As you speed up while driving through the rain, the angle of the rain relative to the horizontal that you observe from inside the car will become more perpendicular. This is because the raindrops are being deflected by your car's movement, making them appear to be coming straight down.
Why is the angle of rain relative to Horizontal?When you're driving through the rain, the raindrops are initially hitting the windshield of your car at an angle. If you speed up, the velocity of your car increases, and this increases the deflection of the raindrops as they hit your windshield. The result is that the angle at which the raindrops hit the windshield appears to be more perpendicular, making it appear as though the rain is falling straight down. This is simply an optical illusion caused by the increased deflection of the raindrops due to your car's movement.
It's important to note that the actual angle of the rain relative to the horizontal hasn't changed. Rather, it's just the angle that you perceive from inside the car that has changed due to the increased deflection of the raindrops caused by your car's movement.
To know more about relative angle, check out
https://brainly.com/question/18144538
#SPJ4
the hour, minute, and second hands on a clock are 0.25 m, 0.30 m and 0.35 m long, respectively. what are the distances traveled by the tips of the hands in a 30 min interval?
The points of the hour hand, minute hand, and second hand cover 0.087 metres, 1.3 metres, and 85 metres in a 40-minute period, respectively.
How far do the tips of the hands move in a period of 25 minutes?The minute hand's tip completes one full rotation in 60 minutes, as we also know. Thus, it will finish the 25/60th of the circle in 25 minutes. The moved distance is therefore equal to 2r * 25/60 inches, or 11.78 inches.
What is the length? travelled on the hour hand's pointer?The radius of the circle the point creates is equal to the distance it travels. the radius of the circle formed by the tip and the angle that is covered.
To know more about distances visit:-
https://brainly.com/question/11581397
#SPJ4
a wave is traveling at a speed of 5 m/s. it has a frequency of 10hz. what is its angular wave number?
The angular wave number of a wave with a speed of 5 m/s and a frequency of 10 Hz is equal to ω = 2πf/v = 2π (10 Hz) / (5 m/s) = 6.283185 rad/s.
The angular wave number is an important parameter in describing the characteristics of a wave. It is a measure of the number of wave cycles that occur in a given distance, and it is related to the wavelength, frequency, and speed of the wave.
The angular wave number can also be used to calculate the frequency of a wave from its wavelength and speed. This is done by using the equation f = v/2πλ, where f is the frequency, v is the speed of the wave, and λ is the wavelength.
Learn more about angular wave:
https://brainly.com/question/16778512
#SPJ4
a heat transfer of 9.5 x 105 j is required to convert a block of ice at -150c to water at 150c. what was the mass of the block of ice?
The block of ice had a mass of approximately 4.94 kg.
In a system, what is heat transfer?
Any material made up of atoms and molecules can transmit heat through it. There are numerous ways in which the atoms are constantly moving. All matter has heat, or thermal energy, which results from atomic and molecular motion.
With increased molecular mobility, heat energy levels rise. However, when referring to heat transfer, it simply means the procedure by which heat is transferred from a body with a high temperature to one with a low one.
In thermodynamic systems, heat transmission is defined as
A temperature difference between a system and its surroundings causes heat transfer across the system's boundary.
It's odd that the temperature difference is referred to as a "potential."
q = mLf + mLf + mCp(T2 - T1)
where:
q = heat transfer (Joules)
mLf = heat of fusion of ice (Joules/kg)
mLf = 333.5 J/g
m = mass of ice (kg)
Cp = specific heat capacity of water (Joules/kg/°C)
Cp = 4.18 J/g/°C
T1 = initial temperature of ice (-150°C)
T2 = final temperature of water (150°C)
Rearranging the equation for mass:
m = q / (mLf + mLf + mCp(T2 - T1))
Substituting values:
m = 9.5 x 105 J / (333.5 J/g + 333.5 J/g + 4.18 J/g/°C × 300°C)
m = 9.5 x 105 J / (666.9 J/g + 1254.4 J/g)
m = 9.5 x 105 J / 1921.3 J/g
m = 9.5 x 105 J / 1921.3 J/g × (1 kg / 1000 g)
m = 9.5 x 105 J / 1921.3 J/g × (1 kg / 1000 g)
m = 4.94 kg
To know more about heat transfer, check out:
brainly.com/question/11775161
#SPJ4
a racer accelerates from rest at constant acceleration for 2 seconds and travels 25 meters. if they then accelerate at the same constant acceleration for an additional 8 seconds, what is their total distance traveled in meters over the entire 10 seconds?
