For motion along a straight line it ______ possible for speed to be constant while acceleration is not zero.

Answers

Answer 1

For motion along a straight line it NOT possible for speed to be constant while acceleration is not zero.

If the acceleration is not zero means that the speed has changed whether to higher (positive acceleration) or lower (negative acceleration) if the object is slowing down.

When the speed is constant, it means that the velocity at the beginning of the motion and the velocity at the ending of the motion are the same.

What is acceleration?

It is a physical quantity that indicates the variation of velocity as a function of time, it is expressed in units of distance per time squared e.g.: m/sec2 ; km/h2

Learn more about acceleration at: brainly.com/question/14344386

#SPJ4

For Motion Along A Straight Line It ______ Possible For Speed To Be Constant While Acceleration Is Not

Related Questions

During each cycle of operation, a refrigerator absorbs 257 j of heat from the freezer and expels 465 j of heat to the room. how much work input is required in each cycle?

Answers

Work input is required in each cycle w = 208j

Here can explain as ,according to the law of conservation of energy , the total heat given off the surrounding by a refrigerator is equal to the work done by the refrigerator and the heat removed from the inside of a refrigerator .i.e. the addition of heat removed or absorbs and work done by the refrigerator is equal to the heat expelled to the room during each cycle. It can be shown as ,

[tex]Q_{h}[/tex] =[tex]Q_{c}[/tex] + [tex]W[/tex]

Where,

 [tex]W[/tex] is work input of refrigerator during each cycle.

[tex]Q_{c}[/tex] is the heat removed or absorbed by the refrigerator.

[tex]Q_{h}[/tex] is heat expelled to the room during each cycle.

Given here,

[tex]Q_{c}[/tex] =  257 j

[tex]Q_{h}[/tex] =  465 j

Therefore from above equation can be find the value of work input by the refrigerator in each cycle,

[tex]W[/tex] =[tex]Q_{h}[/tex] - [tex]Q_{c}[/tex]

w = (465 j) -(257 j)

w= 208j

To know more about refrigerator.

https://brainly.com/question/24277285

#SPJ4

A car initially traveling at 15 m/s North accelerates to 25 m/s North in 4 seconds. The magnitude of the average acceleration is?

Answers

The average acceleration of the car as it accelerates from 15 m/s to 25 m/s will be 2.5 m/s².

What is Average acceleration?

Average acceleration is the average rate of change of velocity with respect to time. Mathematically -

a = Δv/Δt

Given that a car is traveling at 15 m/s in north direction and in 4 seconds it accelerates to 25 m/s in the north direction only. Therefore, we can write -

initial velocity [u] = 15 m/s

final velocity [v] = 25 m/s

time taken [Δt] = 4 s

The magnitude of the average acceleration can be calculated as follows-

a = Δv/Δt

Δv = v - u = 25 - 15

Δv = 10 m/s

Therefore -

a = 10/4

a = 2.5 m/s².

Therefore, the average acceleration of the car will be 2.5 m/s².

To solve more questions on Acceleration, visit the link below-

https://brainly.com/question/21300541

#SPJ1

The operation of preparing illustrations for enlargement or reduction is known as:_____.

Answers

Proportional scale or Proportion wheel are terms used to describe the process of preparing illustrations for expansion or reduction.

A proportionate scale is a logarithmic scale with indicated portions that are proportional to the natural number logarithms.Graphic designers utilize a traditional proportion wheel, often known as a proportion scale, to adjust an image to fit within a specified width (or height).In general, the goal is to keep the same aspect ratio while translating a picture with a specific width and height to prevent distortion.

What is the proportional principle?

The relationship between two or more elements in a design and how they stack up against one another is known as proportion. When there is a proper size or quantity relationship between the elements, proportion is said to be harmonic.

To learn more about Proportional scale , visit:

https://brainly.com/question/12846558

#SPJ4

A car of weight 3,217 lb is traveling in a straight line at a speed of 60 ft/s. how much force does it require to stop the car in 5 seconds? assume that the gravitational acceleration is 32.17 ft/s2.

