In the given chemical equation, the limiting reactant is calcium as the amount of it present will limit the product formation once it is used up.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ1
if a mixture of two moles each of gases A and B are mixed to give a total pressure of 20 atm pressure. calculate the partial pressure of gases A and B
If a mixture of two moles each of gases A and B are mixed to give a total pressure of 20 atm pressure, the partial pressure of gases A and B is 10 atmospheres.
What is pressure?Pressure is defined as the force applied on an object perpendicular to it's surface per unit area over which it is distributed.Gauge pressure is a pressure which is related with the ambient pressure.
There are various units by which pressure is expressed most of which are derived units which are obtained from unit of force divided by unit of area . The SI unit of pressure is pascal .
It is a scalar quantity which is related to the vector area element with a normal force acting on it.It is distributed over solid boundaries and across arbitary sections of fluid normal to the boundaries at every point.
Learn more about pressure,here:
https://brainly.com/question/14760196
#SPJ1
true/false. a chemist has three compounds of similar molecular weight, but with different dominant intermolecular forces. select the compound that should have the lowest boiling point, based on the compound's dominant intermolecular force.
The statement is true, a chemist has three compounds of similar molecular weight, but with different dominant intermolecular forces.
A compounds with weaker intermolecular forces should have a lower boiling point compared to a compound with stronger intermolecular forces. Boiling point is directly proportional to the strength of intermolecular forces in a substance. The dominant intermolecular force in a substance determines the strength of these forces and thus affects the boiling point. For example, if one of the compounds has weak dispersion forces as its dominant intermolecular force, it should have the lowest boiling point compared to compounds with stronger forces such as hydrogen bonding or ionic bonding.
To know more about compounds please refer: https://brainly.com/question/20701644
#SPJ4
give one permissible set of four quantum numbers for each of the outermost electrons in a single as atom when it is in its ground state.
In quantum mechanics, the state of an electron in an atom is described by four quantum numbers: the principal quantum number (n), the angular momentum quantum number (l), the magnetic quantum number (m), and the spin quantum number (s).
For the outermost electrons in a single arsenic atom in its ground state, one possible set of four quantum numbers would be n=4, l=3, m=-3, s=1/2.
The principal quantum number (n) describes the energy level of the electron, with larger values of n corresponding to higher energy levels. In this example, the electron is in the fourth energy level (n=4).
The angular momentum quantum number (l) describes the shape of the electron's orbital, with values ranging from 0 to n-1. In this example, the electron is in a p orbital (l=3).
The magnetic quantum number (m) describes the orientation of the electron's orbital in space, with values ranging from -l to +l. In this example, the electron's orbital is oriented in the direction of -3 times the z-axis.
The spin quantum number (s) describes the intrinsic angular momentum of the electron, with a value of 1/2. This intrinsic angular momentum is a fundamental property of electrons and is not related to their orbital motion.
This set of quantum numbers describes one of the two electrons in the outermost shell of the arsenic atom in its ground state. Another electron in the same shell could have a different set of quantum numbers, but it would still be subject to the same overall energy and angular momentum constraints.
Learn more about quantum mechanics:
brainly.com/question/11855107
#SPJ4
a scrubber on a coal-fired power plant is useful to remove which of the following? sulfur dioxide carbon dioxide particulate matter i only ii only iii only i and iii only
sulfur dioxide. The scrubber is an apparatus installed in a coal-fired power plant to clean the passing gas through the smokestack.
Why do people use sulfur scrubbing?In order to lessen acid rain, there are additional methods in use that really can extract sulfur dioxide in waste gases.These procedures, known as "sulfur scrubbing," can remove and over 95% of the sulfur dioxide present in waste gases.
How may sulfur emissions from coal-fired power plants be reduced?Utilizing less sulfuric coal is one option.The coal can also be "washed" to get some of the sulphur out.Scrubbers are a piece of machinery that the power plant can add to remove sulfur dioxide from waste gases the smokestack.
