The correct name for p3o2

While absorption intensity remains constant over time, effective nuclear charge increases. The result of increased electron attraction brought on by a higher effective nuclear charge is a smaller atomic radius.

As the atom gets bigger, the maximum distance between its nucleus and furthest electron valence is usually determined. The magnitude of something like the atomic radius depends on the type the carbon chain in which the particles are enmeshed.

This same closer nuclear is created by dividing by two the dimension seen between the nuclei from two complementary atoms that are bonded together. Typically, an atomic radius diminishes form left to right. Atomic radii in such a bunch often increase from center to bottom.

To know more about atomic radius visit:

https://brainly.com/question/17926486

#SPJ4

Taking into account the reaction stoichiometry, 112.5 grams of water are formed when 12.5 g of hydrogen reacts with oxygen.

In first place, the balanced reaction is:

2 H₂ + O₂ → 2 H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: if by reaction stoichiometry 4 grams of H₂ form 36 grams of H₂O, 12.5 grams of H₂ form how much mass of H₂O?

mass of H₂O= (12.5 grams of H₂×36 grams of H₂O)÷4 grams of H₂

mass of H₂O= 112.5 grams

Finally, 112.5 grams of H₂O are formed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

To calculate the osmotic pressure of a solution made by dissolving 9.37 g of glucose in 51.5 ml of solution at 19.6 degrees Celsius, you need to use the van't Hoff equation.

The equation is: P = (i x R x T) / (M x V), where i is the number of particles of solute (in this case, glucose molecules), R is the ideal gas constant (8.314 J/molK), T is the absolute temperature (in Kelvin, so 19.6 degrees Celsius is 292.7 K), M is the molar mass of the solute (180.16 g/mol for glucose), and V is the volume of the solution (in liters, so 51.5 mL is 0.0515 L).

Plugging these values into the equation gives us P = (2 x 8.314 x 292.7) / (180.16 x 0.0515) = 3.6 atm.

Learn more about the osmotic pressure:

https://brainly.com/question/25904085

#SPJ4

The atom with the largest number of neutrons in the nucleus is B. 157Dy157. The number of neutrons in an atom can be determined by subtracting the atomic number (number of protons) from the atomic mass (number of protons and neutrons).

In the case of 157Dy157, it has an atomic number of 66 and an atomic mass of 157, meaning it has 91 neutrons. The other options, 148Eu148, 149Nd149, 162Ho162, and 159Gd all have fewer neutrons. The number of neutrons in an atomic nucleus can be determined by subtracting the number of protons (atomic number) from the atomic mass (number of protons and neutrons). The atomic number of an element is the same for all isotopes of that element and determines the element's chemical properties, while the atomic mass can vary depending on the number of neutrons present in the nucleus. The number of neutrons in an atom can affect its stability, as well as its behavior in certain reactions. Among the options given, 157Dy157 has the largest number of neutrons, with an atomic number of 66 and an atomic mass of 157, meaning it has 91 neutrons in its nucleus. The other options, 148Eu148, 149Nd149, 162Ho162, and 159Gd all have fewer neutrons in their nuclei.

Learn more about atoms here: brainly.com/question/13654549

#SPJ4

The term "energy calorie" refers to the measurement of heat which is used to indicate the quantity of energy delivered by food.

The ability to perform tasks. It could exist in several different forms, such as theoretical, kinetic, thermal, electromagnetic, chemical, radioactive, etc. Additionally, there is heat and work, which is energy being transferred between one body to the another. Mechanical, pharmacological, electrical, electric and magnetic, thermal, acoustic, and radioactive energy are examples of different types of energy.

As reported by the U.S. Energy Management Administration, coal, nuclear power, and natural gas made up the majority of the country's electrical generation in 2020. Renewable energy sources like wind, electricity, solar, biogas, wind, and thermal are also used to generate electricity.

