graphite and diamond are polymorphs in that they have the same chemical compositions but different crystalline structures true false

The molecular formula of lactose is not C12H24O12 because that formula does not reflect the actual chemical composition of lactose.

The molecular formula of lactose, C12H22O11, represents the actual chemical composition of the molecule and the number of atoms of each element it contains. While it's true that the formula could also be written as C12H24O12, this would not accurately reflect the chemical structure of lactose.

Lactose is a disaccharide, meaning that it is composed of two monosaccharides, which in this case are glucose and galactose. The molecular formula of lactose is derived from the formulas of its constituent monosaccharides and takes into account the chemical bond that links them together. When glucose and galactose are chemically bonded, one molecule of water H2O is eliminated, resulting in the formation of lactose with the formula C12H22O11, which is derived from the formulas of its constituent monosaccharides and takes into account the chemical bond between them.

To learn more about  Molecular formula :

https://brainly.com/question/11126982

#SPJ4

Through a process known as linear combination, two sp2 hybrid orbitals produce three molecular orbitals.

A mathematical function called an orbital describes where an electron is most likely to be found in an atom. It is described as the area in three dimensions surrounding an atom's nucleus where the electron is most likely to be present. The electron cloud's energy level, angular momentum, and shape are used to describe orbitals.

Through the use of the LCAO method, two sp2 hybrid orbitals can be merged to create three molecular orbitals. Bonding, non-bonding, and antibonding molecular orbitals are these types of molecular orbitals. The shared electrons between the two atoms are held in the bonding molecular orbital, which has a lower energy than the original hybrid orbitals. The antibonding molecular orbital is more energetic and contains the electrons in the bond that weaken the connection, whereas the non-bonding molecular orbital has the same energy as the original hybrid orbitals.

To know more about orbital, visit:

https://brainly.com/question/18914648

#SPJ4

To calculate the total internal energy of the mixture, we need to determine the amount of liquid water and steam in the container, and then calculate the internal energy of each phase using steam tables.

First, we need to find the saturation temperature at 35 bar using steam tables. This temperature is the temperature at which the pressure is 35 bar and the mixture is in a state of equilibrium, with water and steam coexisting in the container.

Next, we can use the steam tables to find the specific enthalpy of vaporization, hfg, for the saturation temperature. The specific enthalpy of vaporization is the amount of heat required to convert 1 kg of liquid water at saturation temperature to steam at saturation temperature.

Once we have hfg, we can calculate the amount of liquid water and steam in the container by using the pressure, volume, and temperature of the mixture. The total internal energy is then the sum of the internal energy of the liquid water and steam.

It's important to note that the calculations are quite involved and require a detailed understanding of thermodynamics, the properties of water and steam, and the use of steam tables. Therefore, this answer provides an overview of the process, but a complete solution would require more extensive calculations and data from steam tables.

Learn more about internal energy here: https://brainly.com/question/27950155

#SPJ4

The elements that are likely to form a cation are :calcium, barium, cesium,  rubidium, lead and scandium.

The given elements here are :oxygen, chlorine, calcium, barium, cesium, rubidium, lead, scandium and phosphorous

A cation is defined as an element which has the ability to donate its valence electrons easily and attain electropositive character.

All metal elements has the ability to form cations.

The elements that are likely to form a cation are : calcium, barium, cesium, rubidium, lead and scandium.

The elements that will always form ionic compounds in a 1:2 ratio with the halogens are: lead, barium and calcium.

To know more about cations here

https://brainly.com/question/17550521

#SPJ4

The natural movement of molecules along their chemical gradient.

A molecule is the smallest unit of a chemical compound and is made up of two or more atoms connected by chemical bonds. It has the chemical properties of the compound. The atoms that make up molecules might be of the same kind, as in the case of molecular oxygen (O2), or they can be of different types, as in the case of water (H2O), which is composed of hydrogen and oxygen atoms.

The tendency of molecules is to spontaneously shift from a region of higher concentration to a region of lower concentration along their chemical gradient. Due to the random mobility of individual molecules and their propensity to spread themselves uniformly in space, a concept known as diffusion governs this movement. Natural processes such as diffusion take place in both living and non-living systems, and they are essential to many biological activities like respiration, osmosis, and the transportation of nutrients and wastes.

