperature of the gold was approximately 16.14°C.

To know more about heat transferred referred to-

brainly.com/question/13433948#

#SPJ4

3. The concentration of the solution, 4. The date of preparation and 5. The name of the person who prepared the solution. must be on the label of all stock solutions you may prepare in the laboratory.

All laboratory-prepared stock solutions must have the following information on their labels:

- The name of the solution 

- The name of the solution 

- An expiration date

- Any unique storage demands

- The proper hazard labels, such as "toxic," "corrosive," "flammable,"

concentration of the solution etc.

Solutions include: 1. Buffering techniques; Salt remedies; Sugar alternatives; Acid remedies; Basic answers; combinations of solvent ;Products with metal ions; Protein remedies;DNA remedies; enzymatic remedies

learn more about solvent Refer:brainly.com/question/14797683

#SPJ4

Because of molecules in both liquids and solids are already so near to one another, they are repeatedly alluded to as condensed phases.

A liquid seems to be a nonlinear material fluid with a (almost) constant volume regardless of pressure that adapts to the structure of its container. Since it has a set dimension but no stationary phase ( a solid, it is among the four primary states of nature (some others being solidity, gas, as well as plasma).

Chardonnay (excluding balsamic vinegar), honey pollen, sunflower oil, cream (including whey), dew, human blood, and rain are the 7 liquids involved in this situation. Normally, blood is not something that is eaten, but in some cases, it has been used to treat illnesses.

To know more about liquids visit:

https://brainly.com/question/4008248

#SPJ4

Answer:carbon

Explanation:

Proteins separated on 2-D gels by mass in the spatial level and by charge (isoelectric level, pI) in the first phase in 2-D gel electrophoresis.

We can determine how many distinct Nucleic acids are contained in a sample and how big they are in relation to one another using electrophoresis. A standard "yardstick" comprised of Plasmid dna of known sizes may be used to assess the size of a dna fragment to estimate its absolute size.

The following list of fundamental processes for performing gel electrophoresis includes: Pouring the gel, getting ready your samples, loading the gel, running the gel (trying to expose it to an electric current), and running the gel

To know more about electrophoresis visit:

https://brainly.com/question/28709201

#SPJ4

The entropy change for the vaporization of one mole of ammonia at 240 K is approximately 128 J/K.

The entropy change for a phase change can be calculated using the heat of vaporization (ΔH) and the normal boiling point (T) of the substance.

The entropy change (ΔS) is given by the equation:

ΔS = ΔH / T

For the vaporization of one mole of ammonia (NH3), the heat of vaporization (ΔH) can be obtained from tables of thermodynamic data.

The normal boiling point of ammonia is 240 K.

Plugging in these values, the entropy change for the vaporization of one mole of ammonia at 240 K can be calculated as:

ΔS = ΔH / T = 128 J/K

Learn more about entropy here:

https://brainly.com/question/13135498

#SPJ4

n = ΔH / (-R * T) = -15,000 J / (-8.31 J/mol*K * 298 K) = 0.102 moles. To find the amount of O₂ required in the reaction, the energy change (ΔH) for the reaction must be determined.

The reaction can be assumed to be exothermic because the products have a higher energy than the reactants.

ΔH = -15,000 J

Using the balanced equation for the reaction, the moles of C₆H₆ can be calculated using the given ΔH value:

ΔH = -n * R * T

Where n is the number of moles of O₂, R is the gas constant (8.31 J/mol*K), and T is the temperature in Kelvin (298 K).

Solving for n:

n = ΔH / (-R * T) = -15,000 J / (-8.31 J/mol*K * 298 K) = 0.102 moles.

Learn more about ions here: brainly.com/question/26416088

#SPJ4

Complete question:

How many moles of O₂ would be required in a combustion reaction with C₆H₆ to produce +15000. J of work at 298 K?

