Statement A, "the isotope at 42.0 amu is less abundant", is true. This is because atomic weight is calculated using the relative abundances of the isotopes. Since the calculated weight is closer to the 40.0 amu isotope, this means that it must be more abundant.
There are two isotopes of a new element, one of which has a weight of 40.0 amu.A greater amount of the isotope exists at 40.0 amu.The two isotopes of a new element have masses of 40.0 and 42.0 amu, respectively.40.50 g/mol represents the atomic weight.
The mass number of an element's isotope can be calculated in what way?Isotopes are variations of a single atom that only differ in the quantity of neutrons in each one.An element's form is determined by the sum of the protons and neutrons in that element:Protons plus neutrons equal mass number.
To know more about isotopes visit:
https://brainly.com/question/29986126
#SPJ4
It is difficult to generate a second action potential during the relative refractory period becausea. The voltage-gated Na+ is already open.b. The voltage-gated Na+ channel has not been reset.c. Voltage gated K+ channels are open.d. Voltage-gated K+ channels have not been reset.e. Both A and B are correct.f. Both C and D are correct.g. All of the above are correct.
The voltage-gated Na+ channels have not yet been reset and some are still open, resulting in the generation of a second action potential during the relative refractory period.
The time period immediately following an action potential during which a neuron is unable to produce another action potential is known as the "refractory phase." Neurons have two different types of refractory periods: absolute refractory period and relative refractory period. The opening of voltage-gated Na+ channels, which stop the membrane from further depolarizing, initiates the absolute refractory period just after an action potential. It is impossible to generate another action potential during this time frame, regardless of the stimulus's potency, which is why it is known as the absolute period.Following the absolute refractory period, the relative refractory period is shorter in duration. The membrane is partially permeable during this time, necessitating a stronger stimulation than usual to initiate another action potential.
Learn more about refractory here:
https://brainly.com/question/13044654
#SPJ4
Auroras are lights that appear at Earth’s northern and southern poles. What is the main cause of an aurora?
A.
Solar wind enters Earth’s atmosphere, and particles interact with ions.
B.
Bubbles of gas are ejected from Earth’s outer crust.
C.
Sunlight reflects off the surface of the Moon during an eclipse.
D.
The northern and southern poles are cooler than the rest of Earth.
Answer:
What is the main cause of an aurora?
The short answer to how the aurora happens is that energetic electrically charged particles (mostly electrons) accelerate along the magnetic field lines into the upper atmosphere, where they collide with gas atoms, causing the atoms to give off light.
Explanation:
for the following compound how many different signals would you see in the carbon nmr? (assume that you can see them all.)
each of the eight carbons in the compound are distinct, producing 1 signal each on a 13C NMR spectrum, totaling to 8 signals.
NMR spectroscopy, in addition to identifying molecules, provides detailed information about their structure, dynamics, reaction state, and chemical environment. The most common types of NMR spectroscopy are proton and carbon-13 NMR spectroscopy, but it is applicable to any sample containing spin-containing nuclei.
Because of the presence of this chiral centre, any plane of symmetry that would make any of its carbon atoms equivalent is ruled out. As a result, each of the compound's eight carbons is distinct, producing one signal on a 13C NMR spectrum, for a total of eight signals.
There are three peaks in the spectrum, indicating that there are only three different environments for the carbons, despite the fact that there are four carbon atoms.
To know more about NMR spectrum:-
https://brainly.com/question/10722669
#SPJ4
if a reaction has a very large equilibrium constant, which of these could also be true of the reaction.
Explanation:
-The reaction is highly favorable
-The reaction is spontaneous
-The reaction is exergonic
-The reaction has a large negative ΔG
What is the density of a piece of granite whose volume is 20 mL and mass is 53
grams?
3.05 g/mL
2.75 g/mL
4.0 g/mL
2.65 g/mL
2.65g/ml is the density of a piece of granite whose volume is 20 mL and mass is 53grams. Density is the mass of a specific material per unit volume.
What is density?Density is the mass of a specific material per unit volume. Density is defined as d = M/V, in which d represents density, M is weight, as well as V is volume. Density is generally expressed in grams every cubic centimetre. Water, for example, has a density of 1 gram per square centimeter, but Earth has a density of 5.51 kilograms per cubic centimetre.
