The graphs for the radial probability functions r2r2(r) of the atomic orbitals can be made using the information provided below.
The radial probability function (rR2(r)) represents the probability of finding an electron in an orbital at a certain distance from the nucleus. The radial probability function can be used to visualize the size and shape of atomic orbitals. The values of the radial probability function are proportional to the square of the radial wave function.
For s-orbitals (1s, 2s, 3s, 4s), the radial probability functions are spherically symmetrical and centered on the nucleus. They decrease rapidly with increasing distance from the nucleus, reaching zero at a certain distance. The 1s orbital is the smallest and has the highest probability of finding an electron close to the nucleus. The 2s orbital is larger than the 1s orbital and has a lower probability of finding an electron close to the nucleus. Similarly, the 3s and 4s orbitals are larger and have lower probabilities of finding an electron close to the nucleus.
For p-orbitals (3p), the radial probability functions are not spherically symmetrical and have a nodal plane where the probability of finding an electron is zero. They have a maximum probability at a certain distance from the nucleus and decrease rapidly with increasing distance from the nucleus.
For d-orbitals (3d), the radial probability functions have more complex shapes with several nodal planes where the probability of finding an electron is zero. They have maxima and minima at different distances from the nucleus.
For f-orbitals (4f), the radial probability functions have even more complex shapes with multiple nodal planes and regions of maximum and minimum probability. The 4f orbitals are larger and have a lower probability of finding an electron close to the nucleus compared to the 3d orbitals.
The inclusion of relativistic effects in the calculations of the radial probability functions can result in differences in the shapes of the functions for s and f orbitals. However, the inclusion of relativistic effects does not significantly affect the shapes of the p and d orbitals.
Learn more about atomic orbitals here:
https://brainly.com/question/28240666
#SPJ4
The complete question is:
Draw the radial probability functions rR2(r) of the following atomic orbitals Be sure to indicate which curve corresponds to which orbital and label your axes 1s, 2$, & 3s on the same graph b_ 3s, 3p, & 3d on the same graph 4s without relativistic effects and 4s with relativistic effects, on the same graph d. 4f without relativistic effects and 4f with relativistic effects, on the same graph.
Upon solvation, energy is always: Select the correct answer below: O absorbed O released O constant O depends on the solution
Upon solvation, energy is always released. Correct answer: letter B.
This is because the energy required to break the bonds between the solvent molecules and the solute molecules is greater than the energy released when the solute molecules form new bonds with the solvent molecules.
The amount of energy released or absorbed during solvation is dependent on the type of solute and solvent, and the concentration of the solution.
In addition to the energy released or absorbed during solvation, the process also affects the thermodynamic properties of the solution. Generally, the entropy of a solution increases upon solvation due to the increased number of molecules and the increased number of possible states.
This leads to a decrease in the solution's temperature, as energy is released in the form of heat.
Learn more about energy:
https://brainly.com/question/29348171
#SPJ4
identify the best conditions for reaction b. cat. h , naoch3 , dmso cat. h , naoch3 , ch3oh naoch3 , dmso ch3oh , heat naoch3 , ch3oh
Explanation:
The best conditions for reaction b are naoch3, ch3oh, and heat.
in which of the following situations is angular momentum approximately conserved in a system? (hint: recall what conditions are necessary for translational momentum to be conserved.)
According to the law of conservation of angular momentum, when no net torque is applied to a system, which in this case refers to the rotating object or objects, angular momentum is conserved.
What is angular momentum?The rotational equivalent of linear momentum in physics is called angular momentum, also known as moment of momentum or rotational momentum.
It is a conserved quantity, meaning that the total angular momentum of a closed system stays constant, making it a significant physical quantity. Both the direction and the amplitude of angular momentum are conserved. The functional characteristics of bicycles and motorbikes, frisbees, rifled bullets, and gyroscopes are due to the conservation of angular momentum.
Learn more about angular momentum here https://brainly.com/question/4126751
#SPJ1
based on the given ir spectrum and mass spectrum of an unknown compound what is a possible structure for the unknown comound
Based on the given IR spectrum and mass spectrum of an unknown compound, the possible structure could be an organic compound with a molecular formula of C5H10.
This could be a straight-chain alkane with five carbon atoms and ten hydrogen atoms, such as pentane. The IR spectrum could show absorption bands corresponding to C-H and C-C stretching vibrations, and the mass spectrum could show a peak corresponding to the molecular ion at m/z 72.