Distance traveled in a given amount of time is equal to the average speed. utilizing the formula s=ut+21at2s=510+212102s=50+100=150m.
Why do we measure distance, exactly?By understanding how far an object is from us, we may calculate its actual size. It is possible to calculate the space that an object takes up in the sky. The actual size of an object can then be determined by taking into account its distance. The further away something is, the smaller it appears.
What is a meter example?A common metric length from around three feet, 3 inches is called a metre. This proves that in the metric system, a meter is a measuring unit. Objects up to one meter in length include yardsticks, baseball bats, and guitars. Distances in sporting events like run and swimming are also measured in meters.
To know more about average visit:
https://brainly.com/question/12322912
#SPJ4
Electric potential is the amount of potential energy per unit of charge
Explanation:
Yes, that is correct. Electric potential is a measure of the electric potential energy per unit of electric charge at a certain point in an electric field. It is often denoted by the symbol V and is measured in volts (V).
PLEASE HELP Red tape can be used to repair a broken tail light on a car. In one or two sentences explain how different colors of light are transmitted, reflected and absorbed by this kind of tape.
Answer:
When sunlight shines through an orange solution, the violet, blue and green wavelengths are absorbed. The other colors pass through. The transmitted light is the light we see, and it looks orange. Colored objects look the way they do because of reflected light.
Explanation:
7. A 100 kg log is dragged across a horizontal siand of concrete. 7.1 Show by calculation that the weight of the log is 980 N. Use the equation w = mg in which g = 9,8 m.s-2. (Refer back to Unit 6 on page 30.)
The weight of the log is 980N
What is the Weight of an object?
The force of gravity acting on an object is its weight, which is equal to its mass times the acceleration of gravity, or w = mg. The newton is the SI unit for weight since it is a force.
The weight of a 100 kg log can be calculated using the equation w = mg,
where m is the mass of the log (100 kg) and g is the acceleration due to gravity (9.8 m/s^2).
So, w = (100 kg)(9.8 m/s^2) = 980 N.
Read more about mass and weight here:
https://brainly.com/question/1100162
#SPJ1
two rectangular tanks contain air that have a constant temperature and are connected by a single valve. one tank is holding moist air, while the other is holding dry air. once the valve is opened, what is most likely to happen?The two air masses will remain stationary and not mix. The two air masses will mix until an equilibrium is reached The moist air will become even more moist, and the dry air will become even more dry None of the answers are correct
The right response is That dry air will get drier and the moisture will get even more moist.
What are masses in maths?Mass is a physical quantity. This unit of mass measuring is an object's weight. It is measurable in conventional mass units such milligrams, kilograms, and pounds. Although smaller things are measured in grams, the kilogram is the actual SI mass unit.
What is mass in physics with example?The best way to grasp mass is the amount of matter that any item or body is made of. There is mass in everything we are able to see. A table, a chair, your bed, the ball, a cup, or even air are examples of items with mass. Everything is therefore either lighter or heavy.
To know more about masses visit:
brainly.com/question/17067547
#SPJ4
What property can be measured without changing the substance?
A substance's physical property is indeed a quality that can be seen or quantified without affecting the substance's identity. Color, density, toughness, boiling and melting points are examples of physical qualities.
What characteristics may be evaluated without modifying the substance?Physical characteristics are characteristics that may be seen or quantified without modifying the makeup of the substance. Some examples include the freezing, melting, and boiling points as well as color, hardness, and fragrance.
What characteristics may be identified without altering the nature of the substance?Physical qualities are those that can be ascertained about a substance without altering its makeup. Physical qualities include traits like critical temperature, boiling point, density, reactivity, color, odor, etc.
To know more about Physical Property visit:
https://brainly.com/question/10786126
#SPJ4
why was class 6 called moon rocks, what do moon rocks have to do with a module called exposure and risk?
