ssure. when the tank is full of oxygen (o2), it contains 8.00 kg of the gas at a gauge pressure of 35.0 atm. determine the mass of oxygen that has been withdrawn from the tank when the pressure reading is 21.6 at

Consequently, the dye's contact time in the 100.00 ml. was 0.171 M.

A homogenous mix comprising two or more parts with particles less than 1 nm is referred to as a solution. Solutions can take various forms, including soda water, salt and sugar solutions, and others.

Let's name the initial solution's percentage "C1."

The intensity of the reaction solution is when 2.00 ml of initial sample is moved to a 100.00 ml of volumetric flask to 100.00 with water.

(2.00 ml) / (100.00 ml + 2.00 ml) * C1 =

0.0195 * C1.

When 5.00 ml of this solution is then diluted to 100.00 ml, the concentration of the final solution is

(5.00 ml) / (100.00 ml + 5.00 ml) * (0.0195 * C1) =

0.0476 * 0.0195 * C1 =

0.000158 M.

So, we can find the original concentration, C1, by rearranging the above equation:

C1 = (0.000158 M) / (0.0476 * 0.0195)

= 0.000158 M / 0.000913

= 0.171 M.

To know more about solution visit:

https://brainly.com/question/29015830

#SPJ4

Answer:

3000 N

Explanation:

The force of the car can be calculated using Newton's second law of motion, which states that the force acting on an object is equal to its mass multiplied by acceleration.

So, the force of the car can be calculated as follows:

Force = Mass * Acceleration

Force = 300 kg * 10 m/s^2

Force = 3000 N

Therefore, the force of the car is 3000 N.

The amount of protons, electrons and neutrons present in a neutral atom of gold are 79, 79, and 118 respectively.

The atomic number of a particular element, which can be discovered on the periodic table, can be employed to figure out the amount of protons in any given atom or element. Additionally, the amount of electrons in a stable, uncharged element is equivalent to the atomic number; in the case of gold, this means that there are 79 electrons.

A subatomic particle with such a negative charge is an electron. A subatomic particle that has a positive charge is called a proton. The strong nuclear force keeps protons together in the nucleus of an atom. A type of subatomic particle lacking charge is the neutron (they are neutral).

Learn more about neutral atom here:

brainly.com/question/9243197

#SPJ4

Percentage of total kcal ( total calories ) comes from fat is 66%

To determine the percentage of total calories that come from fat in a cheeseburger, we first need to calculate the number of calories from fat. Fat has 9 calories per gram, so 25 grams of fat would provide 25 x 9 = 225 calories.

Next, we divide the number of calories from fat by the total number of calories in the cheeseburger and multiply by 100 to find the percentage:

(225 / 340) * 100% = 66.18%

Rounding to the nearest whole number, we can say that 66% of the total calories in a cheeseburger come from fat.

Learn more about total calories here

https://brainly.com/question/1357152

#SPJ4

The very common form of calcium has 20 protons, 20 neutrons, and 20 electrons. This indicates that there are 20 protons in each calcium atom.  and will have 20 electrons.

The chemical element calcium has the atomic number 20 and the symbol Ca. Calcium is a reactive metal that reacts with air to form a dark oxide-nitride layer because it is an alkaline earth metal. It has the most similar chemical and physical properties to its heavier homologues, strontium and barium.  Calcium is a solid at room temperature and is categorized as an alkaline earth metal.

A chemical element is uniquely defined by its atom, a particle of matter. An atom has a central nucleus that is surrounded by one or more electrons with a negative charge. Protons and neutrons, two relatively heavy particles, are found in the positively charged nucleus.

Learn more about Atoms :

brainly.com/question/6258301

#SPJ1

Answer:

Explanation:

The penetration of an electron into the region occupied by core electrons is determined by the electron configuration and the energy of the orbital.