This suggests that the compound is likely a straight-chain alkane, such as pentane. To confirm the structure, further analysis of the IR and mass spectra can be done to compare the values to those of known compounds.
Learn more about mass spectrum
https://brainly.com/question/17368088
#SPJ4
chemists commonly use a rule of thumb that an increase of 10 k in temperature doubles the rate of a reaction. what must the activation energy be for this statement to be true for a temperature increa
The activation energy in this scenario must be 52.4 kJ/mol, according to the Arrhenius equation.
Only at a certain temperature for a given activation energy does the general rule that the rate of reaction doubles for a 10° C increase in temperature apply. Establish a connection between the temperature and activation energy at which the rule is valid. Ignore any concentration-related temperature variations. A general rule of thumb in organic chemistry states that a reaction's pace doubles every 10C increase in temperature from room temperature. As a general rule, many reactions have reaction rates that double every ten degrees Celsius of temperature rise. For a given reaction, the ratio of its rate constant at a higher temperature to its rate constant at a lower temperature is known as its temperature coefficient, (Q).
Learn more about activation energy Here :
https://brainly.com/question/28384644
#SPJ4
What mass of solid FeCl3 is formed when 200 mL of 0.375 N Fe3+ is mixed with 400 mL of 0.175 N Cl2?
Please anwer
Answer:
4.05 g
Explanation:
The balanced chemical equation for the reaction between Fe3+ and Cl2 is:
Fe3+ + 3 Cl2 -> FeCl3
To find the amount of FeCl3 formed, we need to find the limiting reactant and then calculate the amount of product that can be formed.
First, we calculate the number of moles of Fe3+ and Cl2:
Fe3+: 0.375 N * 200 mL = 0.075 mol
Cl2: 0.175 N * 400 mL = 0.07 mol
Since Fe3+ is the limiting reactant, we can use its moles to determine the amount of FeCl3 that can be formed:
0.075 mol Fe3+ * (1 mol FeCl3 / 3 mol Cl2) = 0.025 mol FeCl3
Finally, to find the mass of FeCl3, we use its molar mass:
0.025 mol FeCl3 * 162.2 g/mol = 4.05 g FeCl3.
So, 4.05 g of FeCl3 is formed when 200 mL of 0.375 N Fe3+ is mixed with 400 mL of 0.175 N Cl2.
8.50 of a certain Compound X, known to be made of carbon, hydrogen and perhaps oxygen, and to have a molecular molar mass of 160./gmol, is burned completely in excess oxygen, and the mass of the products carefully measured: product mass carbon dioxide 14.03g water 3.83g
The compound would have a molecular formula of C5H10O2.
What is the empirical formula of the compound?
The empirical formulas is the simplest formula of a compound.
We know that;
Mass of the carbon = 14.03 * 12/44 = 3.82 g
Moles of C = 3.82 g/12 g/mol = 0.32 moles
Mass of water = 3.83 * 2/18 = 0.43 g
Moles of H = 0.43 g/1 g/mol = 0.43 moles
Mass of oxygen = 8.5 - (3.82 + 0.43)
= 4.25 g
Moles of oxygen = 4.25 g/16 g/mol = 0.27 moles
We can now divide through by the lowest ratio;
C - 0.32 H - 0.43 O - 0.27
C - 1 H - 2 O - 1
The empirical formula is CH2O
The molecular formula is;
[12 + 2+ 16]n = 160
n = 160/30
n = 5
The molecular formula is;
C5H10O2
Learn more about molecular formula :https://brainly.com/question/20748250
#SPJ1
Compound A has the molecular formula C14H25Br and was obtained by the reaction of sodium acetylide with 1,12-dibromododecane. On treatment of compound A with sodium amide, compound B (C14H24) was obtained. Ozonolysis of compound B gave the diacid HO2C(CH2)12CO2H. Catalytic hydrogenation of compound B over Lindlar palladium gave compound C (C14H26), and hydrogenation over platinum gave compound D (C14H28). Further, C yielded O=CH(CH2)12CH=O on ozonolysis. Assign structures to compounds A through D so as to be consistent with the observed transformations.
The structures of the compounnds A and D are shown in the image attached.
What is ozonolysis?
Ozonolysis is a chemical reaction in which ozone (O3) is used to cleave carbon-carbon double bonds in organic compounds. The reaction typically results in the formation of carbonyl compounds (such as aldehydes or ketones) and the cleavage of the original molecule into two smaller fragments.
