The magnitude of the net gravitational force on the central particle due to the other particles is zero.
The direction of the net gravitational force is also zero, since all of the forces on the central particle due to the other particles cancel out.
Given the mass of central particle = m
It is surrounded by array of square of other particles.
The particles are separated by a distance of d or d/2
We know the force of gravity is F = GMm/r^2 where G is the gravitational constant and r is the distance between the particles.
Each particle's gravitational force on one side of the square cancels out the gravitational pull of one of the other side's particles.
The magnitude of gravitational force acting on the particles is zero because the forces due to all other charges cancel due to the symmetry considerations.
To learn more about gravitational force click here https://brainly.com/question/24783651
#SPJ4
It has been proposed to use uranium carbide (UC) for the initial fuel in certain types of breeder reactors, with the uranium enriched to 25 w/o. The density of UC is 13.6 g/cm3 . The molecular weight of U-235 and U-238 are 235.0439 and 238.0508 respectively. (a) What is the atomic weight of the uranium? (b) What is the atomic density of U-235?
(a) The atomic weight of uranium can be calculated as a weighted average of the atomic weights of the isotopes U-235 and U-238, taking into account their natural abundances. The atomic weight of uranium is approximately 238.03 g/mol.
(b) To calculate the atomic density of U-235, we need to know the mass fraction (or weight fraction) of U-235 in uranium carbide fuel. Considering that uranium is enriched to 25 w/o U-235, the mass fraction of U-235 is 0.25. The atomic density of U-235 can then be calculated as follows:
atomic density = (mass fraction of U-235) * (UC density) / (atomic weight of U-235)
= (0.25) * (13.6 g/cm3) / (235.0439 g/mol)
= about 7.07 x 10^22 atoms/cm3
"Atomic" is a term that has many related but different meanings. In physics, "atom" refers to the smallest unit of an element that retains the chemical properties of that element. In computer science, "atomic" is used to describe an operation that is indivisible and cannot be stopped. This means that the operation was completed in its entirety or not at all.
You can learn more about atomic here brainly.com/question/13981855
#SPJ4
The jet car is originally traveling at a velocity of 10 m/s when it is subjected to the acceleration shown. When t = 0, s = 0. Suppose that a1 = 5.5 m/s2 , a2 = -3.5 m/s2 , and t′′ = 15 s
a. The car's maximum velocity is 92.5 m/s.
b. The time t' when the car stops is 41.429 s.
The question is not complete. A similar question is in the attachment. A jet car has acceleration, so the car moves in a non-uniform motion. The formula to calculate the final velocity in non-uniform motion
v₂ = v₁ + at
v₁ = initial velocity (m/s)a = acceleration (m/s²)t = time (s)v₂ = final velocity (m/s)Look at the picture. First part from t = 0 to t"
v₁ = 10 m/sa = a₁ = 5.5 m/s²Second part, from t" to t'
The initial velocity is the final velocity from the first part of acceleration.Learn more about acceleration here: https://brainly.com/question/14344386
#SPJ4
consider the action of the biceps when carrying a load of 8 kg with the forearm making an angle of 20
When carrying a load of 8 kg with the forearm making an angle of 20, the biceps muscle must exert a force to hold the forearm and its load in place.
The amount of force the biceps must exert depends on the lever arm of the load, which is the perpendicular distance between the line of action of the force and the axis of rotation.
The lever arm of the load in this case is the distance between the line of action of the load and the axis of rotation of the elbow joint. With a lever arm of 8 kg and an angle of 20 degrees, the biceps must exert a force of 16.47 Newtons.
Learn more about Force:
https://brainly.com/question/12785175
#SPJ4
for general projectile motion, which of the following best describes the horizontal component of a projectile's acceleration? assume air resistance is negligible.
Assume there is little air resistance the acceleration of a projectile has no horizontal component.
What happens to a projectile's horizontal component of velocity in a projectile's typical motion?The object is moved downward from its position if gravity didn't exist as a result of the downward force and acceleration. A projectile maintains the same angular momentum because there are no horizontally forces acting on it, hence the force of gravity has no effect on the angular position of motion.
