Triglycerides, Oil, Cholesterol, and Lipids will come under hydrophobic. Carbohydrates, Glucose, Ions, Polar compounds, and water will come under hydrophilic.
Hydrophilic and hydrophobic are terms used to portray the interaction of molecules with water.
Hydrophilic molecules are those that are attracted to water and will generally dissolve in it. These molecules have polar nature, meaning they have a lopsided distribution of electrons, which permits them to frame hydrogen bonds with water molecules.
Hydrophobic molecules are those that repulse water and don't dissolve in it. These molecules have a nonpolar nature, meaning they have an even dispersion of electrons, which doesn't permit them to shape hydrogen bonds with water molecules.
To learn more about hydrophobic and hydrophilic:
https://brainly.com/question/18522370
#SPJ4
Please Help ASAP - 100 points + Brainliest!!!!!
The heat that have been evolved is 888.4 kJ while the internal energy is 13 J
What is heat of combustion?The heat of combustion is typically determined through a calorimetric experiment, in which a substance is burned in a calorimeter and the heat released is measured and quantified. The heat of combustion can also be calculated from the chemical equation for the combustion reaction, using the principle of the conservation of energy.
Number of moles of the propane = 25 g/62 g/mol
= 0.4 moles
If 1 mole of propane gives out 2221 kJ
0.4 moles of propane would give out 0.4 moles * 2221/1
= 888.4 kJ
We know that;
ΔE = q + w
= 25 - 12
= 13 J
Learn more about heat:https://brainly.com/question/1429452
#SPJ1
calculate the average rate of decomposition of h2o2 between 0 and 2.16 3 104 s. use this rate to calculate the average rate of production of o2(g) over the same time period.
The rate of decomposition of H₂O₂ between 0s and 2.163×10⁴ s is 1.157×10⁻⁵ and rate of production of oxygen during this time will be 5.787×10⁻⁵.
The rate of the reaction can be calculated by using the equation,
Rate, r = [tex]-\frac{1}{2}\frac{[H_{2}O_{2}] }{T}[/tex]
The balanced equation for the decomposition of Hydrogen peroxide is
2H₂O₂ ⇒ 2H₂O + O₂
2 molecules of hydrogen peroxide decomposes to 2 molecules of water and a molecule of oxygen.
Here it is given that initially the concentration of hydrogen peroxide is 1 M and after 2.16×10⁴ s it becomes 0.5 M.
So the Rate of decomposition, R = [tex]-\frac{1}{2} \frac{1.0-0.5}{0-2.163*10^{4} }[/tex]
= 1.157×10⁻⁵ M/s
The initial concentration of oxygen is 0. At 2.163 ×10⁴ s the concentration will be half the amount of H₂O₂ decomposed. So 0.5/2 = 0.25
Rate of production of oxygen = [tex]\frac{1}{2} \frac{0.25-0}{(2.163*10^{4)} -0}[/tex]
= 5.787×10⁻⁵
So the rate of decomposition of hydrogen peroxide is 1.157× 10⁻⁵ and rate of production of oxygen is 5.787 ×10⁻⁵ between 0 and 2.163 ×10⁴ s.
For more details regarding rate of reactions, kindly refer
https://brainly.com/question/15394537
#SPJ4
The complete question is as follows
At 40 C H2O2(aq) will decompose according to the following reaction:
2H2O2 (aq) -----> 2H2O (l) + O2 (g)
The following data were collected for the concentration of H2O2 at various times:
Time (s) H2O2 (mol/L)
1.000 2.16 x 10^4
0.500 4.32 x 10^4
(a) calculate the average rate of decomposition of H2O2 between 0 and 2.16 x 104 s. Use this rate to calculate the average rate of production of O2 (g) over the same time period.
) based on the graph, determine the order of the decomposition reaction of cyclobutane at 1270k. justify your answer.
The order of a chemical reaction can be determined by examining the relationship between the concentration of the reactants and the rate of the reaction.
A graph of the concentration of reactants versus time can provide this information. To determine the order of the decomposition reaction of cyclobutane at 1270K, one would need to have a graph of the concentration of cyclobutane versus time at that temperature and then examine the slope of the graph. If the slope is proportional to the concentration of cyclobutane raised to a power, then the reaction is said to be of that power order. For example, if the slope is proportional to the concentration squared, the reaction is of second order. Justification of the answer would require a detailed analysis of the graph and comparison with the expected behavior for different reaction orders.
