The vector-valued function of a particle travelling in a straight line between the coordinates (1,-3,5) and (5,1,3) is r(t) = (1 + 4t, -3 + 4t, 5 - 2t).
According to the question
The parametric equation of a line, which is given by: may be used to find the vector-valued function of a particle traveling along a straight line.
r(t) = r₀ + tv
where,
t is a scalar parameter
v is the path's direction vector
r₀ is a point on the path's position vector.
We may utilize the two locations on the route, (1,-3,5) and (5,1,3), to determine r0 and v:
r₀ = (1,-3,5) (1,-3,5)
v = (5,1,3) - (1,-3,5) = (4,4,-2) (4,4,-2)
Thus, the path's vector-valued function is as follows:
r(t) = (1,-3,5) + t(4,4,-2)
⇒ r(t) = (1 + 4t, -3 + 4t, 5 - 2t)
This is a line's parametric equation that crosses through the points (1, -3, 5) and (5,1,3).
To know more about vector-valued functions here:
https://brainly.com/question/28592957
#SPJ4
even though you should be careful in all measurements, which will create a bigger error in the calculated volume: an error in the diameter or an error in the length of the cylinder?
Nevertheless, you should exercise caution while taking any measurements because either an inaccuracy in the cylinder's diameter or its length will result in a larger error in the volume that is predicted.
How is diameter calculated in its entirety?Instance and Formula
2r d = diameter
r = radius
Thus, the radius multiplied by the diameter gives us the diameter formula: diameter = 2. D = 2r is an abbreviated form of this equation. However, if we are acquainted with circle's other dimensions—namely, its radius, circumference, or area—calculating the circle's diameter is simple.
Our approach to handling doubts and mistakes is to reduce them while also being honest regarding them by disclosing them honestly. If your data collection approach and method were correct, justified, and all potential sources of error were covered, you would never lose points for citing a significant final uncertainty.
To know more about The diameter visit:
https://brainly.com/question/4771207
#SPJ4
Cities can reduce earthquake damage by
Answer:
Adaptation – Develop post disaster response plans and operational redundancy to speed recovery time
Avoidance – Reduce risk by structural/nonstructural retrofitting, or lease/buy more resilient properties
Assignment – Transferring the risk to others through insurance
cehgg how far does a plane fly in 15 seconds while its velocity is changing from 145 m/s to 75 m/s at a uniform rate of acceleration?
The plane will travel a distance of 2175 meters while its velocity is changing from 145 m/s to 75 m/s at a uniform rate of acceleration.
What is a change in acceleration?The rate at which velocity changes in relation to time is known as acceleration. It is a vector quantity that gauges the magnitude and direction of a change in velocity. It can be calculated as the velocity's time-dependent derivative or as the velocity change divided by the time-dependent change. The metric for acceleration is meters per second squared (m/).
The difference between two levels of acceleration, either at different times or in distinct directions, is referred to as a change in acceleration. According to mathematics, it can be described as the difference between final acceleration and initial acceleration, as shown by the equation:
Δa = a2 - a1
where "a" stands for the acceleration change, "a2" for the final acceleration, and "a1" for the starting acceleration.
distance = (initial velocity x time) + (1/2) x acceleration x
acceleration = (final velocity - initial velocity) / time
we get:
acceleration = (75 - 145) / 15 = -5 m/
Now,
distance = (145 x 15) + (1/2) x (-5) x = 2175 m
Therefore, the plane will travel a distance of 2175 meters.
To know more about acceleration, visit
brainly.com/question/460763
#SPJ4
the moon completes one orbit around the earth every 27.3 days with respect to the fixed stars. how far (in degrees) does the moon move around the earth in one day? (recall that one full orbit is 360 degrees.)
The moon moves around the earth by approximately 13.2 degrees per day.
This is because the moon completes one orbit around the earth every 27.3 days , and 360 degrees divided by 27.3 days gives us 13.2 degrees per day.