Answers

Answer:

in this problem, we have given a card of wait. £3217 is traveling in a straight line at a speed of 60 ft/s. How much force does it require to stop the car in five seconds. So here we will use a cinematic equation. We finally, is it caused to the initial plus acceleration in two times. So finally, spirit will be zero initially 60 ft/s and exhalation. We have to find And time is five seconds. Right? So we need acceleration, Which is a cost to -60 x five. That is a cost to 12 feet per second square. That means we need acceleration in the opposite direction, so we need a force which is in the opposing direction of the motion. So this force, if we talk about the magnitude, there should be equal to mass into acceleration. So this mass of card will be weight divided by G, into exploration. That is 12 serve it of cars, and 3217, And G is 32.17 in 212. So this force in pounds is equal to £1200 in the opposite direction of motion.

Explanation:

The force required to stop the car is 5334.09 Newtons. The force is negative representing the deceleration.

The car's weight to mass:

Weight = 3,217 lb

1 lb = 0.453592 kg

Mass = Weight ÷ gravitational acceleration

Mass = 3217 × 0.453592

Mass = 1459.59 kg

The initial velocity is:

Initial velocity = 60 × 0.3048

Initial velocity = 18.288 m/s

Since the car stops, the final velocity will be 0 m/s.

The acceleration is:

Acceleration = (Final velocity - Initial velocity) ÷ time

Acceleration  = -3.6576 m/s²

The force required to stop the car using Newton's second law of motion:

Force = m × a

Force = 1459.59 × (-3.6576)

Force = -5334.09 N

Therefore, The force required to stop the car is 5334.09 Newtons. The force is negative representing the deceleration.

To know more about the force:

https://brainly.com/question/13191643

#SPJ7

Signal at least ____ before making a turn.
a) 2 blocks
b) 10 feet
c) 20 feet
d) 100 feet

Answers

The correct option is (d) 100 feet

Signal at least 100 feet before making a turn.

Before stopping, turning, or changing lanes, signal to other drivers so they are aware of your impending action. You can signal with your hand, arm, or your car's turn signals and brake lights. You should signal at least 100 feet before your turn so that other vehicles have time to adjust. You should turn from the lane that is closest to the direction you wish to go and into the lane that is closest to the one you came from if there are no signs or lane markers to restrict turning. You'll cross the fewest number of lanes of traffic in this manner. When making turns, switch lanes as smoothly as you can without going over the lane lines or obstructing the flow of traffic.

Learn more about the safety driving with the help of the given link:

https://brainly.com/question/17009381

#SPJ4

Ines of latitude run from _______________ and measure angular distances ___________ of the equator.

Answers

Ines of latitude run from East to West and measure angular distances North or South of the equator.

The latitude defines a geographical coordinate of a location on the earth's surface and is the angular distance of that point (north or south of the equator) measured with respect to the Earth's Center. It is zero at the equator and 90 degrees at the poles. Latitude lines, often known as parallels, are imaginary lines that divide the Earth. They go east to west, although you may measure north or south. The most well-known parallel is the equator. It splits the Earth into Northern and Southern hemispheres at 0 degrees latitude. Latitude increases as you move north or south from the equator, reaching 90 degrees at either pole.

To learn more about latitudes. Click, https://brainly.com/question/20689866

#SPJ4

If you exert a force f on an object which has a much greater mass than you do, the force which the object exerts on you will?

Answers

If you exert force on an inanimate item, you will also be able to calculate the force that the object will apply to you, which will be opposing and equal to your own.

What would happen if you applied a force that was smaller than the object's mass?

In order to accelerate a heavier (more massive) item in motion, more force must be exerted. When two objects are subjected to the same force, the smaller mass item will change speeds more quickly.

An item can alter its size or shape, begin moving, stop moving, accelerate, or decelerate as a result of a force acting on it. When two things contact, they exert pressures on one another that are identical in size but directed in the opposite direction

The action-reaction law is another name for this rule.

When just one body decides the strength and direction of the force, the force that body exerts is referred to as the "action," and the force that the other body exerts in a similar but opposite direction is referred to as the "reaction."

learn more about action-reaction law refer

https://brainly.com/question/1430348

#SPJ4

Consider the reaction, 2 d(g) 3 e(g) f(g) => 2 g(g) h(g) when d is decreasing at 0.69 mol/ls, how quickly is f decreasing? give your answer to 3 decimal places.

Answers

The compound f is increasing at the rate of 0.46 mol per second.

The number of moles of a compound is defined as the mass of the compound divided by its molecular mass. The SI unit of the number of moles is mol. The number of moles is represented by the symbol 'n'.

