function onTime = RunningLate(noTraffic,gasEmpty) %onTime = (noTraffic)& not(gasE
What is MATLAB Documentation 1?function onTime = RunningLate(noTraffic,gasEmpty) % complete the logical expression to the right of = using the variables noTraffic and gasEmpty onTime = noTraffic & ~gasEmpty; % Check if the noTraffic is true and the gasEmpty is false if (noTraffic == true) && (gasEmpty == false) % set onTime to true onTime = true; end return;endThe function starts by setting onTime equal to noTraffic and the negation of gasEmpty, using the logical operator &. The negation of gasEmpty is calculated using the ~ operator. If noTraffic is true and gasEmpty is false, onTime will be true.Next, the function has an if statement to check if noTraffic is true and gasEmpty is false. If the conditions are met, onTime is set to true.Finally, the function returns the value of onTime by using the return statement. The function ends with the end keyword.To learn more about MATLAB Documentation 1 refers to:
brainly.com/question/30427440
#SPJ4
consider the 2014-t4 aluminum plate shown in sketch f. what is the largest tensile stress this plate can withstand? what is the largest center crack that can exist while ensuring that the material will still yield?
The largest tensile stress this plate can withstand is 49.3 ksi, and the largest center crack that can exist while ensuring that the material will still yield is 0.073 inches.
What is tensile stress?Tensile stress, also known as tension, is a type of mechanical stress that occurs when forces act on an object in opposite directions along its length. This force is often applied to a material by pulling it apart, stretching it, or compressing it. The direction of the applied force is typically along the length of the material, and results in a stress on the material that is perpendicular to the direction of the applied force. Tensile stress causes the material to elongate, or stretch, and can be measured by the change in length of the material. It is the opposite of compressive stress, which causes the material to shorten. The amount of stress experienced by the material is dependent on the magnitude of the applied force and the material's physical properties.
To learn more about tensile stress
https://brainly.com/question/17077889
#SPJ4
One of the most commonly used piping materials for building sewers is green or white PVC sewer and drain piping.True or False?
Green or white PVC sewer and drain piping is one of the most commonly used piping materials for building sewers. This is a true statement.
What is the material of the piping?Copper, PVC, CPVC, and PEX are the most frequently utilized plumbing piping materials. This article will provide an overview of these four materials as well as other building materials.
PVC and ABS are the most commonly used building materials for new homes, whereas cast iron was and is still the most common building material. You can simply replace the rusted sections of your cast iron pipes with PVC or ABS rather than replacing the entire set.
To learn more about PVC visit :
https://brainly.com/question/22850105
#SPJ4
it's desired to preheat a light oil being fed to distillation column by running it through heat exchangers and the heating medium is the hot oil coming from the bottom of the column. conditions apply to each streamlight oil; flow rate 160m^3/hr, specific gravity 0.72,specific heat 1.76kj/kg k,specific temperature 300k , still bottom;120m^3/hr flow rate, specific gravity 0.74, specific heat 1.76kj/kg k, specific temperature 480k. light oil leaves heat exchanger at 360k, what temperature is the oil from the still bottom leaving the heat exchanger. determine maximum temperature attained by light oil in counter and co-current manner fluid flows
This question requires a thermal analysis of the heat exchanger system, which would involve the calculation of heat transfer rate and the resulting temperature change in both the light oil and the hot oil from the still bottom. This would require an understanding of heat transfer principles and the application of energy balance equations.
To determine the maximum temperature attained by the light oil in the heat exchanger, you would need to consider the flow arrangement of the two fluids, whether they are flowing in counter-current or co-current direction. This would affect the heat transfer rate and the resulting temperature change in each fluid.
To calculate the temperatures, you would need to consider the heat transfer rate between the two fluids, the inlet and outlet temperatures of each fluid, and their specific heat capacities. The equations would need to take into account the heat transfer rate, mass flow rate, and temperature change for each fluid.
Once the temperatures have been calculated, you can then determine the maximum temperature attained by the light oil and the hot oil, which would depend on the flow arrangement and the heat transfer rate between the two fluids.
It is recommended that you consult with a specialist in the field of thermal analysis or heat transfer to accurately and properly determine the maximum temperature attained by the light oil in the heat exchanger.
