Since an electron has a negative charge, it will move in an electromagnetic field under the Coulomb force. When an electron moves in the opposite direction as the direction of the electric field, we can conclude that: A. It moves from a high potential to a low potential, and its electric energy decreases. B. It moves from a low potential to a high potential, and its electric energy decreases. C. Both its electric potential and electric potential energy stay constant. D. It moves from a low potential to a high potential, and its electric energy increases. E.It moves from a high potential to a low potential, and its electric energy increases.

If the meniscus is between 11 mL and 12 mL, the volume can be estimated as 11.5 mL.

A buret is a laboratory tool used to dispense and measure the volume of liquid. It has a cylindrical shape and graduated marks along its length to indicate the volume of liquid it contains. To measure the volume of liquid, the meniscus, the curved surface of the liquid, is read at the lowest point.

When the meniscus is exactly between two graduated marks, the volume can be estimated by taking the average of the two marks. In this case, if the meniscus is between 11 mL and 12 mL, the volume can be estimated as:

(11 mL + 12 mL) / 2

= 11.5 mL.

Learn more about meniscus in buret here:

https://brainly.com/question/14667250

#SPJ4

35.0 g of C4H10O in 250.0 g of ethanol (C2H5OH) have the highest boiling point.

Organic substances include ethanol. With the chemical formula C2H6O, it is an alcohol. Its chemical formula can alternatively be expressed as CH3CH2OH or C2H5OH (an ethyl group linked to a hydroxyl group). A volatile, flammable, colourless liquid known as ethanol has a distinctive wine-like odour and bitter flavour.  It is a euphoric recreational substance that serves as the primary component of alcoholic beverages.Natural sources of ethanol include the fermentation of carbohydrates by yeasts or petrochemical processes like ethylene hydration. It has current medicinal uses as an antiseptic, disinfectant, solvent for certain drugs, and an antidote for methanol and ethylene glycol toxicity in addition to its historical usage as a general anaesthetic.

learn more about boiling point refer:brainly.com/question/24168079

#SPJ4

complete question:Which of the following solutions will have the highest boiling point? Input the appropriate letter.

A. 35.0 g of C2H6O2 in 250.0 g of ethanol (C2H5OH)

B. 35.0 g of C3H8O in 250.0 g of ethanol (C2H5OH)

C. 35.0 g of C4H10O in 250.0 g of ethanol (C2H5OH)

The molar mass of the unknown non-electrolyte solute is 19.47 g/mol.

The boiling point elevation can be used to calculate the molality of the solution, which is defined as the number of moles of solute per kilogram of solvent. This can then be used to calculate the molar mass of the solute.

The formula for boiling point elevation is:

ΔTb = Kb x molality

where ΔTb is the change in boiling point, Kb is the boiling point elevation constant for the solvent, and molality is the number of moles of solute per kilogram of solvent.

First, we need to calculate the molality of the solution:

molality = ΔTb / Kb

molality = (82.1°C - 76.5°C) / 4.95 K/m

molality = 0.0177 m

Next, we can calculate the number of moles of solute in the solution:

moles = molality x mass of solvent

moles = 0.0177 m x 50.0 g / 1000 g/kg

moles = 0.88 g

Finally, we can calculate the molar mass of the solute:

molar mass = mass of solute / moles

molar mass = 17.08 g / 0.88 moles

molar mass = 19.47 g/mol

Therefore, the molar mass of the unknown non-electrolyte solute is 19.47 g/mol.

Learn more about molality here: https://brainly.com/question/26921570

#SPJ4

According to Gay-Lussac's law,  the temperature of the fire at 39.3 atmospheres is 1350.82 Kelvin.

It is defined as a gas law which states that the pressure which is exerted by the gas directly varies with its temperature and at a constant volume.The law was proposed by Joseph Gay-Lussac in the year 1808.

The pressure of the gas at constant volume reduces constantly as it is cooled till it undergoes condensation .It is given as, P₁/T₁=P₂/T₂, thus T₂= 295.6×39.3/8.6=1350.82 kelvin

Thus, the temperature of the fire at 39.3 atmospheres is 1350.82 Kelvin.

Learn more about Gay-Lusac's law,here:

https://brainly.com/question/1358307

#SPJ1

Sucrose is included in the package at an amount of 0.113 moles. Number of moles = Mass of substance / Mass of one mole.

Each element's symbol is followed by a subscript that counts how many atoms of that element are present in the molecule. As a result, 12 moles of carbon, 22 moles of hydrogen, and 11 moles of oxygen make up 1 mole of sucrose.