To know more about sulfur dioxide visit:
https://brainly.com/question/9720549
#SPJ4
If 270 million tons of sulfuric acid have a mass of approximately 2.7 x 1014 g. what mass of sulfur is needed to produce 270 million tons of sulfuric acid?
As per the given reaction 2 moles or 64 g of S produces moles or 196 g of sulphuric acid. Hence, mass of sulphur needed to produce 2.7× 10¹⁴ g of sulphuric acid is 8.8 × 10¹³ g.
What is sulphuric acid ?Sulphuric acid is a very strong acid having very much industrial and laboratory significance. It is industrially produced by the combination of sulfur and oxygen gas.
From the balanced equation, it is clear that, 2 moles of S gives 2 moles of sulphuric acid.
molar mass of sulphuric acid = 98 g/mol
mass of 2 moles = 196 g.
mass of S = 32 g
mass of 2 moles of S = 64 g.
Then the mass of S required to produce 270 million tones of sulphuric acid is :
( 2.7× 10¹⁴ g × 64)/196 g = 8.8 × 10¹³ g.
Therefore, the mass of S required to 270 million tones of sulphuric acid is 8.8 × 10¹³ g.
Find more on sulphuric acid:
https://brainly.com/question/28513840
#SPJ1
which of the following best explains why more contaminants are leached when solid waste is crushed into small particles and put in contact with water than when the particles are large?
The following which best explains why more contaminants are leached when solid waste is crushed into small particles and put in contact with water than when the particles are large is that smaller particles have a larger surface area per unit volume than larger particles.
What is a Contaminant?This is referred to as a biological, chemical, physical or radiological substance that becomes harmful for humans or living organisms.
Smaller particles have a larger surface area per unit volume than larger particles which is why more contaminants are easily leached.
Read more about Contaminant here https://brainly.com/question/13754321
#SPJ1
Magnesium is the limiting reactant in this experiment. calculate the theoretical yield of MgO for each trial using stoichiometry.
Trial 1:
Trial 2:
The theoretical yield of the reaction is 0.26 g.
What is the stoichiometry?Stoichiometry is the branch of chemistry that deals with the quantitative relationships between reactants and products in a chemical reaction. It involves the calculation of the amount of reactants needed to produce a certain amount of product, or vice versa. The stoichiometric coefficients in a balanced chemical equation represent the ratio of the moles of reactants to the moles of products in the reaction.
For trail 1- Mass of Mg = 26.985 - 26.679 = 0.306 g
Mass of MgO = 27.178 - 26.679 = 0.499 g
The Number of moles of Mg = 0.306 g/24 g/mol
= 0.013 moles
2 moles of Mg gives 1 mole MgO
0.013 moles will give 0.013 moles * 1 mole/2 moles
= 0.0065 moles
Mass of the MgO = 0.0065 moles * 40 g/mol
= 0.26 g
Learn more about theoretical yield:https://brainly.com/question/14966377
#SPJ1
which of the following is a correct prediction of the chemical shifts for the signals in the 1h nmr spectrum for the following compound?
The correct option is B, I = 1.1 ppm, II = 3.2 ppm, III = 1.4 ppm, IV = 0.9 ppm this compound is a correct prediction of the chemical shifts for the signals in the 1h nmr spectrum.
Spectrum refers to the range of different frequencies that make up different forms of electromagnetic radiation, such as radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. The electromagnetic spectrum is often visualized as a continuous range of frequencies from low to high, with each frequency corresponding to a different type of electromagnetic radiation.
In practice, the spectrum is divided into different regions based on the frequency of the radiation and its properties, with each region having different uses and applications. For example, radio waves are used for communication technologies like cell phones and Wi-Fi, while X-rays are used for medical imaging and radiation therapy. Understanding the electromagnetic spectrum is important for developing new technologies, as well as for understanding the behavior of matter and energy in the universe.
