g a copper wire that is 3.14 m long with a diameter of 2 cm has an electrical resistance of 10 ohms. if this wire is cut exactly in half (equal length), what is the electrical resistance of each wire piece?

Answer:

a typical meteorite’s weight, surface area, and coefficient of drag; air density close to Earth

Explanation:

i just took the quiz lol :3

Answer:

Longitudinal (sound waves, heat transmission, etc.) require a medium for transmission,    air, insulation, etc.

Transverse waves - light, radio, etc can travel thru a vacuum

The minimum internal cooking temperature for ground beef is 160°F (71°C) to ensure that harmful bacteria such as E. coli and Salmonella are destroyed.

Ground beef should be cooked to an internal temperature of 160°F (71°C) as measured with a food thermometer to ensure that it is safe to eat. It is a versatile ingredient that can be used in a variety of dishes such as burgers, meatloaf, tacos, and spaghetti sauce

It is important to measure the temperature of ground beef in multiple places, especially for thicker cuts, to ensure that it is fully cooked and that harmful bacteria have been destroyed.

To know more about cooking, visit here:

https://brainly.com/question/5190639

#SPJ4

The change in internal energy can be calculated as q = 275 BTU/lb.

The change in internal energy of the water can be determined using the First Law of Thermodynamics, which states that the change in internal energy is equal to the heat added to the system.

Assuming that the pressure is constant throughout the process, the heat added can be calculated using the formula:

q = C-pm (T-f - T-i), where C-p is the specific heat of water at constant pressure (1.0 BTU/-lb-°F), m is the mass of the water (1 lb), and Ti and T-f are the initial and final temperatures (225°F and 500°F respectively).

Therefore, the change in internal energy can be calculated as q = 1.0 * 1 * (500 - 225) = 275 BTU/lb.

Learn more about constant pressure process:

https://brainly.com/question/30218581

#SPJ4

The spring's maximum compression if the same puck hits it at a speed of 2v will be 7.6 cm.

This is because the force of the impact is directly proportional to the puck's speed, so when the puck's speed doubles, the force of the impact doubles as well.

To calculate the spring's maximum compression, we can use the equation F = kx, where k is the spring constant, x is the maximum displacement, and F is the force of the impact.

Since we know the puck's speed (2v) and the maximum displacement (3 cm), we can solve for k to get k = F/x = (2v)/3. We can then use this value of k to calculate the maximum displacement at a speed of 2v, which is

x = F/k = (2v)/(2v/3) = 3*(2/3) = 2v.

Finally, we can multiply this value of x by 2 to get the spring's maximum compression for a speed of 2v, which is 7.6 cm.

For more questions like Spring click the link below:

https://brainly.com/question/14280940

#SPJ4

The acceleration of John during the entire motion is 1.2 m/s².

The acceleration of John during the entire motion is calculated  by applying the following formula as shown below.

a = Δv / Δt

where;

a = ( v - u ) / ( t₂ - t₁ )

a = ( 4 m/s - - 2 m/s ) / ( 10 s - 5 s )

a = ( 6 m/s ) / ( 5 s )

a = 1.2 m/s²

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

The complete question is below:

John walks away from his house at a constant speed of 2 m/s for 10 seconds , he then remembers he lost his key and immediately runs back to his house at a speed of 4 m/s in 5 seconds. find the average acceleration during the journey

The net force acting on the subway car and passengers can be calculated using Newton's second law of motion:

F = ma = 34,800 kg * 0.8 m/s^2 = 27,840 N.

So the net force is 27,840 N, or 27,840 N in magnitude.

The acceleration of the subway car as it leaves the station is 0.8 m/s2. This means that every second, the subway car's velocity is increasing by 0.8 meters per second. The acceleration is a measure of how quickly the speed of an object changes and it plays an important role in determining the net force acting on the subway car and passengers. The net force is the force that drives the subway car forward and it is calculated by multiplying the mass of the subway car and passengers by the acceleration.

To know more about Acceleration visit: https://brainly.com/question/2303856

#SPJ4

Yes, the claim is reasonable. In steady-state heat conduction, the temperature distribution in a solid cylindrical rod with constant temperature boundary conditions and insulated side surface will indeed be linear along the axis. This is because heat is conducted through the rod by diffusion and the rate of heat flow is proportional to the temperature gradient. In a cylinder, the temperature gradient is maximum at the boundaries and zero at the center, leading to a linear temperature distribution.

