The synthesis of C3H4 + H2 to form C2H6 has an enthalpy of –136kJ/mol. Is this reaction endothermic or exothermic?

Water is always involved in hydrolysis reactions in the given options.

The term "hydrolysis" refers to the breakage of chemical bonds by the addition of water and represents the reaction of an organic chemical with water to produce two or more new chemicals. Some occurrences of hydrolysis include the formation of hydronium and bisulfate compounds when sulphuric dissolves in water or a salt of a weak acid or base is mixed with water.

Inversion is the mechanism of hydrolyzing sucrose to produce glucose and fructose. Invert sugar is the consequence of the hydrolysis of sucrose, which causes the sign of rotation to alter from dextro (+) to laevo (-).

Learn more about hydrolysis reactions here:

brainly.com/question/16715756

#SPJ4

The molality of a solution composed of 38.0 g of cane sugar (C₁₂H₂₂O₁₁) dissolved in 175 g of water in 0.63 m.

Molality (m) of the solution is described as "the number of moles of solute per kilogram of solvent". The formula for calculating molality is given as; Molality (m) = moles of solute / kilograms of solvent.

Weight = 38 g

Molar mass = 342 g/mol

Mass of solvent = 175 g

By the formula,

Molality = (W/MW) (1000/mass of solvent in g)

Substituting the values,

Molality = (38/342) (1000/175)

⇒ Molality = 0.11 × 5.71

⇒ Molality = 0.63 m

Hence, the molality of the solution is 0.63 m.

Learn more about molality from the link given below.

https://brainly.com/question/2497128

#SPJ4

The solubility of a compound depends on the nature of the solute-solvent interactions. Water is a polar solvent that dissolves polar and ionic compounds. Polar and nonpolar organic solvents dissolve like compounds.

The solubility of a solute in a solvent is dependent on the nature of the solute-solvent interactions. A polar solvent like water is effective in dissolving polar and ionic compounds by forming hydrogen bonds with the solute and separating the ions or polar molecules in the solution. Polar organic solvents, such as ethanol, can also dissolve polar and ionic compounds by forming hydrogen bonds. Nonpolar organic solvents, like hexane or toluene, are effective in dissolving nonpolar and hydrophobic compounds by surrounding the solute molecules and breaking the van der Waals forces holding them together in the solid state. In general, the solute must have a similar polarity as the solvent in order for it to dissolve, and the solvent must have the ability to disrupt the attractive forces holding the solute together in order to dissolve it.

To know more about types of solvents, visit:https://brainly.com/question/9675267

#SPJ4

If 4.000 g of sample 1 were added to the water instead of 2.000 g, the freezing point depression of the water would increase.

Freezing point depression is a phenomenon that occurs when a solute is dissolved in a solvent, such as water. The presence of solute molecules in the solvent interferes with the formation of ice crystals, causing the solution's freezing point to decrease. The magnitude of the freezing point depression is directly proportional to the concentration of solute in the solution. This means that if the amount of solute increases, the freezing point depression will also increase. If adding 4.000 g of sample 1 instead of 2.000 g, the concentration of the solute in the water will be higher, leading to a greater depression of the freezing point. This means that the water will freeze at a lower temperature than it would if only 2.000 g of sample 1 were present.

To know more about freezing point depression, visit: https://brainly.com/question/12844810

#SPJ4

If 4.000 g of sample 1 were added to the water instead of 2.000 g, the freezing point depression of the water would increase.

Freezing point depression is a phenomenon that occurs when a solute is dissolved in a solvent, such as water. The presence of solute molecules in the solvent interferes with the formation of ice crystals, causing the solution's freezing point to decrease. The magnitude of the freezing point depression is directly proportional to the concentration of solute in the solution. This means that if the amount of solute increases, the freezing point depression will also increase. If adding 4.000 g of sample 1 instead of 2.000 g, the concentration of the solute in the water will be higher, leading to a greater depression of the freezing point. This means that the water will freeze at a lower temperature than it would if only 2.000 g of sample 1 were present.