Density is sometimes measured in kilos per cubic centimeter (in metre-kilogram-second or SI units). The density of air, for example, is 1.2 kilos per cubic metre.
density = mass / volume
=53/ 20
=2.65g/ml
Therefore, 2.65g/ml is the density of a piece of granite whose volume is 20 mL and mass is 53grams.
To learn more about density, here:
https://brainly.com/question/13434141
#SPJ1
a student needs to prepare 250 ml of a 0.650 m aqueous solution of sucrose, c12h22o11(aq), which is used frequently in biological experiments.
8.50 of a certain Compound X, known to be made of carbon, hydrogen and perhaps oxygen, and to have a molecular molar mass of 160./gmol, is burned completely in excess oxygen, and the mass of the products carefully measured: product mass carbon dioxide 14.03g water 3.83g
The compound would have a molecular formula of C5H10O2.
What is the empirical formula of the compound?
The empirical formulas is the simplest formula of a compound.
We know that;
Mass of the carbon = 14.03 * 12/44 = 3.82 g
Moles of C = 3.82 g/12 g/mol = 0.32 moles
Mass of water = 3.83 * 2/18 = 0.43 g
Moles of H = 0.43 g/1 g/mol = 0.43 moles
Mass of oxygen = 8.5 - (3.82 + 0.43)
= 4.25 g
Moles of oxygen = 4.25 g/16 g/mol = 0.27 moles
We can now divide through by the lowest ratio;
C - 0.32 H - 0.43 O - 0.27
C - 1 H - 2 O - 1
The empirical formula is CH2O
The molecular formula is;
[12 + 2+ 16]n = 160
n = 160/30
n = 5
The molecular formula is;
C5H10O2
Learn more about molecular formula :https://brainly.com/question/20748250
#SPJ1
the class relationships in manchester described by parkinson's are best explained in the context of the responses
The understanding of the Parkinson's helps to assist the economic classifiacations of the situation.
What are the relationships?Parkinson's classification of Manchester class relationships refers to a social and economic stratification system described by British sociologist and economic historian, Michael Parkinson. He argues that there are three main classes in Manchester, England during the 19th century: the working class, the middle class, and the ruling class.
Each class has distinct characteristics, such as occupation, income, education, and cultural values, that shape their social and economic behavior. Understanding this classification helps explain the responses of individuals and groups within the different classes and how they interact with each other in the context of Manchester's social and economic structures.
Learn more about parkinson's :https://brainly.com/question/28169444
#SPJ1
The positively charged particles found in atoms are called ?
Answer:
Two of the subatomic particles have electrical charges: protons have a positive charge while electrons have a negative charge. Neutrons, on the other hand, don't have a charge.
Explanation:
hope this helps you
Which of the following actions is the first priority of care for a client exhibiting signs and symptoms of coronary artery disease?
A Decrease anxiety
B Enhance myocardial oxygenation
C Administer sublingual nitroglycerin
D Educate the client about his symptoms
The first focus of care for just a client displaying symptoms and signs of coronary heart disease is the activity listed below. B improve the oxygenation of the heart.
Which of the following procedures should be the first priority when treating a client who has coronary artery disease symptoms and signs?The first goal of care is giving the client additional oxygen. In order to help with oxygenation and stop further damage, more oxygen is given because an infarction deprives the myocardium of oxygen.
What medical intervention is the primary and most critical for myocardial infarction?Surgery to sever the coronary arteries. It's open heart surgery here. To construct a new pathway for blood through the heart, a surgeon pulls a healthy blood artery from another section of the body. then the blood travels around the coronary artery that is obstructed or narrowed. When a person is having a heart attack, CABG may be performed as an urgent procedure.
To know more about heart disease visit:
https://brainly.com/question/14950729
#SPJ4
$02 g of iron was added to 50 cm³ of 0.5 mol/dm³
readilute sulfuric acid. When the reaction was
ronover, the mixture was filtered. 0.6 g of iron was
found unreacted. (A₁: Fe = 56.)
b
c
tha Name the limiting reactant in this reaction.
How many moles of iron atoms took part?
How many moles of sulfuric acid reacted?
Write the equation for the reaction, and
deduce the charge on the iron ion that formed.