To know more about molecules, visit:

https://brainly.com/question/1446104

#SPJ4

The amount of NaOH that must be added is 1.276 moles.

To calculate the pH of a buffer solution, we can use the Henderson-Hasselbalch formula:

  pH = pKa + log(A⁻ / HA)

The equation for the reaction between NaOH and HC₂H₃O₂ is as follows:

  NaOH (s) + HC₂H₃O₂ (aq) -> Na⁺ (aq) + C₂H₃O₂⁻ (aq) + H₂O (l)

The initial moles of HC₂H₃O₂ is 2.0 M * 1.0 L = 2.0 moles.

Plug the known values into the Henderson-Hasselbalch formula:

  5 = -log (1.76 * 10⁻⁵) + log (NaOH moles / 2.0 - NaOH moles)

  5 = 4.754 + log (NaOH moles / 2.0 - NaOH moles)

0.246 =  log (NaOH moles / 2.0 - NaOH moles)

[tex]10^{0.246}[/tex] =  log (NaOH moles / 2.0 - NaOH moles)

1.762 =  log (NaOH moles / 2.0 - NaOH moles)

NaOH moles = 1.276.

Your question seems incomplete. The completed version is mostly as follows:

What quantity (moles) of NaOH must be added to 1.0 L of 2.0 M HC2H3O2 to produce a solution buffered at pH = 5?

Learn more about buffer solution at https://brainly.com/question/27371101

#SPJ4

Answer:

It's not that hard to do figure it out yourself

Explanation:

too simple

Since ammonia and water have tetrahedral arrangement of electron pairs, then the hybridization of the nitrogen and oxygen in both molecules is sp3

Molecule is the smallest part of a substance that still has the same properties as the substance. If the nature of the arrangement of atoms in a molecule changes, the properties of the molecule will also change. Tetrahedral is a rectangular pyramid shape that has an equilateral triangular face in which there are five atoms of this molecular shape found in ammonia and water.

Hybridization is the process of combining a central atomic orbital with other atomic orbitals to form hybrid orbitals. Such hybrid orbitals can be formed by mixing atomic orbitals that are close in energy in character. In nitrogen covalent bonds are also formed between carbon compounds and other atoms. The sigma bond is formed by overlapping the unpaired sp3 hybrid orbital with the 1s orbital of the hydrogen to give an ammonia molecule and oxygen's six valence electrons. After hybridization, it will have two half-filled sp3 orbitals and will form two bonds reflecting the mixing of the respective atomic orbitals..

Learn more about hybrid orbitals at:

https://brainly.com/question/29020053

#SPJ4

The frequency of a red light with a wavelength of 650 nm is 4.6 × 10¹⁴Hz.

The frequency of a wave (red light) can be calculated by dividing the speed of the wave by the wavelength as follows:

f = v/λ

Wavelength is often designated in physics as λ, and corresponds to the velocity of the wave divided by its frequency.

According to this question, the wavelength of the red light is 650nm i.e. 6.5 × 10-⁷m. The frequency is calculated thus;

f = 3 × 10⁸ ÷ 6.5 × 10-⁷

f = 4.6 × 10¹⁴Hz

Learn more about frequency at: https://brainly.com/question/14316711

#SPJ1

Mole is one of the International System of Units' seven foundation units (SI). Therefore, 3.8 moles of  H₂ are produced from 7.6 moles of HCl.

A mole is just a measuring scale. In reality, it's one of the International System of Units' seven foundation units (SI). When already-existing units are insufficient, new ones are created.

The levels at which chemical reactions frequently occur exclude the use of grams, yet utilizing actual numbers of atoms, molecules, or ions would also be unclear. To fill this gap between extremely small and extremely huge numbers, scientists created the mole.

Mg + 2 HCl → MgCl₂ + H₂

moles of HCl =7.6 moles

The mole ratio between HCl and  H₂ is 2:1

mole of H₂ =7.6 / 2=3.8 moles

Therefore, 3.8 moles of  H₂ are produced from 7.6 moles of HCl.

To learn more about mole, here:

https://brainly.com/question/15209553

#SPJ1

The higher the boiling point lower will be the vapor pressure. Thus, the correct order of vapor pressure is [tex]H_{2}O[/tex] < [tex]CHCL_{2}[/tex] < [tex]CS_{2}[/tex].

