Hydrogen sulfide gas is reacted with dioxygen gas to produce gaseous sulfur dioxide and water. True or false?.

Answer: Nuclear fusion

Explanation:

I think

The correct matches for changes of state are:

Change of state is the process whereby matter in one physical state is converted to matter in another state by the addition or removal of heat.

The process of change of state are:

Considering the given diagram, the correct matches are:

In conclusion, change of state of matter occurs due to heat changes.

Learn more about change of state at: https://brainly.com/question/1078692

#SPJ1

As long as the sample has the same number of atoms for both elements, the mass ratio is independent of the sample size.

The arithmetic mean is calculated by adding a set of numbers, dividing by their count, and then taking the result. The molecular masses of different substances vary. Therefore, variable numbers of atoms, molecules, or moles exist in masses of equal mass. On the other hand, equal quantities of moles of different substances have different masses. The result will be disproportionately impacted by the one data point if you attempt to calculate an "average of averages". In essence, the value of the average of 10,000 data points is the same as that of the average of a single data point.

Learn more about Average here-

https://brainly.com/question/12322912

#SPJ9

The 14.1 ml solution has a density of 2.1365 g/ml.

Density is defined as the ratio between the mass of a substance and the volume it occupies. Denoted by ρ, density is mass per unit volume and the formula is given below:

ρ =  mass / volume

To solve for the density of a mixture or solution of two substances with different densities, the mass and volume of each substance must be known, as:

ρ mix = (M1 + M2) / (V1 + V2)

The volume and densities of the two given substances are known and can be used to solve for the unknown mass of each substance.

M1 = ρ x V1

M1 = 1.492 g/ml x 7.60 ml

M1 = 11.3392 g

M2 = ρ x V2

M2 = 2.890 g/ml x 6.50 ml

M1 = 18.785 g

Solving for the density of the mixture,

ρ mix = (M1 + M2) / (V1 + V2)

ρ mix = (11.3392 g + 18.785 g) / (7.60 ml + 6.50 ml)

ρ mix = 30.1242 g / 14.1 ml

ρ mix = 2.1365 g/ml

To learn more about density of mixtures: https://brainly.com/question/28037379

#SPJ4

The ability of water to function as a versatile solvent arise from the structure of water molecules are because:

Water molecules form hydrogen bonds with atoms that are part of polar covalent bonds other molecules

Water's versatility as solvent arises from the polar covalent bonds of water molecules.

Hydrogen bond is an electrostatic attraction between two polar groups that occurs when a hydrogen atom (H), covalently bound to a highly electronegative atom such as flourine (F), oxygen (O) and nitrogen (N) atoms.

In water, atoms of hydrogen (H) and oxygen (O) are connected by polar covalent bonds.

Covalent bond is bond between nonmetals. Hydrogen and oxygen are nonmetals.

Solvation is the interaction of solvent (water) with molecules or ions (for example K⁺ and I⁻) in a solute.

More about water solvent: brainly.com/question/24453293

#SPJ4

A sugar crystal is placed in water, every time a sucrose molecule dissociates from the crystal, water molecules surround it in a cloud forming a hydration shell.

What is a hydration shell?

The term "hydration shell" refers to a more or less continuous cluster of water molecules that surround and are somewhat linked to another substance that the water molecules are drawn to because it is hydrophilic, or water loving.

Since there is space between matter particles and sugar crystals, the level of water does not significantly rise when sugar crystals dissolve in it, keeping the water level constant.

Thus, every time a sucrose molecule separates from a sugar crystal in water, a cloud of water molecules forms around the crystal, creating a hydration shell.

To learn more about hydration shell from the given link below,

https://brainly.com/question/9602572

#SPJ4

Because the excess chemical compound can be contaminated with other chemical compound and some reaction can be happen thats why returning chemicals to a reagent bottle introduce contaminants.

There is a chance for the chemicals which is taken out from the reagent bottle to be contaminated with other substances. the chemical property of some of these chemicals may change on contact with air. all these factors may affect the quality of further reactions that were supposed to be carried out by these unused reagents

Know more about reagent bottle

https://brainly.com/question/28493984

#SPJ4

Answer: See below.

Explanation: An atom is made up of protons, neutrons and electrons.

If the dissolution of borax in water is spontaneous, the change in enthalpy will be both positive and negative. It can be predicted by the sign of the enthalpy change depending on the temperature.

Borax is a hydrated borate of sodium. It is a salt. When borax is mixed in water, it is converted into boric acid and the pH will be 9.13.

Enthalpy is a total heat energy present in a closed system, also called a thermodynamic system.

Thus, the change in enthalpy will be of both signs. Predicted by the sign of the change in temperature.

