covalent bonding occurs in both molecular and covalent-network solids. These two kinds of solids differ so greatly in their hardness and melting points because In molecular solids, the molecules are held in place by relatively weak intermolecular forces, and these forces can be broken with little energy.
Atoms that are covalently bound together to form a three-dimensional network or layers of two-dimensional networks make up covalent network solids. Covalent network solids have high melting points as a result of the strength of the covalent bonds.
Intermolecular forces, as opposed to intramolecular forces, such as the covalent bonds that bind atoms in molecules and polyatomic ions, keep molecules in a liquid or solid together. Covalent network solids are typically substantially stronger than intermolecular forces.
To learn more about Covalent network solids please visit - https://brainly.com/question/29240812
#SPJ4
The reaction of 2,2-dimethyl-1-propanol with HBr is very slow and gives 2-bromo-2-methylbutane as the major product. Give a mechanistic explanation for these observations.
A carbocation rearrangement with a methyl shift is the outcome of the process.
Methyl shift is the transfer of a methyl group from one charged carbon atom in a molecule to a nearby, uncharged carbon atom. If the changing chemical species is a methyl group, we refer to this as a methyl shift, albeit it might also be any other potential alkyl group.
These are the steps of reaction of 2,2-dimethyl-1-propanol with HBr
1) 2,2-dimethyl-1-propanol is protonated in the first step.
2) The removal of [tex]H_{2} O[/tex] results in the formation of a carbo cationic intermediate in the second step.
3) the methyl group is shifted to produce a more stable carbo cationic intermediate.
4) Br-Br-attacks the stable carbocation to produce 2-bromo-2-methylbutane.
To know more about carbocation:-
brainly.com/question/11486868
#SPJ4
A 0.500 g impure sample of LiNO3 is heated, causing it to decompose according to the following equation: 4LINO3(s) — Li,O(s) + 4NO2(g) + O2(g) The gases produced are collected over water at 27°C and 1.00 atm external pressure, and occupy a volume of 55.2 mL. Calculate the partial pressure of O, in the mixture? What is the percentage of LINO3 in the sample? The partial pressure of water is 26.7 mm Hg at 27°C.
The partial pressure of O2 and the percentage of LiNO3 in an impure sample after undergoing a decomposition reaction can be determined through the following steps:
Find the number of moles of gas produced: The volume of the gas mixture and its temperature are used to find the number of moles of gas using the ideal gas law.
Determine the partial pressure of O2: The number of moles of O2 produced is used in the ideal gas law to find its partial pressure.
Find the total pressure: The partial pressures of O2, NO2, and water are added to find the total pressure of the gas mixture.
Determine the percentage of LiNO3: The mass of LiNO3 in the original sample is calculated based on the number of moles of gas produced and its molar mass, and then divided by the total mass of the original sample to find the percentage of LiNO3.
The final answer is the partial pressure of O2 is 0.452 atm and the percentage of LiNO3 in the original sample is 43.5%.
To learn more about partial pressure please click on below link
https://brainly.com/question/15075781
#SPJ4
Which of the following sets of conditions is true for an exothermic reaction that is spontaneous at all temperatures?
∆H < 0 , ∆S < 0 , ∆G < 0
∆H > 0 , ∆S < 0 , ∆G < 0
∆H < 0 , ∆S < 0 , ∆G > 0
∆H > 0 , ∆S < 0 , ∆G < 0
∆H < 0 , ∆S > 0 , ∆G < 0
Option (a) is correct, ∆H < 0, ∆S < 0, ∆G < 0, sets of conditions is true for an exothermic reaction that is spontaneous at all temperatures.
An exothermic reaction that is spontaneous at all temperatures must satisfy the following criteria:
∆H < 0 (negative change in enthalpy, indicating that heat is being released)
∆S < 0 (negative change in entropy, indicating that the system is becoming more ordered)
∆G < 0 (negative change in Gibbs free energy, indicating that the reaction is spontaneous)
Based on these criteria, the correct set of conditions is:
∆H < 0 , ∆S < 0 , ∆G < 0
In other words, for an exothermic reaction to be spontaneous at all temperatures, it must release heat, increase order, and have a negative Gibbs free energy change. This indicates that the reaction can occur without any input of energy, and will naturally proceed in the direction of lower free energy.