[tex]Number \: of \: moles = \frac{ Mass}{ Molecular \: mass}[/tex]

[tex]n = \frac{m}{M} [/tex]

The balanced equation for the reaction is,

2 d (g) + 3 e (g) + f (g) => 2 g (g) + h (g)

In the reaction, 3 moles of compound e are consumed to give 2 moles of compound g.

For 1 mole of compound e consumed to form =

[tex] \frac{2}{3} \: moles \: of \: g \: formed.[/tex]

The compound e is decreasing at the of = 0.69 mol/s

So, the rate at which g is increasing is,

[tex] = \frac{2}{3} \times 0.69[/tex]

[tex]= 0.46 \: mol/ s[/tex]

Therefore, compound f is increasing at the rate of 0.46 mol per second.

To know more about moles refer to the below link:

https://brainly.com/question/26416088

#SPJ4

Calculate the mass of wood that has the same energy as 1 g of oil

Answers

2.3 grams of wood has the same energy as 1g of oil.

The majority of wood and wood waste used as fuel in the United States is used by industry. Manufacturers of paper and wood products are the biggest industrial users. They produce steam and electricity from waste from paper and lumber mills, which saves money by lowering the number of other fuels and electricity they need to buy to run their facilities.

There are numerous power plants that primarily burn wood to produce electricity in the electric power sector, and some coal-burning power plants burn wood chips along with coal to cut down on sulfur dioxide emissions. The primary purpose of wood consumption in the business sector is heating.

To learn more about wood please visit-

https://brainly.com/question/10967023

#SPJ9

List three equations (relationships) describing free falling objects in gravitational fields.

Answers

The three equations for describing free-falling objects in gravitational fields are given below:

h = ut + ¹/₂ g * t²v² = u² + 2 * g * hv = g * t

What is free fall?

Free fall refers to the motion of a body that is at a certain height above the surface of the earth and which is allowed to fall or move vertically downwards under the influence of gravity alone.

Gravity is the attractive force with which the earth attracts objects to its surface.

Objects that are attracted to the surface of the earth by gravity are given an acceleration g, known as acceleration due to gravity.

The value of the acceleration due to gravity, g = 9.8 m/s²

The equations for describing free-falling objects in gravitational fields are given below:

h = ut + ¹/₂ g * t²v² = u² + 2 * g * hv = g * t

where;

h = height above ground

u is the initial velocity

v s final velocity

t is time

g is to acceleration due to gravity

Learn more about free fall at: https://brainly.com/question/12167131

#SPJ1

An ideal step-up transformer doubles a primary voltage of 110 v. what is the ratio of the number of turns in its primary coil to the number of turns in the secondary coil?

Answers

Ratio of the no. of turns in primary coil to the no. of turns in the secondary coil is 1:2

Transformer -

A device used in the power transmission of electric power.

It is commonly used  to increase or decrease the supply voltage without changing the frequency of AC b/w circuit.

In simple word transformer is a thing that steps up or steps down voltage.

In step up transformer-

The output voltage is increased.

The secondary output voltage is higher that primary voltage.

In step down transformer-

The output voltage is decreased.

These are used to convert the high voltage primary supply to low voltage secondary output.

In step up transformer

N₁/N₂= V2/V₁= I₁/I₂ (equation 1.)

A ideal step up transformer double the primary voltage

Then Vs = 2 Vp

Using in equation 1. We get

Vp/Vs = N1/N2

Vp/2Vp = N1/N2

N1/N2 = 1/2

N1 : N2 = 1:2

Ratio of the no. of turns in primary coil to the no. of turns in the secondary coil is 1:2

To know more about transformer :

https://brainly.com/question/3900356

#SPJ4

During the resting phase, what is the electric potential energy of a typical na ion outside of the cell?

Answers

During the resting phase,  −80 mV is the electric potential energy of a typical Na ion outside of the cell

What do you understand by electric potential energy ?

The power required to move a charge in opposition to an electric field is known as electric potential energy. A charge must be moved through a stronger electric field with more energy, but it also must be moved through a weaker electric field with more energy.

You cannot see the charge that is waiting to pass through the wires when a light switch is off. That is but one illustration of electric potential energy. Other instances include: a switched-off incandescent light bulb.

