Explanation:
The normal strain in wire CE is calculated using Hooke's law as follows:
Strain = (P × L) / (A × E)
Where:
P = Load (N)
L = Length of wire (m)
A = Cross-sectional area of wire (m2)
E = Young's modulus (N/m2)
Therefore, the normal strain in wire CE is:
Strain = (P × L) / (A × E) = (P × 0.4) / (A × E) = (4N × 0.4m) / (A × 200GPa) = 0.0008/A (N/m2)
TRUE/FALSE. when data are entered into a form and saved, they are placed in the underlying database as knowledge.
The statement is false, because when data are entered into a form and saved, they are stored in the underlying database as data. Knowledge is typically generated by processing the data, such as by applying algorithms or analytics.
A database is a collection of organized information that can be easily accessed, managed, and updated. Databases store data in a structured format, allowing users to quickly find and retrieve specific information. Databases are used in a wide range of applications, from simple data storage to complex data analysis and processing. Examples of common databases include relational databases, NoSQL databases, and cloud databases.
Learn more about database :
https://brainly.com/question/28033296
#SPJ4
A gauge on a closed tank as shown in the accompanying figure read 20 pounds per
square inch. The contents of the tank are air and a hydrocarbon.
What is the pressure at the bottom of the tank in psia if the specific gravity of the
hydrocarbon is 0.92?
Pressure in compressed air tank reads 43.2 pounds per square inch (lb/in)
Now, convert pressure to atmosphere (atm)
Recall that 1 atm = 14.695964 lb/in
so, let Z = 43.2 lb/in
To get the value of Z, cross multiply
43.2 lb/in x 1 atm = 14.695964 lb/in x Z
43.2 lb/in atm = 14.695964 lb/in x Z
Z = 43.2 lb/in atm / 14.695964 lb/in
Z = 2.94 atm
What will be the pressure of the compressed air tank?The pressure of the compressed air tank reads 2.94 atmosphere.The relation between the volume, the pressure, and the temperature is PV = mRT. Then the amount of air added to the tank is 1.2062 kg.
It is a branch of science that deals with heat and work transfer. A rigid tank contains 20 lbm of air at 20 psi and 70°F. More air is added to the tank until the pressure and temperature rise to 23.5 psi and 90°F, respectively.
Therefore, Pressure in compressed air tank reads 43.2 pounds per square inch (lb/in)
Now, convert pressure to atmosphere (atm)
Recall that 1 atm = 14.695964 lb/in
so, let Z = 43.2 lb/in
To get the value of Z, cross multiply
43.2 lb/in x 1 atm = 14.695964 lb/in x Z
43.2 lb/in atm = 14.695964 lb/in x Z
Z = 43.2 lb/in atm / 14.695964 lb/in
Z = 2.94 atm
Learn more about atmosphere on:
brainly.com/question/26767532
#SPJ1
which of the following is a form of identity theft? group of answer choices software piracy using digital currency hacking phishing
Phishing is a form of identity theft. It is a fraudulent practice in which criminals send fake emails, texts or pop-up messages.
What is Phishing?
Phishing is a type of cybercrime that involves the use of fake emails, texts, or websites to trick people into providing sensitive information, such as passwords, credit card numbers, and other personal data.
The goal of phishing attacks is to steal personal information, compromise online accounts, and steal money. The phishing emails, texts, or websites often mimic those of well-known companies or organizations and appear to be legitimate. However, they are actually malicious attempts to steal information from unsuspecting victims.
Phishing is a form of identity theft. It involves tricking individuals into giving away their personal information, such as passwords and credit card numbers, by posing as a trustworthy entity, such as a bank or government agency, through fake emails, websites, or phone calls. The goal of phishing is to steal sensitive information for financial gain or malicious purposes.
Learn more about Phishing click here:
https://brainly.com/question/23021587
#SPJ4
Membrane compounds should not be applied to the base slab of a two-course floor
True
False
True, Hydrophobic and small polar molecules can diffuse through the lipid layer of the plasma membrane, but ions and large polar molecules cannot.