Is there zero acceleration in the horizontal component?The speed, which is larger than 115 m/s as expected, is a result of both vertical and horizontal velocity components. As seen in Figure 3.10, the velocity vector forms an aspect q with the horizontal: A crucial aspect of falling object.
To know more about momentum visit :
https://brainly.com/question/29113044
#SPJ4
you are hired by an optics manufacturer to design a high-precision mirror alignment system. the resolution for mirror displacements must be on the order of a few nanometers and these deflections must be driven by electrical voltages. which of the following materials properties would you consider most important when selecting a material for this system? you are hired by an optics manufacturer to design a high-precision mirror alignment system. the resolution for mirror displacements must be on the order of a few nanometers and these deflections must be driven by electrical voltages. which of the following materials properties would you consider most important when selecting a material for this system? thermal expansion coefficient electrical resistivity thermal conductivity piezoelectric coefficient
An optics manufacturer commissions you to create a highly accurate mirror alignment system. Mirror displacements must have a resolution of a few nanometers, and these
What is placement dis?
An volume or mass of a liquid (such as water) that is displaced by a lifting surface (such as a vessel) of equivalent weight is referred to as displacement: the distinction between an object's initial position and any subsequent positions additionally: the total volume that all of an internal combustion engine's pistons displace in this manner
Displacement activity: what is it?
furthermore, automobiles: Internal combustion engines' required amount so displaced by all of their pistons is referred to as displacement activity or displacement behavior. Numerous people have been displaced as a result of the war. shifts in the Earth's mantle soil shifting brought on by farming
To know more about displacements visit:
https://brainly.com/question/14637077
#SPJ4
114 Find two elements of R4 which belong to the span of the following vectors. Find an element of Rtwhich does nOt belong to their span. (Hint: Compute Ithe sum of the entries of each of the given vectors | Xi=lEI X [S_Um} 24 X=[}-2-2]'
The span of a set of vectors is the set of all linear combinations of those vectors. In this case, the set of vectors is:
X1 = [1, 2, 3, 4]
X2 = [2, 4, 6, 8]
Two elements in R4 that belong to the span of these vectors are:
a1X1 + a2X2 = [a1 + 2a2, 2a1 + 4a2, 3a1 + 6a2, 4a1 + 8a2]
So for example, if we choose a1 = 1 and a2 = -1, we get:
a1X1 + a2X2 = [1 - 2(-1), 2(1) - 4(-1), 3(1) - 6(-1), 4(1) - 8(-1)] = [3, 0, 9, -3]
Another example is if we choose a1 = 2 and a2 = -2, we get:
a1X1 + a2X2 = [2 - 2(-2), 2(2) - 4(-2), 3(2) - 6(-2), 4(2) - 8(-2)] = [6, 0, 18, -6]
To find an element of R4 that does not belong to the span of these vectors, we need to find a vector in R4 that cannot be expressed as a linear combination of X1 and X2. For example, the vector [1, 1, 1, 1] cannot be expressed as a linear combination of X1 and X2, so it does not belong to their span.
For more questions like Vectors visit the link below:
https://brainly.com/question/29578595
#SPJ4
a 10-n block and a 1-n block lie on a horizontal frictionless table. to impart equal horizontal accelerations, we would have to push the heavier block with
We would need to apply 10 times as much force to the heavier block in order to impart equivalent horizontal accelerations.
What is the correct unit of measurement for an object's weight?When the weight or gravitational force of an item is represented in "kilograms," the SI-noncompliant kg of kg f or kg-f, also called as the kilopond kp, is truly meant. The gravitational acceleration experienced by all things on the surface of the Earth is roughly 9.8 m/s2.
What is the weight formula?Weight = energy x gravity is the formula for relating mass and weight. This formula, which is also known as Newton's Second Law of Motion, states that force (or mass) is measured in Newtons (N), mass (m), and acceleration.
To know more about gravitational force visit :
https://brainly.com/question/24783651
#SPJ4
graphing calculator is recommended. If a rock is thrown upward on the planet Mars with velocity 14 m/s; its height in meters seconds later is given y = 14t 1.86t2. (Round your answers to two decimal places (a) Find the average velocity (in m/s) over the given time intervals_ [1, 2] m/s [1, 1.5] mls [1, 1.1] mjs [1, 1.01] m/s [1, 1.001] mls (b) Use your answers from part (a) to estimate the instantaneous velocity of the rock (in m/s) when t = 1 m/s
A). The average velocity (in m/s) over the given time intervals is 7.94 m/s.