To learn more about Spectrum visit here:
brainly.com/question/3997802
#SPJ4
Complete Question:-
Which of the following is a correct prediction of the chemical shifts for the signals in the H NMR spectrum for the following compound?A. I = 0.9 ppm, II = 2.7 ppm, III = 1.2 ppm, IV = 0.9 ppm B. I = 1.1 ppm, II = 3.2 ppm, III = 1.4 ppm, IV = 0.9 ppm C. I = 0.9 ppm, II = 1.7 ppm, III = 1.2 ppm, IV = 1.1 ppm D.I = 0.9 ppm, II = 1.9 ppm, III = 3.4 ppm, IV = 0.9 ppm E. none of the these
FILL THE BLANK Most elements occur in compounds combined with other elements by forcing chemical __, which are formed by the interaction of the __ of the atoms involved
Most elements occur in compounds combined with other elements by forming chemical bonds, which are formed by the interaction of the electrons of the atoms involved.
Chemical bonds are forces that hold atoms together to form molecules. There are several types of chemical bonds, including covalent bonds, ionic bonds, and metallic bonds, among others. The type of bond formed between two or more atoms depends on the electronegativity of the atoms involved and the nature of the interaction between their electrons.
In covalent bonds, atoms share electrons to form a shared electron pair and form a covalent bond. Covalent bonds are usually formed between atoms with similar electronegativities, and the bond is strongest when the electrons are shared equally between the atoms.
Ionic bonds, on the other hand, are formed when one atom donates an electron to another atom to form ions. Ionic bonds are typically formed between atoms with significantly different electronegativities, and the bond is strong because of the strong attraction between the positively charged ion and the negatively charged ion.
Metallic bonds are formed between metal atoms and involve the sharing of electrons between metal atoms to form a metallic lattice structure. The electrons in metallic bonds are delocalized, which means they are not associated with a single atom but are shared by all the metal atoms in the lattice.
Learn more about lattice here:
https://brainly.com/question/29441166
#SPJ4
Hi please help with AP Chem
The half-life of a reaction is described as the time required for the concentration of the reactant to decrease to one-half of its initial value.
The relationship between the concentration of A and the half-life can be shown as:
t1/2 = k / 2.303 / [A]
The reaction is first order, so the rate constant can be shown as:
k = k' * e^(-Ea/RT)
t1/2 = (1 / 0.0387 M s^-1) * 2.303 / 0.333 M = 62.12 s
Therefore, the half-life of the reaction is 62.12 s at 400°C.
Learn more about half-life of a reaction at: https://brainly.com/question/1160651
#SPJ1
given 6.19 grams of H2, how many grams of CO are required?Please look at screenshot.
As per the given balanced chemical equation of the reaction between hydrogen gas and CO gas 1 mole or 28 g of CO needs 2 moles or 4 g hydrogen gas Then,6.19 grams of hydrogen gas requires 43.3 g of CO.
What is methanol ?Methanol is an organic compound called an alcohol. It can be synthesized by passing carbon monoxide gas through hydrogen gas. The balanced chemical equation of their reaction is given here.
It is clear that, 2 moles of hydrogen gas requires1 mole CO gas for complete reaction.
mass of 2 moles of hydrogen gas = 4 g
molar mass of CO = 28 g/mol
Then mass of CO gas required to react with 6.19 g of hydrogen gas is :
mass of CO = (6.19 × 28 ) / 4 = 43.3 g.
Therefore, as per the given equation, 43.3 g of CO is required to react with 6.19 g of hydrogen gas.
Find more on methanol ;
https://brainly.com/question/16866907
#SPJ1
Solubility is determined by: Select the correct answer below: O solute-solute forces O solvent-solvent forces O solute-solvent forces O all of the above
Solvent-solvent forces, solute-solvent forces, and solute-solvent forces all play a role in determining solubility. As a result, the best choice is all of the above.
