If Mary points her boat north, the distance Mary will reach the other shore is 70.59 m.
The time required is,
t = 190 m/3.5 m/s
t = 54.3 seconds
Mary's time will also be displaced in the east.
x = (1.3 m/s) (54.3 s)
x = 70.59 m
Your question is incomplete but most probably your full question was:
Mary needs to row her boat across a 190 m-wide river that is flowing to the east at a speed of 1.3 m/s. Mary can row at a speed of 3.5 m/s. part an if Mary points her boat due north, how far from her intended landing spot will she be when she reaches the opposite shore?
Learn more about calculating the distance at https://brainly.com/question/26046491
#SPJ1
a cd has diameter of 130 millimeters. when playing audio, the angular speed varies to keep the linear speed constant where the disc is being read. when reading along the outer edge of the disc, the angular speed is about 220 rpm (revolutions per minute). find the linear speed.
The linear speed of the cd is 353.8 m/s. The result is obtained by using the equation of angular speed in relation to linear speed.
What is angular speed?An angular speed is a speed of an object in rotational motion. The angular speed in relation to linear speed is
ω = vr
Where
ω = angular speedv = linear velocityr = radius of a circleA cd is in a rotational motion. It has angular and linear speed.
Diameter, d = 130 mmAngular speed, ω = 220 rpmFind the linear speed!
The radius of the cd is
r = ½d
r = ½(130) mm
r = 65 mm
r = 0.065 m
We change the unit of angular speed to rad/s.
ω = 220 rpm
ω = 220 × 2π/60 rad/s
ω = 7.33π rad/s
The linear speed will be
ω = vr
7.33π = v(0.065)
v = 23/0.065
v = 353.8 m/s
Hence, the cd has the linear speed of 353.8 m/s.
Learn more about angular speed here:
brainly.com/question/30435735
#SPJ4
a block with mass rests on a wedge with mass and angle which lies on a table, as shown in the figure. all surfaces are frictionless. the block is constrained to move vertically by means of a wall on its left side. what is the acceleration of the wedge?
The acceleration of the wedge is found to be N1 sinФ + N-mg- N1cosФ /m.
What is the simple acceleration equation?The equation a = v/t denotes acceleration (a), which refers to the change in velocity (v) over the change in time (t). This lets you to determine the change in velocity in metres per second squared (m/s2). Although acceleration is a vector quantity, both its magnitude and its direction are all included.
When mass of block M is greater than mass of wedge m:
N1 => normal force act between block and wedge
a=> acceleration of the wedge
Hence, the force equation would be:
The wedge makes an angle Ф with the ground
N - mg - N1cosФ = 0
N1 sinФ = ma
a => N1 sinФ + N-mg- N1cosФ /m
Free fall of a block on a wedge is what?When a body is just exposed to gravity, it is in free fall. In this scenario, the wedge's normal force and gravitational force are the forces that act on the block. As a result, when the wedge's normal force is zero, the block will be dropping freely.
Learn more about acceleration here:
brainly.com/question/16960141
#SPJ4
ssume that the brakes in your car create a constant deceleration, regardless of how fast you arc going. if you double your driving speed, how does this affect (a) the time required to come to a stop, and (b) the distance needed to stop?
(a) If you double your driving speed, time required to come to a stop will be halved (b) the distance needed to stop will be quadrupled.
What is deceleration?Deceleration is defined as a decrease in velocity. Deceleration is slowing down. Negative acceleration is acceleration in the negative direction in the coordinate system. Negative acceleration may/ may not be deceleration and deceleration may /may not be negative acceleration.
If the brakes in a car create a constant deceleration, then time required to come to a stop is directly proportional to velocity, while the distance needed to stop is proportional to square of the velocity. So, if you double your driving speed, the time required to come to a stop will be halved, while the distance needed to stop will be quadrupled.
To know more about deceleration, refer
https://brainly.com/question/75351
#SPJ4
How fast would an object with a mass of 100kg need to be going to hit the previous mass head on and come to a complete stop?
The required velocity of mass 100 kg is 3.75 m/s.
What is the required velocity of the mass 100 kg?