B). This value is the instantaneous velocity of the rock at t = 1 s, which is approximately 7.94 m/s.
The average velocity of the rock can be found using the formula: average velocity = (final position - initial position) / (final time - initial time).
(a) [1, 2] s: average velocity = (14(2) - 14(1) - 1.86(2^2) + 1.86(1^2)) / (2 - 1) = 4.14 m/s
[1, 1.5] s: average velocity = (14(1.5) - 14(1) - 1.86(1.5^2) + 1.86(1^2)) / (1.5 - 1) = 5.61 m/s
[1, 1.1] s: average velocity = (14(1.1) - 14(1) - 1.86(1.1^2) + 1.86(1^2)) / (1.1 - 1) = 7.31 m/s
[1, 1.01] s: average velocity = (14(1.01) - 14(1) - 1.86(1.01^2) + 1.86(1^2)) / (1.01 - 1) = 7.88 m/s
[1, 1.001] s: average velocity = (14(1.001) - 14(1) - 1.86(1.001^2) + 1.86(1^2)) / (1.001 - 1) = 7.94 m/s
(b)This value is the instantaneous velocity of the rock at t = 1 s, which is approximately 7.94 m/s.
Average velocity is a measure of the overall rate of motion of an object over a certain time period. It is different from average speed, which is a measure of the total distance traveled over a certain time period. Average velocity takes into account not only the distance traveled, but also the direction of motion.
Average velocity is calculated by dividing the change in position (displacement) by the time interval over which the motion occurs. It is expressed in units of distance per unit time, such as meters per second or miles per hour. The formula for average velocity is given by v = Δx / Δt, where Δx is the change in position and Δt is the change in time.
Average velocity is commonly used in physics and engineering to determine the motion of objects in one-dimensional systems, such as along a straight line. For example, the average velocity of a car traveling from one location to another can be determined by measuring the change in its position over a certain time period.
To learn more about Average velocity visit here:
brainly.com/question/18153640
#SPJ4
An experiment is performed using a sensitive ammeter attached to a length of conducting wire shaped into a coil. In the first trial, a bar magnet is quickly and repeatedly pushed into and pulled out of the space inside the coil. The reading on the ammeter indicates that the current is positive as the bar magnet moves forward into the coil. For the second trial, the connections between the ends of the coil of wire and the connections of the ammeter are reversed. The bar magnet is again quickly and repeatedly pushed into and pulled out of the space inside the coil. The reading on the ammeter shows that the current is again positive as the bar magnet moves forward into the coil. Which of the following is a correct claim about the second trial and indicates the Maxwell equation that provides the evidence? A. According to the Biot-Savart law, the poles of the magnet are aligned relative to the loop, the same as in the first trial. B According to Faraday's law, the poles of the magnet are aligned relative to the loop, the same as in the first trial. с According to Ampere's law, the poles of the magnet are aligned relative to the loop, the same as in the first trial. D According to Faraday's law, the poles of the magnet are reversed relative to the loop, as compared to the first trial.E According to Ampere's law, the poles of the magnet are reversed relative to the loop, as compared to the first trial.
According to Faraday's law, the poles of the magnet are reversed relative to the loop, as compared to the first trial. Option D
What is the Maxwell law of electromagnetism?The Maxwell laws of electromagnetism are a set of four equations that describe the behavior of electric and magnetic fields and their interaction with charged particles. These laws form the foundation of classical electromagnetism and predict the behavior of electromagnetic waves, including light. The laws are named after the Scottish physicist James Clerk Maxwell.
From the Faraday's law, we know that it is the relative motion between the coil and the magnet that induces current.
Learn more about induced current:https://brainly.com/question/3712635
#SPJ1
the pressure drop across a short hallowed plug placed in a circular tube through which a liquid is flowing through can be expressed as g
The pressure drop across a short, hallowed plug in a circular tube through which a liquid is flowing can be expressed as: ΔP = KΔv^2,
where ΔP denotes the pressure drop, Δv is the velocity change of the fluid and K is a constant of proportionality that depends on the geometrical parameters of the tube and the fluid properties.