To learn more about the electric potential energy, visit: https://brainly.com/question/24043857

#SPJ4

Ordered: vistaril 75 mg im now. used with permission from pfizer, inc how many ml will you give for each dose?

Answers

Option c) 1.5 ml of volume will be given for each dose.

How does Vistaril work and what does it do?

The prescription drug Vistaril is used as preoperative sedation, to treat anxiety symptoms, and to cure skin hives or itching. Vistaril may be taken either on its own or along with other drugs.

The class of medications that includes Vistaril includes antiemetic agents, first-generation antihistamines, and piperazine derivative antihistamines.

What Vistaril side effects might there be?

Serious adverse reactions to Vistaril include:

Heartbeats that are rapid or hammering, headaches accompanied by chest pain, extreme dizziness, fainting, and convulsions (seizures)

Immediately seek medical attention if you experience any of the above symptoms.

The most typical Vistaril side effects include:

Fatigue, headache, dry mouth, and rash on the skin

To know more about Vistaril, visit:

https://brainly.com/question/19567325

#SPJ4

The magnitude of f is 302 newtons and it points at 149o measured counterclockwise from the positive x-axis. what is the y component (in newtons) of f?

Answers

The force on the y-component is 227.92 N. suppose the x-axis force is 302 N counter clockwise and points at 149 degrees.

Given:

[tex]Force\;on\;x-axis,\;f =302\;N[/tex]

[tex]Angle,\;\theta=149^{\circ}[/tex]

We know that, Force on y-axis,

[tex]f_{y}=f\;sin\;\theta[/tex]

[tex]f_{y}=302\;sin\;\149^{\circ}[/tex]

[tex]f_{y}=227.92\;N[/tex]

Hence, the force acting on the y-component is 227.92 N.

Define Components of force in a vector?

Components of force in a vector are the magnitude and direction of each component. In other words, they provide information on how much push/pull is being exerted by an object on another object or person. Generally speaking, these components can be classified into two categories:

Anchor (A): The anchor represents the force that pulls objects together. It usually corresponds to the gravitational pull between two masses or large projectiles.

Magnitude (M): This refers to how strong the force is – greater numbers mean stronger forces.

To learn more about Forces, visit:

https://brainly.com/question/26115859

#SPJ4

A ray of light in air strikes a glass surface. is there a range of angles for which total internal reflection occurs? explain.

Answers

No, there is no range of angles for total internal reflection(TIR).

What is total internal reflection?

Total internal reflection (TIR) is an optical phenomenon when waves arriving at the interface (boundary) of two media, such as water and air, are entirely reflected back into the first (internal) medium rather than being refracted into the second (external). It happens when the waves are incident on the interface at a suitably oblique angle and the second medium has a higher wave speed (i.e., lower refractive index) than the first. TIR occurs not only with electromagnetic waves like light and microwaves but also with other types of waves, including sound and water waves. For instance, the water-to-air surface in a typical fish tank, when viewed obliquely from below, reflects the underwater scene like a mirror with no loss of brightness.

To know more about total internal reflection, visit:

https://brainly.com/question/13197033

#SPJ4

For customer arrivals, the random number interval assigned to the time between arrivals of 2 minutes is:_________

Answers

For customer arrivals, the random number interval assigned to the time between arrivals of 2 minutes is 0.0500-0.19999.

What do you mean by time?

Time is the continued sequence of the existence and events that occurs in an apparently irreversible succession from the past, through the present, into the future. It is a component quantity of the various measurements used to sequence events, to compare the duration of events or the intervals between them, and to quantify rates of change of quantities in material reality or in the conscious experience. Time is often referred to as a fourth dimension, along with the three spatial dimensions.

Time has long been an important subject of the study in religion, philosophy, and science, but defining it in a manner applicable to all fields without circularity has consistently eluded scholars. Nevertheless, diverse fields such as the business, industry, sports, the sciences, and the performing arts all incorporate some notion of time into their respective measuring systems.

Time in physics is operationally defined as the "what a clock reads".

The physical nature of the time is addressed by general relativity with respect to events in spacetime. Examples of events are collision of two particles, the explosion of a supernova, or the arrival of a rocket ship. Every event can be assigned the four numbers representing its time and position (the event's coordinates).