The Moon moves around Earth in an elliptical orbit, completing a full revolution around the planet every 27.322 days. This motion is caused by the force of gravity between Earth and the Moon, which is constantly pulling the Moon towards the Earth. As the Moon orbits, different parts of its surface are illuminated by the Sun, resulting in the Moon's changing phases that we observe from Earth. Additionally, as the Moon moves, it can pass in front of the Sun from Earth's perspective, causing a solar eclipse, or pass into the Earth's shadow, causing a lunar eclipse.
Learn more about orbit around the earth :
https://brainly.com/question/28106901
#SPJ4
if 5.4 j of work is needed to stretch a spring from 10 cm to 16 cm and another 9 j is needed to stretch it from 16 cm to 22 cm, what is the natural length (in cm) of the spring?
The required natural length of the spring is 0 cm.
How we get the natural length of the spring?The work done on a spring is given by the equation W = (1/2)kx^2, where W is the work done, k is the spring constant, and x is the change in length of the spring.
From the information given:we have two equations:
W1 = (1/2)k(16-10)^2 = 5.4 J
W2 = (1/2)k(22-16)^2 = 9 J
Solving for k, we can find the spring constant:
k = (2W1)/(16-10)^2 = (2 * 5.4) / (16-10)^2 = 2.7 / 36 = (2.7 / 12^2) N/m
Next, we can use the spring constant to find the natural length (the length of the spring when no force is applied) by setting x = 0 in the equation for work:
W = (1/2)kx^2 = (1/2)k * 0^2 = 0 J
So, x = (2W / k)^(1/2) = (2 * 0 / (2.7 / 12^2))^(1/2) = 0 cm
This means that the natural length of the spring is 0 cm. Note that the unit cm is not used in the calculation of the spring constant, and that the spring constant has units of N/m.
To know more about Spring constant visit:
brainly.com/question/14159361
#SPJ4
an evil supervillian has launched a rocket from his/her submarine. the rocket's height, in meters above sea level, as a function of time, , in seconds, is given by find the time it takes for the rocket to reach it's maximum height. round your answer to three decimal places. seconds. what is the maximum height? round your answer to three decimal places. meters
The height of the drone, measured in feet high, as both a time interval t, until it reaches its highest point seconds. Round your response to 3 decimal places.
How do you determine an object's maximum height when it is thrown?A ball is thrown into the air with only an initial vertical component of 32 feet a second from a height of five feet. Calculate the ball's greatest height that use the vertical modelling method, h = -16t2 + materials were prepared + s, where va is the velocity of the object in metres & s is the elevation in feet.
What is the oldest height allowed?Most women's height won't boost after the ages of 18 to 20 even with a nutritious diet. The growth rate form birth to age is depicted in the graph below.20. As can be seen, between years 18 and 20, the growth lines are zero Your bones, more specifically your growth plates, are the cause of your height plateau.
To know more about velocity visit :
https://brainly.com/question/18084516
#SPJ4
The overall global circulation of air is caused by ____ equatorial air and _____ polar air
The overall global circulation of air is caused by rising equatorial air, and sinking polar air.
What is global circulation of air?The global circulation of air can be described as the world-wide system of winds by which the necessary transport of heat from tropical to polar latitudes is accomplished.
The pattern of global circulation of air is called atmospheric circulation, and it is caused because the Sun heats the Earth more at the equator than at the poles. It's also affected by the spin of the Earth.
Thus, the overall global circulation of air is caused by rising equatorial air and sinking polar air.
Learn more about global circulation of air here: https://brainly.com/question/3505499
#SPJ1
Answer:
rising
Explanation:
PLEASE I NEED HELP!! ON THIS QUESTION I HAVE TO TURN IT IN TODAY
Answer:
Scalar quantities
temperature, eg 10 degrees Celsius ('C)
mass, eg 5 kilograms (kg)
energy, eg 2,000 joules (J)
distance, eg 19 metres (m)
speed, eg 8 metres per second (m/s)
density, eg 1,500 kilograms per metre cubed
(kg/m)
Answer:
Greetings!!
In exception for
5N down (b/c it mentioned direction)15mph North (b/c it mentioned direction)4m/s (b/c velocity is a vector quantity)9.8m/s^2 (b/c acceleration is a vector quantity)All the rest are scalar quantities.