The required velocity of mass 100 kg is determined by applying the principle of conservation of linear momentum as follows;
This principle states that in an isolated or closed system, the sum of the initial momentum of an object is equal to the sum of the final momentum.
momentum of the 100 kg mass = momentum of 150 kg mass
100 kg x v = 150 kg x 2.5 m/s
v = ( 375 kg m/s ) / ( 100 kg )
v = 3.75 m/s
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
The complete question is below:
A mass of 150 kg is moving 2.5 m/s. How fast would an object with a mass of 100kg need to be going to hit the previous mass head on and come to a complete stop?
lying flat on your stomach at the top of a cliff, you reach out level with the top of the cliff and drop a rock from rest. after 4.5 seconds the rock hits the bottom of the cliff. what is the height of the cliff in meters?
The height of cliff is 99.225 m.
The initial speed of rock is 0, it starts from rest.
The time taken is 4.5 seconds.
The acceleration is -g, as the rock is freely falling.
Distance travelled by the rock is the height of the cliff.
Using second law of Newton,
s= ut + 0.5 a t²
where s is the distance,
u is the initial speed,
a is the acceleration,
and t is the time.
s = 0 + 0.5(9.8)(4.5)(4.5)
s = 99.225 m
To know more about the Newton's second law of motion, here
brainly.com/question/13447525
#SPJ4
Red light has a wavelength of 6.80x102 nm. The energy of a photon of Red light is (in J) ?
The energy of a photon of Red light is found to be [tex]2.92 \times 10^{-19}J.[/tex]
Is the energy of a photon the same as its momentum?Photons have momentum, which is determined by the equation p=h, where h is the planck's constant. The momentum and energy of photons are correlated by the formula p=Ec, where E=hf=hc.
What is a photon?A photon is a microscopic particle of electromagnetic energy that resembles a light particle. The photon's energy is influenced by its frequency. Photons are essentially electric fields traveling through space. Photons have no charge and no rest mass, and they move at the speed of light. Because a photon has no mass, its kinetic energy is the same as its total energy.
[tex]E = \frac{hc}{\lambda}[/tex]
h= Planck's constant =[tex]6.626 \times 10^{-34} Joule-sec[/tex]
c= Speed of light = [tex]3 \times 10^{8}m/s[/tex]
λ =[tex]6.8\times 10^{2} \times 10^{-9}m[/tex]
E = [tex]6.626 \times 10^{-34} times 3 \times 10^{8}/ 6.8 \times 10^2 \times 10^-9 = 2.92\times10^{-19}J[/tex]
Learn more about photon here:
brainly.com/question/30107923
#SPJ4
What happen to the force, if one masses is doubled, the other remains unchanged, and the distance of separation is tripled ?
The power of attraction will also double if the mass of one object doubles. But the tripled separation distance more than makes up for this impact. The force would be 9 times less when the distance was tripled (32).
What is Distance?Distance is the sum of an object's movements, regardless of direction. Distance can be defined as the total distance travelled by an object. An illustration. If an automobile drives 5 km east, then turns and drives 8 km further north, the total distance driven by the car is 13 km.
What is called distance and displacement?Distance is the length of an object's real route in its entirety. The displacement of an object between two points is defined as the straight line (shortest) distance between those two points when directed from one position to another. The metre is the SI unit for measuring distance and displacement (m). Displacement is just the distance between an object's starting point and its final location, whereas distance is the length of an object's path.
To know more about Distance visit:
https://brainly.com/question/13034462
#SPJ4
true or false. According to the law of conservation of momentum, the total momentum of an isolated system is constant.
The required statement about law of conservation of momentum is true.
Explain law of conservation of momentum.According to the law of conservation of momentum, The overall momentum of two or more bodies acting on one another in an isolated system stays constant unless an external force is introduced. As a result, momentum cannot be gained or lost.
According to question:True. The law of conservation of momentum states that the total momentum of an isolated system remains constant, unless acted upon by an external force. This means that the total momentum of a system, consisting of multiple objects in motion, will remain the same unless a net force is applied to the system.