What doe sthe above equation shows?The equation shows that the pressure drop is proportional to the square of the velocity change. The value of K can be determined experimentally or calculated using fluid dynamics models.
What causes pressure drop?The pressure drop is caused by various factors, including fluid viscosity, pipe roughness, diameter, and flow rate. The pressure drop across a pipeline is directly proportional to the fluid velocity.
To know more velocity, visit here:
https://brainly.com/question/18084516
#SPJ4
let m be a square upper triangular matrix (as defined in exercise 12 of section 1.3) with nonzero diagonal entries. prove that the columns of m are linearly independent.
Let M n stand for an n-dimensional upper triangular square matrix. On n, we apply induction. There is no evidence to support the null hypothesis for n = 1. Assume that the assertion is accurate for n 1 and n > 1.
What is accurate ?
English language learners The definition of exact is the absence of faults or mistakes and the capacity to provide correct outcomes. view the definition of accurate in the Learner's Dictionary for English Language Learners.
What does accurate proofreading mean?
being diligent; acting or acting with care and accuracy: a thorough proofreader. [Latin: accrtus, done with care; accrre, to do with care] Ad-, ad- + crre, to care for (form cra, care; see cure) Accuracy (noun) Fifth Edition of the American Legacy® Lexicon of the English Language.
To know more about accurate visit:
https://brainly.com/question/28336863
#SPJ4
The systematic ways in which our ethics are limited in ways we are not even aware of ourselves is called _______________
The systematic ways in which our ethics are limited in ways we are not even aware of ourselves is called implicit bias.
Implicit bias refers to the unconscious attitudes, beliefs, and stereotypes that influence our thoughts and actions in ways we are not even aware of. This type of bias is often a result of cultural and societal conditioning, and it can impact our decision-making processes and behavior even when we consciously believe that we are being fair and objective. Implicit bias can affect all aspects of our lives, from our personal relationships to our professional practices, and it is a significant factor in perpetuating discrimination and inequality. Understanding and recognizing implicit bias is crucial for promoting equality and fairness in society, and for developing more equitable and just ethical practices.
Learn more about implicit bias:
brainly.com/question/30391870
#SPJ4
A block of white color is kept on a table. Suppose you are looking at this block through a glass which allows only red light to pass through it. What would be the color of the block as seen by you using the glass
Answer:
red
Explanation:
The color of the block as seen by you using the glass would be red.
When white light passes through a red filter, only the red portion of the light is allowed to pass through. The other colors (blue, green, yellow, etc.) are absorbed by the filter. So, when you look at the white block through a red filter, you will only see the red portion of the light reflected off the block, making it appear red to your eye.
Answer:
Red only
Explanation:
The colour of the block as seen by you using the glass would be red.
the photograph below shows a girl pushing on a large stone sphere. the sphere has a mass of 8200 kg and a radius of 90 cm and floats with nearly zero friction on a thin layer of pressurized water.
The time that will take the girl to rotate the sphere one time (the sphere has a mass of 8200 kg and a radius of 90 cm and floats with nearly zero friction on a thin layer of pressurized water) starting from rest = 35.16 s
To determine the time it's take the girl to rotate, use the intertia formula:
I = ⅖ (m) (r²)
Where,
I = inertia
m = mass of the object (kg)
r = radius
Hence,
I = ⅖ (8200) (0.9)²
= 2657 kgm²
Determine the torque,
τ = (I)(α)
(30) (0.9) = (2657) α
α = 0.01016 rad/s²
Θ = ½(α) (t²)
2π rads = ½ (0.01016) (t²)
t =sqrt(4π 0.0106)
t = 35.16 s
The question is incomplete, it should be:
There is a girl pushing on a large stone sphere. The sphere has a mass of 8200 kgand a radius of 90 cm and floats with nearly zero friction on a thin layer of pressurized water. Suppose that she pushes on the sphere tangent to its surface with a steady force of F = 30N and that the pressured water provides a frictionless support.1) How long will it take her to rotate the sphere one time, starting from rest?