To learn more about enthalpy, refer to the link:

https://brainly.com/question/3298339

#SPJ4

Mixed molarity is 0.254 M

The volumes are additive is 1.22 M

Part A

mixed molarity = (M1 V1 + M2V2  )/  V1+V2

                     = (0.150 x 42  + 0.370 x 37.6 ) / (42+37.6)

                       = 0.254 M

NaOH = 0.254M

[Na+ ]= 0.254M

[OH-]= 0.254M

Part B

[Na+]  =  2 x 44 x 0.1 / 44 + 25

           = 0.1275 M

{SO4-2]  = 44 x 0.1 / 44 + 25  = 0.063 M

[K+]  =25 x 0.17 / 44 + 25 =  0.062 M

[Cl-]  = 25 x 0.17 / 44 + 25 = 0.062 M

Part C

KCl moles = 3.70 / 74.55 = 0.0493

KCl molarity = 0.0493 / 0.075  = 0.66M

[K+] = 0.66 M

[Ca+2]  = 0.280 M

[Cl-] = 0.66 + 2 x 0.280 = 1.22 M

Volume is a measurement of three-dimensional space that is occupied. Numerous imperial units or SI-derived units, such as the cubic meter and liter, are frequently used to quantify it numerically (such as the gallon, quart, and cubic inch). Volume and length (cubed) have a symbiotic relationship. The volume of a container is typically thought of as its capacity, not as the amount of space it takes up. In other words, the volume is the amount of fluid (liquid or gas) that the container may hold.

Volume was initially measured using naturally occurring vessels of a comparable shape and then with standardized containers. Arithmetic formulas can be used to quickly calculate the volume of several straightforward three-dimensional shapes.

To learn more about Volume visit here :

https://brainly.com/question/13807002

#SPJ4

Correct metal is aluminum

Martina has a sample of an unknown substance she measures the substance. its mass is 13.5 grams, and its volume is 5 cm³ so here density concept is seen.

Density = mass/volume

So 13.5/5 = 2.7

This density is same as aluminum that's why this metal is aluminum.

Aluminum is a chemical element with the symbol Al and atomic number 13  aluminum is a silvery-white, lightweight metal. It is soft and malleable. aluminum is used in a huge variety of products including cans, foils, kitchen utensils.

Know more about metal or density

https://brainly.com/question/28500000

#SPJ4

Answer:Aluminum

Explanation:

The balanced chemical equation for the reaction occurs when dimethyl ether, ch3och3(g), is combusted in air.

CH3OCH3(g) + 3O2(g) ----> 2CO2(g) + 3H2O(l)

A chemical is a substance with a defined composition. That is, chemicals are always made up of the same "things". Some chemicals are found in nature, such as water. Other chemicals are also manufactured, such as chlorine (used in bleaching fabrics and in swimming pools).

There are four main types of compounds, distinguished by how the atoms are bonded together. Molecular compounds are bound by covalent bonds. Ionic compounds are held together by ionic bonds. Intermetallic compounds are held together by metallic bonds. Coordination complexes are held together by coordinate covalent bonds. Non-stoichiometric compounds form a controversial edge case.

Learn more about chemicals here

https://brainly.in/question/5862203

#SPJ4

oxidation-reduction reactions are -

For reaction,

On reactant side:

Oxidation state of Carbon = +2

Oxidation state of Oxygen = 0

On product side:

Oxidation state of Carbon = +4

Oxidation state of Oxygen = -2

Here, carbon's oxidation state is rising from +2 to +4. As a result, it is oxidizing and the oxygen's oxidation state is decreasing from 0 to -2. As a result, it is decreasing.

For reaction,

                Fe2O3(s) + 3CO(g) → 2Fe(l) + 3CO2(g)

When reacting:

Iron's oxidation state is +3.

Carbon's oxidation state is +2.

On product side:

Iron's oxidation state is zero.

Carbon's oxidation state is +4.

Here, carbon's oxidation state is rising from +2 to +4. As a result, it is being oxidized and the iron's oxidation state is changing from +3 to 0. As a result, it is decreasing.

To learn more about oxidation-reduction from given link

https://brainly.com/question/5794822

#SPJ4

According to the research, the correct option is do not perform photosynthesis. Animal cells lack chloroplasts because they do not perform photosynthesis.

It is a eukaryotic type cell belonging to the Animalia kingdom and can reproduce independently and depending on the tissue to which they belong, they fulfill specific functions that define their morphology, their function and their needs.

In this sense, plants carry out photosynthesis since their cells have chloroplasts, which house chlorophyll, essential for obtaining energy from sunlight, on the other hand, animal cells lack these organelles and instead have what is necessary for oxidation glucose (respiration).

Therefore, we can conclude that according to the research, the correct option is do not perform photosynthesis. Animal cells lack chloroplasts because they do not perform photosynthesis.

Learn more about animal cells here: https://brainly.com/question/3469780

#SPJ1

A molecule with a trigonal bipyramidal electron geometry must have a central atom with how many bonding and nonbonding electron groups around it Equatorial.