For instance, if we are aware of a substance's mass and chemical make-up, we can compute its molecular weight and estimate the number of atoms or molecules present. Similar to how we can calculate the number of atoms or molecules in a substance by knowing its mass, we can do the same thing if we know its number of moles.

39 g makes up the sucrose's bulk.

The mole ratio of sucrose is 342.3 g/mol.

To determine the sugar moles, we

Sucrose moles equal 39g /342.3 = 0.113

The molecules of sucrose are therefore 0.113 mol.

To know more about moles visit:

https://brainly.com/question/14357742

#SPJ4

Rutherford chooses gold because of it's most malleable property of this metal. no, he couldn't use other metal as gold is the thickest property and can be beaten to the thinnest sheet.

Rutherford picked gold because it is the most malleable metal and he desired the thinnest coating possible for his scattering experiment. The used goldsheet had a thickness of roughly 1000 atoms. Rutherford chose a Gold foil as a result for his alpha scattering experiment. Gold is the most malleable metal, and Rutherford sought the thinnest layer possible for his scattering experiment. The gold sheet utilised had a thickness of about 1000 atoms. Rutherford chose a Gold foil as a result for his alpha scattering experiment. thin gold foil, very thin. A heavy metal with a high mass number is gold. Because the atom of a light metal will simply be pushed ahead when struck by a fast-moving a-particle, no scattering can take place, the material cannot be used. Gold is also the most malleable metal. To acquire the clear observations, a gold foil only 1000 atoms thick can be created.

For more such questions on rutherford experiment, refer:

https://brainly.com/question/1563766

#SPJ4

The correct option is D, I = 3H; II = 4H; III = 4H protons are represented by each signal. Signal I: 0.9 ppm, integration = 3.3 Signal II: 1.4 ppm, integration = 2.2 Signal III: 3.5 ppm, integration = 2.2.

A proton is a subatomic particle that is found in the nucleus of an atom. It has a positive charge and, along with neutrons, makes up the atomic nucleus. Protons are one of the building blocks of matter, and their number determines an element's atomic number and chemical properties.

Protons are made up of two "up" quarks and one "down" quark, held together by the strong force. The strong force is one of the four fundamental forces of nature and is responsible for binding the protons and neutrons in the nucleus. The proton's positive charge also plays a crucial role in determining the behavior of atoms and molecules, as it interacts with the electrons in the outer shell of an atom.

To learn more about Protons visit here:

brainly.com/question/1252435

#SPJ4

Complete question: -

There are three signals (listed below as I, II, and II) in the 'H NMR spectrum of a compound with the molecular formula C6H140. For each of the three signals, the chemical shift and relative integration value are provided. How many protons are represented by each signal? Signal I: 0.9 ppm, integration = 3.3 Signal II: 1.4 ppm, integration = 2.2 Signal III: 3.5 ppm, integration = 2.2

A. I = 3H; II = 2H; III = 2H

B. I = 6H; II = 2H; III = 2H

C. I = 6H; II = 4H; III = 4H

D. I = 3H; II = 4H; III = 4H

The statement correctly classifies the solutions is:

The solution in the balloon is hypertonic relative to the solution in the beaker.

As per the given data a balloon that is permeable to water but not to glucose contains a 10% glucose solution.

A beaker contains a 5% glucose solution.

Here we have to determine which statement correctly classifies the solutions.

A solution which has higher solute concentration than other solution is called a hypertonic solution.

The solution with lower solute concentration than other solution is called hypotonic solution and the solutions with same solute concentration is called isotonic solution. Here the concentration of solute insolation in balloon is higher than that of concentration of solutes in the beaker solution, so relatively it is hypertonic.

The correct answer is option,

b) The solution in the balloon is hypertonic relative to the solution in the beaker.

For more questions on the glucose solution and permeability

https://brainly.com/question/14748422

#SPJ4

A balloon permeable to water but not to glucose contains a 10 % glucose solution. A beaker contains a 5 % glucose solution. Which of the following is true?

(a)When placed in the beaker, the balloon will lose water by osmosis.

(b)The solution in the balloon is hypertonic relative to the solution in the beaker.

(c)The solution in the balloon is isotonic; the solution in the beaker is hypertonic.

(d)The solution in the beaker is hypertonic relative to the solution in the balloon.

In a face-centered cubic (FCC) lattice, each unit cell has 8 corner atoms and 1 center atom. Thus, a unit cell of a FCC lattice of copper would contain 8 corner copper atoms and 1 center copper atom, giving a total of 8 + 1 = 9 copper atoms in the unit cell.