What volume of hydrogen (calculated at rtp)
bubbled off during the reaction?
a. The limiting reactant in this reaction is sulfuric acid.
b. 0.00357 moles of iron atoms took part in the reaction
c. 0.00357 moles of sulfuric acid reacted.
d. the reaction between iron and sulfuric acid is
Fe + H2SO4 → FeSO4 + H2
The iron ion that forms in this reaction is Fe2+.
e. 9.23 L of hydrogen gas bubbled off during the reaction at 25°C and 1 atm.
What is limiting reactant?The limiting reactant is described as the substance that runs out first, determining the maximum amount of product that can be produced. In this case, the amount of sulfuric acid present limits the amount of iron that can react.
b. Moles of iron atoms:
The number of moles of iron atoms can be calculated as follows:
0.2 g of iron / 56 g/mol = 0.00357 moles of iron
c. Moles of sulfuric acid:
0.00357 moles of iron / 1 mole of sulfuric acid = 0.00357 moles of sulfuric acid
e. Volume of hydrogen:
The volume of hydrogen gas that bubbled off during the reaction can be calculated using the Ideal Gas Law:
PV = nRT
V = nRT / P
V = 0.00357 x 8.31 x 298 / 1 = 9.23 L
In conclusion, 9.23 L of hydrogen gas bubbled off during the reaction at 25°C and 1 atm.
Learn more about limiting reactants at :
https://brainly.com/question/26905271
#SPJ1
a solid aluminum sphere has a mass of 37 g . use the density of aluminum to find the radius of the sphere in inches.
The radius of the sphere is 1.484 cm or 0.58 inches.
The density of aluminum is 2.7 g//cm³. To calculate the radius of the sphere, we can use the formula of density first:
Density = mass/volume
Given that the mass is 37 grams,
2.7 = 37 / V
2.7V = 37
V = 13.7 cm³
The formula for the volume of sphere is V = 4/3 π r³
Plug the numbers:
13.7 = 4/3 * π * r³
13.7 = 4/3 * 22/7 * r³
r³ = 3.269
r = 1.484 cm.
Convert that to inches (1 inch = 2.54 cm) = 0.58 inches.
Learn more about density at https://brainly.com/question/1354972
#SPJ4
the important hormone adrenaline, which has been on shows like firefly and the big bang theory is synthesized in our bodies by what type of chemical reaction
Some of the neurons in the central nervous system and the medulla of the adrenal glands both create adrenaline. In a stressful circumstance, adrenaline is immediately released into the blood, sending signals to the organs to trigger a certain response, within a few minutes.
What causes the body's adrenaline to rise?
Temporarily elevated adrenaline levels are caused by exercise. The majority of us are familiar with the common signs of adrenaline release, such as: rapid heartbeat, high blood pressure, anxiety, excessive sweating, and palpitations, because most individuals are occasionally subjected to stressful situations.
What body part produces adrenaline?
The inner portion of an adrenal gland called the adrenal medulla regulates the hormones that start the flight or fight response. The primary hormones that the adrenal medulla secretes adrenaline.
To know more about adrenaline visit:
brainly.com/question/13428382
#SPJ4
what type of bond does an unsaturated fatty acid contain that a saturated fatty acid does not? (figure 2-15)
An unsaturated fatty acid contains a double bond, which a saturated fatty acid does not.
Unsaturated fatty acids contain double bonds between some of the carbon atoms in their hydrocarbon chains, while saturated fatty acids have single bonds between all of their carbon atoms. These double bonds disrupt the continuity of the hydrocarbon chain, making unsaturated fatty acids less dense and more fluid at room temperature than saturated fatty acids. The double bonds also affect the chemical reactivity of the fatty acid and its ability to form hydrogen bonds with water molecules, among other things. This difference in bonding is why unsaturated fatty acids are considered healthier than saturated fatty acids, as they can help lower cholesterol levels in the blood and reduce the risk of heart disease.
Learn more about fatty acids here: brainly.com/question/13528495
#SPJ4
Explain why the Velocity of a recoiling gun is lower than that of ejected bullet
The velocity of an object is dependent on its mass. The mass of gun is greater the mass of a bullet. Hence, lower mass leads to greater velocity for bullet.
