How much charge must pass by a point in a wire in 10 s for the current inb the wire to be 0.50 a?

Complete Question

What type of spectrum, if any, would be produced if the light radiated by a heated atomic gas were to be dispersed through a prism? A. a continuous band of color B. a continuous band of color with some dark lines (missing wavelengths) C. only blue light D. only red light E. discrete lines of different colors

Discrete lines of different colors

When light passes through a heated atomic gas and then dispersed through the prism, A line spectrum is obtained always. This happens because when, heated atoms of the gas will be in excited state, these excited state atoms t will emit lights of specific frequency particular to the gas. Thus, a spectra containing lines of discrete colors is obtained on the screen.

Learn more about Dispersion here:

https://brainly.com/question/5001250

#SPJ4

The chemical formula of diiodine pentoxide is I2O5.

The chemical compound with the formula I2O5 is known as iodine pentoxide. The only stable iodine oxide is this one, which is the anhydride of iodic acid. It is made by dehydrating iodic acid in a stream of dry air at 200 °C.

2HIO3 = I2O5 + H2O.

At ambient temperature, iodine oxide (I2O5), which is created by dehydrating iodic acid (HIO3), is a white, crystalline solid that is stable up to 300°C (573K). I2O5 is a potent oxidizer. Its structure is described below. Iodine pentoxide is an oxidizing agent that transfers oxygen atoms to substrate. It functions as an oxidizing agent and speeds up the oxidation process by transferring oxygen atoms.

Learn more about Pentoxide here-

https://brainly.com/question/11143455

#SPJ4

Answer:

its probably covalent compound

Answer: applied

Explanation:

The density of galena is 7.56 g/cm³.

We need to know about the density to solve this problem. Density can be described as how much the mass is in a volume unit. It can be written

ρ = m / V

where ρ is density, m is mass and V volume

From the question above, we know that

m = 12.4 g

V = 1.64 cm³

By substituting the given parameter, we can calculate the density

ρ = m / V

ρ = 12.4 / 1.64

ρ = 7.56 g/cm³

Hence, the density of galena is 7.56 g/cm³.

Find more on density at: https://brainly.com/question/1354972

#SPJ4

Answer:

K.E = 1/2mv²

K.E = 1/2 * 6 * 24²

K.E = 1728J

Explanation:

Most polycrystalline materials consist of randomly arranged crystals or "grains." Although individual grains have different orientations and behave anisotropic ally by themselves that's why the properties of polycrystalline materials are most often isotropic.

Polycrystalline materials, or polycrystals, are solids that are made out of numerous crystallites of shifting size and direction. Most materials are polycrystalline, made of countless crystallites kept intact by meager layers of shapeless strong. Most inorganic solids are polycrystalline, including all normal metals, numerous earthenware production, shakes, and ice. The crystallite size can be determined from the full width at half most extreme force (FWHM) estimated on the adjusted diffraction profile. The guideline of crystallite size estimations by x-beam diffraction depends on the way that the Fourier change of various size crystallites shifts contrarily with the size of the crystallite.

Learn more about polycrystalline materials, refer:

https://brainly.com/question/25740877

#SPJ4

One-half second after starting from rest, a freely falling object will have a speed of about 5 m/s.

Falling things include goods, tools, garbage, and rubbish that are blown, dropped, or displaced from heights.

Physical science research frequently involves the study of gravity. Of course, what makes things fall is the force of gravity. A force of attraction between two objects is constant. This pulling force is similar to the pull of gravity.

given free fall from rest i.e.

initial velocity u=0 m/s

acceleration  a = 10m/s2

time t=0.5 seconds

we know final velocity v = u + at = 0 + (10 *0.5) = 5m/s

To learn more about the  falling object, visit: https://brainly.com/question/13299152

#SPJ4

Answer:

Potential

Explanation:

hope this helps

The approximate angular separation of the sun and the full moon is 180°

The full moon is opposite the sun in the sky, and rises as the sun sets is may be understand as ,the Moon can be seen in the day light  sky at any phase except for the new moon, when it's invisible to us, and full moon, when it's below the horizon during the day. The crescent through quarter phases are high in the sky during the day, but the daytime gibbous phases can be glimpsed only just before the Sun sets

In the crescent  phase, the lit-up part of the Moon increases from 0.1% to 49.9%. is growing, while crescent refers to the curved sickle shape.