The law is a fundamental principle of classical mechanics and is widely used to explain the behavior of physical systems, including collisions and other interactions between objects.
The law of conservation of momentum is an expression of the fact that momentum is a conserved quantity in an isolated system, meaning that it cannot be created or destroyed, only transferred from one object to another.
To know more about conservation of momentum visit:
brainly.com/question/3920210
#SPJ4
a meteroid is traveling east through the atmosphere at 18.3 km\s while descending at a rate of 11.5 l,\s. what is its speed
The meteoroid is traveling at a speed of 18.48 km/s.
The speed of the meteoroid is the vector sum of its eastward velocity (18.3 km/s) and its downward velocity (11.5 km/s). To calculate this, we can use the Pythagorean theorem:
Speed = √(18.3 km/s)² + (11.5 km/s)² = √(341.09 km²/s²) = 18.48 km/s
Therefore, the meteoroid is traveling at a speed of 18.48 km/s.
Speed is a measure of how quickly an object is moving in a certain direction. It is usually expressed in terms of distance traveled per unit of time, such as meters per second or miles per hour. Speed is the magnitude of velocity, which is the rate of change of an object's position in a particular direction. It is a scalar quantity, meaning that it has no direction associated with it.
Learn more about speed:
https://brainly.com/question/13943409
#SPJ4
a boy stands daydreaming as his friend runs by at the constant speed of 3.92 m/s. after 1.11 s, the boy decides to chase his friend and accelerates uniformly at 2.08 m/s2. assuming motion along a straight line, how far does the boy travel before he catches his friend?
The distance the child covered before catching up to his friend was 0.7 metres.
To find the distance the boy travels before he catches his friend,
we need to calculate the position of the boy as a function of time.
The velocity of the boy can be calculated as the sum of his initial velocity (0 m/s) and his acceleration multiplied by time:
v = at = (2.08 m/s^2) * (1.11 s)
= 2.3 m/s
The position of the boy as a function of time can then be calculated using the following equation:
x = x0 + v0t + (1/2)at^2
Where x0 is the initial position of the boy (assumed to be 0),
v0 is the initial velocity of the boy (0 m/s), and
t is the time elapsed (1.11 s).
Plugging in the values, we get:
x = (1/2)(2.08 m/s^2)(1.11 s)^2
= 0.7 m
So the boy has traveled 0.7 meters before he catches his friend.
For such more question on distance
https://brainly.com/question/26550516
#SPJ4
what will happen if the positive and negative connections on the voltmeter are reversed?
pressure units named for the inventor of the barometer
It is frequently used to denote one millitorr (mTorr), also known as 0.001 Torr, in metric units. Evangelista Torricelli, the Italian physicist and mathematics who established the barometer's operating principle in 1644.
What is the purpose of a barometer?An device known as a barometer is used to determine atmospheric pressure, also known as barometric pressure. The air layers that surround Earth are known as the atmosphere.
What can you infer from a barometer reading?Weather forecasts are made using barometers. An air pressure gauge, or barometer When the barometer reads "rising," the air pressure is rising; when it reads "falling," the air pressure is lowering.
To know more about Barometer visit:
https://brainly.com/question/17166380
#SPJ4
is the normal force on an object equal to its mass times gravity? group of answer choices yes, always sometimes no, never
M represents the mass of the object that is sliding, g is the velocity caused by gravity, and is the angle of inclination. The product of gravity weight and the sine of the inclination angle is the normal force, or FN.
Do all objects experience the same level of gravity?Higher mass objects are subject to stronger gravity. Gravity lessens as distance increases as well. As a result, the closer two objects are to one another, the stronger their gravitational pull is. The Earth's mass is what generates gravity.
There is no force like gravity.The force of the spring, which the mass is subjected to when it is raised, is opposite and equal to the force of gravity. We can then conclude that the springs is equivalent to and resists the gravitational force because mass would otherwise be pulled by the net force.
To know more about velocity visit:
https://brainly.com/question/18084516
#SPJ4
a race car completes a lap on a 1600 m long track with an average speed of 250 km/h. if the car's average speed on the first half of the track was 210 km/h, what was its average speed on the second half?