Electrons in 3s orbitals are lower in energy than electrons in 3p orbitals and are therefore closer to the nucleus. As a result, electrons in 3s orbitals penetrate more deeply into the region occupied by core electrons. This means that electrons in 3s orbitals are more strongly attracted to the positively charged nucleus, and have a higher probability of being found closer to the nucleus compared to electrons in 3p orbitals.

In contrast, electrons in 3p orbitals are higher in energy and have a more diffuse distribution, meaning they are less likely to penetrate into the region occupied by core electrons and are more likely to be found farther away from the nucleus.

In conclusion, electrons in a 3s orbital penetrate more deeply into the region occupied by core electrons than electrons in a 3p orbital.

Explanation:

(1mol CuSO4/1mol CuO) x (159.602g CuSO4/1mol CuSO4) = 159.602g CuSO4

Inorganic chemicals, a class of water contaminants, include fertilisers.

In order to give plants the vital nutrients they require for healthy growth and development, fertilisers are compounds that are put to the soil. The three main macronutrients found in fertilisers are nitrogen (N), phosphorus (P), and potassium (K), as well as trace metals including iron, zinc, and magnesium.

Inorganic chemicals, a category of water contaminants, include fertilisers. Fertilizers include vital plant nutrients like nitrogen, phosphorus, and potassium, but if used excessively, they can have a severe effect on the water quality. The excess nutrients from fertiliser runoff can cause toxic algae blooms to proliferate and water bodies to become oxygen-depleted, which can have an impact on aquatic life and lower the quality of drinking water. Fertilizers and other inorganic compounds can also contribute to the rise in total dissolved solids (TDS) levels in water, which causes salinization and reduces the amount of available water.

To know more about fertilizers, visit:

https://brainly.com/question/8996292

#SPJ4

Answer:

621.3°C

Explanation:

To find the new temperature of the neon gas after it expands from 15.0 liters to 45.0 liters, you can use the Ideal Gas Law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin. If the pressure is constant, then P remains constant, so the relationship between volume and temperature can be expressed as:

V1/T1 = V2/T2

where V1 and T1 are the initial volume and temperature, and V2 and T2 are the final volume and temperature.

Substituting the initial values:

V1 = 15.0 liters

T1 = 25.0°C + 273.15 = 298.15 K

And the final values:

V2 = 45.0 liters

We can solve for T2:

T2 = T1 * (V2/V1) = 298.15 K * (45.0 liters / 15.0 liters) = 894.5 K

Finally, we can convert T2 back to Celsius:

T2 = 894.5 K - 273.15 = 621.3°C

In conclusion, if 15.0 liters of neon at 25.0°C is allowed to expand to 45.0 liters, the new temperature must be 621.3°C in order to maintain constant pressure.

we can use this principle law of conservation of mass: 25 g + 26 g = 17 g + x g, where x represents the mass of d produced. Solving for x, we find that x = 34 g, so 34 g of d are produced.

The law of conservation of mass states that mass is conserved in a chemical reaction, meaning that the total mass of reactants must equal the total mass of products.

In a chemical reaction, the law of conservation of mass states that the total mass of reactants must equal the total mass of products. Using this principle, we can solve for the unknown mass of a product in a reaction. In this hypothetical reaction, 25 g of a and 26 g of b react to produce 17 g of c and some amount of d. We can write an equation to represent the relationship between the masses of reactants and products: 25 g + 26 g = 17 g + x g, where x represents the mass of d produced. To find the value of x, we can solve the equation: 25 g + 26 g = 17 g + x g, so x = 25 g + 26 g - 17 g = 34 g. Therefore, 34 g of d are produced in this reaction.

Learn more about law of conservation of mass here:

https://brainly.com/question/28711001

#SPJ4

A pair of electron that isn't shared by the other atoms in a covalently connection is referred to as a lone pair in chemistry and is also known as an unshared pair. Atoms' outermost electron shell contains lone pairs.