To know more about freezing point depression, visit: brainly.com/question/12844810

#SPJ4

If the data is considered to be accurate and consistent, all four trials in each data set should be used in the average calculation.

However, if one or more of the trials are significantly different from the other trials, it may be best to exclude those trials as outliers and only use the remaining trials in the average calculation.

In data set 1, trial 3 (21.22 mL) is significantly lower than the other trials, so it could be considered an outlier and excluded from the average calculation.

In data set 2, all of the trials are relatively close in value and within a reasonable range, so all four trials can be used in the average calculation.

It is important to carefully examine the data and consider any outliers in order to determine the most appropriate approach for calculating the average volume of NaOH needed to reach the endpoint of the titration.

To know more about NaOH Titration:

https://brainly.com/question/22609288

#SPJ4

Here, when the pendulum moves the equilibrium position B to A, its potential energy converts to kinetic energy and at  A, its kinetic energy converts back to potential energy.

Kinetic energy of an object is generated by virtue of its motion. Potential energy is the energy stored on it when the object is at rest. When a body starts moving its potential energy starts converts to kinetic energy.

At B, pendulum is in equilibrium position having potential energy. When it starts oscillating to A, its potential energy converts to kinetic energy by motion and it reaches its maximum kinetic energy from the starting before reaching A.

At the point A, in its maximum height with no motion for seconds, it have its maximum potential energy. When it return back to its equilibrium position, again it gains kinetic energy until it reaches B.

Find more on potential energy:

https://brainly.com/question/24284560?

#SPJ1

The related image is attached below.

Answer:

c

Explanation:

The manganese dioxide would lower the activation energy for the decomposition of the hydrogen peroxide. Option D

A catalyst is a substance that increases the rate of a chemical reaction without being consumed in the reaction. Catalysts work by providing an alternative, lower-energy pathway for the reaction to occur, thus reducing the activation energy required for the reaction to proceed. As a result, the reaction rate is increased, and the reaction can proceed more quickly and efficiently.

The function of the manganese dioxide is that of a catalyst as it lowers the potential energy so that the reaction can take place.

Learn more about manganese peroxide:https://brainly.com/question/12753686

#SPJ1

The total masses of benzoic acid and sodium benzoate needed to make 100 ml of a benzoic acid/sodium benzoate buffer with a pH of 4.30 will be 12.21 g and 11.19 g, respectively.

To make 100 ml of a benzoic acid/sodium benzoate buffer with a pH of 4.30, we need to determine the amount of benzoic acid and sodium benzoate that needs to be added.

Let's assume that the initial concentration of benzoic acid

(Ka = [tex]6.5 \times 10^{-5}[/tex]) is C1

and the final concentration of benzoic acid (C2) and sodium benzoate (C3) is equal.

Then the [H3O+] = Ka x [tex]\frac{C_2^{2}}{C_1}[/tex]

= >[tex]6.5 \times 10^{-5}[/tex] x  [tex]\frac{C_2^{2}}{C_1}[/tex]

The buffer pH is 4.30, so the [H3O+] = [tex]10^{-4.3}[/tex]

The ratio of [HA]/[A-] = 0.78,

so [A-] = 0.78 x [HA]

[H3O+] =[tex]Ka \times \frac{ [A-]^2} {[HA]}[/tex]

=[tex]\frac { 6.5 \times 10^{-5} x 0.78^2} { [HA] }[/tex]

= [tex]\frac { 4.7 \times 10^{-4} \times [HA] } {[A-]}[/tex]

= [HA] / 0.78 [A-]

[H3O+] x [A-] / [HA]

= [tex]\frac {4.7 \times 10^{-4} \times [A-] } {0.78 [HA] }[/tex]

= [tex]10^{-4.3}[/tex]

[A-] =[tex]\frac { 10^{-4.3} \times 0.78 [HA]} {4.7 \times 10^{-4}}[/tex]

[HA] = [tex][A-] \times \frac{ 4.7 x 10^{-4} } {0.78 \times 10^{-4.3}}[/tex]

Let's assume that [HA] = C1 = 1 M (1 mole/L).

