Determine the half-life of a nuclide that loses 38.0% of its mass in 407 hours. 590 hours 281 hours 291 hours 568 hour 204 hours

(a) Duration of the ball's flight is 2.5S

(b) Angle of its velocity is 16.1

(c) Speed of the ball is 22.53 m/s

(a). To determine the duration of the ball's flight in

We calculate the whole time when the ball touches the ground, thus we enter y=0 and all other specified values in the equation.

[tex]25sin30t-1/210t^{2} = 0[/tex]

[tex]t = 2.5 s[/tex]

(b) After it has been in the air for one-fourth of this period, determine the angle of its velocity with respect to the ground.

t1=1/4 t = 2.5/4 = 0.625 s

[tex]v_{x} = 25\sqrt{3} /2 m/s[/tex]

[tex]v_{y} = 25/2 - 2.5/2 = 12.5/2 m/s[/tex]

∅= 16.1

(c) To determine speed of the ball for time [tex]t_{1} ,t_{2} , t_{3}[/tex]

[tex]v=\sqrt{v} ^{2}{x} + \sqrt{v} ^{2} y_{}[/tex]

vt1 = 22.53 m/s

vt2 = 21.65 m/s

vt3 = 22.53 m/s

The turning point on the corresponding parabolic curve is where the speed is at its lowest in the xx direction. Physically speaking, the shift in speed does make sense. The ball's initial motion against gravity causes its speed to decrease, but after it reaches the turning point, its speed begins to increase as it descends.

To learn more about parabolic arc, visit:

https://brainly.com/question/14003217

#SPJ4

​

The charge that has passed through the element the first millisecond is 2.3nc.

Millisecond is a period estimation unit with the image of MS, which is equivalent to a one thousandth of a second. It can likewise be characterized as the span of photograph electric lamp, or as the hour of a cycle for 1kHz recurrence. This unit is at times utilized while estimating extent or making truly exact physical and logical computations. Millisecond is clearly utilized rigorously for logical purposes since estimating this unit of time is very troublesome. This web-based milliseconds to microseconds converter can be exceptionally helpful for understudies, analysts, science fans and the people who are needing making time changes.

Learn more about millisecond, refer:

https://brainly.com/question/21081246

#SPJ4

In parabolic solar cooker, the container of cooking is placed at the focal point of mirror of parabolic shape so that all rays that are falling on solar cooker can converge to one point and produce large amount of heat energy.

A parabolic solar cooker is a cooking device that works on the energy generated from solar panel.

Though solar cookers are slow to cook, they are green sources of energy utilizer as well as renewable source of energy.

Parabolic solar cookers make the use of a reflector which is parabolic in shape to concentrate sunlight into a smaller area in order to generate heat for cooking. They are able to reach high temperatures, which allows them to be used for grilling and frying. These temperatures are significantly higher than what can be reached by a solar box cookers or solar panel cookers .

#SPJ9

The correct option is type ii supernovae.

Neutron stars and black holes are formed by type II supernovae.

Learn more about the Type I and II supernova with the help of the given link:

https://brainly.com/question/3521333

#SPJ4

Answer:

ρ = M / V               ρ = density

M = ρ * V = 132.5 cm^3 * .01932 kg / cm^3 = 2.561 kg

Note: Water has a density of 1000 kg / m^3 = 1E-3 kg / cm^3

So the equivalent weight of water would be

1.0E-3 kg/cm^3 * 132.5 cm^3 = .132 kg        for the water

The specific gravity of the Au is 2.561 / .132 = 19.4 (correct)

Managers do the crucial duty of controlling when they create precise measuring and monitoring methods to assess how well the firm has achieved its goals.

Software that assists system administrators in monitoring their infrastructure is known as a monitoring system. These tools keep an eye on the hardware, software, and traffic of the system and raise the alarm in the event of errors or disturbances. There are several monitoring systems available, ranging from commercial software to freeware.

The monitoring system broadcasts a signal and logs information about the signal, including whether it was received, how long it took the host to receive it, whether any signal data was lost, and other details.

To learn more about the monitoring systems, visit: https://brainly.com/question/24270833

#SPJ4

Explanation:

In the core of the Sun hydrogen is being converted into helium. This is called nuclear fusion.

It takes four hydrogen atoms to fuse into helium atom. During the process some of the mass is converted into energy.

A nuclear reaction combining nuclei of lighter atoms together to form heavier nuclei resulting in the release of tremendous amount of energy is called a nuclear fusion reaction.

Nuclear fusion reaction takes place in the sun.