However, the numerical values are different for the different observers. In general relativity, question of what time it is now only has meaning relative to a particular observer. Distance and the time are intimately related, and the time required for light to travel a specific distance is the same for all observers, as first publicly demonstrated by Michelson and Morley. General relativity does not address nature of time for extremely small intervals where quantum mechanics holds. At this time, there is no generally accepted theory of the quantum general relativity.

To know more about time visit : https://brainly.com/question/15356513

#SPJ4

What potential difference must be applied to an x-ray tube to produce x-rays with a minimum wavelength of 45.0 pm?

Answers

The potential difference of 2.7 x [tex]10^{4}[/tex] volts is needed.

We have an X - Ray tube to produce X - Rays.

We have to determine what potential difference to produce X-rays with a minimum wavelength of 45.0 pm ?

What is an X - Ray ?

An X - Ray is an electromagnetic wave of high energy and very short wavelength, which is able to pass through many materials opaque to light.

According to the question, we have -

λ = 45 pm = 4.5 x [tex]10^{-11}[/tex] meter

h = 6.63 × [tex]10^{-34}[/tex]Js

c = 3 x [tex]10^{8}[/tex] m/s

We know -

E = hv

where v is frequency.

E = [tex]$\frac{hc}{\lambda}[/tex]

When accelerated through a potential difference of say V volts, then -

E = E(k) = eV

Therefore -

eV =  [tex]$\frac{hc}{\lambda}[/tex]

V = [tex]$\frac{hc}{e\lambda }= \frac{6.63\times 10^{-34} \times 3\times 10^{8} }{1.6\times 10^{-19} \times 4.5 \times 10^{-11} }[/tex] = 2.7 x [tex]10^{4}[/tex] volts

Hence, the potential difference of 2.7 x [tex]10^{4}[/tex] volts is needed.

To solve more questions on X-rays, visit the link below-

https://brainly.com/question/16814407

#SPJ4

The discovery of ribozymes provide evidence that life on the early earth may have been based on:_________

Answers

The discovery of ribozymes provide evidence that life on the early earth may have been based on RNA world hypothesis.

Origins of Life and the RNA World

We must think about how these mechanisms developed during evolution in order to completely comprehend the processes taking place in modern living cells.

The production of genetic information, which today requires incredibly complicated machinery and travels from DNA to protein via an intermediary called RNA, is the most fundamental of all such issues.

How did this equipment come to be?

One theory holds that there was an RNA world on Earth before contemporary cells emerged. This is the hypothesis.

RNA was a genetic information repository and a catalyst for chemical reactions in the earliest cells.

Proteins took over as the main catalytic and structural component of cells considerably earlier in the evolutionary process than DNA, which didn’t become the major genetic component until much later. If this hypothesis is correct, the departure from the RNA world was never truly complete.

To know more about RNA World visit:

https://brainly.com/question/25979866

#SPJ4

Stare at a piece of bright colored paper for 45 seconds or so. then look at a plain white surface. what do you see?

Answers

Your blue receptors will become fatigued if you stare at a blue image for too long, and the afterimage will be the opposite colour: orange.

Why do we first perceive blue and then yellow?

A yellowing of the optical medium of the eye causes Xanthopsia, a colour vision impairment in which blue dominates in perception. Digoxin's inhibition of the sodium pump as well as cataract formation, which can have the effect of a yellow filter, are the most frequent causes.

A blue-green, or cyan, afterimage of the same size and form can be seen if you stare at a red item and then look at a white region shortly after.

Digibind or Digifab, also known as digoxin-specific antibody antigen-binding fragments (DSFab), are a potent antidote that binds digoxin directly.

learn more about Xanthopsia refer

https://brainly.com/question/28327258

#SPJ4

The approach that makes use of rational and systematic reasoning to answer the great questions of life and existence is known as:________

Answers

The approach that makes use of rational and systematic reasoning to answer the great questions of life and existence is known as:

Socratic method.

The socratic method Worst drive from the Greek philosopher socrates.

It is a method of hypothesis elimination in that we found quickly identifying and eliminating those leads to contradictions.

This method is also known as elenctic method, socratic debate

Socrates applied his method of examination generally to find the concepts that seems to lack any concrete definition.

socratic method is also known as question answer method.

in his case this personal investigation arguments assume a form of dialogue that's why we said it question answer method.

The approach that makes use of rational and systematic reasoning to answer the great questions of life and existence is known as:

Socratic method.