Hope it helps!!!
when connected to a battery, a lightbulb glows brightly. if the battery is reversed and reconnected to the bulb, the bulb will glow when connected to a battery, a lightbulb glows brightly. if the battery is reversed and reconnected to the bulb, the bulb will glow brighter. dimmer. with the same brightness. not at all.
The correct option is A, When connected to a battery, a lightbulb glows brightly. if the battery is reversed and reconnected to the bulb, the bulb will glow when connected to a battery, a lightbulb glows brightly. if the battery is reversed and reconnected to the bulb, the bulb will glow brighter.
A battery is a source of electrical electricity consisting of 1 or more electrochemical cells with outside connections for powering electrical gadgets. when a battery is presenting power, its superb terminal is the cathode and its negative terminal is the anode.
The terminal marked bad is the source of electrons so as to drift through an outside electric powered circuit to the fine terminal. whilst a battery is connected to an outside electric load, a redox reaction converts excessive-electricity reactants to lower-strength products, and the loose-electricity distinction is introduced to the outside circuit as electrical strength.
Traditionally the term "battery" mainly referred to a tool composed of more than one cells; however, the usage has advanced to encompass gadgets composed of a unmarried mobile.
To learn more about Battery visit here:
brainly.com/question/3458926
#SPJ4
if the tape timer creates dots at a rate of 35 hz, what time interval in seconds does 3 successive dots represent? g
The frequency of dot production in this instance is 28 Hz since the tape timer produces 28 dots per second.
How long would it take for the sun's light to travel from space to Earth's surface—150 seconds?Light moves at a speed of 186,287 miles per second, or 299,792 kilometers per second. 1 Astronomical Unit, or the time it takes for light to journey from the Sun to Earth, is 499.0 seconds.
A second is how many?The 3rd (symbol: s) is the time unit used in the International Systems of Units (SI). It has historically been defined as 186400 of a day; this number came from the division of a day into 24 hours, 60 minutes, and then 60 seconds.
To know more about frequency visit :
https://brainly.com/question/22548127
#SPJ4
a satellite is placed in an orbit with a radius that is half the radius of the moon's orbit. find its period in units of the period of the moon.
The period of a satellite in an orbit around the Earth with a radius half that of the moon's orbit is 0.35 TM. Thus, Option A is correct.
Based on the answer, we understand that it takes 0.35 times the amount of time for the satellite to complete one full orbit as it takes for the moon to complete one orbit around the Earth.
To explain, the period of a satellite in orbit around the Earth is directly proportional to the square root of the semi-major axis of its orbit. Since the semi-major axis of the satellite's orbit is half that of the moon's orbit, the square root of this value will also be half the square root of the moon's orbit, resulting in a period that is 0.35 times that of the moon's orbit.
Kepler's third law states that the square of the orbital period of a planet or satellite is proportional to the cube of the semi-major axis of its orbit, so a satellite with a smaller semi-major axis will have a shorter period.
The following options should be provided along with the question:
A. 0.35 TMB. 0.125 TMC. 0.5 TMD. 0.63 TMLearn more about moon's orbit brainly.com/question/29646576
#SPJ4
what is the length of a pendulum whose period on the moon matches the period of a 1.4- m -long pendulum on the earth?
Length of a pendulum whose period on the Moon matches the period of a 1.4 m pendulum on the Earth is approximately 0.23 m.
What is period of pendulum?The time taken by the pendulum to finish one full oscillation is called time period of a simple pendulum.
The period of a pendulum is : T = 2π√(l/g), where T is period, l is length of the pendulum, and g is acceleration due to gravity. On the Moon, acceleration due to gravity is approximately 1/6 of that on the Earth, or g_moon = 1.62 m/s².