An atom is a single neutral particle. A molecule is a neutral particle with two or more atoms bonded together. Water is a simple molecule consisting of one oxygen atom bonded to two different hydrogen atoms. The bond is a polar covalent bond (polar bond) due to the high electronegativity of the oxygen atom.

About 99% of the body consists of atoms of hydrogen, carbon, nitrogen, and oxygen. It also contains much smaller amounts of other elements necessary for life. Something like table salt (NaCl) is a compound because it is made up of multiple elements (sodium and chlorine), but it is not a molecule because the bonds that hold NaCl together are ionic bonds.

Learn more about molecules here

https://brainly.com/question/26044300

#SPJ4

The multiplicities that are observed for the signals in the off-resonance decoupled 13c nmr spectrum of (2e)-3-chloro acrylaldehyde is a singlet, a triplet, and a quartet. The correct option is E.

Off-resonance decoupling is a process of removing all hydrogen and carbon coupling from a signal except for the place which is near the nucleus or joined with the nucleus.

In NMR also, the coupling of hydrogen and carbon is removed except for the place near the nucleus.

Thus, the correct option is E) a singlet, a triplet, and a quartet.

To learn more about off-resonance, refer to the link:

https://brainly.com/question/28169200

#SPJ4

The question is incomplete. Your most probably complete question is given below:

A) 2 singlets and a doublet

B) a singlet and 2 doublets

C) 3 singlets

D) a singlet, a doublet, and a triplet

E) a singlet, a triplet, and a quartet

Hydrogen deficiency index (HDI) for a compound with the molecular formula C9H10O.

What is Hydrogen Deficiency Index(HDI)?

A "deficit" of H atoms would exist if any of the bonds were replaced with double or triple bonds or if rings were involved. We may determine whether and how many multiple bonds and rings are present from the molecular formula by computing the index of hydrogen deficit (IHD). IHD is also known as Unsaturation Degree.

The compound  C9H10O has five pi bonds, which is a count of deficiency.

Thus, HDI for C9H10O is five.

To learn more about Hydrogen Deficiency Index(HDI) from the given link below,

https://brainly.com/question/13652394

#SPJ4

Multiple factors can affect the accuracy of a pulse oximeter reading, such as

Observe the manufacturer's recommended usage procedures. When you put the oximeter on your finger, make sure your hand is cosy, relaxed, and positioned below the level of your heart.

Remove any nail paint you might have had on that finger. While you are still seated, do not move the location of the pulse oximeter on your body. Wait for the reading to stabilize and display a single number after a brief interval.

If you note your oxygen levels along with the date and time of the reading, you can easily track changes in them and inform your healthcare physician about them. Follow your doctor's recommendations for how often and when to check your oxygen levels.

To know more about pulse oximeter, refer:

https://brainly.com/question/8340469

#SPJ4

The density is the ratio of  the mass to the volume.

The term density refers to the ratio of mass to the volume of a substance. Given that mass is the quantity of matter in a body, we could use it to obtain the density of the body.

We know that solids have a definite volume, liquids have a definite volume but a gas does not have a definite volume. The volume of a gas is the same as the volume of the container where it is kept. This is why gases could be compressed but a solid and a liquid can not be compressed likewise.

The volume tells us how much space that an object expects to occupy. We have to combine the mass and the volume to get the density of an object. As such, we can see that the density is the ratio of  the mass to the volume.

Learn more about density:https://brainly.com/question/15164682

#SPJ1

Valine-valine and valine-leucine would be formed by heating a mixture of valine and N-protected leucine.

Amino acid leucine is protected at the N-terminal end, so it is not available to form a polypeptide at that end.

Peptide bond is a covalent chemical bond linking two consecutive alpha-amino acids from C1 (carbon number one) of one alpha-amino acid and N2 (nitrogen number two) of another along a peptide or protein chain.

Valine and leucine can react and form dipeptide valylleucine (valine-leucine), see picture below.

When two valine amino acids react, dipeptide valylvaline (valine-valine) is formed.

Polypeptide is a long and unbranched peptide chain with more than ten amino acids.

More about peptide bond: brainly.com/question/708241

#SPJ4

0.389×10^−19J  is the change in energy for the combination of these processes.

λ1=410nm=410×10^−9m

λ2=2628nm=2628×10^−9m

E1−E2 = Energy absorbed by the atom in the process =hc[1/λ1−1/λ2]

=6.63×3[1/410−1/2628]×10^−9 = 0.389×10^−19J

We get, 0.389×10^−19J.

Energy is the quantitative property that is transferred to a body or to a bodily system, recognizable in the performance of work and in the structure of warmth and light. Energy is a conserved quantity—the regulation of conservation of energy states that strength can be transformed in form, however not created or destroyed. The unit of size for energy in the International System of Units (SI) is the joule (J).