Ozonolysis is often used in organic synthesis as a tool for the functional group analysis of complex molecules. The reaction mechanism involves the attack of ozone on the double bond, followed by the formation of a highly reactive intermediate, which undergoes further reactions to produce the final products.
Learn more about ozonolysis:https://brainly.com/question/30325381
#SPJ1
Measure the height of the column of gas in the tube. (Click the ruler and capillary tube.)
The temperature of the columns is 40 degrees. From the image that has been attached to the answer.
How do we measure the temperature?We know that in the case of this set up that we would have to read the set up and the position of the lines and the point where we can see the end of the thread of the mercury line of the thermometer.
The thermometer can be defined as device that can be used in the measurement of temperature and in this case, we are having the temperature of the set up that is shown in the image that is attached.
Learn more about measurement:https://brainly.com/question/4725561
#SPJ1
Question Which statement best describes the relationship between changes in air pressure and wind speeds? Responses When a high- and a low-pressure air mass are far apart, air moves quickly from high to low pressure. When a high- and a low-pressure air mass are far apart, air moves quickly from high to low pressure. When a high- and a low-pressure air mass are far apart, air moves quickly from low to high pressure. When a high- and a low-pressure air mass are far apart, air moves quickly from low to high pressure. When a high- and a low-pressure air mass are far apart, air moves slowly from high to low pressure. When a high- and a low-pressure air mass are far apart, air moves slowly from high to low pressure. When a high- and a low-pressure air mass are close together, air moves slowly from high to low pressure.
The statement which best describes the air pressure and wind speed is option c is correct. When a high- and a low-pressure air mass are far apart, air moves slowly from high to low pressure.
What are winds?Winds are passage of air from high pressure area to low pressure area. Air masses may travel from one place to another as a result of variations in air pressure. Air masses often move from high-pressure regions to low-pressure regions.
Winds therefore sweep away from high-pressure zones and toward low-pressure ones. The winds can moves the air masses in the atmosphere and the air masses collide in the clod and humid air.
Winds transfer meteorological conditions from the source location to the destination zone as they move air masses. The air mass may collide with another air mass that has a different temperature and humidity as it enters a new area. This may bring about a powerful storm.
Find more on winds:
brainly.com/question/12089291
#SPJ1
When a solution is saturated and additional solute sits at the bottom of the vessel: Select the correct answer below: Some solute will precipitate but no more will dissolve, so the concentration will fall. More solute will dissolve, but no more will precipitate, so the concentration will rise, The solute will continue to dissolve and precipitate at precisely the same rate so that the concentration will remain fixed There is no activity involving the solute, so the concentration will remain fixed
A solution will get more concentrated when it reaches saturation and more solute settles at the bottom of the container.
When a small amount of solute is introduced to a saturated solution, it does not dissolve. The solute is not altered in the solution. At some time, the solution reaches a point of saturation. Therefore, if you add more of the chemical, it won't continue to dissolve and will remain solid. The quantity relies on the molecular interactions between the solvent and the solute. A solution that contains more solute than the saturated solution at a specific temperature is referred to as a super saturated solution. Solute concentration in a supersaturated solution is higher than what would normally dissolve at a given temperature.
Learn more about saturated solution from here:
https://brainly.com/question/1851822
#SPJ4
The positively charged particles found in atoms are called ?
Answer:
Two of the subatomic particles have electrical charges: protons have a positive charge while electrons have a negative charge. Neutrons, on the other hand, don't have a charge.
Explanation:
hope this helps you
what is the pH of a solution that contains 0.0425 moles of HCl in 6.50 litres of water?
Answer:
To find the pH of a solution that contains a strong acid like HCl, you can use the equation:
pH = -log[H+]
Where [H+] is the concentration of hydrogen ions in moles per liter. In this case, you know the concentration of HCl and the volume of water, so you can calculate the concentration of hydrogen ions by using the equation:
[H+] = (0.0425 moles HCl) / (6.50 liters water) = 0.0653846 moles/liter
Finally, you can calculate the pH:
pH = -log[0.0653846 moles/liter] = 1.18
So the pH of the solution is 1.18.
Explanation:
Do you want to know shot trick also?
a carbonyl is bonded to cyclopentane and o minus. this reacts with lithium aluminum hydride followed by an aqueous workup to give the product. t/f
The Statement is True. A carbonyl is bonded to cyclopentane and o minus. This reacts with lithium aluminum hydride followed by means of an aqueous workup to provide the product.