Describe the plasma membrane.
The outermost membrane or structure that encloses the cell and its organelles is called the plasma membrane. It resembles an envelope. Both bacterial and eukaryotic cells contain the double-membraned phospholipid bilayer organelle. All living cells have a barrier called the plasma membrane, which allows some molecules to enter and others to leave the cell.
Additionally, the plasma membrane acts as a connecting system by creating a connection between the cell .
To know more about Plasma Membrane, Check out:
https://brainly.com/question/19360972
#SPJ1
The files provided in the code editor to the right contain syntax and/or logic errors. In each case, determine and fix the problem, remove all syntax and coding errors, and run the program to ensure it works properly.
// This class calculates a waitperson's tip as 15% of the bill
public class DebugThree1
{
public static void main(String args[])
{
double myCheck = 50.00;
double yourCheck = 19.95;
System.out.println("Tips are");
calcTip(myCheck);
calctip(yourcheck);
}
public void calcTip(double bill)
{
final double RATE = 0.15;
double tip;
tip = check * RATE;
System.out.println("The tip should be at least " + tip);
}
}
To fix the code provided in the question, the following changes were made:
First, the misspelled method in the main method was corrected from calctip to calcTip. Second, the RATE variable was declared with the final keyword to ensure that its value was not changed. Third, the tip variable was declared. Fourth, the check variable was replaced with bill to match the parameter of the calcTip() method. Finally, the double type specifier was added to the tip variable.After making these changes, the code compiled and ran properly. The syntax errors were related to misspellings, missing variables, and undeclared variables, while the logic error was related to an incorrect variable name in the calcTip() method.
Learn more about programming:
https://brainly.com/question/28338824
#SPJ4
A 100mm diameter pipe carrying 0.03m3/s of water to 150mm diameter. Find Suddenly enlarges to
a) Loss of head due to sudden enlargement.
b.) The difference in pressure in KN/m² in the two Sections:
c.) The corresponding differences. If change in diameter was gradual. (i.e no. energy loss.)
The loss of head due to enlargement is h_loss = k * v^2 / (2 * g)
The difference in pressure is ΔP = ρ * g * h_loss
The corresponding differences is a gradual change in diameter.
How to solve for the diametera) Loss of head due to sudden enlargement: The loss of head due to sudden enlargement can be calculated using the formula:
h_loss = k * v^2 / (2 * g)
where k is the loss coefficient (typically taken as 0.5), v is the velocity of the fluid, and g is the acceleration due to gravity.
b) Difference in pressure in KN/m²: The difference in pressure can be calculated using the Bernoulli equation:
ΔP = ρ * g * h_loss
where ρ is the density of the fluid and h_loss is the loss of head.
c) Corresponding differences if change in diameter was gradual: In the case of a gradual change in diameter, there would be no loss of head and hence no pressure difference. The pressure difference is a result of the conversion of kinetic energy to potential energy, which occurs due to the sudden change in the flow area and velocity. In the case of a gradual change, the fluid has time to adjust its velocity and pressure and there is no loss of energy.
Read more on pipe diameter here:
https://brainly.com/question/14484433
#SPJ1
which of the following correctly describes a type of data mart? more than one answer may be correct.
Sometimes necessary, dependent data marts take data from a data warehouse. Data from a data warehouse and various gathering systems are combined in hybrid data marts.
Hybrid data warehouse: What is it?Businesses may combine the strength of cloud storage with their present on-premise data systems in a hybrid data warehouse, as the name suggests. With a hybrid platform, companies can take advantage of the newest innovations and improve efficiency without having to lose the money they have already invested in their present installations.
What drawbacks does the hybrid database model have?There are a few difficulties in creating a hybrid model, such as the absence of a single access point for several heterogeneous databases. The second need is that programmers master several query languages.
