calculate the moles of ammonia present in a 2.475 g sample if the molar mass of ammonia is 17.030 g/mol. and provide your answer here. (show your work for full credit)

The empirical formula of the compound is Iridium:Oxygen = 1:2 or IrO2.

The empirical formula of a compound is the simplest whole number ratio of its elements.

To find the empirical formula of this compound, we first need to convert the masses of Iridium and Oxygen to moles.

The molar mass of Iridium is 192 g/mol, so the number of moles of Iridium is:

1.26 g / 192 g/mol = 0.006562 mol

The molar mass of Oxygen is 16 g/mol, so the number of moles of Oxygen is:

0.210 g / 16 g/mol = 0.013125 mol

Next, divide each mole value by the smallest mole value (0.006562 mol), to get the mole ratio of the elements:

Iridium: 0.006562 mol / 0.006562 mol = 1

Oxygen: 0.013125 mol / 0.006562 mol = 2

So, the empirical formula of the compound is Iridium:Oxygen = 1:2 or

IrO2.

Learn more about empirical formula here : brainly.com/question/1439914#

#SPJ1

A student assisting with the experiment would observe that all of the following statements about the electron transport chain are true EXCEPT: option (C) i.e. Every single electron carrier is movable and hydrophobic.

This statement is false because electron carriers in the electron transport chain can be hydrophilic or hydrophobic, and they may be mobile or anchored to a membrane. Their properties, such as hydrophobicity and mobility, depend on their specific role in the electron transport chain and the organisms they are found in.

1. In the ETC, carriers travel inside the inner mitochondrial membrane, passing electrons from one to another and pumping protons across the inner mitochondrial membrane.

2. Therefore, they are mobile. In order to travel inside the hydrophobic interior of the membrane, we would expect them to all be hydrophobic.

3. However, cytochrome c is a highly water-soluble protein, unlike other cytochromes.

To know more about electron please refer: https://brainly.com/question/18367541

#SPJ4

Question - A student assisting with the experiment would observe all of the following about the electron transport chain EXCEPT:

A. Electrons are passed from carriers with lower reduction potential to those with higher reduction potential.

B. The first electron carrier is also a proton pump.

C. Every single electron carrier is movable and hydrophobic

D. The electron carriers can transport a maximum of 2 electrons.

Indifference curve is locus of points which represent return at given level of risk

No. Investor blue could move to a higher indifference curve and achieve a higher level of satisfaction (as we can see that higher return is possible for the same level of risk) A graphic illustration of the utility of an investment is the indifference curve. An indifference curve displays different risk-return pairings that an investor might be willing to take on in order to retain a specific level of utility. The indifference curve would have a negative slope for a risk-taking investor. Her usefulness grows as the danger and return increase. A risk-neutral investor would have an indifference curve that is exactly horizontal.

Learn more about indifference curve from here:

https://brainly.com/question/24261444

#SPJ4

Between the plates, the electric field is constant everywhere. The fact that the electric field vectors are uniform in size and direction serves as a clue. E1 = E2 = E3 = E4 = E5.

A radially outward (inward) pointed electric field is being produced by a positive (negative) point charge. By definition, the electric field's direction corresponds to the force acting on a positive test charge.

A curve has an arrow on it. Determining the electric field's direction from the two potential directions suggested by a tangent to the curve is obviously necessary.

To know more about electric visit:-

https://brainly.com/question/20513633

#SPJ4

Chemistry is the study of:

a. the reactions between substances

c. matter

Chemistry is concerned with the study of matter and its properties, as well as the reactions between substances and the interactions between different substances and their behavior in different environments. The study of the forces that act on objects and the movement of objects falls under the realm of physics, not chemistry.

Chemists use various tools and techniques, such as spectroscopy and chromatography, to analyze and understand the behavior of substances. They also study chemical reactions and the transfer of energy during these reactions, which helps to explain why some reactions occur and others don't.

In addition to this, chemistry plays a crucial role in the development of new materials and processes through chemical synthesis. Chemists work to synthesize new materials with specific properties, such as increased strength or improved conductivity, which can have a wide range of applications in industries such as electronics, energy, and healthcare.

In conclusion, while chemistry has a broad range of applications, it primarily focuses on the study of matter and its reactions with other substances.

Learn more about matter here:

https://brainly.com/question/9402776

#SPJ4

The gas moving the slowest would be Argon (Ar). The speed of a gas molecule is determined by its temperature, which is related to its average kinetic energy.

