separation of proteins in the first dimension of 2d gel electrophoresis is based on a protein’s molecular weight. T/F

Explanation:

Given:

mass of CuSO4 = 0.3 g

mass of Zn = 0.2 g

Formula:

mass of Cu = mass of CuSO4 - (mass of Zn x (mole mass of Cu / mole mass of Zn))

Calculations:

mass of Cu = 0.3 g - (0.2 g x (63.55 g/mol / 65.39 g/mol))

Answer:

mass of Cu = 0.27 g

Answer:

To calculate the mass of copper produced in this reaction, you need to know the mass of CuSO4 and Zn used and the balanced chemical equation for the reaction. Without this information, I cannot perform the calculation for you.

A substance's hue varies over time: Chemical transformation (Over time, the material is changing into a different chemical.

How can you tell whether a change you witness is chemical or physical?

In a physical change, the substance's shape or appearance changes, but the type of matter it contains stays the same. In contrast, when matter undergoes a chemical transformation, at least one new substance with novel features is created.

Not every change in colour results from a chemical shift. If one were to alter a substance's colour through a non-chemical interaction, such as painting an automobile, the alteration would be physical rather than chemical. This is due to the fact that the car's makeup has not changed.

To know more about chemical change visit:

https://brainly.com/question/2591189

#SPJ4

When oil from a tin is poured through a funnel placed tightly into the neck of a bottle, the oil stays in the funnel because the air pressure inside the bottle prevents the oil from entering the bottle.

The force that air, whether compressed or unconfined, applies to whatever surface it comes into touch with is known as air pressure.

The air in the bottles exerts a force on the liquid that is to be poured inside it.

Since the air has no way of escaping, the oil cannot be poured into the bottle.

However, if a little space is allowed by the funnel for the air to escape, the liquid can then be poured into the bottle.

Learn more about air pressure at: https://brainly.com/question/12870338

#SPJ1

A battery is a device that converts chemical energy to electric energy.

Battery acid does not have a set formula, but it is commonly only made of sulphuric acid (H2SO4) and water (H2O), with a concentration of 4-5 mol/L and an approximate pH level of 0.8. Lead-acid batteries utilise sulfuric acid.

An instrument that stores energy stored and transforms it into electrical energy is a battery. Electrons move from one materials (electrode) to another through an external circuit throughout chemical reactions in batteries. An electric current can be generated by the flow of electrons and utilized to perform tasks.

Principal cells or nonrechargeable batteries. rechargeable batteries or backup cells. batteries depending to use. Calcium ion battery (zinc manganese oxide, carbon) Air and aluminium battery.

Learn more about electric energy here:

brainly.com/question/81250

#SPJ4

The number of atoms of carbon in 684 g of sucrose is 24 atoms.

To calculate the number of atoms of carbon in 684 g of sucrose (C12H22O11), we must first calculate the quantity of moles.

Sucrose has a molar mass of 342 g/mol, so 684 g of sucrose would be 684/342 = 2 moles. Since sucrose has 12 atoms of carbon per molecule, there would be 2 x 12 = 24 atoms of carbon in 684 g of sucrose.

Molar mass is the mass of one mole of a substance, expressed in grams per mole (g/mol). It is equal to the sum of the atomic masses of all the atoms in one mole of the substance, and is used to calculate the mass of a given number of moles of a substance.

Learn more about sucrose c12h22o11:

https://brainly.com/question/24130125

#SPJ4

Isotopes are forms of an element and has the same quantity of protons and electrons but differing numbers of neutrons.

Isotopes are atoms of the same oxidation state but differing numbers of neutrons. They differ in mass, which affects their physical characteristics even if they have almost identical chemical makeup.

Atoms that belong about the same chemical and share an atoms Z but a distinct mass number A are known as isotopes. For instance, three isotope of the element carbon, having respective masses of 12, 13, and 14, are carbon-12, carbon-13, and carbon-14.

To know more about Isotopes visit :

https://brainly.com/question/21536220

#SPJ4

A third order reaction's rate constant has the units M-3/s.