How is solubility determined?A substance's solubility is the greatest amount of a solute that can dissolve in a specific amount of solvent; it is influenced by the chemical makeup of the solvent and the solute as well as by temperature and pressure.
How is a solute determined to be soluble in a solvent?Generally speaking, polar solutes dissolve best in polar solvents, and nonpolar solutes dissolve best in nonpolar solvents, which are closest in molecular structure. Additionally, solutes will be easier to dissolve if their molecules are smaller than those of the solvent.
To learn more about solubility visit:
brainly.com/question/11147728
#SPJ4
if this student combines 100 molecules of a a and 100 molecules of b b , the student obtains 100 molecules of ab a b . how many molecules of a a would this student need to make 5000 molecules of ab a b ? (assume the student had enough of molecule b b to make 5000 molecules of ab a b .)
The student combines 100 molecules of A and 100 molecules of B to make 100 molecules of AB. Therefore, to make 5000 molecules of AB, the student would need 5000/100= 50 times the amount of A, or 50 * 100 = 5000 molecules of A.
The reaction of chemicals A and B to synthesize product AB can be represented by the chemical equation A + B → AB. This means that for every molecule of A and B that react, one molecule of AB is produced. In the scenario given, the student combines 100 molecules of A and 100 molecules of B to obtain 100 molecules of AB. To make 5000 molecules of AB, the student needs to increase the amount of A accordingly. Using the ratio of the initial reaction, we can determine that 50 times the initial amount of A (100 molecules) would be required to synthesize 5000 molecules of AB. Therefore, the student would need 5000 molecules of A.
Learn more about molecules here: brainly.com/question/19922822
#SPJ4
Complete question:
A student needs to conduct a reaction that combines chemicals A and B to synthesize product AB. If we write this as a chemical equation it looks like: A +B → AB If this student combines 100 molecules of A and 100 molecules of B, the student obtains 100 molecules of AB. How many molecules of A would this student need to make 5000 molecules of AB? (Assume the student had enough of molecule B to make 5000 molecules of AB.) Express your answer as an integer
Q1)Which of the following is a chemical reaction? Freezing liquid Mercury Adding yellow to blue to make green Cutting a piece of paper into two pieces Dropping a sliced orange into a vat of Sodium Hydroxide Filling a balloon with natural air Painting a wall blue A bicycle rusting Ice cream melting Scratching a key across a desk Making a sand castle Q2) Which of the following is a physical reaction? Frying an egg Digesting carrots A Macbook falling out of a window Creating ATP in the human body Dropping a fizzy tablet into a glass of Water Shattering Glass with a baseball Corroding Metal Fireworks Exploding Lighting a match Baking a cake
Whenever the bonds between the reactant and product molecules are broken or new bonds are built and formed, a chemical reaction takes place and a new substance is created.
What seven chemical processes are there?Combustion, decomposition, neutralization, redox, precipitation or double-displacement, and synthesis are some of the numerous types of reactions that can occur depending on the product that is produced.
What are the 5 main chemical reactions?Combustion, combination, decomposition, single-replacement, and double-replacement are the five fundamental categories of chemical reactions. You can categorize a reaction by looking at the reactants and outcomes of the reaction in question.
To know more about chemical reaction visit:
https://brainly.com/question/9201475
#SPJ4
show the mechanism for the generation of the acylium ion of an acid anhydride is used instead of an acyl chloride for the source of the acylium ion
The complex's C-Cl bond breaks down to produce an acylium ion. Positively charged and resonance stabilized, the acylium ion has a carbon atom.
What processes lead to acylation?In numerous acylation processes, succinic acid is frequently utilized. Two or more succinic acid salts can combine to create a single chemical through a process known as acylation. To stop the rearrangement processes that happen during the alkylation process, the acylation procedure is performed.
Where is acylation found?It is known as N-acylation (amide linkage), S-acylation (thioester linkage), or O-acylation (ester linkage) depending on which amino acid residues (Lys, Cys, Ser/Thr) are commonly subjected to the acylation process.