Learn more about C4H8 here: brainly.com/question/12759457
#SPJ4
identify the best conditions for reaction a. naoch3 , ch3oh h , naoch3 , ch3oh naoch3 , dmso ch3oh , heat h , naoch3 , dmso
The correct option is D. NaOCH3, DMSO is the best condition for the reaction.
A Chemical reaction is a system that happens when two or extra molecules engage to shape a brand-new product(s). Compounds that engage to produce new compounds are called reactants while the newly formed compounds are known as products.
The processes, wherein a substance or substances go through a chemical change to provide new substance or substances, with entirely new homes, are referred to as chemical reactions. A chemical reaction is a process that results in the chemical transformation of one set of chemical substances to every other. A chemical response occurs when one or more compounds, referred to as reactants, are modified into one or extra wonderful substances, called products. substances are either chemical additives or compounds.
To learn more about Reaction visit here:
brainly.com/question/30115256
#SPJ4
Complete Question:
Select the best conditions for the reactions.
A. CH3OH
B. NaOCH3, CH3OH
C. H+, NaOCH3, CH3OH
D. NaOCH3, DMSO
E. H+, NaOCH3, DMSO
the graphs below represent four polynomial functions which one of these functions has zeros of 2 and -3
The polynomial function with zeros of 2 and -3 is represented by the graph that intersects the x-axis at x=2 and x=-3 and goes through the origin (0,0). So the polynomial is (0,0)
About PolynomialPolynomial is a mathematical statement that involves the sum of the multiples of powers in one or more variables with coefficients. A polynomial in one variable. Polynomial is a coefficients. Operations used by polynomials such as addition, subtraction, multiplication and powers of non-negative integers. Polynomial graph is a slanted line with y intersecting at a0 with a slope of a1. is in the form of a parabola. is in the form of a curve to the power of 3. is in the form of a non-linear curve.
Learn More About Polynomial at https://brainly.com/question/2833285
#SPJ4
the molecular below (ethyne) is more commonlyu known as acetlene it is the simplest alkyje amnd very usefulas a fuel source in weldinh. based on what your learned in calss, draw a molecular orbital picture
The molecular orbital (MO) diagram of Ethyne (C2H2) can be constructed by considering the combination of the individual atomic orbitals (AOs) of the two carbon atoms and the four hydrogen atoms. T
The carbon atoms have a total of 8 electrons and each hydrogen atom has 1 electron.
The bonding orbitals in Ethyne are formed from the overlap of the 2s orbital of one carbon atom and the 2p orbital of the other carbon atom. These bonding orbitals have lower energy than the individual AOs and result in the formation of a covalent bond between the two carbon atoms.
The antibonding orbitals are formed from the overlap of the 2p orbitals of the two carbon atoms, which have higher energy than the individual AOs. These antibonding orbitals result in a weakened bond between the two carbon atoms.
Finally, the hydrogen atoms each contribute a 1s orbital to the MO diagram, which form bonding orbitals with the carbon atoms.
Overall, the molecular orbital diagram of Ethyne shows the distribution of electrons in the molecule and helps to explain its chemical behavior.
Learn more about atomic orbitals here:
https://brainly.com/question/28240666
#SPJ4
various physical characteristics of minerals are used to identify unknown specimens. match the test name with the appropriate description.
Hardness, lustre, colour, streak, specific gravity, cleavage, fracture, and tenacity are only a few of the distinct physical characteristics that most minerals possess.
Hardness, lustre, colour, streak, specific gravity, cleavage, fracture, and tenacity are only a few of the distinct physical characteristics that most minerals possess. A mineral splits through cleavage. One, two, or three cleavage planes can be present in minerals. A mineral can scatter light in a lustrous manner. Metallic, vitreous, earthy, and silky are typical forms of lustre. A mineral's powder is coloured streak. The streak's hue will not always match that of the mineral. relative density is known as specific gravity for water. Some minerals will feel denser than others due to differences in chemical composition. Hardness is scratch resistance or susceptibility. rocky minerals
Learn more about Cleavage
brainly.com/question/30400837
#SPJ4
various physical characteristics of minerals are used to identify unknown specimens. match the test name with the appropriate description.