Answer:

In the core of the Sun hydrogen is being converted into helium. This is called nuclear fusion. It takes four hydrogen atoms to fuse into each helium atom. During the process some of the mass is converted into energy.

There are 2501.3m³ in 88,263 ft³ the Olympic swimming pool.

Along with arithmetic, geometry is one of the oldest subfields of mathematics. It is concerned with spatial characteristics like the separation between objects, their shape and size, and their relative positions. Geometer is the term used to describe a mathematician who specializes in geometry.

The area of mathematics known as geometry is concerned with the characteristics of the surrounding environment as well as the shapes of particular objects and their spatial relationships.

swimming pool is approximately 88,263 ft³

assume there are 3.28 ft in 1 meter.

Now ,

Given that :

3.28ft = 1m

1 ft = 1/(3.28)m

So,

1 ft = (1/3.28)³m³

88,263 ft³ = 88263/(3.28)³

                = 2501.3m³

There are 2501.3m³ in the Olympic swimming pool.

To know more about geometry visit:

https://brainly.com/question/1578538

#SPJ4

Answer:

D) diatomic

Explanation:

Diatomic elements form molecules with two atoms together.

Hope It Helps

Sorry If I'm Wrong

If the ore is tossed overboard, then the water level in the lock will remain the same.

In the above situation, Archimedes’ Principle is used.

It was given by a Greek Scientist, Archimedes in 246 CE.

According to this principle, the upward buoyant force on a body that is exerted on a body immersed in a liquid is equal to the weight of the liquid displaced by the body.

The formula for Buoyant force is given by the following formula

Force = ρ x g x v

Here  ρ = density of the fluid

g = acceleration due to gravity

v = Volume of the fluid

Thus, When the ore is tossed overboard, then it displaces water equal to its weight, so the water level remains the same.

To know more about the "Archimedes Principle", refer to the link given below:

https://brainly.com/question/787619?referrer=searchResults

#SPJ4

Yes, The velocity of a ball is 1 m/s at a given instant of time. it is possible for the acceleration of the ball to be -1 at this instant.

If it is made sure that the other values are plugged in correctly, a positive velocity is capable of making a negative acceleration.

A moving item always experiences positive acceleration. An object that is slowing down always experiences negative acceleration. However it does not mean that negative acceleration always mean reduction in speed.

Deceleration always slows down motion. However, negative acceleration is just acceleration in the opposite direction according to the selected coordinate system. Negative acceleration might or might not be deceleration, and vice versa for negative acceleration.

To know more about acceleration, visit:

https://brainly.com/question/2303856

#SPJ4

The rate of reaction is 75.82k mol / l s

We know that,

Rate = k [tex][a]^{x}[/tex][tex][b]^{y}[/tex]

Where,

k = Rate constant

x = Order of reaction of a

y = Order of reaction of b

Given that,

[a] = 3.94 mol / l

[b] = 2.21 mol / l

x = 2

y = 2

Rate = k * [tex]3.94^{2}[/tex] * [tex]2.21^{2}[/tex]

Rate = 75.82k mol / l s

Rate of reaction is the speed at which the reactants are converted to products.

Therefore, the rate of reaction is 75.82k mol / l s

To know more about rate of reaction

https://brainly.com/question/8592296

#SPJ4

F is continuous on (2,5) and the range is provided as a bounded interval

Although not true for all functions listed [2,5], this is conceivable. For instance, the unbounded range of the function f(x)=x3 is (), which is defined and continuous on the interval [2,5].

When a function is specified at each point along an interval without any gaps, leaps, or interruptions, the interval is said to be continuous for that function.

We say that a function f(x) is continuous on the interval [a, b] if it meets these requirements from x=a to x=b, for instance.

At the right endpoint b, a function is continuous if. The reasons why the endpoints are defined individually.

Because only one way can be used to check for continuity, the endpoints are defined independently. The values will not be in the domain and won’t apply to the function if the limit of an endpoint is checked from a side that is outside the domain.

To know more about continuity of A function visit:

https://brainly.com/question/12990870

#SPJ4

Spacecraft will take around 49 minute and 92 second to coast from perigee to the apogee.

We use Kepler's third law for which the time period is defined as

[tex]T = 2 \pi \sqrt[]{\frac{a^{3} }{GM} }[/tex]

The Prague's altitude is the shortest distance between the earth's surface and satellite.