Temperature, or temperature is a measure of the level or degree of heat on an object. Temperature shows the level of the amount of heat energy that is in the object. Discussion: The higher the temperature of an object, the hotter it is, and the more heat energy in that object.

Learn More About Temperature at brainly.com/question/15872283

#SPJ4

The magnitude of the force exerted by the rope on the crate is 312.4 N (Newtons).

We can use Newton's second law of motion to find the net force on the crate:

[tex]\[ F_{\text{net}} = m \cdot a \][/tex]

where:

[tex]\( F_{\text{net}} \)[/tex] = net force on the crate (the force exerted by the rope)

[tex]\( m \)[/tex] = mass of the crate (40 kg)

[tex]\( a \)[/tex] = downward acceleration of the crate [tex](2.0 m/s\(^2\))[/tex]

Substitute the given values into the equation:

[tex]\[ F_{\text{net}} = 40 \, \text{kg} \times 2.0 \, \text{m/s}^2 \]\[ F_{\text{net}} = 80 \, \text{N} \][/tex]

Now, we need to consider the force of gravity acting on the crate, which is given by:

[tex]\[ F_{\text{gravity}} = m \cdot g \][/tex]

where:

[tex]\( g \)[/tex] = acceleration due to gravity [tex](approximately 9.81 m/s\(^2\))[/tex]

Substitute the given values into the equation:

[tex]\[ F_{\text{gravity}} = 40 \, \text{kg} \times 9.81 \, \text{m/s}^2 \]\\\ F_{\text{gravity}} = 392.4 \, \text{N} \][/tex]

The force exerted by the rope on the crate is equal in magnitude but opposite in direction to the force of gravity. So, the magnitude of the force exerted by the rope on the crate is:

[tex]\[ F = F_{\text{gravity}} - F_{\text{net}} \]\\\\\ F = 392.4 \, \text{N} - 80 \, \text{N} \]F = 312.4 \, \text{N} \][/tex]

The magnitude of the force exerted by the rope on the crate is 312.4 N (Newtons).

Know more about Newton's law:

https://brainly.com/question/34706880

#SPJ12

The change in potential energy of the system is given by ΔU = qΔV, where q is the charge of the point charge and ΔV is the change in potential. Plugging in the given values, ΔU = (-6.04 C)(-1.70 V) = 10.26 J.

The change in potential energy of the system can be calculated using the equation ΔU = qΔV, where q is the charge of the point charge and ΔV is the change in potential. In this problem, the charge of the point charge is -6.04 Coulombs and the change in potential is -1.70 volts. Therefore, the change in potential energy is ΔU = qΔV = (-6.04 C)(-1.70 V) = 10.268 J. To summarize, the change in potential energy of the system is 10.268 Joules.

To know more about Potential Energy visit: https://brainly.com/question/24284560

#SPJ4

The forces shown on the pole can be reduced to a single force and a single moment about the base of the pole. This is because the base is considered to be the pivot point, and all other forces and moments acting on the pole can be resolved into a single force and moment at this point.

Force in physics is any interaction that can cause an object with mass to change motion, either in terms of direction or geometric construction. Force is the push or pull exerted on an object. To perform a style, energy is needed. Force and power have different meanings, but they are related. Style cannot be seen, but its influence can be felt. The pull and push that is done requires energy.

Learn More about the formula of Force at brainly.com/question/1046166

#SPJ4

From the information given, both objects have the same surface charge density.

A two-dimensional object's area density (also known as areal density, surface density, superficial density, areic density, mass thickness, column density, or density thickness) is calculated as the mass per unit area. The kilogramme per square metre (kgm2) is the SI-derived unit. A related area number density can be established by replacing mass with a countable quantity such as the number of particles.

surface charge density() is the amount of charge per unit area measured in coulombs per square metre (Cm2) at any location on a two-dimensional surface. If q is the charge and an is the area of the surface over which it flows, the surface charge density formula is = q/A, and the S.I.

To know more about density visit:

https://brainly.com/question/6838128

#SPJ4

SOLUTION:

The kinetic energy when the rock hits the ground is 400 J.

The gravitational force acting on the rock = mg = 5 Kg × 10 m/s² = 50 N.

The net force on the rock  = 50 N - 10 N = 40 N.

By the Work energy theorem,

Work done by net force = Change in kinetic energy of rock.

Since the initial kinetic energy is zero, F × S = K₁ - K₀ ( K₀ = 0)

→ F × S = K₁

→ 40 N × 10 m = K₁

→ K₁ = 400 J.            