Let length of pendulum on the Moon be l_moon. Period of the pendulum on the Moon is T_moon = 2π√(l_moon/g_moon). Setting T_moon equal to the period of the 1.4 m pendulum on the Earth, T_earth = 2π√(1.4 m / 9.8 m/s²), we can find the length of the pendulum on the Moon:
T_moon = T_earth
2π√(l_moon / 1.62 m/s²) = 2π√(1.4 m / 9.8 m/s²)
Solving for l_moon, we find:
l_moon = (1.4 m) * (1.62 m/s²) / (9.8 m/s²) = 0.23 m
So the length of a pendulum whose period on the Moon matches the period of a 1.4 m pendulum on the Earth is approximately 0.23 m.
To know more about period of pendulum, refer
https://brainly.com/question/26524032
#SPJ4
suppose a clay model of a koala bear has a mass of 0.190 kg and slides on ice at a speed of 0.610 m/s. it runs into another clay model, which is initially motionless and has a mass of 0.310 kg. both being soft clay, they naturally stick together. what is their final velocity?
The final velocity of the two clay models after they stick together is 0.545 m/s.
The final velocity of the two clay models after they stick together can be calculated using the conservation of momentum principle, which states that the total momentum of an isolated system remains constant if no external forces act on it. The initial momentum of the system is the momentum of the first clay model and the final momentum is the momentum of the two clay models combined.
The momentum of each clay model can be calculated using the formula:
p = m * v,
where p is momentum, m is mass, and v is velocity.
The initial momentum of the first clay model:
p1 = m1 * v1 = 0.190 kg * 0.610 m/s = 0.116 kg * m/s
Final momentum of the combined clay models:
p_final = (m1 + m2) * v_final = (0.190 kg + 0.310 kg) * v_final
Equating the initial momentum to the final momentum and solving for v_final:
v_final = p1 / (m1 + m2) = 0.116 kg * m/s / (0.190 kg + 0.310 kg) = 0.545 m/s
So the final velocity of the two clay models after they stick together is 0.545 m/s.
Learn more about velocity here: https://brainly.com/question/25749514
#SPJ4
why is a specimen smaller than 200 nm not visible with a light microscope? why is a specimen smaller than 200 nm not visible with a light microscope? it is too easy to lose on the stage. the lenses only go to 100 x magnification power. anything smaller than 200 nm cannot interact with visible light. visible light is only good at wavelengths below 390 nm. request answer
Visible light is insensitive to objects smaller than 200 nm. On stage, defeat is all too often. Only wavelengths below 390 nm are suitable for visible light.
Why can't a light microscope see a specimen that is smaller than 20 nm?Because visible light, which the microscope uses, has a specific range of wavelengths, A smaller item than the wavelength of the light cannot be imaged by the microscope.
Why is a light microscope only capable of 200 nm of resolution?It was believed throughout the majority of the 20th century that far-field light microscopy could not resolve things closer than 150–200 nanometers (see Milestone 3). Light diffracts when it travels through various media,
To know more about Visible light visit:-
https://brainly.com/question/14828465
#SPJ4
an egg is thrown nearly vertically upward from a point near the cornice of a tall building. the egg just misses the cornice on the way down and passes a point 30.0 m below its starting point 5.00 s after it leaves the thrower's hand. ignore air resistance. what is the initial speed of the egg?
The initial speed of the egg is calculated to be approximately 29.6 m/s.
What is speed?Rate of change of position of any object in any direction is called speed.
We use following kinematic equation to find initial velocity of the egg:
h = vi * t + (1/2) * g * t²,
where h is initial height of the egg, vi is initial velocity, t is time elapsed, and g is acceleration due to gravity (9.8 m/s²).
So, h = vi * t + (1/2) * g * t²
30.0 m = vi * 5.00 s + (1/2) * 9.8 m/s² * 5.00 s²
vi = 2 * (30.0 m - (1/2) * 9.8 m/s² * 5.00 s²) / 5.00 s = 29.6 m/s
So, the initial speed of the egg is approximately 29.6 m/s.
To know more about speed, refer
https://brainly.com/question/13943409
#SPJ4
Whenever the net force on an object is zero, its acceleration _____.
(a) and velocity are the same
(b) is zero
(c) may be zero
(d) None of the above.
Why do we find it more difficult to recognize inverted faces than other inverted objects?