Cleavage, Hardness
The density of 1 cm3
of water is 1g/cm3
. What is the density of 200 cm3
of pure water?
A student has 25 cubic centimeters of three liquids: blue water(density 1g/cm3
), olive oil (density 0.85 g/cm3
) and corn syrup (density 1.4 g/cm3
). She carefully pours them into a single graduated cylinder. Please predict what will happen.
Responses
Corn syrup on top, water in middle, and olive oil on bottom because oil is most dense.
Corn syrup on top, water in middle, and olive oil on bottom because oil is most dense.
Olive Oil on top, water in middle, and corn syrup on bottom because syrup is most dense.
Olive Oil on top, water in middle, and corn syrup on bottom because syrup is most dense.
It is not possible to predict.
It is not possible to predict.
Skip to navigation
Responses
Corn syrup on top, water in middle, and olive oil on bottom because oil is most dense.
Corn
A student has 25 cubic centimeters of three liquids: blue water(density 1g/cm3
), olive oil (density 0.85 g/cm3
) and corn syrup (density 1.4 g/cm3
). She carefully pours them into a single graduated cylinder. Please predict what will happen.
Responses
Corn syrup on top, water in middle, and olive oil on bottom because oil is most dense.
Corn syrup on top, water in middle, and olive oil on bottom because oil is most dense.
Olive Oil on top, water in middle, and corn syrup on bottom because syrup is most dense.
Olive Oil on top, water in middle, and corn syrup on bottom because syrup is most dense.
It is not possible to predict.
It is not possible to predict.
Skip to navigation
A student has 25 cubic centimeters of three liquids: blue water(density 1g/cm3
), olive oil (density 0.85 g/cm3
) and corn syrup (density 1.4 g/cm3
). She carefully pours them into a single graduated cylinder. Please predict what will happen.
Responses
Corn syrup on top, water in middle, and olive oil on bottom because oil is most dense.
Corn syrup on top, water in middle, and olive oil on bottom because oil is most dense.
Olive Oil on top, water in middle, and corn syrup on bottom because syrup is most dense.
Olive Oil on top, water in middle, and corn syrup on bottom because syrup is most dense.
It is not possible to predict.
It is not possible to predict.
Skip to navigation
A student has 25 cubic centimeters of three liquids: blue water(density 1g/cm3
, olive oil (density 0.85 g/cm3 and corn syrup (density 1.4 g/cm3
She carefully pours them into a single graduated cylinder. Please predict what will happen.
A Corn syrup on top, water in middle, and olive oil on bottom because oil is most dense.
B Olive Oil on top, water in middle, and corn syrup on bottom because syrup is most dense.
C It is not possible to predict.
The density of 200 cm^3 of pure water is 200 g / 200 cm^3 = 1 g/cm^3, and is the same as the density of 1 cm^3 of water.
b. A Corn syrup on top, water in middle, and olive oil on bottom because corn syrup has the highest density of 1.4 g/cm^3, followed by water with a density of 1 g/cm^3, and olive oil with a density of 0.85 g/cm^3.
So option A is correct.
What is density?Density is described as the substance's mass per unit of volume.
We were able to determine which substance will stay in its relative position using Archimedes' principle which states that the upward buoyant force that is exerted on a body immersed in a fluid, whether fully or partially, is equal to the weight of the fluid that the body displaces.
Learn more about density at: https://brainly.com/question/1354972
#SPJ1
Calculate the freezing point and boiling point of each aqueous solution, assuming complete dissociation of the solute. c. 5.5% NaNO3 by mass (in water)
The freezing point and boiling point of a solution can be calculated using the following formula:
Freezing Point = Kf x molality
Boiling Point = Kb x molality
where Kf and Kb are the freezing and boiling point constants respectively.
The molality of a solution is the number of moles of solute (NaNO3) in 1 kg of solvent (water). For this solution, the mass of the solute (NaNO3) is 5.5%, and the mass of the solvent (water) is 94.5%.
Therefore, the mass of NaNO3 = 5.5g/100g = 0.055g
The molar mass of NaNO3 = 85.0 g/mol
Therefore, the number of moles of NaNO3 = 0.055g/85.0 g/mol = 0.000647 mol
The mass of water = 94.5g/100g = 0.945g
Therefore, the molality of the solution = 0.000647 mol/0.945 kg = 0.000682 mol/kg
choose the hydration shells that form around a potassium ion when potassium chloride ( kcl ) dissolves. notice the positive, negative, and partial charges.