Learn more about torque here: https://brainly.com/question/29385853
#SPJ4
the load impedance in (figure 1) absorbs 2.5 kw and generates 5 kvar . the sinusoidal voltage source develops 7.5 kw . suppose that r
I = I sin t, where I is the maximum current and I is the current at time t, can be used to describe a sinusoidal alternating current. Similarly, we can write v = V sin t for an alternating sinusoidal voltage.
How would one define sinusoidal?A variable that is based just on sine function, a periodic value that oscillates smoothly between low and high values is referred to as a sinusoidal function. Since the cosine function is simply a horizontally shift of sine function, sinusoidal calculations can also be built on it.
Why is AC known as sinusoidal?Periodic waveforms known as sine waves can be represented graphically using the sin or cosine trigonometric functions. Electrical circuits that receive "AC" voltages and currents, or sinusoidal waveforms that polarity alternates on each cycle.
To know more about sinusoidal voltage. visit:
https://brainly.com/question/24321372
#SPJ4
new starif you follow the arc of the big dipper handle to the next bright star in the sky, you will finds appear to be formed in
If you follow the arc of the big dipper handle to the next bright star in the sky, you will find Arcturus.
Arcturus is a giant, orange star located in the constellation Bootes and is the brightest star in the northern celestial hemisphere. If you follow the arc of the Big Dipper handle, you will eventually find Arcturus, which is considered one of the most prominent stars in the night sky. It is approximately 36.7 light-years away from Earth and has a luminosity that is approximately 110 times greater than our sun.
Arcturus is a type of star known as a K-type giant, which means it has exhausted the hydrogen fuel in its core and expanded to its current size. This star is also known for its high proper motion, which means it appears to move rapidly across the sky relative to other stars. Arcturus is considered a key star for navigation, as its position in the sky remains relatively constant and can be used as a reference point for astronomers and stargazers alike.
To learn more about Arcturus visit: https://brainly.com/question/59302
#SPJ4
Your question seems to be missing, but I suppose the question was:
"If you follow the arc of the big dipper handle to the next bright star in the sky, you will find _____."
a ball is thrown directly downward with an initial speed of 7.70 m/s, from a height of 29.9 m. after what time interval does it strike the ground
The ball strikes the ground after 2.46 seconds.
The time interval can be calculated using the following equation:
t = [tex]\frac{2h}{g}[/tex]
where h is the height from which the ball was thrown (29.9 m), g is the acceleration due to gravity (9.8 m/s), and t is the time interval.
Substituting the values, we get:
t = (2 x 29.9 / 9.8) = (59.8 / 9.8) = [tex]\sqrt{6.1}[/tex] = 2.46s
So, the ball strikes the ground after 2.46 seconds.
Time is a continuous progression of events that occur in a linear sequence. It is a measure of the duration between two events and is an essential aspect of our lives. Time is fundamental to our understanding of the world and our place in it, as it allows us to track the passing of days, seasons, and years. It is an intangible concept that is difficult to define but is central to our experiences of the world. Time is an essential component of physics, as it is used to measure the duration of physical events and the speed of processes. Time is often described as the fourth dimension and is related to space and matter, as well as energy and momentum.
Learn more about time:
brainly.com/question/28050940
#SPJ4
After an initial test run Mike determines that his pump does 240 J of work (W1). Calculate the amount of work (W2) in J that Mike would expect his pump to do if its volume were 3.5 times greater.
The Pump has a 240 J of work in normal condition. The change in volume of work will decrease the work performance of pump,
Since water discharge is equal to volume: [tex]Q=\frac{V}{t}[/tex]
And Power is equal to Work: [tex]P=\frac{J}{s}[/tex]
Then if the volume were 3.5 greater, than the Work of Pump will be 3.5 less than before, around 68.75 J
To learn more about water discharge, check on : https://brainly.com/question/13910551
#SPJ1
A roller coaster starts from rest at its highest point and then descends on its (frictionless) track. Its speed is 34 m/s when it reaches ground level. What was its speed when its height was half that of its starting point? 12 m/s 24 m/s 17 m/s 28 m/s
A roller coaster begins at its highest point, where it is at rest, & then drops on its frictionless track. When it reaches the bottom, it moves at a velocity of 34 m/s & 24 m/s when it is halfway up from its starting place.