The gas moving the slowest would be Argon (Ar). The speed of a gas molecule is determined by its temperature, which is related to its average kinetic energy. In general, the heavier a gas molecule is, the slower it will move, as it takes more energy to get it moving. Among the gases listed, Argon has the heaviest molecular weight and therefore would be expected to move the slowest. Helium (He) has the lightest molecular weight and would be expected to move the fastest, followed by Neon (Ne), Krypton (Kr), and Argon (Ar) in order of increasing molecular weight.

Learn more about gases here: brainly.com/question/14812509

#SPJ4

According to significant figures, the significant zeros in the following numbers are 5.08 b. 508 c. 5.080 x 10³ d. 0.05080.

Significant figures are used for establishment  of a number which is presented in the form of digits. These digits give a meaningful representation  to the numbers.

The significant figures are the significant digits which convey the meaning according to the accuracy. These provide precision to the numbers and hence are called as significant numbers.There are rules for counting significant figures which are as follows:

1)All non-zero digits are significant .

2)All zeroes which occur between non-zero digits are significant.

3)All zeroes to the left and right of  a non-zero digit are not significant.

4) All zeroes on right  of decimal are significant if a non-zero number follows them.

5)All zeroes on right side of non-zero digit are significant.

Learn more about significant figures,here:

https://brainly.com/question/29153641

#SPJ1

A material's intermolecular forces of attraction are stronger in a substance with a higher melting point than they are in a substance with a lower melting point, according to forces of attraction.

What do forces of attraction consist of?

A force that brings together the atoms in a molecule is called a force of attraction. It is essentially a force of attraction in nature. Additionally, it can function between an ion and an atom. For different states of matter, such as solids, liquids, and gases, it varies.

The forces of attraction are greatest in solids because the molecules there are firmly bound, whereas they are least in gases since the molecules are spread out. In between the forces of attraction of solids and gases, there are liquids.

The forces of attraction that exist in the substances are what determine their physical attributes, including melting point, boiling temperature, and density.

For such more question on intermolecular forces

https://brainly.com/question/13588164

#SPJ4

The volume of titanium would have a mass of 68.9186 grams is 15.180 cm​​​³.

The term volume is defined as the space occupied within the boundaries of an object in three-dimensional space. It is also known as the capacity of the object. Two examples of cubic units are cm3 or in3.

Given:

Density = 4.540 gm/cm​​​​​3

mass =  68.9186 grams

Volume = ?

As we know the formula of density = mass / volume

Therefore, volume = mass / density

volume = 68.9186  gm / 4.540 gm/cm​​​​​3

volume = 15.1803 cm​​​³

Thus, the volume of titanium would have a mass of 68.9186 grams is 15.180 cm​​​³.

To learn more about the volume, follow the link;

https://brainly.com/question/1578538

#SPJ1

a) The empirical formula of the hydrocarbon is therefore [tex]C_1H_{2.6}[/tex].

b) (i)The molar mass of the hydrocarbon can be calculated from its density is 196 g/mol and (ii) the molecular formula is [tex]C_{12} H_6[/tex].

c) The value of AH is [tex]-4.85*10^{3}[/tex] KJ/mol

(a) To determine the empirical formula of the hydrocarbon, the number of moles of carbon and hydrogen must be calculated, and the ratio of these moles should be expressed as the smallest whole numbers.

n(C) = [tex]\frac{6.000}{12.011} = 0.4992[/tex] mol

n(H) = [tex]\frac{1.344}{1.008} = 1.33[/tex] mol

The ratio of these moles is [tex]\frac{0.4992}{1.33} = 1:2.66[/tex]

The empirical formula of the hydrocarbon is therefore [tex]C_1H_{2.6}[/tex]

(b) (i) The molar mass of the hydrocarbon can be calculated from its density:

[tex]\frac{(1.96*1000)}{0.1} = 196[/tex] g/mol

(ii) To find the molecular formula of the hydrocarbon, divide the molar mass by the empirical formula mass and multiply all subscripts in the empirical formula by this ratio.

[tex]\frac{196}{(12.011+2(1.008)} = 16.0[/tex]

Multiplying the subscripts in the empirical formula by 16 yields the molecular formula: [tex]C_{12}H_6[/tex].

(c) To calculate the value, multiply the heat of combustion per mole of heptane by the number of moles:

[tex]-4.85*10^{3}*1[/tex] = -4.85 x 10^{3} kJ/mol

Learn more about hydrocarbon

brainly.com/question/17578846

#SPJ4

The number of bonding pairs and the number of lone pairs around the right hydrogen atom in this molecule is 1 in no. (bonding pairs) and 0 in no. (lone pairs).

