The density of a nugget of gold which occupies 5.64 ml of water and weighs 108.85 g is 19.29 g/cm^3.
The density of a gold nugget can be calculated by using the following formula:
Density of nugget = Mass of gold nugget/Volume occupied by gold nugget
Here,
the mass of gold is given to be 108.85 grams and the volume occupied by gold is given to be 5.64 ml or 5.64 cm^3.
Putting these values in the above equation
Density = 108.85 g / 5.64 cm^3
Density = 19.29 g/cm^3
Thus, the density of a nugget of gold which occupies 5.64 ml of water and weighs 108.85 g is 19.29 g/cm^3.
To know more about "gold", refer to the following link:
https://brainly.com/question/14669985?referrer=searchResults
#SPJ1
what distance in miles can you drive in your new Prius hybrid, if your car gets 56 miles per gallon and you have 15.5 gallons of gas?
Taking into account the rule of three, you can drive your new Prius hybrid a distance of 868 miles.
Rule of threeRule of three is a way of solving problems of proportionality between three known values and an unknown value, establishing a relationship of proportionality between all of them.
If the relationship between the magnitudes is direct, the direct rule of three must be applied as follow, being a, b and c known data and x the variable to be calculated:
a ⇒ b
c ⇒ x
So: x= (c×b) ÷a
Distance in miles in this caseIn this case, you can apply the following rule of three: If the car for 1 gallon of gasoline gets 56 miles, for 15.5 gallons of gasoline it gets how many miles?
1 gallon ⇒ 56 miles
15.5 gallons ⇒ x
So: x= (15.5 gallons ×56 miles) ÷1 gallon
Solving:
x= 868 miles
In summary, you can drive your new Prius hybrid a distance of 868 miles.
Learn more with this example:
brainly.com/question/12482948
#SPJ1
A 0.100 g sample of a carboxylic acid is burned in oxygen, producing 0.178 g of CO2 and 0.0734 g of H2O. Determine the empirical formula of the carboxylic acid.
The empirical formula of the carboxylic acid is C₃H₆O₂.
For determination of the empirical formula of the carboxylic acid.
As you know, one mole of water, contains 2 moles of hydrogen. This means that the percent composition of hydrogen in water will be
2× 1.00794 g/mol / 18.015 g/mol × 100 = 11.19% H
What this means is that every 100 g of water will contain 11.19 g of hydrogen. In your case, the 0.2349-g sample of water will contain
0.2349 g water⋅ 11.19 g H / 100 g water = 0.026285 g H
Similarly, one mole of carbon dioxide, CO₂, contains one mole of carbon. The percent composition of carbon in carbon dioxide will be
1 ×12.011 g/mol / 44.01 g/mol × 100 = 27.29% C
Once again, this tells you that every 100 g of carbon dioxide will contain
27.29 g of carbon. In your case, you will have
0.5706g H₂O ⋅ 27.29 g C /100g H₂O = 0.15572 g C
The mass of carbon + hydrogen originally present in the carboxylic acid sample will be
m C + H = 0.026285 g + 0.15572 g =0.18201 g
The initial mass of the sample was equal to 0.3200 g. This tells you that the sample also contains oxygen
m oxygen = 0.3200 g −0.18201 g = 0.13799 g O
So, now that you know how many grams of each element were present in the initial sample, use their molar masses to convert these to moles
For C: 0.15572g /12.011g/mol = 0.012965 moles C
For H: 0.026285 g/1.00794g/mol = 0.026078 moles H
For O: 0.13799g/15.9994g/ mol = 0.0086247 moles O
Now, to get the compound's empirical formula, you need to find the smallest whole number ratio that exists between the number of moles of each element in the compound.