To know more about reaction please refer: https://brainly.com/question/4482869
#SPJ4
Question - Which of the following sets of conditions is true for an exothermic reaction that is spontaneous at all temperatures? Choose the correct option among the following.
(a) ∆H < 0 , ∆S < 0 , ∆G < 0
(b) ∆H > 0 , ∆S < 0 , ∆G < 0
(c) ∆H < 0 , ∆S < 0 , ∆G > 0
(d) ∆H > 0 , ∆S < 0 , ∆G < 0
(e) ∆H < 0 , ∆S > 0 , ∆G < 0
If your front lawn is 21.0*20.0 lawn each square foot accumulate 1150 snowflakes how much snow per snow in kg accumulates the lawn per hour. Assume the snowflake mass is 1.90
equal volumes and concentrations of hydrochloric acid and ethanoic acid are titrated with sodium hydroxide solutions of the same concentration. which statement is correct?
Reaching the equivalent point requires the same amount of sodium hydroxide.
What determines a titration's equivalency point?When the volume of analyte is equal to the concentration of titrant administered, this occurs. With 12.3 mL of 0.2 molL-1 HCl, 30 mL of NaOH are neutralized.
During a titration, what transpires at the equivalence point?When just enough titrant is injected to completely neutralize the analyte solution during titration, this is known as the equivalence point. Molecules of base equal molecular weights of acid at the equivalence point in an acid-base titration, and the solution is made up entirely of salt and water.
To know more about sodium hydroxide visit :-
https://brainly.com/question/29327783
#SPJ4
From the following list of aqueous solutions and water, select the one with the highest boiling point.
A) 1.0 m KNO3
B) 0.75 m NaCl
C) 0.75 m CuCl2
D) 2.0 m C12H22O11 (sucrose)
E) pure water
CuCl2 has the greatest boiling point, according to the question given.
Why does water boil?Boiling point: The temperature at which a liquid's internal pressure equals the external pressure exerted by a liquid's vapour; at this temperature, the addition of heat causes the liquid to turn in its vapour without rising the temperature.
We know that elevation in boiling point = i x Kb x m
therefore,
dTb = i x Kb x m
We are known that water will boil at 100 C.
So,
Tb -100 = i x Kb x m
Tb = 100 + ( I x Kb x m)
now Kb is a constant
Therefore,
Tb is depend on the outcome of I x m.
So,
A) 1 m KN03
KN03 ----> K+ + N03-
two species in the product after dissociation , so i =2
i x m = 2 x 1 = 2
B) 0.75 NaCl
NaCl ---> Na+ + Cl-
i =2
So,
i x m = 2 x 0.75 = 1.5
C) 0.75 m CuCl2
CuCl2 ----> Cu+2 + 2Cl-
i=3
So,
I x m
= 3 x 0.75
= 2.25
D) 2 m sucrose
sucrose is non electrolyte so i=1
i x m = 2 x 1 = 2
E) for pure water
Tb = 100 C
So,
CuCl2 has the highest I x m product.
Hence,
CuCl2 has the highest boiling point
To know more about boiling point visit :
https://brainly.com/question/16945842
#SPJ4
the autoionization of water is represented by the equation above. values of pkw at various temperatures are listed in the table below. based on the information above, which of the following statements is true? (a) the dissociation of water is an exothermic process. (b) the ph of pure water is 7.00 at any temperature. (c) as the temperature increases, the ph of pure water increases. (d) as the temperature increases, the ph of pure water decreases.
The equation above represents the autoionization of water. In the table below, values for pkw at varying temperatures are listed. According to the aforementioned data, b pure water has a pH of 7.00 no matter the temperature.
What is the autoionization process?Autoionization is the process through which an excited atom or molecule voluntarily loses one of the electron cloud, transforming it from an electrical stable position to a singly anionic form and changing its charge from Z to Z + 1.
Are there pH values above or below 7 at the equivalence point?As a result, the pH of the solution is higher than seven at the equivalence point. The cause of the pH's bigger than seven because there are acetate negatively charged ions in solution at the equivalence point, and these anions combine with water to generate hydroxide anions and acetic.