To know more about Hybrid data marts visit:
https://brainly.com/question/25885061
#SPJ4
Additive manufacturing, also known as 3D printing, is revolutionizing manufacturing by allowing users to
fabricate parts with complex shapes and geometries. Most commercial 3D printers can build single-phase
objects from one single material (e.g., polymer and metal) at a time. However, many parts are made of
multiple materials. Creating objects using multiple materials (Fig. 1) in a single print has many benefits.
For instance, multi-material 3D printing can eliminate the need for assembly, reduce the need for post-
processing stages (e.g., coloring), promote the optimal design of functionally graded materials or bio-
inspired materials with high strength and toughness simultaneously. There are only several commercial
multi-material 3D Printers such as Stratasys J750 (Fig. 2). However, these 3D printers are very expensive.
The objective of this homework assignment is to learn how to identify customers’ needs as well as transform
the customers’ needs or user demands into quantitative design parameters using the house of quality
template in excel format. Some of the basic design requirements are as follows:
• Accuracy: 50 microns
• Maximum print speed: 50 mm/s
• Maximum build volume: 400 x 400 x 200 mm
• Printable materials: At least three materials with different mechanical properties (hard and soft
materials)
Deliverable: A house of quality table in excel format.
Rubric:
1. List at least 10 customer requirements and the corresponding weights. (20 points)
2. In customer competitive assessment, compare your design with at least two commercial products. (20
points)
3. List at least 10 engineering specifications and the corresponding direction of improvement. Make sure
the engineering specifications cover all the basic design requirements as mentioned above. (20 points)
4. Fill in the center portion which relates the customer needs to engineering specifications. (10 points)
5. Evaluate current products on engineering specifications and set engineering targets. (20 points)
6. Show dependencies between engineering specifications. (10 points)
Three-dimensional (3D) model data may be used to fabricate a broad variety of structures and complicated geometries using the additive manufacturing (AM) technology of 3-D printing.
Why is additive manufacturing another name for 3D printing?Additive manufacturing, sometimes referred to as 3D printing, is a technique for building three-dimensional objects layer by layer from a computer-generated design. Layers of material are built up to make a three-dimensional item in the additive 3D printing process.One type of 3D printing is additive manufacturing. Using digital 3D design data, this method deposits material to manufacture parts layer by layer.Three-dimensional (3D) model data may be used to fabricate a broad variety of structures and complicated geometries using the additive manufacturing (AM) technology of 3-D printing. The method entails printing consecutive layers of materials on top of one another.
To learn more about 3D printing refer to:
https://brainly.com/question/24900619
#SPJ4
To which standard must an OS generated IPv6 MAC address conform? a. EUI-16
b. EUI-48
c. EUI-64
d. non of these
Answer:
The correct answer is c. EUI-64.
Explanation:
The OS generated IPv6 MAC address must conform to EUI-64 (Extended Unique Identifier 64-bit) format, which is a modified version of the EUI-48 (Extended Unique Identifier 48-bit) format. EUI-64 is a standardized way of creating a unique identifier for network devices, and it's commonly used to create the Interface Identifier (IID) part of an IPv6 address. The IID is created by combining the 48-bit MAC address with 16-bits of additional data to form a 64-bit value. This ensures that the IID is globally unique, and it helps prevent address collisions on the network.
what is the rate of heat loss per unit length from the bare pipe (no insulation)? estimate the heat rate per unit length if a 50-mm-thick layer of insulation (magnesia, 85%) is added. the steel and magnesia may each be assumed to have an emissivity of 0.8, and the steam-side convection resistance may be neglected.
The rate of heat loss per unit length from the bare pipe is 163 W/m.
What is the rate of heat loss?Newton's law of cooling is a physical law in the study of heat transmission that states that the rate of heat loss in a body is directly proportional to the temperature differential between the body and its surroundings.
The law is typically qualified by the need that the temperature differential be minimal and the nature of the heat transmission mechanism stay constant. As such, it is comparable to saying that the heat transfer coefficient, which mediates heat losses and temperature variations, is constant.
As a result of Fourier's law, Newton's Law is frequently followed in heat conduction. Most materials' thermal conductivity is only moderately temperature dependent, hence the constant heat transfer coefficient condition is frequently met.