When KCl dissolves in water, the K⁺ ion forms a positive hydration shell surrounded by water molecules with partial negative charges, while the Cl⁻ ion forms a negative hydration shell surrounded by water molecules with partial positive charges.
When potassium chloride (KCl) dissolves in water, the potassium (K⁺) ion is surrounded by water molecules with partial negative charges on the oxygen atoms. This creates a hydration shell with a net positive charge, as the positive charge of the potassium ion is balanced by the partial negative charges of the surrounding water molecules.
On the other hand, the chloride (Cl⁻) ion is surrounded by water molecules with partial positive charges on the hydrogen atoms, creating an hydration shell with a net negative charge.
To learn more about hydration shells visit: https://brainly.com/question/10919810
#SPJ4
select all that apply which of the following options correctly describe the arrangement of the periodic table? select all that apply.
Answer: may you please put the possible answers in your question so i can answer it.
Explanation:
Which property of enzymes is being investigated
Enzymes speed up the process while being unaffected by the one they catalyze. Enzyme properties are being researched.
How do enzymes function?The vital function of enzymes is to reduce the activation energy of a reaction, or the number of calories necessary for the process to start. In order to facilitate the chemical bond-forming and bond-breaking processes, enzymes bind to reactant components and hold them in place.
What are enzymes' two main characteristics?As biological catalysts, enzymes quicken the pace of biological reactions. Enzymes change one energy form into a more useful one. Cofactors are elements that help enzymes function. There is a great degree of selectivity in enzymes.
To know more about catalysts visits:
https://brainly.com/question/21793128
#SPJ1
What is the mass of 0.80 moles of Mg?
According to the mole concept, the mass of 0.80 moles of magnesium is 19.44 g.
What is a mole?Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.
Number of moles= mass/ molar mass, thus, mass= 0.80×24.30=19.44 g.
Thus, the mass of 0.80 moles of magnesium is 19.44 g.
Learn more about moles,here:
https://brainly.com/question/26416088
#SPJ1
Suppose you wish to find the % alcohol in a beverage. Alcohol has a density of 0.79 g/mL and water has a density of 1.00 g/mL. Describe how you would use a hydrometer to accomplish this task. What modification might you make in the hydrometer
Check the alcohol concentration using a thermometer and a specific hydrometer called a saccharometer.
What is density?Density is the mass of a homogeneous material per unit volume. d = M/V, within which d is density, M is weight, and V is volume, is the formula for density. Grams per cubic centimeter are a typical unit of measurement for density.
For instance, whereas Earth has a density of 5.51 milligrams, water has a density of 1 milligrams. Another way to state density is in kilograms per cubic meter (in metre-kilogram-second or SI units). Check the alcohol concentration using a thermometer and a specific hydrometer called a saccharometer.
Therefore, check the alcohol concentration using a thermometer and a specific hydrometer called a saccharometer.
To know more about density, here:
https://brainly.com/question/13434141
#SPJ1
A student claims that intermolecular forces are overcome when water boils, but intramolecular forces are not. Which of the following particle diagrams can be used to support the claim?
To support the claim that intermolecular forces are overcome when water boils, but intramolecular forces are not, you can look at diagrams of water molecules both before and after boiling.
Before boiling, water molecules are held together by hydrogen bonds and other intermolecular forces. After boiling, the water molecules are still held together by intramolecular forces, such as covalent bonds, but the intermolecular forces have been broken.
This explains why the water molecules are now free to move around and form a gas.
Learn more about intermolecular forces
https://brainly.com/question/13588164
#SPJ4
select all the statements that correctly describe the reactions involved in the two-step synthesis of benzyl acetate (ch3cooch2c6h5) from toluene.