Learn more about the Work energy theorem here:

https://brainly.com/question/26669389

#SPJ4

The impact velocity of a stone thrown from a cliff with a certain beginning speed and angle is determined by various parameters, including air resistance, cliff height, and angle of throw.

The velocity of an object or particle with respect to time is represented as a vector. The conventional unit of velocity magnitude is the meter per second (m/s) (also known as speed). The magnitude of velocity can also be given in centimeters per second (cm/s). The velocity of a body or item defines its moving direction. Speed is a scalar number at its core. Velocity is essentially a vector quantity. It refers to the rate at which distance changes. It is the rate of change in displacement.

Here,

The vertical component of the initial velocity would also be decreased, resulting in a lower impact velocity when the stone lands. The precise impact velocity would be determined by the scenario's characteristics, such as the height of the cliff, the angle of the throw, and the air resistance encountered by the stone.

To know more about velocity,

https://brainly.com/question/14343871

#SPJ4

A fighter jet being launched from such an aircraft carrier using a steam-powered catapult and its own engines. Its engines produce 2.3 x 105 N of thrust.

What speed is reached when a jet fighter aircraft is fired from a slingshot on an aircraft carrier?

42 m/s On an aircraft carrier, a catapult is used to launch a jet fighter. Just at end of the sling, it takes 2 seconds to achieve velocity of 42 m/s. What is the catapult's length if the acceleration is constant?

How strong is the aircraft carrier's catapult?

Catapults A 48,000-pound aeroplane was launched 300 feet and increased in speed from 0 to 165 miles an hour in two seconds by four steam-powered catapults. On every

To know more about launched  visit:

https://brainly.com/question/14373252

#SPJ4

Magnetostatic fields have no divergence anywhere in space but have a set of points with non-zero curls. this indicates the presence of magnetic charges.

The electromagnetic field, which is a type of magnetostatic field, exists when there are no time-varying electric fields. These fields are produced by the existence of magnetic charges, or "magnetic monopoles", which are imaginary particles having only a magnetic charge and no electric charge. In contrast to electric fields, magnetostatic fields are represented by the curl of a vector potential, and as a result, they do not diverge anywhere in space. Since the gradient of a scalar potential is what defines electric fields, they never have a zero divergence.

However, at some points in space, a magnetostatic field's curl might not be zero, indicating the presence of magnetic charges. The right-hand rule, which states that the thumb points in the direction of the field lines if the right hand's fingers are curled in the direction of the field's curl, can be used to describe the behavior of field lines in a magnetostatic field. In other words, the size of the curl at a particular place depends on the intensity of the magnetic charge there. In a magnetostatic field, field lines coil around magnetic charges.

In contrast, because electric fields are defined by the gradient of a scalar potential, they have field lines that are radial and point away from positive charges and in the direction of negative charges. Since magnetostatic fields do not diverge, they are conservative, scalar potential-explainable fields that do not change over time. Since the strength and placement of magnetic charges can be inferred from the curl of the field, they are advantageous in applications like magnetic imaging.

Magnetic materials and magnetostatic fields are closely related. For instance, in magnetic elements like iron, cobalt, and nickel, unpaired spin electrons produce magnetic moments. A magnetic field is created when these magnetic moments line up in the same direction.

The magnetostatic field is produced in this case by the interaction of the magnetic moments with the curvature of the field, which causes the field lines to bend inward around the magnetic moments. Given that they have a set of non-zero curl points but no divergence and that their behavior can be explained by the right-hand rule and scalar potential, it is assumed that magnetostatic fields are coiling around magnetic charges. This is related to magnetic materials' behavior and explains why they are useful in some electromagnetic applications.

Understanding the behavior of magnetostatic fields is essential for a range of applications, such as electromagnets, magnetic storage systems, and magnetic imaging technologies.

Learn more about magnetic fields here:

https://brainly.com/question/14411049

The vehicle that undergoes the greatest change in velocity will be the mack truck.

A head-on collision occurs when the front ends of two moving objects, such as cars, trains, ships, or aeroplanes, collide while moving in the opposite direction.

A mack truck and a Volkswagen are moving at the same speed.

They collide head on collision.

The vehicle that undergoes the greater change in velocity is to be found out.

Due to the nature of the vehicle, the Volkswagen will experience a bigger shift in velocity following the impact. Compared to the truck's weight, the Volkswagen is lighter. Volkswagen is lighter due to streamlining.

To know more about velocity:

https://brainly.com/question/14103967

#SPJ4

The velocity of the water in the circular pipe is v2 = v1 / π, where v1 is the velocity of the water in the square pipe.