What is the potential energy whenever a roller coaster hits its greatest point?On a roller coaster, the gravitational potential is greatest at the top and lowest at the bottom. Kinetic energy (KE) is known as energy an item has due to its motion and thus is equal with one the item's mass multiplied by the object's velocity squared (mv2).
Is the descent and acceleration of a roller coaster potential or kinetic?The transformation of potential energy into kinetic energy drives the motion of a roller coaster. The potential energy of the rollercoaster ride cars increases as they are propelled to the summit of the initial hill. Potential energy is transformed into kinetic energy as the cars fall.
To know more about velocity visit:
https://brainly.com/question/18084516
#SPJ4
1.
Mechanical advantage is expressed in newtons squared.
True or false ?
Mechanical advantage has no unit, Hence, the statement that Mechanical advantage is expressed in newtons squared is False.
What is a mechanical advantage?A primary machine's mechanical advantage quantifies how much work goes into it and is used to manipulate the load. In other words, it is the ratio of a machine's input to output work. It has no units because it is the ratio of two identical quantities.
Mathematically, mechanical advantage = load/effort or work output/ work input
The higher the mechanical advantage of a machine, the more efficient will be the machine.
Learn more about mechanical advantage at: https://brainly.com/question/25984831
#SPJ1
determine the length of a hex head bolt for the following application: mounting hole size: 0.875 inch, mounting thickness including foot: 1.500 inches, plain washer thickness: 0.102 inch, lock washer thickness: 0.188 inch.
The minimum length of the bolt required is 2.665 inches, plus an additional length for the hex head.
The length of a hex head bolt for a specific application can be determined by adding up the thicknesses of the different components that make up the assembly. In this case, the components include the mounting hole, the mounting thickness including the foot, the plain washer, and the lock washer.
The mounting hole size is 0.875 inches, which is the distance between the surfaces being connected. The mounting thickness including the foot is 1.500 inches, which represents the thickness of the material to which the bolt will be attached.
The plain washer thickness is 0.102 inches, which is added to ensure even distribution of pressure on the mounting surface and to prevent damage to the surface during tightening. The lock washer thickness is 0.188 inches, which is added to prevent the bolt from loosening over time.
In total, the thicknesses of these components are 0.875 + 1.500 + 0.102 + 0.188 = 2.665 inches. Therefore, the minimum length of the hex head bolt required for this application is 2.665 inches.
It is important to note that this length does not include the length of the hex head itself. In most cases, an additional 0.25 to 0.375 inches is required for the length of the hex head.
Learn more about length here:
https://brainly.com/question/27752079
#SPJ4
three objects are brought close to each other, two at a time. when objects a and b are brought together, they repel. when objects b and c are brought together, they also repel. which of the following are true? (select all that apply.)
Since all three objects a, b and c repel one another, they possess charges of the same sign.
Assuming all three objects are conductors, the electric charge, either positive or negative, will be evenly distributed throughout the object.
Opposite charges attract each other, while same charges repel. Object a and b repel when they are brought together, which means that both objects have the same charge. This is the same case with object b and c. This means that all three objects possess the same charge.
The multiple choices are most probably these:
A. Objects a and c possess charges of the same sign.B. Objects a and c possess charges of opposite sign. C. All three objects possess charges of the same sign. D. One object is neutral.E. Additional experiments must be performed to determine the signs of the charges.Learn more about electric charges at https://brainly.com/question/874116.
#SPJ4
Which is the equation for a machine’s efficiency?(1 point)
The equation for a machine’s efficiency is = (output energy ÷ input energy) × 100%
What is efficiency ?Efficiency is the ability to achieve something or get a desired outcome without wasting resources, time, money, energy, or effort. In a broader sense, it is the capacity to carry out tasks effectively and efficiently.
It denotes the degree of performance that requires the fewest inputs to provide the greatest amount of output in more mathematical or scientific words.