Moon rocks have to do with a module called exposure and risk because even if the substance is hazardous, if we're not exposed, we're not at risk.
The measurement of potential future loss resulting from a certain event or business action is known as risk and exposure, and it can be computed as the probability of the event multiplied by the predicted loss as a result of the risk impact.
Risk analysis includes the estimation of the probability that a specific incident will cause the company to suffer a loss. Therefore, it is crucial for management to comprehend, estimate, and take the appropriate actions to avoid or mitigate that risk.
Learn more about risk and exposure
brainly.com/question/30244262
#SPJ4
I've been stuck on this for a while now, could I get some help?
Let asteroid A have a mass of 7.86 x 1011 kg and asteroid B have a mass of 1.12 x 109 kg. If there is a gravitational attraction of 4.54 x 102 N between them, how far apart are their centers of mass?
A. 1.14 x 10-4 m
B. 1.14 x 104 m
C. 1.29 x 108 m
D. 1.29 x 10-8 m
The distance between the masses is 1.14 x 10⁴ m.
option B.
What is the distance between the masses?The distance between the masses is calculated by applying Newton's law of universal gravitation.
Fg = Gm₁m₂ / R²
where;
G is universal gravitation constantR is the distance between the planetsm₁ is the mass of the first objectm₂ is the mass of the second objectR² = ( Gm₁m₂ ) / ( F )
R = √ [ ( Gm₁m₂ ) / ( F ) ]
R = √ [ ( 6.67 x 10⁻¹¹ x 7.86 x 10¹¹ x 1.12 x 10⁹ ) / ( 4.54 x 10² ) ]
R = 1.14 x 10⁴ m
Learn more about gravitational force here: https://brainly.com/question/27943482
#SPJ1
a cube that measures 2 cm on each side has a surface area to volume ratio of
Size and SA:V are inversely related for a certain form. The ratio of a cube with sides of 2 cm is 3 cm1, which is half of a cube with sides of 1 cm.
In mathematics, what is the surface area?The area is the area occupied by a this double flat surface. It has a square unit of measurement. A three-dimensional object's surface area is the area occupied by its outside surface.
Describe surface area with an example.A 3D object's surface is the entire area that all of its faces cover. For instance, the surface area of a cube is its amount if we wish to determine how much paint is needed to paint it. It is consistently expressed in square units.
To know more about surface area visit:
https://brainly.com/question/16415229
#SPJ4
at the instant of take-off, a long jumper has a horizontal velocity of 9.47 m/s and a vertical velocity of 3.21 m/s. find the angle of take-off (relative to the horizontal) and the magnitude of the resultant velocity vector.
The angle of take-off relative to the horizontal is 70.97 ° and the magnitude of the resultant velocity vector is 9.99 m/s.
The horizontal velocity = 9.47 m/s
The vertical velocity = 3.21 m/s
The resultant velocity is expressed by using Pythagoras as follows :
Resultant Velocity , V = √ Vx² + Vy²
Resultant Velocity , V = √ (9.47 m/s )² + ( 3.21 m/s)²
Resultant Velocity , V = 9.99 m/s
The angle of take - off :
tan Ф = Vy / Vx
Ф = tan⁻¹ ( 9.47 / 3.21 )
= 70.97 °
Thus, the angle is 70.97 ° .
To learn more about velocity here
https://brainly.com/question/27805224
#SPJ4
The acceleration due to gravity on the moon is 1.62 m/s^2, approximately a sixth of the value on earth. for a given initial velocity v0, and a given launch angle θ0, the ratio of the range of an ideal projectile on the moon to the range of the same projectile on earth, rmoon/rearth, will be approximately?
The ratio of the ideal projectile distance on the moon to the same projectile distance on earth, moon/back, is approximately (the acceleration of gravity on the moon is 1.62 m/s², about one-sixth of the acceleration due to gravity on earth. for a given initial velocity v0 , and the specified launch angle θ0) is ⅙ (option B)
The initial velocity, launch angle, and acceleration due to gravity all affect a projectile's range. The formula for an ideal projectile's range is as follows:
R = v0²sin (2θ0) / g
Where,
v0 = the initial velocity (m/s)
θ0 = the launch angle
g = the acceleration due to gravity
The acceleration caused by gravity is 1.62 m/s² for the moon and 9.8 m/s² for the earth. Ranges on the moon and ranges on earth can be expressed as follows:
R moon / R earth = (1.62 sin (2θ0)) / g
sin (2θ0) = 1.62 / 9.8
Approximately ⅙
Consequently, an ideal projectile's range on the moon is around a sixth of its range on Earth.