To know more about energy visit:

https://brainly.com/question/16182853

#SPJ4

—>H3C-Mg-CH3<—Carbon is more electronegative than magnesium. So Carbon gets a partial negative charge and Mg gets a partial positive charge. The bond dipole for dimethylmaganesium.

Magnesium has a partial positive charge because bound pairs of electrons are drawn to it more than carbon, which has a partial negative charge since carbon is more electronegative than magnesium.

An extremely polar carbon-magnesium bond, in which the carbon atom has a partial negative charge and the metal a partial positive charge, characterizes a Grignard reagent. The carbon-magnesium link is more polar than the haloalkanes' carbon-halogen bond.

to know more about carbon-magnesium bonds here:

brainly.com/question/15871695

#SPJ4

Dimethylmagnesium has polar C-Mg bonds with bond dipoles pointing towards the carbon atoms in both CH3 groups.

1. Draw the skeletal structure of dimethylmagnesium, with a magnesium (Mg) atom in the center, bonded to two methyl (CH3) groups, one on each side.

2. Determine the electronegativity difference between the carbon (C) and magnesium (Mg) atoms. Carbon has an electronegativity of 2.55, while magnesium has an electronegativity of 1.31. The difference is 2.55 - 1.31 = 1.24.

3. Since the electronegativity difference between C and Mg is greater than 0.4, the bond between them is polar, and thus has a bond dipole.

4. Draw an arrow on each of the C-Mg bonds to represent the bond dipoles. The arrow should start from the magnesium atom (Mg) and point towards the carbon atom (C), indicating that the bond dipole is directed towards the more electronegative carbon.

Learn more about Dimethylmagnesium here:  brainly.com/question/30512809

#SPJ11

The molar concentration of Ni in the 20.0 mL solution is 2.37 x 10⁻⁷ M. To find the molar concentration of Ni in the 20.0 mL solution, we first need to find the number of moles of Ni in the 5.56 g sample.

Moles of Ni in the 5.56 g sample:

Ni atomic mass = 58.69 g/mol

5.56 g Ni / 58.69 g/mol = 0.095 moles Ni

Next, we need to find the concentration of Ni in the 5.00 mL aliquot of the solution that was diluted to 100.0 mL.

From the analysis, we know the Ni concentration in the analyzed solution was 5.54 ppm. So,

5.54 ppm = 5.54 mg/L = 5.54 µg/mL = 5.54 x 10⁻⁶ g/mL

The 5.00 mL aliquot was diluted to 100.0 mL, so the concentration of Ni in the 5.00 mL aliquot would be:

5.54 x 10⁻⁶ g/mL * (5.00 mL / 100.0 mL) = 2.77 x 10⁻⁷ g/mL = 2.77 µg/mL

Finally, we can find the molar concentration of Ni in the 20.0 mL solution by converting the mass of Ni in the 5.00 mL aliquot to moles:

2.77 µg Ni / 58.69 g/mol = 4.74 x 10⁻⁹ moles Ni

And then, finding the molarity (moles/L) by dividing the number of moles by the volume of the solution:

4.74 x 10⁻⁹ moles Ni / (20.0 mL x 10⁻³ L/mL) = 2.37 x 10⁻⁷ M Ni

So, the molar concentration of Ni in the 20.0 mL solution is 2.37 x 10⁻⁷ M.

Learn more about the atoms here: brainly.com/question/13654549

#SPJ4

As alternative energy sources have an effect on the carbon footprint of communities, cities, and even countries it is necessary to significantly reduce carbon footprints. (E)

The carbon footprint is the amount of carbon or gas emissions produced from various human activities in a certain period of time. The carbon footprint that we produce will have a negative impact on our life on earth, such as drought and reduced sources of clean water, extreme weather and natural disasters, changes in food chain production, and various other natural damages.