Learn more about heat exchanger here: https://brainly.com/question/22595817
#SPJ1
There are critical times when memory problems often manifest themselves.
Match each critical time on the left with the corresponding cause of the memory problems on the right.
This event can require more memory and can cause problems if there is not enough memory when it occurs.
Memory is not properly seated or missing/the motherboard is defective.
Incompletely or improperly doing this can cause errors that appear to be memory-related.
The memory is not compatible and was not installed and configured properly.
Installation of software, the initial boot of a new computer, the addition or removal of hardware, and the proper memory upgrade.
How can my memory be upgraded?A computer's performance may be improved by adding more RAM or system memory. An update comprises either swapping out the old memory modules with a set of new ones with more capacity or installing new memory modules on top of the old ones.
Do memory upgrades make sense?Whether you choose to increase your memory or storage, your PC's performance will be noticeably better. If you add more RAM to a slow computer, it will run faster since it can handle more simultaneous tasks.
To know more about Memory upgrade visit
brainly.com/question/21106765
#SPJ4
which of the following statements about engineering design are true: group of answer choices engineering design is a strictly linear process. engineering design involves both analysis and synthesis. engineering design is characterized by a strong graphical component.
All of the statements about engineering design are true.
What is engineering design ?Engineering design is the process of devising a system, component, or process to meet desired needs. It is a decision-making process in which the basic sciences, mathematics, and engineering sciences are applied to convert resources optimally to meet these stated needs. It involves the creative application of scientific principles to design and build structures, machines, devices, systems, materials and processes.
1. Engineering design is a strictly linear process: Engineering design is a systematic process that involves breaking down a problem into smaller, manageable parts, analyzing each part, and then synthesizing a solution based on the analysis. This process is linear, meaning it progresses in a step-by-step manner.
2. Engineering design involves both analysis and synthesis: Analysis is the process of breaking down a problem into its component parts and understanding how they interact
3. Engineering design is characterized by a strong graphical component: Engineering design often involves creating and manipulating diagrams, drawings, and models to represent the problem, design solutions, and final product.
To learn more about engineering design
https://brainly.com/question/29403600
#SPJ4
question a manufacturer of cell phone screens has found that 5 percent of all screens produced have defects. let pd represent the population proportion of all cell phone screens with a screen defect, therefore pd
The correct choice is, according to the Central Limit Theorem: C The proportion of cell phone screens with a screen defect is represented by a mean proportion of 0.05 for all 400-sample samples from this population.
What is Central Limit Theorem ?According to the central limit theorem, the distribution of sample means will be approximately normally distributed if you take sufficiently large random samples from a population with replacement and a mean and standard deviation.
For a proportion p in a sample of size n, the Central Limit Theorem states that the mean of the sampling distribution of sample proportions is and the standard error is [tex]s = sqrtfracp(1 - p)n[/tex]. Given that the mean proportion of all samples is 0.05 in this case, the correct choice is C.
To learn more about Central limit theorem visit :
https://brainly.com/question/898534
#SPJ4
When servicing a heat pump system, which of the following is true regarding the installation of gauges on the system?
A. Gauges should be installed on the system each time the system is serviced.
B. Only the low-side gauge should be connected to the system during service.
C. Only the high-side gauge should be connected to the system during service.
D. Gauges should only be installed on a system if absolutely necessary.
When servicing a heat pump system, B. Only the low-side gauge should be connected to the system during service.
When servicing a heat pump system, it is generally recommended to only connect the low-side gauge to the system during the service process. The low-side gauge is used to measure the pressure and temperature of the refrigerant on the low-pressure side of the system. Connecting only the low-side gauge reduces the risk of contamination to the refrigerant, which can occur if the high-side gauge is connected and refrigerant is accidentally released into the atmosphere.
Additionally, connecting only the low-side gauge allows for a more accurate measurement of the refrigerant pressure, as the high-side gauge can be influenced by the compressor's operation. To ensure the proper operation of the heat pump system, it is important to follow industry guidelines and best practices when servicing the system, including the proper installation and use of gauges.