Because The FFA responds to upright faces more than inverted faces, indicating that inverted faces are not perceived in the same way that upright faces are.
Are people better at Recognising upright or inverted faces?According to the face(UI) effect, perception and recognition are better for upright (U) faces than for inverted ones (I). According to the face/object(UI) effect, inversion inhibits face processing more than nonfacial object processing (e.g., buildings or cars).The fusiform face area (FFA) is a brain region situated in the fusiform gyrus with an unknown function. Some experts suggest that the FFA evolved to aid with face perception. Others believe the FFA can distinguish between any familiar stimuli.
To know more about upright faces visit:
https://brainly.com/question/14544248
#SPJ4
if mary points her boat due north, how far from her intended landing spot will she be when she reaches the opposite shore?
If Mary points her boat north, the distance Mary will reach the other shore is 70.59 m.
The time required is,
t = 190 m/3.5 m/s
t = 54.3 seconds
Mary's time will also be displaced in the east.
x = (1.3 m/s) (54.3 s)
x = 70.59 m
Your question is incomplete but most probably your full question was:
Mary needs to row her boat across a 190 m-wide river that is flowing to the east at a speed of 1.3 m/s. Mary can row at a speed of 3.5 m/s. part an if Mary points her boat due north, how far from her intended landing spot will she be when she reaches the opposite shore?
Learn more about calculating the distance at https://brainly.com/question/26046491
#SPJ1
A device that automatically writes down (records) changes in temp is called?
A thermograph is a gadget that automatically logs (records) temperature changes.
What is the thermograph used for?By identifying heat leaks, thermography is able to identify inadequate thermal insulation and boost the effectiveness of heating and cooling systems. Air leaks in windows and doorframes can also be discovered during a building envelope assessment.
What exactly is a thermograph device?An automatic temperature recorder. The thermometric component is typically either a liquid-filled Bourdon tube or a bimetal strip. The bimetal element in the first scenario is shaped like a helical coil, with one end fixed firmly to the device and the other to recorder pen.
To know more about Thermograph Device visit:
https://brainly.com/question/15300315
#SPJ4
how many extra electrons are on this particular oil drop (given the presently known charge of the electron)? select all that app
Extra electrons are on this particular oil drop is 4.
qE=mg⇒q×1.68×10^5 =1.08×10^−14 g⇒q=6.40×10 ^−19C
q=ne⇒6.4×10 ^−19 =n×1.6×10 ^−19 ⇒n=4
Definition of ElectronElectrons are part of an atom, which can be defined as the particles that make up the atom, which have a negative charge and surround the positively charged nucleus of the atom.
It is because of the presence of electrons that an elemental atom has a neutral charge.
History of the ElectronElectrons were first discovered after the discovery of the cathode tube which emitted a weak green light.
The scientist who first discovered the electron was J.J. Thompson who also put forward the theory of the atomic model.
Light treasury can occur due to a large enough electric potential that is given to the two wires as part of the cathode tube.
The cathode rays are thought to be J.J. Thompson as a particle because it can rotate the propeller that is between the cathode and anode.
The cathode rays were then referred to as part of the constituent atoms we know today as electrons.
Learn more about electron at
https://brainly.com/question/1255220
#SPJ4
the abs system prevents the wheels from locking or skidding, no matter how hard the brakes are applied or how slippery the road surface. group of answer choices true false
It is true that the Anti-Lock Braking System (ABS) helps prevent the wheels from locking or skidding when the brakes are applied, even on slippery road surfaces.
What is friction?Friction is the force that prevents solid surfaces, fluid layers, and material components from sliding against each other. There are several kinds of friction: Dry friction is the force that opposes the relative lateral motion of two in touch solid surfaces. Friction is the force that prevents one solid item from slipping or rolling over another. Frictional forces, such as the traction required to walk without slipping, are advantageous, but they also create a significant amount of resistance to motion. We can manage automobiles because of friction between the tires and the road: more precisely, because there are three types of friction: rolling friction, beginning friction, and sliding friction.