Then [A-] = 0.78 [HA]

= 0.78 M (0.78 mole/L)

The total moles of benzoic acid in 100 ml of buffer solution (n1) = C1 x V1 = 1 M x 0.100 L = 0.100 moles.

The total moles of sodium benzoate in 100 ml of buffer solution (n2) = C3 x V2 = 0.78 M x 0.100 L = 0.078 moles.

The mass of benzoic acid (m1) = n1 x molar mass of benzoic acid = 0.100 moles x 122.12 g/mol = 12.21 g

The mass of sodium benzoate (m2) = n2 x molar mass of sodium benzoate = 0.078 moles x 144.11 g/mol = 11.19 g

To learn more about Buffer :

https://brainly.com/question/28042363

#SPJ4

A soap film is thin enough to exhibit interference of light, meaning that the light waves passing through it can reinforce or cancel each other out.

When the thickness of the soap film decreases to a molecular scale, the film acts as a thin-film interferometer and the reflection across the entire visible spectrum becomes zero.

Because the light waves passing through the front and back surfaces of the film interfere destructively, leading to zero reflection. This condition is known as the "minimum reflection" and is used to accurately measure the thickness of thin films.

To learn more about molecular lengths:

https://brainly.com/question/26667070

#SPJ4

Purple colour represents the liquid with the greatest density.

The density of a liquid is a measurement of how heavy it is in relation to the quantity being measured.

If the densities are equivalent, the liquid will have a little lower density.

Graduated cylinders can be found in a range of diameters or volume capacities, just like measuring cups. To measure volume, fill the cylinder with liquid, then check the level against the graduated scale. The measured volume and the volume of liquid inside the cylinder match each other exactly. A graduated cylinder holds three liquids.

If you weigh two liquids that have identical quantities or amounts, the liquid that weighs more is denser. When gently introduced to the water's surface, a substance that is less thick than water will float.

To know more about density

https://brainly.com/question/952755

#SPJ4

14000 g (14 kg) of 20% ichthammol ointment to make 70 g of 8% ichthammol ointment.

To determine how many grams of 20% ichthammol ointment should be mixed with petrolatum to make 70 grams of 8% ichthammol ointment, you can use the following formula:

(% ichthammol in final product) × (final product weight) = (% ichthammol in initial product) × (initial product weight)

Let x be the weight of the 20% ichthammol ointment that is needed.

(0.08) × (70 g) = (0.20) × (x)

Solving for x, you get:

0.08 × 70 = 0.20 x x

560 = 0.20 x x

x = 2800/0.20

x = 14000 g

So, you would need 14000 g (14 kg) of 20% ichthammol ointment to make 70 g of 8% ichthammol ointment. Keep in mind that the rest of the 70 g will be made up of petrolatum.

To know more about ointment here

https://brainly.com/question/8486282

#SPJ4

The melting point determined of benzoic acid is in range of 121-123 °C.

Melting point determination of different elements helps to understand the purity of a substance. A pure substance has a melting range of one or two degrees but the range of melting of impure substances is much higher than the pure substance. The melting point also depends on the structure of the molecule.

A melting-point apparatus is a scientific instrument used to determine the melting point of a substance.

Pure benzoic acid has a melting point range of 121-123 °C. If benzoic were contaminated with an impurity, the melting point range might decrease and broaden to 117-120 °C.

To know more about the melting point, here

brainly.com/question/29578567

#SPJ4

c6h5oh and c6h5nh2 are most soluble in water. The solubility of a substance in water is influenced by various factors, such as the polarity of the molecule and the strength of the intermolecular forces between the solvent (water) and the solute (compound).

Among the compounds listed, c6h5oh (phenol) and c6h5nh2 (aniline) are most soluble in water due to their polar nature and hydrogen bonding capability with water molecules. c6h5cl (chlorobenzene) is somewhat soluble in water due to its polarity, but less so than phenol and aniline. On the other hand, c6h6 (benzene) and c6h5ch3 (toluene) are nonpolar and have low solubility in water.