The question is incomplete, it should be:
The acceleration due to gravity on the moon is 1.62 m/s², approximately a sixth of the value on earth. for a given initial velocity v0, and a given launch angle θ0, the ratio of the range of an ideal projectile on the moon to the range of the same projectile on earth, rmoon/rearth, will be approximately?
A. ⅓
B. ⅙
C. 1
D. 1/12
E. ⅕
Learn more about acceleration here: https://brainly.com/question/30101625
#SPJ4
Devon is applying 100N of force to pull 15kg object, but the object isn’t moving.what does this indicate about the coefficient of friction for the surface?
A) the surface has a low coefficient of friction
B) the surface has a high coefficient of friction
C) you can’t draw a conclusion from the information provided
D) the static coefficient of friction is equal to the appeal force
Answer:
B) the surface has a high coefficient of friction
When an object is not moving despite an applied force, it means that the frictional force is equal to or greater than the applied force. A high coefficient of friction indicates that the frictional force is strong, making it difficult to move the object. In this case, the frictional force is equal to the 100 N of force that Devon is applying, so the coefficient of friction for the surface must be high.
The table shows information about two waves. Based on the given information, which conclusion can be made?
(1 point)
Responses
Wave W has a greater amplitude.
Wave X has a faster speed.
Wave X has a greater amplitude.
Because the information is incomplete, a wave would have a greater amplitude if it has a bigger disturbance when compared to another wave.
What is Amplitude?In physics, amplitude refers to the greatest displacement or distance that a point on a vibrating body or wave can move relative to its equilibrium location. It is equivalent to the vibration path's half-length.
Hence, it can be seen that the wave's energy determines how far the medium's particles go. The amplitude of the wave determines how far the particles travel.
The energy of the disturbance that generates the wave determines the wave's amplitude. Greater amplitude results from a wave produced by a disturbance with more energy.
The general overview should give you a better understanding of waves, amplitudes and speed.
Read more about waves here:
https://brainly.com/question/25847009
#SPJ1
a ball is thrown horizontally from the roof of a building 7.6 mm tall and lands 9.9 mm from the base. part a what was the ball's initial speed?
A ball is thrown horizontally from the roof of a building then the ball's initial speed is 7.98m/s.
What is initial speed?Initial Velocity is defined as the velocity at time interval t = 0 and is represented by u.
Initial speed will be 7.68 m/s
Given, height of the building is
H = 7.5 m
As now we know that ball is thrown horizontally, so here initial speed in vertical direction is zero.
u = 1/2 * a *t^2
7.6 = 1/2 * 9.8 * t^2
t = 1.24 sec
The horizontal distance covered by the ball in the same time is , d = 9.5m
d= v t
v = 9.9/1.24
= 7.98 m/s
To know more about initial speed, refer
https://brainly.com/question/24493758
#SPJ4
a ringing bell is sending a longitudinal wave to your ear. what else is true about the longitudinal wave? check all that apply.
Longitudinally, all sound waves exist. Parallel to the wave's motion, energy is transmitted. Mechanics can produce longitudinal waves. Transverse electromagnetic waves are also possible.
What are the characteristics of electromagnetic waves?The electromagnetic spectrum is a group of wave types that includes electromagnetic waves and has some similar characteristics. All electromagnetic waves have the same speed in a vacuum, which is the speed of light, or 300,000,000 metres per second, and are transverse waves that can pass through a vacuum.
The electromagnetic wave's origin is unknown?To put it simply, a time-space-varying electric field creates a varying magnetic field at right angles to it, and the magnetic field creates an electric field at right angles to that as well. This process keeps going to create oscillations of the electric and magnetic field components, which are what make up electromagnetic waves.