A third order reaction's rate constant (k) is measured in units of M-3/s. The rate of a third order reaction is inversely proportional to the concentration of one or more of the reactants, expressed as a cube.

The rate of reaction for a third order reaction can be written as:

Where [A] is the reactant A concentration and k is the rate constant, the equation is -d[A]/dt = k[A]3.

The units of the rate constant for a third order reaction are M-3/s, which represent the fact that the rate of the reaction depends on the cube of the reactant concentration.

Given the concentrations of the reactants, the rate constant can be used to calculate the rate of reaction at a specific temperature and pressure.

To know more about order reaction, visit:

https://brainly.com/question/12446045

#SPJ4

A pair of electrons would have more electric potential energy when they are close together than when they are far apart.

The system's potential energy grows when two like charges—two protons or two electrons—are brought adjacent to one another. A proton and an electron, which are two different charges, are moved towards one another, the electric potential energy of the system diminishes.

Due to the same negative charge, a repulsive force is generated between two electrons as they approach one another. So, a battle is waged against this repellent energy in an attempt to bring them closer. Electrostatic potential energy is used to store this work.

Learn more about electrons here:

brainly.com/question/6283462

#SPJ4

Bonding and the development of trusting relationships are facilitated by the chemical release of oxytocin.

Your brain releases oxytocin, referred to as the "bonding hormone," when you hug someone or engage in other nonsexual touching. By doing this, stress hormones like cortisol and norepinephrine are decreased while the release of additional feel-good hormones like dopamine and serotonin is stimulated.

Chemical bonds, for instance, hold the carbon atom and the two oxygen atoms together in the carbon dioxide (CO2) molecule. Ions bonded together by a chemical bond make up salts, which are substances. For instance, in a crystal of NaCl, table salt, a chemical link holds Na+ and Cl- together.

To know more about oxytocin visit :-

https://brainly.com/question/1996049

#SPJ4

The molal boiling point of a solution of ethylene glycol and water is 100.052 °C.

number of mol of ethylene glycol = (given mass)/(molar mass)

= 124.14/62.07

= 2.000 mole

mass of water = 2000 g

= 2.000 kg

molality = (number of mol of ethylene glycol)/(mass of water in Kg)

= 2.000/2.000

= 1.000 m

ΔTb = Kb*m

Tb - 100 = 0.052*1.000

Tb - 100 = 0.052

Tb = 100.052  °C

Molal boiling-point elevation is a term used in thermodynamics and refers to the change in boiling point of a solvent due to the addition of a non-volatile solute. The molal boiling-point elevation is proportional to the molality (number of moles of solute per kilogram of solvent) of the solution and is an important colligative property, which means it depends only on the concentration of solute particles and not on their identity.

The molal boiling-point elevation can be calculated using the equation ΔTb = Kb × m, where ΔTb is the change in boiling point, Kb is the molal boiling-point elevation constant, and m is the molality of the solution. The value of Kb is different for each solvent and is used to quantify the effect of the solute on the boiling point of the solvent.

Molal boiling-point elevation has several important applications, including the purification of liquids by fractional distillation, the determination of the concentration of dissolved substances, and the production of high-purity solvents. It is also used in the food and pharmaceutical industries, where the boiling point of solutions is often used as a quality control criterion.

To learn more about Molal boiling-point visit here:

brainly.com/question/8348157

#SPJ4

H2SO4 is our limiting reactant, and moles of H2SO4 will dictate the maximum amount of product that can be formed.

The correctly balanced equation for the reaction:
H2SO4(aq) + 2NaOH(s) ==> Na2SO4(aq) + 2H2O(l)

To find the limiting reactant. Divide moles of each reactant by the corresponding coefficient in a balanced equation and see which is less

For H2SO4: 29 g H2SO4 x 1 mol H2SO4/98 g = 0.294 mols (÷1->0.294)
For NaOH: 12 g NaOH x 1 mol NaOH / 40. g = 0.3 mols (÷2->0.15)

Since 0.294 is less than 0.15, H2SO4 is our limiting reactant, and moles of H2SO4 will dictate the maximum amount of product that can be formed
If the reaction finishes, there can be no more than zero grams of H2SO4 left over. There shouldn't be any left-over since it will run out before the NaOH is consumed.