What is velocity ?Velocity of an object is the measure of the distance it covered within unit time. It is the rate of speed. Velocity is a vector quantity having both direction and magnitude.
The velocity of an object depends on its mass, medium of travel, frictional force or any air resistance if present etc.
As the mass increases, the more force have to applied to speed up the object. Here, the gun is having a backward force due to its mass and this force for a bullet is negligible for a bullet having very less mass.
Therefore, the bullet have greater velocity than a gun.
Find more on velocity :
https://brainly.com/question/18084516
#SPJ1
Elements with atomic numbers of 104 and greater are known as super-heavy elements. None of these elements have been found in nature but instead have been made in a laboratory. They are very difficult and expensive to create, and they break down into other elements quickly. There currently are no practical applications for any of these elements. However, some scientists believe that, with further work, they may discover some isotopes and super-heavy elements that are move stable and that could possibly have practical implications. Do you think that scientists should continue to try and create super-heavy elements and expand the periodic table? explain why or why not
The goals of scientific research are to further knowledge and address pressing issues. This assisted us in comprehending the state of the art.
What is super-heavy elements?Chemical elements with an atomic number greater than 103 are referred to as superheavy elements, transactinide elements, transactinides, or super-heavy elements. The periodic table's superheavy elements are the ones that follow the actinides; lawrencium is the final actinide.
Superheavy elements are transuranium elements by definition, meaning they have atomic numbers higher than uranium (92). Lawrencium could also be added to conclude the 6d series, in accordance with the definition of 3 groups that the authors use. The goals of scientific research are to further knowledge and address pressing issues. This assisted us in comprehending the state of the art.
Therefore, the goals of scientific research are to further knowledge and address pressing issues. This assisted us in comprehending the state of the art.
To learn more about super-heavy elements, here:
https://brainly.com/question/11131999
#SPJ1
if 10 moles of a3 are reacted with excess b2, how many moles of ab will be produced? very carefully enter the number below.
The amount of moles of AB produced depends on the chemical equation for the reaction of A3 and B2. Without the chemical equation, it is not possible to determine the amount of moles of AB that will be produced.
About MoleMole comes from the word moles which means a certain amount of mass or in other water a small amount of mass. In chemistry, the mole is the unit for the amount of a substance. In the field of physics, mole has a standard definition as the amount of mass of a substance that contains as many particles as atoms contained in 12 grams of C-12.
Learn More about mole at brainly.com/question/15356425
#SPJ4
consider the chromate/dichromate ion equilibrium what color will solution be if it contains onyly k2cro4
In reactions where potassium dichromate changes color, the orange color of potassium dichromate can be employed to good use. In many reactions, it is therefore also utilized as an indication.
What causes the yellow to orange hue of potassium chromate to change?The yellow color of the potassium chromate solution changes to orange as nitric acid is introduced. The potassium chromate solution changes from orange to yellow when sodium hydroxide is introduced.
What causes potassium chromate to be yellow?Yellow is the color of potassium chromate. Chromate ion is where the derives from. The material starts to change color to orange, like the dichromate ion, when nitric acid is added. Orangeness increases with increasing acidity.
To know more about dichromate visit :-
https://brainly.com/question/25318439
#SPJ4
Measure the height of the column of gas in the tube. (Click the ruler and capillary tube.)
The temperature of the columns is 40 degrees. From the image that has been attached to the answer.
How do we measure the temperature?We know that in the case of this set up that we would have to read the set up and the position of the lines and the point where we can see the end of the thread of the mercury line of the thermometer.
The thermometer can be defined as device that can be used in the measurement of temperature and in this case, we are having the temperature of the set up that is shown in the image that is attached.
Learn more about measurement:https://brainly.com/question/4725561
#SPJ1
calculate the h3o /oh- ratio for solutions of your choice using all three values: the molecule count, quantity of moles, and concentration show your work
There are 10^7 times more H3O+ ions than OH- ions in the solution because the H3O+/OH- ratio is 10^7.
a mixture of two or more substances is called a solution. The components are dissolved in water to create an aqueous solution. The quantity of the solute (the item being dissolved) in a specified amount of the solvent is referred to as the concentration of a solution (water). The molecular weight, number of moles, or concentration of the ions in an aqueous solution can all be used to calculate the H3O+/OH- ratio. For instance, if the solution contains 0.1 M of HCl, the concentration of H3O+ ions will be 0.1 M, or equal to the addition of 0.1 M of HCl. Since OH- ions are always present in neutral solutions at a concentration of 1 x 10-7 M, the H3O+/OH- ratio can be computed as 0.1 M / 1 x 10-7 M.