The resulting carbon footprint will have a negative impact on life on earth, in addition to natural disasters and extreme weather, the carbon footprint will also result in changes in the production of the food chain and reduced sources of clean water. The higher the carbon footprint on earth, not only causes environmental damage, but can also worsen the level of human health. Therefore, reducing the carbon footprint will help slow down the global warming process that is currently starting to occur.

Learn more about carbon footprint at: brainly.com/question/29548285

#SPJ4

Taking into account the reaction stoichiometry, 11.2 grams of BaSO₄ are produced from 10 g of barium chloride.

In first place, the balanced reaction is:

BaCl₂ + H₂SO₄ → BaSO₄ + 2 HCl

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: if by reaction stoichiometry 208.24 grams of BaCl₂ form 233.34 grams of BaSO₄, 10 grams of BaCl₂ form how much mass of BaSO₄?

mass of BaSO₄= (10 grams of BaCl₂× 233.34 grams of BaSO₄) ÷208.24 grams of BaCl₂

mass of BaSO₄= 11.2 grams

Finally, 11.2 grams of BaSO₄ are formed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

Students who use correct scientific reasoning are Student 1 namely: If the reaction is not allowed to finish, the sodium bicarbonate will not decompose completely, making the final mass higher than the theory.Te corrct amswer is B.

If the sodium bicarbonate is not properly broken down, water and carbon monoxide will not be produced, which can be eliminated to lessen the product's mass. The product will therefore weigh heavier or have a bigger ultimate mass than predicted because of an incomplete reaction.

Given the aforementioned justifications, it is obvious that Student 2 is mistaken in this instance. This is not a scientific explanation in the instance of Student 3 and is merely a wild guess that isn't true in all circumstances.

Learn more about scientific reasoning at brainly.com/question/16981456.

#SPJ4

The molarity of an aqueous solution that is 40.0 percent sulfuric acid (H₂SO₄) by mass has a density of 1.069 g/ml = 4.35 M

Molarity is calculated as moles of solute/liters of total solution.

Sulfuric acid serves as our solute in this instance. Let's assume a basis for computation in order to resolve this issue.

Putting it that way,

100 g is the solution's total weight.

The mass of H₂SO₄:

(40/100) x 100

= 40 gr

The molar mass of H₂SO₄ = 98.079 g/mol.

The number of moles of H₂SO₄:

40 / 98.079

= 0.407 mol

Total volume of the solution:

100 / 1.069

= 93.54 ml = 0.0935 L

Hence,

The molarity of the solution:

0.407 / 0.0935

= 4.35 M

Learn more molarity of the solution here: https://brainly.com/question/30337434

#SPJ4

The element X creates the chloride XCl4, which has 75% by mass of Cl (4 is a subscript of Cl). Titanium serves as the compound's X element.

A mole is the volume of a material (in grams) that has a molecular weight of that substance. For instance, a mole of tricalcium tetra (Ca(H2PO4)2) weight 234.05 grams while a mole of oxygen weighs 12.011 grams.

Chlorine has a molecular weight of 35.5 g/mol.

The chemical XCl4 is made up of four chlorine molecules, or atoms, and makes up 0.75 of its weight.

All four chlorine atoms weigh a total of 4×35 = 140 g/mol

The weight of any and all chlorine atoms in the molecule is now 140/0.75.

The compound's overall weight is now equal to 186.66≈ 187

The mass of element X is equal to 187 - 140 = 47 g/mol.

The molecular mass of titanium is approximately equal to 47 if we match it to any metal from the periodic table.

TiCl₄ is the substance, and its molecular weight is 140 g/mol.

Learn more about Molecular weight here:

https://brainly.com/question/26388921

#SPJ4

Burning sugar is a chemical change as airborne oxygen interacts with sugar, chemical bonds are destroyed and a new molecule is created.