The negatively charged particles known as electrons revolve about the outside of the nucleus. For scientists, it might be challenging to monitor them because of how quickly they spin. They are the tiniest elements in an atom and are drawn to the protons' positive charge.

The electron, the smallest constituent part of an atom, has a repulsive force. Protons and electrons are present in an atom in a neutral state in an equal number.

To know more about electrons visit:

https://brainly.com/question/28977387

#SPJ4

The legacy of J. J. Thomson's experiment that led to the identification of the electron was that he was involved in the experiment using cathode material which provided the particles and its emission means that particle was a fundamental part of all atom.

This is referred to as a particle of matter that uniquely defines a chemical element and it consists of a central nucleus that is surrounded by one or more negatively charged electrons.

Thomson concluded that the particle was a fundamental part of all atom because of the electron which was emitted in the experiment.

Read more about Atom here https://brainly.com/question/6258301

#SPJ1

To dilute 130 mL of 7.90 M CuCl2 to 1257 mL to obtain a solution that contains 4.53 g of CuCl2 in 50.0 mL of solution.

What is molarity?

Molarity is a unit of concentration that is widely used in chemistry. It is defined as the number of moles of solute per liter (L) of solution.

Calculation

To dilute 130 mL of a 7.90 M CuCl2 solution so that 50.0 mL of the diluted solution contains 4.53 g CuCl2, you need to determine the moles of CuCl2 in 50.0 mL of the diluted solution and then calculate the final volume of the solution.

First, convert 4.53 g of CuCl2 to moles:

4.53 g / (111.00 g/mol) = 0.0407 moles

Next, calculate the molarity of the diluted solution:

0.0407 moles / 0.05 L = 0.814 M

Finally, multiply the initial volume (130 mL) by the ratio of the initial molarity (7.90 M) to the final molarity (0.814 M) to find the final volume:

130 mL * (7.90 M / 0.814 M) = 130 mL * 9.68 = 1257 mL

To know more about molarity, check out

https://brainly.com/question/26873446

#SPJ4

Explanation:

Pressure and temperature will both increase or decrease simultaneously as long as the volume is held constant. If temperature were to double the pressure would likewise double.

The vapor pressure of a solution of 0.114 mol of cholesterol in 6.72 mol of toluene at 32 degree is 40.6Torr.

The Raoult's Law equation may be used to determine the solution's vapour pressure:

Vapor Pressure of Solution = (Mol Fraction Cholesterol * Vapor Pressure Cholesterol) + (Mol Fraction Toluene * Vapor Pressure Toluene)

Mol Fraction Cholesterol =[tex]\frac{0.114}{ (0.114 + 6.72) }= 0.016[/tex]

Vapor Pressure Cholesterol = 0 (Cholesterol has no vapor pressure)

Mol Fraction Toluene =[tex]\frac {6.72}{(0.114 + 6.72)} = 0.984[/tex]

Vapor Pressure Toluene = 41 Torr

Vapor Pressure of Solution =[tex](0.016 * 0) + (0.984 * 41) = 40.6 Torr[/tex]

Therefore vapour pressure of solution is 40.6Torr.

Any of the lipids, a group of specific chemical compounds, include cholesterol. It is a sterol, which is a subclass of lipid. Toluene, sometimes called toluol, is an aromatic hydrocarbon that has been replaced. It is a colourless, insoluble in water liquid with a paint thinner-like odour.

learn more about Raoult's Law Refer:brainly.com/question/9720507

#SPJ4

In particular, atomic spectra were examined in order to ascertain atomic numbers.

A chemical element's atomic number is its position in the periodic table of elements, which places the elements in ascending order of the quantity of protons in their nuclei. As a result, the atomic number is also determined by the amount of proton, that is everytime equal to the amount of electrons in a neutral atom.

Since atomic number is constant throughout all isotopes of any element and the atomic mass varies with each isotope, an atomic number is frequently more significant than the atomic mass.

To know more about atomic number visit :

https://brainly.com/question/18771650

#SPJ4

False. Rather than lactic acid, glucose is changed to pyruvic acid during glycolysis.