A Chemical reaction is a gadget that occurs whilst two or more molecules engage to form a logo-new product(s). Compounds that interact to produce new compounds are referred to as reactants while the newly fashioned compounds are referred to as products.
The techniques, wherein a substance or substances go through a chemical change to offer new substance or substances, with completely new houses, are referred to as chemical reactions. A chemical reaction is a technique that affects the chemical transformation of 1 set of chemical substances to every other. A chemical response happens when one or greater compounds, called reactants, are changed into one or more splendid materials, known as merchandise. substances are either chemical additives or compounds.
To learn more about Reaction visit here:
brainly.com/question/30115256
#SPJ4
Caffeine (C8H10N4O2) is a stimulant found in coffee and tea. A solution of caffeine in the solvent chloroform (CHCl3) has a concentration of 0.0520 m.
Part A:
Calculate the percentage of caffeine by mass in the solution.
Part B:
Calculate the mole fraction of caffeine in the solution.
Taking into account molality, percentage by mass, and mole fraction. The solution's proportion by mass is 0.952%. The solution contains 0.00587 moles of caffeine.
Is the stimulant present in coffee and tea called caffeine?The chemical caffeine stimulates (increases activity in) the brain and nervous system. Coffee, tea, soft drinks, and energy drinks are just a few beverages that contain caffeine. Caffeine can be found in chocolate. Oftentimes, energy drinks have more sugar and caffeine than soft beverages.
% by mass is equal to (mass of solute/mass of solution) * 100.
Regarding this:
caffeine, whose molar mass is 194.22g/mol, has a mass of 0.0490 moles (194.22g/mol) per 1 kilogramme of solution, or 0.00952 kg.
Then, the percentage by mass is calculated as:
Percentage by mass = (0.00952kg/ 1kg)*100
Solving:
Percentage by mass= 0.952%
The percentage by mass of the solution is 0.952%.
To know more about molality visit :-
https://brainly.com/question/29808886
#SPJ4
Auroras are lights that appear at Earth’s northern and southern poles. What is the main cause of an aurora?
A.
Solar wind enters Earth’s atmosphere, and particles interact with ions.
B.
Bubbles of gas are ejected from Earth’s outer crust.
C.
Sunlight reflects off the surface of the Moon during an eclipse.
D.
The northern and southern poles are cooler than the rest of Earth.
Answer:
What is the main cause of an aurora?
The short answer to how the aurora happens is that energetic electrically charged particles (mostly electrons) accelerate along the magnetic field lines into the upper atmosphere, where they collide with gas atoms, causing the atoms to give off light.
Explanation:
Question number 4 and 5
Based on the given data:
the experimental percentage water in the hydrate is 22.0%the percentage error is 38.3%What is the percentage water in the hydrate?Mass of the hydrated salt = mass of evaporating dish + sample before heating - mass of evaporating dish
Mass of hydrated salt = 22.611 - 20.316
Mass of hydrated salt = 2.295 g
Mass of anhydrous salt = mass of evaporating dish + sample before heating - mass of evaporating dish + sample after 3rd heating
Mass of anhydrous salt = 22.611 - 22.106
Mass of anhydrous salt = 0.505 g
Experimental percentage water in the hydrate = 0.505/2.295 * 100%
Experimental percentage water in the hydrate = 22.0%
Percentage error = |True value - calculated value| / True value * 100%
Percentage error = |35.67 - 22.00|/35.67 * 100%
Percentage error = 38.3%
Learn more about the percentage water in hydrate at: https://brainly.com/question/16812791
#SPJ1
The apparatus shown below can be used to investigate the electrolysis of brine. What chemical
present in the sodium chloride solution provides the hydrogen that's collecting at the cathode?
The chemical present in the sodium chloride solution provides the hydrogen that's collecting at the cathode is water.
What is cathode ?In a polarized electrical device, the cathode is the metallic electrode through which current flows. An anode, on the other hand, is the electrode in a polarized electrical device through which current flows in from an external circuit.
NaCl is the formula for sodium chloride. So, The hydrogen had to be derived from the water in which the NaCl was dissolved. H2O is the formula for water.
Thus, The chemical present in the sodium chloride solution provides the hydrogen that's collecting at the cathode is water.