To know more about the heat pump, visit:https://brainly.com/question/10176010
#SPJ4
when connecting three transformers for three-phase use with a delta secondary, a voltage test should be done before closing the secondary. the correct voltage reading is .
When connecting three transformers for three-phase use with a delta secondary, a voltage test should be done before closing the secondary. The correct voltage reading is zero volts. The correct option is C.
What is transformer?A transformer is an electrical device that transfers energy from one electric circuit to another using the electromagnetic induction principle.
It is intended to change the AC voltage between the circuits while keeping the current's frequency constant.
Before closing the secondary when connecting three transformers for three-phase use with a delta secondary, a voltage test should be performed. Zero volts is the proper voltage reading.
Thus, the correct option is C.
For more details regarding transformer, visit:
https://brainly.com/question/15200241
#SPJ1
an orange and red triangular sign on a vehicle always means?
A resistor has the following color sequence red green orange red what is the resistance in ohms
The first two bands represents the first two digits of the resistance value in ohms.
What the multiplier will do to shift the decimal place around?This multiplier will shift the decimal place around to change the value from mega ohms to milliohms and anywhere in between. The fourth color band signifies tolerance. Giving a total of 1200+_10%.
The attachments show the labeling of the network nodes. We found it convenient to do this so we could identify the specific nodes any given branch was attached to. Then the connections for each resistor were identified, and the list sorted to make it easier to see parallel connections.
Therefore, The first two bands represents the first two digits of the resistance value in ohms.
Learn more about ohms on:
https://brainly.com/question/2141402
#SPJ1
one large problem designers face when designing air-cooled refrigeration and air conditioning equipment is a changing ambient from the changing seasons. true false
This statement is True: one large problem designers face when designing air-cooled refrigeration and air conditioning equipment is a changing ambient from the changing seasons.
Now more than ever, from tiny startups to Fortune 500 companies, design-driven thinking is everywhere. Success depends more and more on a company's ability to incorporate design into its core beliefs. Even with these victories, diversity is still one of design's major threats.
The lack of diversity among computer industry employees has received much attention. It is reported that efforts are being made to increase diversity among tech staff members, including designers and engineers. Nevertheless, the numbers have barely changed during the last two years. The majority of conference speakers, press subjects, and design leadership are still white men.
Those of us who are fortunate enough to already work in this sector must take more initiative. It must begin at the individual level. It is insufficient to attribute the lack of applications from women and people of color to the "pipeline."
To know more about design:
https://brainly.com/question/29606993
#SPJ4
which is true concerning the blue and magenta colors used to depict on sectional aeronautical charts?
On sectional aeronautical charts, airports with control towers are displayed in blue, whereas all other airports are depicted in magenta.
The sectional aeronautical chart is what?For the visual navigation of slow to normal speed aircraft, sectional charts are created. Contour lines, shading relief, drainage density, and a wide range of visual landmarks and checkpoints that are utilized for VFR flights make up the topographic information.
What distinguishes sectional from terminal charts?Pilots can learn more about the congested areas within and near Class B airspace from terminal charts. Even though they contain the same kinds of data as sectional charts, they provide more specifics, particularly regarding airspace, airports, obstacles, topography, and visual checkpoints.
To know more about Chart Visit:
https://brainly.com/question/22600816
#SPJ4
building a house of quality begins by identifying the voice of the customer and select , and listing them in the appropriate places in the diagram.
The first step in creating a House of Quality is to determine the customer's voice and the technical design aspects.
In design, what does technical mean?During the technical design phase, the event team writes the code and describes every minute aspect of the design—or at least some of it—in detail. It reveals to the designers what the system will actually do. The following graphic provides an illustration of technical design: Design for technology. It describes anything else that transforms the customer's requirements into a solution to their problem.
It describes the system's methods or functions.
It illustrates the conceptual model, or what a system ought to look like. It demonstrates the data's structure and flow. In addition to the strategies, it also includes the process and its sub-processes. It includes the conceptual design's operation and functioning.
To learn more about technical design visit :
https://brainly.com/question/29454868
#SPJ4
what is the relative resolution (i.e. how many discrete levels are there) of an oscilloscope with an 8-bit d/a converter? with a 12-bit d/a converter? with a 16-bit d/a converter?
what is the relative resolution (i.e. how many discrete levels are there) of an oscilloscope with 2^n, 8-bit D/A converter has 256 levels, 12-bit D/A converter has 4096 levels and 16-bit converter has 65536 levels.