To know more about PH visit :
https://brainly.com/question/29766400
#SPJ4
classify each of the following as a chemical or physical change: group of answer choices boiling oil [ choose ] burning gasoline [ choose ] making ice cubes [ choose ] rusting iron [ choose ] melting lead [ choose ] making ammonia from nitrogen and hydrogen [ choose ] digesting food
The occurrence of the following can be proof that a chemical change shift has occurred: odor changes. The color changes (for example, silver to reddish-brown when iron rusts). temperature or energy change.
Is the rotting and molding of food a physical or chemical change?Rotting is a chemical reaction because it involves an enzymatic process that modifies molecules.
Is burning physically altering?The chemical process of burning. This is due to the fact that during burning, new chemicals are created, such as ash and carbon dioxide (CO2). Melting, freezing, condensing, breaking, crushing, cutting, and bending are a few typical instances of physical transformations.
To know more about chemical change visit :-
https://brainly.com/question/2591189
#SPJ4
The left side of an NMR spectrum is described as _____field, and the right side is described as _____field.
An NMR spectrums' left side is referred to as downfield, and its right side as upfield.
Nuclear magnetic resonance spectroscopy, commonly known as magnetic resonance spectroscopy (MRS) or NMR spectroscopy, is a spectroscopic technique for studying the local magnetic fields surrounding atomic nuclei. The nuclear magnetic resonance (NMR) signal is produced by radio waves excitation of the sample's nuclei and is detected by sensitive radio receivers. The sample is put in a magnetic field. The resonance frequency can be changed by the intramolecular magnetic field of an atom in a molecule, revealing details about the electronic structure and different functional groups of the molecule.NMR spectroscopy is the only method that can reliably identify monomolecular organic molecules in modern organic chemistry because the fields are different or highly specific to particular compounds.
Learn more about NMR spectrum
brainly.com/question/29389817
#SPJ4
a new element has two isotopes, one with a mass of 40.0 amu and the other with a mass of 42.0 amu. the atomic weight is 40.50 g/mol. pick the true statement. select all that apply
Statement A, "the isotope at 42.0 amu is less abundant", is true. This is because atomic weight is calculated using the relative abundances of the isotopes. Since the calculated weight is closer to the 40.0 amu isotope, this means that it must be more abundant.
There are two isotopes of a new element, one of which has a weight of 40.0 amu.A greater amount of the isotope exists at 40.0 amu.The two isotopes of a new element have masses of 40.0 and 42.0 amu, respectively.40.50 g/mol represents the atomic weight.
The mass number of an element's isotope can be calculated in what way?Isotopes are variations of a single atom that only differ in the quantity of neutrons in each one.An element's form is determined by the sum of the protons and neutrons in that element:Protons plus neutrons equal mass number.
To know more about isotopes visit:
https://brainly.com/question/29986126
#SPJ4
several grams of a protein are added to 50 ml of water, and the mixture is stirred vigorously until the protein dissolves. after several days, the mixture appears homogeneous and shows no evidence of a solid. it is transparent to visible light and does not show the tyndall effect. based on these observations, the mixture can be classified as a
The definition of a genuine solution is a homogenous mixture of two or more substances where the particle size of the material dissolved (solute) in the solvent is less than 10-9 m or 1 nm. A solution of simple sugar and water is an example of a true solution.
What is the name of a homogenous liquid mixture where the solute is evenly dissolved and distributed throughout the solvent (e.g., a 5 points colloid compound emulsion solution)?In the process of dissolving a solute in a solvent, a homogenous mixture known as a solution is created.
What kind of mixture can be homogenized?a combination of two or more materials that is homogenous. example: a water, sugar, and flavor combination (Coke). Not chemically or chemically connected, the substances are only physically combined.
To know more about homogenous mixture visit :-
https://brainly.com/question/12468683
#SPJ4
Which of the following forms a molecular solid?
a. CaO
b. C10H22
c. C (graphite)
d. gold
C. C (graphite) forms a molecular solid.
Solids can be technically categorized as ionic, molecular, covalent (network), or metallic based on the type of forces holding the constituent atoms, molecules, or ions together. These four different types of interactions have a wide range of relative strengths that correlate well with those differences.
Atoms or molecules bound together by hydrogen bonds, London dispersion forces, or dipole-dipole forces make form molecular solids. characterized by weak conductivity, flexibility, and low melting points. Sucrose is a kind of molecular solid.