To know more about methods

https://brainly.com/question/13189301

#SPJ4

If the wavelength of the photon of light absorbed by a hydrogen atom has a value of 1.0952 x 10-6 m, and the electron starts at level n = 3, what is the level (n) of the final state of the electron?

Answers

The level (n) of the final state of the electron n₂ = 6

What does a photon mean in science?

a photon, also known as a light quantum, is a very small energy package of electromagnetic radiation. When explaining the photoelectric effect in 1905, Albert Einstein proposed the potential of energy levels packets during the transmission of light.

What is an electron?

A negatively charged subatomic component called an electron can be either attached to or detached from an atom (not bound). Protons, neutrons, and electron that is bonded to the atom make up the three basic types of particles that make up an atom. Protons, neutrons, and electrons make up the nucleus of an atom.

According to the given information:

An atom of hydrogen has a value of 1.0952 x 10-6 m

starting at level 1, the electron n = 3

what is the electron's final state level (n).

[tex]\frac{1}{\lambda}=\bar{v}=R_H\left(\frac{1}{n_1^2}-\frac{1}{n_2^2}\right)[/tex]

λ =   1.0952 x 10⁻⁶m

  = 1.0952 x 10⁻⁴cm

R[tex]_H[/tex] = 109677cm⁻¹

n₁ = 3

n₂ = ?

Putting the value in the formula:

we get,

1/1.0952 x 10⁻⁴ = 109677cm⁻¹[tex]\left(\frac{1}{3^2}-\frac{1}{n_2^2}\right)[/tex]

0.0833 = 1/9 - 1/(n₂)²

(n₂)² = 1/0.0278

n₂ = 6

The level (n) of the final state of the electron n₂ = 6

To know more about electron visit:

https://brainly.com/question/1255220

#SPJ4

A semiconductor device containing transistors, capacitors, and resistors is called a:____.
a. difference engine.
b. a diode.
c. an integrated circuit.
d. a radio.
e. a transformer.

Answers

Option C: A semiconductor device containing transistors, capacitors, and resistors is called an integrated circuit.

Transistor

The semiconductor device known as a transistor is used to switch or amplify electrical impulses.

One of the fundamental components of contemporary electronics is the transistor. It is made of semiconductor material and typically has at least three terminals for connecting to an electronic circuit.

The current flowing through another pair of the transistor’s terminals is controlled by the voltage or current provided to one set of those terminals.

A transistor can magnify a signal because the regulated (output) power can be greater than the controlling (input) power. Although many more transistors are found embedded in integrated circuits, some are packaged individually.

The first field-effect transistor was developed in 1947 by American physicists John Bardeen and Walter Brattain while working for William Shockley at Bell Labs.

The concept of a field-effect transistor was first proposed by the Austrian-Hungarian physicist Julius Edgar Lilienfeld, but it was not possible to actually build a working device at that time. The three received a shared 1956 Nobel Prize in Physics for their achievement.

To know more about semiconductors, visit:

https://brainly.com/question/15184439

#SPJ4

Electromagnetic (em) radiation penetrates the atmosphere of earth at what portions of the electromagnetic spectrum?

Answers

Longwave radiation is the name given to the infrared component of the spectrum of radiation that Earth emits; its usual wavelengths range from 4 to 30 micrometers (0.0002 to 0.001 inch).

The electromagnetic spectrum is made up of radio waves, microwaves, infrared light, visible light, ultraviolet light, X-rays, and gamma rays, among other types of electromagnetic radiation. The earth's atmosphere blocks out the majority of electromagnetic radiation from space, preventing most of it from reaching the planet's surface.

Visible light is electromagnetic radiation with wavelengths between 400 and 700 nm. A portion of the electromagnetic spectrum that humans can see with our eyes is the visible light or spectrum. The outside of Earth. Effectively, visible light can pass through Earth's atmosphere.

Learn more about electromagnetic spectrum here-

https://brainly.com/question/23727978

#SPJ4

A plane accelerates from rest at a constant rate of 5. 00 m/s2m/s2 along a runway that is 1800 mm long. Assume that the plane reaches the required takeoff velocity at the end of the runway. What is the time ttotto needed to take off?.

Answers

The time needed to take off is 0.8s

What is Acceleration ?

Acceleration can be defined as the rate of change of velocity. It is a vector quantity.