Here,
ABS maintains tire traction and steerability by swiftly applying and releasing the brakes, which enhances braking performance and assists the driver in maintaining vehicle control.
To know more about friction,
https://brainly.com/question/13000653
#SPJ4
If a car is moving to the left with constant velocity, one can conclude that? a. there must be no forces applied to the car. b. the net force applied to the car is directed to the left. c. the net force applied to the car is zero. d. there is exactly one force applied to the car.
When an object moves at a constant speed, it indicates that there is no net force acting on it. This results in a condition of balanced forces since all of the forces operating on the item added together equal zero.
The total force exerted on an item is known as the net force. It is the total force operating on an item in both magnitude and direction. According to Newton's second law, F = ma, the net force determines an object's acceleration, which is proportional to the net force and inversely proportional to the object's mass. An object will maintain its velocity and continue to move in a straight path at a constant speed if there is no net force acting on it. If the net force is not zero, the item will accelerate in that direction. In this scenario, the object's velocity will be altered by the net force, which could result in an increase or decrease in speed
Learn more about net force here:
https://brainly.com/question/18109210
#SPJ4
true or false: equipotential surfaces of 50 v, 40 v, 30 v, 20 v and 10 v near a single, positive point charge are equally spaced in the radial direction.
The statement is true, equipotential surfaces of 50 v, 40 v, 30 v, 20 v and 10 v near a single, positive point charge are equally spaced in the radial direction.
The surface in an electric field where the value of electric potential is the same at all the points on the surface is called equipotential surface. The potential difference between two points in an equipotential surface is zero.
Thus, work done in moving the charge from one point to another in an equipotential surface is zero. since the work is done is zero when the direction of force (electric field) and displacement is normal.
To know more about the equipotential surface, here
brainly.com/question/14908372
#SPJ4
a car has wheels with a 8 inch radius. if each wheel's rate of turn is 6 revolutions per second, how fast is the car moving in units of inches/sec?
A automobile has 8 inch-radius wheels. If each wheel rotates at the rate of 6 revolutions per second, the car is moving at a speed of 301.71 inches per second.
What exactly does speed mean?the definition of speed. a direction or speed at which an object's location changes. The distance traveled relative to the time it took to travel that distance is how fast something is moving. Due to its lack of magnitude and merely having a direction, speed is indeed a scalar number.
Which of these is the first speed rule?Newton's first law states that a body will continue to move until it is acted on by an external power if it is at rest or moving in a specific direction at a fairly constant pace.
To know more about speed visit:
https://brainly.com/question/13074982
#SPJ4
Scientists and engineers are testing three different satellites orbiting Earth. The scientists are able to use sensors to determine the gravitational force experienced by each satellite. Some of the data from each of the orbiting satellites is shown in the table below. Distance Satellite from Earth (km) 36,000 36,000 36.000 X Y Z Mass (kg) 400 1.200 900 Gravitational Force (N) 120 360 270 Which statement best summarizes the information given? OA. The gravitational force exerted by Earth on the satellite depends on the satellite's mass. OB. The satellite with the least amount of mass is able to exert greater gravitational force on Earth than the others. OC. The gravitational force exerted by Earth changes the mass of each of the satellites. OD. The gravitational force on the satellite depends only on the distance from Earth at which it is travelling.
The statement that best summarizes the information given is: The gravitational force exerted by Earth on the satellite depends on the satellite's mass.
The correct option is A.
What is the relationship between gravitational force and mass?Gravitational force is the force of attraction that exists between two objects.
Gravitational force is directly proportional to the product of the masses of the objects and inversely proportional to the square of the distance of separation.
Greater gravitational forces will be used to attract heavier things since the gravitational force is directly proportional to the mass of both interacting objects. Therefore, the gravitational attraction between two objects grows as their respective masses do as well.
Learn more about gravitational force at: https://brainly.com/question/24783651
#SPJ1
a figure skater on ice spins on one foot. she pulls in her arms and her rotational speed increases.
As her arms close in, her angular speed rises as a result of an increase in potential energy. 2. Her moment of inertia drops while her angular momentum increases, causing her angular speed to rise.