As a crystalline solid, graphite is composed of carbon atoms arranged in a regular hexagonal framework. The layers of graphite are made up of rings of six carbon atoms that are organized in horizontal sheets with large gaps between them. Thus, graphite forms a molecular solid in chemistry.
Learn more about molecular solid here https://brainly.com/question/15241125
#SPJ4
hydrogen bonds; dispersion forces
There are two equations used to calculate the heat gained/lost by a substance. Match each equation to its correct application.
A) Heating or cooling within a phase if moles are given
B) Heating or cooling during a phase change
C) Heating or cooling within a phase if mass is given
~q = ms∆T
~q = ns∆T
~q = n∆H°change
If mass is supplied, then q = msT, nsT, or nH°change can be used to determine the heating or cooling within a phase in dispersion forces .
Is a dispersion force produced by hydrogen bonds?Despite being polar, C-H bonds are not extremely polar. The intermolecular dispersion forces would be the most important ones for this material. Hydrogen bonding will occur in this molecule because a H atom is joined to an O atom.
What about London dispersion and dipole-dipole hydrogen bonds?London dispersion forces (LDF), interactions between dipoles, and hydrogen bonds are the three different kinds of intermolecular forces. All substances have LDF at the very least, but molecules may have any combination of these three types of intermolecular interactions.
To know more about dispersion forces visit :-
https://brainly.com/question/14958417
#SPJ4
for the following reaction determine the standard entropy for b(g) if the standard entropy change of the chemical reaction
The standard entropy change for a reaction can be calculated using the sum of the standard entropies of the products minus the sum of the standard entropies of the reactants.
The entropy of a substance is a measure of its thermal energy, with greater entropy indicating a greater degree of disorder or randomness in the distribution of thermal energy. In a chemical reaction, the standard entropy change refers to the change in entropy that occurs when a reaction takes place under standard conditions, typically defined as a temperature of 25°C and a pressure of 1 atm.
To calculate the standard entropy change for a reaction, the standard entropies of the reactants and products must be determined and compared. The sum of the standard entropies of the products minus the sum of the standard entropies of the reactants is equal to the standard entropy change for the reaction.
Here is an example of a reaction with the calculation of its standard entropy change for b(g) species:
2 H2(g) + O2(g) -> 2 H2O(g)The standard entropies of H2, O2 and H2O can be looked up in a thermodynamics table and are, respectively, 130.7 J/mol K, 205.0 J/mol K and 188.8 J/mol K.
Hence:
ΔS° reaction = ΔS° products - ΔS° reactants= (2 * 188.8 J/mol K) - (130.7 J/mol K + 205.0 J/mol K)= 2 * 188.8 J/mol K - 335.7 J/mol K= 377.6 J/mol KSo the standard entropy change for this reaction is 377.6 J/mol K, indicating that the entropy of the system increases during this reaction.
Learn more about standard entropy here: brainly.com/question/29485021
#SPJ4
A Paramecium (unicellular organism) is less complex than a human (multicellular organism) because the Paramecium has Mark only one oval. 0000 one cell instead of many cells. the human has organs. the parameciun does not organ systems. All of the above.
A paramecium (unicellular organism) is less complex than a human (multicellular organism) because it is has all of the above which is a member of kingdom protista.
What is kingdom protista?
Organisms of kingdom Protista are simple eukaryotic organisms which are neither plants nor animals or fungi.These are unicellular organisms but can also exist in the form of colonies.
They live in water or damp terrestrial zones.Some of the organisms of kingdom Protista have cilia or flagella which helps the organism in locomotion.They are autotrophic or heterotrophic in nature.
Learn more about kingdom protista,here:
https://brainly.com/question/15377222
#SPJ1
true/false. taq polymerase was isolated from a thermophile and is used in the polymerase chain reaction (pcr) technique because it does not become inactivated at high temperatures.
It is true that polymerase, which is employed in the polymerase chain reaction (pcr) method, was extracted from a thermophile.
Is it more likely that low temperatures than high ones may cause irreparable harm to bacterial cells?Because irreversible cell damage is more likely to happen at low temperatures than high ones, food is often refrigerated to minimize microbial development. Generally speaking, the ideal temperature is nearer to the minimum than the maximum.