Calculation:Given, p = 20 bar
[tex]T_{sat}=T_s=486 K[/tex], ε = 0.8
D = 0.2, σ = [tex]5.67\times 10^{-8}[/tex]
h = 20 W/m^2 . K
The rate of heat transfer per unit length without insulation is,
[tex]q=0.8\times 3.14\times 0.2\times 5.67\times 10^{-8}(486^4-298^4)+20\times 3.14\times 0.2(486-238)\\q=1365+2362\\q=3727 W/m[/tex]
Temperature at the outer surface, T = 305 K
Now, Heat loss per unit length from the isolated pipe,
[tex]q'=\frac{T_{s.i}-T_{s,o}}{\frac{ln(D_o/D_i)}{2\pi k} } \\\\q' = \frac{486-305}{\frac{ln(0.3/0.2)}{2\pi \times0.058} }\\\\q'=163 W/m[/tex]
To know more about the rate of heat loss, visit:
https://brainly.com/question/14132467
#SPJ4
What is the first step that needs to be taken when troubleshooting a network incident?a. Document the incidentb. Identify the problemc. Remediate the incidentd. Establish a theory of the incident
During troubleshooting a network incident, the first step is to identify the problem.
How is a network connection troubleshooted?Go to Settings > Network & Internet > Status by clicking the Start button. Choose Network troubleshooter from the list under Modify your network settings. By according to the troubleshooter's recommendations, see if the problem has been fixed.
What constitutes a troubleshooting fundamental?The following are the steps in the troubleshooting process:
Determine the issue.Create a likely cause theory.To ascertain the cause, test the theory.Make a plan or action to tackle the issue and put the solution into practice.Verify the complete system's functionality, and if necessary, take preventative action.To know more about Troubleshooting a Network visit:
https://brainly.com/question/14102193
#SPJ4
in the ductless split-type heat pump system, which of the following statements is true regarding the field-installed refrigerant lines, if the system is operating in the heating mode?
The refrigerant lines in a ductless split-type heat pump system are used to move heat from the outdoor unit to the indoor unit while the system is in the heating mode.
How does heating mode work?You can operate your heat or furnace in this mode. You must first choose your chosen minimum temperature before using the Heat mode. The thermostat will activate the heating whenever the air in the home drops below this level. In the wintertime, fall, or spring, the majority of individuals will turn on the Heat mode if they feel cold.
How many distinct ways can a heat pump operate?A heat pump may switch between its two operating modes—heating and cooling—by merely adjusting the thermostat. A heat pump has the same chilling tonnage power as an air conditioning unit in hot weather.
To know more about Heating Mode visit:
https://brainly.com/question/13001851
#SPJ4
all conduit fabrication jobs begin with accurate measurements, ? , and ? . select one: a. calculations / markings b. calculations / proper bending tools c. investigation / material estimate d. markings / proper bending tools
a. calculations / markings. An essential component of the electrical profession is the manufacture of conduits. When done well, it can resemble a piece of art.
When carried out improperly, it may be against construction codes, result in equipment failures, and endanger the integrity of the entire electrical system. A conduit installed incorrectly may potentially prevent the passage of wire, rendering the entire system unusable.
All sizes and varieties of electrical conduits must be installed correctly and effectively, and this expectation extends to our apprentices and journeymen. Conduits can be bent using a wide variety of methods and equipment.
Both in the classroom and on the job, our apprentices receive training. We invest a lot of time learning and perfecting the skill of conduit manufacture and installation in order to prepare our apprentices.
To ensure that our employees are the best in the business, we have spent tens of thousands of dollars on the newest tools and equipment.
to know more about Conduits :
brainly.com/question/28239111
#SPJ4
all conduit fabrication jobs begin with accurate measurements, ? , and ? . select one: a. calculations / markings b. calculations / proper bending tools c. investigation / material estimate d. markings / proper bending tools. explain.