In a face-centered cubic (FCC) lattice of copper, the unit cell is made up of 8 corner atoms and a single atom in the center. Each corner atom of the unit cell is shared with 8 other unit cells and the center atom is shared with a total of 8 unit cells. Therefore, the number of copper atoms in a unit cell of an FCC lattice of copper is 8 corner atoms + 1 center atom = 9 atoms. This is a basic characteristic of FCC structures, which are very commonly found in metals and are known for their high packing efficiency and close-packed arrangement of atoms.

Learn more about Copper here: brainly.com/question/13677872

#SPJ4

[tex]5.76 grams[/tex] of CO2 are included in 2 litres of sparkling water.

At 2.4 atm (25 °C), 2 litres of sparkling water have a capacity of 2.4 litres.

Following is the mass of CO2 in 2 litres of sparkling water:

[tex]1.10 g/ml * 2.4 atm *2.4 litres\\ \\= 5.76 g of CO2[/tex]

2 litres of sparkling water have [tex]5.76 grams[/tex] of CO2 in them.

Sparkling water and still water both hydrate. All sparkling waters, however, are not made equal. It's important to read the nutrition label before purchasing a sparkling water product since some may include extra sugars or artificial sweeteners. Dehydration can be aided by sparkling water.Chronic dehydration can result in constipation, cardiac and kidney issues, as well as digestive issues.

learn more about Dehydration Refer:brainly.com/question/28207006

#SPJ4

Answer:

2024.70 J

Explanation:

The heat capacity of the coffee cup calorimeter can be calculated using the following formula:

q_calorimeter = q_water + q_water_final

where q_calorimeter is the heat absorbed by the coffee cup calorimeter, q_water is the heat lost by the warm water, and q_water_final is the heat gained by the cold water.

First, calculate q_water:

q_water = m_water * c_water * ΔT

where m_water = 25.0 g is the mass of the warm water, c_water = 4.184 J/g°C is the specific heat of water, and ΔT = (40.0°C - 29.5°C) = 10.5°C is the change in temperature.

q_water = 25.0 g * 4.184 J/g°C * 10.5°C = 1057.35 J

Next, calculate q_water_final:

q_water_final = m_water * c_water * ΔT

where m_water = 25.0 g is the mass of the cold water, c_water = 4.184 J/g°C is the specific heat of water, and ΔT = (29.5°C - 20.0°C) = 9.5°C is the change in temperature.

q_water_final = 25.0 g * 4.184 J/g°C * 9.5°C = 967.35 J

Finally, calculate the heat capacity of the coffee cup calorimeter:

q_calorimeter = q_water + q_water_final = 1057.35 J + 967.35 J = 2024.70 J

So the heat capacity of the coffee cup calorimeter is 2024.70 J.

When doing a kinetic research utilizing the method of starting rates, the reaction is repeated several times. While the concentration of one reactant varies, the other is maintained constant.

A component which is present at the outset of such a chemical reaction is known as a reactant. Products are the material to a right of the arrow. A substance which is present following a chemical reaction is known as a product.

In a reaction, reactants are substances that combine to create simple or complex molecules. After a reaction occurs between 2 or more reactants, products are produced. Chemical equations are impossible without the presence of reactants.

To know more about reactant visit :

https://brainly.com/question/12704036

#SPJ4

Since liquids are frequently flammable, they will transition into the vapor phase when the temperature is raised high enough.

The total vapor pressure above a mixture of two volatile liquids can be forecast using Raoult's law. In fact, the more volatile molecule will have a larger mole fraction in the vapor phase than in the liquid phase, resulting in a composition of the vapor that differs from that of the two liquids.

Condensation is the term for this action. The pressure exerted by a vapour with its condensed phases (solid or liquid) in a closed system at a specific temperature is referred to as vapour pressure, also known as vapour equilibrium pressure.

The partial pressures of the constituents dictate the composition of the vapour phase in equilibrium with the solution.

To know about liquid phase

https://brainly.com/question/20302012

#SPJ4

The percent composition of oxygen in tripotassium phosphate is 30.15%.

Percent composition  is defined as a convenient way to record concentration of solution.It is a expression which relates mass of an element  to compound as,mass of element/mass of compound ×100.

In the given compound of tripotassium phosphate the molar mass is 212.27 g/mole, while that of oxygen is 16×4=64 g/mole.Thus, the percent composition of oxygen in tripotassium phosphate is 64/212.27×100=30.15%.