The average distance of the perigee and  apogee of satellite can be defined as

a = R + [tex]\frac{r_{1} +r_{2} }{2}[/tex]

R is the radius of earth (6374.1km)

r1 is the lower orbit. (500km)

r2 is the higher orbit.(900km)

Using the values in above equation we get:

6374.1+ (500+ 900)/2

a = 7078.1 km

Time taken to fly from perigee to apogee equals to the half of the orbital speed so

t = T/2

[tex]t = \pi \sqrt[]{\frac{a^{3} }{GM} }[/tex]

by using the values we get-

=  √[(7078.1)³/6.67 ×10⁻¹¹ × 6×10²⁴]

= 295573.94 * 10⁻²

= 2995.73s

t = 49 mint 92 sec

It will take around 49 minute and 92 second to coast from perigee to the apogee.

To know more about perigee ang apogee :

https://brainly.com/question/28538480

#SPJ4

If an electron is detached from an atom, the atom is converted to a positive ion called a(n): Cation

Cations are positively charged ions formed when neutral atoms lose electrons. Chemical elements that are cations include:

The atom is the smallest part of the composition of matter, it is indivisible and is composed of a nucleus that has protons and neutrons, and around the nucleus there are the electrons.

Learn more about the atom at: brainly.com/question/17545314

#SPJ4

When selected randomly without replacement the probability that the first 2 selected are white and the last 2 black is 6/91

Given that,

No. of white balls = 6

No. of black balls = 9

Total number of balls = 15

Probability of 1st ball being white = 6/15

Probability of 2st ball being white = 5/14

(Since one white ball is already picked)

Probability of 3rd ball being black = 9/13

(Since two white balls are already picked)

Probability of 4th ball being black = 8/12

(Since two white balls and one black ball is already picked)

The probability that the first 2 selected are white and the last 2 black

= 6/15 * 5/14 * 9/13 * 8/12

= 6/91

Therefore, when selected randomly without replacement the probability that the first 2 selected are white and the last 2 black is 6/91

To know more about Probability

https://brainly.com/question/11234923

#SPJ4

The correct answer for the wavelength (405 or 500 nm) based on our evaluation of the absorption spectrum just taken is 405 nm which is Fluorescence .

Fluorescence diagnosis could improve the safety and reliability of stereotactic brain tumor biopsies performed with biopsy needles equipped with integrated fiber optics. Vital tumor tissue can be localized in vivo during the excision procedure using 5-aminolevulinic-acid-induced protoporphyrin IX (PpIX) fluorescence, reducing the number of samples required for a reliable diagnosis. On optical phantoms, the practical suitability of two different PpIX excitation wavelengths (405 nm, 633 nm) was investigated. Violet excitation at 405 nm provides a 50-fold increase in sensitivity for the bulk tumor; ray tracing simulations show that this factor increases up to 100 with decreasing fluorescent volume.

Learn more about Fluorescence here :-

https://brainly.com/question/24228588

#SPJ4

According to the given statement the height of the object thrown is =20.1m

Initial condition, or initial speed, refers to an object's speed at the start of a measurement. The average speed is the average of the initial and final speeds, or the ratio of the distance travelled to the time required. The speed difference between the initial and final speeds is the change in speed.

Start by dividing the acceleration by the time to determine the beginning velocity. Then, divide that number by 2 and write down the quotient you got. Next, divide the distance by the time and write down that quotient as well. To obtain the beginning velocity, finally remove your first quotient from your second quotient.

The right answer is s= 20.1m

s= -8t+0.5gt^2

t=3

s=20.1 m

To know more about  Initial Speed visit:

https://brainly.com/question/13033040

#SPJ4

The average speed of the dog is  6.8 m/s  while the average velocity is 6.8 m/s halfway to the starting point.

The speed of a moving object is the ratio of the distance covered by the object and the time taken to cover the distance. The average speed is the ratio of the total distance traveled and the total time taken.

Velocity, on the other hand, refers to the speed in a particular direction. In other words, velocity is a vector quantity while speed is a scalar quantity.

In this case:

Total distance covered = 50 + 25

                                       = 75 meters

Total time taken = 7.2 + 3.85

                           = 11.05 seconds

Average speed = 75/11.05

                          = 6.8 m/s

Average velocity = 6.8 m/s halfway

More on speed and velocity can be found here: https://brainly.com/question/5794232

#SPJ1

Weight is the the gravitational force of the total body mass in the gravitational field. We can feel our weight due to the earth's normal reaction to the weight.

Gravitational force is the kind of attractive force between any two bodies is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.

Therefore when we stand at rest on a pair of bathroom scales, the readings on the scales will always reads the same as the actual weight of our body.