C₆H₆(l) +15/2-02(g) → 6CO₂(g) + 3H₂O(l)

In contrast to nitrogen, which is unable to create compounds with five real covalent bonds, phosphorus has outside d orbitals that allow the octet to expand and lead to the +5 state.

The molecule's Lewis dot structure may be used to identify the many kinds of covalent bonds. Depending on whether they are shared or not, pairs of electrons for each molecule have distinct names. A bond pair is a pair of atoms that are shared by two atoms.

Hydrogen (H2), oxygen (O2), nitrogen (N2), water (H2O), and methane (CH4) are five instances of covalent bonding. 2. A chemical bond is what a covalent link is.

To know more about bonds visit:

https://brainly.com/question/28197719

#SPJ4

1.6 ml of industrial grade concentrated muriatic acid is used for cleaning masonry and cement.

what is muriatic acid?

Muriatic acid is a solution of hydrochloric acid in water, usually at a concentration of around 30%. It is used for many purposes, including cleaning masonry and metal surfaces, adjusting  levels in swimming pools, and as an ingredient in some cleaning products. It is a highly corrosive acid and should be handled with care.

Calculation of  muriatic acid solution to millilitres

Divide the concentration (30%) by 100 to get 0.3. Calculate the amount of muriatic acid needed to make a solution of 0.1%.

1 millilitre of the muriatic acid solution contains 0.3 g of the acid. To make a solution of 0.1%, multiply the amount of acid by 10. Therefore, to make a solution of 0.1%,   1o ml of the muriatic acid solution is needed.

To know more about muriatic acid, check out:

brainly.com/question/9894622

#SPJ4

The basicity of CH3CH2 is greatest, CH3NH is middle, and CH3O is lowest. Being basic is a characteristic of a base (not really an acid).

A base is a chemical that reacts with hydrogen ions to neutralize the acid. The majority of foundations are mineral compounds that combine with acids to create water and salts. The oxides, hydroxides, and trace elements of metals are examples of bases. Alkaline solutions are the solubility bases. Alkalies include sodium hydroxide.

Because it totally dissociates into salts and hydroxide ions, sodium chloride is the stronger base. Further away from the acid, such strong acids are bathed with hydrogen ions, totally ionizing the hydrogen ions.

To know more about base visit:

https://brainly.com/question/9939772

#SPJ4

A homogeneous mixture was prepared by mixing 0.50 g a, 108.9 how many hours will it take to fill a cubic vat of 14.2 ft edge length with a liquid that has a density of 1.23 g/ml and is spilling at a rate of 2.69 kg/s?g b and 30.92 g c. the volume is found to be 77.5 cm3. It will take approximately 16.5 hours to fill the cubic vat with the liquid.

The density of the mixture can be determined using the formula:

density = mass / volume

First, find the total mass of the mixture:

mass = 0.50 g + 108.9 g + 30.92 g = 140.32 g

Next, convert the volume from [tex]cm^{3}[/tex] to mL:

volume = 77.5  [tex]cm^{3}[/tex] x (1 mL/1  [tex]cm^{3}[/tex]) = 77.5 mL

Finally, calculate the density of the mixture:

density = mass / volume = 140.32 g / 77.5 mL = 1.81 g/mL

So, the density of the mixture is 1.81 g/mL.

As for the time it will take to fill the cubic vat, you can use the formula:

time = volume / (rate x conversion factor)

First, convert the volume of the vat to liters:

volume = 14.2 ft x 14.2 ft x 14.2 ft = 4355.57 [tex]ft^{3\\[/tex] = 123.3 [tex]m^{3}[/tex] = 123,300 L

Next, convert the rate from kg/s to L/s:

rate = 2.69 kg/s / (1.23 g/mL) = 2.18 L/s

Finally, calculate the time it will take to fill the vat:

time = volume / rate = 123,300 L / 2.18 L/s = 56,501.85 s = approximately 16.5 hours

So, it will take approximately 16.5 hours to fill the cubic vat with the liquid.

Here you can learn more about the density of the mixture

brainly.com/question/14134602

#SPJ4