What is speed?The speed at which an object's location changes in any direction. The distance travelled in relation to the time it took to travel that distance is how speed is defined. The most often used unit of speed in daily life is the kilometre per hour (km/h), or miles per hour in the US and the UK. The SI's unit of speed is indeed the metre per second (m/s) (mph).
What is speed and velocity?Velocity is the pace and direction of an object's movement, whereas speed is the time rate at which an object is travelling along a path. In other words, velocity is a vector, whereas speed is a scalar value. speedometer, a tool that displays a car's speed in conjunction with
To know more about Speed visit:
https://brainly.com/question/14982706
#SPJ4
In what ways does a 30 meter telescope outperform a 10 meter telescope?
As said, its pictures are nine times brighter compared to those of a ten meters.
Simple explanation of how a telescope functions?Through a big aperture, considerably larger than human eyes, telescopes gather the same or more light as they can. We may see items alongside them that are undetectable to the unaided eye because they catch so much light.
What are a telescope's primary purposes?The two most crucial tasks of a camera are to gather the weak light coming from an astronomy source and to concentrate all of the radiation into a single point or picture. The majority of astronomical objects of interest are quite dim; the more illumination we can gather, the better we can examine such objects.
To know more about Telescope visit:
https://brainly.com/question/28849808
#SPJ4
a block of wood has a mass of 6.0 g and a volume of 12.0 cm3. what is the density of the block of wood?
Answer:
The density of the block of wood can be calculated by dividing its mass by its volume.
Density = Mass/Volume
Mass = 6.0 g
Volume = 12.0 cm3 = 0.012 liters
Density = 6.0 g / 0.012 L = 500 kg/m^3
Therefore, the density of the block of wood is 500 kg/m^3.
a small object is released from rest and fall 1.00 x 10^2 feet near the surface of the earth neglect air resistance how long will it take to fall through
It will take 2.49sec to fall through the 1.00 × 10² feet mentioned.
What occurs if air resistance is disregarded?When objects are stated to be falling freely, they are only being pulled downward by gravity and do not experience much air resistance. Under these conditions, all objects will fall with the same rate of acceleration, regardless of their mass.
A thing falls freely due to gravity.
The distance traveled when free falling is measured in height.
H= Hο −1/2gt
. were Hο is the initial height g is the acceleration due the gravity t is the time
Accepting the final height equal to zero
Hο =1/2gt²
t = √2Hο /g
= 32.17
2 ⁄
t = √2∗1.00∗10²/32.17
= 2.49 sec
To know more about earth neglect air visit:-
https://brainly.com/question/26677603
#SPJ4
Question:
A small object is released from rest and falls 1.00 × 102 feet near the surface of the earth. Neglect air resistance.
How long will it take to fall through the 1.00 × 102 feet mentioned?
3.12 s
4.50 s
2.49 s
6.25 s
10.0 s
Use the information below to answer question 9.
Since a Cessna-172 is a small airplane (750 kg) it may be easily blown
off course by a strong cross wind.
9.
An airplane is travelling at 27.8 m/s due north in calm air when
an east wind of 11.2 m/s begins. This blows the airplane off
course as shown in the diagram. Determine the plane's
momentum relative to the ground as it is being blown off
course. [2.25 x 104 kg m/s, 21.9° W of N]
P= mv
beg
3m
1.2m
direction
of travel
N
T
wind
direction
heading
2+
The momentum of the airplane is 2.24 * 10^4 Kgm/s
What is the momentum?Momentum is a concept in physics that describes the motion of an object. It is a vector quantity, meaning it has both magnitude and direction. The momentum of an object is equal to its mass multiplied by its velocity. In simple terms, momentum is a measure of how much "motion" an object has, taking into account both its mass and speed.
We would have to find the resultant of the velocity from
R = √(27.8)^2 + (11.2)^2
R = 29.97 m/s
We know that the momentum is mv
Momentum = 29.97 m/s * 750 kg
= 2.24 * 10^4 Kgm/s
Learn more about the momentum:https://brainly.com/question/24030570
#SPJ1