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ4

A given short peptide, SGYAL contains four peptide bonds. Any given short peptides/protein contain at least one amino group(s) (nh3 ) and one carboxyl group(s) (-coo- ).

SGYAL stands for secretaria general y asuntos legales. Sgyal is also written as Ser-Gly-Tyr-Ala-Leu . The structure of SGYAL is shown in the image attached. SGYAL contains four peptide bonds as highlighted by yellow color in the structure of SGYAL.

Peptide bond is formed by the condensation of carboxylic group of one molecule and amino group of other molecule. Any given short peptides/protein contain at least one amino group(s) ([tex]NH_{3}[/tex]) and one carboxyl group(s) ( -COO-).

To Know more about Protein Synthesis refer to the link:

https://brainly.com/question/884041

#SPJ4

It would take 1.23 seconds for the concentration of A to decrease from 0.810M to 0.260 M.

Balanced chemical equation: A → product

c₀(A) = 0.810 M; initial concentration of reactant A

c(A) = 0.260 M; concentration of reactant A after time t

k = 0.930 s⁻¹; the rate constant for this first‑order reaction

ln c(A) = ln c₀(A) - k·t; a first-order is proportional to the concentration of the reactant.

t = (ln c₀(A) - ln c(N₂O₅)) ÷ k.

t = (-0.21 + 1.35) ÷ 0.930 s⁻¹.

t = 1.14 ÷ 0.930 s⁻¹

t = 1.23 s; duration of this chemical reaction

More about first-order reaction: brainly.com/question/24080964

#SPJ4

The Mole is the SI unit that expresses the amount of substance. Specifically, mole is defined as the amount of substance containing the same number of entities as there are in the 12 grams of Carbon - 12.

Mole is denoted by using symbol mol.

      Mole = 6.022 x 10²³ elementary entities.

These number of elementary entities in 1 mole is equal to or called as an Avogadro's number.  Mole is equal to 6.022 x 10²³ because this number of entity is same as in exactly 12 g of carbon-12.

It is a very important SI unit of measured which is used by the chemists. Moles are used in measuring in small or tiny things such as atoms, molecules and the other tiny particles.

A mole is the atomic weight of any molecule which is measured in grams. The concept of mole might be used for the mass and number of particles conversion.

To learn more about the mole concept,

brainly.com/question/28498715

#SPJ4

When combing your dry hair with a tough rubber comb, you rub electrons from your hair onto the comb then our hair is charged because On rubbing the comb with dry hair, the electrons from the hair are transferred to the comb due to Static energy.Hence comb becomes charged .

What is Static energy?

Static electricity is an imbalance of electric charges within or on the surface of a material or between materials.

Static electricity is the result of an imbalance between negative and positive charges in an object. These charges can build abreast of the surface of an object until they find a way to be released or discharged.

What is static energy used for?

Static electricity has several uses, also called applications, within the real world. One main use is in printers and photocopiers where static electric charges attract the ink, or toner, to the paper. Other uses include paint sprayers, air filters, and mud removal. electricity can also cause damage.

Learn more about static energy:

brainly.com/question/18562731

#SPJ4

Answer:

22.68

Explanation:

Since about 2.2 lbs = 1kg, 50 pounds is about 22.68.

The molarity of a solution of KIO3 is dissolved in enough water to make 250.0 ml of solution is 0.1595.

Molarity is the measure of the concentration of any solute per unit volume of the solution.

M = {n}{V}

The molar mass of KIO3 is  214.001

Given the mass is 853.5 mg

First, we calculate the number of moles

moles = mass / molar mass

853.5 / 214.001 = 3.988

Now, molarity can be calculated

The number of moles is 3.988

The volume is 250.0 ml

Putting the values in the formula

M =  3.988  / 250.0 = 0.1595

Thus, the molarity is 0.1595.

To learn more about molarity, refer to the link:

https://brainly.com/question/2817451

#SPJ4

The gas must be heated to a final temperature of 137°C in order to fill a volume of 557 ml.

Given,V₁= 371mlV₂ = 557 mlT₁ = 0°C or 273 K

The final gas temperature that has to be heated must be determined.

As long as the cylinder is free to move, the pressure is always 1 atm, or equal to the external pressure.

Consequently, by using Charles Law, we obtain

V₁ / T₁ = V₂ / T₂

where starting and ultimate volumes V1 and V2, respectively T1 and T2 are beginning and ultimate temperatures, respectively (in Kelvin).

The ultimate temperature is as a result

T₂ = V₂ × T₁ / V₁Or, T₂ = 557 x (0+273) / 371Or, T₂ = 410 KOr, T₂ = 137°C.

As a result, the temperature is 137°C at the end.

To learn more about Charle's law from given link:

https://brainly.com/question/888898

#SPJ4