To do that, divide these values by the smallest one to get
For C: 0.012965 moles / 0.0086247 moles = 1.5032 ≈ 1.5
For H: 0.026078moles /0.0086247 moles =3.0236≈ 3
For O: 0.0086247moles /0.0086247 moles = 1
This means that you have
C₁.₅H₃O₁
Since you're looking for the smallest whole number ratio that exists between the elements, multiply each subscript by 2 to get
C₁.₅H₃O₁ * 2 = C₃H₆O₂
To learn more about empirical formula visit the link:
https://brainly.com/question/14044066?referrer=searchResults
#SPJ1
A chemist records the amount of liquid dispensed by a machine and obtains the following values: 283.2 mL, 284.1 mL, 283.9 mL, 284.0 mL, 284.1 mL. The machine is supposed to dispense 296 mL of liquid. Which of the following describes the accuracy and precision of the machine?
precise but not accurate
accurate but not precise
neither accurate nor precise
accurate and precise
The machine is accurate and precise
Hence , option D is correct one .
Accuracy is the capacity of an instrument to measure the precise value. In other words, it refers to how closely the measured value resembles a reference or genuine value. Small readings can be taken to increase accuracy. The calculation's inaccuracy is decreased by the little reading.
The precision of a substance is defined as the degree to which two or more measurements agree with one another. It is incredibly precise but not always accurate to measure something if you weigh it five times and get 3.2 kg each time. Accuracy is not necessary for precision.
learn about precise ,
https://brainly.com/question/15926220
#SPJ1
why is unauthorized modification of car is dangerous?
Answer:
It is dangerous because it can be harder to drive the car.
Explanation:
Any alterations in your car can void some of your warranties and may also pose some safety concerns. It is also illegal as well.
Maalox is the trade name for an antacid and antigas medication used for relief of heartburn, bloating, and acid indigestion. Each 4−mL portion of Maalox contains 320 mg of aluminum hydroxide, 320 mg of magnesium hydroxide, and 32 mg of simethicone. If the recommended dose is two teaspoons four times a day, how many grams of each substance would an individual take in a 12−hour period. (1 teaspoon = 5 mL.)
Maalox is the trade name for an antacid and antigas medication used for relief of heartburn, bloating, and acid indigestion in which
4 ml contains
= 320mg of aluminum hydroxide
= 320mg of magnesium hydroxide
= 32mg of simethicone
recommended doses = 4 times * 2 tea spoon = 8 tea spoon/ day
given = 1 tea spoon = 5 ml
8 tea spoon = 40 ml
hence,
amount of aluminum hydroxide = 320/4 * 40 = 3200mg = 3.2 g
amount of magnesium hydroxide = 320/4 * 40 = 3.2 g
amount of simethicone = 32/4 * 40 = 320 mg = 0.32g
To know more about antacid visit :
https://brainly.com/question/1328376
#SPJ9
HELPPP
Ferric chloride combines with water in a reversible reaction to produce ferric hydroxide and hydrochloric acid as shown.
FeCl3 + 3H₂0 Fe(OH)3 + 3HCI
Which reaction must occur at the same time as the formation of ferric hydroxide?
(1 point)
O Fe(OH)3 + 3HCI → FeCl3 + 3H₂O
O FeCl3 + 3HCI → Fe(OH)3 +3H₂O
O FeCl3 Fe + 3Cl
O 2H₂O → H₂ + O₂
The reaction that will occur at the same time as the formation of ferric hydroxide will be [tex]Fe(OH)_3 + 3HCI --- > FeCl_3 + 3H_2O[/tex].
What is a reversible reaction?A reversible reaction is a reaction that proceeds both forward and backward at the same time.
In other words, it is a reaction in which as the reactants react to form products, the products simultaneously react to form reactants.
Thus, looking at the original forward reaction:
[tex]FeCl_3 + 3H_2O --- > Fe(OH)_3 + 3HCI[/tex]
Ferric chloride reacts with water to form ferric hydroxide and hydrochloric acid. Since the reaction is reversible, the ferric hydroxide and hydrochloric acid formed will simultaneously be reacting to form the reactants.