Thus, the percent composition of oxygen in tripotassium phosphate is 30.15%.

Learn more about percent composition,here:

https://brainly.com/question/20527749

#SPJ1

The nucleus contains protons and neutrons.

A electrons

B neutrons

Temperature in thermosphere increases with increase in altitude.

Layers of the atmosphere are troposphere, stratosphere, mesosphere and thermosphere. The thermosphere is the uppermost layer of the Earth's atmosphere which ranges from 90 km to 600 km, located above the mesosphere and below the exosphere.

Thermosphere has very low atmospheric density due to this it is highly energetic with many ions and electrons. Even if the atmospheric density is very low in the thermosphere the temperature was actually increased in a dramatic manner.

While the temperature rises in the thermosphere, the overall energy density is low, making it feel cold to the touch. Heat is not effectively transferred to the lower atmospheric layers in the absence of convection.

Learn more about thermosphere:

https://brainly.com/question/9469619

#SPJ4

Heat and light are the two types of energy which are usually a product of combustion reactions.

A combustion reaction is a type of chemical reaction in which any combustible material reacts with an oxidizer to create an oxidised product. The release of energy in the form of heat and light are frequently associated with combustion reactions.

A fuel and an oxidant, often atmospheric oxygen, undergo a high-temperature exothermic redox chemical reaction known as combustion reactions or burning to generate oxidised, frequently gaseous products in a mixture known as smoke.

Oxygen combines with another substance to produce chemical reaction processes, which release heat and light. Examples of common combustion reactions are the burning of coal, methane gas.

To learn more about combustion reactions please visit
https://brainly.com/question/30562669
#SPJ4

Answer:

3.53 g/mL

Explanation:

to start this we need to find the displacement volume which we do by subtracting 36.4-32.3= 4.1 mL then we can plug in these numbers to the density formula p=m/v where m=14.5 and v=4.1

14.5/4.1 = 3.53 g/ml

The density of the metal in the given problem is calculated by dividing its given mass (14.5g) by the volume displacement in the graduated cylinder (4.1ml). The calculated density of the metal is approximately 3.54 g/ml.

To determine the density of the metal, we need to use the formula density = mass/volume. In this case, the volume of the metal can be found by subtracting the initial water volume in the graduated cylinder from the final volume - so 36.4 ml - 32.3 ml, gives us 4.1 ml for the volume of the metal. The given mass of the metal is 14.5 g. Using these numbers in our density formula, we find that the density of the metal = 14.5 g / 4.1 ml = approximately 3.54 g/ml.

https://brainly.com/question/34199020

#SPJ2

Hydrochloric acid would totally react with 2.2 grams of zinc nail to yield 0.75 liters of hydrogen.

Hydrogen gas is created when zinc plus hydrochloric acid combine. We must understand proper balanced chemical equation of the reaction and the quantity of zinc that reacts in order to calculate the number of liters of water vapor generated.

The balanced chemical equation is:

Zn + 2HCl → ZnCl2 + H2

We may get the amount of moles using mass of zinc:

n = m/M

where n is the number of moles, m is the mass of zinc (2.2 g), and M is the molar mass of zinc (65.38 g/mol).

n = 2.2 g / 65.38 g/mol = 0.0337 mol

The volume of hydrogen gas generated may be determined using the formula below since one mole has a density of 22.4 L at normal pressure and temperature (STP):

V = n * 22.4 L/mol = 0.0337 mol * 22.4 L/mol = 0.75 L

To learn more about hydrochloric acid visit:

https://brainly.com/question/15231576

#SPJ4

The heat that is required to increase the temperature of 2.10 mol of an ideal gas by 60.0 k near room temperature if the gas is held at constant volume and is diatomic is 2618.91 J.

n = no. of mol= 2.10 mol

T = Temperature = 60.0 K

Q = nCv × ∆T .........eqn(1)

Where CV = molar heat capacity =5/2R for diatomic particle ,such as H₂

CV = molar heat capacity = 3/2R for diatomic, such as H

R = gas constant = 8.314 J/mol × K

Q = heat energy

For a diatomic molecules

Q = n Cv × T

But

Cv = molar heat capacity = 5/2R = 5/2(8.314) = 20.785

CV = 20.785

∆T= Temperature= 60.0 K

Then substitute the values into the eqn(1)

Q = 2.10 × 5/2(8.314) × 60

Q = 2.10 × 20.785 × 60

⇒ Q = 2618.91 J

Learn more about heat from the link given below.

https://brainly.com/question/29520000

#SPJ4

To calculate the milliliters of atropine needed, divide the dose ordered by the concentration of the solution. So, you would need to give 1.67 ml of the 0.30 mg/ml atropine solution intramuscularly.