The average speed on the second half of the track would be 290 km/h.
This can be calculated by dividing the total distance of 1600 m by the total time it took the car to complete the lap. Since the car's average speed on the first half of the track was 210 km/h, the total time it took to complete the entire lap would be 1600 m / (210 km/h x 1000 m/km) = 7.62 seconds.
Therefore, the average speed on the second half of the track would be 1600 m / (7.62 seconds x 2) = 290 km/h.
Speed is a scalar quantity that refers to the rate of motion of an object, measured in distance units per time units. It is the magnitude of the velocity vector, which is the rate at which an object changes its position in a given direction.
Learn more about average speed:
https://brainly.com/question/3841552
#SPj4
Sarah is building an electric motor whilst listening to
the radio. She notices that when she switches the
motor on, the radio makes clicking noises. Using
knowledge about how radio waves are produced,
state why the radio makes clicking noises.
The radio makes clicking noise due to distortion of radio wave.
What is distortion of wave?Distortion in signal processing is the modification of a signal's original form (or other feature). It refers to the modification of the waveform of an information-carrying signal in an electronic device or communication channel, such as an audio signal representing sound or a video signal representing images.
Because distortion is typically undesirable, engineers work to eliminate or reduce it. However, distortion could be desired in specific circumstances.
Learn more about distortion here:
https://brainly.com/question/13626015
#SPJ1
a 1325 kg car, c, moving north at 27.0 m/s, collides with a 2165 kg car, d, moving east at 11.0 m/s. the two cars are stuck together. in what direction and with what speed do they move after the collision?
Answer:
To find the direction and speed of the two cars after the collision, you need to perform a momentum analysis. The momentum of the two cars before the collision can be calculated as follows:
Momentum of car c = 1325 kg * 27.0 m/s = 35725 kg m/s (north)
Momentum of car d = 2165 kg * 11.0 m/s = 23815 kg m/s (east)
The total momentum of the two cars after the collision is equal to the sum of their momenta before the collision. This is a vector sum, which can be represented by an arrow pointing in the direction of the total momentum.
The final velocity of the two cars can be found by dividing the total momentum by the total mass.
Total momentum = 35725 kg m/s + 23815 kg m/s = 59540 kg m/s
Total mass = 1325 kg + 2165 kg = 3490 kg
Final velocity = Total momentum / Total mass = 59540 kg m/s / 3490 kg = 17.0 m/s
This velocity is directed somewhere between north and east. The exact direction and speed of the two cars after the collision depends on their initial positions and orientation, which are not specified in the question.
bluetooth headsets use microwave radiation with a wavelength of 12.04 cm. what is the frequency of this electromagnetic radiation (s -1 )?
The frequency of an electromagnetic wave is calculated using the formula f = c/λ, where c is the speed of light (2.9979 x 10^8 m/s) and λ is the wavelength (12.04 cm).
Therefore, the frequency of the microwaves emitted by a Bluetooth headset is 2.48 x 10^10 s-1.
The microwaves emitted by a Bluetooth headset are part of the electromagnetic spectrum, which is divided into different frequency bands. The microwaves used by Bluetooth headsets are in the ISM (Industrial, Scientific and Medical) band, which is specifically designed for devices that do not interfere with other communication systems or cause significant interference or harm.
The ISM band is located between 2.4 and 2.5 GHz, and the exact frequency of the microwaves emitted by a Bluetooth headset may vary slightly depending on the specific model.
Learn more about electromagnetic radiation:
https://brainly.com/question/1408043
#SPJ4
unpasteurized fruit juice can be contaminated if there are pathogens in or on the fruit used to make it. T/F
It is untrue to say that unpasteurized fruit juice could be polluted if the fruit used to prepare it contains or is in contact with germs.
What is an example of contaminate?Chemicals had been used to contaminate [=pollute] the water. Take care to prevent bacterial contamination of the wound. Avoid touching the microchip as your hands' oil will taint it. Make sure that no other color have gotten on the white paint.
How does contamination happen?Food preparation on a place that still has residues on it or the use of cleaning agents in close proximity to exposed food can both result in contamination. Before food even enters the kitchen, it may become polluted by chemicals.