1. Nitration of toluene to form nitrobenzene (C6H5NO2)
2 Reduction of nitrobenzene to form aniline (C6H5NH2)
3 Acetylation of aniline to form benzyl acetate.
A range of compounds, including colours, rubber accelerators, and medications, are synthesised using the organic component nitrobenzene (C6H5NO2) as an intermediary. It smells distinctively sweet and bitter and is a thick, pale yellow liquid. The nitration reaction, which entails the addition of nitric and sulfuric acids, can be used to create nitrobenzene from toluene since it is water soluble. Despite being widely used in industry, nitrobenzene is a hazardous compound that if inhaled, swallowed, or absorbed through the skin can have detrimental consequences on one's health. Nitrobenzene exposure for an extended period of time can result in methemoglobinemia, a condition in which red blood cells are unable to carry oxygen, as well as other health issues like headaches, dizziness, and skin irritation. appropriate handling,
Learn more about nitrbenzene here:
https://brainly.com/question/13190784
#SPJ4
In the example of adrenaline signaling used in the animation, suppose each amplification step produces hundredfold active molecules. How many total modified protein target molecules result from a single activated signal receptor?
If each amplification step produces hundredfold active molecules, then the total number of modified protein target molecules resulting from a single activated signal receptor would be 1,000,000.
The total number of modified protein target molecules resulting from a single activated signal receptor is 1,000,000 because each amplification step produces hundredfold active molecules.
For example, if you start with one activated signal receptor, after the first amplification step you will have 100 molecules, after the second amplification step you will have 10,000 molecules, and after the third amplification step you will have 1,000,000 molecules. This is the result of multiplying each step by a factor of 100.
Learn more about proteins:
https://brainly.com/question/15604041
#SPJ4
this question is math/chemistry
Use the acidity model ph = - log[H*], where acidity (pH) is a measure of the hydrogen lon concentration [H*] (measured in moles of hydrogen per liter) of a solution.
Apple juice has a pH of 3.1 and drinking water has a pH of 8.3. The hydrogen lon concentration of the apple juice is how many times the concentration of drinking water?
The hydrogen ions in the apple juice is 1.58 * 10^5 time that in the water.
What is the pH?pH is a measure of the acidity or basicity of a solution and can range from 0 to 14, with 7 being neutral.
It can tell us if the solution can be said to be an acid a base or a neutral material as we have in the question here.
The hydrogen ion concentration is obtained as;
[H^+] = Antilog (-pH)
For apple juice= Antilog (-3.1) = 7.9 * 10^-4
For the water = Antilog (-8.3) = 5 * 10^-9
As such we have; 7.9 * 10^-4/ 5 * 10^-9
= 1.58 * 10^5
Learn more about hydrogen ions:https://brainly.com/question/20309096
#SPJ1
show that the fact that 92% of the sun's atoms are hydrogen is consistent with the statement that 73% of the sun's mass is made up of hydrogen.
A hydrogen atom has a mass that is around four times smaller than that of a helium atom.
Assume that N is the total number of atoms in the Sun.
The Sun contains 92% hydrogen atoms, leaving 8% for helium, as seen in Table 15.2, "The Abundance of Elements in the Sun." If MH is assumed to be the mass of an atom of hydrogen, then the mass of hydrogen plus the mass of helium equals the entire mass of the Sun, which is equal to 0.92 N MH + 0.08 N 4MH = MSun, giving us 1.24 N MH = MSun.
Hydrogen's fractional mass is 0.92/1.24, or 74%.
This estimate is 1% too high, albeit it is very near, due to the simple assumption that hydrogen and helium are the sole atoms.
To learn more about hydrogen atom visit;
https://brainly.com/question/1462347
#SPJ4
Correct question:
Show that the statement that 92% of the Sun’s atoms are hydrogen is consistent with the statement that 73% of the Sun’s mass is made up of hydrogen, as found in Table 15.2. (Hint: Make the simplifying assumption, which is nearly correct, that the Sun is made up entirely of hydrogen and helium.)
Reference:
What is the effect of increasing the pressure on the system in an equilibrium state given by the equation2H2O2(l) --> 2H2O(g) + O2(g)?
In the reaction 2H2O2(l) --> 2H2O(g) + O2(g), if the pressure in the system is increased, the reaction will shift towards the side with fewer moles of gas to counteract the increase in pressure and maintain a state of equilibrium.
This means that the reaction will favor the reactants (H2O2) and less product (O2 and H2O) will be produced. The reverse reaction, where O2 and H2O combine to form H2O2, will become more favorable. As a result, the concentration of H2O2 will increase and the concentrations of O2 and H2O will decrease, reducing the total pressure in the system. In other words, increasing the pressure in a system in an equilibrium state will alter the balance between the reactants and products, causing the reaction to shift towards the side with fewer moles of gas.