A 2-keto derivative of a propionic acid, pyruvic acid is the 2-oxo monocarboxylic acid. It is a byproduct of the glycolytic process. It functions as a cofactor and a fundamental metabolite. It is similar to the propionic acid in terms of function. It is a pyruvate's conjugate acid.

The simplest -ketoacid, pyruvic acid, is essential for sugar metabolism. It is the end result of the anaerobic breakdown of glucose during glycolysis. During exercise, it is converted to lactic acid in the muscle.

To know more about pyruvic acid visit :

https://brainly.com/question/13631078

#SPJ4

It is advised that your friend take 172-425 grams of carbs, dependant on his size of 86 kg, two hours before to his soccer match. The ideal choice is D.

As a result of the vitamins, nutrients, and dietary fiber they provide, full grain, berries, and vegetables are regarded as healthy carbohydrates. Contrarily, processed or refined carbohydrates like white spaghetti, sweetened beverages, and desserts have little to no nutritious benefit and therefore to be avoided altogether.

Carbohydrates carry out a variety of essential functions in your body. They are the main source of fuel for your brain's calorific values and give you energy for daily chores.

To know more about Carbohydrates visit :

https://brainly.com/question/29775112

#SPJ4

The best statement that describes John Dalton’s use of creativity is that He recorded his results as four parts of the atomic theory, option C.

John Dalton was an English chemist and physicist who lived in the late 18th and early 19th centuries. He is best known for his pioneering work in atomic theory, which he formulated in the early 19th century. According to Dalton's theory, matter is composed of tiny indivisible particles called atoms, which can combine to form molecules.

John Dalton recorded his results as four parts of the atomic theory to describe the fundamental nature of matter. He proposed that all elements are made of tiny indivisible particles called atoms, which are unique to each element.

Find out more on John Dalton here: https://brainly.com/question/17808264

#SPJ1

The solution is made by dissolving 4.857 g of  new polymer in enough water to make 159 ml of solution at 25 °C, the osmotic pressure of the solution is 0.995 atm. The molar mass of the polymer in g/mol is 763.6 g/mol.

The mass of the polymer = 4.857 g

Volume = 159 mL

The osmotic pressure =  0.995 atm

Temperature = 25 °C = 298 K

The expression for the osmotic pressure is as follows :

π = M R T

Where

π = osmotic pressure

M = molarity

R = constant

T = temperature

M = π / R T

M = 0.995 / ( 0.082 × 298 )

M = 0.0407 M

The number of moles = molarity × volume

                                     = 0.0407 × 0.159

                                      = 0.00636 mol

The molas mass = mass / moles

                           = 4.875 / 0.00636

                            = 763.6 g /mol

To learn more about molar mass here

https://brainly.com/question/14643104

#SPJ4

Energizes so D is the answer

Streak is the physical property of powdered mineral which represent its color.

A substance's physical property involves a quality that can be seen or quantified without affecting the substance's identity. Colour, density, toughness, & boiling and melting points are examples of physical qualities. The capacity of a material to go through a particular chemical transition is described by its chemical property.

We need to grasp the physical and chemical features or properties of the many materials in our environment in order to comprehend and utilize them. These characteristics assist us in both identifying and describing materials.

To know more about physical property visit :

https://brainly.com/question/21334123

#SPJ4

Glucose and fructose are produced by degrading larger sugar molecules into disaccharides or polysaccharides. In contrast, the simplest form of fructose can be found in fruits and some vegetables.

Because sucrose is a molecule of sugar that is composed of both glucose and fructose, it is referred to as a disaccharide. Sugar can be found naturally in whole foods as well as in processed foods that have added sugar.

It has little effect on health whether an added sugar contains more or less fructose than glucose. People with diabetes who need to control their blood glucose might be an exception, in which case a sugar with more fructose but less glucose might be preferable.)