To learn more about the cathode, follow the link;
https://brainly.com/question/11920555
#SPJ1
: Balance the following equations:
Nal +
F₂ —>
NaF +
+
I₂
The balanced equation of the given reaction is given below:
2 NaI + F₂ -----> 2 NaF + I₂What is a balanced equation of a chemical reaction?An equation for a chemical reaction is said to be balanced if both the reactants and the products have the same total charge and the same number of atoms for each component in the reaction. In other words, both sides of the reaction have an equal balance of mass and charge.
Numerical coefficients are placed in the front of the formula of the compound and elements until the mole of atoms is balanced on both sides of the equation.
The balanced equation of the given reaction is obtained by placing 2 in front of NaI and NaF.
Learn more about balanced chemical equations at: https://brainly.com/question/26694427
#SPJ1
Identify which of these molecules has the highest boiling point and give the reasoning why in terms of intermolecular force. CHCl3, H2O, CO2
According to the forces of attraction, water has highest boiling point as it possesses hydrogen bonding.
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/23841038
#SPJ1
which statement(s) is/are true regarding chemical equilibria? select all that apply. g the rate constants for the forward and reverse reactions are equal when a chemical reaction is at equilibrium. the concentrations of reactants and products are constant at equilibrium.
Chemical reactions don't stop when they reach equilibrium.Both the forward and backwards reflexes often happen at the same rate.
What claims about chemical equilibrium are true?Authentic claims on chemical equilibrium:Reactant and product concentrations are both constant.Reactant and product concentrations are both constant.If there is no increase inside the concentration of the reactants or products, equilibrium has been reached.
Which of the following is accurate for every equilibrium system?The forward reaction rate is the same as the reverse reaction rate.Ah, so that's the claim.That's accurate.The forward and backward reactions happen at the same rate in an equilibrium, which is true.
To know more about Chemical reactions visit:
https://brainly.com/question/12276877
#SPJ4
f a simple distillation were to be performed on this mixture( from question 1 ), what would be the composition of the initial distillate?
By applying the formula y = ( * x) / 1 + ( -1) * x, where "" denotes relative volatility, "x" denotes the mole fraction of the substance in the liquid, and "y" is the mole fraction of the substance distillation in the vapour, you may determine the mole fraction of a chemical in a vapour.
What exactly is the simple distillation mixture?
Definition: A technique for separating mixes in a boiling liquid combination based on differences in their volatilities. After applying heat to a sample mixture, the components are instantly cooled by the action of cold water in a condenser.
In distillation Mcq, what exactly is the distillate?
In distillation, what exactly is the distillate? Explanation: The vapour in a distillation column that is collected, condensed into a liquid, and collected in the collecting flask is referred to as a distillate in the distillation process.
To know more about distillation visit:
brainly.com/question/29037176
#SPJ4
an proton in an electron rich environment will experience a (smaller/larger) blank1 - word answer please type your answer to submit magnetic field compared to the magnetic field applied to the sample by the instrument. this results in the chemical shift of the proton being shifted (upfield/downfield) blank2 - word answer compared a proton that experiences a magnetic field equal to the applied magnetic field.
A proton will encounter a reduced magnetic field in an environment where there are many electrons, which causes the proton's chemical shift to go downfield.
What causes a proton to move downward?
Electronegative substances that are also linked to carbon shift the resonance position of protons down field. By removing electron density from carbon and its directly bound protons, the electronegative element reduces the Be field's strength.
What causes proton peak downfield shifts?
The chemical shift shifts downfield (higher ppms) because the proton experiences a greater external magnetic field and hence requires a higher frequency to establish resonance.
To know more about proton visit:
brainly.com/question/1252435
#SPJ4
identify the net ionic equation for the reaction that occurs when solutions of agno3 and nh4cl are mixed.
ensuring that salespeople know the ethical and legal framework for their markets, including cultural and global market variations, is a salesforce response to which of the following issues?
A salesforce solution to accountability concerns is to ensure that salespeople are aware of the ethical and regulatory framework for their markets, including cultural and worldwide market variances.
Which of the following communication tactics does not entail face-to-face interaction between sales managers and salespeople?Sales managers have the right to discipline salesmen. As a result, they are often able to sway salespeople without resorting to coercion, threats, or promises.
Which of the following responsibilities for sales managers is the most crucial?One of a sales manager's most crucial responsibilities is inspiring the team. He needs to organise his team so that they work together as a single unit to achieve a common goal. He is responsible for making sure the team members get along well and don't fight.