The right hydrogen atom in this molecule is bonded to the carbon atom through a single bond. The carbon atom in turn has a total of four bonds: two with the hydrogen atoms and two with the other carbon atom in the molecule. In the Lewis structure, a single bond is represented by a line connecting two atoms. A pair of electrons shared between two atoms is called a bond pair. Thus, the right hydrogen atom has 1 bonding pair and 0 lone pairs. Lone pairs refer to electrons that are not involved in bonding but are present around an atom. In this molecule, the right hydrogen atom only has one bonding pair, and no electrons are present as lone pairs.

To know more about atom please refer: https://brainly.com/question/8860189

#SPJ4

The MO theory predicts that the three molecular orbitals that pi electron of benzene occupy—y1, y2, and y3—have lower energies than an electron in a standalone p orbital. Over all six carbon nuclei.

Because of the way that benzene makes the body's cells behave, poisoning can be fatal. The bone marrow cells' ability to make red blood cells can be affected by exposure to benzene, as can the immune system's white blood cells.

Benzene is a typical industrial chemical. Benzene, a key ingredient in gasoline, can be found in crude oil. It is used to create a variety of products, including plastics, resins, synthetic textiles, rubber lubricants, dyes, detergents, and insecticides. Benzene is produced naturally by volcanoes and wild fires.

To know more about benzene visit:

https://brainly.com/question/14525517

#SPJ4

Being non-polar and a liquid at normal temperature, bromine, Br2, will mix with CCl4, another non-polar molecule.

Being non-polar and a liquid at normal temperature, bromine, Br2, will mix with CCl4, another non-polar molecule. While the others are all liquids at ambient temperature, their polar nature prevents them from mixing with CCl4. In contrast to ethanol and water, "CCl (4)" and "CCl (4)" are miscible in all amounts. Compare this behavior to the molecules of these substances. Nonpolar and organic solvents include carbon tetrachloride. Additionally a non-polar and organic solvent, benzoene. based on the similar-to-dissolve-like theory of solubility. Benzene and carbon tetrachloride are thus miscible liquids.

Learn more about non-polar molecule from here:

https://brainly.com/question/15173422

#SPJ4

In the first option , the order of decrease in electronegativity is Li, Na and K.  In second option, the order is  Ca, K, Sc The order in the third group is S, As, Sn.

Electronegativity of an atom is the ability of its nucleus to attracts the share pair of electrons towards it. Elements like, fluorine, oxygen, nitrogen etc .are  highly electronegative.

In periodic table, along a period electronegativity increases. Whereas down  group, electronegativity decreases. The first groups elements are Li, Na , K and Cs and Fr. Hence, electronegativity decreases from Li to K.

Among, K, Sc and Ca, Ca is comparatively electronegative than K. Sc is a transition metal and not electronegative. In the last group the S is mot electronegative than As more than Sn.

Find more on electronegativity:

https://brainly.com/question/29203628

#SPJ1

Complete of row:

A mole is a unit of account for chemistry. The unit of account is used to facilitate the calculation of an object.

One mole of any substance will have the same number of particles, which is equal to 6.02 × 10²³ particles." For example, 1 mole of air contains 6.02 × 10²³ molecules of H₂O. 1 mole of oxygen gas contains 6.02 × 10²³ molecules of O.

The mole scale is needed as an indication of the amount of substance or compound, mole is the gram of substance divided by the relative molecular mass (Mr). The formula for calculating the moles of a compound is n = gram/Mr, in this case, n is the moles of the substance and gr is the mass of the substance.

Learn more about mole at https://brainly.com/question/29367909

#SPJ1

Among the elements listed, Chlorine (Cl) has the smallest atomic radius. Chlorine is placed far right in the period and has the smallest atomic radius due to its high atomic number and resulting strong attraction of electrons to the nucleus.

Atomic radius refers to the size of an atom and is usually defined as the distance between the nucleus and the outermost shell of electrons. The size of an atom is determined by the number of electron shells and the energy level of the electrons.

As you move from left to right across a period (row) in the periodic table, the atomic number (number of protons) increases, which means there are more protons in the nucleus. The increased positive charge in the nucleus attracts the electrons more strongly, resulting in a smaller size.