In the system development and prototyping phases, oscilloscopes are of course the preferred tool for doing these measurements, but these are principally constrained by the vertical resolution of the scope's front-end. For instance, an 8-bit oscilloscope has a dynamic range of 256:1, therefore the theoretically lowest signal on a range of 1 volts is 3.9 millivolts (mV). Higher sensitivity and offset range are required to view millivolt level ripple signals on a 3.3 volt bus. Additionally, signal levels at the scope input will be muted when employing high attenuation probes to prevent circuit loading, making it difficult to measure them unless the instrument has a high resolution.
The ratio of the largest input signal an oscilloscope can handle to the smallest signal amplitude it can detect is known as oscilloscope vertical resolution. Resolution is often measured by the analog-to-digital converter's bit count (ADC). The resolution is equal to the amount of bits multiplied by two. The resolution of an 8-bit converter is therefore 28 or 256:1. The resolution of a 12-bit converter is 4096:1, which is 16 times higher than that of an 8-bit converter.
To know more about oscilloscope:
https://brainly.com/question/14945423
#SPJ4
Pebbling a checkerboard. We are given a checkerboard which has 4 rows and n columns, and has an integer written in each square. We are also given a set of 2n pebbles, and we want to place some or all of these on the checkerboard (each pebble can be placed on exactly one square) so as to maximize the sum of the integers in the squares that are covered by pebbles. There is one constraint: for a placement of pebbles to be legal, no two of them can be on horizontally or vertically adjacent squares (diagonal adjacency is fine). (a) Determine the number of legal patterns that can occur in any column (in isolation, ignoring the pebbles in adjacent columns) and describe these patterns. Call two patterns compatible if they can be placed on adjacent columns to form a legal placement. Let us consider subproblems consisting of the first k columns 1 ? k ? n. Each subproblem can be assigned a type, which is the pattern occurring in the last column. (b) Using the notions of compatibility and type, give an O(n)-time dynamic programming algorithm for computing an optimal placement
(a) The number of legal patterns that can occur in a single column is 3. The 3 patterns are:
2 pebbles placed on the top 2 rows.
2 pebbles placed on the bottom 2 rows.
1 pebble placed on the top row and 1 pebble placed on the bottom row.
These patterns are not compatible with each other, meaning that two columns cannot both have the same pattern.
(b) To solve the problem, we can use a dynamic programming algorithm. The idea is to keep track of the maximum sum that can be obtained from each subproblem with a specific type, and use this information to compute the maximum sum for the next subproblem.
Let's define f[k][i] to be the maximum sum that can be obtained from the first k columns with the last column being of type i.
The algorithm is as follows:
For k = 0, set f[0][i] = the sum of the integers in the squares covered by the i-th pattern in the first column.
For k = 1, 2, ..., n-1, do the following:
For each type i, compute the maximum sum that can be obtained from the first k columns with the last column being of type i.
f[k][i] = the maximum of f[k-1][j] + the sum of the integers in the squares covered by the i-th pattern in the (k+1)-th column, where j is any type that is compatible with type i.
The maximum sum that can be obtained from the first n columns is the maximum of f[n-1][i], where i is any type.
The time complexity of this algorithm is O(n), since each iteration of the outer loop takes O(1) time and there are O(n) iterations.
For more questions like Checkerboard visit the link below:
https://brainly.com/question/30144179
#SPJ4
how to the linear thermal expansion coefficients for steel, copper and aluminium compare ? fundamentally what are the differences occuring at the atomic level to cause the difference ? g
Since the linear expansion for steel, copper, and aluminum. Thus, the value of copper is lower than that of alum and lower than that of steel. Therefore, we might conclude that the steel expands less.
What is the thermal expansion coefficient of copper and aluminum?Copper and aluminum have the following thermal linear coefficients of expansion per degree centigrade: 17 10E-6 copper. 2310E-6 aluminum.