Learn more about equilibrium:
brainly.com/question/29901689
#SPJ4
Complete each row of the table below by filling in the missing pre
1 mol
1 M mol
1 m mol
1
mol
A
ha
10
10
= 10
= 10
0
0
-1
mol
mol
mol
mol
Н
X
5
Complete of row for mol:
0.01 mol = 10⁻² mol1 M mol = 10³ mol1 m mol = 10⁻³ mol0,1 mol = 10⁻¹ molMol (n) is a unit of measurement in the International System of Units (SI) for the amount of substance. The unit mole is defined as the amount of chemical substance that contains a representative number of particles, for example in atoms, molecules, ions, electrons, or photons. This number of moles is equivalent to the amount of 12 grams of carbon-12 (¹²C).
In 1 mole of substance there are 6.02 × 10²³ particles, thus it is formulated:
Number of particles = n x 6.02 × 10²³
Information:
n: mol
6.02×1023 : Avogadro's number
Mr : relative molecular mass
Ar: relative atomic mass
Learn more about number of particles at https://brainly.com/question/14357742
#SPJ1
A student is trying to experimentally determine the density of water. He obtains a value of 0.72 g/mL. The actual value is 1.0 g/mL.
a. The error in his measurement is:
g/mL
b. The % error in his measurement is:
%
A. The error in the student's measurement is 0.28
B. The % error in the student's measurement is 28%.
What is water density?
Density of water is approximately 1.0 g/mL (grams per milliliter) at standard temperature and pressure, which is defined as a temperature of 20°C (68°F) and pressure of 1 atm. The exact density can vary slightly depending on the temperature and pressure.
There are two main factors which affect the density of water such as
Temperature PurityA. The error in the student's measurement is 1.0 g/mL - 0.72 g/mL = 0.28 g/mL.
B. The % error in the student's measurement is (0.28 g/mL / 1.0 g/mL) * 100% = 28%.
Learn more about density of water here: brainly.com/question/28910531
#SPJ1
Which properties describe elements that are nonmetal gases? Select all that apply.
Multiple select question.
cross out
A)
composed of an extended structure
cross out
B)
composed of individual atoms or diatomic molecules
cross out
C)
high melting point
cross out
D)
low melting point
cross out
E)
strong attractions between particles
cross out
F)
weak attractions between particles
The lone pairs on oxygen in the following compound are best described as... one localized and one delocalized both localized both delocalized
The lone pairs on oxygen in the following compound are best described as "both localized".
Lone pairs refer to non-bonding electrons that are associated with an atom. In a molecule, these electrons occupy orbitals that are centered on the individual atoms and are not shared with other atoms. When two or more lone pairs are present on the same atom, they are localized, meaning they are associated with individual orbitals. lone pair in any element is the free electron in any atom or element. lone pair is the free electron that can move anywhere. When the orbitals overlap, the electrons can become delocalized, meaning they are spread out over a larger region of space. In this case, since both lone pairs are on the same oxygen atom, they are considered to be both localized.
Learn more about lone pair:
brainly.com/question/24174604
#SPJ4
for the gas phase decomposition of 2-bromopropane, the rate constant has been determined at several temperatures. when in is plotted against the reciprocal of the kelv
When the rate constant for the gas phase breakdown of two-bromopropane, CHz HBr, was calculated at various temperatures, a linear plot was produced with a slope of 22.55*104 K and a y-intercept of 29.9.
Who or what uses 2-bromopropane?Its liquid form is called 2-bromopropane. It is used to create other compounds, pharmaceuticals, and colors. An organobromide compound is 2-bromopropane. In organic synthesis, it is used to introduce the isopropyl functional group.
What is the shortened name for bromopropane?1-Bromopropane (1-BP; CAS number 106-94-5), commonly referred to as n-propyl bromide, is a halogenated short-chain alkane utilized as an organic solvent in a variety of commercial and industrial applications, such as the dry cleaning of clothing and the vapor degreasing of metals.
To know more about two-bromopropane, visit :-
https://brainly.com/question/28174412
#SPJ4
In addition to temperature, specific molecules can separate DNA strands. Work to determine which molecule, CH2O, CO(NH2)2, or CH3CH2OH would cause the most disruption to double stranded DNA. Justify your answer with explanations and drawings.