Which statement demonstrates the modifications that hyperthermophilic proteins need to make in order to be active at temperatures higher than 80 °C?In order to stabilize the proteins, hyperthermophiles have more ionic bonds.
To know more about polymerase chain visit :-
https://brainly.com/question/11417541
#SPJ4
what is the effect of removing some water from the system in an equilibrium state given by the equation 2h2o2
Removing some water from a system in an equilibrium state represented by the equation 2H2O2 (hydrogen peroxide) will shift the equilibrium towards the reactant side. The reaction will proceed in the reverse direction to produce more water and hydrogen peroxide until a new equilibrium is reached.
In an equilibrium state, the rate of the forward reaction is equal to the rate of the reverse reaction. The concentration of reactants and products at this point is constant, and any change in the concentration of either species will shift the equilibrium towards the side that will compensate for the change.
In the case of the reaction 2H2O2, removing some water will result in a decrease in the concentration of one of the reactants, which will disrupt the balance of the reaction. To reestablish the balance, the reaction will proceed in the reverse direction to produce more water and hydrogen peroxide, until a new equilibrium is reached. The reaction will continue to adjust until the concentration of reactants and products reaches a new constant value that corresponds to the new equilibrium.
Learn more about equilibrium here:
https://brainly.com/question/29627805
#SPJ4
Using the reagents below, list in order (by letter, no period) those necessary to prepare trans-1,2-dibromocyclopentane from cyclopentane.
Note: Not all spaces provided may be needed. Type "na" in any space where you have no reagent. (There are 3 spaces)
a. Br2, heat, light
b. HBr
c. Br2
d. H2O
e. HBr, HOOH
f. EtOH
g. NaOEt, EtOH, heat
a. Br2, heat, light, g. NaOEt, EtOH, heat, c. Br2 . Three separate processes are necessary to transform the stability cyclopentane into the dibromocyclopentane trans isomer.
What is the purpose of a cyclopentane?The polyurethane foams used to insulate freezers and refrigerators use cyclopentane as a blowing agent.Cyclopentane does not include hydro-fluorocarbons, in contrast to several other materials used to insulation refrigerators (HFCs).
Where can you find cyclopentane?The offering a wide variety ring is present in many valuable medications and other natural compounds.Prostaglandins, most steroids, and a few lipids are examples.
To know more about cyclopentane visit:
https://brainly.com/question/29619573
#SPJ4
A method of analysis yields masses of gold that are low by 0.4 mg. Calculate the percent relative error caused by this result if the mass of gold in the sample is
(a) 500 mg
(b) 250 mg
(c) 150 mg
(d) 70 mg
Please explain the steps
Answer:
The percent relative error caused by a method of analysis that yields masses of gold that are low by 0.4 mg can be calculated as follows:
(a) For a sample with a mass of 500 mg of gold, the percent relative error is 0.08% (0.4/500 * 100).
(b) For a sample with a mass of 250 mg of gold, the percent relative error is 0.16% (0.4/250 * 100).
(c) For a sample with a mass of 150 mg of gold, the percent relative error is 0.27% (0.4/150 * 100).
(d) For a sample with a mass of 70 mg of gold, the percent relative error is 0.57% (0.4/70 * 100).
In each scenario, the percent relative inaccuracy grows as the actual mass of gold diminishes. This is due to the fact that when the real value falls, the same absolute inaccuracy (0.4 mg) becomes a higher proportion of the genuine value.
What is error analysis?In chemistry, an error is defined as the difference between the real (or accepted true) result and the measured result. If the analytical mistake is substantial, severe repercussions may occur. Analytical chemistry is built on dependability, repeatability, and precision.
Here,
To calculate the percent relative error, we use the following formula:
Percent Relative Error = (|observed value - true value| / true value) * 100%
where observed value is the measured value, and true value is the actual value. In this case, the observed value is the mass of gold that is low by 0.4 mg, and the true value is the actual mass of gold.