Learn more about compounds here: brainly.com/question/13516179

#SPJ4

1. The type of reaction shown in tge given reaction is a single displacement reaction.

The correct option is C.

2. The type of reaction shown in tge given reaction is a double displacement reaction.

The correct option is D.

Single displacement reactions are reactions in which a radical or an element displaces or replaces another radical or element in a compound.

It is shown below as follows:

AB + C ---> AC + B

Double displacement reactions are reactions in which an exchange of radicals or elements occurs between two compounds when they are mixed together.

It is shown below as follows:

AB + CD---> AC + BD

Learn more about single displacement and double displacement reactions at: https://brainly.com/question/13219117

#SPJ1

The mass of the water is  0.54 g.

The mole is a unit of measurement used in chemistry to express amounts of a chemical substance. It is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of pure carbon-12. This number is known as Avogadro's number, and it is approximately 6.022 x 10^23.

We have to use the concept of the mole here. We know that;

1 mole of water contains 6.02 * 10^23 molecules

x moles of water contains  1.89 x 10^22

x =  1.89 x 10^22 * 1/6.02 * 10^23

x = 0.03 moles

Mass of water = 0.03 moles * 18 g/mol

= 0.54 g

Learn more about mole:https://brainly.com/question/26416088

#SPJ1

Vapor density is defined as the amount of weight of a gas or vapor in comparison to air.

The relative weight of a gas or vapor in comparison to air, which has an arbitrary value of one, is defined as vapor density. If a gas's vapor density is less than one, it will rise in air. When the vapor density exceeds one, the gas will normally sink in air.

Vapor density is only a broad concept used to estimate where vapors might be discovered when released. This physical parameter, however, is not absolute and can be influenced by:

To learn more about vapor density, click here:

https://brainly.com/question/28187501

#SPJ4

The statement that is given indicates that pH of the final solution is around 1.67. Hence option 'b' is correct.

An measurement of a substance's or solution's acidity or basicity. The pH scale ranges from 0 to 14. The pH value of Seven is considered neutral on this scale, meaning that it not acidic or basic. It becomes more acidic if the pH value is below 7, and more basic if the pH value is above 7.

A balanced chemical equation describes how HBr and KOH react.

HBr + KOH → KBr + H2O

number of moles of HBr and KOH

moles of HBr

= (2.1 M) * (0.25 L)

= 0.525 moles

moles of KOH

= (2.5 M) * (0.20 L)

= 0.50 moles

Use the stoichiometry of the balanced chemical equation to determine the number of moles of the salt produced in the reaction:

moles of KBr = minimum(moles of HBr, moles of KOH)

= 0.50 moles

Calculate the concentration of H+ ions in the solution by assuming that all the HBr is neutralized by the KOH.

[H+] = n_HBr / (0.25 L)

= 2.1 M

Now,

pH of the solution is given by-

pH = -log[H+]

= -log(2.1)

= 1.67

To know more about pH visit :

https://brainly.com/question/29766400

#SPJ4

If a vincristine vial is found to be broken and spilled then to properly clean the mess, a fully equipped chemo spill kit is used.

The chemo spill kit includes: Two pairs of nitrile gloves, a disposable safety gown, disposable shoe covers, a face shield covering the full face, 21 grams of solidifier, a scoop and scrapper, two wiper pads, a twist tie, and an ID tag.

Vincristine is a solution (liquid) that is administered into the vein. It is usually administered once a week. The drugs used during the process, the response of the body towards the drug and the type of cancer will determine the length of the treatment.

To know more about vincristine here

https://brainly.com/question/28383899

#SPJ4

The lowest possible melting point for engine coolant that is 29.7% ethylene glycol is -12.85° Celsius.