Therefore, among the elements listed (Mg, Sr, Si, Cl, I), Cl, which is on the far right of the period, has the smallest atomic radius due to its high atomic number and resulting strong attraction of electrons to the nucleus.

Learn more about atomic number here:

https://brainly.com/question/14190064

#SPJ4

110 ml is equal to 5% of 200 ml. The total volume of the solution is 625 ml after mixing with 425 ml of pure acid. 425 + 110 = 535 ml make up the entire pure solution. The ratio is therefore (535*100)/625 = 85.6%.

Typically, acids can be categorised into three main groups. Binary acid comes in first, followed by oxyacid and carboxylic acid, respectively. All of the names of binary acids begin with "H-A," which stands for a hydrogen bond to a nonmetal atom.

An acid is a chemical that, when dissolved in water, produces hydrogen ions (H+). When dissolved in water, a material produces hydroxide ions, or OH-.

To know more about acid visit :-

https://brainly.com/question/29796621

#SPJ4

2-Bromopropane is created when hydrobromic acid and propene undergo an addition process. The identical reaction results in 1 bromopropane when benzoyl peroxide is present.

While the halide group attaches to the carbon atom with the most alkyl substituents when a protic acid (HX) is introduced to an asymmetric alkene, the acidic hydrogen adheres to the carbon with the most hydrogen substituents.

The free-radical mechanism governs the addition reaction of HBr to an asymmetrical alkene in the presence of peroxide.  Here, bromine radical is formed which reacts with an alkene and produces an anti-markovnikov product.

To learn more about hydrobromic acid visit:

brainly.com/question/15231576

#SPJ4

Answer:

B

Explanation:

A black colour object absorbs all wavelengths of light and reflects none. Therefore, black colour objects will absorb more heat. Objects that are white, on the other hand, reflect all wavelengths of light and therefore absorb the least heat.

The unknown organic compound emphirical formula is C18H24O3.

The emphirical formula becomes C6O1H8

n = molar mass / emphirical formula mass

= 288.38 g/mol/(72+16+8) g/mol

=288.38/96 = 3

So molecular formula becomes = n * emphirical formula

= C18H24O3

The molecular formula is a way of expressing the number and types of atoms in a molecule. It is written as a combination of chemical symbols and subscripts and represents the actual composition of a molecule. The molecular formula provides information about the type of element that makes up a molecule and the number of atoms of each element present.

This information is critical for understanding the properties and behavior of a molecule and is used in many areas of science and engineering, including chemistry, biochemistry, pharmacology, and materials science. The molecular formula is also useful for identifying and synthesizing compounds, as well as for characterizing and determining the structure of molecules. In conclusion, the molecular formula is an essential tool for scientists and engineers, providing important information about the composition and properties of molecules.

To learn more about Molecular formula visit here:

brainly.com/question/28647690

#SPJ4

Two liquids are being poured: one is an oxidising chemical and the other is corrosive, flame-flammable chemical. Away from other chemicals, especially flammables, keep oxidizers.

Chemicals ought to be kept in hazard class storage (i.e. flammable with flammable, oxidizers with oxidizers, etc.) During storage, incompatible compounds need to be physically separated from one another. Direct sunlight or intense local heat shouldn't be allowed to touch chemicals. Corrosives should not be near anything with which they might react.

Each pictogram is a symbol on a white backdrop with a red border that denotes a specific danger (s). The classification of the chemical danger determines the pictogram on the label. OSHA will require the use of only eight of the nine pictograms that the GHS employs.

To learn more about GHS Symbols visit:

brainly.com/question/28450956

#SPJ4

The molar solubility (s) of PbI2 (s) in distilled water can be determined by the equation: s = [PbI2] / (1 + Ksp / [I-])

Where [PbI2] is the concentration of PbI2 in the solution, [I-] is the concentration of iodide ions in the solution, and Ksp is the solubility product constant of PbI2

The quantity of ions dissolved per litre of solution is measured by molar solubility. The quantity of ions that are dissolved in this situation's amount of solvent is represented as solubility.

The equilibrium constant for a solid material dissolving in an aqueous solution is the solubility product constant, Ksp. It stands for the degree of solute dissolution in solution. A substance's Ksp value increases with how soluble it is.

For such more question on gas volume

https://brainly.com/question/16027456

#SPJ4

The central box of a boxplot has the median of the data above it.

Median is a mathematical term used to describe the middle value of a set of data or a distribution. It is often used in statistics to describe the central tendency of a set of data. The median is calculated by arranging all the values in a set of data in numerical order and identifying the middle value. If the data set has an odd number of values, then the median is simply the middle value. However, if the data set has an even number of values, then the median is calculated by taking the average of the two middle values.