To know more about polysaccharides visit :-

https://brainly.com/question/16580858

#SPJ4

From the given variable values, we can calculate the density of the rock sample to be = 2047Kg/m^3

To solve this question, we recollect that density is the mass per unit volume of a substance and the SI unit of density is Kg/m^3 with symbol

The given variables are as follows

mass of rock sample = 4.3g

The volume displaced in the graduated cylinder is

(Final volume level of the cylinder) - (initial volume level of the cylinder)

12.4ml - 10.3 ml= 2.1ml = volume of the rock sample

Therefore, density = 4.3/2.1 = 2.047g/ml = or 1000×2.047 Kg/m^3 =2047Kg/m^3

Density of the rock sample is 2047Kg/m^3

Learn more about Density:

brainly.com/question/1354972

#SPJ4

Four oxygen atoms are in 4.5x1023 units of kmno4. Potassium permanganate (KMnO4) is composed of one potassium atom, one manganese atom, and four oxygen atoms.

For blistering or pus-oozing sores on the surface of your skin, potassium permanganate is applied wetly. both impetigo and athlete's foot. Athlete's foot and impetigo are examples of bacterial and fungal skin illnesses that can be treated with potassium permanganate.

Breathing in potassium permanganate can have negative effects on you. Contact can cause serious skin and eye burns, with a potential eye injury. Potassium permanganate can cause throat and nose irritation when breathed in. Potassium permanganate can irritate the lungs, which can lead to coughing and/or shortness of breath when breathed in.

To know more about potassium visit;

https://brainly.com/question/14571753

#SPJ4

Answer:

spring tide

Explanation:

https://oceanservice.noaa.gov/education/tutorial_tides/media/supp_tide06a.html#:~:text=When%20the%20sun%2C%20moon%2C%20and,both%20commonly%20called%20spring%20tides.

In this case, sodium is the right answer since has molecular concentration of 23g per tone. Therefore, if there were 23g of it, one would have mole of it, which is 6.0 grams or 2 times 10 towards 23rd atoms.

And when your person attempts to dilute more sodium with water, it increases the volume of your blood and makes you retain fluid. Consequently, the excessive thirst, bloating, and increased blood pressure. If you regularly ingest too much salt, this process also stresses your heart, arteries, and kidneys.

A crucial ingredient for wellness is sodium. It is essential for the health of your nerves, muscles, and body's fluid equilibrium.

To know more about sodium visit:

https://brainly.com/question/29327783

#SPJ4

0.625 moles of gaseous oxygen are contained in a balloon holding 20.0 grams of oxygen.

Chemists use the mole, a highly significant measuring unit. Like a dozen eggs implies twelve eggs, owning a mole of anything indicates you possess 602,214,076,000,000,000,000,000 of that item. For exceptionally small objects like atoms, compounds, or other particles, chemists must estimate using moles.

We must divide a substance's weight by its molar mass to determine the number of moles. Oxygen gas (O2) has a molecular concentration of 32.00 g/mol.

20.0 g / 32.00 g/mol

= 0.625 mol

To know more about moles visit:

https://brainly.com/question/26416088

#SPJ4

What you have to do to do an experiment, but find that one of your glass objects is cracked, then replace the cracked glass objects with new ones to avoid experimental errors.

Experiment is a study conducted to find the result of something that is done intentionally by researchers.

Experimental research is also called an experiment which comes from the Latin "ex-periri" which means to test. Experimental research is an action and observation carried out to check hypotheses or identify causal relationships between symptoms. So, it can be said that the experiment is one of the research methods. In carrying out experimental research, you need to understand all matters relating to each experimental component, both components related to the types of variables, the nature of the experiment, characteristics, objectives, experimental requirements, experimental research steps to the form of experimental research design.

The purpose of experimental research is to find or determine the effect of an action on a particular group. Then, the results were compared with other groups that received different actions.

Learn more about experiments on: brainly.com/question/17314369

#SPJ4