To know more about succinic acid visit :-
https://brainly.com/question/24241466
#SPJ4
which of the following compounds is the stronger acid? an acid with a pka of 13.5 an acid with a pka of 13
An acid with a pKa value of 13 is the stronger acid. This is because the lower the pKa value, the stronger the acid is.
The strength of an acid is determined by its dissociation constant (Ka) or the negative logarithm of the dissociation constant (pKa). The lower the pKa value, the stronger the acid. A higher dissociation constant indicates a stronger acid, as the acid will dissociate more readily in solution and release more hydrogen ions. The dissociation constant can be used to calculate the pH of a solution, which is a measure of the concentration of hydrogen ions in the solution.
Therefore, an acid with a pKa of 13.5 is a weaker acid than an acid with a pKa of 13, as the latter has a lower pKa value. This means that the acid with a pKa of 13 will dissociate more readily in solution and release more hydrogen ions, making it the stronger acid.
To know more about acid please refer: https://brainly.com/question/14072179
#SPJ4
FILL IN THE BLANK The results of an experiment are represented in tables, charts, or graphs and its hypothesis is discussed during the ___ phase of the scientific method.
The results of an experiment are represented in tables, charts, or graphs and its hypothesis is discussed during the "analysis" phase of the scientific method.
The scientific method is a systematic approach to conducting experiments and solving problems. It is a step-by-step process that starts with a question or problem and ends with a conclusion or solution. During the analysis phase of the scientific method, the results of the experiment are analyzed and interpreted. This includes representing the results in tables, charts, or graphs to make them easier to understand. The hypothesis, which is a tentative explanation for the problem or question being studied, is also discussed during this phase. In the analysis phase, the data is evaluated to determine if the hypothesis is supported or not. If the hypothesis is supported, it is considered to be confirmed, but if it is not supported, it is considered to be falsified. The analysis phase is an important step in the scientific method because it allows the researcher to draw meaningful conclusions from the data and make decisions based on the results of the experiment.
Learn more about hypothesis here: brainly.com/question/29519577
#SPJ4
Diego did a scientific investigation to determine the additive that would form the longest-lasting bubbles. First, he combined 1 liter of water with 200 milliliters of liquid detergent to make a bubble solution. Then, he placed an equal amount of this solution into 5 separate bowls. Diego did not add anything to the first bowl. He added 20 milliliters of a different substance to each of the four remaining bowls. He added glycerin to the second bowl, lemon juice to the third bowl, sugar to the fourth bowl, and corn syrup to the fifth bowl. Diego used a bubble-blowing machine in a temperature-controlled room to make bubbles of each kind separately so that they would be formed the same way each time. He used a timer to measure how long the bubbles of each kind lasted before they burst. He repeated the experiment four times and recorded the average time that each kind of bubble lasted in the table below. Bubble Blowing Experiment Substance Added to Bubble Solution Average Length of Time Bubbles Lasted none 29 seconds glycerin 174 seconds lemon juice 89 seconds sugar 23 seconds corn syrup 41 seconds Which of the following was a constant, or a factor kept the same throughout the experiment? the ratio of water to liquid detergent used to make the bubble solution the method used to form the bubbles the kind of substance added to the bubble solution the temperature at which the bubbles were formed the method used to time how long the bubbles lasted the length of time the bubbles lasted
The constant, or factor kept the same throughout the experiment, was the method used to form the bubbles.
What is experiment?An experiment is described as a procedure carried out to support or refute a hypothesis, or determine the efficacy or likelihood of something previously untried.
Diego combined 1 liter of water with 200 milliliters of liquid detergent to make a bubble solution after which he placed an equal amount of this solution into 5 separate bowls.
Diego used a bubble-blowing machine in a temperature-controlled room to make bubbles of each kind separately.
Learn more about experiment at: https://brainly.com/question/17274244
#SPJ1
in a select answer , two atoms share electrons unequally, while in a select answer , atoms are split equally between two atoms.