To learn more about salesforce visit:
brainly.com/question/30002077
#SPJ4
Which of the following actions is the first priority of care for a client exhibiting signs and symptoms of coronary artery disease?
A Decrease anxiety
B Enhance myocardial oxygenation
C Administer sublingual nitroglycerin
D Educate the client about his symptoms
The first focus of care for just a client displaying symptoms and signs of coronary heart disease is the activity listed below. B improve the oxygenation of the heart.
Which of the following procedures should be the first priority when treating a client who has coronary artery disease symptoms and signs?The first goal of care is giving the client additional oxygen. In order to help with oxygenation and stop further damage, more oxygen is given because an infarction deprives the myocardium of oxygen.
What medical intervention is the primary and most critical for myocardial infarction?Surgery to sever the coronary arteries. It's open heart surgery here. To construct a new pathway for blood through the heart, a surgeon pulls a healthy blood artery from another section of the body. then the blood travels around the coronary artery that is obstructed or narrowed. When a person is having a heart attack, CABG may be performed as an urgent procedure.
To know more about heart disease visit:
https://brainly.com/question/14950729
#SPJ4
if the initial pressure is 0.20 atm and the dinoitrogen pentaoxide decomposes completely. what is the final pressure?
The final pressure would depend on the number of moles of nitrogen dioxide and the volume of the container it is in, as well as any other gases that may be present. The final pressure nitrogen dioxide is 20 atm.
About Nitrogen DioxideNitrogen dioxide is a chemical compound with the formula NO₂. One of several nitrogen oxides, NO₂ is used as a synthetic material for the manufacture of nitric acid, which produces millions of tonnes annually. Nitrogen dioxide (NO 2 ) is a major contributor to smog formation and a precursor to many harmful secondary pollutants, including ozone and particulate matter. It is highly reactive with other chemicals and is a strong oxidizing agent. Nitrogen dioxide is a dark red-orange gas.
Learn More About Nitrogen Dioxide at brainly.com/question/30459594
#SPJ4
f dry solute is heated, which of the following can occur? group of answer choices it will turn into an oil it will expand it may become damaged it will evaporate
Higher temperatures result in an increase in kinetic energy, which allows the solvent molecules to more efficiently damage the intermolecularly attracted solute molecules.
Solubility of the solute in the solution is increased by heating saturated solution. Because the particles gain kinetic energy as the temperature rises, they move faster, increasing the likelihood of collisions and diffusion. By giving energy to break bonds in the material, more heat is added, which speeds up the dissolving reaction. This is the most typical instance in which a rise in temperature results in a rise in the solubility of solids.
Learn more about kinetic energy from here:
https://brainly.com/question/26472013
#SPJ4
a solid aluminum sphere has a mass of 37 g . use the density of aluminum to find the radius of the sphere in inches.
The radius of the sphere is 1.484 cm or 0.58 inches.
The density of aluminum is 2.7 g//cm³. To calculate the radius of the sphere, we can use the formula of density first:
Density = mass/volume
Given that the mass is 37 grams,
2.7 = 37 / V
2.7V = 37
V = 13.7 cm³
The formula for the volume of sphere is V = 4/3 π r³
Plug the numbers:
13.7 = 4/3 * π * r³
13.7 = 4/3 * 22/7 * r³
r³ = 3.269
r = 1.484 cm.
Convert that to inches (1 inch = 2.54 cm) = 0.58 inches.
Learn more about density at https://brainly.com/question/1354972
#SPJ4
A system has reached chemical equilibrium: Which is true of the system? -there is no net. change in the concentration of reactants or products -the molecules have stopped combining and decomposing -the system is open there is no change taking place-All of the above are true
Neither the reactant nor product concentrations change overall. -The molecules are no longer fusing together or breaking down.
The amount of solute (the material being dissolved) per unit volume of solvent is known as the concentration of a substance in a solution (the substance in which the solute is dissolved). Using measures like molarity, molality, and mole fraction, concentration is a measurement of the amount of solute in a solution.The rate of a reaction and the final result of a chemical reaction can both be significantly impacted by variations in the concentration of the reactants and products. Understanding concentration is crucial for comprehending how solutions behave and how chemical reactions turn out. Additionally, adjustments to concentration can be made to regulate the rate of reactions, for as by varying the quantity of reactants added.
Learn more about concentration here:
https://brainly.com/question/10720472
#SPJ4