When a physician orders a specific dose of atropine, such as 0.50 mg intramuscularly, it is necessary to determine the volume of the solution that should be administered. This calculation can be done by dividing the dose ordered by the concentration of the solution. In this case, if the atropine is available as 0.30 mg/ml, the calculation would be 0.50 mg ÷ 0.30 mg/ml = 1.67 ml. This means that 1.67 ml of the 0.30 mg/ml atropine solution would need to be given intramuscularly to meet the 0.50 mg dose ordered by the physician. This calculation is important to ensure that the correct dose of medication is given to the patient for optimal therapeutic effect

To know more about the calculation of dosage, visit:https://brainly.com/question/1249197

#SPJ4

20% is the mass/volume percent of a solution prepared from 15.0 g NaCl in 75.0 g solution if the density of the solution is 1.00 g/ml.

The volume percentage of a component = (Volume of the component/Total volume of the solution) x 100
Mass by volume percentage: It is the mass of solute dissolved in 100 mL of the solution.

The measure of how densely a material is packed together is called density. As the mass per unit volume, it has that definition. Density Formula: = m/V, where is the density, m is the object's mass, and V is its volume.

mass of solute = 15.0 g of NaCl

mass of solvent = 75.0 g of water

solute + solvent = 15.0+ 75.0 = 90g
(15g/90g) x 100 = 20%

To learn more about volume percentage, please visit -
https://brainly.com/question/29278275
#SPJ4

The forces of attraction respective to the intermolecular forces is a hydrogen bond. It is a very specialized type of dispersion force.

What are the intermolecular forces?

Types of Intermolecular Forces are:

Dispersion,

Dipole–Dipole,

Hydrogen Bonding, and

Ion-Dipole

A hydrogen bond is a very specialized type of dispersion force regarding intermolecular force.

Noble gases are monoatomic as they are unlikely to react with any other atoms since they exist in a stable state and are also nonpolar. This implies that the strongest intermolecular forces they can experience are London Dispersion forces(LDFs). LDFs are the weakest interactive forces that are found in any molecule.They are temporary attractive forces formed when electrons between two atoms are unevenly distributed forming temporary dipoles.

Learn more about intermolecular forces:

brainly.com/question/17111432

#SPJ4

A characteristic property of metals, non-metals, and metalloids is that if a metal is an electropositive element (as a positive ion), it can generally form basic compounds and ionic compounds. Meanwhile, non-metallic elements exhibit properties that are opposite to those of metals and metalloid elements that have a low level of metallic behavior.

Metal or metal elements are elements that have general physical properties such as being solid, having a high melting point, flexible (not easily broken), easy to shape (can be forged and pulled), good conductors of heat and electricity, and can be alloyed with each other. metal. While its chemical properties include electropositive elements (as positive ions), generally it can form basic compounds and ionic compounds.

Non-metallic elements are groups of elements that exhibit properties that are opposite to those of metals, Group that has almost no metallic properties; a group of elements whose properties include: not hard, not tough (brittle and easily broken), can conduct heat and electricity, and has a low melting point.

Metalloids are elements that have a low degree of metallic behavior. Metalloids exhibit some metallic and some nonmetallic properties. The appearance of metalloids can be dull or shiny. Although they are not very good thermal and electrical conductors, metalloids are capable of conducting heat and electricity.

Learn more about metals and non metals at: brainly.com/question/28650063

#SPJ4

Following are the answers:

1. 10.0 grams NaH dissolved in 2.000 kg of water:

  10.0 / (23.0 + 1.0) = 0.400 moles

   m = 0.400 moles / 2.000 kg = 0.200 m

2. 40.0 grams NaOH dissolved in 1500 grams of water:

    1500 grams = 1.500 kg

     40.0 / 40.0 = 1.000 moles

     m = 1.000 moles / 1.500 kg = 0.667 m

3.  80.0 grams NaOH dissolved in 1.000 kg of water:

    80.0 / 40.0 = 2.000 moles

    m = 2.000 moles / 1.000 kg = 2.000 m

4. 20.0 grams of NaOH dissolved in 2.000 kg of water:

   20.0 / 40.0 = 0.500 moles

    m = 0.500 moles / 2.000 kg = 0.250 m  

Molality is a measure of the concentration of a solution that expresses the number of moles of solute present in a specified mass of solvent, typically per kilogram of solvent. It is represented by the symbol "m" and is calculated by dividing the number of moles of solute by the mass of the solvent in kilograms.