In a polar covalent bond, two atoms share electrons unequally, while in a non-polar covalent bond, atoms are split equally between two atoms.
There аre two types of covаlent bonds: polаr аnd nonpolаr. In а polаr covаlent bond, the electrons аre unequаlly shаred by the аtoms becаuse they аre more аttrаcted to one nucleus thаn the other. The relаtive аttrаction of аn аtom to аn electron is known аs its electronegаtivity: аtoms thаt аre more аttrаcted to аn electron аre considered to be more electronegаtive.
Nonpolаr covаlent bonds form between two аtoms of the sаme element or between different elements thаt shаre electrons equаlly. For exаmple, moleculаr oxygen ([tex]O_{2}[/tex]) is nonpolаr becаuse the electrons will be equаlly distributed between the two oxygen аtoms. The four bonds of methаne аre аlso considered to be nonpolаr becаuse the electronegаtivies of cаrbon аnd hydrogen аre neаrly identicаl.
Your question is incomplete, but most probably your full question was
In a _____, two atoms share electrons unequally, while in a _____, atoms are split equally between two atoms.
Thus, the correct answers are polar covalent bond; non-polar covalent bond
For more information about covalent bonds refers to the link:
https://brainly.com/question/19382448
#SPJ4
how many valence electrons does the following element have? 1s22s22p63s23p63d104s24p65s24d105p4 group of answer choices 4 6 10 14
which of the following statements about catalysts is false? a catalyst is present before the reaction begins, and is also present in the same form after the reaction ends.
The statement that is false is that a catalyst cannot affect the overall energy change for the reaction.
While catalysts are present before and after a reaction, they can affect the energy change since they can provide a different reaction pathway with a lower activation energy.
Catalysts can provide a different reaction pathway with a lower activation energy, which can affect the energy change of the reaction. This means that while a catalyst is present before and after a reaction, it can still affect the energy change of the reaction.
Learn more about catalysts
https://brainly.com/question/16781912
#SPJ4
the carbon skeletons of which two amino acids enter metabolism at the level of pyruvate? choose the best answer(s) from the list below. 1- alanine and serine 2- alanine and cysteine 3- serine and asparagine 4- alanine and aspartate
The best answer 1 and 2, the carbon skeletons of which two amino acids enter metabolism at the level of pyruvate are alanine and serine or alanine and cysteine.
Metabolism refers to the chemical processes that occur within an organism to maintain life. These processes include the breakdown of nutrients to release energy and the synthesis of molecules that the body needs for growth and repair. There are two main types of metabolism: catabolism, which involves the breakdown of molecules to release energy, and anabolism, which involves the synthesis of molecules using energy.
The rate at which an individual's metabolism operates can affect their weight, with a faster metabolism generally leading to a higher rate of calorie burn and a slower metabolism leading to a lower rate of calorie burn. However, factors such as genetics, age, and sex also play a role in determining an individual's metabolism. Additionally, lifestyle factors such as diet and physical activity can also impact metabolism, with regular exercise and a balanced diet known to help boost metabolism.
To learn more about Metabolism visit here:
brainly.com/question/630824
#SPJ4
which of the following conditions would argue in favor of therapeutic drug monitoring (tdm) for a given drug?
Drugs that are given chronically, drugs that are highly protein-bound, and drugs with a narrow therapeutic window with well-defined effective and toxic concentrations are good candidates for therapeutic drug monitoring (TDM). TDM is not useful if the effective and toxic concentrations are not well-defined and there is no reference for comparison.
Therapeutic drug monitoring (TDM) is a process used to monitor the effectiveness and safety of medications. TDM is typically used for drugs that are given chronically and for drugs that are highly protein-bound. Drugs that are highly protein-bound are good candidates for TDM because changes in plasma binding proteins can affect drug levels, making it important to monitor these levels to ensure they remain in a therapeutic range. On the other hand, drugs that have low toxicity and rare side effects are unlikely to need TDM. Additionally, TDM is not useful if the effective and toxic concentrations of a drug are not well-defined as there is no reference for comparison.