In other words, the reaction that will occur at the same time as the formation of ferric hydroxide will be:
[tex]Fe(OH)_3 + 3HCI --- > FeCl_3 + 3H_2O[/tex]
More on reversible reactions can be found here: https://brainly.com/question/16614705
#SPJ1
How many moles are present in each of the following at STP?
A.54.5 dm3 CH4
B.250.0 cm3 CO
1. The number of mole of 54.5 dm³ of CH₄ at STP is 2.43 moles of CH₄
2. The number of mole of 250 cm³ of CO at STP is 0.01 mole
Volume of gas at STPAt standard temperature and pressure (STP),
1 mole of gas = 22.4 dm³ = 22400 cm³
1. How to determine the mole of 54.5 dm³ of CH₄At standard temperature and pressure (STP),
22.4 dm³ = 1 mole of CH₄
Therefore,
54.5 dm³ = (54.5 dm³ × 1 mole) / 22.4 dm³
54.5 dm³ = 2.43 moles of CH₄
2. How to determine the mole of 250 cm³ of COAt standard temperature and pressure STP,
22400 cm³ = 1 mole of CO
Therefore,
250 cm³ = (250 cm³ × 1 mole) / 22400 cm³
250 cm³ =0.01 mole of CO
Learn more about volume of gas at STP:
https://brainly.com/question/15305237
#SPJ1
For any large collection of randomly selected chlorine atoms:
a. what is the average atomic mass of chlorine in amu?
An atomic mass unit is defined as 1/12 th of the mass of carbon-12 atom.
The mass of an atom is mainly due to its protons and neutrons in the nucleus.
Weight of a proton is 1.6 x 10^-27 kg
Weight of a neutron is 1.6 x 10^-27kg
However weight of an electron is 9 x 10^-31kg and hence is negligible in calculation of amu
A chlorine atom has 17 protons in its nucleus and 18 neutrons in its nucleus
Its atomic number is 17
Amu weight of Cl= weight of protons+ weight of neutrons
=17+18
=35amu
Hence the average atomic mass unit of chlorine atoms will be 35 amu
Disclaimer:
The value is taken for easier calculation and is not accurate upto 3 decimals
For further reference:
https://brainly.com/question/13668134?referrer=searchResults
#SPJ9
Can you please help me
Answer: false
Explanation: A model is a representation of a more complex system
Name the material sent into slave by a supernova
PLS HELP ME WITH MY CHEMISTRY
Answer:
Explanation:density=mass×volume
so your answer will be 14.7×6.6=97.02
The same type of engine is placed in two different airplanes. The first airplane is twice as heavy as the second airplane
Which statement is correct about the mass of the airplane and its acceleration, assuming a constant net force? (1 point)
O Increasing the acceleration of the airplane causes the engine to provide more force.
O Decreasing the mass of the airplane will result in the airplane accelerating less.
O Increasing the acceleration of the airplane causes the engine to provide less force.
O Decreasing the mass of the airplane will result in the airplane accelerating more.
If the engines in both airplanes are at the same weight, the engines in both airplanes would still have the same mass because mass is constant everywhere.
What is mass?Mass can be experimentally defined as a measure of the body's inertia, meaning the resistance to acceleration (change of velocity) when a net force is applied.
In the question, the same type of engine is placed in two different air-planes of which the first airplane is twice as heavy as the second.
We can then conclude that the correct statement about the mass of the airplane and its acceleration, assuming a constant net force is that Increasing the acceleration of the air-plane causes the engine to provide more force.
Learn more about acceleration at:
brainly.com/question/12550364
#SPJ1
convert 1295 cm2 to m2
Answer:
0.1295 m^2
Explanation:
just divide 1295 by 10000
Rather than saying the electrons transition
between energy levels to produce the colors in fireworks, how might
mechanical model? What does this tell you about the energies of the
you refine this description using your new knowledge of the quantum
orbitals?
When the electrons get excited it move from lower level to higher energy level and gain energy but when electrons pumped back to there lower energy level the excess energy get emitted as light.