Hence, mathematically, machine’s efficiency can be expressed as:
machine’s efficiency = (output energy ÷ input energy) × 100%
Learn more about efficiency here:
https://brainly.com/question/13828557
#SPJ1
Required information Problem 11.009 - Slowing car - DEPENDENT MULTI-PART PROBLEM - ASSIGN ALL PARTS NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. The brakes of a car are applied, causing it to slow down at a rate of 18 ft/s2. The car stops at 300 ft. 300 ft Problem 11.009.a - Slowing car: constant deceleration and distance traveled Determine how fast the car was traveling immediately before the brakes were applied. (You must provide an answer before moving to the next part.) The speed of the car immediately before the brakes were applied was ft/s. Problem 11.009.b - Slowing car: constant deceleration and elapsed time Determine the time required for the car to stop. The time required for the car to stop is S.
The acceleration is 7m/s².
For Part a, we can use the equation of motion for constant acceleration:
v f = v_0 + a x t
where v f is the final velocity, v_0 is the initial velocity, a is the acceleration, and t is the time. Since the final velocity is 0, we can write:
t = -v 0 / a
Next, we can use the distance formula:
d = v_0 x t + 0.5 x a x t²
where d is the distance traveled. Plugging in the value of t from the previous equation, we get:
d = v_0 x (-v_0 / a) + 0.5 x a x (-v_0 / a)²
d = -v_0² / 2a
Now, we can solve for v_0 using the value of d:
v_0 = (2 x a x d) = (2 x 18 x 300)= 102.9 feet/s
For Part b, we can use the equation for t from Part a:
t = -v_0 / a = -102.9 / 18 = 5.71 s
Acceleration is the rate of change of velocity of an object over time. It is a vector quantity with units of meters per second squared (m/s²) in the SI system. Acceleration can be caused by various factors such as force, changes in velocity, and changes in direction. Positive acceleration indicates that the velocity of an object is increasing, while negative acceleration indicates that the velocity is decreasing. In a uniform acceleration, the velocity of an object changes by an equal amount over equal time intervals.
Learn more about acceleration:
brainly.com/question/21509870
#SPJ4
geothermal energy is used to run large and complex power stations as well as small and relatively simple pumping systems. which of the following most accurately explains how geothermal energy is produced and utilized in these applications?
The statement that accurately explains how geothermal energy is produced and utilized is the one that says that geothermal energy uses the natural insulating power of Earth to create temperature differentials that are used to heat buildings in the winter and cool them in the summer.
Geothermal energy is the thermal or heat energy in the Earth's crust. It originates from the formation of the planet as well as from various materials' radioactive decay.
Geothermal energy has been used for thousands of years. Geothermal heating (using hot springs water for heating) has been used for pathing since Paleolithic times, while space heating has been existing since ancient Roman times. Recently, geothermal power is used to generate electricity as well.
Attached below is a picture of a power plant that utilizes geothermal energy, the Nesjavellir Power Plant.
Your question seems incomplete. The completed version is most likely as follows:
Geothermal energy is used to run large and complex power stations as well as small and relatively simple pumping systems. Which of the following most accurately explains how geothermal energy is produced and utilized in these applications?
Geothermal energy uses heat from the Sun to raise the Earth's surface temperatures to a point where these applications can heat homes and buildings.Geothermal energy uses heat from the Sun to create atmospheric temperature gradients, which in turn power turbines to generate electricity.Geothermal energy uses the natural insulating power of Earth to create temperature differentials that are used to heat buildings in the winter and cool them in the summer.Geothermal energy cannot be tapped directly from heat generated by volcanoes or other geologically active areas.Learn more about geothermal energy at https://brainly.com/question/1197584
#SPJ4
two stones are thrown vertically upward from the ground, one with three times the initial speed of the other. assume free fall.
Stone speed is equal to three times stone speed if the stones are the same size. The stone will touch the earth in 10/3s, or 3.3 seconds because gravity will affect both stones equally during the fall.
When a stone is thrown vertically upward, what two forces are at work on the object?Gravitational force acts downhill when a stone is propelled vertically, while muscular force or an applied force acts upward.