Which expands more, steel or aluminum?A steel panel that is 100' long and is subjected to a temperature change of 100°F will lengthen by 0.78", whereas an aluminum panel of the same length and subjected to the same temperature change will lengthen by 1.56".
To know more about linear expansion visit:-
https://brainly.com/question/22260757
#SPJ4
if a typical house uses 10,900kwh 10 , 900 kwh per year, calculate how many houses could have their full energy needs provided for one year by the turbine above if it continued to operate as described for one year. show your work.
That is equal to 1.2 6157 kW of power is being is being used by party house. So from here the number of houses comes out to be four 2 8, 4000, 428,038 houses.
How it is calculated?Given that:A typical house in the United States uses about 10,900 kWh,1 TWh (terawatt-hour) =1×10^6 GWh (gigawatt-hour) =1×10^9kWh (kilowatt-hour)The three Gorges Dam in China produces about 90TWh of electricity each year. If it was to to be built in the United states, the number of houses such a plant would be able to provide the electricity for in a year is given as:Number of houses = Amount of electricity produced in a year / amount of electricity used by each house.Number of houses = 90 TWh / 10,900 kWh = 90 × 10⁹ kWh / 10,900 kWh = 8256881Therefore the number of houses ≈ 8.25 million housesTo learn more about typical house refers to:
brainly.com/question/16273852
#SPJ4
i) the compositions of commercially available type i and type iii portland cements are often very similar. if so, what is the reason for type iii to provide consistent high early strength? ii) what temperature is typically reached in the hottest part of the cement kiln?
i) Type III Portland cement is designed to provide higher early strength than type I. This is because the production process for type III cement is altered to produce a more finely-ground cement, which is more reactive and therefore hydrate faster.
What is hydrate ?Hydrate is a term used to describe the process of adding water to a substance or material. It is most commonly used in the context of biology, chemistry, and biochemistry, but can also be used in other areas. Hydration is an essential process for all living organisms, as it helps to maintain the balance of fluids in the body. Hydration also plays an important role in the chemical reactions that occur in the body, such as digestion, energy production, and cell repair. Hydration is also important for the preservation of materials, such as food, paper, and other products. The process of hydration can involve the absorption of water into a material, or the displacement of water molecules from the surface of a material.
ii) The temperature reached in the hottest part of the cement kiln is typically around 1450°C. This high temperature is necessary to ensure that the raw materials are properly sintered, or fused together, to form clinker. The clinker is then ground to produce cement.
To learn more about hydrate
https://brainly.com/question/25500184
#SPJ4
a line chart displays a numerical variable as a series of data points connected by a line. which of the following are true of line charts? select all that apply.
We may draw two lines a day on a single chart, which is useful for monitoring trends or shifts over time.
How does that chart work?When it comes to visualizing data, a chart (sometimes referred to as a graph) uses symbols to represent the data, such as columns in a bar graphs, lines in a graphical form, nor slices in either a pie chart.
Describe a chart example?Data sets, frequency distributions, graphs, and descriptive statistics are examples of common graph types. Graphs are a fantastic tool for presenting statistics and presenting information. To display quantitative data that is unrelated to one another, use a graph or chart.
To know more about Chart visit:
https://brainly.com/question/29611383
#SPJ4
which of the following occurs in a file system or list when adding data about one subject requires we also add data about another subject?
This is known as a cascading relationship and is common when dealing with relational databases.
What is cascading relationship?A cascading relationship is a type of relationship between two or more entities in which the related entities share a hierarchical relationship. This type of relationship allows for the data in one entity to be automatically updated when data in the related entity is changed. For example, when a customer changes their address in their record, any orders they have placed with a company will also update to reflect the new address. Cascading relationships are often used to ensure that data remains accurate and up-to-date across multiple entities.
To learn more about entities
https://brainly.com/question/30033032
#SPJ4
which of the following products do not provide an enterprise database? group of answer choices ms sql server ibm db2 oracle rdbms ms access
MS Access, which does not offer an enterprise database, is the right response.