To know more about contaminated visit:
brainly.com/question/8482936
#SPJ4
how far from a 1.00- micro c point charge is the potential 100v? at what distance is it 2.00x10^2 v?
When the potential is 100 V, the distance from the charge is 90.0 m. When the potential is 2.00 × 10² V, the distance will be 45.0 m. The result is obtained by using the formula for electric potential.
What is electric potential?The electric potential is the amount of work energy required to move a charge from one point to another point in an electric field. It can be expressed as
V = kq/r
Where
V = electric potential (V)k = Coulomb constant (9 × 10⁹ Nm²/C²)q = charge (C)r = distance of separation (m)We have a charge with
q = 1.00 μCFind the distance if the electric potential is 100 V and 2.00 × 10² V!
Using the formula above, we get the distance.
V = kq/r
When the potential is 100 V,
V = kq/r
100 = (9 × 10⁹ × 1.00 × 10⁻⁶)/r
r = (9.00 × 10³)/100
r = 90.0 m
When the potential is 2.00 × 10² V,
V = kq/r
2.00 × 10² = (9 × 10⁹ × 1.00 × 10⁻⁶)/r
r = (9.00 × 10³)/(2.00 × 10²)
r = 4.50 × 10¹ m
r = 45.0 m
Hence, the distances if the electric potential is 100 V and 2.00 × 10² V are 90.0 m and 45.0 m, respectively.
Learn more about electric potential here:
brainly.com/question/16267680
#SPJ4
fozzie is looking in a 10-cm-tall fragment of a mirror (hanging vertically) at his dog food bag behind him, which just fills the vertical extent of the mirror. he knows that his dog food bag is 0.5 meters tall and he is 0.25 meters from the mirror. how far behind fozzie is his dog food bag? (use fozzie's eyes as the reference point for distances.)
dog food bag behind him in a 10-cm-tall fragment of a mirror. He knows his dog food bag is 0.5 meter's tall and he is 0.25 meter's away from the mirror. Fozzie's dog food bag is x=0.75m behind him.
given,
height of the mirror,h=10cm=0.1m
the distance between the observer and mirror S₁=0.25
height of the dog food bag, H=0.5m
in ΔOAB and ΔA¹B¹
OA/OA¹=h/H=AB/A¹B¹
S₁/ S₁+S₂=h/H
0.25/0.25+S₂=0.1/0.5
S₂=1m
the position of bag behind fozzie
x=S₂-S₁
x=1-0.25 m
x=0.75m => behind fozzie
A portion that has been severed or separated from another object is known as a fragment. The term "fragment" typically refers to a part that has broken off rather than one that has been softly or purposefully detached, as in The vase was smashed into a million fragments. A bone fragment is a piece of a bone that has been chipped off, often in a minor amount. Another definition of the word "fragment" is "a section or portion of something that is incomplete or separated from the total," such as a scene from a film or a musical composition. The word "fragment" can also refer to a portion, little, or scrap (regardless of whether it has been removed from a larger part).
Learn more about fragment here:
https://brainly.com/question/2034985
#SPJ4
a positive test charge is placed at the center of a spherical gaussian surface. what happens to the net flux through the gaussian surface when the surface is replaced by a cube of the same volume whose center is at the same point? select all that apply
When the Gaussian surface is replaced with a cube of the same volume with the same center, the net flow across the surface remains constant.
What is gaussian surface?The Gaussian surface is a closed surface in three-dimensional space that may be used to compute the flux of a vector field. These vector fields might be gravitational fields, electric fields, or magnetic fields. A Gaussian surface is a three-dimensional enclosed surface used to calculate the flux of a vector field (gravitational field, the electric field, or magnetic field.) The Gaussian surface facilitates in calculating the intensity of the electric field gently due to the evenly dispersed charge. Any hypothetical closed surface's net electric flux is equal to 1/0 times the net electric charge enclosed inside that closed surface. The closed surface is also known as the Gaussian surface.
Here,
The net electric flux through any closed surface is proportional to the charge enclosed within the surface. Since the volume enclosed by both the spherical Gaussian surface and the cube is the same, the charge enclosed is also the same, and thus the net flux remains constant.