Given that a plane accelerates from rest at a constant rate of 5.0 m/s² along a runway that is 1800 mm long. Assume that the plane reaches the required takeoff velocity at the end of the runway.

The takeoff velocity V will be

V² = U² + 2aS

Where

U = 0 since it accelerated from resta = 5 m/s²S = 1800 mm = 1.8 mV = ?

Substitute all the parameters into the formula above

V² = 0 + 2 × 5 × 1.8

V² = 18

V = √18

V = 4.24 m/s

The time t needed to take off will be

V = U + at

4.24 = 0 + 5t

5t = 4.24

t = 4.24 / 5

t = 0.8 s

Therefore, the time needed to take off is 0.8s

Learn more about Time here: https://brainly.com/question/10428039

#SPJ1

A water pump with a power of 3.4 × 102 watts lifts water at the rate of 7.5 × 10-2 meters/second from a water tank. What is the force exerted by the pump on the water?

Answers

Answer:

P = W / t         work / time = power

P = F * S / t

F = P t / S       force required

F = P / (S / t)            since given .075 meters / sec

F = 340 J/sec / .075 m/sec = 4530 J / m = 4530 Newtons

The lung volume that represents the maximum amount of exchangeable air is the _____

Answers

The lung volume that represents the maximum amount of exchangeable air is the: vital capacity

The vital capacity is the volume of air that can be taken into the lungs by inhaling and expelling air by inspiration and expiration. it is also known as (VC).

The value of the VC is around 4800 mL and it varies according to the age and body size. The formula to calculate the vital capacity is:

VC = TV+IRV+ERV

Where:

TV = tidal volumeIRV = inspiratory reserve volumeERV = expiratory reserve volume

What are the lungs?

The lungs are one of the largest organs of the body and are in charge of the respiratory function. They have a spongy appearance and are located in the thorax, protected by the ribs, one on each side of the heart.

Learn more about the lungs at: brainly.com/question/27010145

#SPJ4

Country and country produce the consumption goods and capital goods and currently have identical production curvesthey also have the resources they have to the same present, country have a comparative advantage in producing goods?

Answers

Both countries will have the same advantage in producing goods if they produce the consumption goods and capital goods and currently have identical production curves.

What does the theory of comparative advantage state?

According to the theory of comparative advantage, a person should participate in an economic activity in which they have a comparative advantage, i.e., in which they are more effective than in the other activity. In terms of economies, they should engage in the production of those commodities and services at which they are better placed than the other.

Which country will have the comparative advantage in producing capital goods?

The output potential, resource level, and technological level of two nations A and B are identical. This suggests that both countries A and B are producing at the same level and that neither one is doing better than the other in terms of production.

To know more about comparative advantage visit:

https://brainly.com/question/7780461

#SPJ4

An inert atmosphere was obtained by adding nitrogen in a room that measures and has a 8.00 ft ceiling. how many liters of nitrogen were used to fill the room?

Answers

An inert atmosphere was obtained by adding nitrogen in a room that measures 11.0 ft x 11.0 ft and has a 8.00 ft ceiling. The number of liters of nitrogen that were used to fill the room is : (D) 2.74 x 104  Liters.

The number of liters of nitrogen that were used to fill the room

= Volume of room in cm3 x 1 Liters / 103 cm3

Volume of room in cm3 = 11.0 ft x  (30.48 cm / 1 ft) x  11.0 ft x  (30.48 cm / 1 ft) x 8.00 ft x (30.48 cm / 1 ft)

= 27410707.501 cm3  or 2.741 x 107 cm3

And since  1 Litres = 103 cm3

Volume of room in cm3  = 2.74 x 107 cm3

Now putting these values in the above equation we get

So, the number of liters of nitrogen that were used to fill the room

= Volume of room in cm3 x 1 Liters / 103 cm3

= 2.74 x 107 cm3  x 1 Liters / 103 cm3

= 2.741 x 104  Liters

Thus, an inert atmosphere was obtained by adding nitrogen in a room that measures 11.0 ft x 11.0 ft and has a 8.00 ft ceiling. The number of liters of nitrogen that were used to fill the room is 2.74 x 104  Liters.