An enterprise database is what?An enterprise database is used by businesses and other big organizations to handle their massive data collections. A database of that kind of nature enhances productivity for firms.Except for MS Access, all other alternatives have corporate databases.Consequently, the correct response is that MS Access solutions do not offer an enterprise database.Oracle. enables access to data for managers, analysts, and IT from any location, even via mobile devices. Utilize insights to create a smooth customer experience throughout lead to contract to renewal by combining sales, marketing, as well as service data in a cohesive, prebuilt analytics solution.To learn more about enterprise database from the given link
https://brainly.com/question/29306552
#SPJ4
settlement of a building after it is constructed is likely to be the greatest under which conditions? group of answer choices foundation is bearing on engineered fill foundation is bearing on friction piles foundation is bearing on clay foundation is bearing on bedrock
Foundation is bearing on bedrock is likely to experience the least settlement after construction is complete.
What is bedrock ?Bedrock is a hard, solid rock that forms the Earth's crust, and is usually found underneath soil and other loose sedimentary material. It is composed of igneous, sedimentary, or metamorphic rocks that have been fused together over time due to heat and pressure. Bedrock is typically very hard and difficult to break or dig up, making it an ideal foundation for buildings, roads, and other structures. Bedrock is also important for providing stability to ground and groundwater systems, as well as for containing natural resources such as minerals, fossils, and oil.
While the other foundation types listed may experience some settlement, bedrock is the most stable and durable foundation type, making it the least likely to settle after construction is completed.
To learn more about bedrock
https://brainly.com/question/15741757
#SPJ4
which of the following is an example of an advantage of being able to access a database via the web? more than one answer may be correct.
The most prevalent database systems are relational databases, as explained. They consist of SQL Server, Oracle, Sybase, Informix, etc MySQL databases, among others.
What are examples and databases?A collection is a planned gathering of data. They enable the manipulation and storage of data electronically. Data administration is made simple by databases. A database is used to hold information on people, their phone calls, and other contact information in an online telephone directory.
How can a database be made?Select New Database from the context menu by right-clicking Databases. Select a database name in New Database. Select OK to establish the database using all default settings; otherwise, carry out the next optional procedures. to modify owner's name.
To know more about database visit:
https://brainly.com/question/29412324
#SPJ4
according to the discussion on address spaces on the textbook, which of the following statements is not true? a. each thread has its own address space; b. each process has its own address space; c. an address space refers to the set of addresses that a process or a thread can use; d. if an address can be represented in 64 bits, its corresponding address space is 264 bytes.
According to the dictionary's explanation of address spaces, if an object can be stored in 48 bits, its corresponding internet layer is 264 bytes. Two bits make form a crumb, four bits make, and eight bits make up a byte.
What exactly do bytes mean?In most computer systems, a byte is a resulting combination digit lengthy unit of data. To store a character, for instance a letters, number, or typographic sign, most computers utilize a unit called a byte.
How much data can fit into a byte?Bytes, which generally include eight bits, are the basic building blocks of digital information. The smallest unit of data that may be accessed in different computer systems is the byte.
To know more about bytes visit:
https://brainly.com/question/2280218
#SPJ4
Solve for x. −12x+13>35 Drag and drop a number or symbol into each box to correctly complete the solution. Put responses in the correct input to answer the question. Select a response, navigate to the desired input and insert the response. Responses can be selected and inserted using the space bar, enter key, left mouse button or touchpad. Responses can also be moved by dragging with a mouse. x Response area
Solving for x in the inequality results to
x < -1.83How to solve for xTo solve for x in the inequality
-12x + 13 > 35,
subtracting 13 from both sides:
-12x + 13 - 13 > 35 - 13
-12x > 22
divide both sides of the inequality by -12:
(-12x) / -12 > 22 / -12
x < -22/12
Finally, we'll simplify the expression on the right side of the inequality:
x < -1.83
So the solution is x < -1.83.
Learn more about inequality at:
https://brainly.com/question/29614698
#SPJ1
concept: random numbers are used in a variety of applications. java provides the random class that you can use to generate random numbers.
The Java Random class provides an easy way to generate random numbers, allowing developers to quickly and easily create random numbers for their applications.
What is class?Class is a template or blueprint used to create objects. It defines the properties and methods of a particular type of object.A class is a group of objects with a common type. It contains attributes, variables, and methods used to describe the behavior of an object. Class is a way of organizing objects of similar types and behavior. It is an encapsulation of variables and methods within a single unit. It helps in modularizing the program and helps in reducing the complexity of the program.