Chemical changes occur when the molecular makeup is totally changed and a new product is created. New products are created via chemical modifications. Chemical alterations are both permanent and irreversible. It demonstrates that modifying or tweaking the experimental changes cannot undo chemical change. During a chemical change, the substance's mass varies. The mass is either added or subtracted. Energy changes occur when a chemical interaction occurs. The production of new bonds in products and the breaking of existing bonds in reactants involve different amounts of energy. When energy is released from the process, it is referred to as an exothermic reaction, and when it is absorbed, it is referred to as an endothermic reaction.

Hence, burning sugar is the chemical change as it changes it's molecular composition and completely new product is  formed.

For more such questions on chemical changes, Refer:

https://brainly.com/question/1222323

#SPJ4

The initial concentration of NaOH in the reaction mixture is 0.028 M, as this is the concentration of the solution that was added to the reaction mixture.

The addition of 6.8 mL of 0.028 M NaOH to 5.5 mL of 0.011 M crystal violet will result in a final volume of 12.3 mL and the concentration of NaOH will be diluted by the addition of the crystal violet solution. The final concentration of NaOH will depend on the reaction that occurs between the two solutions and may not be the same as the initial concentration of either of the solutions added. However, for the purpose of determining the initial concentration, it is considered to be 0.028 M.

Find out more about NaOH

brainly.com/question/21529233

#SPJ4

In the first chemical equation the coefficients are 2,1,1,2 while in second chemical equation are 2,2,4,1.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ1

Helium is the gas that most closely adheres to kinetic theory.

The motion of particles and how they behave within a system are the subject of kinetic theory, a subfield of thermodynamics. It is predicated on the idea that a gas's constituent particles move randomly and continuously, and that the laws of mechanics and thermodynamics can account for this motion.

The foundation of kinetic theory is the idea that gas molecules move randomly and continuously, and that the rules of thermodynamics and mechanics may be used to explain this motion.

Since helium is an ideal gas, it closely complies with the predictions of the kinetic theory. This is due to helium's ability to operate in a straightforward and predictable manner because it is a monatomic gas, which means it is made up of individual atoms rather than molecules. It also has a low molecular weight and no intermolecular forces.

To know more about kinetic theory, visit:

https://brainly.com/question/14388221

#SPJ4

The experimenter should use blue light if an incident green light beam failed to cause any emitted electrons from a metal.

A negative charges subatomic particle known as an electron can either be free or attached to an atom (not bound). Among the three primary kinds of particles within an atom is an electron which is bonded to it. The other 2 are protons & neutrons.

Electrons are the electrical energy's carriers, but electrical engineers and physicists refer to current as the flow of positive charge. Protons in atoms have a positive charge, and because they are tightly bound to the atoms' nuclei, they cannot pass through a wire.

To know more about electron visit :

https://brainly.com/question/6283462

#SPJ4

The longest chain with both carbon atoms in the double bond is the parent chain, which belongs to an alkene. Count the parent chain's carbons starting at the end where the substituents are present and going down to the lowest number.

The parent chain of unsaturated compounds, however, is required to have a double or triple bond in order to comply with the requirement. There are six carbon atoms in the parent chain in this instance.

Order of Contracts (C-Chain) This chain, in which the letter C stands for "contract," is utilized for smart contracts. Def applications The main distinction between the c-chain and the other chains is the usage of an address that may be added to your Meta Mask that is in the Ethereum manner with a 0x at the beginning.

To know more about parent chain's visit :-

https://brainly.com/question/28806692

#SPJ4

The process in which the number of the protons in the nuclide is increased and the mass number will remains constant is beta decay.

The Beta Decay is the  type of the radioactive decay in which the proton is converted into the neutron and vice versa in the nucleus of the radioactive sample. If the protons is converted to the  neutron, it is called as the β⁺ decay.

The example of the beta decay is as follows :

¹⁰C₆   +  ¹⁰B₅  +  ⁰e₁⁺

The protons is increased and the mass number will remain same.  The proton of a carbon atom is converted into the neutron, and the emitted beta particle is the positron.

To learn more about protons here

https://brainly.com/question/14088290

#SPJ4

Light makes everything visible but it allows us to see because our eyes are sensitive to light and our brains process the light signals that went into our eyes.