Learn more about therapeutic drug monitoring here: brainly.com/question/28273924
#SPJ4
The weak acid HZ has a K, of 2.55 x 10-4. Calculate the pH of 0.045 M HZ
The pH of the the solution is the negative logarithm of its H+ ion concentration. Here, the H+ concentration is 0.00338 M. Then The pH of the solution is 2.4.
What is pH ?pH of a solution is the measure of its acidity or basicity. It measures the concentration of H+ or hydronium ion in the solution. It is the negative logarithm of the H+ ion concentration of the solution.
pH = -log [H+]
Given that, k = 2.55 × 10⁻⁴M.
[HZ] = 0.045 M.
k = [H+] [Z-]/[HZ]
Here the solution gives equal number of H+ ions and Z- ions. Hence, [H+] = [Z-]
[H+]² = [HZ] k = 0.045 M ×2.55 × 10⁻⁴M
[H+] = 0.00338 M.
pH = - log (0.00338 ) = 2.4
Therefore, the pH of the solution is 2.4.
Find more on pH:
https://brainly.com/question/17325580
#SPJ1
gaussian elimination.. for each of the following linear systems, use gaussian elimination to describe the solutions to the following systems of linear equations. in particular, determine whether each linear system has exactly one solution, infinitely many solutions, or no solutions.
The solution to the system of linear equations is x = 6, y = x / 3 - 1 = 1, z = 1, and w = 0.
To solve this system of linear equations using Gauss elimination, we first write the augmented matrix of the system:
\begin{bmatrix}
1, 2, -1, 1 &, 1 \
4 & -2 & -2 & 4 & 10 \
6 & 2 & 4 & 8 & 12 \
1 & -3 & 1 & 1 & 3 \
0 & 0 & 0 & 3 & 0
\end{bmatrix}
We can use row operations to reduce the matrix to a row echelon form, and then to a reduced row echelon form:
\begin{bmatrix}
1, 2, -1, 1, 1 \
0 & -6 & -5 & 7 & 10 \
0 & 10 & 11 & 16 & 22 \
0 & -3 & 1 & 1 & 3 \
0 & 0 & 0 & 3 & 0
\end{bmatrix}
\begin{bmatrix}
1, 2, -1, 1, 1 \
0 & -6 & -5 & 7 & 10 \
0 & 0 & 11 & 14 & 18 \
0, 0, 1,2, 3 \
0 & 0 & 0 & 3 & 0
\end{bmatrix}
\begin{bmatrix}
1, 2, -1, 1, 1 \
0 & -6 & -5 & 7 & 10 \
0 & 0 & 11 & 14 & 18 \
0 & 0 & 0 & 3 & 3 \
0, 0, 0, 0, 0
\end{bmatrix}
From the reduced row echelon form, we can solve for the variables in order, starting from the last equation:
w = 0
z = 3 / 3 = 1
y = (3 - x + y) / -3 = -1 + x / 3
x + 2(-1 + x / 3) - 1 + 0 = 1
x = 6
The solution to the system of linear equations is x = 6, y = x / 3 - 1 = 1, z = 1, and w = 0.
To know more about Gaussian elimination
brainly.com/question/29560851
The complete question is
Use Gauss elimination to solve the following systems of linear equations. If the system has infinitely
many solutions, express the solutions in terms of the parameter(s). In the case of no solution, just say so.
+ 2y – 2 + w = 1 4x – 2y – 2z + 4w = 10 6x + 2y + 4z +8w = 12 2 – 3y +3w= 0
x - 3y + 2+ w=3 6x – 2y + 2x + 2w = 2 8x – 8y + 4x + 5w = 8.
#SPJ4
The chemical para–dichlorobenzene has been used as insecticide for almost 75 years. It has the molecular formula C6H4Cl2. What is the most accurate value for the percent chlorine, by mass, in para–dichlorobenzene?