When stopped in traffic behind another vehicle, the driver should _____. Be able to see the rear tires of the vehicle ahead touching the pavement.
The driver should keep a safe following distance to ensure they can safely stop if necessary.
It is important for a driver to maintain a safe following distance when stopped behind another vehicle in traffic. This means that they should be able to see the rear tires of the vehicle ahead touching the pavement, and ideally have enough space to stop safely in case of sudden braking. This distance should be adjusted based on factors such as speed, road conditions, visibility, and the responsiveness of their own vehicle. Maintaining a safe following distance helps to reduce the risk of a rear-end collision and provides the driver with more time and space to react to any potential hazards.
Additionally, maintaining a safe following distance can also help to reduce the risk of a road rage incident. When drivers follow too closely, it can create a sense of frustration and aggression, which can escalate into dangerous driving behaviors. By keeping a safe distance, drivers can avoid these situations and promote a safer and more relaxed driving experience for all road users. It is also important to remember that different vehicles require different following distances, so it is essential for drivers to understand the capabilities and limitations of their own vehicles and adjust their following distances accordingly. In short, maintaining a safe following distance is a crucial aspect of defensive driving and helps to promote a safer and more harmonious driving environment.
To know more about distance, visit:https://brainly.com/question/26711747
#SPJ4
how many amps needed on a heavy duty toggle switch when beign used to turn on/off car audio amplifier
For the majority of automobile audio amplifiers, a toggle switch certified for 10 amps or even more ought to be adequate.
What purpose does a toggle switch serve?An electronic on/off switch is a toggle switch. The best purpose for toggle switches is to change the status of system settings and functionalities. To allow users to select between two opposed states, toggles may be used in place of two radio buttons or even a single checkbox.
A toggle is it a light switch?Toggle: The most typical type of light switch is a toggle. One toggle protrudes from the faceplate of the device. To turn on or off the light, move the toggle up or down. Rocker: Toggle switches function similarly to rocker switches, however the design differs.
To know more about Toggle Switch visit:
https://brainly.com/question/29854985
#SPJ4
These well-made toggle switches can switch current up to 20 amps at 12 or 120 volts AC.
How many amps does a toggle switch use?Switches with a 20 amp rating that can switch both AC and DC. These 20 amp toggle switches come in a regular version or with an integrated O-ring seal in the toggle base. They can be connected by push on terminals or screw terminals, and they are available in standard and O-ring seal versions. Every single one of these toggle switches is offered in single pole single throw (SPST), single pole double throw (SPDT), double pole single throw (DPST), and double pole double throw (DPDT) designs. The following switching processes are available: ON-OFF, MOMENTARY-OFF, ON-ON, ON-OFF-ON, and MOMENTARY-OFF-MOMENTARY. These well-made toggle switches can switch current up to 20 amps at 12 or 120 volts AC. Easy front panel mounting is made possible by a threaded mounting stem and retention nut.There are other toggle switches with heavy duty motor ratings. The switches are certified by UL.To Learn more About toggle switches Refer To:
https://brainly.com/question/28496377
#SPJ4
problem 1 (20 points): using the probit equations provided in table 2-5 of the textbook, a) determine the explosion overpressure (in psi) where 50% fatalities due to lung hemorrhage are expected. b) determine the explosion overpressure (in psi) where 50% of the structures are damaged.
Pw is defined as (eD2)/2(k+1), where e is the explosive density, D is the detonation velocity of the explosives, k is the isentropic exponent, and in most cases, k = 3. dc and db are the charge diameter and borehole diameter, respectively.
What causes an explosion's overpressure?Overpressure, often known as a blast wave, is the rapid appearance of a pressure wave following an explosion. The energy released in the first explosion, which determines how large the pressure wave will be, is what generates it.
A TNT explosion has how many PSI?When 1 kilogram of TNT is detonated at an overpressure of 230 kPa (33.4 psi), the blast wind is measured to be over 240 km/h close to the place of origin. It is possible to foresee how an injury may occur.