This is also known as visible light and it is referred to as electromagnetic radiation that can be perceived by the human eye.

It is visible by organisms because the eyes are sensitive to it such that when it hits an object, it is reflected back into our eyes, and that allows us to see the object.

Read more about Light here https://brainly.com/question/166544

#SPJ1

The full question;

Why does light make everything visible when it is the source of light itself or when it's blank off something else?

If you triple the temperature of an ideal gas and double its volume, the pressure of the system would be 3/2 times the original pressure.

The change is according to the Ideal Gas Law, which states that PV = nRT, where,

P = pressure

V = volume

n = no. of moles of gas

R = ideal gas constant

T = temperature.

To find the new pressure, we can rearrange the equation as P = (nRT) / V.

If we triple the temperature and double the volume, the new pressure would be:

P = (nRT) / (2V) = (3 * nRT) / (2 * 2V) = 3P / 2.

So, the new pressure would be 3/2 times the original pressure.

To learn more about Ideal Gas Law:

https://brainly.com/question/20348074

#SPJ4

The dinitrogen oxide contains the 28.01 g of nitrogen in every 44.01 g of dinitrogen oxide. The mass of nitrous oxide can be formed from the 48.7 g of nitrogen is 76.57 g.

The mass of the dinitrogen oxide, N₂O = 28.01 g

The 28.01 g of the nitrogen is present in every 44.01 g of nitrous oxide

Mass of nitrous oxide from 48.7 g of the nitrogen is as follows :

28.01 g of the nitrogen is present in 44.01 g of nitrous oxide

48.7 g of the nitrogen  is present = (48.7 × 44.01 ) / 28.01  g of nitrous oxide.

48.7 g of the nitrogen  is present  = 76.57 g of the nitrous oxide.

Thus the mass of the nitrous oxide is 76.57 g formed from the 48.7 g of the nitrogen.

To learn more about mass here

https://brainly.com/question/14931378

#SPJ4

The most likely mode of decay for 90Sr is beta decay. 90Sr decays to 90Y with emission of a beta particle.

Beta decay occurs when a nucleus has too many neutrons relative to protons, making it unstable. In beta decay, a neutron transforms into a proton, electron, and antineutrino. The electron, also known as a beta particle, is ejected from the nucleus with high energy, while the proton stays inside the nucleus, increasing its atomic number by 1. As a result of this transformation, the atomic number of the parent nuclide (90Sr) increases by 1, transforming into the daughter nuclide (90Y). The daughter nuclide will have the same number of protons, but one more proton than the parent, making it a different element. This process increases the stability of the nucleus, decreasing its neutron-to-proton ratio and bringing it closer to the stability line of isotopes.

Learn more about beta decay here:

https://brainly.com/question/25455333

#SPJ4

Yes, Physical changes include ice melting, boiling water, and water freezing. Only a change in form, dimension, or arrangement can occur during a physical change. Because no new substance is created during the aforementioned modifications, they are therefore physical.

The more vigorous molecules become a gas, spread out, and produce bubbles when boiling takes place. These surface and soar into the sky. It takes energy to change from a liquid to a gas. The liquid also loses thermal energy as the gas molecules leave it.

A change in physical attributes accompanies a physical change. Melting, turning into a gas, changing strength or durability, changing crystal structure or texture, and changing shape, size, color, volume, or density are a few examples of physical qualities.

Melting, changes in size, volume, color, density, and crystal shape are examples of common physical changes.

To know more about physical change visit:

https://brainly.com/question/17931906

#SPJ4

Taking into account the reaction stoichiometry and STP conditions, the volume of O₂ required at STP for complete combustion of 2.3g of ethanol is 3.36 L.

The balanced reaction is:

CH₃CH₂OH + 3 O₂ → 2 CO₂ + 3 H₂O

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The STP conditions refer to the standard temperature and pressure. The values are 0 °C and 1 atmosphere and are reference values for gases. In these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.