To know more about electromagnetic waves visit:
https://brainly.com/question/3101711
#SPJ4
A ringing bell is sending a longitudinal wave to your ear. What else is true about the longitudinal wave? Check all that apply.
A. All sound waves are longitudinal.
B. Energy is transferred perpendicular to the wave’s motion.
C. Mechanical waves can be longitudinal.
D. Electromagnetic waves can be longitudinal.
E. Longitudinal waves require a medium to travel through.
a bullet of mass 10 g strikes a ballistic pendulum of mass 2.0 kg.the center of mass of the pendulum rises a vertical distance of 12 cm.assuming that the bullet remains embedded in the penduluffi, calculate the bullet's initial speed.
In this problem all the kinetic energy of the bullet is converted to potential 308.25∼308m/s.
Using the conservation of momentum
Therefore we have
By substitution to find the speed of the bullet
v= m bm b+m d
2gh=0.012.01
2(9.8)(0.12)
=308.25∼308m/s.
What does the term "ballistic pendulum" mean?Ballistic pendulum, a tool for determining a projectile's velocity, such as a bullet's. The pendulum bob is a large wooden block hung by two ropes. A bullet's momentum is transferred to the bob when it is shot into it. The pendulum swing's amplitude may be used to calculate the momentum of the bullet.
In this experiment, a ball shot from a spring pistol will have its velocity measured. Police laboratories have been measuring the muzzle velocities of weapons using ballistic pendulums for many years. Large block hanging by ropes made up the ballistic pendulum.
learn more about momentum
https://brainly.com/question/1042017
#SPJ4
a 90 kg fullback running east with a speed of 5.00 m/s is tackled by a 95.0 kg opponent running north with a speed of 3 m/s. if the collision is perfectly inelastic, calculate the speed and direction of the players just after the tackle and determine the mechanical energy lost as results of the collision. account of the missing energy
You decide to change the mass of the sandbag for the two actors to reduce the acceleration. The mass of the dolly and actors combined is still 94 kg, and the coefficient of kinetic friction between the dolly and the stage floor is
0.20. If you want the dolly to accelerate at 1.9 m/s?, what should the mass of the sandbag be?
A 35–40 pound sandbag must be filled halfway to two thirds of the way. The maximum permitted weight for a typical pickup truck is 30 sandbags, or around 1,000 pounds.
What sand bag weighs the most?Eight various size options for these Strongman Sandbags allow for approximative maximum load capabilities of 25LB or 50LB (for developmental practice or introduction young people to sandbag exercise) or 100, 150, 200, 250, 300, or 400LB (for experienced athletes).
How do you figure out the weight of a volume of sand?Determine the size of each mineral inside the sand to compute its weight, then multiply that volume by its mass density. The weight of the sand can then be calculated by multiplying the mass of each component element by the regional acceleration of gravity.
To know more about weight visit:
https://brainly.com/question/11244838
#SPJ1
a tuna salad is removed from the cooler at 9:00 a.m. and put out for a buffet at 11:00 a.m. by what time must the tuna salad be served or thrown out?
At 9:00 am, a tuna salad is taken out of the cooler, and at 11:00 am, it is set out for a buffet. The deadline for serving or discarding the tuna salad is 3:00 PM.
When should the tuna salad be thrown out?Tuna salad can be kept in the fridge for three to five days when properly refrigerated. How long can you leave tuna salad out in the open? When left out for longer than two hours at room temperature, tuna salad should be thrown away because bacteria grow quickly between 40 and 140 degrees Fahrenheit.
Can cold food be kept for up to 4 hours without a temperature control?If the following conditions are met, it is OK to store cold food without ceramic heaters for more than four hours. requirements are satisfied Before being taken out of the temperature control, food must be kept at 41 degree Fahrenheit or lower. When the food is first received, label it with the expiration date.
To know more about ceramic heaters visit :
https://brainly.com/question/14020455
#SPJ4
an athlete swims the length l of a pool in a time t 1and makes the return trip to the starting position in a time t 2. if she is swimming initially in the positive x direction, determine her average velocity for: the second half of swim g
The average velocity for the second half of the swim can be calculated is : v = d / t = l / t2
What is meant by average velocity?Change in position or displacement (∆x) divided by the time intervals (∆t) in which the displacement occurs is called average velocity.