Depression in freezing or melting point can be given by using the formula:

[tex]T_{f} = i[/tex] × [tex]K_{f}[/tex] × [tex]m^{}[/tex], where:

'i' is the vant hoff factor, '[tex]K_{f}[/tex]' is the freezing point constant for water, and 'm' is the molality. as we know that, molality, m, can be given by the formula:

Molaltity = [tex]\frac{Mass-of -ethylene -glycol}{Molar-mass-of-ethylene-glycol * Mass-of-water-in-kg}[/tex]

Mass of ethylene glycol = 30 % of 100 g solution:

[tex]\frac{29.7}{100}[/tex] × [tex]100^{}[/tex] = 29.7g, rounding it off to 30 g

Mass of water = 100 - 30 = 70 g= 0.070 kg (1000g = 1kg)

Given, [tex]K_{f}[/tex], freezing point constant for water = 1.86° C/m

Thus, putting all these values in the above equation, we get:

[tex]T_{f}[/tex] = 1 × 1.86 × 30/ 62g/mol × 0.070

= 12.85° C (freezing point of 29.7% of ethylene glycol)

Now, calculating the lowest possible melting point:

Δ[tex]T_{f}[/tex] = [tex]T_{} - T_{f}[/tex] = 0 - 12.85 = -12.85° C

[ freezing point for water is 0° C]

To know more about the freezing point, refer:

https://brainly.com/question/29291522

#SPJ4

The average atomic mass of element x is 47 atomic mass units (amu).

The average atomic mass of an element is calculated by taking into account the abundance of each isotope and its corresponding atomic mass. In the case of element x, which has two isotopes with masses of 46 amu and 48 amu and abundances of 75% and 25% respectively, we can calculate the average atomic mass as follows:

(0.75 × 46 amu) + (0.25 × 48 amu) = 34.5 amu + 12 amu = 46.5 amu.

This value rounded to the nearest whole number gives us the average atomic mass of 47 amu (atomic mass units) for element x.

In summary, the average atomic mass is the weighted average of the masses of all isotopes of an element, taking into account their relative abundances.

To learn more about average atomic mass visit: https://brainly.com/question/17722882

#SPJ4

Generally, lead–acid battery consists of two electrodes which are submerged in an electrolyte of sulfuric acid.

Basically lead–acid battery consists of two electrodes submerged in an electrolyte of sulfuric acid. The positive electrode is made up of grains of metallic lead oxide, while the negative electrode of the battery is attached to a grid of metallic lead.

The Lead acid batteries are usually found in a wide variety of applications including small scale power storage such as UPS systems, starting lighting and ignition power sources for automobiles, along with large, grid-scale power systems. There are 3 various types of lead-acid batteries which includes flooded acid, gelled acid, and Advanced AGM (Absorbed Glass Mat) batteries.

The question is incomplete so, I have answered according to general knowledge.

Learn more about lead-acid batteries from the link given below.

https://brainly.com/question/11646521

#SPJ4

When a metal at a higher temperature is absorbed into the water, then at equilibrium the thermal heat lost by the metal is equal to the heat absorbed by the water.

When metal is dropped into water, the heat from the metal transfers to the water, and the water temperature increases. This will increase the average kinetic energy of the water molecules, while the energy of the atoms in the metal will decrease. Thus, the kinetic energy of metal decreases, while the kinetic energy of water increases.

The average particle speed of molecules increases with increasing temperature. Therefore, the average particle velocity of water molecules increases, while that of metal atoms decreases.

When metal is dropped into water, then at thermal equilibrium, the water temperature is the same as the metal temperature. Because the initial temperature of copper is higher than the initial temperature of the water, the water temperature will increase while the metal will decrease.

Learn more about the temperature of the ransom metal in water at https://brainly.com/question/23411503.

#SPJ4

688,000 kilojoules of heat energy would be required to melt 2000 kg of ice.

To calculate the amount of energy required to melt 2000kg of ice, you need to multiply the mass of ice by the heat of fusion per gram.

2000 kg x 1000 g/kg x 344 J/g = 688,000,000 J

So, 688,000,000 joules of heat energy would be required to melt 2000 kg of ice.

It is not utilised to raise the temperature of the substance, but rather to modify the "connections" between the substance's particles, causing it to transition from a solid (stiff connections) to a liquid. Latent heat is the energy your substance needs to change its phase (solid -> liquid) (loose connections).