The boiling factor of a substance is the temperature at which the vapor strain of a liquid equals the stress surrounding the liquid and the liquid modifications right into a vapor. The boiling point of a liquid varies depending on the encompassing environmental stress.

The boiling point for any material is the temperature point at which the fabric transforms into the gas segment in the liquid phase. This happens at a hundred ranges centigrade for water. The boiling point of a pure substance is the temperature at which the substance transitions from a liquid to the gaseous segment. At this point, the vapor stress of the liquid is equal to the implemented stress of the liquid. The boiling point at a strain of 1 ecosystem is known as the regular boiling factor.

To learn more about Boiling point visit here:

brainly.com/question/2153588

#SPJ4

False. There cannot be 74.97 carbons in an unknown molecule.

A molecule is the smallest unit of a chemical compound and is made up of two or more atoms connected by chemical bonds. It has the chemical properties of the compound. The atoms that make up molecules might be of the same kind, as in the case of molecular oxygen (O2), or they can be of different types, as in the case of water (H2O), which is composed of hydrogen and oxygen atoms.

Chemically speaking, the statement "An unknown molecule was determined to be 74.97 carbon" makes no sense. It is impossible for a compound to consist only of carbon. Chemical analysis can be used to establish the percentage composition of the elements that make up compounds, which are composed of several elements mixed in precise ratios. A molecule might, nevertheless, have 74.97% carbon by weight if it were properly tested.

To know more about molecules, visit:

https://brainly.com/question/1446104

#SPJ4

If 6.805 grams of the material contain 0.096 moles, the molar mass of the material is 70.88 g/mol.

The mass of the material = 6.805 grams

The moles of the material = 0.096 mol

The number of moles is expressed as follows :

The number of moles = mass / molar mass

Where

The number of moles = 0.096 mol

Mass = 6.805 grams

The molar mass is expressed as :

Molar mass = mass / moles

Molar mass = 6.805 g / 0.096 mol

Molar mass = 70.88 g/mol

Thus, the molar mass of the substance is 70.88 with the mass of 6.805 g.

To learn more about moles here

https://brainly.com/question/26416088

#SPJ4

If 72 grams of magnesium is combined with 82 grams of hydrogen fluoride, the number of hydrogen molecules that will be produced is: 1.8066 x 10^24 hydrogen molecules.

First is to determine the number of moles of magnesium and hydrogen fluoride that are present.

Number of moles of magnesium = 72 g / 24 g/mol = 3 moles

Number of moles of hydrogen fluoride = 82 g / 20.01 g/mol = 4.1 moles

Next, we use the balanced chemical equation for the reaction between magnesium and hydrogen fluoride to produce magnesium fluoride and hydrogen gas:

Mg + 2HF → MgF2 + H2

From the equation, we can see that for every 2 moles of magnesium, 2 moles of hydrogen gas are produced. Since we have 3 moles of magnesium, the number of moles of hydrogen produced is:

3 moles Mg * (2 moles H2 / 2 moles Mg) = 3 moles H2

Finally, to find the number of hydrogen molecules, we multiply the number of moles by Avogadro's number:

3 moles H2 * 6.022 x 10^23 molecules/mole = 1.8066 x 10^24 hydrogen molecules

Therefore the number of hydrogen molecules is 1.8066 x 10^24 hydrogen molecules.

Learn more about number of hydrogen molecules here:https://brainly.com/question/22584329

#SPJ1

Pure water has a vapour pressure of 23.76 torr at 25 degrees Celsius.

According to Raoult's law, a solution's vapor pressure varies in direct proportion to the amount of solvent it contains by mole.

Vapor pressure is the force that a vapor applies on the condensed phases (solid or liquid) in a closed system when they are in thermodynamic equilibrium at a particular temperature (or equilibrium vapor pressure).

It is thought that the vapor is exerting pressure on the atmosphere. In other words, the higher the vapor pressure, the faster the evaporation of a liquid.

A liquid's vapor pressure is one of its properties and depends on the strength of its intermolecular forces. Liquids have higher vapor pressure and are easier to evaporate due to weak intermolecular interactions. Lower vapor is produced by a liquid with higher intermolecular interactions.