The velocity of water in the circular pipe can be determined using the principle of conservation of mass and the equation of continuity. The equation of continuity states that the product of the cross-sectional area of a pipe and the velocity of the fluid flowing through it must be constant.

For the square pipe, the cross-sectional area is given by A1 = a^2, and for the circular pipe, the cross-sectional area is given by A2 = πr^2 = πa^2.

So, we can write the equation of continuity as:

A1 * v1 = A2 * v2

Substituting the values for A1 and A2, we get:

a^2 * v1 = πa^2 * v2

Solving for v2:

v2 = v1 / π

To know more about the velocity of water, check out

https://brainly.com/question/28595543

#SPJ4

When switching from a lower power objective to a higher power objective on a bright-field microscope : amount of light decreases. Higher power objective has smaller lens and so less light penetrates.

Bright-field microscopy is the simplest of all optical microscopy illumination techniques and sample illumination is transmitted white light, and contrast in sample is caused by attenuation of transmitted light in dense areas of sample.

Its simplicity makes it a popular technique. Appearance of bright-field microscopy image is dark sample on bright background. Light path of a bright-field microscope is extremely simple and no additional components are required beyond normal light-microscope setup.

To know more about bright-field microscope, refer

https://brainly.com/question/948960

#SPJ4

Water freezes at 32 degrees Fahrenheit, 0 degrees Celsius, and 273.15 Kelvin, as we have all been taught.

Due to the salt in seawater, it freezes at a lower temperature than fresh water—approximately 28.4 degrees Fahrenheit. However, because only the water part of seawater freezes, a very little salt is present in the ice when it is formed.

The Kelvin scale, which measures temperatures in Kelvin, is frequently used by scientists, particularly those who investigate what happens to things when they get extremely cold (K). The steps on this scale are the same as those on the Celsius scale, however, they are moved downward. Water freezes at 273 K and boils at 373 K on this scale.

to know more about a freezing point here:

brainly.com/question/3121416

#SPJ4

If the system reaches the given state then all the properties of the system have fixed values.

The state of a thermodynamic system is defined by a number of state variables, including internal energy U, entropy S, and temperature. The first two thermodynamic variables are functions of the state variables. Intuitively, the state of a system describes the system enough to determine its future behavior in the absence of external forces affecting it. A model consisting of coupled first-order differential equations is called a state variable. According to the so-called state postulate, a simple compressible system is completely specified by two independent central properties. The following thermodynamic properties are usually considered independent variables:

pressure, specific volume, and temperature. 

Learn more about thermodynamics in

https://brainly.com/question/1604031

#SPJ4

A wire carrying electrons experiences a 1A current. How many electrons traverse a wire's cross - sections every second. This is a somewhat easy but challenging task.

The definition of "current" as given by Techopedia What Does It Mean, Today?

Electrons are one type of electrical charge carrier that flow as current. Current flows from positive to good elements. The SI unit for measuring electric current is the ampere (A). One ampere of current is the amount of electrical current that crosses a specific area in one second and has the color pink.

What stands in for the moment?

The letter I, which is derived from the French term translation initiation du courant, is often used to denote current (current intensity). Current intensity is usually described by the word "current." The electric current unit's inventor André-Marie Ampère used the I symbol to create his force law (1820).

To know more about current visit:

https://brainly.com/question/1851832

#SPJ4

The person will experience a greater force of centripetal acceleration when they are positioned on the edge of the merry-go-round.

Centripetal acceleration is the acceleration that acts towards the centre of a circle and is required to maintain an object in circular motion. It is a type of acceleration that is directed towards the centre of the circle and is perpendicular to the velocity of the object.

The formula for centripetal acceleration is given by:

a = v^2 / r

where a is the centripetal acceleration, v is the velocity of the object, and r is the radius of the circular path.

In simple terms, centripetal acceleration is what keeps an object moving in a circular path. It is the result of a force that acts towards the centre of circle and is proportional to the square of the object's velocity and inversely proportional to the radius of the circle.

In context to the above statement

When the person is positioned on the edge of the merry-go-round, the radius of their circular path is at its maximum. As the radius increases, the velocity required to maintain circular motion also increases. Therefore, the centripetal acceleration experienced by the person is greater on the edge compared to when they are positioned close to the centre.

To know more about centripetal acceleration, visit:

https://brainly.com/question/79801

#SPJ1

The five planets listed in order of the strength of the wind erosion that is currently occurring on their surfaces are EARTH, VENUS, MARS, MOON, and MERCURY.