What is electron transition?Electron transition can be defined as when an atoms or molecules absorbs radiation there electron get excited and jump from lower energy level to higher energy level and when an atom or molecule emit radiations energy it come back to its original place i.e. to the lower energy state.
Electron transition is based on Franck-Codon principle.
According to this principle electron transition occur without changes in position of there nuclei in the molecular entity and its environment.
Thus, when the electrons get excited it move from lower level to higher energy level and gain energy but when electrons pumped back to there lower energy level the excess energy get emitted as light.
To learn more about electron transition, refer to the link below:
https://brainly.com/question/10260587
#SPJ1
A spherical iron ball has a
diameter of 11.6 cm and has a
mass of 3.60 kilograms. This
particular ball has a hole inside
of it. Given that the density of
iron metal is 7.86 g/cm*, what is
the volume in cm" of the hole
inside the ball? (The volume of
a sphere is (4/3) Tr3)
The volume of the hole inside the ball is 359.27 cubic inches if the spherical iron ball has a diameter of 11.6 cm and a mass of 3.60 kilograms.
What is a sphere?It is defined as three-dimensional geometry when half-circle two-dimensional geometry is revolved around the diameter of the sphere that will form.
[tex]\rm V = \dfrac{4}{3} \pi r^3[/tex]
The volume of the sphere V = (4/3)πr³
The diameter d = 11.6 cm
The radius r = 11.6/2 = 5.8 cm
The volume of the sphere V = (4/3)π(5.8)³
V = 817.28 cubic cm
As we know,
The density d = mass/volume
7.86 = 3600/volume
Volume = 458.01 cubic cm
The volume of the hole inside the ball = 817.28 - 458.01
= 359.27 cubic inches
Thus, the volume of the hole inside the ball is 359.27 cubic inches if the spherical iron ball has a diameter of 11.6 cm and a mass of 3.60 kilograms.
Learn more about the sphere here:
brainly.com/question/11374994
#SPJ2
Why is isopropyl alcohol a pure substance?
Answer:
A substance is considered a chemically pure substance when it has a fixed chemical composition throughout, and uniform physical and chemical properties. Because isopropyl alcohol ( C3H8O ) Is a homogenous compound with constant physical and chemical properties, as well as a uniform chemical structure, isopropyl alcohol is definitely fit to be considered a pure substance.
how many moles of CaCo3 are there in an antacid tablet containing 0.512g CaCo3
The number of mole of CaCO₃ in antacid tablet containing 0.512 g of CaCO₃ is 5.12×10⁻³ mole
Description of moleThe mole of a substance is related to it's mass and molar mass according to the following equation:
Mole = mass / molar mass
How to determine the mole of CaCO₃From the question given above, the following data were obtained:
Mass of CaCO₃ = 0.512 gMolar mass of CaCO₃ = 40 + 12 + (3 × 16) = 40 + 12 + 48 = 100 g/mol Mole of CaCO₃ =?The number of mole in 0.512 g of CaCO₃ can be obtained as follow:
Mole = mass / molar mass
Mole of CaCO₃ = 0.512 / 100
Mole of CaCO₃ = 5.12×10⁻³ mole
Thus, 5.12×10⁻³ mole of CaCO₃ is present in the antacid tablet
Learn more about mole:
https://brainly.com/question/13314627
#SPJ1
A liquid solvent is added to a flask containing an insoluble solid. The total volume of the solid and liquid together is 90.0 mL. The liquid solvent has a mass of 47.3 g and a density of 0.865 g/mL. Determine the mass of the solid given its density is 3.25 g/mL.
The mass of the solid will be 114.7 g.
Density problemThe density of a substance is given as the ratio of its mass and its volume.
Also, a solid will always displace its own volume in a liquid.
Mass of liquid solvent = 47.3 g
Density of liquid solvent = 0.865 g/mL
Recall that: density = mass/volume
Volume of liquid solvent = mass/density
= 47.3/0.865
= 54.7 mL
Volume of solid + liquid solvent = 90.0 mL
Volume of solid = 90.0 - volume of liquid solvent
= 90.0 - 54.7
= 35.3 mL
Density of solid = 3.25 g/mL
Mass of solid = density x volume
= 3.25 x 35.3
= 114.7 g
The mass of the solid is 114.7 g.