The median is considered to be a more robust measure of central tendency compared to the mean because it is less affected by extreme values or outliers. It provides a better representation of the central value of a data set when the distribution is skewed or has extreme values. In these cases, the mean can be greatly influenced by the outliers, leading to a misrepresentation of the central tendency.

To learn more about Median visit here:

brainly.com/question/29150855

#SPJ4

40.66 g of MgCl2 hexahydrate of solid reagent we would need to add to make the following:- (A) 125 mM Of Tris (B) 1.5 M of NaCl (C) 203.3 g of MgCl2 (D) 2 g of ampicillin (E) 142 g of lysozyme and for (F) it is given below.

(A) To make 250 ml of 0.5 M Tris,

you would need to add

= (0.5 M) x (250 ml)

= 125 mM of Tris.

(B) To make 0.3 L of a 5 M solution of NaCl,

you would need to add

= (5 M) x (0.3 L)

= 1.5 Moles of NaCl.

(C) To make 200 ml of a 1 M solution of MgCl2,

you need to first calculate the amount of MgCl2 hexahydrate required to make 1 M of MgCl2.

The molecular weight of MgCl2 hexahydrate is 203.3 g/mol.

So,

= (1 M) x (203.3 g/mol)

= 203.3 g of MgCl2 hexahydrate are needed to make 1 M of MgCl2.

To make 200 ml of a 1 M solution of MgCl2,

you would need

= (1 M) x (200 ml)

= 200 mM of MgCl2 hexahydrate,

= (200 mM) x (203.3 g/mol)

= 40.66 g of MgCl2 hexahydrate is the solid reagent.

(D) To make 20 ml of a 100 mg/ml solution of ampicillin,

you would need to add

= (100 mg/ml) x (20 ml)

= 2 g of ampicillin.

(E) To make 5 ml of a 2 µM solution of lysozyme,

you need to first calculate the molecular weight of lysozyme.

The molecular weight of lysozyme is 14.3 kDa,

= 14,300 g/mol.

So,

= (2 µM) x (5 ml) x (14,300 g/mol)

= 142 g

lysozyme are needed to make 5 ml of a 2 µM solution of lysozyme.

(F) To convert the following to liters:

5 nanoliters = 5 x 10^-9 L

25 microliters = 25 x 10^-6 L

30 milliliters = 0.03 L

10 deciliters = 1 L

5 kiloliters = 5000 L

To know more about reagent please refer: https://brainly.com/question/29995603

#SPJ4

Question - 1. you have been hired as a lab assistant in a major pharmaceutical company and your team leader has asked you to prepare several solutions. calculate how much of the solid reagent you would add to make the following solutions:

(A) 250 ml of 0.5 M Tris.

(B) 0.3 L of a 5 M solution of NaCl.

(C) 200 ml of a 1 M MgCl2 from a bottle of Magnesium chloride hexahydrate.

(D) 20 ml of a 100 mg/ml solution of ampicillin

(E) five MLA offer two micromolar solution of lysozyme. Find molecular weight as mentioned above.

(F) convert using scientific notation to liters: 5 nanoliters, 25 microliters, 30 milliliters, 10 deciliters, 5 kiloliters.

Answer:

13 mins

Explanation:

We need to find how many half lives are required to reach .0313

.0313 = 1/2^n    log both sides and solve for n

log.0313 / log (1/2 )   = n     where n= NUMBER of halflives

n = ~ 5 half lives

   these 5 half lives took up 65 minutes

       so EACH half life is 65/5 = 13 mins

The reaction quotient Q is a measure of the relative amounts of products and reactants present in a reaction at a given time. The equilibrium will be shifted towards left.

The correct option is A) Qc= 1.0 X 10-3 , proceeds right

The concentration of the reactants inside the catalyst particles is uneven. The reagent concentration is highest on the outer surface and lowest in the center, forming an exterior to interior decay profile. Product concentrations have an inverse distribution. It is important to determine the concentration distribution within the catalyst particle, as the reaction rate at a given temperature is determined only by the concentration.

The expression for the reaction quotient is,

Q = [N₂][H₂]³/ [NH₃]²

= 1 × 1³/0.2²

= 25

But K=17.

Therefore, the value of the reaction coefficient is greater than the value of the equilibrium constant. That is, the concentration of the product is greater than equilibrium. So the balance shifts to the left.