(a) If the mass of gold in the sample is 500 mg, the observed value is 500 - 0.4 = 499.6 mg, and the percent relative error is:
Percent Relative Error = (|499.6 - 500| / 500) * 100% = (0.4 / 500) * 100% = 0.08%
(b) If the mass of gold in the sample is 250 mg, the observed value is 250 - 0.4 = 249.6 mg, and the percent relative error is:
Percent Relative Error = (|249.6 - 250| / 250) * 100% = (0.4 / 250) * 100% = 0.16%
(c) If the mass of gold in the sample is 150 mg, the observed value is 150 - 0.4 = 149.6 mg, and the percent relative error is:
Percent Relative Error = (|149.6 - 150| / 150) * 100% = (0.4 / 150) * 100% = 0.2667%
(d) If the mass of gold in the sample is 70 mg, the observed value is 70 - 0.4 = 69.6 mg, and the percent relative error is:
Percent Relative Error = (|69.6 - 70| / 70) * 100% = (0.4 / 70) * 100% = 0.5714%
In each case, we can see that as the actual mass of gold decreases, the percent relative error increases. This is because the same absolute error (0.4 mg) becomes a larger fraction of the true value as the true value decreases.
To know more about error analysis,
https://brainly.com/question/13078117
#SPJ1
Calculate the molar mass of a vapor that has a density of 7.125 g/L at 13 °C and 743 torr.
Express the molar mass in grams per mole to three significant digits.
Answer:
Explanation:
Let’s start by converting the given information to the terms necessary: 290* K, .978 atm, 7.125 g/L
To solve this problem, we’re going to use the formula PM=dRT (R always = .0821)
so, (.978)M=(7.125)(.0821)(290)
Divide both sides by .978
M = 173 g/mol (keeping with 3 sig figs)
Write a balanced equation and K₁, expression for the following Brønsted-Lowry base in water:
acetylide ion, HC=C. Include the states of all reactants and products in your equation.
Answer: Hope this helps:
The balanced equation for the reaction of the acetylide ion (HC=C) with water (H2O) as a Brønsted-Lowry base is:
HC=C + H2O → HC(OH)=C
The equilibrium constant (K₁) expression for this reaction can be expressed as follows:
K₁ = [HC(OH)=C] / [HC=C][H2O]
where [ ] represents the concentration of the species in moles per liter (M).
predict whether a reaction occurs, and if so, write on a separate piece of paper the balanced total and net ionic equations (in the field provided you only need to input the sum of the coefficients of the net ionic equation, so enter a whole number, e.g. 0, 1, 2, 3, etc): sodium hydroxide (aq) cadmium(ii) nitrate (aq)
Chemical equations known as ionic equations only display the ions that are active during a process. Alternatively put, the ions that combine in solution to react and create new compounds.
In chemistry, what is the net ionic equation?The chemical equation known as the net ionic equation only displays the atoms, molecules, and ions that are actually contributing to the process.
In ionic form, how would you express an equation?Breaking down all soluble ionic chemicals (those denoted with a (aq)) into their corresponding ions will allow you to write the ionic equation. Every ion needs to be represented with its charge and a (aq) to indicate that it is present in solution. Show the quantity of each ion present using coefficients.
To know more about ionic equations visit :-
https://brainly.com/question/15466794
#SPJ4
Identify all possible types of intermolecular forces that can form between particles of each substance below. (Select all that apply.)
(a) CS2
dipole-dipole interactions
hydrogen bonding interactions
ion-dipole interactions
London dispersion forces
(b) CHCl3
dipole-dipole interactions
hydrogen bonding interactions
ion-dipole interactions
London dispersion forces
(c) Kr
dipole-dipole interactions
hydrogen bonding interactions
ion-dipole interactions
London dispersion forces
(d) HF
dipole-dipole interactions
hydrogen bonding interactions
ion-dipole interactions
London dispersion forces
(e) H2Te
dipole-dipole interactions
hydrogen bonding interactions
ion-dipole interactions
London dispersion forces
CS2 and H2Te have a London dispersion force whereas Chcl3, Kr, and HF have dipole-dipole interaction
H2Te possesses non-polar bonds. As a result, you should disregard it as a dipole and solely take into account van der Waals and London dispersion forces. The C-S bond is nonpolar because of the disparity in electronegativities between C and S. Due to the direction of two bond dipoles in the linear structure of carbon disulfide, the dipole moments are canceled out. Carbon disulfide is hence non-polar.
Any neighboring pair of atoms or molecules will interact when they are present in sufficiently close proximity due to London dispersion forces.