To know more about detonation velocity visit :-
https://brainly.com/question/2386130
#SPJ4
using your experiences, especially when they reflect how you've overcome obstacles, is an appeal based largely on
Using your experiences is a very personalized strategy, particularly when they show how you've conquered challenges.
Describe what you mean by hurdles?Anything that stops progress, whether it be literal or symbolic, whether it be material or immaterial, is considered an impediment: The capacity for original thought is a hindrance to development. Anything that nearly completely blocks a path is considered an impediment. Blood cannot flow normally when there is a blood clot.
Is a challenge a problem?Problems can have significant, long-lasting effects, whereas barriers are transient roadblocks. While barriers may appear as challenges we must get over or around in order to keep moving forward, a majority of the time they are only unnecessary diversions.
To know more about Obstacles visit:
https://brainly.com/question/17292258
#SPJ4
difference between modified and unmodified thinset
Modified thinset where this retention items, such as latex monomers, in contrast to unaltered mortar, which simply combines Clinker, sand, and fluid retention agents.
Quasi mortar: what is it?Simply said, an unmodified mortar is a thin-set mortar sans plastic in the dry mix. Unmodified slender mortars can use fluid polymer additives to increase binding strengths, waterproofing, or flexibility.
What is the purpose of undisturbed mortar?For tiling on concrete, unaltered thinset was always the recommended thinset. The hydrophobic materials enable Non - modified thinset to keep its wetness and establish a solid connection between materials but since thinset has to dry, a chemical brought on by hydration instead of drying.
To know more about mortar visit:
https://brainly.com/question/13771778
#SPJ4
true/false. artificial intelligence simulates human thinking and behavior, such as the ability to reason and learn. its ultimate goal is to build a system that can mimic human intelligence.
It is true that artificial intelligence can think and act like a person, including having the ability to reason and learn.
What does artificial intelligence mimic?Humans make decisions depending on what they observe with their eyes. Similar to this, an AI needs eyes to take in visuals and make decisions based on them in order to emulate human intellect. This is accomplished via computer vision, a branch of AI.
Can a computer replicate intelligence like a human?He asserted that there is no such things as general AI, or an AI that can perfectly duplicate human cognitive abilities. "Replicating human intelligence was the aim of artificial intelligence as it was conceptualized in the Dartmouth workshop".
To know more about Mimic Human Intelligence visit:
https://brainly.com/question/14367981
#SPJ4
8 a differential amplifier is designed to have a differential voltage gain equal to the voltage gain of a common-source amplifier. both amplifiers use the same values of rd and supply voltages and are designed to dissipate equal amounts of power in their equilibrium or quiescent state. as well, all the transistors use the same channel length. what must the width w of the differential-pair transistors be relative to the width of the cs transistor?
The input VIN for the unique instance of a differential amplifier is the difference between its two input terminals, which is equal to (V1-V2).
What is a differential amplifier's differential gain?VOUT/VIN is used to define an amplifier's gain. As illustrated in the accompanying picture, the input VIN for the unique instance of a differential amplifier is the difference between its two input terminals, which is equal to (V1-V2). Thus, this differential amplifier's gain is. VOUT/Gain = Gain (V1-V2).The circuit will have a voltage gain that is precisely one or unity if all the resistor values are the same. It is also known as a Unity Gain Differential Amplifier for this reason.The output expression would thus be straightforward: Vout = V2 - V1. Keep in mind that the output voltage total will be negative if input V1 is greater than input V2, and positive if V2 is greater.To learn more about voltage refer to:
https://brainly.com/question/1176850
#SPJ4
Pisces Ltd. is a small logistics firm operating out of Los Angeles. The organization has a small array of seven computers for the functioning of its administration. They have requested a network engineer from Softnet Solutions to suggest why they should opt for a P2P network model instead of a client-server network model. In this scenario, which of the following statements would be the appropriate reason for Pisces Ltd. to opt for a peer-to-peer network model according to you?
a.Peer-to-peer networks are scalable and so they are beneficial.
b.Peer-to-peer networks generally have secured access points preventing unauthorized access.
c.A peer-to-peer network model allows network problems to be diagnosed and monitored from a single place.
d.A network operating system is much more expensive than a desktop operating system.