To know more about gravitational force,

https://brainly.com/question/5599230

#SPJ4

By using drift velocity of the electron, the current flow is 7.20 ampere.

We need to know about drift velocity of electrons to solve this problem. The drift velocity can be determined as

v = I / (n . A . q)

where v is drift velocity, I is current, n is atom number density, A is surface area and q is the charge.

From the question above, we know that

d = 2.097 mm

r = (0.002097 / 2) m

v = 1.54 mm/s = 0.00154 m/s

ρ = 8.92 x 10³ kg/m³

q = e = 1.6 x 10¯¹⁹C

Find the atom density

n = Na x ρ / Mr

where Na is Avogadro's number (6.022 x 10²³), Mr is the atomic weight of copper (63.5 g/mol = 0.635 kg/mol).

n = 6.022 x 10²³ x 8.92 x 10³ / 0.635

n = 8.46 x 10²⁷ /m³

Find the current flows

v = I / (n . A . q)

0.00154 = I / (8.46 x 10²⁷ . πr² . 1.6 x 10¯¹⁹)

0.00154 = I / (8.46 x 10²⁷ . π(0.002097 / 2)² . 1.6 x 10¯¹⁹)

I = 7.20 ampere

For more on drift velocity at: https://brainly.com/question/25700682

#SPJ4

If a hypothetical planet is twice as far from the sun as the earth, it should have a time period of 1032 days.

In the early 17th century, Johannes Kepler observed planetary motions and researched them to give three laws known as Kepler’s Laws.

These laws are:

(1) Law of orbits

(2) Law of Areas

(3) Law of Periods

According to the third law, the square of the time period of revolution of a planet around the sun is proportional to the cube of the distance between the sun and the planet, represented by the following  formula

T^2 = r^3

Let T1 be the time period of the revolution of Earth and T2 be the time period of the revolution of the hypothetical planet.

Let r1 be the distance between Earth and the sun and r2 be the distance between the hypothetical planet and the sun.

From the above equation

T1^2 = r1^3

T2^2 = r2^3

Dividing the above equations,

(T1/T2)^2 = (r1/r2)^3

We are given that,

r2 = 2 x r1

And T1 = 365 days

So,

(365/T2)^2 = (r1/2r1)^3

Solving the above equation,

T2 comes out to be 1032 days.

Hence, if a hypothetical planet is twice as far from the sun as the earth, it should have a time period of 1032 days.

To know more about "Kepler's Laws", refer to the following link:

brainly.com/question/28192903?referrer=searchResults

#SPJ4

The population after seven days will be p(7) = 5 [tex]$e^{7k} }[/tex].

We have the following function -

p(t) = 5 [tex]$e^{tk} }[/tex]

We have to determine the total population after 7 days.

In general, growth rate is the measurement of how fast something increases in size during a particular period.

According to the question, we have -

p(t) = 5 [tex]$e^{tk} }[/tex]

Now -

for t = 7 -

p(7) = 5 [tex]$e^{7k} }[/tex]

where k is growth rate.

Hence, the population after seven days will be p(7) = 5 [tex]$e^{7k} }[/tex].

To solve more questions on growth rate, visit the link below-

https://brainly.com/question/16793452

#SPJ4

The electric potential at point p is 86.53 KV

We know that,

Electric potential V = kQ / r

where,

k = Coulomb's constant

Q = Point charge

r = Distance

Given that,

r = 24 cm = 0.24m

Q = 2.31 mC = 2.31 * [tex]10^{6}[/tex] C

k = 8.99 * [tex]10^{9}[/tex] N [tex]m^{2}[/tex] / [tex]C^{2}[/tex]

V = ( 8.99 * [tex]10^{9}[/tex] * 2.31 * [tex]10^{6}[/tex] ) / 0.24

V = 86.53 KV

Electric potential is the amount of work energy required to move a unit charge from a reference point to a specific point inside an electric field. It is a scalar quantity.

Therefore, the electric potential at point p is 86.53 KV

To know more about electric potential

https://brainly.com/question/12645463

#SPJ4

Answer:

Thermal

Thermalphenomena.

Sound

Soundphenomena.

Mechanical

Mechanicalphenomena.

Light

Lightphenomena.

1.) When examining technical drawings, conversion of dimensions is crucial knowledge to have. A person with measurement skills may use an object's shape to determine its sides, angles, area, and volume. If he is aware of these factors, he will be able to modify a sketch or design if the need arises.