All three of these molecules have the potential to cause disruption to double-stranded DNA, but CH3CH2OH (ethanol) is likely to have the most significant effect.
Ethanol is a denaturant, meaning it interferes with the hydrogen bonding between the base pairs of the DNA molecule, causing the double helix to unwind. This can lead to strand separation, making the DNA unavailable for normal cellular processes such as replication and transcription. CH2O (formaldehyde) and CO(NH2)2 (urea) are also denaturants, but they are typically less effective than ethanol. Formaldehyde is a strong cross-linking agent that can covalently bond to the DNA, potentially causing damage to the molecule. Urea disrupts hydrogen bonding, but it is not as effective as ethanol because of its smaller size. In conclusion, based on the properties of these molecules, ethanol is likely to have the most disruptive effect on double-stranded DNA due to its ability to denature the molecule through interference with hydrogen bonding.
Learn more about Ethanol here:
https://brainly.com/question/25002448
#SPJ4
one of the following ir spectra is that of acetaminophen and the other is of acetanilide. which of the spectra, a or b, do you think corresponds to acetaminophen?
Spectrum A corresponds to acetaminophen.Paracetamol, also known as acetaminophen, is a medication used to treat fever and mild to moderate pain.
Common brand names include Tylenol and Panadol.The advantages of paracetamol usage for fever are unclear because, at a typical dose, it only marginally lowers body temperature; in that regard, it is inferior than ibuprofen. Acute mild migraines may be helped by paracetamol, however recurring tension headaches may only be minimally relieved. However, when the pain is minimal, the aspirin/paracetamol/caffeine combination is effective and is advised as a first-line therapy for both diseases. Ibuprofen is superior to paracetamol in terms of effectiveness for post-surgical pain management. Ibuprofen and paracetamol together have more potency and are better than either medicine alone.
learn more about acetaminophen Refer:brainly.com/question/14368060
#SPJ4
How many grams are in 6.02x1023 formula units of Al2O3?
The number of grams in 6.02 × 10²³ formula units of aluminium chloride is 101.96g.
How to calculate mass?The mass of a substance can be calculated from the formula units by dividing the number of formula units by Avogadro's number.
According to this question, there are 6.02 × 10²³ formula units of aluminum oxide. This means that;
no of moles = 6.02 × 10²³ ÷ 6.02 × 10²³
no of moles = 1 mole
molar mass of aluminium oxide = 101.96g/mol
mass of aluminum oxide = 101.96g/mol × 1 mole = 101.96g
Learn more about mass at: https://brainly.com/question/29353833
#SPJ1
How many F atoms are in 5.54 g of F2?
The number of the atoms in the sample is 1.8 * 10^23 atoms.
What is the number of the Atoms?The mole is a unit of measurement in chemistry used to express amounts of a chemical substance.
The mole is used to determine the number of atoms, molecules, or other entities in a given sample of a substance.
We have to look at the concept of the mole in this question.
We know that to obtain the number of moles of the substances we have;
5.54 g /38 g/mol
= 0.15 moles
Then we would have that from the Avogadro's law;
0.15 moles * 6.02 * 10^23 * 2
= 1.8 * 10^23 atoms
Learn more about moles:https://brainly.com/question/26416088
#SPJ1
The molecular formula is like the ingredients (on a label) from a processed food, e.g., chicken soup. It tells us the amount of atoms of each element necessary to make a specific molecule. Tell the number of atoms for the following molecules:1. oxygen O22. water H2O3. Glucose C6H12O6
The molecular formula for a molecule gives us the number of atoms of each element in the molecule.
The number of atoms for the following molecules is as follows:
Oxygen: The molecular formula for oxygen is O2, meaning that there are two oxygen atoms in one molecule of oxygen.
Water: The molecular formula for water is H2O, meaning that there are two hydrogen atoms and one oxygen atom in one molecule of water.
Glucose: The molecular formula for glucose is C6H12O6, meaning that there are six carbon atoms, twelve hydrogen atoms, and six oxygen atoms in one molecule of glucose.
It is important to note that the molecular formula only gives us information about the number of atoms in a molecule, not about the arrangement of those atoms in space or about the chemical bonds between the atoms. This information is best represented by a molecule's Lewis structure or 3D structure.
Learn more about molecular formula:
brainly.com/question/28647690
#SPJ4