To know more about gaussian surface,
https://brainly.com/question/14810497
#SPJ4
an automobile manufacturer claims that its product will, starting from rest, travel 0.40 km in 9.0 s. what is the magnitude of the constant acceleration required to do this?
The speed change over time is measured by the size of the velocity vector along the path. The centripetal force as it circles the instant radius of curvature is the size of the acceleration vectors normal to the path (t).
What are magnitude and its definition?Formulas for a vector's magnitude Magnitude Formula for just a Vector with the Origin as the End Point. Magnitude Formula for just a Vector when (x1, y1) and (x2, y2) are the starting and ending points | v | = (x 2 + x 1) 2 + (y 2 + y 1) 2.
What is the magnitude?In order to create highly rough comparisons, orders in magnitude are typically used. It is primarily used when notating scientific data. One is roughly 10 times greater than the other if two integers are separated through one order of magnitude. They differ by the a factor of around 100 if they are separated over two orders of magnitude.
To know more about force visit:
https://brainly.com/question/13191643
#SPJ4
earth has a mass of 5.98 x 10 24 kg. the average mass of the atoms that make up earth is 40 u. how many atoms are there in earth?
Using average mass of earth, there are approximately [tex]1.495 \times 10^{50} $atoms$[/tex] in Earth.
What connection exists between an object's mass and its atom count?An object's mass and number of atoms are directly proportional to one another. The number of atoms in an object increases as its mass increases, and the opposite is also true.
You may determine an object's atomic composition by dividing its mass by the average mass of its constituent atoms. Since the average mass of the atoms in the earth is 40 u and its mass is [tex]5.98 x 10^{24} kg[/tex], it is possible to calculate the number of atoms in the earth by dividing its mass by the average mass of its atoms.
We can determine the total number of atoms in an object using this approach.
The number of atoms in Earth can be calculated by dividing the total mass of Earth by the average mass of an atom.
Using the given information, we get:
[tex]5.98 \times 10^{24} kg / 40 u \\= 1.495 \times 10^{50} atoms.[/tex]
Therefore, there are approximately [tex]1.495 \times 10^{50} $atoms$[/tex] in Earth.
To know more about Average Mass visit:
brainly.com/question/178217
#SPJ4
if you double the radius what happens to the velocity of the object?
The stated assertion states that if you twice the radius, the object's velocity will be cut in half.
How does velocity get its name?Thus, velocity is measured in metres per second, or m/s. The metric speed unit is the metre per s (m/s). A different way to describe velocity magnitude is in centimeters per second (cm/s).
According to the following equation: v = r * ω, where v is movement, r is radius, and is angular velocity, velocity in a circle in physics is determined by the radius. In order to keep the angular velocity constant, you must reduce the velocity by half if the radius doubles.
To know more about Velocity visit:
brainly.com/question/18084516
#SPJ4
a rock is tossed straight up with a speed of 26 m/s. when it returns, it falls into a hole 14 m deep. ignore air resistance a. how long is the rock in the air, from the instant it is released until it hits the bottom of the hole? b. what is the rock's velocity as it hits the bottom of the hole?
The rock is in the air for 4.45 seconds, from the time it is released it until lands at the bottom of its hole.
What transpires when something is flung into the air?An object begins to fall freely when it is tossed up & reaches its highest point. Gravity is the force that pulls an item toward the Earth. As a result, even after an item stops moving due to gravity at its highest point, it can still accelerate.
A rock falls, but does it pick up speed?When something falls, gravity is the cause of the fall. That object experiences a force, which causes it to accelerate, increasing its fall velocity. the force of gravity, or how strongly the Moon pulls on anything.
To know more about Gravity visit :
https://brainly.com/question/14874038
#SPJ4
factual knowledge: light microscopes typically have a set of three lenses, with different magnifying powers, that can be used to examine a sample. those lenses are called
"Light microscopes typically have a set of three lenses, with different magnifying powers, that can be used to examine a sample. those lenses are called objectives."