The gibbous moon is the phase of moon in that appears more than half lighted but less than full.

To know more about  full moon

https://brainly.com/question/3103176

#SPJ4

weight of sweets and candy is 1.6kg

It is given that a total weight of 2 kg is allowed by the postal service

The weight of cookies is given to be 400gm

we know that 1kg =1000gm

400gm= 400/1000 gm =0.4kg

Therefore weight of sweets and candy that Amy can send=

total weight- weight of cookies

=2kg - 0.4kg

=1.6kg

Therefore, weight of sweets and candy is 1.6kg

#SPJ9

If John is 20.0 meters away from me and he is running away from me at 5.0 m/s. I sprint at 7.0 m/s to catch up. Then, I will take 10 seconds to reach him.

We know that,

Speed = Distance / Time

Time = Distance / Speed

Given that,

My speed = 7 m/s

John's speed = 5 m/s

Distance I need to cover to catch up John = ( 20 + x ) m

Distance John will cover before I catch up to him = ( x ) m

Since the time taken by both of us to reach that point is same,

( 20 + x ) / 7 = x / 5

100 + 5x = 7x

2x = 100

x = 50 m

Time required = Distance / Speed = 50 / 5        

Time required = 10 seconds  

It will take me 10 seconds to reach John.

To know more about Distance

https://brainly.com/question/28224010

#SPJ4

By elasticity, the most nearly load is D. 12370 N .

We need to know about elasticity to solve this problem. In elasticity, stress can be determined as

σ = e . δ

where σ is stress, e is elastic modulus and δ is the strain

From the question above, we know that:

e = 70 GPa = 70 x 10⁹  Pa

d = 15 mm = 0.015 m

δ = 0.001 mm/mm

Find the stress

σ = e . δ

σ = 70 x 10⁹ . 0.001

σ = 7 x 10⁷ Pa

Find the surface area of the aluminum rod

A = πR²

A = π(0.015/2)²

A = 1.77 x 10¯⁴ m²

Find the load

F / A = σ

F = σ x A

F =  7 x 10⁷ x  1.77 x 10¯⁴

F = 12375 N

Find more on elasticity at: https://brainly.com/question/7694106

#SPJ4

The specific set of equations that describe motion in terms of acceleration, displacement, time, and velocity are given as,

v = u + at.

v² = u² + 2as.

s = ut + ½at²

where, v is final velocity, u is initial velocity, t is time , s is displacement , a is acceleration. The above equation shows the equations of linear motion .

The acceleration is defined as ,the change in velocity (Δv) over the change in time (Δt), The unit is [tex]m/s^{2}[/tex]

acceleration (a) = Δv/Δt.

The velocity is defined  as the rate of change of displacement .The unit is given by m/s.

Δv= Δx/Δt

In the above equation, Δv is change in velocity,  Δx & Δt are the change in distance and time respectively.

To know more about velocity

https://brainly.com/question/12843437

#SPJ4

Acceleration of motorcycle is 4.44 km/sec².

Given that ,

Starting velocity = 10 km/hr

Final velocity = 50 km/hr

Time taken = 9 second

Acceleration of motorcycle = [Final velocity - Initial velocity]  / Time taken

Acceleration of motorcycle = [50 - 10] / 9

Acceleration of motorcycle = [40] / 9

Acceleration of motorcycle = 4.44 km/sec².

In the graph above, how does the acceleration at A compare with the acceleration at B?

a. The acceleration at A is positive and less than the acceleration at B.

b. The acceleration at B is positive and less than the acceleration at A.

c. The accelerations at A and B are each zero.

d. The accelerations at A and B cannot be determined.