To know about solution

https://brainly.com/question/7932885

#SPJ4

Answer:

a

Explanation:

Just add the PARTIAL pressures together

           to get the TOTAL pressure = 100 torr

To be considered familiar with a material safety data sheet (SDS), verify hazard statements, material identification and description, handling, storage and reactivity information, and personal protection and first aid recommendations need to do it.

Safety data sheets contain information such as the properties of each chemical. Physical, physical, and environmental health hazards; protective measures; safety precautions for chemical handling, storage, and transport. A Safety Data Sheet (previously called a Material Safety Data Sheet) is a detailed information document prepared by a manufacturer or importer of hazardous chemicals. Describes the physical and chemical properties of the product.

Learn more about SDS

brainly.com/question/13616947

#SPJ4

With a principal quantum number of n, the maximum number of electrons in the shell is 2n². A maximum of two electrons with the opposite spin can fit in any orbital.

The electrons' position in relation to the atom's nucleus is described by the principal energy level, which is the outermost energy shell. It is known as a main quantum number and is denoted by the letter "n."

The wave behavior of particles leads to quantized energy levels, which establish a correlation between a particle's energy and wavelength. The wave functions that have clearly defined energies for a confined particle, like an electron in an atom, take the shape of a standing wave.

To learn more about quantum numbers visit:

brainly.com/question/18835321

#SPJ4

The object is to measured to have the density of 12.45 g/ml. The mass of a cube of this substance that measures 8.0 cm on each side is 6374.4 g.

The side of the cube = 8 cm

The volume of the cube is as follows :

Volume of cube = ( side )³

Volume of cube = ( 8 cm³)

Volume of cube = 512 cm³

The density of the cube = 12.45 g/mL = 12.45 g/cm³

The density is expressed as :

The density = mass / volume

Mass = density × volume

Mass =  12.45 g/cm³ × 512 cm³

Mass = 6374.4 g

To learn more about density here

https://brainly.com/question/10842847

#SPJ4

Li2O's molar mass is determined to be 29.88 g/mol. The following is how the number of moles of Li2O is determined: Li2O has a molecular weight of 1.67 mol, or 50.0 g/(29.88 g/mol).

Follow the grams to moles formula to accurately estimate the number of moles, n, of a substance with a particular mass, m (in grams): where n = m/M, where: The material's molar mass is M.

Having more than 50 common moles on your body significantly raises your risk of skin cancer, despite the fact that common moles are fairly common and should not always be a cause for concern. You should see a doctor if you have a lot of moles on your body, no matter what kind of moles they are.

To know more about moles visit :-

https://brainly.com/question/20486415

#SPJ4

Minerals that do not contain metals include bauxite, hematite, iron ore, and others. Non-metallic minerals include diamond, salt, potash, and mica.

Some examples include sand, gravel, marble, limestone, clay, and other nonmetallic minerals. Metallic properties like luster, rigidity, good electric and thermal conductivity, and malleability are lacking in these materials; However, they are used by numerous business sectors.

The most frequently used household metals are copper and aluminum. The most common household metal alloys are steel (iron, carbon, and other elements) and brass (copper and zinc).

To know more about Bauxite visit :-

https://brainly.com/question/29193728

#SPJ4

It is important to use only deionized water rather than tap water to extract the NaCl from the mixture because deionized water helps in eliminating impurities coming from the tap water or packed bottles of water.

Deionizing of water removes ions and other unwanted particles present in water, which reduces chemical reactions between dissolved solids. This makes the solution purer, with only few substances left behind.

Generally, laboratory technicians can effectively manufacture the right medical products with the help of a suitable chemical composition for pure and neutral water (deionized).

For example, where a chemist wants to create saline or another solution which is to be infused into the body for curing the disease. Therefore, in such case water must first be deionized properly first then that becomes suitable for making saline.

Learn more about deionized water from the link given below.

https://brainly.com/question/25326107

#SPJ4

Increasing the quantity of solution is the modification that accelerates the reaction.

What is the reaction's rate?

The rate of the reaction provides information about how quickly the reaction will be completed or the products will develop.