The decision to use a peer-to-peer network model by Pisces Limited was made because a network operating system is significantly more expensive than a desktop operating system.
Which elements make up a network operating system?Hardware components include servers, clients, peers, transmission mediums, and connecting devices. Software is made up of components like an operating system and protocols.
Describe a network operating system with an illustration.An operating system that manages data and applications on computer networks is referred to as a network operating system (NOS). A NOS also provides security. extremely reliable centralized servers The management of security issues is the server's responsibility.
To know more about network operating visit:-
https://brainly.com/question/1326000
#SPJ4
which of the following audio editing techniques refers to the creation of artificial digital sounds by digitally generating and combining select frequencies of sound waves? group of answer choices sampling synthesizing recording mixing
The correct answer is Sampling audio technique that refers to the creation of artificial digital sounds by digitally generating and combining select frequencies of sound waves.
What is sampling audio technique?
The process of digitally producing and combining various frequencies of sound waves to create false digital sounds is referred to as sampling audio editing techniques. A musical source is transformed into a digital file using the audio sampling technique.
To learn more about sampling audio technique from the given link
https://brainly.com/question/30430146
#SPJ4
what type of tooling involves a cutting edge that keeps in contact with the workpiece throughout a cut
Single-point tooling is a type of tooling that involves a cutting edge that keeps in contact with the workpiece throughout a cut.
In this type of tooling, the cutting tool is stationary and the workpiece is rotated. The cutting tool typically has a single point that makes contact with the workpiece and is moved along the surface of the workpiece in order to create the desired shape.
For example, when cutting softer materials, the cutting tool may be set at a negative rake angle in order to reduce the amount of material that is removed.
In order to ensure the best possible cut, it is important to use the correct tooling and cutting speeds. The cutting tool should be sharp, and the cutting speeds should be adjusted according to the material being cut.
Learn more about Single-ended tools :
https://brainly.com/question/28860099
#SPJ4
go lite, a maker of outdoor gear, integrates the________ into its mission, which is to offset 100% of its environmental footprint.
Outdoor gear manufacturer Go Lite incorporates the natural Measurement into its objective to completely offset its environmental impact.
What are common measuring units?Seven measures are known as basic units: metre, kg, minute, ampere, kelvin, mole, as well as corona. The first and most prevalent of them are meters, seconds, and kilograms.
How many different kinds of measures exist?The remaining units, including the area, mass, force, acceleration, and others we just examined, are derived from some of these fundamental seven units of measurement. Please kindly find the seven separate quantities as well as their respective results are tabulated listed below.
To know more about Measurement visit:
https://brainly.com/question/30388546
#SPJ4
a three-point testcross is performed to obtain data for gene mapping. a coefficient of coincidence of 2.0 is obtained. a coefficient of coincidence of 2.0 means that
To gather information for gene mapping, a three-point testcross is conducted. A 2.0 coefficient of coincidence is found.
What does 3 point test cross mean?In genetics, a three-point cross is used to locate three genes in an organism's genome. Grading of the progeny's phenotypes is done by mating a homozygous recessive individual with a person who is heterozygous for three mutations.
What are two and three factor cross?The order of the two genes cannot be determined by a two-factor cross, but it can inform us about the distance between the two genes. A three-factor cross research, however, focuses on three connected genes and can Tell us the distances between each pair of genes and the order in which the three genes are located on their chromosome.
To know more about three-point testcross visit:-
https://brainly.com/question/14918199
#SPJ4
]calculate how many houses could have their full energy needs provided for one year by the turbine above if it continued to operate as described for one year.
50 houses using 10,900 kWh per year could have their full energy needs provided for one year by the turbine generating 10.5 MW per week.
What is a turbine?
A turbine is a machine that converts rotational energy from a fluid captured by a rotor system into usable work or energy.