The conference room of a hotel measures 40 ft by 50 ft has a 12-foot ceiling what is the area of the walls​

The area of the walls is 2 ,160 ft ²

we know that,

The area of the walls is =  perimeter of the conference room *   the height of the ceiling

So,

A = 2 (40 + 50 ) (12)

A = 2 , 160ft²

To know more about ceiling ,  visit ;

https://brainly.com/question/12715229

#SPJ4

Neurons have a net negative charge at rest. This means that when they are active, they must have a positive charge. True or false?.

Answers

The statement is True.  

Neurons have a net negative charge when it is at rest. This means that when they are well active, they must have a positive charge.

At rest, neurons have a net negative charge; the inside of neurons is approximately 70 millivolts more negative than the outside. When neurons are active, they must be positively charged in order to generate an action potential.

Neurons have a strong negative charge within them, as opposed to a positive charge outside. This is due to the presence of other molecules known as anions. They are negatively charged but far too large to escape through any available channel. They remain in place and give the cell a negative charge on the inside.

Because of an unequal distribution of positive ions across the membrane, the resting potential is negative; 3 Na+ is pumped out of the cell for every 2 K+ that enters, so the inside of the cell is less negative (less positive) than its surroundings.

Learn to know more about the types of neurons on

https://brainly.com/question/13061744

#SPJ4

The drift velocity should be in the same direction as the applied force.
a. true
b. false

Answers

It is a false statement i.e. drift velocity is not same in the direction as the applied force.

Drift velocity of a  current-carrying conductor can be explained as, the charges i.e. electrons do not  flow in the same direction of current. In other word, in most cases the movement of the electrons is almost random, with a small net velocity. So that , the drift velocity, in the direction opposite to the electric field.

Drift velocity [tex]v_{d}[/tex] is inversely proportional to the number of electron per unit volume of the conductor e. Therefore, the formulation can be given as ,

[tex]v_{d}[/tex] = σ E/ne

The above equation shows the drift velocity in a current carrying conductor  

where, [tex]v_{d}[/tex] is drift velocity , σ is the conductivity, E is electric force and n is number of electrons per unit volume of the conductor e.

Hence here we can say that, the drift velocity is not in the same direction as the applied force.

To know more about drift velocity

https://brainly.com/question/17167604

#SPJ4

Other Questions
The quarterback threw the football is a what? The temperature at which a parcel of air becomes saturated and condensation begins is called the? A number is chosen at random from 1 to 10. Find the probability of selecting number 4 or smaller numbers Lcm and gcf of 40 and 48 (need a solution) Inverse market demand is: p = 1,000 - (q1 q2). costs for each firm are identical and given by: ciqi = 4qi determine the profit function for a cournot oligopolist. (write each as an algebratic expression) a cubed is equal to 31 Which tax is assessed to provide monthly retirement, survivor, and disability benefits for qualifying individuals? What percentage of the total number of u.s adults did the harris poll sample for uts survey? If an atom has 14 protons, 11 neutrons, and 17 electrons, what is the atom's electrical charge? These numbers form an addition and subtraction fact family.4, 2, 6Choose the fact family formed by these numbers.OA 2+6=88-6=22+2=44-2=2OB. 2+4= 66-4=2OC 4+2=66-2=4OD. 4+2=66-2=42+4=66-4=2 If you want to run cabling in the space between a false ceiling and the true ceiling, you must use ________-rated cable. I need help with #25 PLEASEEEE!!I DONT UNDERSTAND The globe framework uses some of the same dimensions as the hofstede cultural values inventory, but added others. one additional dimension in the globe that is not in the hofstede values is:________ Four point charges lie on the vertices of a square with side length L. Two adjacent vertices have charge Q, while the other two have charge -Q. What is the magnitude of the electric field at the center of the square? There is more traffic between 8 and 9 in the morning because most people start work at 9. this would be a(n) ________. If you are found with an open container of alcohol in your vehicle on a public highway, you have violated ____. How does the commander justify/rationalize the current predicament of handmaids? what does it reveal about the true intentions of gilead? How much money will it cost to drive a school bus 94.00 miles if it gets 6.500 miles per gallon and gas costs $2.459/gallon? Represent the following sentence as an algebraic expression, where "a number" is theletter x. You do not need to simplify.The product of 3 and the difference of 5 and a number. Exercise 2 Complete each sentence by writing a verb phrase (main verb and auxiliary verbs) using the verb indicated. After building a good record, she ___________was offered an opportunity to qualify for the Indianapolis 500. (offer)