The following chemical reaction:

2H₂O₂ 2H₂O + O₂

MnO₂ serves as a catalyst in the aforementioned chemical process, which speeds up the reaction without actually taking part in it. Therefore, the product's formation is solely dependent on the solution's concentration. Therefore, the rate will grow as the solution amount increases.

Therefore, increasing the solution will result in an increase in rate.

For such more question on accelerates

https://brainly.com/question/460763

#SPJ4

When two of the phosphoric acid's hydroxyl groups interact with hydroxyl groups on other molecules to produce two ester bonds, a phosphodiester bond is created.

The condensation reaction between the phosphate groups and the hydroxyl groups of the two sugar groups produces the phosphodiester bonds. For instance, the hydroxyl group is created when one oxygen atom and one hydrogen atom combine to form a link.

A phosphate group connects two nearby carbons through ester connections to form a covalent bond known as a phosphodiester bond. A condensation reaction between a phosphate group nd a hydroxyl group from two sugar groups produces the link.

to know more about phosphodiester bonds here:

brainly.com/question/23660733

#SPJ4

The force of the 300kg car moving with an acceleration of 10 m/s² is 3000N.

The force of a car can be calculated by multiplying the mass of the object by its acceleration as follows:

Force = mass × acceleration

According to this question, a 300kg car is moving with an acceleration of 10 m/s². The force acting on the object is calculated as follows:

Force = 300kg × 10m/s²

Force = 3000N

Learn more about force at: https://brainly.com/question/1046166

#SPJ1

The highest rf value and which has the lowest is ibuprofen>Aspirin>acetaminophen> caffeine

Chromatography uses something known as the Retention Value, or Rf value for short, to make the procedure more scientific than just a visual interpretation. If other experimental parameters are held constant, a specific solvent (or solvent mixture) will move a specific substance the same amount along the stationary phase. To put it another way, each component (dye, pigment, organic material, etc.) has a unique Rf value for each unique solvent and solvent concentration. Because one may compare the Rf values of the unknown sample (or its constituents) with Rf values of recognized substances, Rf values are particularly useful for identification.

Learn more about Rf value

brainly.com/question/17132198

#SPJ4

The atomic mass of the element that has two naturally occurring isotopes, isotope 1 has a mass of 120.9038 amu and a relative abundance of 57.4 %, and isotope 2 has a mass of 122.9042 amu = 121.7559

The weighted average of the atomic masses of each isotope is the atomic mass. When calculating a weighted average, each value is multiplied by a number that indicates its relative importance. In this scenario, each isotope's relative importance is indicated by its percent abundance.

The abundance of one isotope is 57.4%, while the abundance of the other is 42.6%.

100% - 57.4 % = 42.6%

Hence,

(120.9038) 0.574) + (122.9042)(0.426)

= 69.3988 + 52.3572

= 121.7559

So, the atomic mass of this element = 121.7559

The element is Sb, antimony with 121.76 atomic mass

Learn more about atomic mass here: https://brainly.com/question/29361556

#SPJ4

Since sodium hydroxide is hygroscopic and will collect water from the air, determining its mass is challenging.

To allow for possible human error, the mass of the burette segment with water should be measured twice. It is less likely that potential errors may affect experimental calculations when there are repeated measurements.

When calculating the concentration of a colored solution, the wavelength of maximum absorbance is utilized since at this wavelength, a small change in concentration can result in a large change in the absorbance of light.

To know more about sodium hydroxide visit:-

https://brainly.com/question/29327783

#SPJ4

The correct option is D. Hcn, the cyanic acid following is in an aqueous solution.

Solutions wherein water is the solvent are known as aqueous answers. An aqueous solution is water that incorporates one or extra dissolved substances. The dissolved materials in an aqueous answer may be solids, gases, or different liquids. that allows you to be a real answer, an aggregate should be solid.

An aqueous answer is a solution wherein the solvent is water. it is primarily proven in chemical equations by way of appending to the applicable chemical formula. as an example, an answer of table salt, or sodium chloride, in water might be represented as Na⁺ + Cl⁻. An aqueous answer is one in which the solvent is liquid water. this is, solute (dissolved) ions and molecules are surrounded by water molecules and incorporated into the community of bonds inside the water. The dissolved species then unfold for the duration of the water.

To learn more about Aqueous solutions visit here

brainly.com/question/26856926

#SPJ4