To learn more about limiting reactants please visit -
https://brainly.com/question/24162926
#SPJ4

You would need 0.5 mL of the 0.1 M NaOH stock solution to prepare 5 mL of 0.01 M NaOH.

When preparing a solution of a specific concentration, it is often necessary to dilute a stock solution with a higher concentration to obtain the desired outcome. This can be achieved using the equation C1 * V1 = C2 * V2, where C represents the concentration and V represents the volume. The equation states that the product of the initial concentration (C1) and volume (V1) of a solution is equal to the product of the final concentration (C2) and volume (V2). To find the volume of stock solution required to prepare a specific volume of a desired concentration, the equation can be rearranged to solve for V1: V1 = (C2 * V2) / C1. By plugging in the known values of C2 and V2, and the known concentration of the stock solution (C1), the volume of stock solution required can be easily calculated. In the example of preparing 5 mL of 0.01 M NaOH from a 0.1 M stock solution, V1 was found to be 0.5 mL.

To know more about the preparation of the stock solution, visit:https://brainly.com/question/14667249

#SPJ4

Combustion is a chemical process in which a carbon-hydrogen molecule reacts with oxygen to produce carbon dioxide and water.

Carbon dioxide (CO2) is produced by both natural (such as volcanoes, animal breath, and plant degradation) and anthropogenic factors (primarily the burning of fossils fuels like coal, oil and natural gas to generate energy).

Inhaling CO2 is thought to be only mildly harmful. The fundamental health impacts of CO2 are a result of its basic asphyxiant nature. A gas that decreases or replaces the natural oxygen in breathing oxygen is referred to as a simple asphyxiant. Mild CO2 exposure symptoms might include headache and sleepiness.

To know more about Carbon-Dioxide visit :

https://brainly.com/question/3049557

#SPJ4

3 moles⋅22.4 L/1 mole=67.2 L Likewise, 0.5 moles of gas will occupy half the volume 1 mole occupies 0.5 moles⋅22.4 L/1 mole = 11.2 L

Standard Temperature and Pressure conditions imply a temperature of 273.15 K and a pressure of 1 atm. When these conditions are met, 1 mole of any ideal gas occupies exactly 22.4 L. Keep in mind that ideal gas particles are assumed to have no volume of their own, that's why, for example, at STP 1 mole of helium gas will occupy the same volume as, say, 1 mole of chlorine gas.

However, as you can see in the picture, the two gases will have different masses because of the difference in their molar mass. The balloon filled with helium will weigh less than the one filled with chlorine, despite the fact that they occupy the same volume.

So, if 1 mole occupies 22.4 L, the immediate conclusion is that a bigger number of moles will occupy more than 22.4 L, and a smaller number of moles will occupy less than 22.4 L.

In your case, 3 moles of gas will occupy 3 times more volume than 1 mole of gas.

3 moles⋅ 22.4 L/1 mole=67.2 L

Likewise, 0.5 moles will occupy half the volume 1 mole occupies

0.5 moles⋅ 22.4 L/1 mole=11.2 L

Learn more about gas here: https://brainly.com/question/29197891

#SPJ4

we get T1*V1γ-1 = T2*V2γ-1, which gives T2/T1 = 2γ-1 = 1.25, which gives T2 = 1.25*T1, therefore temperature increases by a factor of 1.25

The ratio of a gas's specific heat at a constant pressure to that of the gas's specific heat at a constant volume is known as the specific heat ratio of a gas, which is symbolized as gamma " but also known as "k."