Option C would be the response to the afore mentioned inquiry. According to the graph, there are no accelerations at A or B.

To know more about accleration , visit :

https://brainly.com/question/2303856

#SPJ4

As a result, the balloon was 1,410 meters above the ground when it was dropped.

Your height, for instance, is one of your dimensions. With a meter stick or tape measure, you can quantify that. We frequently refer to "three-dimensional space," in which we define an area using two dimensions and measure height using a third dimension.

The balloon's initial velocity and the bomb's beginning velocity will be equal. We consider downward velocity to be positive and upward velocity to be negative when falling. The balloon in the issue is moving upward at a speed of 100 m/s. Therefore, the initial velocity of the bomb will be -100m/s

Initial velocity of the bomb  

u = -100m/s

We know gravitational acceleration

g = 9.8m/s²

Time t = 30s

Required

height , s = ?

Using the equation we get,

[tex]s=u t+\frac{1}{2} g t^2[/tex]

s=(-100m/s)*(30s)+1/2*(9.8m/s²)*(30s)²

s= 1,410 m

As a result, the balloon was 1,410 meters above the ground when it was dropped.

To know more about Height visit:

https://brainly.com/question/27996736

#SPJ9

The complete question is -

A bomb dropped from a balloon reaches the ground in 30seconds .

Determine the height of the balloon if it is at rest in the air and if it is ascending with a speed of 100m/sec when the balloon is dropped.

1012, a record is declared as follows: the first letter in the first name is stored in location 1000. Each letter takes one location and an integer takes two locations.

Multiplication and Division of Integers: the merchandise of a positive integer and a negative integer is negative: the merchandise of two positive integers is positive. The product of two negative integers is positive.

They are important because they assist to facilitate certain calculations by including integer negative numbers. In addition, they also include all negative and positive numbers without a percentage point.

The whole numbers are real numbers that don't have fractions, decimals, and negative numbers. It's neither positive integer nor negative. Zero obeys the rule of whole numbers. Positive numbers are greater than 0 and located to the proper of 0 on the variety line.

Negative numbers are but 0 and located to the left of 0 on the variety line. The quantity zero is neither positive nor negative. Zero is neither positive nor negative. It's the sole number with such characteristics.

learn more about integer: https://brainly.com/question/17695139

#SPJ4

sine wave or sinusoidal wave -

sine wave can be described as a geometric waveform that oscillates periodically.

It retains its wave shape when added to the another sine wave of the same frequency.

It is a continuous wave.

the general form of sine wave is

y = asin(bx)

where

amplitude is the maximum displacement from its mean position to extreme position.

Periodicity is a repeating continuous pattern which determine its wavelength and frequency.

Frequency of sine wave.

1kHz that is sine wave goes through thousand complete cycle in one second.

Speed of sine wave.

Speed = frequency x wavelength

To know more about sine wave.

https://brainly.com/question/16420141

#SPJ4

The force resultant is 10N.

We need to know about force resultant to solve this problem. The force resultant can be described as the sum of force according to the magnitude and direction. It can be written as

∑F = F1 + F2 + .... + Fn

where ∑F is force resultant, F1 is the first force and Fn is the n-force.

From the question above, the parameter given is

F1 = 5 N

F2 = 5 N

Because of the same direction, the force will be added up each other.

∑F = F1 + F2

∑F = 5 + 5

∑F = 10 N

Hence, the force resultant is 10N.

For more on force resultant at: https://brainly.com/question/25239010

#SPJ4

It takes 16.5 seconds to reach its top speed of 80.0 km/h, starting from rest.

A branch of physics called kinematics, which was evolved from classical mechanics, defines how points, bodies, and systems of bodies (groups of objects) move without taking into account the forces that propel them. The discipline of kinematics is sometimes thought of as a subfield of mathematics and is frequently referred to as the "geometry of motion." Any known values of the location, velocity, and/or acceleration of points inside the system are declared as initial conditions for a kinematics issue, together with the geometry of the system. The position, velocity, and acceleration of any unidentified system components can then be calculated using geometrical considerations.