Learn more about Solution here :
https://brainly.com/question/29263728
#SPJ4
which of the following methods can be used to prepare an alkenylbenzene in one synthetic step? (select all that apply.)
The methods that can be used to prepare alkyl benzene in one steps includes the dehydration of a benzylic alcohol, dehydrogenation of an alkylbenzene and dehydrohalogenation of a benzylic halide.
Several reagents can be used to carry out the side-chain oxidation of an alkylbenzene. Among the most commonly used reagents are:
Alkylbenzene substrate
Oxidizing agent (such as sodium hypochlorite or potassium permanganate)
Acid catalysts (such as sulfuric acid or hydrochloric acid)
Solvent (such as water or methanol)
such as, Chromium trioxide (CrO3) and a mixture of sulfuric acid (H2SO4) and nitric acid (HNO3)
Sodium hypochlorite (NaClO)
Potassium permanganate (KMnO4)
Sodium chlorite (NaClO2) and sodium hydroxide (NaOH)
Osmium tetroxide (OsO4) and hydrogen peroxide (H2O2)
Learn more about alkylbenzene:
brainly.com/question/30420544
#SPJ4
6.8 % C , 3.0 % O , and 90.2 % Br Express your answer as a chemical formula.
The formula is written for the compound as C3OBr6
What is the empirical formula?The empirical formula is the simplest whole number ratio of the atoms of the elements present in a compound. It represents the lowest whole number ratio of atoms in a molecule of a chemical substance. The empirical formula is determined by analyzing the elemental composition of a compound, either through chemical analysis or spectroscopic techniques.
We would then have that;
C - 6.8/12 O - 3.0/16 Br - 90.2/80
C - 0.57 O - 0.19 Br - 1.12
Dividing through by the lowest ratio we have;
C - 3 O - 1 B r - 6
Learn more about empirical formula:https://brainly.com/question/14044066
#SPJ1
What is the ratio of
coefficients when this
equation is balanced?
Al + HCl ->AlCl3 + H₂
The ratio of coefficients when the chemical equation Al + HCl ->AlCl₃ + H₂ is balanced is 2:6:2:3.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ1
what is the pH of a solution that contains 0.0425 moles of HCl in 6.50 litres of water?
Answer:
To find the pH of a solution that contains a strong acid like HCl, you can use the equation:
pH = -log[H+]
Where [H+] is the concentration of hydrogen ions in moles per liter. In this case, you know the concentration of HCl and the volume of water, so you can calculate the concentration of hydrogen ions by using the equation:
[H+] = (0.0425 moles HCl) / (6.50 liters water) = 0.0653846 moles/liter
Finally, you can calculate the pH:
pH = -log[0.0653846 moles/liter] = 1.18
So the pH of the solution is 1.18.
Explanation:
Do you want to know shot trick also?
The distance between the K+ and Cl- ions inKCl is 2.8 × 10-10 m.Find the energy required to separate thetwo ions to an infinite distance apart, assum-ing them to be point charges initially at rest.The elemental charge is 1.6 × 10-19 C and theCoulomb constant is 8.99 × 109 N · m2/C2.1. 709.1 eV2. 8.91 eV3. 101.3 eV4. 5.14 eV5. 6.77 eV6. 4.37 eV
1. 709.1 eV. The energy required to separate the K+ and Cl- ions in KCl to an infinite distance apart can be calculated using the equation: E = k * Q1 * Q2 / r
where k is the Coulomb constant (8.99 × 10^9 N · m^2/C^2), Q1 and Q2 are the magnitudes of the charges of K+ and Cl- ions (1.6 × 10^-19 C), and r is the distance between the ions (2.8 × 10^-10 m). Plugging in the values, we get:
E = 8.99 × 10^9 N · m^2/C^2 * 1.6 × 10^-19 C * 1.6 × 10^-19 C / 2.8 × 10^-10 m
E = 709.1 eV
So, the answer is 1. 709.1 eV.