Answer:lol
Explanation:
kool
Which one of the following statements is appropriate for a band-to-band recombination process in a direct band gap semiconductor The electrons in the minimum of conduction band and the holes in the maximum of valence band need to have different momentum The electrons in the minimum of conduction band and the holes in the maximum of valence band need to have same momentum Both of these
How many unique carbons are in the following molecules (how many signatures/peaks would you expect to see in a 13C NMR spectrum)?
the following molecules Unique Carbons is : a 1 b 1 c 6 d 7 e 8 f 9.
What are distinctive carbons?Carbon atoms are special because they can join to form extraordinarily long, strong chains that can contain different-sized branches or rings and frequently have tens of thousands more carbon atoms.Similar chains can be created by silicon and just few other elements, although they tend to be much shorter and less robust.
In how many different carbons does benzene come?With chemical formula C6H6, benzoene is a significant organic chemical compound. Its molecule is made up of 6 carbon atoms arranged in a ring, with 1 hydrogen atom connected to each carbon atom.
To know more about Unique Carbons visit:
https://brainly.com/question/28848720
#SPJ4
put the four molecules in order based on increasing imf strength. water ethylene glycol ethanol diethyl ether
The four molecules in ascending strength of in order. ethanol, dichloromethane, ethyl acetate, water, and ethylene glycol
Solvents' polarity indices can be used to identify how polar they are. The capacity of the solvent to interact with various polar test solutes is measured by the polarity index.
With a polarity index of 2.8, diethyl ether is the least polar substance.
With a 3.1 polarity index, dichloromethane
4.3 on the polarity index of ethyl acetate
With a polarity index of 5.2, ethanol is the most polar substance.
These solvents' different polarity are caused by variances in their structural makeup. Because they include bonds between elements with vastly differing electronegativities, such oxygen and hydrogen, polar solvents exhibit enormous dipole moments.
Diethyl ether is less polar than dichloromethane, which has two electronegative chlorine atoms bound to a carbon atom, since it contains two non-polar methyl groups. Similarly, diethyl ether has a greater dipole moment than dichloromethane because it comprises two highly electronegative oxygen atoms bonded to carbon. Given the solvents, ethanol is the most polar because it possesses the oxygen hydrogen bond with the biggest dipole moment.
For such more question on ethylene glycol
https://brainly.com/question/13949258
#SPJ4
Note: The correct question would be as bellow,
Put the four molecules in order based on increasing imf strength
water
ethylene glycol
ethanol
diethyl ether
s the number of protons in the nucleus of an atom, which determines the chemical properties of an element and its place in the periodic table.target 1 of 6 the number of protons plus neutrons in an atom, represented as an average of all naturally occurring forms of the element, is known as blank.target 2 of 6 blank, also called micronutrients, are any chemical element required by living organisms in miniscule amounts, but cells require them to survive.target 3 of 6 blank is one of the four elements that make up 96.3% of living cells.target 4 of 6 blank is one of the seven elements that make up a small fraction, approximately 3.7%, of living cells.target 5 of 6 blank is one of the fourteen trace elements and is a component of certain digestive enzymes and other proteins.
The amount of electrons that surround the nucleus is dependent on how many protons there are, and the arrangement of such electron governs the majority of an element's chemical properties.
What affects the chemical and physical properties of an atom?An element's atomic number determines its chemical characteristics.The quantity of electrons in an atom determines bonding as well as various chemical properties.The atomic mass Z is equivalent to the amount pf electrons inside a neutral atom.
What influences an atom's chemical characteristics the most?The quantity of protons present in the nucleus affects an element's chemical characteristics.The atomic number refers to this quantity of protons.The total number of neutrons and protons in the atom's nucleus determines the mass of a atom, or its atomic mass.
To know more about electrons visit:
https://brainly.com/question/24372542
#SPJ4