Contrary to popular belief, Earth does not possess a recognized international name. "Terra" is only a widespread misunderstanding of the planet's scientific name. Earth is the planet's commonly used name in English, including in science.

Our own planet, Earth, is a world unto itself. Earth, the third planet around the sun, represents the only place as in known cosmos where the presence of life has been established. Earth is really the fifth biggest planet within the solar system with the a radius of accredited miles, and it is the only one whose existence is known for definite.

To know more about Earth visit:

brainly.com/question/14439844

#SPJ4

In relation to a line drawn exactly across the river, the angle at which the motorboat is moving, as a result, is 53.1°.

According to the question;

Finding the resulting angle between the motorboat's motion direction and a line drawn directly across the river is the solution to the problem.

The motorboat's speed may be represented by the vector (v₁) = 4 m/s in the east

The river's speed by the vector (v₂) = 3 m/s in the north.

The motorboat's final speed is determined by adding these two speeds together:

v = v₁ + v₂.

v = (3 m/s)j + (4 m/s)i

The inverse of the tangent function may be used to calculate the angle θ between the direction of the resulting velocity and a straight line across the river:

θ = tan^-1 (v₂/v₁) = tan^-1 (3/4)

⇒ θ = 0.93 radians or 53.1°

Therefore, the motorboat's direction of travel is at an angle of 53.1° with respect to a line that is drawn immediately across the river.

To know more about relative motion here:

https://brainly.com/question/15836528

#SPJ4

Energy conversion devices do not follow the equation Overall Energy Intake = Energy Output / Efficiency.

Energy is the capability to accomplish labor. The amount of labor an organism's stored energy is capable of performing after it is expended. energy is a scalar quantity. The term "joule" refers to the SI unit of energy. The quantity of energy required to do one photon of activity is one joule.

Scientists refer to energy as the ability to work. Modernity is feasible because people have learned how to transfer information from one media to another and then use it to complete tasks.

To know more about Energy visit:

brainly.com/question/25959744

#SPJ4

The knights on a castle wall (12 meters above the earth) are attacked by flying cannonballs at a velocity of 15.3m/s. In response, they fire flaming pitch balls at their attackers.

The initial speed of the flaming pitch ball can be calculated using the equation for projectile motion:

v^2 = u^2 + 2as where v is the final velocity, u is the initial velocity, a is acceleration due to gravity (9.8 m/s^2), and s is the distance traveled.

The distance where one ball landed is (s) = 50.0 m

The acceleration is (a) = -9.8 m/s^2 (negative because acceleration is downward)

v = 0 (final velocity is zero when it hits the ground)

Let the initial velocity = u

Plugging these values into the equation we get:

u^2 = 0 + 2(-9.8)(12)

u^2 = -235.2

u = √(-235.2)

u = 15.3 m/s

To learn more about velocity click here https://brainly.com/question/18084516

#SPJ4

1. Fat produces 9 food calories per gram.

2. Carbohydrate produces 4 food calories per gram.

3. Protein  produces 4 food calories per gram.

The term "calorie" and the symbol "cal" usually generally refer to the big unit in nutrition and food research. It is typical practice to describe the energy content of foods in terms of serving size or weight, the recommended daily calorie intake, metabolic rates, etc. on package labels and in publications.

To prevent misunderstanding, some authors advise using the capital C-spelled terms Calorie and Cal instead of other terms. This standard, however, is frequently disregarded.

Learn more about calorie here:

https://brainly.com/question/22374134

#SPJ1

The grain fall or settling velocity is the speed at which a single grain of sediment falls through a fluid under the influence of gravity. It is determined by the size, shape, and density of the grain, and the fluid properties such as temperature, viscosity, and fluid density.

Grain suspension occurs when the upward fluid velocity exceeds the settling velocity of the grain, causing the grain to remain suspended in the fluid and not settle to the bottom. This can occur in a variety of natural systems, such as rivers and oceans, and is an important factor in the transport of sediment in these systems.

Gravity is one type of force that is affected by the force of attraction of an object to the center of the object. Therefore the notion of the gravitational force of the earth is the pulling force of an object towards the center of the earth. The force of gravity is very important for living things, including humans. We certainly cannot live on Earth without gravity. Reporting from NASA, the force of gravity keeps the Earth orbiting the Sun so that all living things can enjoy the sun's light from a comfortable distance.

Learn More About Gravity at brainly.com/question/28033170

#SPJ4