Where [tex]v[/tex] is the final velocity and [tex]v_{0}[/tex] is the initial velocity, we utilize the formula [tex]v = v_{0}+at[/tex] (because the train starts from rest), [tex]a= 1.35\frac{m}{s^{2} }[/tex], [tex]v_{0} = 80.0\frac{km}{h} = 22.22\frac{m}{s}[/tex]

Injecting these into the formula above and calculating t provides us with,

[tex]t= \frac{v-v_{0} }{a}[/tex] ≈ [tex]16.5 s[/tex]

If you want to learn more about kinematics visit: https://brainly.com/question/7590442

#SPJ4

The change in distance of the armadillo is 33 m and the velocity of armadillo is 0.99 m / s

We know that,

v = Δx / t

Δx = [tex]x_{2}[/tex] - [tex]x_{1}[/tex]

where,

Δx = Change in distance

v = Velocity

t = Time

[tex]x_{2}[/tex] = Final position

[tex]x_{1}[/tex] = Initial position

Given that,

[tex]x_{2}[/tex] = 56 m

[tex]x_{1}[/tex] = 23 m

t = 33.4 s

Δx = 56 - 23 = 33 m

v = 33 / 33.4

v = 0.99 m / s

Change is distance is the amount of distance between initial and final positions. It is denoted using Δx.

Therefore, the change in distance of the armadillo is 33 m and the velocity of armadillo is 0.99 m / s

To know more about Change is distance

https://brainly.com/question/21946411

#SPJ1

A fan blows the air and gives it kinetic energy, an hour after the fan has been turned off, the kinetic energy turns into thermal energy.

The fact that all energy is conserved causes a heat flow, which raises internal (or thermal) energy, as the air molecules slow and lose kinetic energy.

Kinetic energy, which may be seen in the movement of an object, particle, or group of particles, is the energy of motion. Any moving item uses kinetic energy, such as a person walking, a baseball being thrown, a piece of food falling from a table, or a charged particle in an electric field.

The energy of a body in motion, or kinetic energy (KE), is essentially the energy of all moving objects. Along with potential energy, which is the stored energy present in objects at rest, it is one of the two primary types of energy.

Learn more about kinetic energy:

https://brainly.com/question/25959744

#SPJ4

The correct answer is Option B) Open.

A schematic can tell an electrician that the switches are normally open

until the sensor senses smoke.

A simple, understandable graphical representation of a plan or model is called a schematic diagram. Simple lines and symbols are used in schematics to convey details like what, how, and where. A schematic diagram's primary role is to highlight circuit components and the relationships between them. Schematics are a very useful tool for troubleshooting since they show which parts are connected in series or parallel and how.

An example of an electrical switch is one that is normally open. A typically open switch remains "off" when it is not compressed. The inside electrical connections are to blame for this. In a typically open switch, the contacts are open when the switch is off. This indicates that the switch is "off" because the electrical connection is damaged.

To know more about schematic diagram, visit:

https://brainly.com/question/14323677

#SPJ4

The moment of inertia of the pendulum is determined as 0.0025 kgm².

The moment of inertia of an object is defined as a measurement the rotation of the object around a fixed axis.

The pendulum can be modelled as a circular disk and the moment of inertia is calculated as follows;

I = ¹/₂Mr²

where;

Substitute the given parameters and solve for the moment of inertia of the pendulum.

I = 0.5 X 0.5 kg x (0.1)²

I = 0.0025 kgm²

Thus, the moment of inertia of the pendulum is determined as 0.0025 kgm².

Learn more about moment of inertia here: https://brainly.com/question/3406242

#SPJ1

The Mass of chlorine gas is [tex]2.60[/tex] × [tex]10^{3}[/tex] [tex]g Cl_{2}[/tex]

Mass of [tex]P_{4}=455 g[/tex]

Phosphorus and Chlorine gas are the reactants.

Phosphorus pentachloride is the product.