There are some parallels between compound microscopes and electron microscopes. Only light microscopes can magnify objects using light and lenses.
A light microscope is an instrument or apparatus used in biology labs that makes use of visible light to locate, expand, and magnify extremely minute objects. They focus light using lenses on the specimen, amplifying it to produce a picture. The specimen is often placed close to the small lens. The microscopic magnification is greatly influenced by the kinds and number of lenses used in the microscope.
The two types of microscopes based on the number of lenses used are simple light microscopes, which have low magnification due to the use of a single lens, and compound light microscopes use at least two sets of lenses, an objective lens and an eyepiece, increasing their magnification above basic light microscopes.
To know more about microscope:
https://brainly.com/question/25043070
#SPJ4
a large box is pushed 10 meters across a horizontal floor with a force of 20 n. how much work is done moving the box?
200 Joules is work done moving the box if a large box is pushed 10 meters across a horizontal floor with a force of 20 n.
The work done on an object can be calculated as the force applied on the object multiplied by the distance it moves in the direction of the force. In this case, the force applied on the box is 20 N and it is moved 10 meters, so the work done can be calculated as:
W = F * d
W = 20 N * 10 m
W = 200 J (Joules)
So, 200 Joules of work is done in moving the box 10 meters with a force of 20 N.
200 Joules is work done moving the box if a large box is pushed 10 meters across a horizontal floor with a force of 20 n.
Learn more about work done here
https://brainly.com/question/13662169
#SPJ4
heather and jerry are standing on a bridge 60 m above a river. heather throws a rock straight down with a speed of 17 m/s. jerry, at exactly the same instant of time, throws a rock straight up with the same speed. ignore air resistance. how much time elapses between the first splash and the second splash?
Time elapses between the first splash and the second splash is 4.08 seconds
Jerry throws his rock up at 20 m/s. It will decelerate at the rate of 9.8 m/s^2, until it's velocity reaches zero. At that time it will reach apogee, and begin falling. So (20 m/s)/(9.8m/s^2) = 2.04 seconds To reach max height.
After 2.04 seconds it will begin accelerating downward, again by 9.8m/ s^2. So after another 2.04 seconds, it will be at the starting point, traveling at 20 m/ s. It will then follow the same time path as Heather's rock.
So Jerry's rock will take 4.08 seconds longer than Heather's to hit the water. The height above the water is not necessary information for this problem.
Learn more about Time here:
https://brainly.com/question/26046491
#SPJ4
suppose you throw a ball vertically downward with a speed of 15 m/s. neglecting air friction, what would be the speed of the ball one second later?
The speed of an object under the influence of gravity can be found using the equation v = v0 + a * t, So the speed of the ball one second later would be 24.8 m/s.
where v is the final speed, v0 is the initial speed, a is the acceleration due to gravity (9.8 m/s^2 downward), and t is the time elapsed.
In this case, the initial speed is 15 m/s (vertically downward),
the acceleration due to gravity is 9.8 m/s^2 downward, and the time elapsed is 1 second, so:
v = 15 m/s + 9.8 m/s^2 * 1 s
= 24.8 m/s
Speed is a scalar quantity which tells how fast an object is moving, regardless of its direction.
For such more question on speed
https://brainly.com/question/13943409
#SPJ4
in what ways can kinetic energy be measured? it can be measured in terms of the work blank . multiple select question. it was able to do before it started in motion the object will do in coming to rest done to place an object in motion the object could do once it comes to rest
Kinetic energy can be measured :
the object will do in coming to rest done to place an object in motion the object could do once it comes to restABOUT KINETIC ENERGYKinetic energy was discovered around the seventh century. According to the Physics LibreTexts page at that time, the science of mechanics has explained about plants between two objects where the first object moves, then the second object is in a state of rest.
When the first object moves, it bumps into a second object which is stationary and the first object stops moving. However, the second object, which was initially stationary, was moving with the first object's speed when it collided with the second object.
That is, there is a certain amount of energy transferred by the first object to the second object. Thus, the first object that was initially still becomes moving. From this, the idea of this energy was born.
Learn more about kinetic energy at https://brainly.com/question/26472013
#SPJ4