Calculation-

in an adiabatic process

PVγ = constant

therefore      P1*V1γ  = P2*V2γ  

here we have in part a    that    V2 = 0.5*V1   and  P2 = 2.5*P1

putting in the values   we get, 2γ = 2.5 which on solving we get

γ = 1.3219

now part b, we can use                  

TVγ-1 = constant, therefore here we have

T1 = initial temperature, T2 = final temperature

and V2 = 0.5*V1

on putting in the values we get,

T1*V1γ-1 = T2*V2γ-1

which gives  

T2/T1 = 2γ-1 = 1.25      which gives    T2 = 1.25*T1

therefore,

temperature increases by a factor of 1.25

To know more about specific heat visit:

https://brainly.com/question/11297584

#SPJ4

C) NH₄NO₃. The NH₄NO₃ is a  strong electrolyte from the given options. A powerful electrolyte is sodium chloride.

When dissolved in water, chemicals known as electrolytes acquire a natural positive or negative electrical charge. They support a variety of bodily functions, including maintaining the harmony of fluids within and outside of your cells and regulating chemical processes.

An electrolyte is a substance that produces ions when dissolved in a solution, such as water, according to a chemical professor's definition of the term. Since these ions contain an electrical charge that is either positive or negative, we refer to these substances as electrolytes.

The important electrolytes are sodium, potassium, chloride, magnesium, calcium, phosphate, and bicarbonate. Our food and beverages include electrolytes.

To know more about electrolytes visit;

https://brainly.com/question/17089766

#SPJ4

13.74 gm of a 0.500 m solution of sodium acetate, in water would you use to obtain 0.170 mol of sodium acetate.

To calculate the mass of sodium acetate in a 0.500 m solution, use the following equation:-

= Mass (g)

= Molarity (m) x Volume (L) x Molecular Weight (g/mol).

For sodium acetate, the molecular weight is 82.03 g/mol. Therefore, the mass of sodium acetate in a 0.500 m solution is:

= Mass (g)

= 0.500 m x 0.500 L x 82.03 g/mol

= 20.51 g

To obtain 0.170 mol of sodium acetate, use the following equation:-

= Moles (mol)

= Mass (g) / Molecular Weight (g/mol).

Therefore, the mass of sodium acetate required to obtain 0.170 mol is:

= Mass (g)

= 0.170 mol x 82.03 g/mol

= 13.74 g

To know more about solution please refer: https://brainly.com/question/15757469

#SPJ4

During the extraction and separation of hexanol, the organic layer will be on top in the separatory funnel.

The organic layer will be on top because hexanol is more soluble in organic solvents than in water. 1-hexanol is an organic alcohol with a six-carbon chain and the condensed structural formula CH3(CH2)5OH. A separatory funnel is a piece of scientific equipment used in liquid-liquid extractions to divide a mixture's components into two immiscible solvent phases of different densities. It is also referred to as a separation funnel, separating funnel, or simply a sep funnel. In a typical reaction, the two phases are generally an aqueous phase and a lipophilic organic solvent, such as ether, MTBE, dichloromethane, chloroform, or ethyl acetate.

learn more about Hexanol Refer:brainly.com/question/13052659

#SPJ4

The energy of both the changes in the system when a chemical shift takes place. The given process is a chemical change.

An alteration of one or more compounds within one or more new and distinct substances is referred to as a chemical change or chemical reaction. In other terms, a chemical reactions is indeed an atomic rearrangement-based chemical process.

A chemical change normally cannot be reversed unless through additional chemical processes, although a physical change may frequently be done so. The energy of both the changes in the system when a chemical shift takes place. The given process is a chemical change.

Therefore, the given process is chemical change.

To know more about chemical change, here:

https://brainly.com/question/29760166

#SPJ1

Mole is one of the International System of Units' seven foundation units (SI). Therefore, the moles of  H[tex]_2[/tex] is  7.6 moles.

A mole is just a measuring scale. In reality, it's one of the International System of Units' seven foundation units (SI). When already-existing units are insufficient, new ones are created.

The levels at which chemical reactions frequently occur exclude the use of grams, yet utilizing actual numbers of atoms, molecules, or ions would also be unclear. To fill this gap between extremely small and extremely huge numbers, scientists created the mole.