These forces become stronger with increasing polarity for molecules with identical size and mass. Additionally, nonpolar molecules can develop dipoles as a result of polar molecules, producing dipole-dipole interaction
To learn more about the London dispersion force please visit - https://brainly.com/question/20514601
#SPJ4
Predict whether a reaction occurs, and if sO, write on a separate piece of paper the balanced total and net ionic equations (in the field provided you only need to input the sum of the coefficients of the net ionic equation, so enter a whole number; e.g: 0, 1, 2,3,etc): Iron(III) chloride (aq) + cesium phosphate (aq)
The balanced chemical reaction equation demonstrates the reaction that took place.
A reaction occurs when new products are formed. Let us analyse all the reactions mentioned below and see whether they are feasible to occur or not. Feasibility of all the reactions are a very important element to check whether a reaction is possible or not.
FeCl3(aq) + Cs3(PO4) (aq) ------> 3CsCl(aq) + FePO4(aq)
2NaOH(aq) + Cd(NO3)2(aq) -------> 2NaNO3(aq) + Cd(OH)2(s)
MgBr2(aq) + 2CH3COOK(aq) -----> 2KBr(aq) + Mg(CH3COO)2(s)
Ag2SO4(aq) + BaCl2(aq) ---------> BaSO4(s) + 2AgCl
Na2SO4(aq) + Sr(NO3)2(aq) ------> 2NaNO3(aq) + SrSO4(s)
Hence, seeing all the balanced chemical reaction equation demonstrates the reaction has taken place.
Learn more about balanced chemical equations:
brainly.com/question/4146311
#SPJ4
when leadii nitrate solution is added to sodium chloride solution, solid leadii chloride forms and sodium nitrate solution remains. be sure to include the state of each reactant and product in the equation.
The reaction can be represented as follows:
Pb(NO3)2 (aq) + 2 NaCl (aq) → PbCl2 (s) + 2 NaNO3 (aq)
In the given reaction "aq" represents an aqueous solution, meaning the species is dissolved in water. "s" represents a solid state
In this reaction, lead(II) nitrate (Pb(NO3)2) and sodium chloride (NaCl) are both dissolved in water and react to form solid lead(II) chloride (PbCl2) and aqueous sodium nitrate (NaNO3). The reaction can be thought of as the transfer of the nitrate ion (NO3-) from lead(II) nitrate to sodium, forming sodium nitrate, while the chloride ion (Cl-) from sodium chloride forms lead(II) chloride.
The reaction between lead(II) nitrate and sodium chloride is a classic example of a double displacement reaction, also known as a metathesis reaction. In this type of reaction, two ionic species exchange their counterions to form two new ionic species. In this specific reaction, the nitrate ion (NO3-) from lead(II) nitrate is exchanged with the chloride ion (Cl-) from sodium chloride. The result is the formation of lead(II) chloride and sodium nitrate, which are both ionic compounds and have completely dissociated in water to produce their respective ions.
Learn more about metathesis here:
https://brainly.com/question/1554302
#SPJ4
assume you have a proton in an atom, and that proton is surrounded by an electron shell where the charge is evenly distributed across the entire surface of the shell. the proton would feel
A proton in an atom, and that proton is surrounded by an electron shell where the charge is evenly distributed across the entire surface of the shell. the proton would feel protons will feel a huge force of attraction
Atom is the smallest unit of matter that can stand alone or be combined. Inside the atomic nucleus are neurons and protons, and in the shells are sometimes found electrons that are negatively charged which are separated in their respective trajectories or orbits.
Protons are particles that make up atoms that are deep inside the atomic nucleus so that they cannot be disturbed by particles outside the qatom. Therefore the proton is a stable subparticle of the atom. The electrons in the atomic shells orbit the atomic nucleus and form chemical reactions through the coulomb force between electrons and protons so that electrons are bound to atoms.
Learn more electrons at:
https://brainly.com/question/17066934
#SPJ4
positive charge is placed at rest at the center of region of space in which there is uniform; three-dimensiona lectric field _ uniform field is one whose strength and direction are the same at all points within the region. When the positive charge is released from rest in the uniform ectric field; what will its subsequent motion be? It will move at constant speed WIl move at constant velocity. It will move at constant acceleration_ It will move with linearly changing cceleration _ It will remain at rest in its initia position.
A positive charge placed at rest in a uniform electric field will experience a force due to the electric field.