[tex]_P_{4}(S)+_Cl_{2}(g) ------- > _PCl_{5}(S)[/tex]

Place 1,10 and 4 as the coefficients of [tex]P_{4} ,Cl_{2} ,[/tex] and [tex]PCl_{5}[/tex]

[tex]_P_{4}(S)+10Cl_{2}(g) ------- > 4PCl_{5}(S)[/tex]

Multiply the calculated number of moles of [tex]Cl_{2}[/tex] by its molar mass. The molar  mass of [tex]Cl_{2}[/tex] is 70.90 g/mol.

Mass of [tex]Cl_{2}[/tex] needed = 36.7232 mol [tex]Cl_{2}[/tex] × [tex]\frac{70.90 g Cl2}{1 mol Cl2}[/tex] = [tex]2.60[/tex]×[tex]10^{3}[/tex] [tex]g Cl_{2}[/tex]

Fertilizers are the principal application for phosphorus, which is used in the form of concentrated phosphoric acid. Additionally, insecticides, detergents, plasticizers, and baking powder all contain phosphorus-based chemicals.

Phosphate is a key component of fertilisers and supports high crop yields. It is essential to the entire agriculture sector and cannot be easily replaced. Phosphate rock mining, however, is occurring at an unsustainable rate. By utilising microorganisms to precipitate the phosphorus, some researchers are attempting to recover phosphorus from wastewaters.

To learn more about elemental phosphorus , visit:

https://brainly.com/question/8844349

#SPJ4

The speed when it collides with a metal atom = 27.5m/s

A particle or item in motion has a form of energy called kinetic energy. When work, which entails the energy transfer is done on an object by applying a net force, that object acquires kinetic energy.

In the electric field, the electron loses potential energy while gaining kinetic energy. You may calculate the kinetic energy as

[tex]K=\frac{m_e v^2}{2}=e E d[/tex]

Here,

[tex]\text { } m_e=9.11 \cdot 10^{-31} \mathrm{~kg}[/tex] is the mass of the electron;

[tex]e=1.6 \cdot 10^{-19} C[/tex] is the charge of the electron;

E is the electric field;

The distance that an electron travels is called d;

When we solve for the electron's speed, we arrive at:

[tex]v=\sqrt{\frac{2 e E d}{m_e}}[/tex]

Calculate yields:

[tex]v=\sqrt{\frac{2 \cdot 1.6 \cdot 10^{-19} C \cdot 0.060 N / C \cdot 3.6 \cdot 10^{-8} \mathrm{~m}}{9.11 \cdot 10^{-31} \mathrm{~kg}}} \approx 27,5 \mathrm{~m} / \mathrm{s}[/tex]

To know more about Kinetic Energy visit:

https://brainly.com/question/12669551

#SPJ4

For a 166-lb person, a dose of 452 milligrams is prescribed to treat asthma.

Lung damage is a side effect of asthma. Repeated episodes of coughing, dyspnea, chest tightness, and wheezing are also brought on by it. By taking medication and avoiding the triggers that can set off an attack, asthma can be managed. Outdoor allergens, such as pollen from grass, trees, and weeds, are common asthma triggers. Different allergens and irritants might function as triggers for different people. Dust mites, cockroaches, mold, and pet dander are examples of indoor allergies. Air irritants like smoke, chemical fumes, and powerful scents.

Mass = 166 lb×(453.59 g/1 lb)×(1kg/1000g)=75.30 kg

Dose = 75.30 kg ×(6.00 mg/1 kg)=452 mg

Elixophyllin has a 452 mg dose for a 166 lb person with asthma.

To know more about asthma, click here:

https://brainly.com/question/5009040

#SPJ4

Here is the difference between contact forces and non-contact forces:

Contact forces are forces that result from two objects coming into physical contact with each other. Non-contact forces are forces that result from the interaction of objects that are not in contact with each other.

Answer: Innovations originally designed for space vehicles, including artificial muscle systems, robotic sensors, diamond-joint coatings, and temper foam,

Explanation: make artificial human limbs more functional, durable, comfortable, and life-like.