Why does a stone being hurled vertically upward lose speed?Gravity tries to pull the stone down when it is thrown vertically upward, slowing down its motion. After a period, the velocity falls to zero as a result of this persistent downward drag.
to know more about speed here:
brainly.com/question/8011798
#SPJ4
following are the results of a sieve analysis. draw a particle-size distribution curve and determine cu
In order to plot each sieve % on the distribution curve, you must divide the entire mass of the sample material by the weight that was either retained or that passed thru every sieve.
What does the sieving method's particulate size distribution mean?As the asymmetric energy sieve method directly provides weight distribution, sieve methodology provides sieve diameter, which is determined as the micrometer of the globe that passes through the sieve aperture. By using the sieve process, particles of sizes between 50 and 1500 m are estimated.
Which two forms of particle size estimation are there?Adaptive mien scattering and laser particulate analyzers are two of the primary categories of particle size analyzers. Particles in solutions are measured by dynamic light diffracted analyzers between 0.6 nm and For particle in a substance that are between 10 nm and 3 mm in size, analyzers are utilized.
To know more about energy visit :
https://brainly.com/question/1932868
#SPJ4
clcl express your answer in condensed form in order of increasing orbital energy as a string without blank space between orbitals. for example, [he]2s22p2[he]2s22p2 should be entered as [he]2s^22p^2.
The electron configuration of Cl (chlorine) is [Ne] 3s^2 3p^5. The order of increasing orbital energy would be 3s, 3p. So the answer would be: [Ne]3s^23p^5
The arrangement of electrons within an atom is referred to as the "electronic configuration of an atom." With the help of the Aufbau principle, a sequence of energy levels for the electrons in an atom can be filled up or built up. In German, the word "aufbau" implies "building up."
According to this idea, orbitals are filled in a sequence of increasing energy. The lowest energy level is filled first. The higher energy levels are then filled one by one. Because it is the most stable, the atom is said to be in its ground state, sometimes referred to as the normal state.
The electron configuration of an element describes how its electrons are distributed throughout its atomic orbitals. Atomic subshells that contain electrons are placed in a series, and the number of electrons that each one of them holds is indicated in superscript for all atomic electron configurations.
For more questions like Orbital energy visit the link below:
https://brainly.com/question/15277801
#SPJ4
a river flows with a uniform velocity v. a person in a motorboat travels 1.52 km upstream, at which time a log is seen floating by. the person continues to travel upstream for 91 min at the same speed and then returns downstream to the starting point, where the same log is seen again. find the flow velocity of the river. assume the speed of the boat with respect to the water is constant throughout the entire trip. (hint: the time of travel of the boat after it meets the log equals the time of travel of the log.) answer in units of m/s
The uniform velocity of the log relative to the river is 3.04 km/182 min = 0.017 km/min.
What is speed?The pace and direction of an object or particle's movement are described by the vector quantity known as velocity. It consists of two elements: direction and speed.
motorboat is v + u
u is the speed
the person travels 1.52 km upstream
total distance covered by the motorboat is 1.52 km x (v + u).
The time taken by the person to travel upstream is 91 min. Therefore, the total time taken by the motorboat to cover the round trip (upstream + downstream) is 182 min.
total distance covered by the motorboat during the round trip is 3.04 km x (v + u).
the distance covered by the log during the round trip is also 3.04 km.
Therefore, the velocity of the log relative to the river is 3.04 km/182 min = 0.017 km/min.
To know more about uniform velocity visit:-
https://brainly.com/question/30352100
#SPJ4
A wheel of radius $a$ rolls along a horizontal straight line without slipping. Find parametric equations for the curve traced out by a point $P$ on a spoke of the wheel $b$ units from its center. As parameter, use the angle $\theta$ through which the wheel turns. The curve is called a trochoid, which is a cycloid when $b=a$
The position of point $P$ relative to the center of the wheel can be described as follows:
$x = a\theta - b\sin\theta$
$y = a - b\cos\theta$
$a$ is the radius of the wheel and $b$ is the distance of point $P$ from the center of the wheel. These equations define a trochoid. If $b = a$, then it becomes a cycloid.
About radiusThe radius is a circle is the line that connects the center point of the circle to a point on the circle. In a 3-dimensional sphere, the radius that connects the center of the ball to a point on the surface of the ball. The radius of a circle is half the diameter of the circle.
Learn More About Radius at brainly.com/question/30368475
#SPJ4