The direction of this force will be opposite to the direction of the electric field and its magnitude will be proportional to the strength of the field and the magnitude of the charge.
Since a uniform electric field has a constant direction and strength at all points, the force on the positive charge will be constant. Therefore, the motion of the positive charge will be a uniformly accelerated motion. This means that the velocity of the positive charge will change at a constant rate, resulting in a constant acceleration.
The positive charge will continue to move in the direction of the electric field with a linearly increasing velocity until it is stopped by some external force or it reaches the edge of the region of space in which the electric field is uniform.
A positive charge placed at rest in a uniform electric field will move with a constant acceleration, resulting in a linearly changing velocity.
Learn more about electric field:
brainly.com/question/15800304
#SPJ4
Show how a dxz atomic orbital and a pz atomic orbital overlap to form a bonding MO, assuming the x-axis is the internuclear axis.
a. Would it result in the formation of a σ- or a π-MO? Explain your rationale.
b. Identify the number of node(s) which is/are perpendicular to the bond axis.
Since the dxz atomic orbital and a pz atomic orbital do not overlap along the axis, they form a pi bond and would us a π-MO having one node
What is a pi bond?A pi bond (π bond) is a type of covalent bond that forms between two atoms by the overlap of their unhybridized p orbitals. Pi bonds are usually found in double and triple bonds between atoms, and they are weaker and less directional than the other type of covalent bond, known as the sigma bond (σ bond).
In a pi bond, the electrons occupy an orbital above and below the plane of the atoms. This creates a region of high electron density between the atoms, which leads to a stronger bond compared to a single bond.
Learn more about pi bond: https://brainly.com/question/14482473?
#SPJ1
Will a precipitate form if a 190.0 mL of 0.0820 M solution of strontium nitrate (Sr(NO3)2) is added to 190.0 mL of 0.0210 M potassium oxalate (K2C2O4)? The Ksp of strontium oxalate is 1.14 x 10^-7.
When 190.0 mL of 0.0820 M strontium nitrate [tex](Sr(NO_3)_2)[/tex] solution is added to 190.0 mL of 0.0210 M potassium oxalate ([tex]K_2C_2O_4[/tex]), a precipitate forms because the reaction between these two solutions produces strontium oxalate, which has a solubility product constant (Ksp) of 1.14 x 10 ⁻⁷.
The reaction between strontium nitrate and potassium oxalate can be represented by the following equation:
[tex]Sr(NO_3)_2 +[/tex] [tex]K_2C_2O_4 =[/tex] [tex]SrC_2O_4 +2KNO_3[/tex]
The solubility product constant (Ksp) is a measure of the maximum concentration of ions in a solution that will remain in the solution and not precipitate. When the ion concentration exceeds the Ksp, a precipitate forms.
The concentration of [tex]Sr^{2+}[/tex] ions in the solution can be calculated by multiplying the volume (380 mL) by the initial concentration (0.0820 M) of strontium nitrate:
[[tex]Sr^{2+}[/tex]] = [tex]\frac{0.0820*380}{1000}[/tex] = 0.0311 M
Since [[tex]Sr^{2+}[/tex] is greater than the Ksp of strontium oxalate (1.14 x 10⁻⁷), a precipitate will form when the two solutions are mixed.
To Learn More About solution Click
https://brainly.com/question/29263728
#SPJ4
for each structure, indicate the number of hydrogen and carbon signals that are found in their respective spectra. assume oh chemical shifts are observed.
This chiral center makes it impossible for a plane or symmetry to exist that would constitute any of it's carbon atoms comparable. Consequently, there are eight different carbons in the molecule.
What does an atom of carbon look like?The basic carbon atoms of a carbon chain are those at every end. For instance, butane has two fundamental carbon atoms in it. A carbon atom that is fused to two additional carbon atoms is known as a secondary atom and is denoted by the symbol 2°. For example, the middle carbon atoms in butane are secondary.
What are the atoms that make up carbon?A carbon atom's nucleus consists of six protons & six neutrons and is surrounded by six electrons. Quantum physics states that the innermost atom valence must be occupied by the initial excited states, whereas the solitons of the next four electrons just partially fill the second standard and 3-second major orbitals.
To know more about carbon atoms visit:
https://brainly.com/question/12022203
#SPJ4