To learn more about class
https://brainly.com/question/26668139
#SPJ4
a high efficiency furnace main burner shuts off after initial ignition a toilet is cycling on and off, and the tank is refilling every few minutes. What should you check first?
1) flush valve
2) fill valve
3) flapper
4) handle
5) overflow tube
A high-efficiency furnace main burner shuts off after initial ignition a toilet is cycling on and off, and the tank is refilled every few minutes. The fill valve should be checked first. The correct option is 2.
What is a furnace?Air is heated by furnaces, and ducts are used to circulate the hot air throughout the house. Boilers heat water and produce steam or hot water for heating purposes.
Hot water can be delivered by baseboard radiators, radiant floor systems, or can heat air via a coil. Steam is distributed via pipes to steam radiators.
Therefore, the correct option is 2) fill valve.
To learn more about furnaces, refer to the link:
https://brainly.com/question/29690516
#SPJ1
4 for the following unit operations, a) identify the governing mass balance equations, b) determine the number of independent variables, c) determine the number of control variables, and d) design simple feedback control loops for each control variable.
The independent variables depend on unit operation, the control variables on process, and feedback control loops monitor & change process variables, according to the governing mass balance equations, which identify material flow.
What is loop?(a)The governing mass balance equations can be used to determine the materials that enter and leave a certain unit operation as well as the materials that are kept within the unit operation.(b) The quantity of independent variables varies according to the particular unit operation and the quantity of streams that enter and exit it.(c) The number of control variables is dependent on the process variables that must be altered to ensure the unit operation performs at its best.(d) The process variable must be monitored and compared to a desired setpoint in order to create a straightforward feedback control loop for each control variable. Corrective action must be made to put the process variable back within the required range if it is outside of it.To learn more about loop refers to:
brainly.com/question/30386739
#SPJ4
which of the following statement regarding load is false? group of answer choices dead load consists of the weight of the materials of which the building is constructed, such as walls, partitions, columns, framing, floors, roofs, and ceilings. building codes have tables that provide information regarding minimum required live loads. in building design, lateral load refers to the effects of wind and earthquakes. roofs are designed to support dead loads only.
The following is a load false statement: building codes have tables that provide information regarding minimum required live loads.
What is the physics equivalent of a load?A "load" or "fother" of metallic lead was, in the broadest sense, about or precisely equivalent to one long ton of 2240 lbs (1016 kg), or one tonne. There have been reports of others weighing between 991 kg and 2520 pounds (1143 kg).
What distinguishes effort from load?A load is anything we're attempting to move, lift, or just have external force operate on. The input force we use to move or lift a load is referred to as an effort.
To know more about load visit:-
https://brainly.com/question/20039214
#SPJ4
the circuit shown in figure p9.47 can be used as a variable noninverting amplifier. the circuit uses a 50 k potentiometer in conjunction with an ideal op-amp. (a) derive the expression for the closed-loop voltage gain vo /vi in terms of the potentiometer setting x. (b) what is the range of closed-loop voltage gain? (c) is there a potential problem with this circuit? if so, what is the problem?
When expressed in terms of potentiometer setting x, the closed-loop voltage gain vo/vi is equal to -0.5575.
Exactly how is closed-loop voltage gain determined?Figure 2's negative feedback circuit's closed-loop gain (Gv) is determined by dividing -R2/R1 by R1.
The proportion of output to input voltage in an amplifier is known as the voltage gain. The output voltage of the amplifier is also evident from this. As we can see, an amplifier's (-) symbol signifies that its output is vertical in relation to its input, and as a result, the amplifier gain is equal to (Rout/Rin).
Figure 2's negative feedback circuit's closed-loop gain (Gv) is determined by dividing -R2/R1 by R1.
Circuit's closed-loop gain (Gv) is,
-50/9.47 = 5.279/9.47 = - 0.5575.
When expressed in terms of potentiometer setting x, the closed-loop voltage gain vo/vi is equal to -0.5575.
To learn more about closed-loop voltage gain refer to:
https://brainly.com/question/14785715
#SPJ4