More on density can be found here: https://brainly.com/question/15164682
#SPJ1
Which molecule is more polar, RCH2COCH2R or RCH2(OH)R?
The answer would be RCH2COCH2R is more polar than RCH2(OH)R
The formic acid ( RCH2COCH2R ) is more polar than Pyridinium Chlorochromate (PCC) (RCH2(OH)R) because formic acid is from aldehyde group and is a reagent from a carbonyl group and PCC is react to form carbonyl group it's also an reagent which reacts in oxidation of alcohols.
The polarity is more which is a carbonyl compound as their electrons are loosely prepared. And also the polarity of formic acid is 6.0.
Hence, the formic acid (RCH2COCH2R) is more polar than Pyridinium Chlorochromate (RCH2(OH)R) (PCC).
To know more about Polarity here :
https://brainly.com/question/3184550?referrer=searchResults
#SPJ1
How does the curing basically take place?
Explanation:
The first involves keeping the surface of the concrete moist by the use ponding, spraying/sprinkling, damp sand or damp hessian.
The second prevents the loss of moisture from the concrete by covering it with polythene sheeting or leaving the formwork in place.
The third involves the use of spray or roller applied curing compounds.
calculate denisty in grans per milliliter 25.0 mL having a mass of 19.7 g
Solve the following problem:
How many seconds are in 3 years?
Please show your work. You will need to include the following conversion factors:
• 365 days/1 yr or 1 yr/365 days
1 day/24 hours or 24 hours/1 day
.60 min/1 hour or 1 hour/60 min
. 1 min/60 sec or 60 sec/1 min
Answer: 94,608,000 seconds
Explanation:
365 days/1 yr=365
24 hours/1 day=24
60 min/1 hour=60
60 sec/1 min=60
365*24*60*60=
8760*3600=31536000 seconds in 1 year.
31536000*3=94608000 seconds
It cost $35.57 to drive the school bus for 94.00 miles.
Given:
Distance to drive (D) = 94.00 miles
Miles per gallon (MPG) = 6.500 miles/gallon
Cost of gas (C) = $2.459/gallon
Step 1: Calculate the amount of gas required for the trip.
Gas consumed = Distance / Miles per gallon
= 94.00 miles / 6.500 miles/gallon
= 14.4615 gallons
Step 2: Calculate the cost of gas for the trip.
Cost of gas = Gas consumed * Cost per gallon
= 14.4615 gallons * $2.459/gallon
= $35.57
Therefore, it will cost $35.57.
Learn more about Unit conversion here:
https://brainly.com/question/11652955
#SPJ7
A 0.5 kilogram piece of aluminum increases its temperature 7 degrees C when heat energy is added. How much heat is produced this change in temperature
Answer: Heat energy (Q) added is 3150 (J) .
Explanation:
How many moles of Ne are contained in a 5.00 L tank at 155°C and 2.80 atm?
There will be 0.39 moles
Take a look at the He gas in the tank:
P = 2.80 atm, or pressure
Volume = 5.00 liters.
T = (273 + 155) is the temperature. K = 428 K
R = 0.08206 L atm/L of gas (mol K)
Charle's law, Boyle's law, and Gay-Lussac law are the three gas laws that make up the combined gas law, commonly referred to as a general gas equation. For a certain amount of gas, the law illustrates the relationship between temperature, volume, and pressure.
Gas law PV = nRT
So, n = PV/. (RT)
He gasses number = 2.80 x 5.00 / (0.08206 x 428) mol equals 0.39 mol.
Learn more about Gas law here-
https://brainly.com/question/12667831
#SPJ9
What is true of a molecule?