Zn + HCl [tex]\rightarrow[/tex] ZnCl[tex]_2[/tex] + H[tex]_2[/tex]

moles of HCl = 7.6 moles

the mole ratio between HCl and  H[tex]_2[/tex] is 1:1

moles of H[tex]_2[/tex] = 7.6 moles

Therefore, the moles of  H[tex]_2[/tex] is  7.6 moles.

To learn more about mole, here:

https://brainly.com/question/15209553

#SPJ1

The solution of 0.00058 M calcium hydroxide is basic as it is a base and pH of it is 12.

According to the Arrhenius concept, base is defined as a substance which yields hydroxyl ions on dissociation.These ions react with the hydrogen ions of acids to produce salt in an acid-base reaction.

Bases have a pH higher than seven as they yield hydroxyl ions on dissociation.They are soapy in touch and have a bitter taste.According to the Lowry-Bronsted concept, base is defined as a substance which accepts protons .Base react violently with acids to produce salts .Aqueous solutions of bases can be used to conduct electricity .They can also be used as indicators in acid-base titrations.

Learn more about base,here:

https://brainly.com/question/13773045

#SPJ1

Crystallization is primarily employed as a separation technique in order to obtain pure crystals of a substance from an impure mixture

Crystallization from solution is a separation approach where a solid phase is separated from the mother liquor. In disparity with other separation procedures, however, the dispersed phase consisting of numerous solid particles also forms the final product, which has to meet the needed product specifications.

Crystallization is used to separate a soluble material from a solvent. For example, crystallization can be used to separate salt from a salt solution. We begin with a soluble solid melt in a solvent.

So we can conclude that Crystallization is a powerful and adaptable technique to separate components from a liquid mixture.

Learn more about Crystallization here: https://brainly.com/question/5520192

#SPJ1

A decrease in free hydrogen ion concentration (H⁺) in the serum results in an increase in serum pH, and an increase in serum alkalinity.

A hydrogen ion is an ion that is created when a hydrogen (H) atom either loses or gains an electron. The concentration of this ion would affect the pH of the aqueous solution that it is in; as the concentration increase, the pH would decrease.

While a base provides hydroxide ions (OH⁻) that will combine with hydrogen ions to reduce their concentration (which results in a raising pH), an acid will simply increase the H⁺ concentration, usually by having one of its hydrogen atoms dissociate.

Learn more about acid and base at https://brainly.com/question/9836972

#SPJ4

Consequently, the gas's new volume will be 2.5 L. 40 atm of pressure is increased,

if the pressure is reduced to 40 atm.

The relationship between pressure, volume, and temperature is described by the Ideal Gas Law,

which states that PV = nRT,

where P is pressure,

V is volume,

n is the number of moles of gas,

R is the gas constant, and

T is temperature.

To determine the new volume, you would need to know the values of n, R, and T, in addition to the new pressure.

The gas's starting pressure is P1 = 10 atm

The gas's ultimate pressure, P2, is 40 atm.

The gas's initial volume, V1, is equal to 10 L.

Replace the volume and pressure numbers in equation (1);

(40 atm) V2 = (10 atm) (10 L)

V₂ = 100/4

V₂ = 2.5 L

For such more question on Ideal Gas Law

https://brainly.com/question/27870704

#SPJ4

The most prevalent component in the universe, hydrogen, has radioactive materials called deuterium and tritium. All hydride isotopes have one proton, while hydride also has one neutron, and tritium has two.

What uses does deuterium have? Deuterium is frequently used in experimental nuclear fusion, and it has factory, scientific, and industrial uses. It serves as a tracer in nuclear integration reactors and slows it down nuclear reactions in heavy water mediated fission reactors.

A hydrogen isotope with atomic weight is deuterium. Hydride has a greater density than hydrogen. Tiny amounts of high water intake are safe.

To know more about deuterium visit:

https://brainly.com/question/3845553

#SPJ4

The mole fraction of 13.2g of CH₄ in the given problem when dissolved in 52.4g of C₂H₆O is 0.42.