Complete Question:

The initial concentrations or pressures of reactants and products are given for the following system. Calculate the reaction quotient and determine the direction in which each system will proceed to reach equilibrium.

2NH3 (g) ⇌ N2(g) + 3H2 (g), Kc =17; [NH3] = 0.50 M, [N2] = 0.15 M, [H2] = 0.12 M

A. Qc= 1.0 X 10-3 , proceeds right

B. Qc= 1.0 X 103 , proceeds left

C. Qc= 1.0 X 10-2 , proceeds right

Learn more about reaction quotient:-

https://brainly.com/question/12693045

#SPJ4

Type III immune complex-mediated reactions refer to the formation and accumulation of immune complexes in the body, which trigger an immune response that can lead to tissue damage. Obesity is associated with chronic low-grade inflammation, which can result in the formation of immune complexes.

Hypothetically, some possible pathophysiologic changes as a result of obesity may include:

Inflammation: Obesity is associated with chronic low-grade inflammation, which can lead to the formation of immune complexes. These immune complexes can then trigger an immune response, leading to further tissue damage and inflammation.

Tissue damage: Immune complexes can cause tissue damage by activating the complement system, which leads to the release of cytokines and other pro-inflammatory molecules that can cause inflammation and tissue damage.

Atherosclerosis: Immune complexes can deposit in the walls of blood vessels, triggering an immune response that contributes to the development of atherosclerosis, which is the build-up of fatty deposits in the arteries.

Insulin resistance: Chronic inflammation associated with obesity can also lead to insulin resistance, which is a condition where the body becomes less sensitive to insulin and less able to effectively regulate blood sugar levels.

Non-alcoholic fatty liver disease (NAFLD): Immune complexes can also accumulate in the liver, triggering an immune response that contributes to the development of NAFLD, a condition in which excess fat accumulates in the liver and causes liver damage.

These are some of the potential pathophysiologic changes that can occur as a result of obesity and the accumulation of immune complexes. It is important to note that these changes can lead to the development of a wide range of chronic diseases, including cardiovascular disease, diabetes, and liver disease, among others.

Learn more about immune complex here:

https://brainly.com/question/13051439

#SPJ4

Since ethanol has the strongest intermolecular attractions and no other liquids have intermolecular H-bonding, ethanol has the highest viscosity.

Generally speaking, the viscosity of liquids increases with increasing intermolecular forces (IMF). Temperature and molecule structure are two more variables that affect viscosity. Higher average kinetic energy at higher temperatures will result in molecules moving more quickly. Lower viscosity will result from this.

The ability of a fluid to flow is determined by its viscosity. High viscosity fluids flow more slowly than low viscosity fluids due to their high resistance. In general terms, a fluid's viscosity decreases the more easily it travels.

To know more about viscosity visit :-

https://brainly.com/question/4513132

#SPJ4

When alanine (Ala) reacts with the substrate (r1-COO-), a peptide bond is formed between the carboxyl group of the substrate (COO-) and the amino group of the alanine (-NH3+).

This results in the formation of the molecule r1-Ala-COO-, where the "r1" indicates the solid substrate and "Ala" represents the alanine. At a neutral pH, the carboxyl group of the substrate will have a negative charge (COO-), while the amino group of alanine will have a positive charge (-NH3+). The formation of the peptide bond results in a molecule with a neutral charge.

It is important to note that the carboxyl group of the substrate and the amino group of alanine can react with other substrate or amino acid molecules to form additional peptide bonds, leading to the formation of longer peptide chains. This reaction is the basis of peptide synthesis and is used in the production of peptides, proteins, and other biologics.

Learn more about alanine:

brainly.com/question/19088437

#SPJ4

According to half  life, it would take 15 days for selenium-83 to get reduced to 1.25 mg.

Half -life of a substance is defined as the time which is required for half of the quantity of a radioactive substance to get decayed.It is a term which is used in nuclear chemistry for describing how quickly unstable atoms undergo radioactive decay into other nuclear species by emitting particles or the time which is required for number of disintegrations per second of radioactive material to decrease by one half of its initial value.

In 1st half life= 5 mg

In 2 nd half life= 10/2= 2.5 mg

In 3 rd half life= 5/2=1.25 mg

3 half lives = 3×5=15 days, thus, it would take 15 days for selenium-83 to get reduced to 1.25 mg.

Learn more about half life,here:

https://brainly.com/question/24710827

#SPJ1