If someone knows how to convert a measurement to a system that the other person is familiar with, they can do so when working with someone who is unfamiliar with the measuring system.

2.) Units have a crucial role. No meaning is given to numbers without units in scientific computations. For instance, if someone asks a shopkeeper for three rice, the shopkeeper may not grasp what he means, but if he is told that the customer wants three kilograms of rice, the shopkeeper will. Because the value of anything in one system of units may differ from that of the other, you need also be familiar with unit conversion into other systems (Metric, SI). Understanding units in this way can help with numerous issues.

An object or event's attributes are quantified through measurement so that they can be compared to those of other things or occurrences. Therefore, measurement is the process of determining the size or smallness of a physical quantity in relation to a primary reference quantity of a similar kind. The act or system of measuring is referred to as measurement. It can be viewed as a procedure for utilizing numbers to define physical objects. In this post, you can read more about measurement units and conversion.

To learn more about measurement from the given link:

brainly.com/question/2107310

#SPJ9

The energy required to warm one gram of water by one celsius degree is called a specific heat

The specific heat also known as specific heat capacity, is an intensive property specific, and representative of each substance. It is defined as the energy or amount of heat required to raise the temperature of 1 kilogram (kg) of mass by one degree Celsius (°C).  

In the International units system of measurement the specific heat is expressed  in Joules per kilogram per degree Kelvin.

It is the physical magnitude that allows us to know the degree of heat that a body or an environment has. The higher the temperature, the greater the degree of heat.

Learn more about temperature at: brainly.com/question/24746268

#SPJ4

If a sprinter reaches his top speed of 10.9 m/s in 2.84 s , his total time to cover a distance of 100 m is 10.59 sec

We know that,

a = u / t

s = ut + 1/2 a[tex]t^{2}[/tex]

where,

s = Distance

u = Initial velocity

a = Acceleration

t = Time

Given that,

Top speed = 10.9 m / s

Time taken to reach top speed = 2.84 s

a = 10.9 / 2.84 = 3.83 m / [tex]s^{2}[/tex]

During the time period of 2.84 s, the distance covered is ,

s = ( 0 * 2.84 ) + 1/2 ( 3.83 * [tex]2.84^{2}[/tex] ) = (3.83 * 8.07) / 2

s = 15.44 m

Consider the sprinter maintains a constant acceleration after reaching his top speed.

The distance remaining in 100 m track = 100 - 15.44 = 84.56 m

Time taken to cover 84.56 m at 10.9 m / s with no acceleration is

84.56 = ( 10.9 * t ) + 1 / 2 ( 0 ) ( [tex]t^{2}[/tex] )

t = 7.75 s

Total time taken = 7.75 + 2.84 = 10.59 s

Acceleration is the rate of change of velocity. It is represented as a. Its unit is m / [tex]s^{2}[/tex]

Therefore, if a sprinter reaches his top speed of 10.9 m/s in 2.84 s , his total time to cover a distance of 100 m is 10.59 sec

To know more about acceleration

https://brainly.com/question/12550364

#SPJ4

A gaseous system's pressure will rise by a factor of 2 if its volume is increased by a factor of 3 and its temperature is raised by a factor of 6.

The stress at a location within a confined fluid or the perpendicular force per unit area are the two definitions of pressure used in the physical sciences. A surface will be subject to pressure from a 42-pound box with a bottom area of 84 square inches equivalent to half a pound per square inch of applied force. The weight of the atmosphere pressing down on each square inch of the Earth's surface is known as atmospheric pressure, which is approximately 15 pounds per square inch at sea level. In SI units, pressure is expressed in Pascals.

To know more about pressure, visit:

https://brainly.com/question/12971272

#SPJ4

A ball is thrown vertically downward with an initial speed of 15.8 m/s from a building whose height is 122 m. It takes the ball 3.63 s to strike the ground.

Because the object is moving downhill vertically, the motion has a negative acceleration value as well as a negative velocity value.

A quadratic function with concavity downwards can be used to represent both this kind of motion and the motion of the object thrown above.

h = h0 - v0t - [tex]\frac{gt^2}{2}[/tex]

so putting all the values, we have,

0 = 122 - 15.8t - 4.9 [tex]t^{2}[/tex]

then we know the formula,

t= [tex]\frac{-b±\sqrt{b^2-4ac}}{2a}[/tex] here a=-4.9 b= -15.8 c =122

now putting all the values, we have

t= 3.63 s

So, In 3.63 seconds, the ball lands on the ground.

To know more about Vertical motion visit:

https://brainly.com/question/12640444

#SPJ4