Mole fraction of CH₄ in C₂H₆O  can be calculated in three steps:

1. The masses of CH₄ and C₂H₆Oneed to be converted into moles:

The mass of CH₄= 16.04g/mol

Therefore, the moles of CH₄ present in 13.2g = 13.2/16.04 moles = 0.82 moles.

The mass of C₂H₆O = 46.07 g/mol

Therefore, the moles of C₂H₆O present in 52.4g = 52.4/46.07 = 1.14 moles.

2. The total number of moles of solutes need to be calculated next,

Moles of CH₄+ Moles of C₂H₆O = 0.82 + 1.14 moles = 1.96 moles.

3. The last step is to divide the moles of CH₄by the total moles of solute = 0.82/1.96 = 0.42 moles.

Learn more about mole fraction here brainly.com/question/29905133

#SPJ4

The compound's systematic name are :

1) CH₃ - CH₂ - CH - CH₃    =   2 - amino butane

                        |

                      NH₂

2) CH₃ - CH₂ - CH - CH₃   =  2 chloro butane

                        |

                       Cl

The compound's systematic name are as follows :

The IUPAC naming also called as the systematic naming. There are some rules to name the compounds :

1) CH₃ - CH₂ - CH - CH₃      

                        |

                      NH₂

This compound named as = 2 - amino butane

2) CH₃ - CH₂ - CH - CH₃  

                        |

                       Cl

This compound named as = 2 chloro butane

To learn more about systematic name here

https://brainly.com/question/28907449

#SPJ4

Answer:

Explanation:

Electroplating is the process of depositing a thin layer of one metal onto the surface of another metal or conductive material by means of an electrochemical reaction. In the case of silver electroplating, the following half reactions occur at the anode and cathode:

Anode (Oxidation): Ag(s) -> Ag+ (aq) + e-

Cathode (Reduction): Ag+ (aq) + e- -> Ag(s)

At the anode, silver atoms dissolve into the solution, releasing electrons and forming silver ions (Ag+). At the cathode, the silver ions gain electrons and precipitate out as solid silver atoms, which deposit onto the surface of the object being plated. This process continues until the desired thickness of silver has been deposited.

The anode and cathode are separated by a conductive material, typically an electrolyte solution, and a direct electrical current is applied to the system. The electrical current drives the reaction at the anode and cathode, with the electrons flowing from the anode to the cathode through the electrical circuit, allowing the silver ions to travel from the anode to the cathode, where they deposit as solid silver.

The sample contained 0.0777 moles of water, as indicated by the question.

Chemists employ the mole, a very significant unit of measurement. Like a dozen eggs means twelve eggs, having a mole of anything indicates we have 602,214,076,000,000,000,000,000 of such a thing. For extremely small objects such as atoms, molecules, or other particles, chemists must quantify using moles.

the amount of water lost while heating.

mass of water = original mass - anhydrous salt residue

mass of water = 3.5 g - 2.1 g

mass of water = 1.4 g

molar mass of water (18.015 g/mol).

moles (n) of water = mass / molar mass

moles of water = 1.4 g / 18.015 g/mol

moles of water = 0.0777 moles

To know more about mole visit :

https://brainly.com/question/19964502

#SPJ4

When a solute is added to a pure solvent the freezing point decreases as the boiling point increases.

The temperature at which a substance's liquid and solid forms have the same vapour pressure is known as its freezing point. Vapour pressure decreases as soon as a solute is added to the solvent. As a result, the temperature where the vapour pressure of the solid and liquid phases is equal is likewise decreased, and the freezing point is lowered as a result.

The temperature at which air pressure and vapour pressure are equal is known as the boiling point. Because there are fewer water molecules on the surface of the salt solution, fewer water molecules evaporate, resulting in lower vapour pressure. Therefore, a greater temperature was required to reach atmospheric pressure, consequently, the boiling point rises.

When something is frozen, it solidifies. Ice is made of water, compared to liquids, particles in solids are significantly closer to one another. To produce ice crystals, the water molecules must expend energy and get very near to one another (closely packed).

Learn more about Freezing Point:

https://brainly.com/question/29577305

#SPJ4