The amount of heat needed to turn a unit mass of solid into liquid is known as the latent heat of fusion at a specific temperature. For instance, the latent heat of fusion of ice at 0°C is calculated to be 334 kJ/kg, which is the amount of heat needed when ice melts into water. 2

Learn more about heat of fusion here :

brainly.com/question/29505470

#SPJ4

The weight of the glass of water plus the antacid pill will be 234 grams.

When the 4.00-gram antacid pill dissolves into 120 milliliters of water, the weight of the water and the dissolved pill will increase to 124 grams. The glass itself weighs 110 grams, so the combined weight of the glass, water, and dissolved pill will be 110 grams + 124 grams = 234 grams. It is important to note that the mass of the solution will remain the same, as the law of conservation of mass states that mass cannot be created or destroyed, it can only change form.

In this scenario, the mass of the antacid pill has changed form from a solid to a solution.

Complete question is provided in the image below.

Read more about Physical chemistry:

https://brainly.com/question/1433374

#SPJ4

If the boat with the iron nut and bolt and zinc plates is used in the ocean, it is at risk of galvanic corrosion.

Is because the iron and zinc have different electrolysis voltages, so when a current passes through the water around the boat, it will strip away electrons from the zinc, leaving it vulnerable to corrosion.

To counteract this, a third metal, such as a sacrificial anode made of zinc, can be added to the circuit to act as a sacrificial anode, thereby protecting the boat from corrosion.

Learn more about galvanic corrosion:

https://brainly.com/question/20264260

#SPJ4

Answer:

physical changes

Explanation:

the changes are not chemical

Option B. equal to, unsaturated. When a system reaches equilibrium, the rate of dissolution will be equal to the rate of crystallization.

A solution is considered unsaturated if there is still undissolved solute present, which in this case is 1.4 g of KClO₃. When a solid is dissolved in a liquid, the rate of dissolution and the rate of crystallization will both be taking place until the system reaches a state of dynamic equilibrium, where the two rates are equal. At this point, there will be a certain amount of undissolved solute that settles at the bottom of the container, while the remaining solute will be in the solution. The concentration of solute in the solution at equilibrium is known as its saturation level. If there is still undissolved solute present, the solution is considered unsaturated. If all the solute has dissolved, the solution is considered saturated. In the case of the 10.0 g sample of KClO₃ being added to 100 mL of water, 1.4 g of KClO₃ settles out on the bottom of the beaker at equilibrium, meaning the solution is unsaturated and the rate of dissolution is equal to the rate of crystallization.

Learn more about KCLO₃ here: bainly.com/question/19131349

#SPJ4

Complete question:

A 10.0-g sample of KClO₃ is added to 100mL of water, and the solution is stirred periodically until it comes to equilibrium, at which point 1.4 g of undissolved KClO₃ settles out on the bottom of the beaker. Once the system reaches this equilibrium, the rate of dissolution will be ____ the rate of crystallization, and the solution will be ____

A. less than, unsaturated

B. equal to, unsaturated

C. less than, saturated

D. equal to, saturated

E. greater than, saturated

The final state of the hydrogen atom is a lower energy state, or a more stable state. A hydrogen atom in its ground state absorbs a photon of light with a wavelength of 92.57 nm, which excites it to a higher energy state.

When the excited hydrogen atom gives off a photon with a wavelength of 388.8 nm, it returns to a lower energy state.

The final state of the hydrogen atom can be determined by using the relationship between the energy of a photon and its wavelength, as described by Planck's equation:

E = hc/λ

where h is Planck's constant, c is the speed of light, and λ is the wavelength of the photon.

By comparing the energies of the absorbed and emitted photons, we can determine the difference in energy between the initial and final states of the hydrogen atom. If the final state has a lower energy than the initial state, it is a lower energy state, or a more stable state. If the final state has a higher energy than the initial state, it is a higher energy state, or an excited state.

Therefore, the final state of the hydrogen atom is a lower energy state, or a more stable state.

Learn more about hydrogen atoms here: brainly.com/question/29695801

#SPJ4