To determine the average velocity of athlete for the second half of the swim, you need to know distance she covered and the time she took to cover it.
The distance covered in the second half of the swim is the length of the pool, l. The time taken for the second half of the swim is t2.
So, the average velocity for the second half of the swim can be calculated as follows:
v = d / t = l / t2
where d is the distance covered, t is the time taken, and v is the average velocity.
To know more about average velocity, refer
https://brainly.com/question/1844960
#SPJ4
two identical aluminum objects are insulated from their surroundings. object a has a net charge of excess electrons. object b is grounded. which object is at a higher potential?
Object A has net charge of excess electrons and object B is grounded. Object that is at a higher potential is : B.
What is meant by potential difference?Electric potential difference is also known as voltage. It is the external work needed to bring charge from one location to another location in electric field. Electric potential difference is change of potential energy experienced by test charge that has value of +1 .
Electric potential is the amount of work needed to move unit charge from a reference point to specific point against electric field. Electric potentials and electric fields in given region are related to each other and thus either can be used to describe the electrostatic properties of space.
To know more about potential difference, refer
https://brainly.com/question/24142403
#SPJ4
what is the potential energy for the child just as she is released, compared with the potential energy at the bottom of the swing?
The required potential energy at the bottom of the swing is calculated to be 78.7 J.
The mass of the child is given as m = 20 kg
Length of the rope L = 1.8 m
Angle of the rope from the vertical after pulling is θ = 39°
The swinging motion of the child is shown in the figure in the attachment below.
Let us calculate the potential energy for the child at extreme position with respect to the bottom position,
PE = m g ( L - L cos θ) = 20× 9.81 × 1.8 ( 1 - cos 39°) = 78.7 J
Here, g is acceleration due to gravity
Thus, the potential energy for the child just as she is released, compared with the potential energy at the bottom of the swing is calculated to be 78.7 J.
The given question is incomplete. The complete question is 'A 20 kg child plays on a swing having support ropes that are 1.8 m long. A friend pulls her back until the ropes are 39° from the vertical and releases her from rest.'
To know more about potential energy:
https://brainly.com/question/15170001
#SPJ4
consider a pool game being played on a pool table on the deck of an aircraft carrier near the bow (front). assume that the carrier is moving north at 25.0 m/s . as a result of the initial break, a ball flies over the edge of the table and over the edge of the deck with a horizontal component of velocity directed toward the bow of the ship of 5.00 m/s . what is vbw , the horizontal component of the speed with which this ball strikes the water in front of the ship (i.e., what is the speed of the ball relative to the water)?
The horizontal component of the ball's speed relative to the water is around 30.0 m/s.
What is velocity?The direction of movement of the body or item is defined by velocity. Speed is fundamentally a scalar number. Velocity is, in essence, a vector quantity. It is the pace at which distance changes. It is the displacement rate of change. The velocity of an object is the rate at which its location changes in relation to a frame of reference and is a function of time. Velocity is similar to a speed and direction of motion specification (e.g., 60 km/hr to the north).
Here,
To find the horizontal component of the speed with which the ball strikes the water, we need to consider both the velocity of the carrier and the horizontal component of the velocity of the ball.
The horizontal component of the speed of the ball relative to the water is given by:
v_bw = v_bs + v_ship
where:
v_bw is the horizontal component of the speed of the ball relative to the water
v_bs is the horizontal component of the velocity of the ball (5.00 m/s)
v_ship is the velocity of the carrier (25.0 m/s)
So, the horizontal component of the speed of the ball relative to the water would be:
v_bw = 5.00 m/s + 25.0 m/s = 30.0 m/s
The horizontal component of the speed of the ball relative to the water is approximately 30.0 m/s.
To know more about velocity,
https://brainly.com/question/14326156
#SPJ4
which two attributes are the most weakly correlated? engine size and cylinders acceleration and mpg engine size and mpg acceleration and vweight
Engine size and mpg (miles per gallon) are the two attributes that are most weakly correlated
Which two attributes are most weakly correlated?Engine size and mpg (miles per gallon) are the two attributes that are most weakly correlated. Engine size and mpg have a negative correlation, meaning as engine size increases, mpg decreases.