Learn more about ions here: brainly.com/question/14982375
#SPJ4
f a simple distillation were to be performed on this mixture( from question 1 ), what would be the composition of the initial distillate?
By applying the formula y = ( * x) / 1 + ( -1) * x, where "" denotes relative volatility, "x" denotes the mole fraction of the substance in the liquid, and "y" is the mole fraction of the substance distillation in the vapour, you may determine the mole fraction of a chemical in a vapour.
What exactly is the simple distillation mixture?
Definition: A technique for separating mixes in a boiling liquid combination based on differences in their volatilities. After applying heat to a sample mixture, the components are instantly cooled by the action of cold water in a condenser.
In distillation Mcq, what exactly is the distillate?
In distillation, what exactly is the distillate? Explanation: The vapour in a distillation column that is collected, condensed into a liquid, and collected in the collecting flask is referred to as a distillate in the distillation process.
To know more about distillation visit:
brainly.com/question/29037176
#SPJ4
If you had a 253.7 g sample of phosphorous acid, what mass of phosphorus would be present in the sample? ASAP!
According to stoichiometry, the mass of phosphorus would be present in the sample is 77.66 grams.
What is stoichiometry?It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.
In the given example, 98 g of phosphorous acid has 30 g phosphorous, thus 253.7 g sample of phosphorous acid will have 253.7×30/98=77.66 grams.
Thus, the mass of phosphorus would be present in the sample is 77.66 grams.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ1
What mass of solid FeCl3 is formed when 200 mL of 0.375 N Fe3+ is mixed with 400 mL of 0.175 N Cl2?
Please anwer
Answer:
4.05 g
Explanation:
The balanced chemical equation for the reaction between Fe3+ and Cl2 is:
Fe3+ + 3 Cl2 -> FeCl3
To find the amount of FeCl3 formed, we need to find the limiting reactant and then calculate the amount of product that can be formed.
First, we calculate the number of moles of Fe3+ and Cl2:
Fe3+: 0.375 N * 200 mL = 0.075 mol
Cl2: 0.175 N * 400 mL = 0.07 mol
Since Fe3+ is the limiting reactant, we can use its moles to determine the amount of FeCl3 that can be formed:
0.075 mol Fe3+ * (1 mol FeCl3 / 3 mol Cl2) = 0.025 mol FeCl3
Finally, to find the mass of FeCl3, we use its molar mass:
0.025 mol FeCl3 * 162.2 g/mol = 4.05 g FeCl3.
So, 4.05 g of FeCl3 is formed when 200 mL of 0.375 N Fe3+ is mixed with 400 mL of 0.175 N Cl2.
cacl2 is found in the rutile structure where the ca2 ions (small black sphere) are surrounded by six cl- ions (large spheres), forming an octahedral environment with coordination number, cn
Calcium chloride (CaCl2) is found in the rutile structure, where calcium ions (Ca2+) are surrounded by six chloride ions (Cl-) to form an octahedral coordination environment with a coordination number (CN) of 6.
Certainly! The coordination number of a molecule refers to the number of atoms, ions, or molecules that surround a central atom or ion in a coordination complex or coordination compound. The coordination number of CaCl2 in the rutile structure is 6, which means that each calcium ion is surrounded by 6 chloride ions.
The octahedral coordination environment is a geometric arrangement where a central atom or ion is surrounded by six other atoms or ions, arranged at the vertices of an imaginary octahedron. This shape can be thought of as two pyramids joined at their bases. In the case of CaCl2 in the rutile structure, the calcium ions occupy the center of the octahedron and the chloride ions occupy the vertices of the structure.
To learn more about octahedral coordination please click on below link:
https://brainly.com/question/9878394
#SPJ4
Please Help! I need to fill in the blanks on my 04.06 Reactions in our World Chemistry Lab Report!!!
All of the reactions that have been showed would lead to the formation of a positive product.
What is common to all the reactions?We know that when we talk about a chemical reaction there is the combination of the reactants and they result in the formation of the products. The nature of the products that cane be formed would depend on the way that the reactants have been arranged.
In this case, we can see that all the reactions that have been shown in the image are such that there is a gaseous product that is obtained in the reaction.
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1