Molality is commonly used in chemical and biological applications, as it provides a more accurate measure of solution concentration than other measures such as molarity, which is based on the volume of the solvent. Molality is particularly useful in situations where temperature changes could cause significant changes in the volume of the solvent, as it is independent of temperature.

Learn more about molality, here:

https://brainly.com/question/26921570

#SPJ1

The molality is an important method to calculate the concentration of a solution. The molality of the given solutions are  0.209 mol kg⁻¹, 0.66 mol kg⁻¹, 2 mol kg⁻¹ and  0.25 mol kg⁻¹.

The molality of a solution is defined as the number of moles of the solute dissolved in 1 kg of the solvent. It is usually denoted by the symbol 'm'. The equation used to calculate the molality is:

m = Number of moles of the solute / Mass in kg of the solvent

n = Given mass / Molar mass

1. 10.0 / 23.9 = 0.41 moles

m = 0.41 / 2.0 = 0.209 mol kg⁻¹

2. 40.0 / 39.99 = 1. 0 moles

m = 1.0 / 1.5 = 0.66 mol kg⁻¹

3. 80.0 / 39.99 = 2.0 moles

m = 2.0 / 1.0 = 2 mol kg⁻¹

4. 20. 0 / 39.99 = 0.50

m = 0.50 / 2.0 = 0.25 mol kg⁻¹

Thus the molality of the given solutions calculated.

To know more about molality, visit;

https://brainly.com/question/26921570

#SPJ1

The number of subatomic particles that the isotope has is 63 protons, 63 electrons, and 90 neutrons.

Subatomic particle is a particle that composes an atom. In general, an atom can be broken down into three types of subatomic particles: protons, electrons, and neutrons.

By the question above, we are given this information:

The atomic number is the number of protons, which means that the isotope has 63 protons.

The atomic number is also the number of electrons, which means that the isotope has 63 electrons.

The number of neutrons is the mass number - atomic number, which means that the isotope has 153 - 63 = 90 neutrons.

Learn more about subatomic particle at https://brainly.com/question/9534177

#SPJ4

Answer:

Yes

Explanation:

Although rust is considered the result of an oxidation reaction, it's worth noting not all iron oxides are rust. Rust forms when oxygen reacts with iron, but simply putting iron and oxygen together isn't sufficient. Although about 21% of air consists of oxygen,1  rusting doesn't occur in dry air. It occurs in moist air and in water.

The difference between intramolecular and intermolecular is described below.

Intramolecular means between different parts of the same molecule while intermolecular denotes from one molecule to another i.e. between molecules.

Based on the above definition, it can be said that intramolecular forces are the forces that hold atoms together within a molecule while intermolecular forces are forces that exist between molecules.

For example, the force that holds oxygen and hydrogen atoms together in water molecule is called intramolecular force while the force that holds two water molecules together is intermolecular force.

Learn more about intermolecular and intramolecular at: https://brainly.com/question/29690903

#SPJ1

The response to the question is that the polymer's molar mass is (7.99 × 10^-3 g/torr-L)

Avogadro's quantity (6.022 x 1023) of atoms or formula units make up one mole of a substance. The volume of mole of a substance of a chemical is indicated by its molar mass.

The Van 't Hoff method may be used to get the polymer's molarity from its osmotic pressure: = iRT/V.

where P is the gas constant, I the van 't Hock factor (number of nanoparticles per molecule), R the osmotic, T the temp in Kelvin, and V the volume a mole of solute occupies.

By rewriting the equation and inserting therefore first, one may get the molar mass (M):

Substituting the given values:

M = (i)(0.0821 Latm/molK)(303 K)/(26.9 torr)(0.251 L) =

7.99 × 10^-3 g/torr-L

To know more about molar mass visit:

https://brainly.com/question/14657944

#SPJ4

The average atomic mass of the element based on the given data is 91.3.

The average atomic mass of an element is calculated by multiplying the masses of all of its isotopes by the element's natural abundance.

The average atomic mass of the element is calculated as follows:

Average atomic mass = sum of isotopic mass * relative abundance of each isotope

average atomic mass = (90 * 0.5145) + (91 * 0.1122) + (92 * 0.1715) + (94 * 0.1738) + (96 * 0.028)

The average atomic mass = 91.3

Learn more about average atomic mass at: https://brainly.com/question/29881762
#SPJ1