It can be applied the following rule of three: if by reaction stoichiometry 46 grams of ethanol react with 3 moles of O₂, 2.3 grams of ethanol react with how many moles of O₂?

moles of O₂= (2.3 grams of ethanol× 3 moles of O₂)÷ 46 grams of ethanol

moles of O₂= 0.15 moles

Then, 0.15 moles of O₂ react.

Now, you can apply the following rule of three: if by definition of STP conditions 1 mole of O₂ occupies a volume of 22.4 liters, 0.15 moles occupies how much volume?

volume= (0.15 moles× 22.4 L)÷ 1 mole

volume= 3.36 L

Finally, the volume of O₂ is 3.36 L.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

A solution where additional solute can be dissolved without outside stress is called: unsaturated solution. This solution is part of solubility.

Solubility is the measure of how much of a substance may dissolve in a certain volume of solvent. The solubility in water is frequently stated as gram/100 mL. There are two types of solubility: saturated solution and unsaturated solution.

A saturated solution is one that has attained its maximal solubility. At this stage, adding extra solute will prevent it from dissolving in the solution.

Unsaturated solutions are those that have not reached their maximum solubility. This implies that even after adding more solute, the solvent would continue to dissolve the solute without outside stress .

Here to learn more about Solubility of Solute:

https://brainly.com/question/23946616

#SPJ4

According to research, carbonated water moisturizes your body equally as effectively as plain water. Your body cannot absorb carbonated water than plain water due to such solution carbon dioxide.

a continuing variation of a colloidal suspension of several or more chemicals in relative proportions up until what is known as the limit limiting solubility. Although concentrations of gases various solids are possible, the term "solution" is most frequently used to refer to the liquid condition of matter.

Each of the different phases of the matter can dissolved in yet another phase in a solution, which is a heterogeneous mixture of molecules. Solution chemistry is significant since the majority of nuclear reactions involve solids, liquids, or gases.

To know more about solution visit:

https://brainly.com/question/23707333

#SPJ4

The amount of energy required to heat the methanol to 100 degrees can be calculated using the equation Q=mcT. Water has a specific heat capacity of 4187 Joules per kilogram. ΔT = 100-43=57,.

The formula q = mcT, where m is the sample's mass, c is its specific heat, and T is the temperature change, can be used to determine how much heat a sample (q) gains or loses.

Q=mcT Q = m c T, where m is the mass of the substance and c is the substance's specific heat capacity, is the equation for the amount of heat needed to alter the temperature of an item in a single phase.

To know more about methanol visit :-

https://brainly.com/question/16866907

#SPJ4

Add [tex]6.263 grams[/tex] of potassium chloride to 91 grams of water to get a [tex]0.874m[/tex] solution.

The molality of a solution is defined as the number of moles of solute dissolved per kilogramme of the solvent.

[tex]Molarity=\frac{n}{W}[/tex]

where,

W = kg of solvent weight and

n = moles of a solute

moles of solute =[tex]\frac{given mass}{molar mass}[/tex]

                         [tex]=\frac{xg}{74.5g/mol}[/tex]

Solvent mass: 91 g, or [tex]0.091 kg[/tex] (1 kilogramme Equals 1000 g).

Now that all the supplied numbers have been combined using the molality formula, we receive

[tex]0.874=\frac{x}{74.5g/mol*0.091kg}[/tex]

[tex]x= 6.263 g[/tex]

In order to produce a [tex]0.874m[/tex] solution,[tex]6.263 grams[/tex] of potassium chloride must be added to 91 grammes of water.

Potassium chloride is a metal halide salt consisting of potassium and chlorine (KCl, or potassium salt). It has no fragrance and resembles a white or colourless vitreous crystal. The substance dissolves readily.

learn more about potassium chloride Refer:brainly.com/question/10724912

#SPJ4