A. Each molecule of a compound has different properties.
B. Each atom of a molecule is the same
C. All molecules of a compund have the same properties.
D. All molecules of a compound have one type of atom
The true statement about a molecule is that all molecules of a compound have the same properties and is therefore denoted as option C.
What is an Atom?
This is referred to as the smallest unit of matter without the release of electrically charged particles which include proton, electron etc.
Atoms combine together to form molecules and they are involved in the formation of chemical compounds such as NaCl etc. It consists of identical molecules which means that all of them have the same properties which is therefore the reason why option C was chosen as the most appropriate choice.
Read more about Atom here https://brainly.com/question/6258301
#SPJ1
Answer:
All molecules of a compound have the same properties.
Explanation:
A gas is in a flexible container (volume can change but no gas can escape) at constant pressure. If 1 liter of gas at 300 K is cooled to 100 K (and assuming that it does not condense to a liquid!), what is the volume (in liters) of the gas at 100 K?
The volume of the gas at 100K If 1 liter of gas at 300 K is cooled to 100K is 0.33L.
How to calculate volume?The volume of a gas can be calculated using the following formula:
V1/T1 = V2/T2
Where;
V1 = initial volumeV2 = final volumeT1 = initial temperatureT2 = final temperatureAccording to this question, a gas is in a flexible container. If 1 liter of gas at 300K is cooled to 100K. The volume of the gas is calculated as follows:
1/300 = V2/100
100 × 1 = 300V2
100 = 300V2
V2 = 100/300
V2 = 0.33L
Therefore, the volume of the gas at 100K If 1 liter of gas at 300 K is cooled to 100K is 0.33L.
Learn more about volume at: https://brainly.com/question/24189159
#SPJ1
How much energy will a sample of aluminum
gain when it is warmed from 306 K to 419 K? The
specific heat capacity of aluminum is 0.897 J/g.K,
and the mass of the sample is 5.00 g.
The specific heat capacity of a substance, also known as the massic heat capacity or massic heat capacity in thermodynamics, is the heat capacity of a sample of the substance divided by the mass of the sample. So, the energy gain by sample will be 506J
We know that, the heat energy gained will be calculated by the formula,
Q=mcΔT
where,
Q= Heat energy gained
m=mass
c= specific heat capacity
ΔT= Change in temperature
So, Given,
m= 5.00g ,
ΔT= 419K -306K= 113K
c= 0,897J/gK
Q=mcΔT
Q= 5.0×0.897×113
Q= 506J
So, the energy gained by sample of Aluminum will be 506 J when it is warmed from 306 K to 319K , in which temperature difference is 113K
To know more about specific heat capacity, please refer:
https://brainly.com/question/27991746
#SPJ9
How do you draw this bond-line structure?
Convert 0.00200 g into Mg and answer in scientific notation:
Answer: [tex]2.00x10^{2}[/tex]
Explanation: 1 gram is equal to 1000 Milligrams so
[tex]0.00200g=\frac{1000mg}{1g}[/tex]
Since you go straight across its just multiplication so 0.00200x1000=200mg
To answer it in scientific notation it should just be [tex]2.00x10^{2}[/tex] mg
Questions
Q1.
Use the Periodic Table on page 2 to help you answer this question.
Give the name or symbol of
(a) the element in group 3 and period 4.
Gallium is the element that belongs to the group 3 and the fourth period. Ga is symbol of Gallium.
The element gallium has an atomic number of 31.While highly pure gallium is covered in a dazzling silvery colour, solid gallium is a blue-grey metal with an orthorhombic crystalline structure.It is a crucial part of numerous semiconductors. Due to its capacity to transform power into light, it is additionally used in red LEDs (light emitting diodes).Because of its high boiling point, it is perfect for recording temperatures that would cause a thermometer to vaporise.From iron pyrites, zinc blende, germanite, and bauxite, this metal can be readily removed as a byproduct.Because gallium is a corrosive chemical, it can cause serious skin and eye burns asse well as significant irritation.Learn more about semiconductors here
https://brainly.com/question/1918629
#SPJ9