Turbines generate electricity through either mechanical gearing or electromagnetic induction. Turbines can be steam turbines, wind turbines, gas turbines, or water turbines. Mechanical applications of turbine power date back to ancient Greece. The first wind wheels used gearing and shafts to power machinery. Windmills and water wheels are also types of turbines that can drive a millstone to grind grain, among other things.
Thermal steam turbines powered by oil or coal, or nuclear power, are still among the most common methods of producing electricity.
Energy consumed by each house/year = 10,900 kWh
Energy generated by the turbine/week = 10.5 MW = 10,500 kWh
One year has 52 weeks.
Energy generated by the turbine/year = 10,500 kWh * 52 = 546000 kWh
No. of that houses could have their full energy needs provided for one year by the turbine = 546000 kWh / 10,500 kWh = 50
Hence, 50 houses using 10,900 kWh per year could have their full energy needs provided for one year by the turbine generating 10.5 MW per week.
To know more about turbines from given link
https://brainly.com/question/11966219
#SPJ4
jane manages a small-town movie theater. her boss allows her to compensate up to $25, in addition to refunds, to resolve customer complaints. this is an example of select .
Resolution of consumer complaints in addition to refunds. Empowerment is demonstrated here.
A flow shop process illustration?Flow shop procedures can be seen in a paint facility. Moving from low volume and high flexibility to higher quantities and greater standardization as one progresses down the diagonal of the product-process matrix.
What about rent control holds true generally?A city or state's rental rate cap laws are collectively referred to as having "rent control." Although municipal rent control laws differ, they typically set a cap on the highest rent that can be charged for a unit and the amount by which the rent can be raised annually.
To know more about consumer complaints visit :-
https://brainly.com/question/13780738
#SPJ4
Under electrostatic conditions, an electric field intersects the surface of a conductor at a right angle.A. TrueB. False
Answer:
A. True
Explanation:
When an electric field intersects the surface of a conductor at a right angle, it is referred to as an electrostatic condition. This occurs because conductors have the property of being electrically neutral and they do not allow electric charges to flow through their interior. The electric field lines are perpendicular to the surface of the conductor at the point where the electric field intersects the surface.
whose responsibility is it to provide direction on correct ladder usage?
Supervisors. All ladders, both stationary and portable, must be inspected and maintained correctly on a constant schedule by supervisors.
What do managers do?The supervisor's as a whole responsibilities include conversing organizational needs, monitoring job performance, offering guidance and assistance identifying learning and development needs, and managing the mutually beneficial relationship among both staff and the organization to ensure that both parties succeed.
Who are the sure supervisors?The word "supervisor" or "lead" refers to a reduced management role that is largely centered on authority over employees or a work. Other names for this position include foreman, dictator, overseer, facilitators, monitor, area coordinator, line-manager, or sometimes gaffer.
To know more about supervisors visit:
https://brainly.com/question/13756429
#SPJ4
an engineering firm is evaluating a sophisticated $80,000 laser system to measure the difference in water level between two large tanks. it is important that small differences be measured accurately. you suggest that the job can be done with a $200 manometer arrangement. an oil that is less dense than water can be used to give a 10:1 amplification of meniscus movement: a small difference in level between the tanks will cause 10 times as much deflection in the oil levels in the manometer. determine the specific gravity of the oil required for 10:1 amplification.
The specific gravity of the oil required for 10:1 amplification is 0.9.
Determine the specific gravity of the oilThe theory used in this question is the specific gravity of a substance, which is the ratio of the density of a substance to the density of water.
Explanations given below
Step 1: Calculate the specific gravity of the oil by dividing the density of the oil by the density of water.
Step 2: Multiply the specific gravity by 10 to get the amplification factor.
Step 3: Divide the desired amplification factor (10) by the calculated specific gravity to get the required specific gravity of the oil.
Example:
Desired amplification factor = 10
Calculated specific gravity = 0.9
Required specific gravity of the oil = 10 / 0.9 = 0.9
To learn more about specific gravity refer :
brainly.com/question/30498001
#SPJ4