Acceleration and engine size have a positive correlation, meaning as engine size increases, acceleration also increases. This correlation is stronger than the correlation between engine size and mpg.
Acceleration and vehicle weight have a negative correlation, meaning as vehicle weight increases, acceleration decreases. This correlation is also stronger than the correlation between engine size and mpg.
To know more about correlation, refer
https://brainly.com/question/29614169
#SPJ4
a vw beetle goes from 0 to 60.0 mi/h with an acceleration of 2.35 m/s2. (a) how much time does it take for the beetle to reach this speed? (b) a top-fuel dragster can go from 0 to 60.0 mi/h in 0.700 s. find the acceleration (in m/s2) of the dragster.
So, with an acceleration of 2.35 m/s², the VW Beetle takes 11.38 seconds to reach 60.0 miles per hour. As a result, the top-fuel dragster's acceleration is 38.3 m/s².
What is acceleration?The rate of change of velocity is defined as acceleration. Acceleration usually indicates that the speed is changing, however this is not always the case. When an item goes on a circular course with a constant speed, it is still accelerating since its velocity direction changes. Acceleration is the rate at which velocity varies over time, both in terms of speed and direction. A point or object travelling in a straight path is accelerated if it accelerates or decelerates.
Here,
a. To find the time it takes for the VW Beetle to reach 60.0 mi/h with an acceleration of 2.35 m/s², we can use the equation:
v = a * t
Where v is the final velocity, a is the acceleration, and t is the time. To convert 60.0 mi/h to m/s, we can use the conversion factor 1 mi/h = 0.447 m/s:
60.0 mi/h = 60.0 * 0.447 m/s = 26.82 m/s
So we can solve for t:
t = v / a = 26.82 m/s / 2.35 m/s² = 11.38 s
So it takes the VW Beetle 11.38 s to reach 60.0 mi/h with an acceleration of 2.35 m/s².
b. To find the acceleration of the top-fuel dragster, we can use the equation and the information given:
v = a * t
Where v is the final velocity, a is the acceleration, and t is the time. To convert 60.0 mi/h to m/s, we can use the conversion factor 1 mi/h = 0.447 m/s:
60.0 mi/h = 60.0 * 0.447 m/s = 26.82 m/s
And we know t = 0.700 s. So we can solve for a:
a = v / t = 26.82 m/s / 0.700 s = 38.3 m/s²
So it takes the VW Beetle 11.38 s to reach 60.0 mi/h with an acceleration of 2.35 m/s². So the acceleration of the top-fuel dragster is 38.3 m/s².
To know more about acceleration,
https://brainly.com/question/13262345
#SPJ4
When a solute is added to a liquid, the freezing point of the resulting solution is _____ than the freezing point of the pure liquid.A. higherB. no differentC. lower
The melting point of the clear supernatant is lower than for the 0 ° c of the original liquid when a solution is added to it.
How do melting and freezing points differ?The temperature at which a material becomes liquid or solid is known as the melting or freezing point of that substance. Depending on the degree of bonding in between particles plus their mass, various substances have varying melting points.
Is 0 always the freezing point?Water typically has a freezing point and melting point of 0 °C or 32 °F. If supercooling takes place or there are pollutants in the water that might cause freezing point elevation to happen, the degree may be lower.
To know more about Freezing point visit:
https://brainly.com/question/30168966
#SPJ4
At the beach in the daytime, a cool breeze generally blows from the water to the shore.
What is the name of this process of thermal energy transfer?
The name of this process of thermal energy transfer is convection.
How does the heat get transmitted during land breeze by convection?The sea and the land breeze are due to the convection current of air. The conduction or the radiation can not take place because the process of conduction generally takes place in solids and the process of radiation process must need an inert medium to transmit heat energy from one place to another.
Convection is the process in which energy is transferred between two mediums that is a surface and fluid which flows over the surface. In the convective method, the heat energy transfer is transferred by diffusion (conduction) and by bulk fluid motion (advection).
so we can conclude that Convection is the main method of heat energy transfer in fluids such as water and air.
learn more about energy here:https://brainly.com/question/13881533
#SPJ1